EXTREME-TRAP-MIB: View SNMP OID List / Download MIB

VENDOR: EXTREME NETWORKS

Home	MIB: EXTREME-TRAP-MIB
Download as:		SNMPv2-CONF, IF-MIB, EXTREME-VLAN-MIB, SNMPv2-SMI, SNMPv2-MIB, EXTREME-ESRP-MIB, EXTREME-BASE-MIB, SNMPv2-TC, EXTREME-EDP-MIB, EXTREME-SYSTEM-MIB		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
extremeOverheat	1.3.6.1.4.1.1916.0.6			A overheat trap indicates that the on board tempature sensor has reported a overheat condition. System will shutdown until unit has suficiently cooled such that operation may begin again. A cold start trap will be issued when the unit has come back on line.
extremeFanfailed	1.3.6.1.4.1.1916.0.7			A fan failed trap indicates one or more of the cooling fans inside the device has failed. A fanOK trap will be sent once the fan has attained normal operation.
extremeFanOK	1.3.6.1.4.1.1916.0.8			A fan has transitioned out of a failure state and is now operating correctly.
extremeInvalidLoginAttempt	1.3.6.1.4.1.1916.0.9			A user attempted to login to console or by telnet but was refused access due to incorrect username or password
extremePowerSupplyFail	1.3.6.1.4.1.1916.0.10			One or more sources of power to this agent has failed. Presumably a redundant power-supply has taken over.
extremePowerSupplyGood	1.3.6.1.4.1.1916.0.11			One or more previously bad sources of power to this agent has come back to life without causing an agent restart.
extremeRpsAlarm	1.3.6.1.4.1.1916.0.12			Attached Redundant Power Supply device is indicating an alarm condition.
extremeRpsNoAlarm	1.3.6.1.4.1.1916.0.13			Attached Redundant Power Supply device is no longer indicating an alarm condition.
extremeSmartTrap	1.3.6.1.4.1.1916.0.14			Signifies that the value of one of the object identifiers (or the value of an object below that in the MIB tree) defined in the extremeSmartTrapRulesTable has changed, and hence a new entry has been created in the extremeSmartTrapInstanceTable. Such a trap is sent at most once every thirty seconds if one or more entry was created in the last thirty seconds.
extremeModuleStateChanged	1.3.6.1.4.1.1916.0.15			Signifies that the value of the extremeSlotModuleState for the specified extremeSlotNumber has changed.
extremeEsrpStateChange	1.3.6.1.4.1.1916.0.17			Signifies Esrp state change
extremeSlbUnitAdded	1.3.6.1.4.1.1916.0.18			The server load balancer has activated a group of virtual servers that it normally would not activate. This may be due to the failure of another server load balancer.
extremeSlbUnitRemoved	1.3.6.1.4.1.1916.0.19			The server load balancer has deactivated a group of virtual servers that it normally has active. This indicates that something is wrong in the server load balancer; for example, its ping check may be failing.
extremeEdpNeighborAdded	1.3.6.1.4.1.1916.0.20			This node discovers a new neighbor through Extreme Discovery Protocol.
extremeEdpNeighborRemoved	1.3.6.1.4.1.1916.0.21			No EDP updates are received from this neighbor within the configured timeout period and this neighbor entry is aged out by the device.