RDN-CHASSIS-MIB: View SNMP OID List / Download MIB

VENDOR: RIVERDELTA NETWORKS


 Home MIB: RDN-CHASSIS-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-MIB, RDN-MIB, SNMPv2-SMI, SNMPv2-TC, DOCS-CABLE-DEVICE-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rdnChassis 1.3.6.1.4.1.4981.1
MIB module for Motorola Chassis. Copyright (C) 2001, 2008 by Motorola, Inc. All rights reserved.
     chassisNotificationObject 1.3.6.1.4.1.4981.1.0
         chassisPowerFailureTrapInfo 1.3.6.1.4.1.4981.1.0.1 integer no-access
Indicates the location of the Power Failure. Enumeration: 'powerFailureA': 1, 'powerFailureB': 2, 'powerRestoredA': 3, 'powerRestoredB': 4.
         chassisPowerFailureTrap 1.3.6.1.4.1.4981.1.0.2
A chassisPowerFailureTrap is generated when a Power Failure is detected in the system
         chassisFanFailureTrapInfo 1.3.6.1.4.1.4981.1.0.3 integer no-access
Indicates the location of the Fan Failure. Enumeration: 'upperFanFailure': 1, 'lowerFanFailure': 2.
         chassisFanFailureTrap 1.3.6.1.4.1.4981.1.0.4
A chassisFanFailureTrap is generated when a Fan Failure is detected in the system
         rdnRedundancyFailedSlotNumber 1.3.6.1.4.1.4981.1.0.5 integer32 no-access
Chassis slot number that failed, or -1 if neither applicable nor determinable.
         rdnRedundancyBackupSlotNumber 1.3.6.1.4.1.4981.1.0.6 integer32 no-access
Slot number of the backup card that took over for the failed card, or -1 if neither applicable nor determinable.
         rdnBSRSrmSwitchoverTrap 1.3.6.1.4.1.4981.1.0.7
An SRM Card has failed, and a switchover has occurred to a redundant SRM card.
         rdnLinkUpTrap 1.3.6.1.4.1.4981.1.0.8
A proprietary Link Up Notification for all interfaces. This notification contains more details than the standard 'linkUp' notification in RFC 2863.
         rdnLinkDownTrap 1.3.6.1.4.1.4981.1.0.9
A proprietary Link Down Notification for all interfaces. This notification contains more details than the standard 'linkDown' notification in RFC 2863.
         rdnBsrTestTrap 1.3.6.1.4.1.4981.1.0.10
This is convenient test trap that Service personnel can generate manually, in debug mode, from the CLI, for diagnostic purposes ('generate snmp-trap [severity]'). Varbinds are docsDevEvLevel = trap severity level, and sysDescr = system description.
     rdnChassisType 1.3.6.1.4.1.4981.1.1 integer read-only
Chassis type. Enumeration: 'osr2000': 4, 'unknown': 1, 'bsr64000': 2, 'bsr1000': 3.
     rdnChassisVersion 1.3.6.1.4.1.4981.1.2 displaystring read-only
Chassis hardware revision level, or an empty string if unavailable.
     rdnChassisId 1.3.6.1.4.1.4981.1.3 displaystring read-write
Unique ID string. Defaults to chassis serial number if available, otherwise empty. Can also be set with 'snmp-server chassis-id'.
     rdnProcessorRam 1.3.6.1.4.1.4981.1.4 integer32 read-only
Megabytes of RAM available to CPU.
     rdnNvRAMSize 1.3.6.1.4.1.4981.1.5 integer32 read-only
Bytes of non-volatile configuration memory.
     rdnNvRAMUsed 1.3.6.1.4.1.4981.1.6 integer32 read-only
Bytes of non-volatile configuration memory in use.
     rdnFlashSize 1.3.6.1.4.1.4981.1.7 integer32 read-only
Bytes flash memory.
     rdnCardTable 1.3.6.1.4.1.4981.1.8 no-access
Chassis card table.
         rdnCardEntry 1.3.6.1.4.1.4981.1.8.1 no-access
Chassis card table.
             rdnCardIndex 1.3.6.1.4.1.4981.1.8.1.1 unsigned32 no-access
Index into cardTable (not physical chassis slot number).
             rdnCardType 1.3.6.1.4.1.4981.1.8.1.2 integer read-only
Functional type of this card. Enumeration: 'unknown': 1, 'io': 3, 'srm': 2.
             rdnCardDescr 1.3.6.1.4.1.4981.1.8.1.3 displaystring read-only
Text description of this card.
             rdnCardSerial 1.3.6.1.4.1.4981.1.8.1.4 displaystring read-only
The serial number of this card, or zero if unavailable.
             rdnCardHwVersion 1.3.6.1.4.1.4981.1.8.1.5 displaystring read-only
Hardware revision level of this card, or an empty string if unavailable.
             rdnCardSwVersion 1.3.6.1.4.1.4981.1.8.1.6 displaystring read-only
Version of the firmware or microcode installed on this card, or an empty string if unavailable.
             rdnCardSlotNumber 1.3.6.1.4.1.4981.1.8.1.7 integer32 read-only
Slot number relative to the containing card or chassis, or -1 if neither applicable nor determinable.
             rdnCardContainedByIndex 1.3.6.1.4.1.4981.1.8.1.8 integer32 read-only
cardIndex of the parent card which directly contains this card, or 0 if contained by the chassis, or -1 if not applicable nor determinable.
             rdnCardOperStatus 1.3.6.1.4.1.4981.1.8.1.9 integer read-only
The operational status of the card. cardOperStatus is up when a card is recognized by the device and is enabled for operation. cardOperStatus is down if the card is not recognized by the device, or if it is not enabled for operation. cardOperStatus is standby if the card is enabled and acting as a standby slave. Intermediate stages (rom,flash,diag,boot,config) are also exposed. Enumeration: 'rom': 5, 'standby': 4, 'diag': 7, 'flash': 6, 'boot': 8, 'up': 2, 'down': 3, 'config': 9, 'not-specified': 1.
     rdnChassisSlots 1.3.6.1.4.1.4981.1.9 integer32 read-only
Number of slots in this chassis, or -1 if neither applicable nor determinable.
     rdnSlotTable 1.3.6.1.4.1.4981.1.10 no-access
Chassis slot table.
           rdnSlotEntry 1.3.6.1.4.1.4981.1.10.1 no-access
Chassis slot table.
               rdnSlotIndex 1.3.6.1.4.1.4981.1.10.1.1 integer32 no-access
The index into rdnSlotTable (not physical slot number). This object's instance is always one number greater than the rdnSlotNumber (physical slot number) instance that it indexes.
               rdnSlotType 1.3.6.1.4.1.4981.1.10.1.2 integer read-only
Functional type of this slot. 'io(3)' was used by older agents to report either CMTS, HSIM, or none. Newer agents will no longer report 'io(3)' and instead will use either 'hsim(4)' for HSIM, 'cmts(5)' for CMTS, or 'unkown(1)' for no module present. Enumeration: 'unknown': 1, 'cmts': 5, 'hsim': 4, 'io': 3, 'srm': 2.
               rdnSlotNumber 1.3.6.1.4.1.4981.1.10.1.3 integer32 read-only
The physical chasis slot number relative to the containing card or chassis, or -1 if neither applicable nor determinable.
               rdnSlotOperStatus 1.3.6.1.4.1.4981.1.10.1.4 integer read-only
The operational status of the chassis physical slot. rdnSlotOperStatus is up when a card is recognized by the system and is enabled for operation. rdnSlotOperStatus is down if a card is not present or recognized by the system, or if it is not enabled for operation. rdnSlotOperStatus is standby if the card is enabled and acting as a standby slave. A not-specified state indicates an unknown error condition Enumeration: 'down': 3, 'standby': 4, 'up': 2, 'not-specified': 1.
               rdnOfflineModemCount 1.3.6.1.4.1.4981.1.10.1.5 integer32 read-only
Number of offline modems for this slot
               rdnOnlineModemCount 1.3.6.1.4.1.4981.1.10.1.6 integer32 read-only
Number of online modems for this slot
               rdnActiveModemCount 1.3.6.1.4.1.4981.1.10.1.7 integer32 read-only
Number of active modems for this slot
               rdnRegisteredModemCount 1.3.6.1.4.1.4981.1.10.1.8 integer32 read-only
Number of registered modems for this slot
               rdnProvisionedModemCount 1.3.6.1.4.1.4981.1.10.1.9 integer32 read-only
Number of provisioned modems for this slot
               rdnUnregisteredModemCount 1.3.6.1.4.1.4981.1.10.1.10 integer32 read-only
Number of Unregistered modems for this slot
               rdnResetSlotStats 1.3.6.1.4.1.4981.1.10.1.11 truthvalue read-write
The byte and packet counters for all the cable modems for the given slot are reset by a 'set' of this object to TRUE(1). This object will always return FALSE(2) when read.
               rdnSlotUnerroreds 1.3.6.1.4.1.4981.1.10.1.12 counter32 read-only
Codewords received on this cmts slot without error. This includes all codewords, whether or not they were part of frames destined for this device.
               rdnSlotCorrecteds 1.3.6.1.4.1.4981.1.10.1.13 counter32 read-only
Codewords received on this cmts slot with correctable errors. This includes all codewords, whether or not they were part of frames destined for this device.
               rdnSlotUncorrectables 1.3.6.1.4.1.4981.1.10.1.14 counter32 read-only
Codewords received on this cmts slot with uncorrectable errors. This includes all codewords, whether or not they were part of frames destined for this device.
     rdnCardIfIndexTable 1.3.6.1.4.1.4981.1.11 no-access
Chassis card table.
           rdnCardIfIndexEntry 1.3.6.1.4.1.4981.1.11.1 no-access
Chassis card table.
               rdnCardIfIndex 1.3.6.1.4.1.4981.1.11.1.1 integer32 read-only
matches RFC1213 ifTable IfIndex
               rdnCardIfSlotNumber 1.3.6.1.4.1.4981.1.11.1.2 integer32 read-only
Chassis slot number, or -1 if neither applicable nor determinable.
               rdnCardIfPortNumber 1.3.6.1.4.1.4981.1.11.1.3 integer32 read-only
Chassis port number, unique per port on a given card if available.
               rdnCardIfCardIndex 1.3.6.1.4.1.4981.1.11.1.4 integer32 read-only
cardIndex of the card in the Chassis cardTable which contains this interface.
               rdnCardIfConnectorTypeEnabled 1.3.6.1.4.1.4981.1.11.1.5 integer read-only
Interface connector type currently enabled. Value will be 1 if not known or not used, or 2 if none of this ports' interface connectors are enabled. Enumeration: 'none': 2, 'db-15': 5, 'rj-45': 3, 'db-40': 4, 'not-specified': 1.
               rdnCardIfLinkUpDownEnable 1.3.6.1.4.1.4981.1.11.1.6 integer read-write
This enables and disables the sending of the proprietary notifications 'rdnLinkUpTrap' and 'rdnLinkDownTrap' that provide more information than the standard link up and link down notifications. By default, these traps are disabled. Enumeration: 'disabled': 2, 'enabled': 1.
               rdnCardIfPortType 1.3.6.1.4.1.4981.1.11.1.7 integer read-only
This object is used to identify port types for a given card. This object will report ethernet(1) for SRM ports and HSIM FE ports, gige(2) for GigE ports, cmts(3) for CMTS cards, cmts_dn(4) in case of downstream ports for CMTS cards, cmts_up(5) in case of upstream ports for CMTS cards, cmts_up_log(6) in case of upstream logical channels for CMTS cards, pos(7) for POS cards, lag(8) for Link Aggregation interfaces Enumeration: 'lag': 8, 'pos': 7, 'cmts-up-log': 6, 'cmts-up': 5, 'cmts-dn': 4, 'gige': 2, 'ethernet': 1, 'cmts': 3.
     rdnSysUpTimeAtLastChassisChange 1.3.6.1.4.1.4981.1.12 timeticks read-only
Time in seconds/100 from the last cold start to the last change in the chassis' configuration. This value will be updated whenever the chassis experiences a change in the count, type, or slot position of a card in cardTable.
     rdnSysUpTimeAtLastConfigChange 1.3.6.1.4.1.4981.1.13 timeticks read-only
Time in seconds/100 from the last configuration change in the system. This value will be set back to zero whenever the system experiences a change in the configuration.
     rdnChassisPowerTrapEnable 1.3.6.1.4.1.4981.1.14 integer read-write
This object controls SNMP traps for chassis Power Failure. If its value is set to enabled(1), then traps are generated. If the value is disabled(2), then traps are not generated. By default, this object has the value enabled(1). Enumeration: 'disabled': 2, 'enabled': 1.
     rdnChassisFanTrapEnable 1.3.6.1.4.1.4981.1.15 integer read-write
This object controls SNMP traps for chassis Fan Failure. If its value is set to enabled(1), then traps are generated. If the value is disabled(2), then traps are not generated. By default, this object has the value enabled(1). Enumeration: 'disabled': 2, 'enabled': 1.
     rdnChassisBSRSrmSwitchoverTrapEnable 1.3.6.1.4.1.4981.1.16 integer read-write
This object controls SNMP traps for redundant SRM switchovers. If its value is set to enabled(1), then traps are generated. If the value is disabled(2), then traps are not generated. By default, this object has the value enabled(1). Enumeration: 'disabled': 2, 'enabled': 1.