RMS-COMPACT-SNMPv1-MAIN-MIB: View SNMP OID List / Download MIB

VENDOR: SINETICA


 Home MIB: RMS-COMPACT-SNMPv1-MAIN-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, SNMPv2-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sinetica 1.3.6.1.4.1.3711
           rms_compact 1.3.6.1.4.1.3711.15
                 rms_compact1 1.3.6.1.4.1.3711.15.1
                     rms_cObjects 1.3.6.1.4.1.3711.15.1.1
                         rms_cEnviroment 1.3.6.1.4.1.3711.15.1.1.1
                             rms_cTemp1 1.3.6.1.4.1.3711.15.1.1.1.1
                                 rms_cTemp1EnableMonitoring 1.3.6.1.4.1.3711.15.1.1.1.1.1 integer read-write
Setting to one enables monitoring of Temperature Enumeration: 'on': 1, 'off': 0.
                                 rms_cTemp1Name 1.3.6.1.4.1.3711.15.1.1.1.1.2 displaystring read-write
The name of the temperature reading
                                 rms_cTemp1CalibrationOffset 1.3.6.1.4.1.3711.15.1.1.1.1.3 integer read-write
Calibration offset in 0.1 degrees
                                 rms_cTemp1Current 1.3.6.1.4.1.3711.15.1.1.1.1.4 integer read-only
The current temperature reading in 0.1%
                                 rms_cTemp1Thresholds 1.3.6.1.4.1.3711.15.1.1.1.1.5
                                     rms_cTemp1LowerControlLevel 1.3.6.1.4.1.3711.15.1.1.1.1.5.1 integer read-write
The Lower Limit temperature threshold in 0.1 degrees
                                     rms_cTemp1LowerWarningLevel 1.3.6.1.4.1.3711.15.1.1.1.1.5.2 integer read-write
The Lower Control temperature threshold in 0.1 degrees
                                     rms_cTemp1UpperWarningLevel 1.3.6.1.4.1.3711.15.1.1.1.1.5.3 integer read-write
The Upper Control temperature threshold in 0.1 degrees
                                     rms_cTemp1UpperControlLevel 1.3.6.1.4.1.3711.15.1.1.1.1.5.4 integer read-write
The Upper Limit temperature threshold in 0.1 degrees
                                 rms_cTemp1OFFtoONtraps 1.3.6.1.4.1.3711.15.1.1.1.1.6
                                     rms_cTemp1OFFtoONtrapLCL 1.3.6.1.4.1.3711.15.1.1.1.1.6.1 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cTemp1OFFtoONontrapLWL 1.3.6.1.4.1.3711.15.1.1.1.1.6.2 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cTemp1OFFtoONtrapUWL 1.3.6.1.4.1.3711.15.1.1.1.1.6.3 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cTemp1OFFtoONtrapUCL 1.3.6.1.4.1.3711.15.1.1.1.1.6.4 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cTemp1OFFtoONrepeatTimers 1.3.6.1.4.1.3711.15.1.1.1.1.7
                                     rms_cTemp1OFFtoONrepLCL 1.3.6.1.4.1.3711.15.1.1.1.1.7.1 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in minutes
                                     rms_cTemp1OFFtoONrepLWL 1.3.6.1.4.1.3711.15.1.1.1.1.7.2 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in minutes
                                     rms_cTemp1OFFtoONrepUWL 1.3.6.1.4.1.3711.15.1.1.1.1.7.3 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in minutes
                                     rms_cTemp1OFFtoONrepUCL 1.3.6.1.4.1.3711.15.1.1.1.1.7.4 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in minutes
                                 rms_cTemp1ONtoOFFtraps 1.3.6.1.4.1.3711.15.1.1.1.1.8
                                     rms_cTemp1ONtoOFFtrapLCL 1.3.6.1.4.1.3711.15.1.1.1.1.8.1 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cTemp1ONtoOFFtrapLWL 1.3.6.1.4.1.3711.15.1.1.1.1.8.2 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cTemp1ONtoOFFtrapUWL 1.3.6.1.4.1.3711.15.1.1.1.1.8.3 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cTemp1ONtoOFFtrapUCL 1.3.6.1.4.1.3711.15.1.1.1.1.8.4 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cTemp1ONtoOFFrepeatTimers 1.3.6.1.4.1.3711.15.1.1.1.1.9
                                     rms_cTemp1ONtoOFFrepLCL 1.3.6.1.4.1.3711.15.1.1.1.1.9.1 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cTemp1ONtoOFFrepLWL 1.3.6.1.4.1.3711.15.1.1.1.1.9.2 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cTemp1ONtoOFFrepUWL 1.3.6.1.4.1.3711.15.1.1.1.1.9.3 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cTemp1ONtoOFFrepUCL 1.3.6.1.4.1.3711.15.1.1.1.1.9.4 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                             rms_cHumid1 1.3.6.1.4.1.3711.15.1.1.1.2
                                 rms_cHumid1EnableMonitoring 1.3.6.1.4.1.3711.15.1.1.1.2.1 integer read-write
Setting to one enables monitoring of Humidity Enumeration: 'on': 1, 'off': 0.
                                 rms_cHumid1Name 1.3.6.1.4.1.3711.15.1.1.1.2.2 displaystring read-write
The name of the humidity reading
                                 rms_cHumid1CalibrationOffset 1.3.6.1.4.1.3711.15.1.1.1.2.3 integer read-write
Calibration offset in 0.1 percent
                                 rms_cHumid1Current 1.3.6.1.4.1.3711.15.1.1.1.2.4 integer read-only
The current humidity reading in 0.1%
                                 rms_cHumid1Thresholds 1.3.6.1.4.1.3711.15.1.1.1.2.5
                                     rms_cHumid1LowerControlLevel 1.3.6.1.4.1.3711.15.1.1.1.2.5.1 integer read-write
The Lower Limit Humidity threshold in 0.1 percent
                                     rms_cHumid1LowerWarningLevel 1.3.6.1.4.1.3711.15.1.1.1.2.5.2 integer read-write
The Lower Control humidity threshold in 0.1 percent
                                     rms_cHumid1UpperWarningLevel 1.3.6.1.4.1.3711.15.1.1.1.2.5.3 integer read-write
The Upper Control humidity threshold in 0.1 percent
                                     rms_cHumid1UpperControlLevel 1.3.6.1.4.1.3711.15.1.1.1.2.5.4 integer read-write
The Upper Limit humidity threshold in 0.1 percent
                                 rms_cHumid1OFFtoONtraps 1.3.6.1.4.1.3711.15.1.1.1.2.6
                                     rms_cHumid1OFFtoONtrapLCL 1.3.6.1.4.1.3711.15.1.1.1.2.6.1 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cHumid1OFFtoONtrapLWL 1.3.6.1.4.1.3711.15.1.1.1.2.6.2 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cHumid1OFFtoONtrapUWL 1.3.6.1.4.1.3711.15.1.1.1.2.6.3 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cHumid1OFFtoONtrapUCL 1.3.6.1.4.1.3711.15.1.1.1.2.6.4 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cHumid1OFFtoONrepeatTimers 1.3.6.1.4.1.3711.15.1.1.1.2.7
                                     rms_cHumid1OFFtoONrepLCL 1.3.6.1.4.1.3711.15.1.1.1.2.7.1 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cHumid1OFFtoONrepLWL 1.3.6.1.4.1.3711.15.1.1.1.2.7.2 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cHumid1OFFtoONrepUWL 1.3.6.1.4.1.3711.15.1.1.1.2.7.3 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cHumid1OFFtoONrepUCL 1.3.6.1.4.1.3711.15.1.1.1.2.7.4 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                 rms_cHumid1ONtoOFFtraps 1.3.6.1.4.1.3711.15.1.1.1.2.8
                                     rms_cHumid1ONtoOFFtrapLCL 1.3.6.1.4.1.3711.15.1.1.1.2.8.1 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cHumid1ONtoOFFtrapLWL 1.3.6.1.4.1.3711.15.1.1.1.2.8.2 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cHumid1ONtoOFFtrapUWL 1.3.6.1.4.1.3711.15.1.1.1.2.8.3 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cHumid1ONtoOFFtrapUCL 1.3.6.1.4.1.3711.15.1.1.1.2.8.4 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cHumid1ONtoOFFrepeatTimers 1.3.6.1.4.1.3711.15.1.1.1.2.9
                                     rms_cHumid1ONtoOFFrepLCL 1.3.6.1.4.1.3711.15.1.1.1.2.9.1 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cHumid1ONtoOFFrepLWL 1.3.6.1.4.1.3711.15.1.1.1.2.9.2 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cHumid1ONtoOFFrepUWL 1.3.6.1.4.1.3711.15.1.1.1.2.9.3 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cHumid1ONtoOFFrepUCL 1.3.6.1.4.1.3711.15.1.1.1.2.9.4 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                             rms_cTemp2 1.3.6.1.4.1.3711.15.1.1.1.3
                                 rms_cTemp2EnableMonitoring 1.3.6.1.4.1.3711.15.1.1.1.3.1 integer read-write
Setting to one enables monitoring of Temperature Enumeration: 'on': 1, 'off': 0.
                                 rms_cTemp2Name 1.3.6.1.4.1.3711.15.1.1.1.3.2 displaystring read-write
The name of the temperature reading
                                 rms_cTemp2CalibrationOffset 1.3.6.1.4.1.3711.15.1.1.1.3.3 integer read-write
Calibration offset in 0.1 degrees
                                 rms_cTemp2Current 1.3.6.1.4.1.3711.15.1.1.1.3.4 integer read-only
The current temperature reading in 0.1%
                                 rms_cTemp2Thresholds 1.3.6.1.4.1.3711.15.1.1.1.3.5
                                     rms_cTemp2LowerControlLevel 1.3.6.1.4.1.3711.15.1.1.1.3.5.1 integer read-write
The Lower Limit temperature threshold in 0.1 degrees
                                     rms_cTemp2LowerWarningLevel 1.3.6.1.4.1.3711.15.1.1.1.3.5.2 integer read-write
The Lower Control temperature threshold in 0.1 degrees
                                     rms_cTemp2UpperWarningLevel 1.3.6.1.4.1.3711.15.1.1.1.3.5.3 integer read-write
The Upper Control temperature threshold in 0.1 degrees
                                     rms_cTemp2UpperControlLevel 1.3.6.1.4.1.3711.15.1.1.1.3.5.4 integer read-write
The Upper Limit temperature threshold in 0.1 degrees
                                 rms_cTemp2OFFtoONtraps 1.3.6.1.4.1.3711.15.1.1.1.3.6
                                     rms_cTemp2OFFtoONtrapLCL 1.3.6.1.4.1.3711.15.1.1.1.3.6.1 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cTemp2OFFtoONontrapLWL 1.3.6.1.4.1.3711.15.1.1.1.3.6.2 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cTemp2OFFtoONtrapUWL 1.3.6.1.4.1.3711.15.1.1.1.3.6.3 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cTemp2OFFtoONtrapUCL 1.3.6.1.4.1.3711.15.1.1.1.3.6.4 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cTemp2OFFtoONrepeatTimers 1.3.6.1.4.1.3711.15.1.1.1.3.7
                                     rms_cTemp2OFFtoONrepLCL 1.3.6.1.4.1.3711.15.1.1.1.3.7.1 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cTemp2OFFtoONrepLWL 1.3.6.1.4.1.3711.15.1.1.1.3.7.2 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cTemp2OFFtoONrepUWL 1.3.6.1.4.1.3711.15.1.1.1.3.7.3 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cTemp2OFFtoONrepUCL 1.3.6.1.4.1.3711.15.1.1.1.3.7.4 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                 rms_cTemp2ONtoOFFtraps 1.3.6.1.4.1.3711.15.1.1.1.3.8
                                     rms_cTemp2ONtoOFFtrapLCL 1.3.6.1.4.1.3711.15.1.1.1.3.8.1 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cTemp2ONtoOFFtrapLWL 1.3.6.1.4.1.3711.15.1.1.1.3.8.2 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cTemp2ONtoOFFtrapUWL 1.3.6.1.4.1.3711.15.1.1.1.3.8.3 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cTemp2ONtoOFFtrapUCL 1.3.6.1.4.1.3711.15.1.1.1.3.8.4 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cTemp2ONtoOFFrepeatTimers 1.3.6.1.4.1.3711.15.1.1.1.3.9
                                     rms_cTemp2ONtoOFFrepLCL 1.3.6.1.4.1.3711.15.1.1.1.3.9.1 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cTemp2ONtoOFFrepLWL 1.3.6.1.4.1.3711.15.1.1.1.3.9.2 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cTemp2ONtoOFFrepUWL 1.3.6.1.4.1.3711.15.1.1.1.3.9.3 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cTemp2ONtoOFFrepUCL 1.3.6.1.4.1.3711.15.1.1.1.3.9.4 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                             rms_cHumid2 1.3.6.1.4.1.3711.15.1.1.1.4
                                 rms_cHumid2EnableMonitoring 1.3.6.1.4.1.3711.15.1.1.1.4.1 integer read-write
Setting to one enables monitoring of Humidity Enumeration: 'on': 1, 'off': 0.
                                 rms_cHumid2Name 1.3.6.1.4.1.3711.15.1.1.1.4.2 displaystring read-write
The name of the humidity reading
                                 rms_cHumid2CalibrationOffset 1.3.6.1.4.1.3711.15.1.1.1.4.3 integer read-write
Calibration offset in 0.1 percent
                                 rms_cHumid2Current 1.3.6.1.4.1.3711.15.1.1.1.4.4 integer read-only
The current humidity reading in 0.1%
                                 rms_cHumid2Thresholds 1.3.6.1.4.1.3711.15.1.1.1.4.5
                                     rms_cHumid2LowerControlLevel 1.3.6.1.4.1.3711.15.1.1.1.4.5.1 integer read-write
The Lower Limit Humidity threshold in 0.1 percent
                                     rms_cHumid2LowerWarningLevel 1.3.6.1.4.1.3711.15.1.1.1.4.5.2 integer read-write
The Lower Control humidity threshold in 0.1 percent
                                     rms_cHumid2UpperWarningLevel 1.3.6.1.4.1.3711.15.1.1.1.4.5.3 integer read-write
The Upper Control humidity threshold in 0.1 percent
                                     rms_cHumid2UpperControlLevel 1.3.6.1.4.1.3711.15.1.1.1.4.5.4 integer read-write
The Upper Limit humidity threshold in 0.1 percent
                                 rms_cHumid2OFFtoONtraps 1.3.6.1.4.1.3711.15.1.1.1.4.6
                                     rms_cHumid2OFFtoONtrapLCL 1.3.6.1.4.1.3711.15.1.1.1.4.6.1 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cHumid2OFFtoONtrapLWL 1.3.6.1.4.1.3711.15.1.1.1.4.6.2 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cHumid2OFFtoONtrapUWL 1.3.6.1.4.1.3711.15.1.1.1.4.6.3 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cHumid2OFFtoONtrapUCL 1.3.6.1.4.1.3711.15.1.1.1.4.6.4 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cHumid2OFFtoONrepeatTimers 1.3.6.1.4.1.3711.15.1.1.1.4.7
                                     rms_cHumid2OFFtoONrepLCL 1.3.6.1.4.1.3711.15.1.1.1.4.7.1 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cHumid2OFFtoONrepLWL 1.3.6.1.4.1.3711.15.1.1.1.4.7.2 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cHumid2OFFtoONrepUWL 1.3.6.1.4.1.3711.15.1.1.1.4.7.3 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cHumid2OFFtoONrepUCL 1.3.6.1.4.1.3711.15.1.1.1.4.7.4 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                 rms_cHumid2ONtoOFFtraps 1.3.6.1.4.1.3711.15.1.1.1.4.8
                                     rms_cHumid2ONtoOFFtrapLCL 1.3.6.1.4.1.3711.15.1.1.1.4.8.1 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cHumid2ONtoOFFtrapLWL 1.3.6.1.4.1.3711.15.1.1.1.4.8.2 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cHumid2ONtoOFFtrapUWL 1.3.6.1.4.1.3711.15.1.1.1.4.8.3 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                     rms_cHumid2ONtoOFFtrapUCL 1.3.6.1.4.1.3711.15.1.1.1.4.8.4 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cHumid2ONtoOFFrepeatTimers 1.3.6.1.4.1.3711.15.1.1.1.4.9
                                     rms_cHumid2ONtoOFFrepLCL 1.3.6.1.4.1.3711.15.1.1.1.4.9.1 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cHumid2ONtoOFFrepLWL 1.3.6.1.4.1.3711.15.1.1.1.4.9.2 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cHumid2ONtoOFFrepUWL 1.3.6.1.4.1.3711.15.1.1.1.4.9.3 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                     rms_cHumid2ONtoOFFrepUCL 1.3.6.1.4.1.3711.15.1.1.1.4.9.4 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                   rms_cTemp1LowControlLimitAlarm 1.3.6.1.4.1.3711.15.1.1.1.10.101
Temperature is below the low control limit.
                                   rms_cTemp1LowWarningLimitAlarm 1.3.6.1.4.1.3711.15.1.1.1.10.102
Temperature is below the low warning limit.
                                   rms_cTemp1HighWarningLimitAlarm 1.3.6.1.4.1.3711.15.1.1.1.10.103
Temperature is over the high warning limit.
                                   rms_cTemp1HighControlLimitAlarm 1.3.6.1.4.1.3711.15.1.1.1.10.104
Temperature is over the high control limit.
                                   rms_cTemp1LowControlLimitNormal 1.3.6.1.4.1.3711.15.1.1.1.10.105
Temperature is inside the low control limit.
                                   rms_cTemp1LowWarningLimitNormal 1.3.6.1.4.1.3711.15.1.1.1.10.106
Temperature is inside the low warning limit.
                                   rms_cTemp1HighWarningLimitNormal 1.3.6.1.4.1.3711.15.1.1.1.10.107
Temperature is inside the high warning limit.
                                   rms_cTemp1HighControlLimitNormal 1.3.6.1.4.1.3711.15.1.1.1.10.108
Temperature is inside the high control limit.
                         rms_cContact 1.3.6.1.4.1.3711.15.1.1.2
                             rms_cContactNames 1.3.6.1.4.1.3711.15.1.1.2.1
                                 rms_cContact1Name 1.3.6.1.4.1.3711.15.1.1.2.1.1 displaystring read-write
The name of the contact
                                 rms_cContact2Name 1.3.6.1.4.1.3711.15.1.1.2.1.2 displaystring read-write
The name of the contact
                                 rms_cContact3Name 1.3.6.1.4.1.3711.15.1.1.2.1.3 displaystring read-write
The name of the contact
                                 rms_cContact4Name 1.3.6.1.4.1.3711.15.1.1.2.1.4 displaystring read-write
The name of the contact
                                 rms_cContact5Name 1.3.6.1.4.1.3711.15.1.1.2.1.5 displaystring read-write
The name of the contact
                                 rms_cContact6Name 1.3.6.1.4.1.3711.15.1.1.2.1.6 displaystring read-write
The name of the contact
                                 rms_cContact7Name 1.3.6.1.4.1.3711.15.1.1.2.1.7 displaystring read-write
The name of the contact
                                 rms_cContact8Name 1.3.6.1.4.1.3711.15.1.1.2.1.8 displaystring read-write
The name of the contact
                             rms_cContactType 1.3.6.1.4.1.3711.15.1.1.2.2
                                 rms_cContact1Type 1.3.6.1.4.1.3711.15.1.1.2.2.1 integer read-write
Level or posedge or negedge input detection Enumeration: 'negative-edge': 2, 'positive-edge': 1, 'level': 0.
                                 rms_cContact2Type 1.3.6.1.4.1.3711.15.1.1.2.2.2 integer read-write
Level or posedge or negedge input detection Enumeration: 'negative-edge': 2, 'positive-edge': 1, 'level': 0.
                                 rms_cContact3Type 1.3.6.1.4.1.3711.15.1.1.2.2.3 integer read-write
Level or posedge or negedge input detection Enumeration: 'negative-edge': 2, 'positive-edge': 1, 'level': 0.
                                 rms_cContact4Type 1.3.6.1.4.1.3711.15.1.1.2.2.4 integer read-write
Level or posedge or negedge input detection Enumeration: 'negative-edge': 2, 'positive-edge': 1, 'level': 0.
                                 rms_cContact5Type 1.3.6.1.4.1.3711.15.1.1.2.2.5 integer read-write
Level or posedge or negedge input detection Enumeration: 'negative-edge': 2, 'positive-edge': 1, 'level': 0.
                                 rms_cContact6Type 1.3.6.1.4.1.3711.15.1.1.2.2.6 integer read-write
Level or posedge or negedge input detection Enumeration: 'negative-edge': 2, 'positive-edge': 1, 'level': 0.
                                 rms_cContact7Type 1.3.6.1.4.1.3711.15.1.1.2.2.7 integer read-write
Level or posedge or negedge input detection Enumeration: 'negative-edge': 2, 'positive-edge': 1, 'level': 0.
                                 rms_cContact8Type 1.3.6.1.4.1.3711.15.1.1.2.2.8 integer read-write
Level or posedge or negedge input detection Enumeration: 'negative-edge': 2, 'positive-edge': 1, 'level': 0.
                             rms_cContactReset 1.3.6.1.4.1.3711.15.1.1.2.3
                                 rms_cContact1Reset 1.3.6.1.4.1.3711.15.1.1.2.3.1 integer read-write
Resets edge triggered input Enumeration: 'reset': 1.
                                 rms_cContact2Reset 1.3.6.1.4.1.3711.15.1.1.2.3.2 integer read-write
Resets edge triggered input Enumeration: 'reset': 1.
                                 rms_cContact3Reset 1.3.6.1.4.1.3711.15.1.1.2.3.3 integer read-write
Resets edge triggered input Enumeration: 'reset': 1.
                                 rms_cContact4Reset 1.3.6.1.4.1.3711.15.1.1.2.3.4 integer read-write
Resets edge triggered input Enumeration: 'reset': 1.
                                 rms_cContact5Reset 1.3.6.1.4.1.3711.15.1.1.2.3.5 integer read-write
Resets edge triggered input Enumeration: 'reset': 1.
                                 rms_cContact6Reset 1.3.6.1.4.1.3711.15.1.1.2.3.6 integer read-write
Resets edge triggered input Enumeration: 'reset': 1.
                                 rms_cContact7Reset 1.3.6.1.4.1.3711.15.1.1.2.3.7 integer read-write
Resets edge triggered input Enumeration: 'reset': 1.
                                 rms_cContact8Reset 1.3.6.1.4.1.3711.15.1.1.2.3.8 integer read-write
Resets edge triggered input Enumeration: 'reset': 1.
                             rms_cContactNormalStates 1.3.6.1.4.1.3711.15.1.1.2.4
                                 rms_cContact1NormalState 1.3.6.1.4.1.3711.15.1.1.2.4.1 integer read-write
Set to 0 for normally open condition, 1 for normally closed Enumeration: 'on': 1, 'off': 0.
                                 rms_cContact2NormalState 1.3.6.1.4.1.3711.15.1.1.2.4.2 integer read-write
Set to 0 for normally open condition, 1 for normally closed Enumeration: 'on': 1, 'off': 0.
                                 rms_cContact3NormalState 1.3.6.1.4.1.3711.15.1.1.2.4.3 integer read-write
Set to 0 for normally open condition, 1 for normally closed Enumeration: 'on': 1, 'off': 0.
                                 rms_cContact4NormalState 1.3.6.1.4.1.3711.15.1.1.2.4.4 integer read-write
Set to 0 for normally open condition, 1 for normally closed Enumeration: 'on': 1, 'off': 0.
                                 rms_cContact5NormalState 1.3.6.1.4.1.3711.15.1.1.2.4.5 integer read-write
Set to 0 for normally open condition, 1 for normally closed Enumeration: 'on': 1, 'off': 0.
                                 rms_cContact6NormalState 1.3.6.1.4.1.3711.15.1.1.2.4.6 integer read-write
Set to 0 for normally open condition, 1 for normally closed Enumeration: 'on': 1, 'off': 0.
                                 rms_cContact7NormalState 1.3.6.1.4.1.3711.15.1.1.2.4.7 integer read-write
Set to 0 for normally open condition, 1 for normally closed Enumeration: 'on': 1, 'off': 0.
                                 rms_cContact8NormalState 1.3.6.1.4.1.3711.15.1.1.2.4.8 integer read-write
Set to 0 for normally open condition, 1 for normally closed Enumeration: 'on': 1, 'off': 0.
                             rms_cContactCurrentStates 1.3.6.1.4.1.3711.15.1.1.2.5
                                 rms_cContact1CurrentState 1.3.6.1.4.1.3711.15.1.1.2.5.1 integer read-only
The current state of the contact Enumeration: 'on': 1, 'off': 0.
                                 rms_cContact2CurrentState 1.3.6.1.4.1.3711.15.1.1.2.5.2 integer read-only
The current state of the contact Enumeration: 'on': 1, 'off': 0.
                                 rms_cContact3CurrentState 1.3.6.1.4.1.3711.15.1.1.2.5.3 integer read-only
The current state of the contact Enumeration: 'on': 1, 'off': 0.
                                 rms_cContact4CurrentState 1.3.6.1.4.1.3711.15.1.1.2.5.4 integer read-only
The current state of the contact Enumeration: 'on': 1, 'off': 0.
                                 rms_cContact5CurrentState 1.3.6.1.4.1.3711.15.1.1.2.5.5 integer read-only
The current state of the contact Enumeration: 'on': 1, 'off': 0.
                                 rms_cContact6CurrentState 1.3.6.1.4.1.3711.15.1.1.2.5.6 integer read-only
The current state of the contact Enumeration: 'on': 1, 'off': 0.
                                 rms_cContact7CurrentState 1.3.6.1.4.1.3711.15.1.1.2.5.7 integer read-only
The current state of the contact Enumeration: 'on': 1, 'off': 0.
                                 rms_cContact8CurrentState 1.3.6.1.4.1.3711.15.1.1.2.5.8 integer read-only
The current state of the contact Enumeration: 'on': 1, 'off': 0.
                             rms_cContactOFFtoONtraps 1.3.6.1.4.1.3711.15.1.1.2.6
                                 rms_cContact1OFFtoONtrap 1.3.6.1.4.1.3711.15.1.1.2.6.1 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cContact2OFFtoONtrap 1.3.6.1.4.1.3711.15.1.1.2.6.2 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cContact3OFFtoONtrap 1.3.6.1.4.1.3711.15.1.1.2.6.3 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cContact4OFFtoONtrap 1.3.6.1.4.1.3711.15.1.1.2.6.4 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cContact5OFFtoONtrap 1.3.6.1.4.1.3711.15.1.1.2.6.5 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cContact6OFFtoONtrap 1.3.6.1.4.1.3711.15.1.1.2.6.6 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cContact7OFFtoONtrap 1.3.6.1.4.1.3711.15.1.1.2.6.7 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cContact8OFFtoONtrap 1.3.6.1.4.1.3711.15.1.1.2.6.8 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                             rms_cContactOFFtoONrepeatTimers 1.3.6.1.4.1.3711.15.1.1.2.7
                                 rms_cContact1OFFtoONrep 1.3.6.1.4.1.3711.15.1.1.2.7.1 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                 rms_cContact2OFFtoONrep 1.3.6.1.4.1.3711.15.1.1.2.7.2 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                 rms_cContact3OFFtoONrep 1.3.6.1.4.1.3711.15.1.1.2.7.3 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                 rms_cContact4OFFtoONrep 1.3.6.1.4.1.3711.15.1.1.2.7.4 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                 rms_cContact5OFFtoONrep 1.3.6.1.4.1.3711.15.1.1.2.7.5 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                 rms_cContact6OFFtoONrep 1.3.6.1.4.1.3711.15.1.1.2.7.6 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                 rms_cContact7OFFtoONrep 1.3.6.1.4.1.3711.15.1.1.2.7.7 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                 rms_cContact8OFFtoONrep 1.3.6.1.4.1.3711.15.1.1.2.7.8 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                             rms_cContactONtoOFFtraps 1.3.6.1.4.1.3711.15.1.1.2.8
                                 rms_cContact1ONtoOFFtrap 1.3.6.1.4.1.3711.15.1.1.2.8.1 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cContact2ONtoOFFtrap 1.3.6.1.4.1.3711.15.1.1.2.8.2 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cContact3ONtoOFFtrap 1.3.6.1.4.1.3711.15.1.1.2.8.3 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cContact4ONtoOFFtrap 1.3.6.1.4.1.3711.15.1.1.2.8.4 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cContact5ONtoOFFtrap 1.3.6.1.4.1.3711.15.1.1.2.8.5 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cContact6ONtoOFFtrap 1.3.6.1.4.1.3711.15.1.1.2.8.6 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cContact7ONtoOFFtrap 1.3.6.1.4.1.3711.15.1.1.2.8.7 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cContact8ONtoOFFtrap 1.3.6.1.4.1.3711.15.1.1.2.8.8 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                             rms_cContactONtoOFFrepeatTimers 1.3.6.1.4.1.3711.15.1.1.2.9
                                 rms_cContact1ONtoOFFrep 1.3.6.1.4.1.3711.15.1.1.2.9.1 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                 rms_cContact2ONtoOFFrep 1.3.6.1.4.1.3711.15.1.1.2.9.2 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                 rms_cContact3ONtoOFFrep 1.3.6.1.4.1.3711.15.1.1.2.9.3 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                 rms_cContact4ONtoOFFrep 1.3.6.1.4.1.3711.15.1.1.2.9.4 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                 rms_cContact5ONtoOFFrep 1.3.6.1.4.1.3711.15.1.1.2.9.5 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                 rms_cContact6ONtoOFFrep 1.3.6.1.4.1.3711.15.1.1.2.9.6 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                 rms_cContact7ONtoOFFrep 1.3.6.1.4.1.3711.15.1.1.2.9.7 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                 rms_cContact8ONtoOFFrep 1.3.6.1.4.1.3711.15.1.1.2.9.8 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                         rms_cOutput 1.3.6.1.4.1.3711.15.1.1.3
                             rms_cOutputEnables 1.3.6.1.4.1.3711.15.1.1.3.1
                                 rms_cOutput1Enable 1.3.6.1.4.1.3711.15.1.1.3.1.1 integer read-write
Set to one enables the output Enumeration: 'on': 1, 'off': 0.
                                 rms_cOutput2Enable 1.3.6.1.4.1.3711.15.1.1.3.1.2 integer read-write
Set to one enables the output Enumeration: 'on': 1, 'off': 0.
                                 rms_cOutput3Enable 1.3.6.1.4.1.3711.15.1.1.3.1.3 integer read-write
Set to one enables the output Enumeration: 'on': 1, 'off': 0.
                             rms_cOutputNames 1.3.6.1.4.1.3711.15.1.1.3.2
                                 rms_cOutput1Name 1.3.6.1.4.1.3711.15.1.1.3.2.1 displaystring read-write
The name of the output
                                 rms_cOutput2Name 1.3.6.1.4.1.3711.15.1.1.3.2.2 displaystring read-write
The name of the output
                                 rms_cOutput3Name 1.3.6.1.4.1.3711.15.1.1.3.2.3 displaystring read-write
The name of the output
                                 rms_cOutput4Name 1.3.6.1.4.1.3711.15.1.1.3.2.4 displaystring read-write
The name of the output
                             rms_cOutputStates 1.3.6.1.4.1.3711.15.1.1.3.3
                                 rms_cOutput1State 1.3.6.1.4.1.3711.15.1.1.3.3.1 integer read-write
Default State for the output Enumeration: 'on': 1, 'off': 0.
                                 rms_cOutput2State 1.3.6.1.4.1.3711.15.1.1.3.3.2 integer read-write
Default State for the output Enumeration: 'on': 1, 'off': 0.
                                 rms_cOutput3State 1.3.6.1.4.1.3711.15.1.1.3.3.3 integer read-write
Default State for the output Enumeration: 'on': 1, 'off': 0.
                             rms_cOutputBooleanStates 1.3.6.1.4.1.3711.15.1.1.3.4
                                 rms_cOutput1BooleanState 1.3.6.1.4.1.3711.15.1.1.3.4.1 integer read-only
Set as a result of the AND/OR comparison Enumeration: 'on': 1, 'off': 0.
                                 rms_cOutput2BooleanState 1.3.6.1.4.1.3711.15.1.1.3.4.2 integer read-only
Set as a result of the AND/OR comparison Enumeration: 'on': 1, 'off': 0.
                                 rms_cOutput3BooleanState 1.3.6.1.4.1.3711.15.1.1.3.4.3 integer read-only
Set as a result of the AND/OR comparison Enumeration: 'on': 1, 'off': 0.
                                 rms_cOutput4BooleanState 1.3.6.1.4.1.3711.15.1.1.3.4.4 integer read-only
Set as a result of the AND/OR comparison Enumeration: 'on': 1, 'off': 0.
                             rms_cOutputOnDelay 1.3.6.1.4.1.3711.15.1.1.3.5
                                 rms_cOutput1OnDelay 1.3.6.1.4.1.3711.15.1.1.3.5.1 integer read-write
Delay in seconds for the activation of the output in response to a change into the on state
                                 rms_cOutput2OnDelay 1.3.6.1.4.1.3711.15.1.1.3.5.2 integer read-write
Delay in seconds for the activation of the output in response to a change into the on state
                                 rms_cOutput3OnDelay 1.3.6.1.4.1.3711.15.1.1.3.5.3 integer read-write
Delay in seconds for the activation of the output in response to a change into the on state
                                 rms_cOutput4OnDelay 1.3.6.1.4.1.3711.15.1.1.3.5.4 integer read-write
Delay in seconds for the activation of the output in response to a change into the on state
                             rms_cOutputOffDelay 1.3.6.1.4.1.3711.15.1.1.3.6
                                 rms_cOutput1OffDelay 1.3.6.1.4.1.3711.15.1.1.3.6.1 integer read-write
Delay in seconds for the activation of the output in response to a change into the OFF state
                                 rms_cOutput2OffDelay 1.3.6.1.4.1.3711.15.1.1.3.6.2 integer read-write
Delay in seconds for the activation of the output in response to a change into the OFF state
                                 rms_cOutput3OffDelay 1.3.6.1.4.1.3711.15.1.1.3.6.3 integer read-write
Delay in seconds for the activation of the output in response to a change into the OFF state
                                 rms_cOutput4OffDelay 1.3.6.1.4.1.3711.15.1.1.3.6.4 integer read-write
Delay in seconds for the activation of the output in response to a change into the OFF state
                             rms_cOutputStrings 1.3.6.1.4.1.3711.15.1.1.3.7
                                 rms_cOutput1BooleanInput 1.3.6.1.4.1.3711.15.1.1.3.7.1 displaystring read-write
Tn=temperature source, n is one of the following subindex:1->Temp1 LCL,2->Temp1 LWL, 3->Temp1 UWL,4->Temp1 UCL,5->Temp2 LCL,6->Temp2 LWL,7->Temp2 UWL,8->Temp2 UCL. Cn=contact source, n is the contact order number. No spaces used. Max 12 inputs
                                 rms_cOutput2BooleanInput 1.3.6.1.4.1.3711.15.1.1.3.7.2 displaystring read-write
Tn=temperature source, n is one of the following subindex:1->Temp1 LCL,2->Temp1 LWL, 3->Temp1 UWL,4->Temp1 UCL,5->Temp2 LCL,6->Temp2 LWL,7->Temp2 UWL,8->Temp2 UCL. Cn=contact source, n is the contact order number. No spaces used. Max 12 inputs
                                 rms_cOutput3BooleanInput 1.3.6.1.4.1.3711.15.1.1.3.7.3 displaystring read-write
Tn=temperature source, n is one of the following subindex:1->Temp1 LCL,2->Temp1 LWL, 3->Temp1 UWL,4->Temp1 UCL,5->Temp2 LCL,6->Temp2 LWL,7->Temp2 UWL,8->Temp2 UCL. Cn=contact source, n is the contact order number. No spaces used. Max 12 inputs
                                 rms_cOutput4BooleanInput 1.3.6.1.4.1.3711.15.1.1.3.7.4 displaystring read-write
Tn=temperature source, n is one of the following subindex:1->Temp1 LCL,2->Temp1 LWL, 3->Temp1 UWL,4->Temp1 UCL,5->Temp2 LCL,6->Temp2 LWL,7->Temp2 UWL,8->Temp2 UCL. Cn=contact source, n is the contact order number. No spaces used. Max 12 inputs
                             rms_cOutputBooleanSelector 1.3.6.1.4.1.3711.15.1.1.3.8
                                 rms_cOutput1BooleanSelector 1.3.6.1.4.1.3711.15.1.1.3.8.1 integer read-write
Set 0 to select OR, and 1 to select AND Enumeration: 'and': 1, 'or': 0.
                                 rms_cOutput2BooleanSelector 1.3.6.1.4.1.3711.15.1.1.3.8.2 integer read-write
Set 0 to select OR, and 1 to select AND Enumeration: 'and': 1, 'or': 0.
                                 rms_cOutput3BooleanSelector 1.3.6.1.4.1.3711.15.1.1.3.8.3 integer read-write
Set 0 to select OR, and 1 to select AND Enumeration: 'and': 1, 'or': 0.
                                 rms_cOutput4BooleanSelector 1.3.6.1.4.1.3711.15.1.1.3.8.4 integer read-write
Set 0 to select OR, and 1 to select AND Enumeration: 'and': 1, 'or': 0.
                             rms_cOutputOFFtoONtraps 1.3.6.1.4.1.3711.15.1.1.3.9
                                 rms_cOutput1OFFtoONtrap 1.3.6.1.4.1.3711.15.1.1.3.9.1 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cOutput2OFFtoONtrap 1.3.6.1.4.1.3711.15.1.1.3.9.2 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cOutput3OFFtoONtrap 1.3.6.1.4.1.3711.15.1.1.3.9.3 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                 rms_cOutput4OFFtoONtrap 1.3.6.1.4.1.3711.15.1.1.3.9.4 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                             rms_cOutputOFFtoONrepeatTimers 1.3.6.1.4.1.3711.15.1.1.3.10
                                   rms_cOutput1OFFtoONrep 1.3.6.1.4.1.3711.15.1.1.3.10.1 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                   rms_cOutput2OFFtoONrep 1.3.6.1.4.1.3711.15.1.1.3.10.2 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                   rms_cOutput3OFFtoONrep 1.3.6.1.4.1.3711.15.1.1.3.10.3 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                   rms_cOutput4OFFtoONrep 1.3.6.1.4.1.3711.15.1.1.3.10.4 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                             rms_cOutputONtoOFFtraps 1.3.6.1.4.1.3711.15.1.1.3.11
                                   rms_cOutput1ONtoOFFtrap 1.3.6.1.4.1.3711.15.1.1.3.11.1 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                   rms_cOutput2ONtoOFFtrap 1.3.6.1.4.1.3711.15.1.1.3.11.2 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                   rms_cOutput3ONtoOFFtrap 1.3.6.1.4.1.3711.15.1.1.3.11.3 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                                   rms_cOutput4ONtoOFFtrap 1.3.6.1.4.1.3711.15.1.1.3.11.4 integer read-write
Set to 0 for trap disabled, 1 for enabled Enumeration: 'disabled': 0, 'enabled': 1.
                             rms_cOutputONtoOFFrepeatTimers 1.3.6.1.4.1.3711.15.1.1.3.12
                                   rms_cOutput1ONtoOFFrep 1.3.6.1.4.1.3711.15.1.1.3.12.1 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                   rms_cOutput2ONtoOFFrep 1.3.6.1.4.1.3711.15.1.1.3.12.2 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                   rms_cOutput3ONtoOFFrep 1.3.6.1.4.1.3711.15.1.1.3.12.3 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds
                                   rms_cOutput4ONtoOFFrep 1.3.6.1.4.1.3711.15.1.1.3.12.4 integer read-write
Set to 0 for no repetion after the first trap is sent, any other integer for the interval in seconds