USR-TRAP-MIB: View SNMP OID List / Download MIB

VENDOR: LOGIC INNOVATIONS


 Home MIB: USR-TRAP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, MDM-MIB, CHS-MIB, UDS1-MIB, PB-MIB, SNMPv2-TC, NMC-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 usr 1.3.6.1.4.1.429
           moduleInserted 1.3.6.1.4.1.4290.1
A card has been inserted into the hub.
           moduleRemoved 1.3.6.1.4.1.4290.2
A card has been removed from the hub.
           psuWarning 1.3.6.1.4.1.4290.3
Power supply voltage out of normal operating range.
           psuFailure 1.3.6.1.4.1.4290.4
Power supply failure.
           tempWarning 1.3.6.1.4.1.4290.5
Internal hub temperature out of normal operating range.
           fanFailure 1.3.6.1.4.1.4290.6
Hub cooling fan failed.
           entityWatchdogTimeout 1.3.6.1.4.1.4290.7
Watchdog timeout detected; indication of software failure.
           entityMgtBusFailure 1.3.6.1.4.1.4290.8
Management bus failure. Entity fails to respond to Managment Card.
           incomingConnectionEstablished 1.3.6.1.4.1.4290.9
Incoming connection established on modem.
           outgoingConnectionEstablished 1.3.6.1.4.1.4290.10
Outgoing connection established on modem.
           incomingConnectionTerminated 1.3.6.1.4.1.4290.11
Incoming connection terminated on modem.
           outgoingConnectionTerminated 1.3.6.1.4.1.4290.12
Outgoing connection terminated on modem.
           connectAttemptFailure 1.3.6.1.4.1.4290.13
Modem failed an attempt to connect with another modem.
           connectTimerExpired 1.3.6.1.4.1.4290.14
Modem's connection time limit expired. The connection was terminated.
           dteTransmitDataIdle 1.3.6.1.4.1.4290.15
The DTE connected to this modem has not transmitted anything to this modem for a period longer than its idle time threshold.
           dtrTrue 1.3.6.1.4.1.4290.16
The attached DTE is asserting the DTR signal in a 'true' condition.
           dtrFalse 1.3.6.1.4.1.4290.17
The DTE attached to this modem is asserting DTR in a 'false' condition.
           blerCountAtThreshold 1.3.6.1.4.1.4290.18
This modem's block error counter has exceeded the defined 'good' threshold during the current call.
           fallbackCountAtThreshold 1.3.6.1.4.1.4290.19
This modem's fallback counter has exceeded the normal 'good' threshold during the current call.
           noDialtone 1.3.6.1.4.1.4290.20
The modem has detected a lack of dial tone when it went off hook to dial.
           noLoopCurrent 1.3.6.1.4.1.4290.21
The modem has detected a lack of loop current on the phone line when it went off hook to dial.
           yellowAlarm 1.3.6.1.4.1.4290.22
A yellow alarm condition exists when the remote end of a DS1 is experiencing an 'out-of-frame' or 'OOF' condition.
           redAlarm 1.3.6.1.4.1.4290.23
The framing pattern has been lost on the DS1's receiver. This is also known as an 'out-of-frame' or 'OOF' condition.
           lossOfSignal 1.3.6.1.4.1.4290.24
The DS1 receiver has received 175 consecutive 0's. The DS1 is unable to recover a receive signal.
           alarmIndicationSignal 1.3.6.1.4.1.4290.25
The DS1 is receiving an all ones pattern. This is an indication that the remote end has lost its receive signal. This condition is also known as blue alarm.
           transmitTimingSourceSwitch 1.3.6.1.4.1.4290.26
The specified Dual T1 card has switched to an alternate timing source.
           modemResetByDte 1.3.6.1.4.1.4290.27
This specific trap is generated when modem is reset by dte.
           modemRingNoAnswer 1.3.6.1.4.1.4290.28
If the DTR is present and s0 register on the NAC is not equal to zero, then the Modem Ring No Answer event is generated.
           dteRingNoAnswer 1.3.6.1.4.1.4290.29
The DTE Ring No Answer event is generated when the DTR is not present and the s0 register on the NAC is not equal to zero.
           pktBusSessActive 1.3.6.1.4.1.4290.30
Packet bus session active trap.
           pktBusSessCongestion 1.3.6.1.4.1.4290.31
Packet bus session congestion trap.
           pktBusSessLost 1.3.6.1.4.1.4290.32
Packet bus session lost trap.
           pktBusSessInactive 1.3.6.1.4.1.4290.33
Packet bus session inactive trap.
           nacUserInterfaceReset 1.3.6.1.4.1.4290.34
The NAC has been RESET from the User Interface.
           gwWanPortOutOfService 1.3.6.1.4.1.4290.35
A gateway WAN port has changed from Link Active to Out of Service.
           gwWanPortLinkActive 1.3.6.1.4.1.4290.36
A gateway WAN port has changed from Out of Service to Link Active.
           dialOutLoginFail 1.3.6.1.4.1.4290.37
A dial out login security session has failed.
           dialInLoginFail 1.3.6.1.4.1.4290.38
A dial in login security session has failed.
           dialOutRestrictedNum 1.3.6.1.4.1.4290.39
A dial out security session has failed as a result of attempting to dial a restricted phone number.
           dialBackRestrictedNum 1.3.6.1.4.1.4290.40
A dial back security session has failed as a result of attempting to dial a restricted phone number.
           userBlacklisted 1.3.6.1.4.1.4290.41
A security user has reached their final failed login attempt number and is now being blacklisted.
           loginAttemptByBlacklistedUser 1.3.6.1.4.1.4290.42
A security login attempt by a currently blacklisted user has occurred.
           responseAttemptLimExceeded 1.3.6.1.4.1.4290.43
A security user has failed to issue a valid response to a particular security prompt before the configured limit.
           mdmLoginAttemptLimExceeded 1.3.6.1.4.1.4290.44
This signals a security session failure when the indicated user does not appear in the security user database.
           dialOutCallDuration 1.3.6.1.4.1.4290.45
A dial out call has ended.
           dialInCallDuration 1.3.6.1.4.1.4290.46
A dial in call has ended.
           pktBusSessError 1.3.6.1.4.1.4290.47
Packet bus session error trap.
           nmcArCustomTrap 1.3.6.1.4.1.4290.48
NMC AutoResponse SNMP TRAP
           acctSrvrLoss 1.3.6.1.4.1.4290.49
Contact lost with RADIUS accounting server.
           yellowAlarmClear 1.3.6.1.4.1.4290.50
A yellow alarm condition has been cleared.
           redAlarmClear 1.3.6.1.4.1.4290.51
The red alarm condition has been cleared.
           lossOfSignalClear 1.3.6.1.4.1.4290.52
The loss of signal condition has been cleared.
           alarmIndicationSignalClear 1.3.6.1.4.1.4290.53
The blue alarm condition has been cleared.
           ctIncomingConnectionEstablished 1.3.6.1.4.1.4290.54
Incoming connection established on modem.
           ctOutgoingConnectionEstablished 1.3.6.1.4.1.4290.55
Outgoing connection established on modem.
           ctIncomingConnectionTerminated 1.3.6.1.4.1.4290.56
Incoming connection terminated on modem.
           ctOutgoingConnectionTerminated 1.3.6.1.4.1.4290.57
Outgoing connection terminated on modem.
           ctConnectAttemptFailure 1.3.6.1.4.1.4290.58
Modem failed an attempt to connect with another modem.
           contCrcAlarm 1.3.6.1.4.1.4290.59
A continuous CRC error condition has occurred on the DS1.
           contCrcAlarmClear 1.3.6.1.4.1.4290.60
A continuous CRC error condition has cleared on the DS1.
           phyStateChng 1.3.6.1.4.1.4290.61
A physical state change has occurred on the DS1.