MPLS-LC-FR-MIB-DRAFT-01: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: MPLS-LC-FR-MIB-DRAFT-01
Download as:   
SNMPv2-CONF, FRAME-RELAY-DTE-MIB, SNMPv2-SMI, MPLS-TC-STD-MIB, MPLS-LSR-STD-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mplsLcFrMIB 1.3.6.1.2.1.10.166.1
This MIB contains managed object definitions for MPLS Label Controlled Frame-Relay interfaces as defined in RFC3034.
     mplsLcFrNotifications 1.3.6.1.2.1.10.166.1.0
     mplsLcFrObjects 1.3.6.1.2.1.10.166.1.1
         mplsLcFrIfConfTable 1.3.6.1.2.1.10.166.1.1.1 no-access
This table specifies per-interface MPLS LC-FR capability and associated information. In particular, this table extends the MPLS-LSR MIB's mplsInterfaceConfTable.
             mplsLcFrIfConfEntry 1.3.6.1.2.1.10.166.1.1.1.1 no-access
An entry in this table is created by an LSR for every interface capable of supporting MPLS LC-FR. Each entry in this table will exist only if a corresponding entry in ifTable and mplsInterfaceConfTable exist. If the associated entries in ifTable and mplsInterfaceConfTable are deleted, the corresponding entry in this table must also be deleted shortly thereafter.
                 mplsLcFrTrafficMinDlci 1.3.6.1.2.1.10.166.1.1.1.1.1 dlci read-only
This is the minimum DLCI value over which this LSR is willing to accept traffic on this interface.
                 mplsLcFrTrafficMaxDlci 1.3.6.1.2.1.10.166.1.1.1.1.2 dlci read-only
This is the max DLCI value over which this LSR is willing to accept traffic on this interface.
                 mplsLcFrCtrlMinDlci 1.3.6.1.2.1.10.166.1.1.1.1.3 dlci read-only
This is the min DLCI value over which this LSR is willing to accept control traffic on this interface.
                 mplsLcFrCtrlMaxDlci 1.3.6.1.2.1.10.166.1.1.1.1.4 dlci read-only
This is the max DLCI value over which this LSR is willing to accept control traffic on this interface.
                 mplsLcFrIfConfRowStatus 1.3.6.1.2.1.10.166.1.1.1.1.5 rowstatus read-only
This is object is used to create and delete entries in this table. When configuring entries in this table, the corresponding corresponding ifEntry and mplsInterfaceConfEntry MUST exist before hand. If an entry is attempted to be created by a manager for a corresponding mplsInterfaceConfEntry that does not support LC-FR, the agent MUST return an inconsistentValue error. If this table is implemented read-only, then the agent must set this object to active(1) when this row is made active. If this table is implemented writable, then an agent MUST not allow modification to its objects once this value is set to active(1).
                 mplsLcFrIfConfStoreType 1.3.6.1.2.1.10.166.1.1.1.1.6 storagetype read-only
This SNMP storage type for this entry. All objects are writable for permanent entries.
     mplsLcFrConformance 1.3.6.1.2.1.10.166.1.2
         mplsLcFrCompliances 1.3.6.1.2.1.10.166.1.2.1
             mplsLcFrModuleCompliance 1.3.6.1.2.1.10.166.1.2.1.1
Compliance statement for agents that support MPLS LC-FR Interfaces.
         mplsLcFrGroups 1.3.6.1.2.1.10.166.1.2.2
             mplsLcFrIfGroup 1.3.6.1.2.1.10.166.1.2.2.1
Collection of objects needed for MPLS LC-FR interface configuration.