UNCDZ-MIB: View SNMP OID List / Download MIB
VENDOR: CAREL
Home | MIB: UNCDZ-MIB | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
carel | 1.3.6.1.4.1.9839 | |||
systm | 1.3.6.1.4.1.9839.1 | |||
agentRelease | 1.3.6.1.4.1.9839.1.1 | integer32 | read-only |
Release of the Agent. |
agentCode | 1.3.6.1.4.1.9839.1.2 | integer32 | read-only |
Code of the Agent. 2=pCOWeb. |
instruments | 1.3.6.1.4.1.9839.2 | |||
pCOWebInfo | 1.3.6.1.4.1.9839.2.0 | |||
pCOStatusgroup | 1.3.6.1.4.1.9839.2.0.10 | |||
pCOId1_Status | 1.3.6.1.4.1.9839.2.0.10.1 | integer32 | read-only |
Status of pCOId1. 0=Offline, 1=Init, 2=Online |
pCOErrorsNumbergroup | 1.3.6.1.4.1.9839.2.0.11 | |||
pCOId1_ErrorsNumber | 1.3.6.1.4.1.9839.2.0.11.1 | integer32 | read-only |
Number of Communication Errors from pCOId1 to pCOWeb. |
uncdz_MIB | 1.3.6.1.4.1.9839.2.1 |
This is the MIB module for the UNIFLAIR UNCDZ device. |
||
digitalObjects | 1.3.6.1.4.1.9839.2.1.1 | |||
vent_on | 1.3.6.1.4.1.9839.2.1.1.1 | integer32 | read-only |
System On (Fan) |
compressore1 | 1.3.6.1.4.1.9839.2.1.1.2 | integer32 | read-only |
Compressor 1 |
compressore2 | 1.3.6.1.4.1.9839.2.1.1.3 | integer32 | read-only |
Compressor 2 |
compressore3 | 1.3.6.1.4.1.9839.2.1.1.4 | integer32 | read-only |
Compressor 3 |
compressore4 | 1.3.6.1.4.1.9839.2.1.1.5 | integer32 | read-only |
Compressor 4 |
out_h1 | 1.3.6.1.4.1.9839.2.1.1.6 | integer32 | read-only |
Heating 1 |
out_h2 | 1.3.6.1.4.1.9839.2.1.1.7 | integer32 | read-only |
Heating 2 |
out_h3 | 1.3.6.1.4.1.9839.2.1.1.8 | integer32 | read-only |
Heating 3 |
gas_caldo_on | 1.3.6.1.4.1.9839.2.1.1.9 | integer32 | read-only |
Hot Gas Coil |
on_deum | 1.3.6.1.4.1.9839.2.1.1.10 | integer32 | read-only |
Dehumidification |
power | 1.3.6.1.4.1.9839.2.1.1.11 | integer32 | read-only |
Humidification |
mal_access | 1.3.6.1.4.1.9839.2.1.1.12 | integer32 | read-only |
Tampering Alarm |
mal_ata | 1.3.6.1.4.1.9839.2.1.1.13 | integer32 | read-only |
Alarm: Room High Temperature |
mal_bta | 1.3.6.1.4.1.9839.2.1.1.14 | integer32 | read-only |
Alarm: Room Low Temperature |
mal_aua | 1.3.6.1.4.1.9839.2.1.1.15 | integer32 | read-only |
Alarm: Room High Humidity |
mal_bua | 1.3.6.1.4.1.9839.2.1.1.16 | integer32 | read-only |
Alarm: Room Low Humidity |
mal_eap | 1.3.6.1.4.1.9839.2.1.1.17 | integer32 | read-only |
Alarm: Room High/Low Temp./Humid.(Ext. Devices) |
mal_filter | 1.3.6.1.4.1.9839.2.1.1.18 | integer32 | read-only |
Alarm: Clogged Filter |
mal_flood | 1.3.6.1.4.1.9839.2.1.1.19 | integer32 | read-only |
Alarm: Water Leakage Detected |
mal_flux | 1.3.6.1.4.1.9839.2.1.1.20 | integer32 | read-only |
Alarm: Loss of Air Flow |
mal_heater | 1.3.6.1.4.1.9839.2.1.1.21 | integer32 | read-only |
Alarm: Heater Overheating |
mal_hp1 | 1.3.6.1.4.1.9839.2.1.1.22 | integer32 | read-only |
Alarm: High Pressure 1 |
mal_hp2 | 1.3.6.1.4.1.9839.2.1.1.23 | integer32 | read-only |
Alarm: High Pressure 2 |
mal_lp1 | 1.3.6.1.4.1.9839.2.1.1.24 | integer32 | read-only |
Alarm: Low Pressure 1 |
mal_lp2 | 1.3.6.1.4.1.9839.2.1.1.25 | integer32 | read-only |
Alarm: Low Pressure 2 |
mal_phase | 1.3.6.1.4.1.9839.2.1.1.26 | integer32 | read-only |
Alarm: Wrong phase sequence |
mal_smoke | 1.3.6.1.4.1.9839.2.1.1.27 | integer32 | read-only |
Alarm: SMOKE-FIRE DETECTED |
mal_lan | 1.3.6.1.4.1.9839.2.1.1.28 | integer32 | read-only |
Alarm: Interrupted LAN |
mal_hcurr | 1.3.6.1.4.1.9839.2.1.1.29 | integer32 | read-only |
Humidifier Alarm: High Current |
mal_nopower | 1.3.6.1.4.1.9839.2.1.1.30 | integer32 | read-only |
Humidifier Alarm: Power Loss |
mal_nowater | 1.3.6.1.4.1.9839.2.1.1.31 | integer32 | read-only |
Humidifier Alarm: Water Loss |
mal_cw_dh | 1.3.6.1.4.1.9839.2.1.1.32 | integer32 | read-only |
Alarm: Chilled Water Temp. too High for Dehumidification |
mal_tc_cw | 1.3.6.1.4.1.9839.2.1.1.33 | integer32 | read-only |
Alarm: CW Valve Failure or Water Flow too Low |
mal_wflow | 1.3.6.1.4.1.9839.2.1.1.34 | integer32 | read-only |
Alarm: Loss of Water flow |
mal_wht | 1.3.6.1.4.1.9839.2.1.1.35 | integer32 | read-only |
Alarm: High chilled water temp. |
mal_sonda_ta | 1.3.6.1.4.1.9839.2.1.1.36 | integer32 | read-only |
Alarm: Room air Sensor Failure/Disconnected |
mal_sonda_tac | 1.3.6.1.4.1.9839.2.1.1.37 | integer32 | read-only |
Alarm: Hot water Sensor Failure/Disconnected |
mal_sonda_tc | 1.3.6.1.4.1.9839.2.1.1.38 | integer32 | read-only |
Alarm: Condensing water Sensor Failure/Disconnect. |
mal_sonda_te | 1.3.6.1.4.1.9839.2.1.1.39 | integer32 | read-only |
Alarm: Outdoor temp. Sensor Failure/Disconnected |
mal_sonda_tm | 1.3.6.1.4.1.9839.2.1.1.40 | integer32 | read-only |
Alarm: Delivery temp. Sensor Failure/Disconnected |
mal_sonda_ua | 1.3.6.1.4.1.9839.2.1.1.41 | integer32 | read-only |
Alarm: Rel. Humidity Sensor Failure/Disconnected |
mal_ore_compr1 | 1.3.6.1.4.1.9839.2.1.1.42 | integer32 | read-only |
Service Alarm: Compressor 1 hour counter threshold |
mal_ore_compr2 | 1.3.6.1.4.1.9839.2.1.1.43 | integer32 | read-only |
Service Alarm: Compressor 2 hour counter threshold |
mal_ore_compr3 | 1.3.6.1.4.1.9839.2.1.1.44 | integer32 | read-only |
Service Alarm: Compressor 3 hour counter threshold |
mal_ore_compr4 | 1.3.6.1.4.1.9839.2.1.1.45 | integer32 | read-only |
Service Alarm: Compressor 4 hour counter threshold |
mal_ore_filtro | 1.3.6.1.4.1.9839.2.1.1.46 | integer32 | read-only |
Service Alarm: Air Filter hour counter threshold |
mal_ore_risc1 | 1.3.6.1.4.1.9839.2.1.1.47 | integer32 | read-only |
Service Alarm: Heater 1 hour counter threshold |
mal_ore_risc2 | 1.3.6.1.4.1.9839.2.1.1.48 | integer32 | read-only |
Service Alarm: Heater 2 hour counter threshold |
mal_ore_umid | 1.3.6.1.4.1.9839.2.1.1.49 | integer32 | read-only |
Service Alarm: Humidifier hour counter threshold |
mal_ore_unit | 1.3.6.1.4.1.9839.2.1.1.50 | integer32 | read-only |
Service Alarm: Unit hour counter threshold |
glb_al | 1.3.6.1.4.1.9839.2.1.1.51 | integer32 | read-only |
General Alarm |
or_al_2lev | 1.3.6.1.4.1.9839.2.1.1.52 | integer32 | read-only |
2nd Level Alarm |
range_t_ext | 1.3.6.1.4.1.9839.2.1.1.53 | integer32 | read-only |
Outdoor Temp. Sensor Fitted |
range_t_circ | 1.3.6.1.4.1.9839.2.1.1.54 | integer32 | read-only |
Closed Circuit (or Chilled) Water Temperature Sensor Fitted |
range_t_man | 1.3.6.1.4.1.9839.2.1.1.55 | integer32 | read-only |
Delivery Temp. Sensor Fitted |
range_t_ac | 1.3.6.1.4.1.9839.2.1.1.56 | integer32 | read-only |
Hot water temp. Sensor Fitted |
umid_al | 1.3.6.1.4.1.9839.2.1.1.57 | integer32 | read-only |
Humidifier general alarm |
range_u_amb | 1.3.6.1.4.1.9839.2.1.1.58 | integer32 | read-only |
Relative Humidity Sensor Fitted |
k_syson | 1.3.6.1.4.1.9839.2.1.1.60 | integer32 | read-write |
Unit Remote Switch-On/Off Control |
xs_res_al | 1.3.6.1.4.1.9839.2.1.1.61 | integer32 | read-write |
Buzzer and Alarm Remote Reset Control |
sleep_mode | 1.3.6.1.4.1.9839.2.1.1.63 | integer32 | read-write |
Set Back Mode (Sleep Mode) |
test_sm | 1.3.6.1.4.1.9839.2.1.1.64 | integer32 | read-write |
Set Back mode: Cyclical Start of Fan |
ab_mediath | 1.3.6.1.4.1.9839.2.1.1.65 | integer32 | read-write |
Usage of T+ H Values: Local (0) / Mean (1) |
ustdby1_2 | 1.3.6.1.4.1.9839.2.1.1.66 | integer32 | read-write |
No. Of Stand-by Units: one (0) / two (1) |
emerg | 1.3.6.1.4.1.9839.2.1.1.67 | integer32 | read-only |
Unit in Emergency operation |
analogObjects | 1.3.6.1.4.1.9839.2.1.2 | |||
temp_amb | 1.3.6.1.4.1.9839.2.1.2.1 | integer32 | read-only |
Room Temperature |
temp_ext | 1.3.6.1.4.1.9839.2.1.2.2 | integer32 | read-only |
Outdoor Temperature |
temp_mand | 1.3.6.1.4.1.9839.2.1.2.3 | integer32 | read-only |
Delivery Air Temperature |
temp_circ | 1.3.6.1.4.1.9839.2.1.2.4 | integer32 | read-only |
Closed Circuit (or Chilled) Water Temperature |
temp_ac | 1.3.6.1.4.1.9839.2.1.2.5 | integer32 | read-only |
Hot Water Temperature |
umid_amb | 1.3.6.1.4.1.9839.2.1.2.6 | integer32 | read-only |
Room Relative Humidity |
t_set | 1.3.6.1.4.1.9839.2.1.2.7 | integer32 | read-write |
Cooling Set Point |
t_diff | 1.3.6.1.4.1.9839.2.1.2.8 | integer32 | read-write |
Cooling Prop.Band |
t_set_c | 1.3.6.1.4.1.9839.2.1.2.9 | integer32 | read-write |
Heating Set point |
t_diff_c | 1.3.6.1.4.1.9839.2.1.2.10 | integer32 | read-write |
Heating Prop.Band |
ht_set | 1.3.6.1.4.1.9839.2.1.2.11 | integer32 | read-write |
Room High Temp. Alarm Threshold |
lt_set | 1.3.6.1.4.1.9839.2.1.2.12 | integer32 | read-write |
Room Low Temp. Alarm Threshold |
t_set_sm | 1.3.6.1.4.1.9839.2.1.2.13 | integer32 | read-write |
Setback Mode: Cooling Set Point |
t_set_c_sm | 1.3.6.1.4.1.9839.2.1.2.14 | integer32 | read-write |
Setback Mode: Heating Set Point |
t_cw_dh | 1.3.6.1.4.1.9839.2.1.2.15 | integer32 | read-write |
CW Set Point to Start Dehumidification Cycle |
htset_cw | 1.3.6.1.4.1.9839.2.1.2.16 | integer32 | read-write |
CW High Temperature Alarm Threshold |
t_set_cw | 1.3.6.1.4.1.9839.2.1.2.17 | integer32 | read-write |
CW Set Point to Start CW Operating Mode (TC only) |
t_rc_es | 1.3.6.1.4.1.9839.2.1.2.18 | integer32 | read-write |
Rad-cooler Set Point in E.S. Mode (ES Only) |
t_rc_est | 1.3.6.1.4.1.9839.2.1.2.19 | integer32 | read-write |
Rad-cooler Set Point in DX Mode (ES Only) |
rampa_valv | 1.3.6.1.4.1.9839.2.1.2.20 | integer32 | read-only |
0-10V Ramp 1 Value (CW Valve Ramp) |
anaout2 | 1.3.6.1.4.1.9839.2.1.2.21 | integer32 | read-only |
0-10V Ramp 2 Value (HW Valve/Rad Cooler Ramp) |
steam_production | 1.3.6.1.4.1.9839.2.1.2.22 | integer32 | read-only |
Humidifier: steam capacity |
t_set_lm | 1.3.6.1.4.1.9839.2.1.2.23 | integer32 | read-write |
Delivery Air Temperature Limit Set Point |
delta_lm | 1.3.6.1.4.1.9839.2.1.2.24 | integer32 | read-write |
T+H Values: Mean/Local Diff. (aut. Changeover) |
integerObjects | 1.3.6.1.4.1.9839.2.1.3 | |||
ore_filtro | 1.3.6.1.4.1.9839.2.1.3.1 | integer32 | read-only |
Air Filter Working Houres |
ore_unit | 1.3.6.1.4.1.9839.2.1.3.2 | integer32 | read-only |
Unit Working Houres |
ore_compr1 | 1.3.6.1.4.1.9839.2.1.3.3 | integer32 | read-only |
Compressor 1 Working Houres |
ore_compr2 | 1.3.6.1.4.1.9839.2.1.3.4 | integer32 | read-only |
Compressor 2 Working Houres |
ore_compr3 | 1.3.6.1.4.1.9839.2.1.3.5 | integer32 | read-only |
Compressor 3 Working Houres |
ore_compr4 | 1.3.6.1.4.1.9839.2.1.3.6 | integer32 | read-only |
Compressor 4 Working Houres |
ore_heat1 | 1.3.6.1.4.1.9839.2.1.3.7 | integer32 | read-only |
Heater 1 Working Houres |
ore_heat2 | 1.3.6.1.4.1.9839.2.1.3.8 | integer32 | read-only |
Heater 2 Working Houres |
ore_umid | 1.3.6.1.4.1.9839.2.1.3.9 | integer32 | read-only |
Humidifier Working Houres |
hdiff | 1.3.6.1.4.1.9839.2.1.3.12 | integer32 | read-write |
Dehumidification Proportional Band |
hu_diff | 1.3.6.1.4.1.9839.2.1.3.13 | integer32 | read-write |
Humidification Proportional Band |
hh_set | 1.3.6.1.4.1.9839.2.1.3.14 | integer32 | read-write |
High Relative Humidity Alarm Threshold |
lh_set | 1.3.6.1.4.1.9839.2.1.3.15 | integer32 | read-write |
Low Relative Humidity Alarm Threshold |
hset | 1.3.6.1.4.1.9839.2.1.3.16 | integer32 | read-write |
Dehumidification Set Point |
hset_sm | 1.3.6.1.4.1.9839.2.1.3.17 | integer32 | read-write |
Setback Mode: Dehumidification Set Point |
hu_set | 1.3.6.1.4.1.9839.2.1.3.18 | integer32 | read-write |
Humidification Set Point |
hu_set_sm | 1.3.6.1.4.1.9839.2.1.3.19 | integer32 | read-write |
Setback Mode: Humidification Set Point |
restart_delay | 1.3.6.1.4.1.9839.2.1.3.20 | integer32 | read-write |
Restart Delay |
regul_delay | 1.3.6.1.4.1.9839.2.1.3.21 | integer32 | read-write |
Regulation Start Transitory |
time_lowp | 1.3.6.1.4.1.9839.2.1.3.22 | integer32 | read-write |
Low Pressure Delay |
alarm_delay | 1.3.6.1.4.1.9839.2.1.3.23 | integer32 | read-write |
Room T+H Alarm Delay |
exc_time | 1.3.6.1.4.1.9839.2.1.3.24 | integer32 | read-write |
Anti-Hunting Constant of Room Regulation |
t_std_by | 1.3.6.1.4.1.9839.2.1.3.25 | integer32 | read-write |
Stand-by Cycle Base Time |
lan_unit | 1.3.6.1.4.1.9839.2.1.3.27 | integer32 | read-write |
Total of units connected in LAN |
ciclo_sm | 1.3.6.1.4.1.9839.2.1.3.28 | integer32 | read-write |
Set Back Mode: Fan Cyclical Start Interval |