SDH-ETS-MIB: View SNMP OID List / Download MIB

VENDOR: SAGEMCOM SAS


 Home MIB: SDH-ETS-MIB
Download as:   
SNMPv2-CONF, EQUIPMENT-MIB, SAGEM-DR-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sdhEts 1.3.6.1.4.1.1038.110
The MIB module defines SDH transmition part of an equipment This MIB use the logical model defined in ETSI ETS 300 304. ETS 300 304 (February 1997) defines the SDH information model for the Network Element. This MIB refers to SHELF-MIB for the definition of the Board that supports the interface. This MIB is refered by XCON-MIB that uses the definition of termination point to create cross connection. This MIB also define configuration of the different SDH blocs such as alarm monitoring and severity and give the current status of the termination point.
         spiTTP 1.3.6.1.4.1.1038.110.10
               spiTTPNumber 1.3.6.1.4.1.1038.110.10.1 integer read-only
Number of synchronous physical interface in equipment = number of element in spiTTPTable
               spiTTPTable 1.3.6.1.4.1.1038.110.10.2 no-access
List of synchronous physical interface in equipment.
                   spiTTPEntry 1.3.6.1.4.1.1038.110.10.2.1 no-access
A particular synchronous physical interface of the equipment.
                       spiTTPIndex 1.3.6.1.4.1.1038.110.10.2.1.1 integer read-only
A unique value which identify a particular synchronous physical interface. The value of this index is a constant value assigned to an entry at equipment design time. It is usualy related to harware. Exemple: For ADR155c equipement index are 1,64,127,190 for STM1 interfaces. For ADR2500c equipement index are: 1,1009,2017,3025,4033,5041,6049,7057 for 8 STM16 or 8 STM4, 1,253,505,757 1009,1261,1513,1765 | 2017,2269,2521,2773 3025,3277,3529,3781 | --> for 8 (4*STM1) 4033,4285,4537,4789 5041,5293,5545,5797 | 6049,6301,6553,6805 7057,7309,7561,7813 |
                       spiTTPStmLevel 1.3.6.1.4.1.1038.110.10.2.1.2 stmlevel read-only
The STM-n level of the interface.
                       spiTTPType 1.3.6.1.4.1.1038.110.10.2.1.3 spittptype read-only
The kind of the interface: electrical or optical
                       spiTTPName 1.3.6.1.4.1.1038.110.10.2.1.4 displaystring read-write
A text string which identifies the particular entry among the synchronous physical interface entries.
                       spiTTPBoardIndex 1.3.6.1.4.1.1038.110.10.2.1.5 integer read-only
Index of the Board that supports the physical acces of this interface. This index refers to another MIB that defines the board
                       spiTTPBoardAcces 1.3.6.1.4.1.1038.110.10.2.1.6 integer read-only
Friendly Index of the physical acces on the Board that supports the interface
                       spiTTPMonitor 1.3.6.1.4.1.1038.110.10.2.1.7 sagemboolean read-write
When the value of this field is set to false, the failure detection is stopped for this synchronous physical interface.
                       spiTTPFailure 1.3.6.1.4.1.1038.110.10.2.1.8 spittpfailure read-only
Active failures on synchronous physical interface
                       spiTTPSeverity 1.3.6.1.4.1.1038.110.10.2.1.9 severity read-only
Severity associed with active failure for synchronous physical interface.
                       spiTTPLoopback 1.3.6.1.4.1.1038.110.10.2.1.10 loopback read-write
This field gives the active loopback status on the synchronous physical interface. When its value is `line' the data flow recieved from the port side is sent back to the line. When its value is `equipment' the data flow recieved form equipment side is send back. The field can be set to a particular loopback value, even if there no garantee that the loopback is really done. The real loopback status of the interface must be checked in the response. The loopback can be cleared by the equipment when it cannot remain for any reason.
                       spiTTPLos 1.3.6.1.4.1.1038.110.10.2.1.20 severity read-write
Severity associed with Loss Of Signal failure for synchronous physical interface.
                       spiTTPTf 1.3.6.1.4.1.1038.110.10.2.1.21 severity read-write
Severity associed with Tranmit Fail failure for synchronous physical interface.
         rsTTP 1.3.6.1.4.1.1038.110.20
               rsTTPTable 1.3.6.1.4.1.1038.110.20.2 no-access
List of regenerator section terminaison in equipment.
                   rsTTPEntry 1.3.6.1.4.1.1038.110.20.2.1 no-access
A particular regenerator section terminaison of the equipment.
                       rsTTPIndex 1.3.6.1.4.1.1038.110.20.2.1.1 integer read-only
A unique value which identify a particular synchronous physical interface. The value of this index is always the same as spiTTPIndex.
                       rsTTPMonitor 1.3.6.1.4.1.1038.110.20.2.1.2 sagemboolean read-write
When the value of this field is set to false, the failure detection is stopped for this regenerator section terminaison.
                       rsTTPName 1.3.6.1.4.1.1038.110.20.2.1.3 displaystring read-write
A text string which identifies the particular entry among the regenerator section terminaison entries.
                       rsTTPFailure 1.3.6.1.4.1.1038.110.20.2.1.4 rsttpfailure read-only
Active failures on regenerator section terminaison
                       rsTTPSeverity 1.3.6.1.4.1.1038.110.20.2.1.5 severity read-only
Severity associed active Failure for regenerator section terminaison.
                       rsTTPEOWMode 1.3.6.1.4.1.1038.110.20.2.1.8 eowmode read-only
Mode used for EOW: Codir or contradir Master
                       rsTTPE1SrcPointer 1.3.6.1.4.1.1038.110.20.2.1.9 integer read-only
A reference to the object which sends the data flow to E1 RSOH byte (index in X21 table) Usualy E1 carries X21 EOW (engineering order wire) data and thus the pointer s value reference a mib X21 port entry. Zero indicates not used
                       rsTTPF1SrcPointer 1.3.6.1.4.1.1038.110.20.2.1.10 integer read-only
A reference to the object which sends the data flow to F1 RSOH byte.Zero indicates not used
                       rsTTPSesThreshold 1.3.6.1.4.1.1038.110.20.2.1.11 integer read-only
The number of errors above which the second is declared severely errored for this interface/function. This value apply for near and far interface/function
                       rsTTPEOWByteLine 1.3.6.1.4.1.1038.110.20.2.1.12 integer read-write
The line determines the SOH byte selected for Engineering Order Wire: SOH starts with 3 lines of RSOH (1,2,3) and finish with 5 lines of MSOH (5,6,7,8,9) E1 is on line 2 column 4. Zero indicates EOW not used, value different from 2 means EOW not on E1
                       rsTTPEOWByteColumn 1.3.6.1.4.1.1038.110.20.2.1.13 integer read-write
The column determines the SOH byte selected for Engineering Order Wire: SOH is composed of Col [1,9] E1 is on line 2 column 4. Zero indicates EOW not used, value different from 4 means EOW not on E1
                       rsTTPLof 1.3.6.1.4.1.1038.110.20.2.1.20 severity read-write
Severity associed with Loss Of Frame failure for regenerator section terminaison.
         rsCTP 1.3.6.1.4.1.1038.110.25
         msTTP 1.3.6.1.4.1.1038.110.30
               msTTPTable 1.3.6.1.4.1.1038.110.30.2 no-access
List of multiplex section terminaison in equipment.
                   msTTPEntry 1.3.6.1.4.1.1038.110.30.2.1 no-access
A particular multiplex section terminaison of the equipment.
                       msTTPIndex 1.3.6.1.4.1.1038.110.30.2.1.1 integer read-only
A unique value which identify a particular synchronous physical interface. The value of this index is always the same as spiTTPIndex
                       msTTPProtectionType 1.3.6.1.4.1.1038.110.30.2.1.2 protectiontype read-write
The value of this field indicates the kind of wanted multiplex section protection. The default value is NONE. if value is changed in msp(1) or msSPRing(2) then (if it's possible) an entry is created respectivelly in mspTable or msSPRingTable. But these tables have to be completed to obtain a configured protection. If value is changed in None(0)then the associated entry in mspTable or msSPRingTable is deleted (if it's possible).
                       msTTPMonitor 1.3.6.1.4.1.1038.110.30.2.1.3 sagemboolean read-write
When the value of this field is set to false, the failure detection is stopped for this multiplex section terminaison.
                       msTTPName 1.3.6.1.4.1.1038.110.30.2.1.4 displaystring read-write
A text string which identifies the particular entry among the multiplex section terminaison entries.
                       msTTPFailure 1.3.6.1.4.1.1038.110.30.2.1.5 msttpfailure read-only
Active failures on multiplex section terminaison
                       msTTPSeverity 1.3.6.1.4.1.1038.110.30.2.1.6 severity read-only
Severity associed with active failures on multiplex section terminaison.
                       msTTPEOWMode 1.3.6.1.4.1.1038.110.30.2.1.7 eowmode read-only
Mode used for EOW: Codir or contradir Master
                       msTTPE2SrcPointer 1.3.6.1.4.1.1038.110.30.2.1.8 integer read-only
A reference to the object which sends the data flow to E2 MSOH byte. Usualy E2 carries X21 EOW (engineering order wire) data. The reference is an index in X21 table.Zero indicates not used
                       msTTPEOWByteLine 1.3.6.1.4.1.1038.110.30.2.1.9 integer read-write
The line determines the SOH byte selected for Engineering Order Wire: SOH starts with 3 lines of RSOH (1,2,3) and finish with 5 lines of MSOH (5,6,7,8,9) E2 is on line 9 column 7. Zero indicates not used, value different from 9 means EOW not on E2
                       msTTPEOWByteColumn 1.3.6.1.4.1.1038.110.30.2.1.10 integer read-write
The column determines the SOH byte selected for Engineering Order Wire: SOH is composed of Col [1,9] E2 is on line 9 column 7. Zero indicates EOW not used, value different from 7 means EOW not on E2
                       msTTPMonEber 1.3.6.1.4.1.1038.110.30.2.1.11 sagemboolean read-write
If the value of this field is true, the eber is monitored and is used as MSP and SETS criterium. If this defect is detected, an ais signal is send downstream and rdi upstream.
                       msTTPSdThreshold 1.3.6.1.4.1.1038.110.30.2.1.12 integer read-write
A Signal Degrade failure is declared if the error block rate is greater than 1E(-mstSdThreshold). The Signal Degrade failure desapeared when the error block rate is less than 1E(1 - mstSdThreshold).
                       msTTPSesThreshold 1.3.6.1.4.1.1038.110.30.2.1.13 integer read-only
The number of errors above which the second is declared severely errored for this interface/function. This value apply for near and far interface/function
                       msTTPEber 1.3.6.1.4.1.1038.110.30.2.1.20 severity read-write
Severity associed with Excecive Bit Error Rate failure for multiplex section terminaison.
                       msTTPSd 1.3.6.1.4.1.1038.110.30.2.1.21 severity read-write
Severity associed with Signal Degrade failure for multiplex section terminaison.
                       msTTPRdi 1.3.6.1.4.1.1038.110.30.2.1.22 severity read-write
Severity associed with Remote Defect Indication failure for multiplex section terminaison.
         msCTP 1.3.6.1.4.1.1038.110.35
         msa 1.3.6.1.4.1.1038.110.60
               msaTable 1.3.6.1.4.1.1038.110.60.2 no-access
List of multiplex section adaptation in equipment.
                   msaEntry 1.3.6.1.4.1.1038.110.60.2.1 no-access
A particular multiplex section adaptation of the equipment.
                       msaIndex 1.3.6.1.4.1.1038.110.60.2.1.1 integer read-only
Index of a particular entry among the multiplex section adaptation entries.
                       msaSTMLevel 1.3.6.1.4.1.1038.110.60.2.1.2 stmlevel read-only
The STM-n level of the multiplex section adaptation.
                       msaSinkType 1.3.6.1.4.1.1038.110.60.2.1.3 msasinktype read-only
Type of msa sinkPointer: msa or mst
                       msaSinkPointer 1.3.6.1.4.1.1038.110.60.2.1.4 integer read-only
A reference to the object which sends the data flow to this function on synchronous port interface side. In most equipments, this value cannot be changed and points to the MST it is hard wired with.
                       msaName 1.3.6.1.4.1.1038.110.60.2.1.5 displaystring read-write
A text string which identifies the particular entry among the multiplex section adaptation entries.
                       msaSrc1Type 1.3.6.1.4.1.1038.110.60.2.1.6 msasrctype read-only
Type of msa srcPointer: msa or vc4
                       msaSrc2Type 1.3.6.1.4.1.1038.110.60.2.1.7 msasrctype read-only
Type of msa srcPointer: msa or vc4
                       msaSrc3Type 1.3.6.1.4.1.1038.110.60.2.1.8 msasrctype read-only
Type of msa srcPointer: msa or vc4
                       msaSrc4Type 1.3.6.1.4.1.1038.110.60.2.1.9 msasrctype read-only
Type of msa srcPointer: msa or vc4
                       msaSrc1Pointer 1.3.6.1.4.1.1038.110.60.2.1.10 integer read-only
Table index of the object which sends the data flow to this function on equipment side. For STM16: 4 pseudo STM4 (group of 4STM1) identified by their index in msaTable. Theses indexes must be differents to thoses used by the MST Table. For STM4: 4 VC4 identified by their index in vc4Table For STM1: 1 VC4 identified by its index in vc4Table
                       msaSrc2Pointer 1.3.6.1.4.1.1038.110.60.2.1.11 integer read-only
A reference to the object which sends the data flow to this function on equipment side. In most equipments, this value cannot be changed and points to the VC4 function it is hard wired with.
                       msaSrc3Pointer 1.3.6.1.4.1.1038.110.60.2.1.12 integer read-only
A reference to the object which sends the data flow to this function on equipment side. In most equipments, this value cannot be changed and points to the VC4 function it is hard wired with.
                       msaSrc4Pointer 1.3.6.1.4.1.1038.110.60.2.1.13 integer read-only
A reference to the object which sends the data flow to this function on equipment side. In most equipments, this value cannot be changed and points to the VC4 function it is hard wired with.
         au4CTP 1.3.6.1.4.1.1038.110.70
               au4CTPNumber 1.3.6.1.4.1.1038.110.70.1 integer read-only
Number of administrative unit order 4 in equipment.
               au4CTPTable 1.3.6.1.4.1.1038.110.70.2 no-access
List of administrative unit order 4 in equipment which are availables for new connection or used in connection. In that case, an indication on the connection type is set into the au4CTPCnxType Variable. All au4 CTP, which are made up of lower connection level (tu3 or tu12), are set to 'used' value with 'tu' type connection indication .
                   au4CTPEntry 1.3.6.1.4.1.1038.110.70.2.1 no-access
A particular administrative unit order 4 of the equipment.
                       au4CTPIndex 1.3.6.1.4.1.1038.110.70.2.1.1 integer read-only
A unique value which identify a particular administrative unit order 4. The value of index is a constant assigned to an entry at equipment design time. It is usualy related to harware.
                       au4CTPStatus 1.3.6.1.4.1.1038.110.70.2.1.2 ctpstatus read-only
au4 connection point Status: free or used. The 'free' value is used when there is no connection with this output CTP
                       au4CTPCnxType 1.3.6.1.4.1.1038.110.70.2.1.3 au4ctpcnxtype read-only
au4 connection Type: none, au4, au4-4c,au4-16c,tu. The 'none' value is used when there is no connection with this output CTP
                       au4CTPName 1.3.6.1.4.1.1038.110.70.2.1.4 displaystring read-write
A text string which identifies the particular entry among the administrative unit order 4 entries.
                       au4CTPMonitor 1.3.6.1.4.1.1038.110.70.2.1.6 sagemboolean read-write
When the value of this field is set to false, the failure detection is stopped for this administrative unit order 4.
                       au4CTPFailure 1.3.6.1.4.1.1038.110.70.2.1.7 au4ctpfailure read-only
Active failures on administrative unit order 4
                       au4CTPSeverity 1.3.6.1.4.1.1038.110.70.2.1.8 severity read-only
A reference to failure severity for administrative unit order 4.
                       au4CTPAis 1.3.6.1.4.1.1038.110.70.2.1.20 severity read-write
Severity associed with Alarme Indication Signal failure for administrative unit order 4.
                       au4CTPLop 1.3.6.1.4.1.1038.110.70.2.1.21 severity read-write
Severity associed with Loss Of Pointer failure for administrative unit order 4.
                       au4CTPLom 1.3.6.1.4.1.1038.110.70.2.1.22 severity read-write
Severity associed with Loss Of MultiFrame failure for administrative unit order 4.
         vc4TTP 1.3.6.1.4.1.1038.110.100
                 vc4TTPNumber 1.3.6.1.4.1.1038.110.100.1 integer read-only
Number of virtual container order 4 in equipment.
                 vc4TTPTable 1.3.6.1.4.1.1038.110.100.2 no-access
List of virtual container order 4 in equipment.The number of records depends on the kinds of configured boards
                     vc4TTPEntry 1.3.6.1.4.1.1038.110.100.2.1 no-access
A particular virtual container order 4 of the equipment.
                         vc4TTPIndex 1.3.6.1.4.1.1038.110.100.2.1.1 integer read-only
A unique value which identify a particular virtual container order 4. The value of index is a constant assigned to an entry at equipment design time. It is usualy related to harware.
                         vc4TTPSinkPointer 1.3.6.1.4.1.1038.110.100.2.1.2 integer read-only
A reference to the object which sends the data flow to this function on synchronous or unsynchronous port interface side. This pointer corresponds to an index in the msTTPTable or nspiTTPTable.
                         vc4TTPSinkType 1.3.6.1.4.1.1038.110.100.2.1.3 vc4ttpsinktype read-only
A reference to the kind of the sink Pointer
                         vc4TTPName 1.3.6.1.4.1.1038.110.100.2.1.5 displaystring read-write
A text string which identifies the particular entry among the virtual container order 4 entries.
                         vc4TTPMonitor 1.3.6.1.4.1.1038.110.100.2.1.6 sagemboolean read-write
When the value of this field is set to false, the failure detection is stopped for this virtual container order 4.
                         vc4TTPFailure 1.3.6.1.4.1.1038.110.100.2.1.7 vc4ttpfailure read-only
Active failures on virtual container order 4
                         vc4TTPSeverity 1.3.6.1.4.1.1038.110.100.2.1.8 severity read-only
A reference to failure severity for virtual container order 4.
                         vc4TTPTraceMode 1.3.6.1.4.1.1038.110.100.2.1.9 vc4ttptracemode read-write
Configuration of the pathTrace length (1 byte or 16 bytes).
                         vc4TTPPathTraceExpected 1.3.6.1.4.1.1038.110.100.2.1.11 octet string read-write
The path trace is a user string that always follows the vc4. If the value the received path trace does not match this one, a tim (Trail Identifier Mismatch) failure is issued. The value `? ' match all possible received path trace.
                         vc4TTPPathTraceSent 1.3.6.1.4.1.1038.110.100.2.1.12 octet string read-write
The path trace is a user string that always follows the vc4. The value of this field is sent in j1 byte as path trace for this vc4. The default value is `all 0'.
                         vc4TTPPathTraceReceived 1.3.6.1.4.1.1038.110.100.2.1.13 octet string read-only
The path trace is a user string that always follows the vc4. The value is the actual path trace received in j1 byte
                         vc4TTPLabelExpected 1.3.6.1.4.1.1038.110.100.2.1.14 vc4ttpsignallabel read-only
The signal label indicates the multiplexing structure of the vc4. If the signal label received for this vc4 is not null and does not match this field, a Signal Label Mismatch failure is detected. If the received label is null a virtual container UNEQuiped failure is detected.
                         vc4TTPLabelSent 1.3.6.1.4.1.1038.110.100.2.1.15 vc4ttpsignallabel read-write
The signal label indicates the multiplexing structure of the vc4. The value of this field in sent as signal label for the vc4.
                         vc4TTPLabelReceived 1.3.6.1.4.1.1038.110.100.2.1.16 vc4ttpsignallabel read-only
The signal label indicates the multiplexing structure of the vc4. The value of this field is the actual received signal label for this vc4
                         vc4TTPSdThreshold 1.3.6.1.4.1.1038.110.100.2.1.17 integer read-write
A Signal Degrade failure is declared if the error block rate is greater than 1E(-SdThreshold). The Signal Degrade failure desapeared when the error block rate is less than 1E(1 - SdThreshold).
                         vc4TTPSesThreshold 1.3.6.1.4.1.1038.110.100.2.1.18 integer read-only
The number of errors above which the second is declared severely errored for this interface/function. This value apply for near and far interface/function
                         vc4TTPBidirectionnal 1.3.6.1.4.1.1038.110.100.2.1.19 sagemboolean read-write
If set to false the equipment does not send Remote Defect Indication.
                         vc4TTPRdi 1.3.6.1.4.1.1038.110.100.2.1.20 severity read-write
Severity associed with Remote Defect Indication failure for virtual container order 4.
                         vc4TTPSd 1.3.6.1.4.1.1038.110.100.2.1.21 severity read-write
Severity associed with Signal Degrade failure for virtual container order 4.
                         vc4TTPUneq 1.3.6.1.4.1.1038.110.100.2.1.22 severity read-write
Severity associed with virtual container UNEQuiped failure for virtual container order 4.
                         vc4TTPPlm 1.3.6.1.4.1.1038.110.100.2.1.23 severity read-write
Severity associed with Path Label Mismatch failure for virtual container order 4.
                         vc4TTPTimDis 1.3.6.1.4.1.1038.110.100.2.1.24 sagemboolean read-write
If set to true the equipment does not manage the Tim Failure.
                         vc4TTPTim 1.3.6.1.4.1.1038.110.100.2.1.25 severity read-write
Severity associed with Trail Identifier Mismatch failure for virtual container order 4.
         tu3CTP 1.3.6.1.4.1.1038.110.120
                 tu3CTPNumber 1.3.6.1.4.1.1038.110.120.1 integer read-only
Number of tributary unit in equipment.
                 tu3CTPTable 1.3.6.1.4.1.1038.110.120.2 no-access
List of tributary units order 3 in equipment which are availables for new connection or used in the same connection level. In that case, an indication on the connection point status is set into the tu3CTPStatus Variable. All tu3 CTP, which are involved in different connection level (tu12 or au4), disappear from this List.
                     tu3CTPEntry 1.3.6.1.4.1.1038.110.120.2.1 no-access
A particular tributary unit of the equipment.
                         tu3CTPIndex 1.3.6.1.4.1.1038.110.120.2.1.1 integer read-only
Index that identifies the particular entry among the tributary unit entries.
                         tu3CTPStatus 1.3.6.1.4.1.1038.110.120.2.1.2 ctpstatus read-only
tu3 connection point Status: free or used. The 'free' value is used when there is no connection with this output CTP
                         tu3CTPName 1.3.6.1.4.1.1038.110.120.2.1.5 displaystring read-write
A text string which identifies the particular entry among the tributary unit entries.
                         tu3CTPMonitor 1.3.6.1.4.1.1038.110.120.2.1.6 sagemboolean read-write
When the value of this field is set to false, the failure detection is stopped for this tributary unit.
                         tu3CTPFailure 1.3.6.1.4.1.1038.110.120.2.1.7 tu3ctpfailure read-only
Active failures on tributary unit
                         tu3CTPSeverity 1.3.6.1.4.1.1038.110.120.2.1.8 severity read-only
A reference to failure severity for tributary unit.
                         tu3CTPAis 1.3.6.1.4.1.1038.110.120.2.1.20 severity read-write
Severity associed with Alarme Indication Signal failure for tributary unit.
                         tu3CTPLop 1.3.6.1.4.1.1038.110.120.2.1.21 severity read-write
Severity associed with Loss Of Pointer failure for tributary unit.
         vc3TTP 1.3.6.1.4.1.1038.110.130
                 vc3TTPNumber 1.3.6.1.4.1.1038.110.130.1 integer read-only
Number of virtual container order 3 in equipment.
                 vc3TTPTable 1.3.6.1.4.1.1038.110.130.2 no-access
List of virtual container order 3 in equipment.The number of records depends on the kinds of configured boards
                     vc3TTPEntry 1.3.6.1.4.1.1038.110.130.2.1 no-access
A particular virtual container order 3 of the equipment.
                         vc3TTPIndex 1.3.6.1.4.1.1038.110.130.2.1.1 integer read-only
A unique value which identify a particular virtual container order 3. The value of index is a constant assigned to an entry at equipment design time. It is usualy related to harware.
                         vc3TTPSinkPointer 1.3.6.1.4.1.1038.110.130.2.1.2 integer read-only
A reference to the object which sends the data flow to this function on non-sdh physical port side.
                         vc3TTPSinkType 1.3.6.1.4.1.1038.110.130.2.1.3 vc3ttpsinktype read-only
A reference to the kind of the sink Pointer
                         vc3TTPName 1.3.6.1.4.1.1038.110.130.2.1.5 displaystring read-write
A text string which identifies the particular entry among the virtual container order 3 entries.
                         vc3TTPMonitor 1.3.6.1.4.1.1038.110.130.2.1.6 sagemboolean read-write
When the value of this field is set to false, the failure detection is stopped for this virtual container order 3.
                         vc3TTPFailure 1.3.6.1.4.1.1038.110.130.2.1.7 vclofailure read-only
Active failures on virtual container order 3
                         vc3TTPSeverity 1.3.6.1.4.1.1038.110.130.2.1.8 severity read-only
A reference to failure severity for virtual container order 3.
                         vc3TTPPathTraceExpected 1.3.6.1.4.1.1038.110.130.2.1.9 octet string read-write
The path trace is a user string that always follows the vc3. If the value the received path trace does not match this one, a tim (Trail Identifier Mismatch) failure is issued. The value `? ' match all possible received path trace.
                         vc3TTPPathTraceSent 1.3.6.1.4.1.1038.110.130.2.1.10 octet string read-write
The path trace is a user string that always follows the vc3. The value of this field is sent in j1 byte as path trace for this vc3. The default value is `all 0'.
                         vc3TTPPathTraceReceived 1.3.6.1.4.1.1038.110.130.2.1.11 octet string read-only
The path trace is a user string that always follows the vc3. The value is the actual path trace received in j1 byte
                         vc3TTPLabelExpected 1.3.6.1.4.1.1038.110.130.2.1.12 vc3ttpsignallabel read-only
The signal label indicates the multiplexing structure of the vc3. Usualy the value of this field cannot be modified as most equipment use the asynchronous bit multiplexing. For historical reasons the receipt of label `unspecified ' does not produce a Signal Label Mismatch failure.
                         vc3TTPLabelSent 1.3.6.1.4.1.1038.110.130.2.1.13 vc3ttpsignallabel read-write
The signal label indicates the multiplexing structure of the vc3. The value of this field is sent as signal label for the vc3. The unspecified value is used for compatibilty with old sdh equipments. The `unequiped' value actives low order unequiped generator (lug). In this case all 1 signal is inserted down and up stream.
                         vc3TTPLabelReceived 1.3.6.1.4.1.1038.110.130.2.1.14 vc3ttpsignallabel read-only
The signal label indicates the multiplexing structure of the vc3. The value of this field is the actual received signal label for this vc3
                         vc3TTPSdThreshold 1.3.6.1.4.1.1038.110.130.2.1.15 integer read-write
A Signal Degrade failure is declared if the error block rate is greater than 1E(-SdThreshold). The Signal Degrade failure desapeared when the error block rate is less than 1E(1 - SdThreshold).
                         vc3TTPSesThreshold 1.3.6.1.4.1.1038.110.130.2.1.16 integer read-only
The number of errors above which the second is declared severely errored for this interface/function. This value apply for near and far interface/function
                         vc3TTPBidirectionnal 1.3.6.1.4.1.1038.110.130.2.1.17 sagemboolean read-write
If set to false the equipment does not send Remote Defect Indication.
                         vc3TTPRdi 1.3.6.1.4.1.1038.110.130.2.1.20 severity read-write
Severity associed with Remote Defect Indication failure for virtual container order 3.
                         vc3TTPSd 1.3.6.1.4.1.1038.110.130.2.1.21 severity read-write
Severity associed with Signal Degrade failure for virtual container order 3.
                         vc3TTPUneq 1.3.6.1.4.1.1038.110.130.2.1.22 severity read-write
Severity associed with virtual container UNEQuiped failure for virtual container order 3.
                         vc3TTPPlm 1.3.6.1.4.1.1038.110.130.2.1.23 severity read-write
Severity associed with Path Label Mismatch failure for virtual container order 3.
                         vc3TTPTim 1.3.6.1.4.1.1038.110.130.2.1.24 severity read-write
Severity associed with Trail Identifier Mismatch failure for virtual container order 3.
         tu12CTP 1.3.6.1.4.1.1038.110.140
                 tu12CTPNumber 1.3.6.1.4.1.1038.110.140.1 integer read-only
Number of tributary unit in equipment.
                 tu12CTPTable 1.3.6.1.4.1.1038.110.140.2 no-access
List of tributary unit order 12 in equipment which are availables for new connection or used in the same connection level. In that case, an indication on the connection point Status is set into the tu12CTPStatus Variable. All tu12 CTP, which are involved in a different connection level (tu3 or au4), disappear from this List.
                     tu12CTPEntry 1.3.6.1.4.1.1038.110.140.2.1 no-access
A particular tributary unit of the equipment.
                         tu12CTPIndex 1.3.6.1.4.1.1038.110.140.2.1.1 integer read-only
A unique value which identify a particular tu12.
                         tu12CTPStatus 1.3.6.1.4.1.1038.110.140.2.1.2 ctpstatus read-only
tu12 connection point Status: free or used. The 'free' value is used when there is no connection with this output CTP
                         tu12CTPName 1.3.6.1.4.1.1038.110.140.2.1.5 displaystring read-write
A text string which identifies the particular entry among the tributary unit entries.
                         tu12CTPMonitor 1.3.6.1.4.1.1038.110.140.2.1.6 sagemboolean read-write
When the value of this field is set to false, the failure detection is stopped for this tributary unit.
                         tu12CTPFailure 1.3.6.1.4.1.1038.110.140.2.1.7 tu12ctpfailure read-only
Active failures on tributary unit
                         tu12CTPSeverity 1.3.6.1.4.1.1038.110.140.2.1.8 severity read-only
A reference to failure severity for tributary unit.
                         tu12CTPAis 1.3.6.1.4.1.1038.110.140.2.1.20 severity read-write
Severity associed with Alarme Indication Signal failure for tributary unit.
                         tu12CTPLop 1.3.6.1.4.1.1038.110.140.2.1.21 severity read-write
Severity associed with Loss Of Pointer failure for tributary unit.
         vc12TTP 1.3.6.1.4.1.1038.110.150
                 vc12TTPNumber 1.3.6.1.4.1.1038.110.150.1 integer read-only
Number of virtual container order 12 in equipment.
                 vc12TTPTable 1.3.6.1.4.1.1038.110.150.2 no-access
List of virtual container order 12 in equipment.The number of records depends on the kinds of configured boards
                     vc12TTPEntry 1.3.6.1.4.1.1038.110.150.2.1 no-access
A particular virtual container order 12 of the equipment.
                         vc12TTPIndex 1.3.6.1.4.1.1038.110.150.2.1.1 integer read-only
A unique value which identify a particular virtual container order 12. The value of index is a constant assigned to an entry at equipment design time. It is usualy related to harware.
                         vc12TTPSinkPointer 1.3.6.1.4.1.1038.110.150.2.1.2 integer read-only
A reference to the object which sends the data flow to this function on non-sdh physical port side.
                         vc12TTPSinkType 1.3.6.1.4.1.1038.110.150.2.1.3 vc12ttpsinktype read-only
A reference to the kind of the sink Pointer
                         vc12TTPName 1.3.6.1.4.1.1038.110.150.2.1.5 displaystring read-write
A text string which identifies the particular entry among the virtual container order 12 entries.
                         vc12TTPMonitor 1.3.6.1.4.1.1038.110.150.2.1.6 sagemboolean read-write
When the value of this field is set to false, the failure detection is stopped for this virtual container order 12.
                         vc12TTPFailure 1.3.6.1.4.1.1038.110.150.2.1.7 vclofailure read-only
Active failures on virtual container order 12
                         vc12TTPSeverity 1.3.6.1.4.1.1038.110.150.2.1.8 severity read-only
A reference to failure severity for virtual container order 12.
                         vc12TTPPathTraceExpected 1.3.6.1.4.1.1038.110.150.2.1.9 octet string read-write
The path trace is a user string that always follows the vc12. If the value the received path trace does not match this one, a tim (Trail Identifier Mismatch) failure is issued. The value `? ' match all possible received path trace.
                         vc12TTPPathTraceSent 1.3.6.1.4.1.1038.110.150.2.1.10 octet string read-write
The path trace is a user string that always follows the vc12. The value of this field is sent in j2 byte as path trace for this vc12. The default value is `all 0'.
                         vc12TTPPathTraceReceived 1.3.6.1.4.1.1038.110.150.2.1.11 octet string read-only
The path trace is a user string that always follows the vc12. The value is the actual path trace received in j2 byte
                         vc12TTPLabelExpected 1.3.6.1.4.1.1038.110.150.2.1.12 vc12ttpsignallabel read-only
The signal label indicates the multiplexing structure of the vc12. Usualy the value of this field cannot be modified as most equipment use the asynchronous bit multiplexing. For historical reasons the receipt of label `unspecified ' does not produce a Signal Label Mismatch failure.
                         vc12TTPLabelSent 1.3.6.1.4.1.1038.110.150.2.1.13 vc12ttpsignallabel read-write
The signal label indicates the multiplexing structure of the vc12. The value of this field is sent as signal label for the vc12. The unspecified value is used for compatibilty with old sdh equipments. The `unequiped' value actives low order unequiped generator (lug). In this case all 1 signal is inserted down and up stream.
                         vc12TTPLabelReceived 1.3.6.1.4.1.1038.110.150.2.1.14 vc12ttpsignallabel read-only
The signal label indicates the multiplexing structure of the vc12. The value of this field is the actual received signal label for this vc12
                         vc12TTPSdThreshold 1.3.6.1.4.1.1038.110.150.2.1.15 integer read-write
A Signal Degrade failure is declared if the error block rate is greater than 1E(-SdThreshold). The Signal Degrade failure desapeared when the error block rate is less than 1E(1 - SdThreshold).
                         vc12TTPSesThreshold 1.3.6.1.4.1.1038.110.150.2.1.16 integer read-only
The number of errors above which the second is declared severely errored for this interface/function. This value apply for near and far interface/function
                         vc12TTPBidirectionnal 1.3.6.1.4.1.1038.110.150.2.1.17 sagemboolean read-write
If set to false the equipment does not send Remote Defect Indication.
                         vc12TTPRdi 1.3.6.1.4.1.1038.110.150.2.1.20 severity read-write
Severity associed with Remote Defect Indication failure for virtual container order 12.
                         vc12TTPSd 1.3.6.1.4.1.1038.110.150.2.1.21 severity read-write
Severity associed with Signal Degrade failure for virtual container order 12.
                         vc12TTPUneq 1.3.6.1.4.1.1038.110.150.2.1.22 severity read-write
Severity associed with virtual container UNEQuiped failure for virtual container order 12.
                         vc12TTPPlm 1.3.6.1.4.1.1038.110.150.2.1.23 severity read-write
Severity associed with Path Label Mismatch failure for virtual container order 12.
                         vc12TTPTim 1.3.6.1.4.1.1038.110.150.2.1.24 severity read-write
Severity associed with Trail Identifier Mismatch failure for virtual container order 12.
         nspiCTP 1.3.6.1.4.1.1038.110.160
                 nspiCTPNumber 1.3.6.1.4.1.1038.110.160.1 integer read-only
A unique value which identify a particular non-sdh physical port. The value of index is a constant assigned to an entry at equipment design time. It is usualy related to harware.
                 nspiCTPTable 1.3.6.1.4.1.1038.110.160.2 no-access
List of non-sdh physical port in equipment.
                     nspiCTPEntry 1.3.6.1.4.1.1038.110.160.2.1 no-access
A particular non-sdh physical port of the equipment.
                         nspiCTPIndex 1.3.6.1.4.1.1038.110.160.2.1.1 integer read-only
A unique value which identify a particular non-sdh physical port. The value of index is a constant assigned to an entry at equipment design time. It is usualy related to harware.
                         nspiCTPTTPType 1.3.6.1.4.1.1038.110.160.2.1.2 nspisrctype read-only
The type of VC which is associated to the nspi interface.
                         nspiCTPStatus 1.3.6.1.4.1.1038.110.160.2.1.3 ctpstatus read-only
nspi connection point Status: free or used. The 'free' value is used when there is no connection with this output CTP
                         nspiCTPName 1.3.6.1.4.1.1038.110.160.2.1.4 displaystring read-write
A text string which identifies the particular entry among the non-sdh physical port entries.
         nspiTTP 1.3.6.1.4.1.1038.110.170
                 nspiTTPNumber 1.3.6.1.4.1.1038.110.170.1 integer read-only
A unique value which identify a particular non-sdh physical port. The value of index is a constant assigned to an entry at equipment design time. It is usualy related to harware.
                 nspiTTPTable 1.3.6.1.4.1.1038.110.170.2 no-access
List of non-sdh physical port in equipment.
                     nspiTTPEntry 1.3.6.1.4.1.1038.110.170.2.1 no-access
A particular non-sdh physical port of the equipment.
                         nspiTTPIndex 1.3.6.1.4.1.1038.110.170.2.1.1 integer read-only
A unique value which identify a particular non-sdh physical port. The value of index is a constant assigned to an entry at equipment design time. It is usualy related to harware.
                         nspiTTPType 1.3.6.1.4.1.1038.110.170.2.1.2 nspittptype read-only
The type of media for the nspi interface.
                         nspiTTPLevel 1.3.6.1.4.1.1038.110.170.2.1.3 nspittplevel read-only
The rate level of the nspi interface.
                         nspiTTPName 1.3.6.1.4.1.1038.110.170.2.1.4 displaystring read-write
A text string which identifies the particular entry among the non-sdh physical port entries.
                         nspiTTPBoardIndex 1.3.6.1.4.1.1038.110.170.2.1.5 integer read-only
Index of the Board that supports the physical acces of this interface
                         nspiTTPBoardAcces 1.3.6.1.4.1.1038.110.170.2.1.6 integer read-only
Friendly Index of the physical acces on the Board that supports the interface
                         nspiTTPSrcType 1.3.6.1.4.1.1038.110.170.2.1.7 nspisrctype read-only
A reference to the type of object which sends the data flow to this interface. Usually the value is vc12, vc3 or vc4 types.
                         nspiTTPSrcPointer 1.3.6.1.4.1.1038.110.170.2.1.8 integer read-only
A reference to the object which sends the data flow to this interface. Usually the value is the Index of a vc12, vc3 or vc4.
                         nspiTTPMonitor 1.3.6.1.4.1.1038.110.170.2.1.9 sagemboolean read-write
When the value of this field is set to false, the failure detection is stopped for this non-sdh physical port.
                         nspiTTPFailure 1.3.6.1.4.1.1038.110.170.2.1.10 nspittpfailure read-only
Active failures on non-sdh physical port
                         nspiTTPSeverity 1.3.6.1.4.1.1038.110.170.2.1.11 severity read-only
A reference to failure severity for non-sdh physical port.
                         nspiTTPLoopback 1.3.6.1.4.1.1038.110.170.2.1.14 loopback read-write
This field gives the active loopback status on the non-sdh physical port. When its value is `line' the data flow recieved from the port side is sent back to the line. When its value is `equipment' the data flow recieved form equipment side is send back. The field can be set to a particular loopback value, even if there no garantee that the loopback is really done. The real loopback status of the interface must be checked in the response. The loopback can be cleared by the equipment when it cannot remain for any reason.
                         nspiTTPLos 1.3.6.1.4.1.1038.110.170.2.1.20 severity read-write
Severity associed with Loss Of Signal failure for non-sdh physical port.
                         nspiTTPAis 1.3.6.1.4.1.1038.110.170.2.1.21 severity read-write
Severity associed with Alarme Indication Signal failure for non-sdh physical port.
         channel 1.3.6.1.4.1.1038.110.180
                 channelNumber 1.3.6.1.4.1.1038.110.180.1 integer read-only
Number of SDH Channels in equipment.
                 channelTable 1.3.6.1.4.1.1038.110.180.2 no-access
List of SDH Channels in equipment.
                     channelEntry 1.3.6.1.4.1.1038.110.180.2.1 no-access
A particular SDH Channel of the equipment.
                         channelIndex 1.3.6.1.4.1.1038.110.180.2.1.1 integer read-only
A unique value which identify a particular SDH Channel. The value of index is a constant assigned to an entry at equipment design time. It is usualy related to harware.
                         channelEncaps 1.3.6.1.4.1.1038.110.180.2.1.2 channelencaps read-write
The type of encapsulation used to map Data stream into Sdh containers
                         channelNbVc4 1.3.6.1.4.1.1038.110.180.2.1.5 integer read-write
Number of VC4 into the channel.
                         channelNbVc3 1.3.6.1.4.1.1038.110.180.2.1.6 integer read-write
Number of VC3 into the channel.
                         channelNbVc12 1.3.6.1.4.1.1038.110.180.2.1.7 integer read-write
Number of VC12 into the channel.
                         channelConcat 1.3.6.1.4.1.1038.110.180.2.1.8 channelconcat read-write
The type of Concatenation used within the channel
                         channelAdminStatus 1.3.6.1.4.1.1038.110.180.2.1.9 integer read-write
The desired state of the channel. The testing(3) state indicates that no operational packets can be passed. Enumeration: 'down': 2, 'testing': 3, 'up': 1.
                         channelOperStatus 1.3.6.1.4.1.1038.110.180.2.1.10 integer read-only
The current operational state of the channel. The testing(3) state indicates that no operational packets can be passed. Enumeration: 'down': 2, 'testing': 3, 'up': 1.
                         channelFirstIndex 1.3.6.1.4.1.1038.110.180.2.1.11 integer read-write
Index of the first Vc in the Channel when it is configured. Otherwise this field is set to 0.
                         channelDelay 1.3.6.1.4.1.1038.110.180.2.1.12 integer read-write
This field give the maximum delay (in millisecondes) for receiving virtual concatenated frames. This field is set to 0 when channelConcat is different to virtual(1)
                         channelMonitor 1.3.6.1.4.1.1038.110.180.2.1.13 sagemboolean read-write
When the value of this field is set to false, the failure detection is stopped for this channel.
                         channelFailure 1.3.6.1.4.1.1038.110.180.2.1.14 channelfailure read-only
Active failures on channel
                         channelSeverity 1.3.6.1.4.1.1038.110.180.2.1.15 severity read-only
A reference to failure severity for non-sdh physical port.
                         channelLoa 1.3.6.1.4.1.1038.110.180.2.1.16 severity read-write
Severity associated with Loss Of Alignment failure for channel.
                         channelLom 1.3.6.1.4.1.1038.110.180.2.1.17 severity read-write
Severity associated with Loss Of Multiframe failure for channel.
                         channelSqm 1.3.6.1.4.1.1038.110.180.2.1.18 severity read-write
Severity associated with Sequence Mismatch failure for channel.
         bandwidth 1.3.6.1.4.1.1038.110.190
                 bandwidthNumber 1.3.6.1.4.1.1038.110.190.1 integer read-only
Number of bandwidth units which are available in the equipement. The number of units depends on their type (Vc4, Vc3, Vc12), on the number of Data card and on the bandwidth size which has been configured for this card. For a Data card which is mapped on a STM16, there are 16 Vc4 entries (or 3*16 Vc3 entries or 63*16 Vc12 entries) in the BandwidthTable.
                 bandwidthTable 1.3.6.1.4.1.1038.110.190.2 no-access
List of Bandwidth units in equipment. It represent the bandwidth occupation of each non-sdh card
                     bandwidthEntry 1.3.6.1.4.1.1038.110.190.2.1 no-access
A particular unit part of a non-sdh card bandwidth.
                         bandwidthIndex 1.3.6.1.4.1.1038.110.190.2.1.1 integer read-only
A unique value which identify a particular unit of a non-sdh card bandwidth. The value of index is a Vc Index which change when bandwidthSrcType value is modified.
                         bandwidthBoardIndex 1.3.6.1.4.1.1038.110.190.2.1.2 integer read-only
Index of the Board that supports the bandwidth unit.
                         bandwidthSrcType 1.3.6.1.4.1.1038.110.190.2.1.3 nspisrctype read-write
Define the decomposition level of the bandwidth.
                         bandwidthSrcPointer 1.3.6.1.4.1.1038.110.190.2.1.4 integer read-only
this field is set to bandwidthIndex when the unit is used by a channel and set to 0 otherwise. It defines the TTP and CTP index associated to the channel.
                         bandwidthSinkType 1.3.6.1.4.1.1038.110.190.2.1.5 nspisrctype read-write
A reference to the kind of the sink Pointer. Usually the value is Channel.
                         bandwidthSinkPointer 1.3.6.1.4.1.1038.110.190.2.1.6 integer read-write
A reference to the object which sends the data flow to this function on unsynchronous port interface side. This pointer corresponds to an index in the channelTable.
                         bandwidthAdminStatus 1.3.6.1.4.1.1038.110.190.2.1.7 integer read-write
The desired state of the Vc. The testing(3) state indicates that no operational packets can be passed. Enumeration: 'down': 2, 'testing': 3, 'up': 1.
                         bandwidthOperStatus 1.3.6.1.4.1.1038.110.190.2.1.8 integer read-only
The current operational state of the Vc. The testing(3) state indicates that no operational packets can be passed. Enumeration: 'down': 2, 'testing': 3, 'up': 1.
                         bandwidthPrevIndex 1.3.6.1.4.1.1038.110.190.2.1.9 integer read-only
A reference to the previous VC into the channel. This field is set to 0 if the VC is not associated to a channel or if it is the first Vc of the channel.
                         bandwidthNextIndex 1.3.6.1.4.1.1038.110.190.2.1.10 integer read-only
A reference to the next VC into the channel. This field is set to 0 if the VC is not associated to a channel or if it is the last Vc of the channel.