WWP-LEOS-CFM-MIB: View SNMP OID List / Download MIB

VENDOR: WORLD WIDE PACKETS


 Home MIB: WWP-LEOS-CFM-MIB
Download as:   
SNMPv2-CONF, WWP-SMI, SNMPv2-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wwpLeosCfmMIB 1.3.6.1.4.1.6141.2.60.35
Connectivity Fault Management (CFM) MIB for configuration and monitoring CFM
       wwpLeosCfmMIBObjects 1.3.6.1.4.1.6141.2.60.35.1
           wwpLeosCfmGlobal 1.3.6.1.4.1.6141.2.60.35.1.1
               wwpLeosCfmState 1.3.6.1.4.1.6141.2.60.35.1.1.1 integer read-write
This object allows to globally configure CFM state. Enumeration: 'disabled': 1, 'enabled': 2.
               wwpLeosCfmEtherType 1.3.6.1.4.1.6141.2.60.35.1.1.2 ethtype read-write
This object specifies the Ethernet type value for CFM frames.
               wwpLeosCfmMEPHoldTime 1.3.6.1.4.1.6141.2.60.35.1.1.3 integer32 read-write
This object specifies the Time in ms to hold a MEP in an inactive state.
               wwpLeosCfmCcmAvailable 1.3.6.1.4.1.6141.2.60.35.1.1.4 counter32 read-only
This object specifies the current CCM available.
               wwpLeosCfmY1731EtherType 1.3.6.1.4.1.6141.2.60.35.1.1.5 ethtype read-write
This object specifies the Optional Alternate Ethernet type for Y.1731 frames.
               wwpLeosCfmL2LoopDetectState 1.3.6.1.4.1.6141.2.60.35.1.1.6 integer read-write
This object allows to globally configure CFM's Layer 2 Loop detection state. Frames received by the switch that have a Source MAC of the the switch will be discarded. Enumeration: 'on': 2, 'off': 1.
               wwpLeosCfmDot1adStrict 1.3.6.1.4.1.6141.2.60.35.1.1.7 integer read-write
Controls compliance of processing 802.1ad encapsulated CFM frames in accordance with the 8021.ag standard. When on (1) CFM frames containing more than one VLAN tag are forwarded as normal data frames, bypassing processing by MEPs and MIPs. When off (2) CFM frames with multiple VLAN tags are subject to normal CFM processing. Enumeration: 'on': 1, 'off': 2.
               wwpLeosCfmMipLevelEnforcement 1.3.6.1.4.1.6141.2.60.35.1.1.8 integer read-write
Controls enforcement of a MIPs associated MD Level. When on (1) a MIP will only process CFM messages received at its level. When off (2) a MIP will process frames received at any level. Enumeration: 'on': 1, 'off': 2.
               wwpLeosCfmMipCcmDbState 1.3.6.1.4.1.6141.2.60.35.1.1.9 integer read-write
The administrative state of the MIP CCM Database. A MIP only records CCMs in the MIP CCM Database when this object is set to enable (1). Enumeration: 'enable': 1, 'disable': 2.
               wwpLeosCfmLBMDefaultCount 1.3.6.1.4.1.6141.2.60.35.1.1.10 integer32 read-write
The global default loopback message count.
               wwpLeosCfmLBMDefaultInterval 1.3.6.1.4.1.6141.2.60.35.1.1.11 integer32 read-write
The global default loopback message interval.
               wwpLeosCfmLBMDefaultTimeout 1.3.6.1.4.1.6141.2.60.35.1.1.12 integer32 read-write
The global default loopback message timeout.
               wwpLeosCfmFrameClassifierMode 1.3.6.1.4.1.6141.2.60.35.1.1.13 integer read-write
Configures the hardware frame classification mode used to detect CFM and Y.1731 frames that should be sent to the CPU for processing. Changing this mode will cause a reboot of the device. Enumeration: 'etype': 1, 'etypeMd': 2.
               wwpLeosCfmGlobalLBMDefaultCount 1.3.6.1.4.1.6141.2.60.35.1.1.16 integer32 read-write
The global default loopback message count.
               wwpLeosCfmGlobalLBMDefaultInterval 1.3.6.1.4.1.6141.2.60.35.1.1.17 integer32 read-write
The global default loopback message interval.
               wwpLeosCfmGlobalLBMDefaultTimeout 1.3.6.1.4.1.6141.2.60.35.1.1.18 integer32 read-write
The global default loopback message timeout.
               wwpLeosCfmGlobalFrameClassifierMode 1.3.6.1.4.1.6141.2.60.35.1.1.19 integer read-write
Configures the hardware frame classification mode used to detect CFM and Y.1731 frames that should be sent to the CPU for processing. Changing this mode will cause a reboot of the device. Enumeration: 'etype': 1, 'etypeMd': 2.
               wwpLeosCfmGlobalFrameBudget 1.3.6.1.4.1.6141.2.60.35.1.1.24
                     wwpLeosCfmGlobalControlModuleFrameBudget 1.3.6.1.4.1.6141.2.60.35.1.1.24.1 counter32 read-only
Control Module Frame Budget . Not applicable to 6.x
                     wwpLeosCfmGlobalFrameBudgetTable 1.3.6.1.4.1.6141.2.60.35.1.1.24.2 no-access
Global Frame Budget Table
                         wwpLeosCfmGlobalFrameBudgetEntry 1.3.6.1.4.1.6141.2.60.35.1.1.24.2.1 no-access
An entry (conceptual row) in the wwpLeosCfmServiceTable. Not applicable to 6.x
                             wwpLeosCfmGlobalFrameBudgetSlotIndex 1.3.6.1.4.1.6141.2.60.35.1.1.24.2.1.1 unsigned32 no-access
Slot Index
                             wwpLeosCfmGlobalFrameBudgetValue 1.3.6.1.4.1.6141.2.60.35.1.1.24.2.1.2 counter32 read-only
Frame budget value
               wwpLeosCfmGlobalStats 1.3.6.1.4.1.6141.2.60.35.1.1.25
                     wwpLeosCfmStatsTotalTx 1.3.6.1.4.1.6141.2.60.35.1.1.25.1 counter64 read-only
The number of frames sent.
                     wwpLeosCfmStatsTotalRx 1.3.6.1.4.1.6141.2.60.35.1.1.25.2 counter64 read-only
The number of frames received.
                     wwpLeosCfmStatsTxFloodedFrames 1.3.6.1.4.1.6141.2.60.35.1.1.25.3 counter64 read-only
The number of Flooded frames sent.
                     wwpLeosCfmStatsTxFloodedIgnoredStpState 1.3.6.1.4.1.6141.2.60.35.1.1.25.4 counter64 read-only
The number of flooded ignored frames sent.
                     wwpLeosCfmStatsRxTotalValidFrames 1.3.6.1.4.1.6141.2.60.35.1.1.25.5 counter64 read-only
The number of valid frames received.
                     wwpLeosCfmStatsRxTotalNotValidatedFrames 1.3.6.1.4.1.6141.2.60.35.1.1.25.6 counter64 read-only
The number of not validated frames received.
                     wwpLeosCfmStatsRxTotalInValidFrames 1.3.6.1.4.1.6141.2.60.35.1.1.25.7 counter64 read-only
The number of invalid frames received.
                     wwpLeosCfmTotalRxInvalidMessageOverflow 1.3.6.1.4.1.6141.2.60.35.1.1.25.8 counter64 read-only
The number of invalid message overflow frames received.
                     wwpLeosCfmTotalRxInvalidPortStatusTLV 1.3.6.1.4.1.6141.2.60.35.1.1.25.9 counter64 read-only
The number of invalid port status TLV received.
                     wwpLeosCfmTotalRxInvalidInterfaceStatusTLV 1.3.6.1.4.1.6141.2.60.35.1.1.25.10 counter64 read-only
The number of invalid interface status TLV received.
                     wwpLeosCfmTotalRxInvalidSenderIDTLV 1.3.6.1.4.1.6141.2.60.35.1.1.25.11 counter64 read-only
The number of invalid sender ID TLV received.
                     wwpLeosCfmRxAdminDisableDropped 1.3.6.1.4.1.6141.2.60.35.1.1.25.12 counter64 read-only
The number of frames dropped when in admin disable mode.
                     wwpLesoCfmRxInvalidEtypeDropped 1.3.6.1.4.1.6141.2.60.35.1.1.25.13 counter64 read-only
The number of frames dropped when in admin disable mode.
                     wwpLeosCfmRxInvalidOpCodeDropped 1.3.6.1.4.1.6141.2.60.35.1.1.25.14 counter64 read-only
The number of received Invalid Opcode frames dropped.
                     wwpLeosCfmRxSTPStateNotForwardingDropped 1.3.6.1.4.1.6141.2.60.35.1.1.25.15 counter64 read-only
The number of frames dropped when system is not in STP forwarding mode.
                     wwpLeosCfmGlobalStatsClear 1.3.6.1.4.1.6141.2.60.35.1.1.25.16 integer read-write
Setting this object to clear will clear statistics globally (Global Stats, Service Stats and Mep Stats). This object cannot be set to none. Enumeration: 'clear': 1, 'none': 2.
                     wwpLeosCfmGlobalLoopbackMsgStatsClear 1.3.6.1.4.1.6141.2.60.35.1.1.25.17 integer read-write
Setting this object to clear will clear Loopback Statistics globally(Global stats, Service Stats and Mep Stats). Enumeration: 'clear': 1, 'none': 2.
                     wwpLeosCfmGlobalLinkTraceMsgStatsClear 1.3.6.1.4.1.6141.2.60.35.1.1.25.18 integer read-write
Setting this object to clear will clear Link Trace Statistics globally(Global stats, Service Stats and Mep Stats). Enumeration: 'clear': 1, 'none': 2.
                     wwpLeosCfmGlobalDelayMeasurementMsgStatsClear 1.3.6.1.4.1.6141.2.60.35.1.1.25.19 integer read-write
Setting this object to clear will clear Delay Measurement Statistics globally(Global stats, Service Stats and Mep Stats). Enumeration: 'clear': 1, 'none': 2.
                     wwpLeosCfmGlobalLossMeasurementMsgStatsClear 1.3.6.1.4.1.6141.2.60.35.1.1.25.20 integer read-write
Setting this object to clear will clear Loss Measurement Statistics globally(Global stats, Service Stats and Mep Stats). Enumeration: 'clear': 1, 'none': 2.
                     wwpLeosCfmTotalRxDropBlockedOppositeMep 1.3.6.1.4.1.6141.2.60.35.1.1.25.21 counter64 read-only
The number of received Blocked by Opposite Mep frames dropped.
                     wwpLeosCfmGlobalCCMStats 1.3.6.1.4.1.6141.2.60.35.1.1.25.26
                           wwpLeosCfmTotalTxCCM 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.1 counter64 read-only
The total number of CCM frames sent.
                           wwpLeosCfmTotalTxCCMFlooded 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.2 counter64 read-only
The total number of flooded CCM frames sent.
                           wwpLeosCfmTotalRxValidCCM 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.3 counter64 read-only
The number of valid frames received.
                           wwpLeosCfmTotalRxCCMInSequence 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.4 counter64 read-only
The number of CCM frames received in sequence.
                           wwpLeosCfmTotalRxCCMSequenceError 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.5 counter64 read-only
The number of errored CCM frames received in sequence.
                           wwpLeosCfmTotalCCMRxMDLevelXcon 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.6 counter64 read-only
The number of MD Level CFM frames received.
                           wwpLeosCfmTotalCCMRxMAIDXcon 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.7 counter64 read-only
The number of MAID Xcon CFM frames received.
                           wwpLeosCfmTotalRxCCMErrorOnMepId 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.8 counter64 read-only
The number of frames dropped when in admin disable mode.
                           wwpLeosCfmTotalRxCCMIntervalError 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.9 counter64 read-only
The number of interval error frames received.
                           wwpLeosCfmTotalRxInvalidCCM 1.3.6.1.4.1.6141.2.60.35.1.1.25.26.10 counter64 read-only
The number of invalid CCM frames received.
                     wwpLeosCfmGlobalLoopbackStats 1.3.6.1.4.1.6141.2.60.35.1.1.25.27
                           wwpLeosCfmTotalTxLBM 1.3.6.1.4.1.6141.2.60.35.1.1.25.27.1 counter64 read-only
The number of Loopback messages sent.
                           wwpLeosCfmTotalTxLBR 1.3.6.1.4.1.6141.2.60.35.1.1.25.27.2 counter64 read-only
The total number of Loopback Replies frames sent.
                           wwpLeosCfmTotalRxInOderLBR 1.3.6.1.4.1.6141.2.60.35.1.1.25.27.3 counter64 read-only
The total number of In order LBR frames received.
                           wwpLeosCfmTotalRxOOOLBR 1.3.6.1.4.1.6141.2.60.35.1.1.25.27.4 counter64 read-only
The number of Out of Order LBR frames received.
                           wwpLeosCfmTotalRxContentMismatchLBR 1.3.6.1.4.1.6141.2.60.35.1.1.25.27.5 counter64 read-only
The number of Content Mismatch LBR frames received.
                           wwpLeosCfmTotalRxUnexpectedLBR 1.3.6.1.4.1.6141.2.60.35.1.1.25.27.6 counter64 read-only
The number of unexpected LBR frames received.
                           wwpLeosCfmTotalRxInvalidLBR 1.3.6.1.4.1.6141.2.60.35.1.1.25.27.7 counter64 read-only
The number of invalid LBR frames received.
                           wwpLeosCfmTotalRxvalidLBM 1.3.6.1.4.1.6141.2.60.35.1.1.25.27.8 counter64 read-only
The number of valid LBM frames received.
                           wwpLeosCfmTotalRxInvalidLBM 1.3.6.1.4.1.6141.2.60.35.1.1.25.27.9 counter64 read-only
The number of invalid LBM frames received.
                     wwpLeosCfmGlobalLinkTraceStats 1.3.6.1.4.1.6141.2.60.35.1.1.25.28
                           wwpLeosCfmTotalTxLTM 1.3.6.1.4.1.6141.2.60.35.1.1.25.28.1 counter64 read-only
The number of LTM frames sent.
                           wwpLeosCfmTotalTxLTR 1.3.6.1.4.1.6141.2.60.35.1.1.25.28.2 counter64 read-only
The total number of LTR frames sent.
                           wwpLeosCfmTotalRxValidLTM 1.3.6.1.4.1.6141.2.60.35.1.1.25.28.3 counter64 read-only
The total number of LTM frames received.
                           wwpLeosCfmTotalRxValidLTR 1.3.6.1.4.1.6141.2.60.35.1.1.25.28.4 counter64 read-only
The total number of Valid LTR frames received.
                           wwpLeosCfmTotalRxUnexpectedLTR 1.3.6.1.4.1.6141.2.60.35.1.1.25.28.5 counter64 read-only
The total number of unexpected LTR frames received.
                           wwpLeosCfmTotalRxInvalidLTR 1.3.6.1.4.1.6141.2.60.35.1.1.25.28.6 counter64 read-only
The total number of Invalid LTR frames received.
                           wwpLeosCfmInvalidLTRRelayAction 1.3.6.1.4.1.6141.2.60.35.1.1.25.28.7 counter64 read-only
The total number of Invalid LTR Action.
                           wwpLeosCfmTotalRxInvalidLTM 1.3.6.1.4.1.6141.2.60.35.1.1.25.28.8 counter64 read-only
The total number of Invalid LTM frames received.
                           wwpLeosCfmRxUnresolvedLTM 1.3.6.1.4.1.6141.2.60.35.1.1.25.28.9 counter64 read-only
The total number of Unresolved LTM frames received.
                     wwpLeosCfmGlobalDelayMeasurementStats 1.3.6.1.4.1.6141.2.60.35.1.1.25.29
                           wwpLeosCfmTotalTxDMM 1.3.6.1.4.1.6141.2.60.35.1.1.25.29.1 counter64 read-only
The total number of Delay Measurements messages sent.
                           wwpLeosCfmTotalTxDMR 1.3.6.1.4.1.6141.2.60.35.1.1.25.29.2 counter64 read-only
The total number of Delay Measurements Reply sent.
                           wwpLeosCfmTotalRxDMM 1.3.6.1.4.1.6141.2.60.35.1.1.25.29.3 counter64 read-only
The total number of Delay Measurements Messages received.
                           wwpLeosCfmTotalRxDMR 1.3.6.1.4.1.6141.2.60.35.1.1.25.29.4 counter64 read-only
The total number of Delay Measurements Reply received.
                     wwpLeosCfmGlobalLossMeasurementStats 1.3.6.1.4.1.6141.2.60.35.1.1.25.30
                           wwpLeosCfmTotalTxLMM 1.3.6.1.4.1.6141.2.60.35.1.1.25.30.1 counter64 read-only
The total number of Loss Measurements messages sent.
                           wwpLeosCfmTotalTxLMR 1.3.6.1.4.1.6141.2.60.35.1.1.25.30.2 counter64 read-only
The total number of Loss Measurements Reply frames sent.
                           wwpLeosCfmTotalRxLMM 1.3.6.1.4.1.6141.2.60.35.1.1.25.30.3 counter64 read-only
The total number of LMM received.
                           wwpLeosCfmTotalRxLMR 1.3.6.1.4.1.6141.2.60.35.1.1.25.30.4 counter64 read-only
The total number of LMR received.
           wwpLeosCfmService 1.3.6.1.4.1.6141.2.60.35.1.2
               wwpLeosCfmServiceTable 1.3.6.1.4.1.6141.2.60.35.1.2.1 no-access
The (conceptual) table listing the configuration parameters for the CFM Service Table. To create an entry in this table the following criteria must be followed: wwpLeosCfmServiceType must be specified. wwpLeosCfmServiceValue must be specified. wwpLeosCfmServiceName must be specified. wwpLeosCfmServiceStatus must be set to createAndGo.
                   wwpLeosCfmServiceEntry 1.3.6.1.4.1.6141.2.60.35.1.2.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmServiceTable.
                       wwpLeosCfmServiceIndex 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.1 unsigned32 read-only
A unique identifier for CFM service entry.
                       wwpLeosCfmServiceType 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.2 integer read-only
This object is used to specify the service type. Interpretation of wwpLeosCfmServiceValue depends on the value of this MIB object. This MIB object along with wwpLeosCfmServiceValue must be unique for each entry in this table Enumeration: 'ethVs': 2, 'vlan': 3, 'vs': 5, 'other': 9, 'pbtTunnel': 4, 'mplsVs': 1.
                       wwpLeosCfmServiceValue 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.3 integer read-only
This object is used to specify the service value. Interpretation of this object depends on the value of wwpLeosCfmServiceType. This MIB object along with wwpLeosCfmServiceType must be unique for each entry in this table
                       wwpLeosCfmServiceAdminState 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.4 integer read-write
This object specifies the admin state of CFM for this service type. Enumeration: 'disabled': 1, 'enabled': 2.
                       wwpLeosCfmServiceOperState 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.5 integer read-only
The operational state of CFM for this service type. Enumeration: 'disabled': 1, 'enabled': 2.
                       wwpLeosCfmServiceAlarmTime 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.6 integer read-write
This MIB object allows to set the time interval that a service fault detected by wwpLeosCfmServiceType must be present prior to triggering a fault alarm.
                       wwpLeosCfmServiceCCMInterval 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.7 integer read-write
This MIB object allows to set the CCM transmission interval index for the service specified by wwpLeosCfmServiceType. This determines the frequency at which CCMs are transmitted. The length of the interval increases exponentially with the index value. Setting the interval to 0 disables CCM transmission from all MEPs in the MA.
                       wwpLeosCfmServiceName 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.9 displaystring read-only
This MIB object allows to set the CFM service name.
                       wwpLeosCfmServiceMdLevel 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.10 integer read-only
This MIB object sets the CFM service level which associates it with a Maintenance Domain.
                       wwpLeosCfmServiceResetTime 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.11 integer read-write
This MIB object set the time interval during which no service faults can be detected before the service will reset a fault alarm.
                       wwpLeosCfmServiceLastFaultCCM 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.12 cfmdisplaystring read-only
This MIB object shows last received CCM fault.
                       wwpLeosCfmServiceRMEPFailureFlag 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.13 truthvalue read-only
This MIB object shows the RMEP failure flag.
                       wwpLeosCfmServiceCCMErrorFlag 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.14 truthvalue read-only
This MIB object shows the CCM Error flag.
                       wwpLeosCfmServiceCrossConnectErrorFlag 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.15 truthvalue read-only
This MIB object shows the cross-connect Error flag.
                       wwpLeosCfmServiceNumMEP 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.16 counter32 read-only
This MIB object shows Number of MEPs.
                       wwpLeosCfmServiceNumRemoteMEP 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.17 counter32 read-only
This MIB object shows the Number of Remote MEPs.
                       wwpLeosCfmServiceNumActiveMEP 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.18 counter32 read-only
This MIB object shows the Number of active MEPs.
                       wwpLeosCfmServiceStatus 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.19 rowstatus read-only
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this object to 'destroy'.
                       wwpLeosCfmServiceNextMepId 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.20 unsigned32 read-only
This mib object specifies the next MEP Id for given service.
                       wwpLeosCfmServiceAlarmPriority 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.21 unsigned32 read-write
This mib object specifies the alarm priority for given service.
                       wwpLeosCfmServiceNumCCMForFault 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.22 unsigned32 read-write
The number of CCM frames that must go undelivered for the service to be declared as operationally down.
                       wwpLeosCfmServiceDMMInterval 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.23 integer read-write
This MIB object allows to set the DMM transmission interval index for the service specified by wwpLeosCfmServiceType. This determines the frequency at which DMMs are transmitted. The length of the interval increases exponentially with the index value.
                       wwpLeosCfmServiceLMMInterval 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.24 integer read-write
This MIB object allows to set the LMM transmission interval index for the service specified by wwpLeosCfmServiceType. This determines the frequency at which LMMs are transmitted. The length of the interval increases exponentially with the index value.
                       wwpLeosCfmServiceCCMLossStatsState 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.25 integer read-write
This object specifies the operational state of CCM loss accounting for RMEPs learned by this service type. Enumeration: 'disabled': 1, 'enabled': 2.
                       wwpLeosCfmServiceCCMLossBucketInterval 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.26 integer read-write
This object specifies the interval in minutes that each of the 96 CCM loss history buckets spans. The default is 15 minutes, which means the default history covers 24 hours.
                       wwpLeosCfmServiceRemoteMepDiscovery 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.27 integer read-write
This object specifies whether remote meps should be discovered automatically. if this object is set to enable it will cause remote meps to be discovered automatically and if set to disable will not discover rempote meps. Enumeration: 'disabled': 1, 'enabled': 2.
                       wwpLeosCfmServiceY1731 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.28 truthvalue read-write
Specifies if y1731 is enabled for the service.
                       wwpLeosCfmServiceAccelerated 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.49 truthvalue read-only
Specifies if the service is supported in hardware .
                       wwpLeosCfmServiceTlvSenderIdType 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.50 integer read-only
This mib object specifies the Sender Id Tlv Type. Enumeration: 'manage': 3, 'none': 1, 'chassis': 2, 'chassisManage': 4.
                       wwpLeosCfmServiceRMEPHoldTime 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.51 unsigned32 read-only
This mib object specifies the Remote MEP hold time in milliseconds.
                       wwpLeosCfmServiceCCMTxState 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.52 integer read-only
This mib object specifies the admin state of the CCM Tx. Enumeration: 'disabled': 1, 'enabled': 2.
                       wwpLeosCfmServicePortStatusFlag 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.53 truthvalue read-only
This mib object shows the Port Status defect flag.
                       wwpLeosCfmServiceRDIFlag 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.54 truthvalue read-only
This mib object shows the RDI defect flag.
                       wwpLeosCfmServiceInstabilityFlag 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.55 truthvalue read-only
This mib object shows the Instability defect flag.
                       wwpLeosCfmServiceRMEPAging 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.56 truthvalue read-only
Controls automatic Remote MEP aging for the service.
                       wwpLeosCfmServiceDefaultMEPType 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.57 integer read-only
This object is used to specify the type of all MEP's created for the service. Services of type PBT must specify a MEP type of 'down'. Enumeration: 'down': 2, 'up': 1.
                       wwpLeosCfmServiceMAID 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.58 cfmmaid read-only
The MAID send by CCM's associated with the service.
                       wwpLeosCfmServiceMdIndex 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.59 unsigned32 read-write
The unique index in the Maint Domain table.
                       wwpLeosCfmServiceMaintAssocNameType 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.60 dot1agcfmmaintassocnametype read-write
The type (and thereby format) of the Maintenance Association Name.
                       wwpLeosCfmServiceMaintAssocName 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.61 dot1agcfmmaintassocname read-write
The Short Maintenance Association name. The type/format of this object is determined by the value of the dot1agCfmMaNetNameType object.
                       wwpLeosCfmServiceMulticastDa 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.65 truthvalue read-write
Specifies if multicast DA mode is enabled for the service.
                       wwpLeosCfmServiceChargedAgainstGlobalFrameBudget 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.71 truthvalue read-only
This MIB object reflects if this service is charged against the global frame budget.
                       wwpLeosCfmServiceCfmDefaultMEPType 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.72 integer read-only
This object is used to specify the type of all MEP's created for the service. Services of type PBT must specify a MEP type of 'down'. Enumeration: 'down': 2, 'up': 1.
                       wwpLeosCfmServiceCfmMAID 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.73 cfmmaid read-only
The MAID send by CCM's associated with the service.
                       wwpLeosCfmServiceCfmMdIndex 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.74 unsigned32 read-write
The unique index in the Maint Domain table.
                       wwpLeosCfmServiceCfmMaintAssocNameType 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.75 dot1agcfmmaintassocnametype read-write
The type (and thereby format) of the Maintenance Association Name.
                       wwpLeosCfmServiceCfmMaintAssocName 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.76 dot1agcfmmaintassocname read-write
The Short Maintenance Association name. The type/format of this object is determined by the value of the dot1agCfmMaNetNameType object.
                       wwpLeosCfmServiceCfmControlModuleFrameBudget 1.3.6.1.4.1.6141.2.60.35.1.2.1.1.77 counter32 read-only
Cfm Frame budget for control module for the given service.
               wwpLeosCfmServiceFaultTable 1.3.6.1.4.1.6141.2.60.35.1.2.2 no-access
The (conceptual) table used for Fault Traps. The last CFM error that occurred is reported.
                   wwpLeosCfmServiceFaultEntry 1.3.6.1.4.1.6141.2.60.35.1.2.2.1 no-access
An entry (conceptual row) in the wwpLeosCfmServiceFaultTable.
                       wwpLeosCfmServiceFaultTime 1.3.6.1.4.1.6141.2.60.35.1.2.2.1.1 timeticks read-only
This object is used to specify the Time at which the fault occurred.
                       wwpLeosCfmServiceFaultType 1.3.6.1.4.1.6141.2.60.35.1.2.2.1.2 integer read-only
This object is used to specify the type of fault. Enumeration: 'errorCCMDefect': 5, 'none': 1, 'xconCCMDefect': 6, 'someRMEPCCMDefect': 4, 'someRDIDefect': 2, 'someMACStatusDefect': 3, 'instability': 7.
                       wwpLeosCfmServiceFaultDesc 1.3.6.1.4.1.6141.2.60.35.1.2.2.1.3 displaystring read-only
This object is used to specify the description of the fault.
                       wwpLeosCfmServiceFaultMep 1.3.6.1.4.1.6141.2.60.35.1.2.2.1.4 integer read-only
This object is used to specify the Mepid of MEP reporting the fault.
                       wwpLeosCfmServiceVlan 1.3.6.1.4.1.6141.2.60.35.1.2.2.1.5 integer read-only
This object is used to specify the service VLAN.
                       wwpLeosCfmServiceVsPbtName 1.3.6.1.4.1.6141.2.60.35.1.2.2.1.50 displaystring read-only
This object represents the virtual switch or Pbt tunnel assigned to the given service.
               wwpLeosCfmServiceStatisticsTable 1.3.6.1.4.1.6141.2.60.35.1.2.3 no-access
The (conceptual) table listing the configuration parameters for the CFM Service Table. To create an entry in this table, the following criteria must be met: wwpLeosCfmServiceType must be specified. wwpLeosCfmServiceValue must be specified. wwpLeosCfmServiceName must be specified. wwpLeosCfmServiceStatus must be set to createAndGo.
                   wwpLeosCfmServiceStatisticsEntry 1.3.6.1.4.1.6141.2.60.35.1.2.3.1 no-access
An entry (conceptual row) in the wwpLeosCfmServiceTable.
                       wwpLeosCfmServiceRxTotalValidFrames 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.1 counter64 read-only
The total valid Frames received.
                       wwpLeosCfmServiceRxTotalInvalidFrames 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.2 counter64 read-only
The total invalid Frames received.
                       wwpLeosCfmServiceInvalidMessageOverflow 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.3 counter64 read-only
The total invalid message overflow Frames.
                       wwpLeosCfmServiceInvalidPortStatusTLV 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.4 counter64 read-only
The total invalid Port Status TLVs Frames.
                       wwpLeosCfmServiceInvalidInterfaceStatusTLV 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.5 counter64 read-only
The invalid interface Status TLVs Frames.
                       wwpLeosCfmServiceInvalidSenderIDTLV 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.6 counter64 read-only
The invalid SenderId TLV.
                       wwpLeosCfmServiceTxTotalCCM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.7 counter64 read-only
The total CCM sent.
                       wwpLeosCfmServiceTotalRxValidCCM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.8 counter64 read-only
The total valid CCM received.
                       wwpLeosCfmServiceTotalRxInSequenceCCM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.9 counter64 read-only
The total CCM in sequence received.
                       wwpLeosCfmServiceTotalRxNotInSequenceCCM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.10 counter64 read-only
The total CCM not in sequence received.
                       wwpLeosCfmServiceTotalRxMDLevelXconCCM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.11 counter64 read-only
The total MD Level Xcon CCM received.
                       wwpLeosCfmServiceTotalRxMAIDXconCCM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.12 counter64 read-only
The total MAID Xcon CCM received.
                       wwpLeosCfmServiceTotalRxMEPIDErrorCCM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.13 counter64 read-only
The total MEPID Error CCM received.
                       wwpLeosCfmServiceTotalRxCCMIntervalErrorCCM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.14 counter64 read-only
The total Interval Error CCM received.
                       wwpLeosCfmServiceTotalRxInvalidCCM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.15 counter64 read-only
The total Internal Error CCM received.
                       wwpLeosCfmServiceTotalTxLTM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.16 counter64 read-only
The total Internal Error CCM received.
                       wwpLeosCfmServiceTotalTxLTR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.17 counter64 read-only
The total Internal Error CCM received.
                       wwpLeosCfmServiceTotalRxValidLTR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.18 counter64 read-only
The valid LTR Received.
                       wwpLeosCfmServiceTotalRxUnexpectedLTR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.19 counter64 read-only
The unexpected LTR received.
                       wwpLeosCfmServiceTotalRxInvalidLTR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.20 counter64 read-only
This object specifies invalid LTR received.
                       wwpLeosCfmServiceTotalRxInvalidRelayActionLTR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.21 counter64 read-only
The total invalid relay action LTR received.
                       wwpLeosCfmServiceTotalRxValidLTM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.22 counter64 read-only
The valid LTM received.
                       wwpLeosCfmServiceTotalTxInvalidLTM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.23 counter64 read-only
The total invalid LTM sent.
                       wwpLeosCfmServiceTotalTxLBM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.24 counter64 read-only
The total LBM sent.
                       wwpLeosCfmServiceTotalTxLBR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.25 counter64 read-only
The total LBR sent.
                       wwpLeosCfmServiceTotalRxInorderLBR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.26 counter64 read-only
The total in order LBR received.
                       wwpLeosCfmServiceTotalRxOutOfOrderLBR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.27 counter64 read-only
The toal out of order LBR received.
                       wwpLeosCfmServiceTotalRxContentMismatchLBR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.28 counter64 read-only
The total content mismatch LBR received.
                       wwpLeosCfmServiceTotalRxUnexpectedLBR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.29 counter64 read-only
The total unexpected LBR received.
                       wwpLeosCfmServiceTotalRxInvalidLBR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.30 counter64 read-only
The invalid LBR received.
                       wwpLeosCfmServiceTotalRxValidLBM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.31 counter64 read-only
The valid LBM received.
                       wwpLeosCfmServiceTotalRxInvalidLBM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.32 counter64 read-only
The total invalid LBM received.
                       wwpLeosCfmServiceTotalTxDMM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.33 counter64 read-only
The total DMM sent.
                       wwpLeosCfmServiceTotalTxDMR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.34 counter64 read-only
The total DMR sent.
                       wwpLeosCfmServiceTotalRxDMM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.35 counter64 read-only
The total DMM received.
                       wwpLeosCfmServiceTotalRxDMR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.36 counter64 read-only
The total DMR received.
                       wwpLeosCfmServiceTotalTxLMM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.37 counter64 read-only
The total LMM sent.
                       wwpLeosCfmServiceTotalTxLMR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.38 counter64 read-only
The total LMR sent.
                       wwpLeosCfmServiceTotalRxLMM 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.39 counter64 read-only
The total LMM received.
                       wwpLeosCfmServiceTotalRxLMR 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.40 counter64 read-only
The total LMR received.
                       wwpLeosCfmServiceStatsClear 1.3.6.1.4.1.6141.2.60.35.1.2.3.1.41 integer read-write
Setting this object to clear will clear statististics for the given service index. This object can't be set to none Enumeration: 'clear': 1, 'none': 2.
               wwpLeosCfmServiceClearStats 1.3.6.1.4.1.6141.2.60.35.1.2.4 integer read-write
Setting this object to clear(1) will clear all service level statistics for all services in addition within each mep. Enumeration: 'clear': 1, 'none': 2.
           wwpLeosCfmMIP 1.3.6.1.4.1.6141.2.60.35.1.3
               wwpLeosCfmMipTable 1.3.6.1.4.1.6141.2.60.35.1.3.1 no-access
The (conceptual) table listing the configuration parameters for the CFM MIP Table. This table is not applicable if wwpLeosCfmServiceType is set to pbtTunnel. Any Get/Set/Walk will return error.
                   wwpLeosCfmMipEntry 1.3.6.1.4.1.6141.2.60.35.1.3.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmMipTable.
                       wwpLeosCfmMipVid 1.3.6.1.4.1.6141.2.60.35.1.3.1.1.1 integer read-only
This object is used as index in the table and is used to specify the VLAN service type for which intermediate maintenance points can be created.
                       wwpLeosCfmMipPort 1.3.6.1.4.1.6141.2.60.35.1.3.1.1.2 integer read-only
This object is used as index in the table and is used to specify the port.
                       wwpLeosCfmMipLevel 1.3.6.1.4.1.6141.2.60.35.1.3.1.1.3 integer read-only
This object is used to specify the level attribute.
                       wwpLeosCfmMipStatus 1.3.6.1.4.1.6141.2.60.35.1.3.1.1.4 rowstatus read-only
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set it to 'destroy'.
           wwpLeosCfmLinkTrace 1.3.6.1.4.1.6141.2.60.35.1.4
               wwpLeosCfmLinkTraceMsgTable 1.3.6.1.4.1.6141.2.60.35.1.4.1 no-access
The (conceptual) table listing the configuration parameters for the LinkTraceMsg. Not applicable to 6.x
                   wwpLeosCfmLinkTraceMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.4.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmLinkTraceMsgTable.
                       wwpLeosCfmLinkTraceMsgPortId 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.1 integer no-access
This object is used to specify the port.
                       wwpLeosCfmLinkTraceMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.2 integer read-only
This object is used to specify the target MEPID. This object should only be set if wwpLeosCfmLinkTraceMsgTargetMacAddr is not specified else error will be returned.
                       wwpLeosCfmLinkTraceMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.3 macaddress read-only
This object is used to specify the target MacAddress to be used when sending link LinkMsg. This object should only be set if wwpLeosCfmLinkTraceMsgTargetMEPID is not specified else error will be returned.
                       wwpLeosCfmLinkTraceMsgTTL 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.4 integer read-only
This object is used to specify the TTL to be used when sending link LinkTraceMsg.
                       wwpLeosCfmLinkTraceMsgSequenceNumber 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.5 integer32 read-only
This object is used to specify the sequence number in the linkTraceMsg.
                       wwpLeosCfmLinkTraceMsgRowStatus 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.6 rowstatus read-only
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'.
                       wwpLeosCfmLinkTraceMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.7 integer read-only
This object is used to specify the priority to be used when sending LinkTraceMsg.
                       wwpLeosCfmLinkTraceMsgServiceName 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.50 displaystring read-only
This object is used to specify the service to be used when sending LinkTraceMsg.
                       wwpLeosCfmLinkTraceMsgSubPortName 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.52 displaystring read-only
This object represents the sub-port name where the LinkTraceMsg was sent.
                       wwpLeosCfmLinkTraceMsgVsIndex 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.53 unsigned32 read-only
This object represents the virtual switch where the LinkTraceMsg was sent.
                       wwpLeosCfmLinkTraceMsgTotalTxLtm 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.54 unsigned32 read-only
This object represents the total LinkTraceMsg were sent.
                       wwpLeosCfmLinkTraceMsgTotalRxLtr 1.3.6.1.4.1.6141.2.60.35.1.4.1.1.55 unsigned32 read-only
This object represents the total LinkTraceMsg were received from the LinkTraceResponse.
               wwpLeosCfmLinkTraceMsgReplyTable 1.3.6.1.4.1.6141.2.60.35.1.4.2 no-access
The (conceptual) table listing the display parameters for the LinkTrace Msg Reply.
                   wwpLeosCfmLinkTraceMsgReplyEntry 1.3.6.1.4.1.6141.2.60.35.1.4.2.1 no-access
An entry (conceptual row) in the wwpLeosCfmLinkTraceMsgReplyTable.
                       wwpLeosCfmLinkTraceMsgReplyTTL 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.1 integer32 read-only
This object is used to specify the ttl of the received LinkTrace msg reply.
                       wwpLeosCfmLinkTraceMsgReplyTTLIndex 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.2 unsigned32 read-only
This object provides an additional index when multiple LinkTrace messages are received with the same TTL.
                       wwpLeosCfmLinkTraceMsgReplySequenceNumber 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.3 integer32 read-only
This object is used to specify the sequence number of the received LinkTrace msg reply.
                       wwpLeosCfmLinkTraceMsgReplyMPMacAddr 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.4 macaddress read-only
This object is used to specify the mac address of the MP of received LinkTrace msg reply.
                       wwpLeosCfmLinkTraceMsgReplyMEPID 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.5 integer32 read-only
This object is used to specify the MEP ID of the received LinkTrace msg reply.
                       wwpLeosCfmLinkTraceMsgReplyTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.6 macaddress read-only
This object is used to specify the Target Mac address of the received LinkTrace msg reply.
                       wwpLeosCfmLinkTraceMsgReplyRelayAction 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.7 integer read-only
This object is used to specify the message reply relay action. Enumeration: 'fdb': 3, 'hit': 6, 'mpdb': 4, 'unknown': 2, 'invalid': 1, 'noLearn': 5.
                       wwpLeosCfmLinkTraceMsgReplyIngressPort 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.8 integer read-only
This object is used to specify the message reply ingress port.
                       wwpLeosCfmLinkTraceMsgReplyIngressAction 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.9 integer read-only
This object is used to specify the message reply ingress action. Enumeration: 'down': 4, 'none': 5, 'ok': 1, 'vid': 3, 'blocked': 2.
                       wwpLeosCfmLinkTraceMsgReplyEgressPort 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.10 integer read-only
This object is used to specify the message reply egress port.
                       wwpLeosCfmLinkTraceMsgReplyEgressAction 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.11 integer read-only
This object is used to specify the message reply egress action. Enumeration: 'none': 1, 'ok': 6, 'vid': 5, 'down': 3, 'ttl': 2, 'blocked': 4.
                       wwpLeosCfmLinkTraceMsgReplyIngressPortStr 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.12 displaystring read-only
This mib object is used to specify the message reply ingress port.
                       wwpLeosCfmLinkTraceMsgReplyEgressPortStr 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.13 displaystring read-only
This mib object is used to specify the message reply egress port.
                       wwpLeosCfmLinkTraceMsgReplyIngressMacAddr 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.50 macaddress read-only
This object is used to specify the message reply ingress mac address.
                       wwpLeosCfmLinkTraceMsgReplyEgressMacAddr 1.3.6.1.4.1.6141.2.60.35.1.4.2.1.51 macaddress read-only
This object is used to specify the message reply egress mac address.
           wwpLeosCfmLoopback 1.3.6.1.4.1.6141.2.60.35.1.5
               wwpLeosCfmLoopbackMsgTable 1.3.6.1.4.1.6141.2.60.35.1.5.1 no-access
The (conceptual) table listing the configuration parameters for the LoopbackMsg.
                   wwpLeosCfmLoopbackMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.5.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmLoopbackMsgTable.
                       wwpLeosCfmLoopbackMsgPortId 1.3.6.1.4.1.6141.2.60.35.1.5.1.1.1 integer read-only
This object is used to specify the port.
                       wwpLeosCfmLoopbackMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.5.1.1.2 unsigned32 read-only
This object is used to specify the MEPID. This object should only be set if wwpLeosCfmLoopbackMsgTargetMacAddr is not specified else error will be returned.
                       wwpLeosCfmLoopbackMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.5.1.1.3 macaddress read-only
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosCfmLoopbackMsgTargetMEPID is not specified else error will be returned.
                       wwpLeosCfmLoopbackMsgCount 1.3.6.1.4.1.6141.2.60.35.1.5.1.1.4 integer read-only
This object is used to specify the LoopbackMsg count to be used when sending link LoopbackMsg.
                       wwpLeosCfmLoopbackMsgData 1.3.6.1.4.1.6141.2.60.35.1.5.1.1.5 displaystring read-only
This object is used to specify the LoopbackMsg data to be used when sending link LoopbackMsg.
                       wwpLeosCfmLoopbackMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.5.1.1.6 integer read-only
This object is used to specify the LoopbackMsg priority to be used when sending link LoopbackMsg.
                       wwpLeosCfmLoopbackMsgRowStatus 1.3.6.1.4.1.6141.2.60.35.1.5.1.1.7 rowstatus read-only
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'.
                       wwpLeosCfmLoopbackMsgDefaultInterval 1.3.6.1.4.1.6141.2.60.35.1.5.1.1.8 integer read-only
The global default LoopbackMsg interval to be used when sending link LoopbackMsg
                       wwpLeosCfmLoopbackMsgDefaultTimeout 1.3.6.1.4.1.6141.2.60.35.1.5.1.1.9 integer read-only
The global default LoopbackMsg timeout to be used when sending link LoopbackMsg
           wwpLeosCfmMaintenance 1.3.6.1.4.1.6141.2.60.35.1.6
               wwpLeosCfmMaintenanceDomainTable 1.3.6.1.4.1.6141.2.60.35.1.6.1 no-access
The (conceptual) table listing the configuration parameters for the CFM Maintenance Domain Table.
                   wwpLeosCfmMaintenanceDomainEntry 1.3.6.1.4.1.6141.2.60.35.1.6.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmMaintenanceDomainTable.
                       wwpLeosCfmMaintenanceDomainIndex 1.3.6.1.4.1.6141.2.60.35.1.6.1.1.1 unsigned32 read-only
This object specfies the unique index in the table.
                       wwpLeosCfmMaintenanceDomainLevel 1.3.6.1.4.1.6141.2.60.35.1.6.1.1.2 integer read-write
This object specfies the domain level.
                       wwpLeosCfmMaintenanceDomainName 1.3.6.1.4.1.6141.2.60.35.1.6.1.1.3 displaystring read-write
The domain name which can be modified.
                       wwpLeosCfmMaintenanceDomainServiceCount 1.3.6.1.4.1.6141.2.60.35.1.6.1.1.4 unsigned32 read-only
This object specfies number of cfm services mapped to this domain.
                       wwpLeosCfmMaintenanceDomainMdFormat 1.3.6.1.4.1.6141.2.60.35.1.6.1.1.5 dot1agcfmmaintdomainnametype read-write
The type (and thereby format) of the Maintenance Domain Name.
                       wwpLeosCfmMaintenanceDomainMdName 1.3.6.1.4.1.6141.2.60.35.1.6.1.1.6 dot1agcfmmaintdomainname read-write
The Maintenance Domain name. The type/format of this object is determined by the value of the wwpLeosCfmMaintenanceDomainMdFormat object.
                       wwpLeosCfmMaintenanceDomainStatus 1.3.6.1.4.1.6141.2.60.35.1.6.1.1.7 rowstatus read-only
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo' and specify, at a minimum, the wwpLeosCfmMaintenanceDomainLevel and wwpLeosCfmMaintenanceDomainName objects. During a create/set operation, if a non-default MdFormat is required, both the wwpLeosCfmMaintenanceDomainMdFormat and wwpLeosCfmMaintenanceDomainMdName objects must also be specified. To delete a row in this table, set this object to 'destroy'.
           wwpLeosCfmMEP 1.3.6.1.4.1.6141.2.60.35.1.7
               wwpLeosCfmMEPTable 1.3.6.1.4.1.6141.2.60.35.1.7.1 no-access
The (conceptual) table listing the configuration parameters for the CFM MEP table.
                   wwpLeosCfmMEPEntry 1.3.6.1.4.1.6141.2.60.35.1.7.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmMEPTable.
                       wwpLeosCfmMEPPort 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.1 integer read-only
This object is used as index in the table and is used to specify the port id.
                       wwpLeosCfmMEPAdminState 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.2 integer read-write
This object is used to specify the admin state of CFM MEP. Enumeration: 'disabled': 1, 'enabled': 2.
                       wwpLeosCfmMEPOperState 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.3 integer read-only
This object is obsolete and should not be used. Enumeration: 'disabled': 1, 'enabled': 2.
                       wwpLeosCfmMEPDirection 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.4 integer read-only
This object is used to specify the MEP direction of the service. This object can only be set if wwpLeosCfmServiceIndex is of type vlan. Enumeration: 'down': 2, 'up': 1.
                       wwpLeosCfmMEPCCMState 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.5 integer read-write
This object specifies the CCM transmission for the service specified by wwpLeosCfmServiceType. Enumeration: 'on': 1, 'off': 2.
                       wwpLeosCfmMEPCCMPriority 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.6 integer read-write
This object specified the priority of CCM messages transmitted.
                       wwpLeosCfmMEPLTMPriority 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.7 integer read-write
This object specifies the priority received on the given service and port.
                       wwpLeosCfmMEPId 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.8 unsigned32 read-only
This object specifies the mep id for the given service and port.
                       wwpLeosCfmMEPMacAddr 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.9 macaddress read-only
This object specifies the mac address received on the given service and port..
                       wwpLeosCfmMEPNextLbmSeqNumber 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.10 counter32 read-only
This object specifies the next lbm sequence number received on the given service and port.
                       wwpLeosCfmMEPRxValidInOrderLoopbackReply 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.11 counter32 read-only
The total valid in order loopback replies received on the given service and port.
                       wwpLeosCfmMEPRxValidOutOrderLoopbackReply 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.12 counter32 read-only
This object specifies the total valid out of order loopback replies received on the given service and port.
                       wwpLeosCfmMEPNextLTMSeqNumber 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.13 counter32 read-only
This object specifies the next LTM serquence number received on the given service and port.
                       wwpLeosCfmMEPNumLoopbackRepliesTxmt 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.14 counter32 read-only
This object specifies the flags total loopback replies transmitted on the given service and port.
                       wwpLeosCfmMEPNumLTMReceived 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.15 counter32 read-only
This object specifies the total LTM messages received on the given service and port.
                       wwpLeosCfmMEPNumLTMTxmt 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.16 counter32 read-only
The total LTM transmitted on the given service and port.
                       wwpLeosCfmMEPNumCCMTxmt 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.17 counter32 read-only
This object specifies the total CCM messages transmitted on the given service and port.
                       wwpLeosCfmMEPRowStatus 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.18 rowstatus read-only
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'.
                       wwpLeosCfmMEPNumDMMSent 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.19 counter32 read-only
This object specifies the total delay measurement messages transmitted on the given service and port.
                       wwpLeosCfmMEPDMMDelay 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.20 counter32 read-only
This object specifies the average delay in microseconds measured during the last DMM performance test on the given service and port.
                       wwpLeosCfmMEPDMMJitter 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.21 counter32 read-only
This object specifies the average jitter in microseconds measured during the last DMM performance test on the given service and port.
                       wwpLeosCfmMEPNumLMMSent 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.22 counter32 read-only
The total frame loss measurement messages transmitted during the last test performed on the given service and port.
                       wwpLeosCfmMEPLMMFrameLossNear 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.23 counter32 read-only
This object specifies the number of lost frames on the near side measured during the last LMM performance test on the given service and port.
                       wwpLeosCfmMEPLMMFrameLossFar 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.24 counter32 read-only
This object specifies the number of lost frames on the far side measured during the last LMM performance test on the given service and port.
                       wwpLeosCfmMEPNumLMRReceived 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.25 counter32 read-only
This object specifies the total number of frame loss measurement replies received during the last test performed on the given service and port. If this count is zero, the near and far frame loss counts are probably invalid as connectivity to the device being tested was not available.
                       wwpLeosCfmMEPNumDMRReceived 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.26 counter32 read-only
This object specifies the total number of delay measurement replies received during the last test performed on the given service and port. If this count is not equal to the number of delay measurement frames sent, the jitter and delay are probably invalid as connectivity to the device being tested was not stable.
                       wwpLeosCfmMEPDMMMinDelay 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.27 counter32 read-only
The minimum delay in microseconds measured during the last DMM performance test on the given service and port.
                       wwpLeosCfmMEPDMMMaxDelay 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.28 counter32 read-only
The maximum delay in microseconds measured during the last DMM performance test on the given service and port.
                       wwpLeosCfmMEPDMMMinJitter 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.29 counter32 read-only
The minimum jitter in microseconds measured during the last DMM performance test on the given service and port.
                       wwpLeosCfmMEPDMMMaxJitter 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.30 counter32 read-only
The maximum jitter in microseconds measured during the last DMM performance test on the given service and port.
                       wwpLeosCfmMEPServiceName 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.50 displaystring read-only
This object is used to specify the service name assigned to this port.
                       wwpLeosCfmMEPSubPortName 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.51 displaystring read-only
This object represents the sub-port name assigned to the given service and port.
                       wwpLeosCfmMEPVsPbtName 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.52 displaystring read-only
This object represents the virtual switch or Pbt tunnel assigned to the given service and port.
                       wwpLeosCfmMEPLogicalPortName 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.53 displaystring read-only
This object represents the logical port name assigned to the given service and port.
                       wwpLeosCfmMEPSubPortIndex 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.54 unsigned32 read-only
This object is used to specify the CFM sub-port index.
                       wwpLeosCfmMEPEncapsulation 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.55 integer read-only
This object is used to specify the encapsulation applied to the service and port. Enumeration: 'ieee802dot1d': 1, 'pbtCfmEncap': 2.
                       wwpLeosCfmMEPLeadPortBayIndex 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.56 unsigned32 read-only
This object is used as to specify the agent bay that MEP is in.
                       wwpLeosCfmMEPLeadPortShelfIndex 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.57 unsigned32 read-only
This object is used as to specify the agent shelf that MEP is in.
                       wwpLeosCfmMEPLeadPortModuleIndex 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.58 unsigned32 read-only
This object is used as to specify the agent module that MEP is in. Index = 255 is reserved for Lag ports and this this object cannot be set to 255 in this table.
                       wwpLeosCfmMEPPBTBvid 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.59 unsigned32 read-only
This object specifies the BVID assigned to the given service and port.
                       wwpLeosCfmMEPPBTEtype 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.60 unsigned32 read-only
This object specifies the E-type assigned to the given service and port.
                       wwpLeosCfmMEPNumLbmTxmt 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.61 counter32 read-only
This object specifies the total loopback messages transmitted on the given service and port.
                       wwpLeosCfmMEPNumLbmReceived 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.62 counter32 read-only
This object specifies the total loopback messages received on the given service and port.
                       wwpLeosCfmMEPNumLoopbackRepliesReceived 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.63 counter32 read-only
This object specifies the total loopback replies received on the given service and port.
                       wwpLeosCfmMEPNumLTRepliesTxmt 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.64 counter32 read-only
This object specifies the total link trace replies transmitted on the given service and port.
                       wwpLeosCfmMEPNumLTRepliesReceived 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.65 counter32 read-only
This object specifies the total link trace replies received on the given service and port.
                       wwpLeosCfmMEPNumUnexpectedLTRepliesReceived 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.66 counter32 read-only
This object specifies the total unexpected link trace replies received on the given service and port.
                       wwpLeosCfmMEPNumCCMReceived 1.3.6.1.4.1.6141.2.60.35.1.7.1.1.67 counter32 read-only
This object specifies the total CCM messages received on the given service and port.
           wwpLeosCfmRemoteMEP 1.3.6.1.4.1.6141.2.60.35.1.8
               wwpLeosCfmRemoteMEPTable 1.3.6.1.4.1.6141.2.60.35.1.8.1 no-access
The (conceptual) table listing the display parameters for the Remote MEP table.
                   wwpLeosCfmRemoteMEPEntry 1.3.6.1.4.1.6141.2.60.35.1.8.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmRemoteMEPTable.
                       wwpLeosCfmRemoteMEPID 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.1 unsigned32 read-only
This object is used as index in the table and is used to specify the MEPID.
                       wwpLeosCfmRemoteMEPAdminState 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.2 integer read-write
The administrative state of the Remote MEP State Machine. Enumeration: 'disabled': 1, 'enabled': 2.
                       wwpLeosCfmRemoteMEPOperState 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.3 integer read-only
The operational state of the Remote MEP State Machine. disabled represents that remote mep is admin disabled. enabled represents that remote mep is operationally enabled hold represents that remote mep is admin enabled but currently in operational hold state holdLocked represents that remote mep is locked in hold state. Enumeration: 'disabled': 1, 'hold': 3, 'enabled': 2, 'holdLocked': 4.
                       wwpLeosCfmRemoteMEPTime 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.4 timeticks read-only
This object is used to specify the time at which the Remote MEP State Machine last entered RMEP_FAILED or RMEP_OK states.
                       wwpLeosCfmRemoteMEPMacAddr 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.5 macaddress read-only
This object is used to specify the MAC address of the remote MEP.
                       wwpLeosCfmRemoteMEPKLastMacStatus 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.6 truthvalue read-only
This object is used to specify the last MAC status received.
                       wwpLeosCfmRemoteMEPFailureFlag 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.7 truthvalue read-only
This object is used to specify the Remote MEP failure flag.
                       wwpLeosCfmRemoteMEPCCMErrorFlag 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.8 truthvalue read-only
This object is used to specify the MEP CCM error flag.
                       wwpLeosCfmRemoteMEPRDIErrorFlag 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.9 truthvalue read-only
This object is used to specify the MEP RDI error flag.
                       wwpLeosCfmRemoteMEPNumCCMRx 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.10 counter32 read-only
This object is used to show the number of MEP CCM frames received.
                       wwpLeosCfmRemoteMEPNumDMMSent 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.11 counter32 read-only
The number of DMM frames sent.
                       wwpLeosCfmRemoteMEPDelay 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.12 counter32 read-only
This object is used to show the average Delay in microseconds during the last Delay Measurement test.
                       wwpLeosCfmRemoteMEPJitter 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.13 counter32 read-only
This object is used to show the average Jitter in microseconds during the last Delay Measurement test.
                       wwpLeosCfmRemoteMEPNumLMMSent 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.14 counter32 read-only
This object is used to show the number of LMM frames sent.
                       wwpLeosCfmRemoteMEPFrameLossNear 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.15 counter32 read-only
This object is used to show the near side Frame Loss during the last Frame Loss Measurement test.
                       wwpLeosCfmRemoteMEPFrameLossFar 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.16 counter32 read-only
This object is used to show the far side Frame Loss during the last Frame Loss Measurement test.
                       wwpLeosCfmRemoteMEPNumLMRReceived 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.17 counter32 read-only
This object is used to show the number of LMR frames received.
                       wwpLeosCfmRemoteMEPNumCCMLost 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.18 counter32 read-only
This object is used to show the number of MEP CCM frames lost, as calculated by watching for CCM sequence errors.
                       wwpLeosCfmRemoteMEPNumDMRReceived 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.19 counter32 read-only
This object is used to show the number of DMR frames received.
                       wwpLeosCfmRemoteMEPHoldState 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.20 integer read-only
This object is used to set the remote MEP Hold State Enumeration: 'disabled': 1, 'locked': 3, 'enabled': 2.
                       wwpLeosCfmRemoteMEPRowStatus 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.21 rowstatus read-only
This object is used to create entries in remote mep table
                       wwpLeosCfmRemoteMEPCCMComment 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.22 displaystring read-only
This mib object contains the CCM Comment, if available, that was sent by the remote Ciena device.
                       wwpLeosCfmRemoteMEPBadSequence 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.23 counter32 read-only
This mib object contains the number of LMR frames received with bad sequence number, for a given service and remote mep.
                       wwpLeosCfmRemoteMEPMinDelay 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.24 counter32 read-only
The minimum Delay in microseconds during the last Delay Measurement test.
                       wwpLeosCfmRemoteMEPMaxDelay 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.25 counter32 read-only
The maximum Delay in microseconds during the last Delay Measurement test.
                       wwpLeosCfmRemoteMEPMinJitter 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.26 counter32 read-only
The minimum jitter in microseconds during the last Delay Measurement test.
                       wwpLeosCfmRemoteMEPMaxJitter 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.27 counter32 read-only
The maximum jitter in microseconds during the last Delay Measurement test.
                       wwpLeosCfmRemoteCfmMEPHoldState 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.28 integer read-only
Hold-state for the remote-mep entry. Enumeration: 'lock': 3, 'enable': 2, 'disable': 1.
                       wwpLeosCfmRemoteMEPServiceClear 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.29 truthvalue read-only
Setting this object to true causes the remote MEP for this service to be re-initialized .
                       wwpLeosCfmRemoteMEPServiceStatisticsClear 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.30 truthvalue read-only
Setting this object to true resets the statistics for the remote MEP for this service.
                       wwpLeosCfmRemoteMEPAccelerated 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.49 truthvalue read-only
Specifies if the remote-mep is monitored in the hardware.
                       wwpLeosCfmRemoteMEPSubPortName 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.50 displaystring read-only
The object indicates the unique index for the module.
                       wwpLeosCfmRemoteMEPServiceName 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.51 displaystring read-only
This object is used to specify the Service name.
                       wwpLeosCfmRemoteMEPBayIndex 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.52 unsigned32 read-only
This object is used as to specify the agent bay that MEP is in.
                       wwpLeosCfmRemoteMEPShelfIndex 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.53 unsigned32 read-only
This object is used as to specify the agent shelf that MEP is in.
                       wwpLeosCfmRemoteMEPModuleIndex 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.54 unsigned32 read-only
This object is used as to specify the agent module that MEP is in. Index = 255 is reserved for Lag ports and this this object cannot be set to 255 in this table.
                       wwpLeosCfmRemoteMEPPreviousBayIndex 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.55 unsigned32 read-only
This object is used as to specify the agent bay that MEP was previously in.
                       wwpLeosCfmRemoteMEPPreviousShelfIndex 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.56 unsigned32 read-only
This object is used as to specify the agent shelf that MEP was previously in.
                       wwpLeosCfmRemoteMEPPreviousModuleIndex 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.57 unsigned32 read-only
This object is used as to specify the agent module that MEP was previously in. Index = 255 is reserved for Lag ports and this this object cannot be set to 255 in this table.
                       wwpLeosCfmRemoteMEPLastPortStatus 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.58 integer read-only
This object is used as to specify the remote MEP last port status. Enumeration: 'unknown': 1, 'none': 2, 'up': 4, 'blocked': 3.
                       wwpLeosCfmRemoteMEPLastInterfaceStatus 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.59 integer read-only
This object is used as to specify the remote MEP interface status. Enumeration: 'dormant': 5, 'none': 1, 'lowerLayerDown': 6, 'testing': 4, 'up': 2, 'down': 3, 'notPresent': 7.
                       wwpLeosCfmRemoteMEPLastSeqNum 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.60 unsigned32 read-only
This object is used to show the tbd.
                       wwpLeosCfmRemoteMEPCCMSeqErrors 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.61 unsigned32 read-only
This object is used to show the number of MEP CCM frames sequence errors.
                       wwpLeosCfmRemoteMEPCCMLevel 1.3.6.1.4.1.6141.2.60.35.1.8.1.1.62 integer read-only
This object is used as to specify the CCM level.
               wwpLeosCfmRemoteMEPDeleteAll 1.3.6.1.4.1.6141.2.60.35.1.8.65 truthvalue read-write
Setting this object to true will delete all remote meps. This object will always return false.
           wwpLeosCfmStack 1.3.6.1.4.1.6141.2.60.35.1.9
               wwpLeosCfmPortStackTable 1.3.6.1.4.1.6141.2.60.35.1.9.1 no-access
The (conceptual) table listing the display parameters for the CFM port stack table.
                   wwpLeosCfmPortStackEntry 1.3.6.1.4.1.6141.2.60.35.1.9.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmPortStackTable.
                       wwpLeosCfmPortStackPort 1.3.6.1.4.1.6141.2.60.35.1.9.1.1.1 integer read-only
This object is used as index in the table and is used to specify the port id.
                       wwpLeosCfmPortStackVid 1.3.6.1.4.1.6141.2.60.35.1.9.1.1.2 integer read-only
This object is used as index in the table and is used to show the VLAN.
                       wwpLeosCfmPortStackType 1.3.6.1.4.1.6141.2.60.35.1.9.1.1.3 integer read-only
This object is used as index in the table and is used to show the type of Maintenance Point. Enumeration: 'mepUp': 1, 'mepDown': 2, 'mip': 3.
                       wwpLeosCfmPortStackLevel 1.3.6.1.4.1.6141.2.60.35.1.9.1.1.4 unsigned32 read-only
This object is used as index in the table and is used to show the level of stack.
                       wwpLeosCfmPortStackMEPId 1.3.6.1.4.1.6141.2.60.35.1.9.1.1.5 integer read-only
The MEP ID.
           wwpLeosCfmMipCCMDb 1.3.6.1.4.1.6141.2.60.35.1.10
                 wwpLeosCfmMipCCMDbTable 1.3.6.1.4.1.6141.2.60.35.1.10.1 no-access
The (conceptual) table listing the display parameters for the MIP CCM Db table.
                     wwpLeosCfmMipCCMDbEntry 1.3.6.1.4.1.6141.2.60.35.1.10.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmMipCCMDbTable.
                         wwpLeosCfmMipCCMDbIndex 1.3.6.1.4.1.6141.2.60.35.1.10.1.1.1 unsigned32 read-only
This object shows the CCM DB vlan.
                         wwpLeosCfmMipCCMDbVid 1.3.6.1.4.1.6141.2.60.35.1.10.1.1.2 unsigned32 read-only
This object shows the CCM DB vlan.
                         wwpLeosCfmMipCCMDbMacAddr 1.3.6.1.4.1.6141.2.60.35.1.10.1.1.3 macaddress read-only
This object shows the mac address.
                         wwpLeosCfmMipCCMDbPort 1.3.6.1.4.1.6141.2.60.35.1.10.1.1.4 integer read-only
This object shows the CCM DB port.
                         wwpLeosCfmMipCCMDbMEPID 1.3.6.1.4.1.6141.2.60.35.1.10.1.1.5 integer read-only
This object shows the CCM DB MEP ID.
                         wwpLeosCfmMipCCMdbNumCCMRx 1.3.6.1.4.1.6141.2.60.35.1.10.1.1.6 counter32 read-only
This object shows the number of CCM DB packets received.
                         wwpLeosCfmMipCCMDbTime 1.3.6.1.4.1.6141.2.60.35.1.10.1.1.7 timeticks read-only
This object shows the CCM DB time.
                         wwpLeosCfmMipCCMDbLastMacStatus 1.3.6.1.4.1.6141.2.60.35.1.10.1.1.8 truthvalue read-only
This object shows the CCM DB last mac status.
                         wwpLeosCfmMipCCMDbRDIErrorFlag 1.3.6.1.4.1.6141.2.60.35.1.10.1.1.9 truthvalue read-only
This object shows the CCM DB RDI error flag status.
           wwpLeosCfmFaultNotif 1.3.6.1.4.1.6141.2.60.35.1.11
                 wwpLeosCfmFaultTrapState 1.3.6.1.4.1.6141.2.60.35.1.11.1 integer read-write
Setting this object to 'disabled' will cause CFM fault traps to be suppressed. Enumeration: 'disabled': 1, 'enabled': 2.
           wwpLeosCfmDelay 1.3.6.1.4.1.6141.2.60.35.1.12
                 wwpLeosCfmDelayMsgTable 1.3.6.1.4.1.6141.2.60.35.1.12.1 no-access
The (conceptual) table listing the configuration parameters for the DelayMeasurementMsg.
                     wwpLeosCfmDelayMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.12.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmDelayMsgTable.
                         wwpLeosCfmDelayMsgPortId 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.1 integer read-only
This object is used to specify the port.
                         wwpLeosCfmDelayMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.2 unsigned32 read-only
This object is used to specify the MEPID. This object should only be set if wwpLeosCfmDelayMsgTargetMacAddr is not specified else error will be returned.
                         wwpLeosCfmDelayMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.3 macaddress read-only
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosCfmDelayMsgTargetMEPID is not specified else error will be returned.
                         wwpLeosCfmDelayMsgCount 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.4 integer read-only
This object is used to specify the DelayMeasurementMsg count to be used when sending link DelayMeasurementMsg.
                         wwpLeosCfmDelayMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.5 integer read-only
This object is used to specify the DelayMeasurementMsg priority to be used when sending link DelayMeasurementMsg.
                         wwpLeosCfmDelayMsgRowStatus 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.6 rowstatus read-only
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'. If 'destroy' is used and either TargetMacAddr or TargetMEPID is specified, a cancel will be done for any repeating test on those items.
                         wwpLeosCfmDelayMsgRepeat 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.7 integer read-only
Used to make the Delay Measurement test a repeating test. Enumeration: 'enable': 1, 'disable': 2.
                         wwpLeosCfmDelayMsgRepeatCount 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.8 integer read-only
The repeat time in minutes for the Delay Measurement test. If zero is specified, the test runs continuously.
                         wwpLeosCfmDelayMsgDelayThreshold 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.9 integer read-only
The fault threshold for the Delay Measurement test, specified in microseconds. A value of -1 disables the generate of faults, 0 or greater will be compared to the average delay result of the test and a fault will be generated if the threshold is exceeded.
                         wwpLeosCfmDelayMsgJitterThreshold 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.10 integer read-only
The fault threshold for the Jitter Measurement test, specified in microseconds. A value of -1 disables the generate of faults, 0 or greater will be compared to the average jitter result of the test and a fault will be generated if the threshold is exceeded.
                         wwpLeosCfmDelayMsgMaxDelayThreshold 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.11 integer read-only
The fault threshold for the Delay Measurement test, specified in microseconds. A value of -1 disables the generate of faults, 0 or greater will be compared to the maximum delay result of the test and a fault will be generated if the threshold is exceeded.
                         wwpLeosCfmDelayMsgMaxJitterThreshold 1.3.6.1.4.1.6141.2.60.35.1.12.1.1.12 integer read-only
The fault threshold for the Jitter Measurement test, specified in microseconds. A value of -1 disables the generate of faults, 0 or greater will be compared to the maximum jitter result of the test and a fault will be generated if the threshold is exceeded.
           wwpLeosCfmFrameLoss 1.3.6.1.4.1.6141.2.60.35.1.13
                 wwpLeosCfmFrameLossMsgTable 1.3.6.1.4.1.6141.2.60.35.1.13.1 no-access
The (conceptual) table listing the configuration parameters for the FrameLossMeasurementMsg.
                     wwpLeosCfmFrameLossMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.13.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmFrameLossMsgTable.
                         wwpLeosCfmFrameLossMsgPortId 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.1 integer read-only
This object is used to specify the port.
                         wwpLeosCfmFrameLossMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.2 unsigned32 read-only
This object is used to specify the MEPID. This object should only be set if wwpLeosCfmFrameLossMsgTargetMacAddr is not specified else error will be returned.
                         wwpLeosCfmFrameLossMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.3 macaddress read-only
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosCfmFrameLossMsgTargetMEPID is not specified else error will be returned.
                         wwpLeosCfmFrameLossMsgCount 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.4 integer read-only
This object is used to specify the FrameLossMeasurementMsg count to be used when sending link FrameLossMeasurementMsg.
                         wwpLeosCfmFrameLossMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.5 integer read-only
This object is used to specify the FrameLossMeasurementMsg priority to be used when sending link FrameLossMeasurementMsg.
                         wwpLeosCfmFrameLossMsgRowStatus 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.6 rowstatus read-only
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'. If 'destroy' is used and either TargetMacAddr or TargetMEPID is specified, a cancel will be done for any repeating test on those items.
                         wwpLeosCfmFrameLossMsgRepeat 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.7 integer read-only
Used to make the Frame Loss Measurement test a repeating test. Enumeration: 'enable': 1, 'disable': 2.
                         wwpLeosCfmFrameLossMsgRepeatCount 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.8 integer read-only
The repeat time in minutes for the Frame Loss Measurement test. If zero is specified, the test runs continuously.
                         wwpLeosCfmFrameLossMsgFlnThreshold 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.9 integer read-only
The fault threshold for the Frame Loss Measurement test. A value of -1 disables the generate of faults, 0 or greater will be compared to the frame loss near result of the test and a fault will be generated if the threshold is exceeded.
                         wwpLeosCfmFrameLossMsgFlfThreshold 1.3.6.1.4.1.6141.2.60.35.1.13.1.1.10 integer read-only
The fault threshold for the Frame Loss Measurement test. A value of -1 disables the generate of faults, 0 or greater will be compared to the frame loss far result of the test and a fault will be generated if the threshold is exceeded.
           wwpLeosCfmRemoteMEPCCMLoss 1.3.6.1.4.1.6141.2.60.35.1.14
                 wwpLeosCfmRemoteMEPCCMLossTable 1.3.6.1.4.1.6141.2.60.35.1.14.1 no-access
The (conceptual) table listing the display parameters for the Remote MEP CCM Loss table.
                     wwpLeosCfmRemoteMEPCCMLossEntry 1.3.6.1.4.1.6141.2.60.35.1.14.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmRemoteMEPCCMLossTable.
                         wwpLeosCfmRemoteMEPCCMLossNum 1.3.6.1.4.1.6141.2.60.35.1.14.1.1.1 unsigned32 no-access
This object is used as an index into the table and is used to specify the CCM Loss bucket to be returned.
                         wwpLeosCfmRemoteMEPCCMLossCount 1.3.6.1.4.1.6141.2.60.35.1.14.1.1.2 gauge32 read-only
Count of the number of CCM's lost during the wwpLeosCfmServiceCCMLossBucketInterval sample period.
           wwpLeosCfmExtStack 1.3.6.1.4.1.6141.2.60.35.1.15
                 wwpLeosCfmExtPortStackTable 1.3.6.1.4.1.6141.2.60.35.1.15.1 no-access
The (conceptual) table listing the display parameters for the CFM port stack table.
                     wwpLeosCfmExtPortStackEntry 1.3.6.1.4.1.6141.2.60.35.1.15.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmPortStackTable.
                         wwpLeosCfmExtPortStackVid 1.3.6.1.4.1.6141.2.60.35.1.15.1.1.1 integer read-only
This object is used as index in the table and is used to show the VLAN.
                         wwpLeosCfmExtPortStackPort 1.3.6.1.4.1.6141.2.60.35.1.15.1.1.2 integer read-only
This object is used as index in the table and is used to specify the port id.
                         wwpLeosCfmExtPortStackType 1.3.6.1.4.1.6141.2.60.35.1.15.1.1.3 integer read-only
This object is used as index in the table and is used to show the type of Maintenance Point. Enumeration: 'mepUp': 1, 'mepDown': 2, 'mip': 3.
                         wwpLeosCfmExtPortStackLevel 1.3.6.1.4.1.6141.2.60.35.1.15.1.1.4 unsigned32 read-only
This object is used as index in the table and is used to show the level of stack.
                         wwpLeosCfmExtPortStackMEPId 1.3.6.1.4.1.6141.2.60.35.1.15.1.1.5 integer read-only
The MEP ID.
           wwpLeosCfmServiceFrameBudget 1.3.6.1.4.1.6141.2.60.35.1.16
                 wwpLeosCfmServiceFrameBudgetTable 1.3.6.1.4.1.6141.2.60.35.1.16.1 no-access
The (conceptual) table listing the config parameters for the CFM service frame budget table.
                     wwpLeosCfmServiceFrameBudgetEntry 1.3.6.1.4.1.6141.2.60.35.1.16.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmServiceFrameBudgetTable.
                         wwpLeosCfmSlotIndex 1.3.6.1.4.1.6141.2.60.35.1.16.1.1.1 integer no-access
This object identifies the slot number.
                         wwpLeosCfmServiceFrameBudgetSlot 1.3.6.1.4.1.6141.2.60.35.1.16.1.1.2 counter32 read-only
This object specifies the CFM frame budget for the slot for the given service.
           wwpLeosTceCfmMIBObj 1.3.6.1.4.1.6141.2.60.35.1.20
                 wwpLeosTceCfmMIP 1.3.6.1.4.1.6141.2.60.35.1.20.1
                     wwpLeosTceCfmMipTable 1.3.6.1.4.1.6141.2.60.35.1.20.1.1 no-access
The (conceptual) table listing the config parameters for the CFM MIP Table. This table is not applicable if wwpLeosTceCfmServiceType is set to pbtTunnel. Any Get/Set/Walk will return error. Not applicable to 6.x
                         wwpLeosTceCfmMipEntry 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1 no-access
An entry (conceptual row) in the wwpLeosTceCfmMipTable.
                             wwpLeosTceCfmMipLiType 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.1 integer no-access
This object specifies an unique index into the table. Enumeration: 'none': 99, 'mplsStaticPeSpokeVC': 5, 'mplsStaticMtuSpokeVC': 7, 'pbtService': 2, 'subPort': 1, 'mplsDynamicPeSpokeVC': 6, 'mplsDynamicPeMeshVC': 4, 'mplsDynamicMtuSpokeVC': 8, 'mplsStaticPeMeshVC': 3.
                             wwpLeosTceCfmMipLiIndex 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.2 integer no-access
This object specifies an unique index into the table.
                             wwpLeosTceCfmMipPgid 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.3 unsigned32 read-only
This object is used to specify the port group id.
                             wwpLeosTceCfmMipBayIndex 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.4 unsigned32 read-only
This object is used to specify the chassis bay.
                             wwpLeosTceCfmMipShelfIndex 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.5 unsigned32 read-only
This object is used to specify the chassis shelf.
                             wwpLeosTceCfmMipModuleIndex 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.6 unsigned32 read-only
This object is used to specify the chassis module.
                             wwpLeosTceCfmMipMacAddr 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.7 macaddress read-only
This object is used to specify the Mac Address.
                             wwpLeosTceCfmMipLevel 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.8 integer read-only
This object is used to specify the level attribute.
                             wwpLeosTceCfmMipStatus 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.9 rowstatus read-only
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set it to 'destroy'.
                             wwpLeosTceCfmMipLiName 1.3.6.1.4.1.6141.2.60.35.1.20.1.1.1.10 displaystring read-only
Logical interface name associated with the Mip.
                 wwpLeosTceCfmLoopback 1.3.6.1.4.1.6141.2.60.35.1.20.3
                     wwpLeosTceCfmLoopbackMsgTable 1.3.6.1.4.1.6141.2.60.35.1.20.3.1 no-access
The (conceptual) table listing the config parameters for the LoopbackMsg. The following attributes are required to create a LoopbackMsg: -- wwpLeosCfmServiceIndex -- wwpLeosTceCfmLoopbackMsgSubPortIndex -- wwpLeosTceCfmLoopbackMsgTargetMEPID or -- wwpLeosTceCfmLoopbackMsgTargetMacAddr -- wwpLeosTceCfmLoopbackMsgCount -- wwpLeosTceCfmLoopbackMsgData -- wwpLeosTceCfmLoopbackMsgPriority -- wwpLeosTceCfmLoopbackMsgRowStatus Not applicable to 6.x
                         wwpLeosTceCfmLoopbackMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1 no-access
An entry (conceptual row) in the wwpLeosTceCfmLoopbackMsgTable.
                             wwpLeosTceCfmLoopbackMsgLocalMEPID 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.1 unsigned32 no-access
This object is used to specify the port.
                             wwpLeosTceCfmLoopbackMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.2 unsigned32 read-only
This object is used to specify the MEPID. This object should only be set if wwpLeosTceCfmLoopbackMsgTargetMacAddr is not specified else error will be returned.
                             wwpLeosTceCfmLoopbackMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.3 macaddress read-only
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosTceCfmLoopbackMsgTargetMEPID is not specified else error will be returned.
                             wwpLeosTceCfmLoopbackMsgCount 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.4 integer read-only
This object is used to specify the LoopbackMsg count to be used when sending link LoopbackMsg.
                             wwpLeosTceCfmLoopbackMsgData 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.5 displaystring read-only
This object is used to specify the LoopbackMsg data to be used when sending link LoopbackMsg.
                             wwpLeosTceCfmLoopbackMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.6 integer read-only
This object is used to specify the LoopbackMsg priority to be used when sending link LoopbackMsg.
                             wwpLeosTceCfmLoopbackMsgServiceName 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.7 displaystring read-only
This object is used to specify the Service used when sending link LoopbackMsg.
                             wwpLeosTceCfmLoopbackMsgSubPortName 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.8 displaystring read-only
This object is used to specify the sub-port used when sending link LoopbackMsg.
                             wwpLeosTceCfmLoopbackMsgNextLbmTransId 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.9 unsigned32 read-only
This object is used to specify next LoopbackMsg transaction id.
                             wwpLeosTceCfmLoopbackMsgTotalTxLbm 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.10 unsigned32 read-only
This object is used to specify total LoopbackMsg sent.
                             wwpLeosTceCfmLoopbackMsgTotalRxLbrIo 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.11 unsigned32 read-only
This object is used to specify total in-order LoopbackMsg received.
                             wwpLeosTceCfmLoopbackMsgTotalRxLbrOoo 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.12 unsigned32 read-only
This object is used to specify total out of order LoopbackMsg received.
                             wwpLeosTceCfmLoopbackMsgRowStatus 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.13 rowstatus read-only
Used to manage the creation and deletion of the conceptual rows in this table. To send a LoopbackMsg, a manager must set this object to 'createAndGo'. There is no concept of delete a LoopbackMsg in this table.
                             wwpLeosTceCfmLoopbackMsgTotalRxLbrContentMismatch 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.14 unsigned32 read-only
This object is used to specify total content mismatch LoopbackMsg received.
                             wwpLeosTceCfmLoopbackMsgTotalRxLbrUnexpected 1.3.6.1.4.1.6141.2.60.35.1.20.3.1.1.15 unsigned32 read-only
This object is used to specify total unexpected LoopbackMsg received.
                 wwpLeosTceCfmStack 1.3.6.1.4.1.6141.2.60.35.1.20.5
                     wwpLeosTceCfmPortStackTable 1.3.6.1.4.1.6141.2.60.35.1.20.5.1 no-access
The (conceptual) table listing the display parameters for the CFM port stack table. Not applicable to 6.x
                         wwpLeosTceCfmPortStackEntry 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1 no-access
An entry (conceptual row) in the wwpLeosTceCfmPortStackTable.
                             wwpLeosTceCfmPortStackServiceType 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.1 integer no-access
This object is used to specify the CFM sub-port service type. Enumeration: 'pbt': 2, 'vs': 1.
                             wwpLeosTceCfmPortStackServiceIndex 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.2 unsigned32 no-access
A unique identifier for CFM domain entry.
                             wwpLeosTceCfmPortStackSubPortType 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.3 integer no-access
This object is used to specify the CFM sub-port type. Enumeration: 'decapPbt': 3, 'vs': 1, 'encapPbt': 2.
                             wwpLeosTceCfmPortStackSubPortIndex 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.4 unsigned32 no-access
This object is used to specify the CFM sub-port index.
                             wwpLeosTceCfmPortStackSubPortName 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.5 displaystring read-only
This object is used to specify the CFM sub-port name.
                             wwpLeosTceCfmPortStackOperState 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.6 integer read-only
This object is used to specify the CFM sub-port operational state. Enumeration: 'unequipped': 8, 'unknown': 1, 'enabled': 3, 'invalid': 2, 'loopbackRx': 7, 'disabled': 4, 'notAuthenticated': 5, 'loopbackTx': 6.
                             wwpLeosTceCfmPortStackPgid 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.7 unsigned32 read-only
This object is used to specify the CFM sub-port group id.
                             wwpLeosTceCfmPortStackBayIndex 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.8 unsigned32 read-only
This object is used to specify the CFM sub-port agent bay.
                             wwpLeosTceCfmPortStackShelfIndex 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.9 unsigned32 read-only
This object is used to specify the CFM sub-port agent shelf.
                             wwpLeosTceCfmPortStackModuleIndex 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.10 unsigned32 read-only
This object is used to specify the CFM sub-port agent slot. Index value of 255 is reserved for Lag ports.
                             wwpLeosTceCfmPortStackVsPbtName 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.11 displaystring read-only
This object is used to specify the CFM PBT name.
                             wwpLeosTceCfmPortStackEgressXformTagValue1 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.13 unsigned32 read-only
This object is used to specify the egress tag value.
                             wwpLeosTceCfmPortStackEgressXformTagPriority1 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.14 unsigned32 read-only
This object is used to specify the egress tag priority.
                             wwpLeosTceCfmPortStackEgressXformTagEtype1 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.15 unsigned32 read-only
This object is used to specify the egress tag etype.
                             wwpLeosTceCfmPortStackEgressXformTagValue2 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.16 unsigned32 read-only
This object is used to specify the egress tag value.
                             wwpLeosTceCfmPortStackEgressXformTagPriority2 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.17 unsigned32 read-only
This object is used to specify the egress tag priority.
                             wwpLeosTceCfmPortStackEgressXformTagEtype2 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.18 unsigned32 read-only
This object is used to specify the egress tag etype.
                             wwpLeosTceCfmPortStackMepCount 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.19 unsigned32 read-only
This object is used to specify the MEP counts in both directions.
                             wwpLeosTceCfmPortStackMipLevel 1.3.6.1.4.1.6141.2.60.35.1.20.5.1.1.20 unsigned32 read-only
This object is used to specify the port stack MIP level.
                 wwpLeosTceCfmMEP 1.3.6.1.4.1.6141.2.60.35.1.20.7
                     wwpLeosTceCfmMEPTable 1.3.6.1.4.1.6141.2.60.35.1.20.7.1 no-access
The (conceptual) table listing the config parameters for the CFM MEP table. Not applicable to 6.x
                         wwpLeosTceCfmMEPEntry 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmMEPTable.
                             wwpLeosTceCfmMEPId 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.1 unsigned32 no-access
This is used as the index in the table.This object specifies the mep id for the given service.
                             wwpLeosTceCfmMEPAdminState 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.2 integer read-write
This object is used to specify the admin state of CFM MEP. Enumeration: 'disabled': 1, 'enabled': 2.
                             wwpLeosTceCfmMEPOperState 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.3 integer read-only
This object is used to specify the oper state of CFM MEP. Enumeration: 'disabled': 1, 'enabled': 2.
                             wwpLeosTceCfmMEPDirection 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.4 integer read-only
This object is used to specify the MEP direction of the service. This object can only be set if wwpLeosCfmServiceIndex is of type vlan. Enumeration: 'down': 2, 'up': 1.
                             wwpLeosTceCfmMEPCCMState 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.5 integer read-write
This object specifies the CCM transmission for the service specified by wwpLeosCfmServiceType. Enumeration: 'on': 1, 'off': 2.
                             wwpLeosTceCfmMEPCCMPriority 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.6 integer read-write
This object specified the priority of CCM messages transmitted.
                             wwpLeosTceCfmMEPLTMPriority 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.7 integer read-write
This object specifies the priority received on the given service and port.
                             wwpLeosTceCfmMEPMacAddr 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.8 macaddress read-only
This object specifies the mac address received on the given service and port..
                             wwpLeosTceCfmMEPNextLbmSeqNumber 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.9 counter32 read-only
This object specifies the next lbm sequence number received on the given service and port.
                             wwpLeosTceCfmMEPRxValidInOrderLoopbackReply 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.10 counter32 read-only
This object specifies the total valid in order loopback replies received on the given service and port.
                             wwpLeosTceCfmMEPRxValidOutOrderLoopbackReply 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.11 counter32 read-only
This object specifies the total valid out of order loopback replies received on the given service and port.
                             wwpLeosTceCfmMEPNextLTMSeqNumber 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.12 counter32 read-only
This object specifies the next LTM sequence number received on the given service and port.
                             wwpLeosTceCfmMEPNumLoopbackRepliesTxmt 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.13 counter32 read-only
This object specifies the flags total loopback replies transmitted on the given service and port.
                             wwpLeosTceCfmMEPNumLTMRecevied 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.14 counter32 read-only
This object specifies the total LTM messages received on the given service and port.
                             wwpLeosTceCfmMEPNumLTMTxmt 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.15 counter32 read-only
This object specifies the total ltm transmitted on the given service and port.
                             wwpLeosTceCfmMEPNumCCMTxmt 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.16 counter32 read-only
This object specifies the total CCM messages transmitted on the given service and port.
                             wwpLeosTceCfmMEPRowStatus 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.17 rowstatus read-only
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'.
                             wwpLeosTceCfmMEPNumDMMSent 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.18 counter32 read-only
This object specifies the total delay measurement messages transmitted on the given service and port.
                             wwpLeosTceCfmMEPDMMDelay 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.19 counter32 read-only
This object specifies the average delay in microseconds measured during the last DMM performance test on the given service and port.
                             wwpLeosTceCfmMEPDMMJitter 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.20 counter32 read-only
This object specifies the average jitter in microseconds measured during the last DMM performance test on the given service and port.
                             wwpLeosTceCfmMEPNumLMMSent 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.21 counter32 read-only
This object specifies the total frame loss measurement messages transmitted on the given service and port.
                             wwpLeosTceCfmMEPLMMFrameLossNear 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.22 counter32 read-only
This object specifies the number of lost frames on the near side measured during the last LMM performance test on the given service and port.
                             wwpLeosTceCfmMEPLMMFrameLossFar 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.23 counter32 read-only
This object specifies the number of lost frames on the far side measured during the last LMM performance test on the given service and port.
                             wwpLeosTceCfmMEPLiType 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.24 integer read-only
This object specifies Li Type on which the Mep is created. Enumeration: 'none': 99, 'mplsStaticPeSpokeVC': 5, 'mplsStaticMtuSpokeVC': 7, 'pbtService': 2, 'mplsDynamicPeSpokeVC': 6, 'mplsDynamicPeMeshVC': 4, 'mplsDynamicMtuSpokeVC': 8, 'vs': 1, 'mplsStaticPeMeshVC': 3.
                             wwpLeosTceCfmMEPLiIndex 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.25 unsigned32 read-only
This object specifies LiIndex for creating MEP
                             wwpLeosTceCfmMEPServiceName 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.50 displaystring read-only
This object is used to specify the service name assigned to this port.
                             wwpLeosTceCfmMEPSubPortName 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.51 displaystring read-only
This object represents the sub-port, PbtService or Mpls Vc name assigned to the given service and port.
                             wwpLeosTceCfmMEPVsPbtName 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.52 displaystring read-only
This object represents the virtual switch or Pbt tunnel assigned to the given service and port.
                             wwpLeosTceCfmMEPLogicalPortName 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.53 displaystring read-only
This object represents the logical port name assigned to the given service and port.
                             wwpLeosTceCfmMEPSubPortIndex 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.54 unsigned32 read-write
This object is used to specify the CFM sub-port index.
                             wwpLeosTceCfmMEPEncapsulation 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.55 integer read-only
This object is used to specify the encapsulation applied to the service and port. Enumeration: 'ieee802dot1d': 1, 'pbtCfmEncap': 2.
                             wwpLeosTceCfmMEPLeadPortBayIndex 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.56 unsigned32 read-only
This object is used as to specify the agent bay that MEP is in.
                             wwpLeosTceCfmMEPLeadPortShelfIndex 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.57 unsigned32 read-only
This object is used as to specify the agent shelf that MEP is in.
                             wwpLeosTceCfmMEPLeadPortModuleIndex 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.58 unsigned32 read-only
This object is used as to specify the agent module that MEP is in. Index = 255 is reserved for Lag ports and this this object cannot be set to 255 in this table.
                             wwpLeosTceCfmMEPPBTBvid 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.59 unsigned32 read-only
This object specifies the BVID assigned to the given service and port.
                             wwpLeosTceCfmMEPPBTEtype 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.60 unsigned32 read-only
This object specifies the E-type assigned to the given service and port.
                             wwpLeosTceCfmMEPNumLbmTxmt 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.61 counter32 read-only
This object specifies the total loopback messages transmitted on the given service and port.
                             wwpLeosTceCfmMEPNumLbmReceived 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.62 counter32 read-only
This object specifies the total loopback messages received on the given service and port.
                             wwpLeosTceCfmMEPNumLoopbackRepliesReceived 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.63 counter32 read-only
This object specifies the total loopback replies received on the given service and port.
                             wwpLeosTceCfmMEPNumLTRepliesTxmt 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.64 counter32 read-only
This object specifies the total link trace replies transmitted on the given service and port.
                             wwpLeosTceCfmMEPNumLTRepliesReceived 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.65 counter32 read-only
This object specifies the total link trace replies received on the given service and port.
                             wwpLeosTceCfmMEPNumUnexpectedLTRepliesReceived 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.66 counter32 read-only
This object specifies the total unexpected link trace replies received on the given service and port.
                             wwpLeosTceCfmMEPNumCCMReceived 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.67 counter32 read-only
This object specifies the total CCM messages received on the given service and port.
                             wwpLeosTceCfmMEPRxContentMismatchLoopbackReply 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.68 counter32 read-only
This object specifies the total content mismatch loopback replies received on the given service and port.
                             wwpLeosTceCfmMEPRxUnexpectedLoopbackReply 1.3.6.1.4.1.6141.2.60.35.1.20.7.1.1.69 counter32 read-only
This object specifies the total unexpected loopback replies received on the given service and port.
                 wwpLeosTceCfmDelay 1.3.6.1.4.1.6141.2.60.35.1.20.12
                       wwpLeosTceCfmDelayMsgTable 1.3.6.1.4.1.6141.2.60.35.1.20.12.1 no-access
The (conceptual) table listing the config parameters for the DelayMeasurementMsg. Not applicable to 6.x
                           wwpLeosTceCfmDelayMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmDelayMsgTable. To send, clear or cancel the message, the corresponding MsgAction needs to be specified. Individual objects in this table cannot be set. RowStatus is a read-only field. To send or cancel a message, the TargetMepID or the TargtetMacAddr objects need to be specified. Clear msgAction clears the counters for the message
                               wwpLeosTceCfmDelayMsgLocalMEPId 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.1 integer read-only
This object is used to specify the local MEPId.
                               wwpLeosTceCfmDelayMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.2 unsigned32 read-only
This object is used to specify the MEPID. This object should only be set if wwpLeosTceCfmDelayMsgTargetMacAddr is not specified else error will be returned.
                               wwpLeosTceCfmDelayMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.3 macaddress read-only
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosTceCfmDelayMsgTargetMEPID is not specified else error will be returned.
                               wwpLeosTceCfmDelayMsgCount 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.4 integer read-only
This object is used to specify the DelayMeasurementMsg count to be used when sending link DelayMeasurementMsg.
                               wwpLeosTceCfmDelayMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.5 integer read-only
This object is used to specify the DelayMeasurementMsg priority to be used when sending link DelayMeasurementMsg.
                               wwpLeosTceCfmDelayMsgRowStatus 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.6 rowstatus read-only
Is a display read-only field only. A row in this table is created by the system when a service and mep is created
                               wwpLeosTceCfmDelayMsgRepeatInterval 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.40 unsigned32 read-only
Represents the Transmission Period for the Cfm Delay.
                               wwpLeosTceCfmDelayMsgDelayThreshold 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.41 integer read-only
Represents the Threshold for the average delay
                               wwpLeosTceCfmDelayMsgJitterThreshold 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.42 integer read-only
Represents the threshold value for the Jitter
                               wwpLeosTceCfmDelayMsgServiceName 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.43 displaystring read-only
This object is used to specify the service to be used when sending DelayMsg.
                               wwpLeosTceCfmDelayMsgSubPortName 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.44 displaystring read-only
This object represents the sub-port name where the DelayMsg was sent.
                               wwpLeosTceCfmDelayMsgDelay 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.50 unsigned32 read-only
This object represents the Average Delay
                               wwpLeosTceCfmDelayMsgJitter 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.51 unsigned32 read-only
This object represents the average jitter
                               wwpLeosTceCfmDelayMsgTotalTxDmm 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.52 unsigned32 read-only
This object represents the total Delaymessages transmitted
                               wwpLeosTceCfmDelayMsgTotalRxDmm 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.53 unsigned32 read-only
This object represents the total Delaymessages received
                               wwpLeosTceCfmDelayMsgTotalTxDmr 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.54 unsigned32 read-only
This object represents the total DMRs transmitted
                               wwpLeosTceCfmDelayMsgTotalRxDmr 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.55 unsigned32 read-only
This object represents the total DMRs received
                               wwpLeosTceCfmDelayMsgAction 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.56 sendstate read-only
This object represents the action for the message (send, clear or cancel)
                               wwpLeosTceCfmDelayMsgMaxDelay 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.57 unsigned32 read-only
This object represents the Maximum Delay
                               wwpLeosTceCfmDelayMsgMaxJitter 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.58 unsigned32 read-only
This object represents the Maximum jitter
                               wwpLeosTceCfmDelayMsgMaxDelayThreshold 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.59 integer read-only
Represents the threshold for maximum delay
                               wwpLeosTceCfmDelayMsgMaxJitterThreshold 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.60 integer read-only
Represents the threshold value for maximum Jitter
                               wwpLeosTceCfmDelayMsgMinDelay 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.61 unsigned32 read-only
This object represents the Maximum Delay
                               wwpLeosTceCfmDelayMsgMinJitter 1.3.6.1.4.1.6141.2.60.35.1.20.12.1.1.62 unsigned32 read-only
This object represents the Maximum jitter
                 wwpLeosTceCfmFrameLoss 1.3.6.1.4.1.6141.2.60.35.1.20.13
                       wwpLeosTceCfmFrameLossMsgTable 1.3.6.1.4.1.6141.2.60.35.1.20.13.1 no-access
The (conceptual) table listing the config parameters for the FrameLossMeasurementMsg. Not applicable to 6.x
                           wwpLeosTceCfmFrameLossMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmFrameLossMsgTable. To send, clear or cancel the message, the corresponding MsgAction needs to be specified. Individual objects in this table cannot be set. RowStatus is a read-only field. To send or cancel a message, the TargetMepID or the TargtetMacAddr objects need to be specified. Clear msgAction clears the counters for the message
                               wwpLeosTceCfmFrameLossMsgLocalMEPId 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.1 integer no-access
This object is used to specify the Local MEPID at the source.
                               wwpLeosTceCfmFrameLossMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.2 unsigned32 read-only
This object is used to specify the MEPID. This object should only be set if wwpLeosTceCfmFrameLossMsgTargetMacAddr is not specified else error will be returned.
                               wwpLeosTceCfmFrameLossMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.3 macaddress read-only
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosTceCfmFrameLossMsgTargetMEPID is not specified else error will be returned.
                               wwpLeosTceCfmFrameLossMsgCount 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.4 integer read-only
This object is used to specify the FrameLossMeasurementMsg count to be used when sending link FrameLossMeasurementMsg.
                               wwpLeosTceCfmFrameLossMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.5 integer read-only
This object is used to specify the FrameLossMeasurementMsg priority to be used when sending link FrameLossMeasurementMsg.
                               wwpLeosTceCfmFrameLossMsgRowStatus 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.6 rowstatus read-only
Is a read-only field. A row in this table is system-generated on creation of cfm service and cfm mep objects
                               wwpLeosTceCfmFrameLossMsgRepeatInterval 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.50 unsigned32 read-only
Represents the Transmission Interval for the Frame loss messages
                               wwpLeosTceCfmFrameLossMsgNearLossThreshold 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.51 integer read-only
Represents the threshold value for the near-end frame loss
                               wwpLeosTceCfmFrameLossMsgFarLossThreshold 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.52 integer read-only
Represents the threshold value for the far-end frame loss
                               wwpLeosTceCfmFrameLossMsgServiceName 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.53 displaystring read-only
This object is used to specify the service to be used when sending FrameLossMsg (LMM).
                               wwpLeosTceCfmFrameLossMsgSubPortName 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.54 displaystring read-only
This object is used to specify the sub-port name to be used when sending FrameLossMsg (LMM).
                               wwpLeosTceCfmFrameLossMsgFrameLossNear 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.55 unsigned32 read-only
This object represents the near-end Frame Loss. For a MEP, near-end Frame loss refers to frame loss associated with the ingress data frames.
                               wwpLeosTceCfmFrameLossMsgFrameLossFar 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.56 unsigned32 read-only
This object represents the far-end Frame Loss. For a MEP, far-end Frame loss refers to frame loss associated with the egress data frames.
                               wwpLeosTceCfmFrameLossMsgTotalTxLmm 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.57 unsigned32 read-only
This object represents the total LMMs transmitted
                               wwpLeosTceCfmFrameLossMsgTotalRxLmm 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.58 unsigned32 read-only
This object represents the total LMMs received
                               wwpLeosTceCfmFrameLossMsgTotalTxLmr 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.59 unsigned32 read-only
This object represents the total LMRs transmitted
                               wwpLeosTceCfmFrameLossMsgTotalRxLmr 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.60 unsigned32 read-only
This object represents the total LMRs received
                               wwpLeosTceCfmFrameLossMsgAction 1.3.6.1.4.1.6141.2.60.35.1.20.13.1.1.61 sendstate read-only
This object represents the action for the message (send, clear or cancel).
                 wwpLeosTceCfmMipCCMDb 1.3.6.1.4.1.6141.2.60.35.1.20.14
                       wwpLeosTceCfmMipCCMDbTable 1.3.6.1.4.1.6141.2.60.35.1.20.14.1 no-access
The (conceptual) table listing the display parameters for the MIP CCM Db table. Not applicable to 6.x
                           wwpLeosTceCfmMipCCMDbEntry 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmMipCCMDbTable.
                               wwpLeosTceCfmMipCCMDbIndex 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.1 unsigned32 no-access
Mip CCM database index.
                               wwpLeosTceCfmMipCCMDbMacAddr 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.2 macaddress read-only
MAC Address
                               wwpLeosTceCfmMipCCMDbServiceName 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.3 displaystring read-only
Service Name
                               wwpLeosTceCfmMipCCMDbSubPortName 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.4 displaystring read-only
SubPort Name
                               wwpLeosTceCfmMipCCMdbNumCCMRx 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.5 counter32 read-only
Total Received CCMs
                               wwpLeosTceCfmMipCCMDbCCMRxTime 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.6 unsigned32 read-only
CCM Rx Time in ms
                               wwpLeosTceCfmMipCCMDbLevel 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.7 integer read-only
Level
                               wwpLeosTceCfmMipCCMDbMEPID 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.8 integer read-only
Mep Id
                               wwpLeosTceCfmMipRDI 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.9 integer read-only
RDI Enumeration: 'on': 1, 'off': 2.
                               wwpLeosTceCfmMipLastPortStatus 1.3.6.1.4.1.6141.2.60.35.1.20.14.1.1.10 integer read-only
Last Port Status Enumeration: 'none': 99, 'up': 2, 'blocked': 1.
           wwpLeosCfmExtMIBObj 1.3.6.1.4.1.6141.2.60.35.1.21
                 wwpLeosCfmExtLoopback 1.3.6.1.4.1.6141.2.60.35.1.21.3
                     wwpLeosCfmExtLoopbackMsgTable 1.3.6.1.4.1.6141.2.60.35.1.21.3.1 no-access
The (conceptual) table listing the configuration parameters for the LoopbackMsg. The following attributes are required to create a LoopbackMsg: -- wwpLeosCfmServiceIndex -- wwpLeosCfmExtLoopbackMsgTargetMEPID or -- wwpLeosCfmExtLoopbackMsgTargetMacAddr -- wwpLeosCfmExtLoopbackMsgCount -- wwpLeosCfmExtLoopbackMsgData -- wwpLeosCfmExtLoopbackMsgPriority -- wwpLeosCfmExtLoopbackMsgAction -- wwpLeosCfmExtLoopbackMsgInterval -- wwpLeosCfmExtLoopbackMsgTimeout -- wwpLeosCfmExtLoopbackMsgLoss
                         wwpLeosCfmExtLoopbackMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmExtLoopbackMsgTable.
                             wwpLeosCfmExtLoopbackMsgLocalMEPID 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.1 unsigned32 no-access
This object is used to specify the port.
                             wwpLeosCfmExtLoopbackMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.2 unsigned32 read-only
This object is used to specify the MEPID. This object should only be set if wwpLeosCfmExtLoopbackMsgTargetMacAddr is not specified else error will be returned.
                             wwpLeosCfmExtLoopbackMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.3 macaddress read-only
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosCfmExtLoopbackMsgTargetMEPID is not specified else error will be returned.
                             wwpLeosCfmExtLoopbackMsgCount 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.4 integer read-only
This object is used to specify the LoopbackMsg count to be used when sending link LoopbackMsg.
                             wwpLeosCfmExtLoopbackMsgData 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.5 displaystring read-only
This object is used to specify the LoopbackMsg data to be used when sending link LoopbackMsg.
                             wwpLeosCfmExtLoopbackMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.6 integer read-only
This object is used to specify the LoopbackMsg priority to be used when sending link LoopbackMsg.
                             wwpLeosCfmExtLoopbackMsgAction 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.7 sendstate read-only
This object represents the action for the message (send, clear or cancel). If set to send(1) and if wwpLeosCfmExtLoopbackMsgTargetMacAddr is specified then loopbackMsg is sent to remote Mac. If set to send(1) and if wwpLeosCfmExtLoopbackMsgTargetMEPID is specified then loopbackMsg is sent to remote mepid. If set to clear(2) will clear mep statistics for given service and mepid. If set to cancel(3) will return commit_failed_error.
                             wwpLeosCfmExtLoopbackMsgInterval 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.8 integer read-only
This object is used to specify the LoopbackMsg interval to be used when sending link LoopbackMsg.
                             wwpLeosCfmExtLoopbackMsgTimeout 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.9 integer read-only
This object is used to specify the LoopbackMsg timeout to be used when sending link LoopbackMsg.
                             wwpLeosCfmExtLoopbackMsgLoss 1.3.6.1.4.1.6141.2.60.35.1.21.3.1.1.10 integer read-only
This object is used to display the LoopbackMsg loss count.
                 wwpLeosCfmExtMEP 1.3.6.1.4.1.6141.2.60.35.1.21.7
                     wwpLeosCfmExtMEPTable 1.3.6.1.4.1.6141.2.60.35.1.21.7.1 no-access
The (conceptual) table listing the configuration parameters for the CFM MEP table. To create entry in this table use SNMP multiple set operation. - wwpLeosCfmExtPortId must be specified. - wwpLeosCfmExtVlanId must be specified. - wwpLeosCfmExtMEPRowStatus must be set to 'CreateAndGo'
                         wwpLeosCfmExtMEPEntry 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmMEPTable.
                             wwpLeosCfmExtMEPId 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.1 unsigned32 no-access
This is used as the index in the table. This object specifies the MEP id for the given service.
                             wwpLeosCfmExtPortId 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.2 integer read-only
                             wwpLeosCfmExtVlanId 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.3 integer read-only
                             wwpLeosCfmExtMEPAdminState 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.4 integer read-write
This object is used to specify the admin state of CFM MEP. Enumeration: 'disabled': 1, 'enabled': 2.
                             wwpLeosCfmExtMEPOperState 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.5 integer read-only
This object is used to specify the oper state of CFM MEP. Enumeration: 'disabled': 1, 'enabled': 2.
                             wwpLeosCfmExtMEPDirection 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.6 integer read-only
This object is used to specify the MEP direction of the service. This object can only be set if wwpLeosCfmServiceIndex is of type VLAN. Enumeration: 'down': 2, 'up': 1.
                             wwpLeosCfmExtMEPCCMState 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.7 integer read-write
This object specifies the CCM transmission for the service specified by wwpLeosCfmServiceType. Enumeration: 'on': 1, 'off': 2.
                             wwpLeosCfmExtMEPCCMPriority 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.8 integer read-write
This object specified the priority of CCM messages transmitted.
                             wwpLeosCfmExtMEPLTMPriority 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.9 integer read-write
The priority received on the given service and MEP.
                             wwpLeosCfmExtMEPMacAddr 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.10 macaddress read-only
The mac address received on the given service and MEP.
                             wwpLeosCfmExtMEPNextLbmSeqNumber 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.11 counter32 read-only
The next lbm sequence number received on the given service and MEP.
                             wwpLeosCfmExtMEPNextLTMSeqNumber 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.12 counter32 read-only
The next LTM sequence number received on the given service and MEP.
                             wwpLeosCfmExtMEPRowStatus 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.13 rowstatus read-only
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this to 'destroy'.
                             wwpLeosCfmExtMEPDMMDelay 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.14 counter32 read-only
The average delay in microseconds measured during the last DMM performance test on the given service and MEP.
                             wwpLeosCfmExtMEPDMMJitter 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.15 counter32 read-only
The average jitter in microseconds measured during the last DMM performance test on the given service and MEP.
                             wwpLeosCfmExtMEPLMMFrameLossNear 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.16 counter32 read-only
The number of lost frames on the near side measured during the last LMM performance test on the given service and MEP.
                             wwpLeosCfmExtMEPLMMFrameLossFar 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.17 counter32 read-only
The number of lost frames on the far side measured during the last LMM performance test on the given service and MEP.
                             wwpLeosCfmExtMEPServiceName 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.50 displaystring read-only
The service name assigned to this MEP.
                             wwpLeosCfmExtMEPInterfaceName 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.51 displaystring read-only
The interface name associated with this MEP.
                             wwpLeosCfmExtMEPServiceInstanceName 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.52 displaystring read-only
The service instance name associated with this MEP.
                             wwpLeosCfmExtMEPLogicalPortName 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.53 displaystring read-only
Logical port name associated with this MEP.
                             wwpLeosCfmExtMEPTagMode 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.54 integer read-write
Tag-mode for the given mep and service. When on(1) the MEP originates all frames with an additional inner-most tag. On a down MEP this is the CVLAN tag. Enumeration: 'on': 1, 'off': 2.
                             wwpLeosCfmExtMEPTagVID 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.55 integer read-write
VLAN ID for the additional tag given mep and service.
                             wwpLeosCfmExtMEPTagPriority 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.56 integer read-write
The priority encoded in the additional tag.
                             wwpLeosCfmExtMEPLMMBadSequence 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.57 counter32 read-only
This object specifes the number of frames with bad sequence numbers measured during the last LMM performance test on the given service and MEP.
                             wwpLeosCfmExtMEPCCMComment 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.58 displaystring read-only
This mib object allows to set the MEP CCM Comment.
                             wwpLeosCfmExtMEPLMMMissingSequence 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.59 counter32 read-only
This object specifes the number of frames with missing sequence numbers measured during the last LMM performance test on the given service and MEP.
                             wwpLeosCfmExtMEPBlockOppositeFaultCurrent 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.60 counter32 read-only
The number of frames seen in the current sample window.
                             wwpLeosCfmExtMEPBlockOppositeFaultThreshold 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.61 unsigned32 read-write
The number of frames to block before generating a fault.
                             wwpLeosCfmExtMEPBlockOppositeFaultTime 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.62 integer read-write
The frame sample window size in minutes.
                             wwpLeosCfmExtMEPDMMMinDelay 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.63 counter32 read-only
The minimum delay in microseconds measured during the last DMM performance test on the given service and MEP.
                             wwpLeosCfmExtMEPDMMMaxDelay 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.64 counter32 read-only
The maximum delay in microseconds measured during the last DMM performance test on the given service and MEP.
                             wwpLeosCfmExtMEPDMMMinJitter 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.65 counter32 read-only
The minimum jitter in microseconds measured during the last DMM performance test on the given service and MEP.
                             wwpLeosCfmExtMEPDMMMaxJitter 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.66 counter32 read-only
The maximum jitter in microseconds measured during the last DMM performance test on the given service and MEP.
                             wwpLeosCfmExtMEPAccelerated 1.3.6.1.4.1.6141.2.60.35.1.21.7.1.1.67 truthvalue read-only
Specifies if the mep is monitored in hardware.
                     wwpLeosCfmExtMEPStatsTable 1.3.6.1.4.1.6141.2.60.35.1.21.7.2 no-access
The (conceptual) table listing the configuration parameters for the CFM MEP table.
                         wwpLeosCfmExtMEPStatsEntry 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1 no-access
An entry (conceptual row) in the wwpLeosCfmMEPTable.
                             wwpLeosCfmExtMEPStatsTotalValidFramesReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.1 counter64 read-only
This object specifies total valid frames received.
                             wwpLeosCfmExtMEPStatsTotalInvalidFramesReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.2 counter64 read-only
This object specifies total invalid frames received.
                             wwpLeosCfmExtMEPStatsTotalInvalidMessageOverflowReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.3 counter64 read-only
This object specifies total invalid message overflow frames received
                             wwpLeosCfmExtMEPStatsInvalidPortStatusTLVReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.4 counter64 read-only
This object specifies total invalid port status TLVs received.
                             wwpLeosCfmExtMEPStatsInvalidInterfaceStatusTLVReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.5 counter64 read-only
This object specifies total invalid interface status TLVs received.
                             wwpLeosCfmExtMEPStatsInvalidSenderIDTLVReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.6 counter64 read-only
This object specifies total invalid senderID frames received.
                             wwpLeosCfmExtMEPStatsCCMTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.7 counter64 read-only
This object specifies total CCM sent.
                             wwpLeosCfmExtMEPStatsValidCCMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.8 counter64 read-only
This object specifies total valid CCMs received.
                             wwpLeosCfmExtMEPStatsCCMInSequenceReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.9 counter64 read-only
This object specifies total CCM received in sequence.
                             wwpLeosCfmExtMEPStatsCCMSequenceErrorsReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.10 counter64 read-only
This object specifies total not in sequence received CCMs.
                             wwpLeosCfmExtMEPStatsMDLevelXconCCMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.11 counter64 read-only
This object specifies Xcon CCMs received.
                             wwpLeosCfmExtMEPStatsMAIDXconCCMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.12 counter64 read-only
This object specifies MAID Xcon CCMs.
                             wwpLeosCfmExtMEPStatsIntervalErrorCCMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.13 counter64 read-only
This object specifies Interval Error CCM received.
                             wwpLeosCfmExtMEPStatsRxInvalidCCM 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.14 counter64 read-only
This object specified invalid CCMs received
                             wwpLeosCfmExtMEPStatsLBMTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.15 counter64 read-only
This object specifies number of LBM sent
                             wwpLeosCfmExtMEPStatsLBRTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.16 counter64 read-only
This object specifies number of LBR sent.
                             wwpLeosCfmExtMEPStatsInOrderLBRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.17 counter64 read-only
This object specifies number of in order LBR received
                             wwpLeosCfmExtMEPStatsOutOfOrderLBRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.18 counter64 read-only
This object specifies Out of order LBR received
                             wwpLeosCfmExtMEPStatsContentMismatchLBRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.19 counter64 read-only
This object specifies number of content mismatch LBR received
                             wwpLeosCfmExtMEPStatsUnexpectedLBRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.20 counter64 read-only
This object specifies unexpected LBR received
                             wwpLeosCfmExtMEPStatsInvalidLBRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.21 counter64 read-only
This object specifies invalid LBR Received.
                             wwpLeosCfmExtMEPStatsLTMTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.22 counter64 read-only
This object specifies number of LTM sent.
                             wwpLeosCfmExtMEPStatsValidLTMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.23 counter64 read-only
This object specifies total valid LTM received
                             wwpLeosCfmExtMEPStatsTotalInvalidLTMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.24 counter64 read-only
This object specifies total invalid LTM received.
                             wwpLeosCfmExtMEPStatsInvalidLTRAction 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.25 counter64 read-only
This object specifies total invalid LTR action.
                             wwpLeosCfmExtMEPStatsLTRTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.26 counter64 read-only
This object specifies total LTR sent.
                             wwpLeosCfmExtMEPStatsLTRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.27 counter64 read-only
This object specifies unexpected LTR sent.
                             wwpLeosCfmExtMEPStatsDMMTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.28 counter64 read-only
This object specifies total DMM sent.
                             wwpLeosCfmExtMEPStatsDMMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.29 counter64 read-only
This object specifies total DMM received.
                             wwpLeosCfmExtMEPStatsDMRTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.30 counter64 read-only
This object specifies total DMR sent.
                             wwpLeosCfmExtMEPStatsDMRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.31 counter64 read-only
This object specifies total DMR received
                             wwpLeosCfmExtMEPStatsDMReplyTimeout 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.32 counter64 read-only
This object specifies DMR Timeout.
                             wwpLeosCfmExtMEPStatsLMMTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.33 counter64 read-only
This object specifies total LMM Sent.
                             wwpLeosCfmExtMEPStatsLMMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.34 counter64 read-only
This object specifies total LMM received
                             wwpLeosCfmExtMEPStatsLMRTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.35 counter64 read-only
This object specifies total LMR sent.
                             wwpLeosCfmExtMEPStatsLMRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.36 counter64 read-only
This object specifies total LMR Received.
                             wwpLeosCfmExtMEPStatsLMRTimeout 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.37 counter64 read-only
This object specifies total LMR Timeout.
                             wwpLeosCfmExtMEPStatsMepIdErrorCCMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.38 counter64 read-only
This object specifies total MEPID Error CCM Received.
                             wwpLeosCfmExtMEPStatsClear 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.40 integer read-write
Setting this object to clear will clear MEP stats for the given service and MepId. This object can't be set to none Enumeration: 'clear': 1, 'none': 2.
                             wwpLeosCfmExtMEPStatsValidLBMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.41 counter64 read-only
This object specifies Valid LBM Received.
                             wwpLeosCfmExtMEPStatsInvalidLBMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.42 counter64 read-only
This object specifies total invalid LBM Received.
                             wwpLeosCfmExtMEPStatsUnexpectedLTRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.43 counter64 read-only
This object specifies total unexpected LTR Received.
                             wwpLeosCfmExtMEPStatsInvalidDMMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.44 counter64 read-only
This object specifies total invalid DMM Received.
                             wwpLeosCfmExtMEPStatsInvalidDMRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.45 counter64 read-only
This object specifies total invalid DMR Received.
                             wwpLeosCfmExtMEPStatsUnexpectedDMRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.46 counter64 read-only
This object specifies total unexpected DMR Received.
                             wwpLeosCfmExtMEPStatsInvalidLMMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.47 counter64 read-only
This object specifies total invalid LMM Received.
                             wwpLeosCfmExtMEPStatsInvalidLMRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.48 counter64 read-only
This object specifies total invalid LMR Received.
                             wwpLeosCfmExtMEPStatsInvalidBlockedOppositeMep 1.3.6.1.4.1.6141.2.60.35.1.21.7.2.1.49 counter64 read-only
This object specifies total invalid frames blocked by opposite MEP.
                     wwpLeosCfmExtMEPLastStatsTable 1.3.6.1.4.1.6141.2.60.35.1.21.7.3 no-access
The (conceptual) table listing the configuration parameters for the CFM MEP table.
                         wwpLeosCfmExtMEPLastStatsEntry 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1 no-access
An entry (conceptual row) in the wwpLeosCfmMEPTable.
                             wwpLeosCfmExtMEPLastStatsPriority 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.1 counter64 read-only
This object specifies last LBM Priority
                             wwpLeosCfmExtMEPLastStatsLBMCount 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.2 counter64 read-only
This object specifies last LBM Count
                             wwpLeosCfmExtMEPLastStatsLBMSent 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.3 counter64 read-only
This object specifies last number LBM sent
                             wwpLeosCfmExtMEPLastStatsLBMToSend 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.4 counter64 read-only
This object specifies last LBM to send.
                             wwpLeosCfmExtMEPLastStatsInOrderLBRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.5 counter64 read-only
This object specifies last In oder LBR received
                             wwpLeosCfmExtMEPLastStatsOutOfOrderLBRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.6 counter64 read-only
This object specifies last out of order LBR received
                             wwpLeosCfmExtMEPLastStatsDMMPriority 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.7 counter64 read-only
This object specifies Last DMM Priority
                             wwpLeosCfmExtMEPLastStatsDMMTxmt 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.8 counter64 read-only
This object specifies number of last DMM sent
                             wwpLeosCfmExtMEPLastStatsDMMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.9 counter64 read-only
This object specifies last DMM Received
                             wwpLeosCfmExtMEPLastStatsDMMDelay 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.10 counter64 read-only
This object specifies Last DMM Delay.
                             wwpLeosCfmExtMEPLastStatsDMMJitter 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.11 counter64 read-only
This object specifies last DMM Jitter.
                             wwpLeosCfmExtMEPLastStatsLMMPriority 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.12 counter64 read-only
This object specifies last LMM priority
                             wwpLeosCfmExtMEPLastStatsLMMTxtm 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.13 counter64 read-only
This object specifies last LMM sent.
                             wwpLeosCfmExtMEPLastStatsLMMReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.14 counter64 read-only
This object specifies number of last LMM received.
                             wwpLeosCfmExtMEPLastStatsFrameLossNear 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.15 counter64 read-only
This object specifies last near Frame Losses
                             wwpLeosCfmExtMEPLastStatsFrameLossFar 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.16 counter64 read-only
This object specifies last far Frames Loss
                             wwpLeosCfmExtMEPLastStatsLTMPriority 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.17 counter64 read-only
This object specifies last LTM Priority
                             wwpLeosCfmExtMEPLastStatsLTMSequenceNo 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.18 counter64 read-only
This object specifies last LTM Sequence number.
                             wwpLeosCfmExtMEPLastStatsLTMInitialTTL 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.19 counter64 read-only
This object specifies last initial TTL LTM.
                             wwpLeosCfmExtMEPLastStatsFrameLossBadSequence 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.20 counter64 read-only
This object specifes the number of frames with bad sequence numbers measured during the last LMM performance test on the given service and Mep.
                             wwpLeosCfmExtMEPLastStatsDMMMinDelay 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.21 counter64 read-only
This object specifies Last DMM Minimum Delay.
                             wwpLeosCfmExtMEPLastStatsDMMMaxDelay 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.22 counter64 read-only
This object specifies Last DMM Maximum Delay.
                             wwpLeosCfmExtMEPLastStatsDMMMinJitter 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.23 counter64 read-only
This object specifies last DMM Minimum Jitter.
                             wwpLeosCfmExtMEPLastStatsDMMMaxJitter 1.3.6.1.4.1.6141.2.60.35.1.21.7.3.1.24 counter64 read-only
This object specifies last DMM Maximum Jitter.
                     wwpLeosCfmExtMEPClearStatistics 1.3.6.1.4.1.6141.2.60.35.1.21.7.4 integer read-write
Setting this object to clear(1) will clear statistics for all Meps across all services Enumeration: 'clear': 1, 'none': 2.
                     wwpLeosCfmExtMEPDelayHistoryTable 1.3.6.1.4.1.6141.2.60.35.1.21.7.5 no-access
The (conceptual) table listing the Y.1731 Delay History table for the CFM MEP.
                         wwpLeosCfmExtMEPDelayHistoryEntry 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1 no-access
An entry (conceptual row) in the wwpLeosCfmMEPDelayHistoryTable.
                             wwpLeosCfmExtMEPDelayHistoryIndex 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.1 integer no-access
This is the history entry index into the table.
                             wwpLeosCfmExtMEPDelayHistoryStatus 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.2 integer read-only
The status of the test sent on the given service and MEP. Enumeration: 'canceled': 3, 'running': 1, 'done': 2, 'timeout': 4.
                             wwpLeosCfmExtMEPDelayHistoryInterval 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.3 integer read-only
The transmit rate of the Y.1731 DMM Frames sent on the given service and MEP.
                             wwpLeosCfmExtMEPDelayHistoryPriority 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.4 integer read-only
The priority of the Y.1731 DMM Frames sent on the given service and MEP.
                             wwpLeosCfmExtMEPDelayHistoryMEPId 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.5 unsigned32 read-only
The remote MEP id the test was ran against.
                             wwpLeosCfmExtMEPDelayHistoryNumDMMSent 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.6 unsigned32 read-only
The number of DMM frames sent on the given service and MEP.
                             wwpLeosCfmExtMEPDelayHistoryNumDMRReceived 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.7 unsigned32 read-only
The number of DMR frames received on the given service and MEP.
                             wwpLeosCfmExtMEPDelayHistoryMinDelay 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.8 unsigned32 read-only
The minimum delay(us) seen on DMR frames received on the given service and MEP.
                             wwpLeosCfmExtMEPDelayHistoryAveDelay 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.9 unsigned32 read-only
The average delay(us) seen on DMR frames received on the given service and MEP.
                             wwpLeosCfmExtMEPDelayHistoryMaxDelay 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.10 unsigned32 read-only
The maximum delay(us) seen on DMR frames received on the given service and MEP.
                             wwpLeosCfmExtMEPDelayHistoryMinJitter 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.11 unsigned32 read-only
The minimum jitter(us) seen on DMR frames received on the given service and MEP.
                             wwpLeosCfmExtMEPDelayHistoryAveJitter 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.12 unsigned32 read-only
The average jitter(us) seen on DMR frames received on the given service and MEP.
                             wwpLeosCfmExtMEPDelayHistoryMaxJitter 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.13 unsigned32 read-only
The maximum jitter(us) seen on DMR frames received on the given service and MEP.
                             wwpLeosCfmExtMEPDelayHistoryStartTime 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.14 unsigned32 read-only
The time the test began on the given service and MEP. The timestamp is the number of seconds since 12AM Jan 1st, 1970
                             wwpLeosCfmExtMEPDelayHistoryStopTime 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.15 unsigned32 read-only
The time the test terminated on the given service and MEP. The timestamp is the number of seconds since 12AM Jan 1st, 1970
                             wwpLeosCfmExtMEPDelayHistoryClear 1.3.6.1.4.1.6141.2.60.35.1.21.7.5.1.16 integer read-write
Setting this object to clear will clear MEP delay history for the given service and MepId. This object can't be set to none Enumeration: 'clear': 1, 'none': 2.
                 wwpLeosCfmExtLinkTrace 1.3.6.1.4.1.6141.2.60.35.1.21.8
                     wwpLeosCfmExtLinkTraceMsgTable 1.3.6.1.4.1.6141.2.60.35.1.21.8.1 no-access
The (conceptual) table listing the configuration parameters for the LinkTraceMsg.
                         wwpLeosCfmExtLinkTraceMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmLinkTraceMsgTable.
                             wwpLeosCfmExtLinkTraceMsgLocalMepID 1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.1 integer no-access
This represent local mepid
                             wwpLeosCfmExtLinkTraceMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.2 integer read-only
This object is used to specify the target MEPID. This object should only be set if wwpLeosCfmLinkTraceMsgTargetMacAddr is not specified else error will be returned.
                             wwpLeosCfmExtLinkTraceMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.3 macaddress read-only
This object is used to specify the target MacAddress to be used when sending link LinkMsg. This object should only be set if wwpLeosCfmLinkTraceMsgTargetMEPID is not specified else error will be returned.
                             wwpLeosCfmExtLinkTraceMsgTTL 1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.4 integer read-only
This object is used to specify the TTL to be used when sending link LinkTraceMsg.
                             wwpLeosCfmExtLinkTraceMsgSequenceNumber 1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.5 integer32 read-only
This object is used to specify the sequence number in the linkTraceMsg.
                             wwpLeosCfmExtLinkTraceMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.6 integer read-only
This object is used to specify the priority to be used when sending LinkTraceMsg.
                             wwpLeosCfmExtLinkTraceMsgAction 1.3.6.1.4.1.6141.2.60.35.1.21.8.1.1.7 sendstate read-only
This object represents the action for the message (send, clear or cancel) If set to send(1) and if wwpLeosCfmExtLinkTraceMsgTargetMacAddr is specified then LinkTraceMsg is sent to remote Mac. If set to send(1) and if wwpLeosCfmExtLinkTraceMsgTargetMEPID is specified then LinktraceMsg is sent to remote mepid. If set to clear(2) will clear mep statistics for given service and mepid. If set to cancel(3) will return commit_failed_error.
                     wwpLeosCfmExtLinkTraceMsgReplyTable 1.3.6.1.4.1.6141.2.60.35.1.21.8.2 no-access
The (conceptual) table listing the display parameters for the LinkTrace Msg Reply.
                         wwpLeosCfmExtLinkTraceMsgReplyEntry 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1 no-access
An entry (conceptual row) in the wwpLeosCfmExtLinkTraceMsgReplyTable.
                             wwpLeosCfmExtLinkTraceMsgReplyTTL 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.1 integer32 read-only
This object is used to specify the TTL of the received LinkTrace msg reply.
                             wwpLeosCfmExtLinkTraceMsgReplyTTLIndex 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.2 unsigned32 read-only
This object provides an additional index when multiple LinkTrace messages are received with the same TTL.
                             wwpLeosCfmExtLinkTraceMsgReplySequenceNumber 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.3 integer32 read-only
This object is used to specify the sequence number of the received LinkTrace msg reply.
                             wwpLeosCfmExtLinkTraceMsgReplyMPMacAddr 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.4 macaddress read-only
This object is used to specify the mac address of the MP of received LinkTrace msg reply.
                             wwpLeosCfmExtLinkTraceMsgReplyMEPID 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.5 integer32 read-only
This object is used to specify the MEP ID of the received LinkTrace msg reply.
                             wwpLeosCfmExtLinkTraceMsgReplyTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.6 macaddress read-only
This object is used to specify the Target Mac address of the received LinkTrace msg reply.
                             wwpLeosCfmExtLinkTraceMsgReplyRelayAction 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.7 integer read-only
This object is used to specify the message reply relay action. Enumeration: 'fdb': 3, 'hit': 6, 'mpdb': 4, 'unknown': 2, 'invalid': 1, 'noLearn': 5.
                             wwpLeosCfmExtLinkTraceMsgReplyIngressPort 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.8 integer read-only
This object is used to specify the message reply ingress port.
                             wwpLeosCfmExtLinkTraceMsgReplyIngressAction 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.9 integer read-only
This object is used to specify the message reply ingress action. Enumeration: 'down': 4, 'none': 5, 'ok': 1, 'vid': 3, 'blocked': 2.
                             wwpLeosCfmExtLinkTraceMsgReplyEgressPort 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.10 integer read-only
This object is used to specify the message reply egress port.
                             wwpLeosCfmExtLinkTraceMsgReplyEgressAction 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.11 integer read-only
This object is used to specify the message reply egress action. Enumeration: 'none': 1, 'ok': 6, 'vid': 5, 'down': 3, 'ttl': 2, 'blocked': 4.
                             wwpLeosCfmExtLinkTraceMsgReplyIngressPortStr 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.12 displaystring read-only
This MIB object is used to specify the message reply ingress port.
                             wwpLeosCfmExtLinkTraceMsgReplyEgressPortStr 1.3.6.1.4.1.6141.2.60.35.1.21.8.2.1.13 displaystring read-only
This MIB object is used to specify the message reply egress port.
                 wwpLeosCfmExtDelay 1.3.6.1.4.1.6141.2.60.35.1.21.12
                       wwpLeosCfmExtDelayMsgTable 1.3.6.1.4.1.6141.2.60.35.1.21.12.1 no-access
The (conceptual) table listing the configuration parameters for the DelayMeasurementMsg.
                           wwpLeosCfmExtDelayMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmDelayMsgTable. To send, clear or cancel the message, the corresponding MsgAction needs to be specified. Individual objects in this table cannot be set. To send or cancel a message, the TargetMepID or the TargtetMacAddr objects need to be specified. Clear msgAction clears the counters for the message
                               wwpLeosCfmExtDelayMsgLocalMEPId 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.1 integer no-access
This object is used to specify the local MEPId.
                               wwpLeosCfmExtDelayMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.2 unsigned32 read-only
This object is used to specify the MEPID. This object should only be set if wwpLeosCfmExtDelayMsgTargetMacAddr is not specified else error will be returned.
                               wwpLeosCfmExtDelayMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.3 macaddress read-only
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosCfmExtDelayMsgTargetMEPID is not specified else error will be returned.
                               wwpLeosCfmExtDelayMsgCount 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.4 integer read-only
This object is used to specify the DelayMeasurementMsg count to be used when sending link DelayMeasurementMsg. Counts between 2 and 600 are valid. The system default count will be used if a value of 0 is entered.
                               wwpLeosCfmExtDelayMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.5 integer read-only
This object is used to specify the DelayMeasurementMsg priority to be used when sending link DelayMeasurementMsg.
                               wwpLeosCfmExtDelayMsgRepeat 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.8 integer read-only
Used to make the Delay Measurement test a repeating test. Enumeration: 'enable': 1, 'disable': 2.
                               wwpLeosCfmExtDelayMsgRepeatCount 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.9 integer read-only
The repeat time in minutes for the Delay Measurement test. If zero is specified, the test runs continuously.
                               wwpLeosCfmExtDelayMsgDelayThreshold 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.41 integer read-only
Represents the fault Threshold for the average delay, specified in microseconds. A value of -1 disables the generatation of faults, 0 or greater will be compared to the average delay result of the test and a fault will be generated if the threshold is exceeded.
                               wwpLeosCfmExtDelayMsgJitterThreshold 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.42 integer read-only
Represents the fault threshold value for the average Jitter, specified in microseconds. A value of -1 disables the generation of faults, 0 or greater will be compared to the average jitter result of the test and a fault will be generated if the threshold is exceeded.
                               wwpLeosCfmExtDelayMsgAction 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.43 sendstate read-only
This object represents the action for the message (send, clear or cancel) If set to send(1) and if wwpLeosCfmExtDelayMsgTargetMacAddr is specified then loopbackMsg is sent to remote Mac. If set to send(1) and if wwpLeosCfmExtDelayMsgTargetMEPID is specified then loopbackMsg is sent to remote mepid. If set to clear(2) will clear mep statistics for given service and mepid. If set to cancel(3) and if wwpLeosCfmExtDelayMsgTargetMacAddr is specified then it will cancel sending Delay messages to remoteMac. If set to cancel(3) and if wwpLeosCfmExtDelayMsgTargetMEPID is specified then it will cancel sending Delay messages to remoteMEPID.
                               wwpLeosCfmExtDelayMsgMaxDelayThreshold 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.44 integer read-only
Represents the Threshold for the maximum Delay, specified in microseconds. A value of -1 disables the generatation of faults, 0 or greater will be compared to the maximum delay result of the test and a fault will be generated if the threshold is exceeded.
                               wwpLeosCfmExtDelayMsgMaxJitterThreshold 1.3.6.1.4.1.6141.2.60.35.1.21.12.1.1.45 integer read-only
Represents the threshold value for the maximum Jitter, specified in microseconds. A value of -1 disables the generatation of faults, 0 or greater will be compared to the maximum jitter result of the test and a fault will be generated if the threshold is exceeded.
                 wwpLeosCfmExtFrameLoss 1.3.6.1.4.1.6141.2.60.35.1.21.13
                       wwpLeosCfmExtFrameLossMsgTable 1.3.6.1.4.1.6141.2.60.35.1.21.13.1 no-access
The (conceptual) table listing the configuration parameters for the FrameLossMeasurementMsg.
                           wwpLeosCfmExtFrameLossMsgEntry 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmFrameLossMsgTable. To send, clear or cancel the message, the corresponding MsgAction needs to be specified. Individual objects in this table cannot be set. RowStatus is a read-only field. To send or cancel a message, the TargetMepID or the TargtetMacAddr objects need to be specified. Clear msgAction clears the counters for the message
                               wwpLeosCfmExtFrameLossMsgLocalMEPId 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.1 integer no-access
This object is used to specify the Local MEPID at teh source.
                               wwpLeosCfmExtFrameLossMsgTargetMEPID 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.2 unsigned32 read-only
This object is used to specify the MEPID. This object should only be set if wwpLeosCfmExtFrameLossMsgTargetMacAddr is not specified else error will be returned.
                               wwpLeosCfmExtFrameLossMsgTargetMacAddr 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.3 macaddress read-only
This object is used to specify the MacAddress to be used when sending link LoopbackMsg. This object should only be set if wwpLeosCfmExtFrameLossMsgTargetMEPID is not specified else error will be returned.
                               wwpLeosCfmExtFrameLossMsgCount 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.4 integer read-only
This object is used to specify the FrameLossMeasurementMsg count to be used when sending link FrameLossMeasurementMsg.
                               wwpLeosCfmExtFrameLossMsgPriority 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.5 integer read-only
This object is used to specify the FrameLossMeasurementMsg priority to be used when sending link FrameLossMeasurementMsg.
                               wwpLeosCfmExtFrameLossMsgRepeat 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.8 integer read-only
Used to make the Frame Loss Measurement test a repeating test. Enumeration: 'enable': 1, 'disable': 2.
                               wwpLeosCfmExtFrameLossMsgRepeatCount 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.9 integer read-only
The repeat time in minutes for the Frame Loss Measurement test. If zero is specified, the test runs continuously.
                               wwpLeosCfmExtFrameLossMsgFlnThreshold 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.10 integer read-only
The fault threshold for the Frame Loss Measurement test. A value of -1 disables the generate of faults, 0 or greater will be compared to the frame loss near result of the test and a fault will be generated if the threshold is exceeded.
                               wwpLeosCfmExtFrameLossMsgFlfThreshold 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.11 integer read-only
The fault threshold for the Frame Loss Measurement test. A value of -1 disables the generate of faults, 0 or greater will be compared to the frame loss far result of the test and a fault will be generated if the threshold is exceeded.
                               wwpLeosCfmExtFrameLossMsgAction 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.12 sendstate read-only
This object represents the action for the message (send, clear or cancel) This object represents the action for the message (send, clear or cancel) If set to send(1) and if wwpLeosCfmExtFrameLossMacAddr is specified then FrameLoss is sent to remote Mac. If set to send(1) and if wwpLeosCfmExtFrameLossMsgTargetMEPID is specified then FrameLossMsg is sent to remote mepid. If set to clear(2) will clear mep statistics for given service and mepid. If set to cancel(3) and if wwpLeosCfmExtFrameLossMsgTargetMacAddr is specified then it will cancel sending FrameLoss Messages to remoteMac. If set to cancel(3) and if wwpLeosCfmExtFrameLossMsgTargetMEPID is specified then it will cancel sending FrameLoss messages to remoteMEPID.
                               wwpLeosCfmExtFrameLossMsgSeqThreshold 1.3.6.1.4.1.6141.2.60.35.1.21.13.1.1.13 integer read-only
The sequence threshold for the Frame Loss Measurement test. A value of -1 disables the generate of faults, 0 or greater will be compared to the frame loss far result of the test and a fault will be generated if the threshold is exceeded.
                 wwpLeosCfmExtInterfaceStack 1.3.6.1.4.1.6141.2.60.35.1.21.14
                       wwpLeosCfmExtInterfaceStackTable 1.3.6.1.4.1.6141.2.60.35.1.21.14.1 no-access
The (conceptual) table listing the display parameters for the CFM port stack table.
                           wwpLeosCfmExtInterfaceStackEntry 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1 no-access
An entry (conceptual row) in the wwpLeosTceCfmPortStackTable.
                               wwpLeosCfmExtInterfaceStackServiceInstanceType 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.1 integer no-access
This object is used to specify the CFM port service type. Enumeration: 'ethVs': 1, 'vlan': 2, 'pbtTunnel': 3.
                               wwpLeosCfmExtInterfaceStackServiceInstanceIndex 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.2 unsigned32 no-access
A unique identifier for CFM domain entry.
                               wwpLeosCfmExtInterfaceStackInterfaceType 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.3 integer no-access
This object is used to specify the CFM interface type. Enumeration: 'pbtEncap': 2, 'none': 99, 'pbtDecap': 3, 'logicalPort': 1.
                               wwpLeosCfmExtInterfaceStackInterfaceIndex 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.4 unsigned32 no-access
This object is used to specify the CFM sub port index.
                               wwpLeosCfmExtInterfaceStackLevel 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.5 unsigned32 no-access
This object is used to specify the CFM interface level.
                               wwpLeosCfmExtInterfaceStackStackType 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.6 integer no-access
This object is used to specify the CFM interface type. Enumeration: 'mepUp': 1, 'mepDown': 2, 'mipUp': 3, 'mipDown': 4.
                               wwpLeosCfmExtInterfaceStackInterfaceName 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.7 displaystring read-only
This object is used to specify the CFM interface name.
                               wwpLeosCfmExtInterfaceStackServiceInstanceName 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.8 displaystring read-only
This object is used to specify the CFM interface name.
                               wwpLeosCfmExtInterfaceStackPortName 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.9 displaystring read-only
This object is used to specify the CFM interface port name.
                               wwpLeosCfmExtInterfaceStackOperState 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.10 integer read-only
This object is used to specify the CFM interface oper state. Enumeration: 'down': 2, 'up': 1.
                               wwpLeosCfmExtInterfaceStackVid 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.11 integer read-only
This object is used to specify the CFM interface vid.
                               wwpLeosCfmExtInterfaceStackPgid 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.12 unsigned32 read-only
This object is used to specify the CFM interface pgid.
                               wwpLeosCfmExtInterfaceStackMEPId 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.13 integer read-only
This object is used to specify the CFM interface mepid.
                               wwpLeosCfmExtInterfaceStackMacAddress 1.3.6.1.4.1.6141.2.60.35.1.21.14.1.1.14 macaddress read-only
This object is used to specify the CFM interface macaddress.
                 wwpLeosCfmExtMIP 1.3.6.1.4.1.6141.2.60.35.1.21.15
                       wwpLeosCfmExtMipTable 1.3.6.1.4.1.6141.2.60.35.1.21.15.1 no-access
The (conceptual) table listing the configuration parameters for the CFM Ext MIP Table. This table is not applicable if wwpLeosCfmServiceType is set to pbtTunnel. Any Get/Set/Walk will return error.
                           wwpLeosCfmExtMipEntry 1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmExtMipTable.
                               wwpLeosCfmExtMipVid 1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.1 integer no-access
This object is used as index in the table and is used to specify the VLAN service type for which intermediate maintenance points can be created.
                               wwpLeosCfmExtMipPort 1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.2 integer no-access
This object is used as index in the table and is used to specify the port.
                               wwpLeosCfmExtMipLevel 1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.3 integer no-access
The level attribute.
                               wwpLeosCfmExtMipStatus 1.3.6.1.4.1.6141.2.60.35.1.21.15.1.1.4 rowstatus read-only
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set it to 'destroy'.
                 wwpLeosCfmExtInterfaceMIP 1.3.6.1.4.1.6141.2.60.35.1.21.16
                       wwpLeosCfmExtInterfaceMipTable 1.3.6.1.4.1.6141.2.60.35.1.21.16.1 no-access
The (conceptual) table listing the configuration parameters for the CFM Ext MIP SI Table.
                           wwpLeosCfmExtInterfaceMipEntry 1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmExtInterfaceMipTable.
                               wwpLeosCfmExtInterfaceMipServiceInstanceType 1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.1 integer no-access
This object is used to specify the service instance type. Interpretation of wwpLeosCfmExtInterfaceMipServiceInstanceIndex depends on the value of this MIB object. Enumeration: 'ethVs': 1, 'vlan': 2, 'pbtTunnel': 3.
                               wwpLeosCfmExtInterfaceMipServiceInstanceIndex 1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.2 unsigned32 no-access
This object is used to specify the service instance index. Interpretation of this object depends on the value of wwpLeosCfmExtInterfaceMipServiceInstanceType.
                               wwpLeosCfmExtInterfaceMipInterfaceType 1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.3 integer no-access
This object is used to specify the CFM interface type. Enumeration: 'pbtEncap': 2, 'none': 0, 'pbtDecap': 3, 'portVlan': 1.
                               wwpLeosCfmExtInterfaceMipInterfaceIndex 1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.4 unsigned32 no-access
This object is used to specify an interface index. When the value of object wwpLeosCfmExtInterfaceMipInterfaceType is portVlan this obect refers to a port.
                               wwpLeosCfmExtInterfaceMipInterfaceSubIndex 1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.5 unsigned32 no-access
This object is used to specify a sub interface index. When the value of object wwpLeosCfmExtInterfaceMipInterfaceType is portVlan this obect refers to a vlan.
                               wwpLeosCfmExtInterfaceMipLevel 1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.6 integer no-access
The level attribute.
                               wwpLeosCfmExtInterfaceMipStatus 1.3.6.1.4.1.6141.2.60.35.1.21.16.1.1.7 rowstatus read-only
Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set it to 'destroy'.
                 wwpLeosCfmExtOamPort 1.3.6.1.4.1.6141.2.60.35.1.21.17
                       wwpLeosCfmExtOamPortTable 1.3.6.1.4.1.6141.2.60.35.1.21.17.1 no-access
The (conceptual) table listing if a port is OAM capable.
                           wwpLeosCfmExtOamPortEntry 1.3.6.1.4.1.6141.2.60.35.1.21.17.1.1 no-access
An entry (conceptual row) in the wwpLeosCfmExtOamPortTable.
                               wwpLeosCfmExtOamPortIndex 1.3.6.1.4.1.6141.2.60.35.1.21.17.1.1.1 integer32 no-access
Specifies the port index.
                               wwpLeosCfmExtOamPortSupported 1.3.6.1.4.1.6141.2.60.35.1.21.17.1.1.2 truthvalue read-only
Specifies if the port is OAM capable.
       wwpLeosCfmNotifMIBNotificationPrefix 1.3.6.1.4.1.6141.2.60.35.2
           wwpLeosCfmNotifMIBNotification 1.3.6.1.4.1.6141.2.60.35.2.0
               wwpLeosCfmFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.1
A notification is sent whenever the fault is detected.
               wwpLeosCfmPbtFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.2
A notification is sent whenever the fault is detected for a PBT tunnel. wwpLeosCfmServiceType will always be set to pbtTunnel.
               wwpLeosCfmDelayFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.3
A notification is sent whenever the fault is detected during a Delay Measurement test with a fault threshold.
               wwpLeosCfmJitterFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.4
A notification is sent whenever the fault is detected during a Delay Measurement test with a fault threshold.
               wwpLeosCfmFrameLossNearFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.5
A notification is sent whenever the fault is detected during a Frame Loss Measurement test with a fault threshold.
               wwpLeosCfmFrameLossFarFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.6
A notification is sent whenever the fault is detected during a Frame Loss Measurement test with a fault threshold.
               wwpLeosCfmExtDelayFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.7
A notification is sent whenever the fault is detected during a Delay Measurement test with a fault threshold.
               wwpLeosCfmExtJitterFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.8
A notification is sent whenever the fault is detected during a Delay Measurement test with a fault threshold.
               wwpLeosCfmExtFrameLossNearFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.9
A notification is sent whenever the fault is detected during a Frame Loss Measurement test with a fault threshold.
               wwpLeosCfmFaultTrapSet 1.3.6.1.4.1.6141.2.60.35.2.0.10
A notification is sent whenever the fault is detected.
               wwpLeosCfmFaultTrapClear 1.3.6.1.4.1.6141.2.60.35.2.0.11
A notification is sent whenever the fault is resolved and cleared.
               wwpLeosCfmDmmTrap 1.3.6.1.4.1.6141.2.60.35.2.0.12
A notification is sent whenever delay average goes above delay-threshold during a delay measurement test, also generated when delay average goes below threshold after going up as a clearing event. Same notification is generated whenever the average jitter goes above Jitter threshold during a delay measurement test and when the maximum delay and jitter go above the maximum delay and jitter thresholds respectively. Also generated when jitter average goes below jitter threshold after going up as a clearing event. When jitter event is generated, wwpLeosTceCfmDelayMsgDelayThreshold and wwpLeosTceCfmDelayMsgDelay varbind values are set to 0. Similarly when max delay event is generated wwpLeosTceCfmDelayMsgMaxJitter and wwpLeosTceCfmDelayMsgMaxJitterThreshold are set to 0 and vice versa
               wwpLeosCfmLmmTrap 1.3.6.1.4.1.6141.2.60.35.2.0.13
A notification is sent whenever FrameLoss Near average goes above FrameLoss Near threshold during a Frame Loss measurement test. Also generated when FrameLoss Near average goes below FrameLoss Near threshold after going up as a clearing event. Same notification is generated whenever FrameLoss Far Average goes above Frameloss Far threshold value during a Frame Loss measurement test. Also generated when Frameloss Far average goes below Frameloss Far threshold after going up as a clearing event. When FrameLoss Near event is generated wwpLeosTceCfmFrameLossMsgFrameLossFar and wwpLeosTceCfmFrameLossMsgFarLossThreshold varbind values are 0
               wwpLeosCfmExtFrameLossFarFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.20
A notification is sent whenever the fault is detected during a Frame Loss Measurement test with a fault threshold.
               wwpLeosCfmExtFaultTrapSet 1.3.6.1.4.1.6141.2.60.35.2.0.21
A notification is sent whenever the fault is detected.
               wwpLeosCfmExtFaultTrapClear 1.3.6.1.4.1.6141.2.60.35.2.0.22
A notification is sent whenever the fault is resolved and cleared.
               wwpLeosCfmBadSequenceFaultTrap 1.3.6.1.4.1.6141.2.60.35.2.0.23
A notification is sent whenever wwpLeosCfmExtMEPLMMBadSequence exceeds wwpLeosCfmExtFrameLossMsgSeqThreshold in a Frame Loss Measurement test.
               wwpLeosCfmBlockOppositeMEPSetTrap 1.3.6.1.4.1.6141.2.60.35.2.0.24
A notification sent whenever the number of frames blocked by the presence of a MEP of the opposite type exceeds the threshold during the sample window.
               wwpLeosCfmBlockOppositeMEPClearTrap 1.3.6.1.4.1.6141.2.60.35.2.0.25
A notification sent whenever the number of frames blocked by the presence of a MEP of the opposite type drops below the threshold during the sample window.
       wwpLeosCfmMIBConformance 1.3.6.1.4.1.6141.2.60.35.3
           wwpLeosCfmMIBCompliances 1.3.6.1.4.1.6141.2.60.35.3.1
           wwpLeosCfmMIBGroups 1.3.6.1.4.1.6141.2.60.35.3.2