UBQS-MPLS-LDP-MIB: View SNMP OID List / Download MIB

VENDOR: PREMIER NETWORK CO., LTD


 Home MIB: UBQS-MPLS-LDP-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, MPLS-TC-STD-MIB, INET-ADDRESS-MIB, UBQS-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ubiLdpMIB 1.3.6.1.4.1.7800.100.24.3
     ubiLdpMIBNotificationPrefix 1.3.6.1.4.1.7800.100.24.3.0
     ubiLdpMIBObjects 1.3.6.1.4.1.7800.100.24.3.1
         ubiLdpConfig 1.3.6.1.4.1.7800.100.24.3.1.1
             ubiLdpEnable 1.3.6.1.4.1.7800.100.24.3.1.1.1 truthvalue read-write
Set the global attribute of LDP whether the LDP performs the operations. If this attribute is not set, then the LDP does not send any kinds of packets.
             ubiLdpRouterId 1.3.6.1.4.1.7800.100.24.3.1.1.2 ipaddress read-write
This entry set the router-id to the supplied IP address. The router uses this address to generate the LDP-ID. If you does not set this feild and the ubiLdpEnable attribute is enabled, then LDP Module automatically generate the LDP-ID. The algorithm for making ID is not covered in this description. please refer to RFC 5036 2.2.2. LDP Identifiers.
             ubiLdpFailoverCfmEnable 1.3.6.1.4.1.7800.100.24.3.1.1.3 truthvalue read-write
set the attribute of Connectivity Fault Management(CFM) in LDP. If you set this field, LDP creates the socket (AF_CFM) to detect whether the link associated with the peer is UP or DOWN. After set this attribute, You MUST enable the property for CFM in the interface which you want to check the connectivity.
             ubiLdpTargetedPeerHelloReceiptEnable 1.3.6.1.4.1.7800.100.24.3.1.1.4 truthvalue read-write
Enable whether LDP accepts the packets from the targeted peer and cerate the instance for peer. If you want to configure the targeted-peer in network, then MUST enable this field at first.
             ubiLdpAcUpSignalEnable 1.3.6.1.4.1.7800.100.24.3.1.1.5 truthvalue read-write
Enable the field to notify the interface of binded vpls to the neighbors for VPLS. If this is reset, then does not quickly send the signal to neighbors.
             ubiLdpExceedInitSessionNotiEnable 1.3.6.1.4.1.7800.100.24.3.1.1.6 truthvalue read-write
             ubiLdpPathVectorLimitMismatchNotiEnable 1.3.6.1.4.1.7800.100.24.3.1.1.7 truthvalue read-write
             ubiLdpLdpSessionUpDownNotiEnable 1.3.6.1.4.1.7800.100.24.3.1.1.8 truthvalue read-write
         ubiLdpInterfaceTable 1.3.6.1.4.1.7800.100.24.3.1.2 no-access
This table specifies the LDP information for each interface.
             ubiLdpInterfaceEntry 1.3.6.1.4.1.7800.100.24.3.1.2.1 no-access
A row in this table represents an LDP enable/disable status for each interface.
                 ubiLdpIfEnable 1.3.6.1.4.1.7800.100.24.3.1.2.1.1 integer read-write
If this object is set to ipv4, ipv6, or both, then it is possible to transmit Hello packet through a specified interface. And LDP adjacencies and session can be created. Enumeration: 'both': 3, 'none': 0, 'ipv4': 1, 'ipv6': 2.
     ubiLdpMIBConformance 1.3.6.1.4.1.7800.100.24.3.2
         ubiLdpMIBCompliances 1.3.6.1.4.1.7800.100.24.3.2.1
             ubiLdpMIBCompliance 1.3.6.1.4.1.7800.100.24.3.2.1.1
The compliance statement for entities which implement the UBQS-MPLS-LDP-MIB
         ubiLdpMIBGroups 1.3.6.1.4.1.7800.100.24.3.2.2
             ubiLdpMIBGroup 1.3.6.1.4.1.7800.100.24.3.2.2.1
A collection of objects containing information about the LDP information.