QB-ETHERNET-MIB: View SNMP OID List / Download MIB

VENDOR: QUANTUM BRIDGE


 Home MIB: QB-ETHERNET-MIB
Download as:   
QUANTUMBRIDGE-REG, SNMPv2-CONF, EtherLike-MIB, SNMPv2-SMI, QB-DWS-MIB, BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 qbEthernetMIB 1.3.6.1.4.1.4323.2.5
This module defines proprietary objects that extend those in IETF's the Ethernet-Like Interface MIB.
     qbDot3Objects 1.3.6.1.4.1.4323.2.5.1
         qbDot3ConfigTable 1.3.6.1.4.1.4323.2.5.1.2 no-access
Quantum Bridge proprietary configuration parameters for ethernet-like interfaces.
             qbDot3ConfigEntry 1.3.6.1.4.1.4323.2.5.1.2.1 no-access
Quantum Bridge proprietary configuration parameters for single ethernet-like interface.
                 qbDot3ConfigSpeed 1.3.6.1.4.1.4323.2.5.1.2.1.1 integer read-write
The configured speed of the interface. This may be set by the administrator or may be the result of auto-negotiation. Enumeration: 'auto': 3, 'mbps100': 2, 'mbps10': 1.
                 qbDot3ConfigDuplexMode 1.3.6.1.4.1.4323.2.5.1.2.1.2 integer read-write
The configured mode of the interface. Enumeration: 'auto': 3, 'full': 1, 'half': 2.
                 qbDot3ConfigEncapsType 1.3.6.1.4.1.4323.2.5.1.2.1.3 qbatmaal5encapstype read-write
The type of data encapsulation used over the AAL5 SSCS layer. The definitions reference RFC 1483 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification.
                 qbDot3ConfigRouterAddress 1.3.6.1.4.1.4323.2.5.1.2.1.4 macaddress read-write
The MAC address of the router that connects to the IOT Ethnernet port. Note that this object is relevant for IOT ports only
                 qbDot3ConfigLoopback 1.3.6.1.4.1.4323.2.5.1.2.1.5 qbdot3loopbacktype read-write
The loopback configuration of this interface. If used in a set it will cause the agent to place the interface in the desired loopback mode. When read, it will return the interface's curretn loopback configuration.
                 qbDot3ConfigEnetAdminMode 1.3.6.1.4.1.4323.2.5.1.2.1.6 object identifier read-write
This object identifies the default administrative baseband MAU type, to be used in conjunction with the operational MAU type denoted by ifMauType. For a detailed description see ifMauDefaultType in RFC2668.
                 qbDot3ConfigEnetType 1.3.6.1.4.1.4323.2.5.1.2.1.7 object identifier read-only
This object identifies the MAU type. For a detailed description see ifMauType in RFC2668.
                 qbDot3ConfigEnetNegMode 1.3.6.1.4.1.4323.2.5.1.2.1.8 integer read-write
This object is used to enable and disable auto-negotiation on a given port. Enumeration: 'enable': 1, 'disable': 2.
     qbDot3Conformance 1.3.6.1.4.1.4323.2.5.2
         qbDot3Compliances 1.3.6.1.4.1.4323.2.5.2.1
             qbDot3Compliance 1.3.6.1.4.1.4323.2.5.2.1.1
The compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB.
         qbDot3Groups 1.3.6.1.4.1.4323.2.5.2.2
             qbDot3Group 1.3.6.1.4.1.4323.2.5.2.2.1
The set of all accessible objects in this MIB.