MPLS-ID-STD-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: MPLS-ID-STD-MIB
Download as:   
SNMPv2-CONF, MPLS-TC-EXT-STD-MIB, MPLS-TC-STD-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mplsIdStdMIB 1.3.6.1.2.1.10.166.18
This MIB module contains identifier object definitions for MPLS Traffic Engineering in transport networks. Copyright (c) 2015 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
       mplsIdNotifications 1.3.6.1.2.1.10.166.18.0
       mplsIdObjects 1.3.6.1.2.1.10.166.18.1
           mplsIdGlobalId 1.3.6.1.2.1.10.166.18.1.1 mplsglobalid read-write
This object allows the operator or service provider to assign a unique operator identifier, also called the MPLS-TP Global_ID. If this value is used in mplsTunnelExtNodeConfigGlobalId for mapping Global_ID::Node_ID with the local identifier, then this object value MUST NOT be changed.
           mplsIdNodeId 1.3.6.1.2.1.10.166.18.1.2 mplsnodeid read-write
This object allows the operator or service provider to assign a unique MPLS-TP Node_ID. The Node_ID is assigned within the scope of the Global_ID/ICC_Operator_ID. If this value is used in mplsTunnelExtNodeConfigNodeId for mapping Global_ID::Node_ID with the local identifier, then this object value SHOULD NOT be changed. If this value is used in mplsTunnelExtNodeConfigNodeId for mapping ICC_Operator_ID::Node_ID with the local identifier, then this object value MUST NOT be changed.
           mplsIdCc 1.3.6.1.2.1.10.166.18.1.3 mplsccid read-write
This object allows the operator or service provider to assign a Country Code (CC) to the node. Global uniqueness of ICC is assured by concatenating the ICC with a Country Code (CC). If this value is used in mplsTunnelExtNodeConfigCcId for mapping ICC_Operator_ID::Node_ID with the local identifier, then this object value MUST NOT be changed.
           mplsIdIcc 1.3.6.1.2.1.10.166.18.1.4 mplsiccid read-write
This object allows the operator or service provider to assign a unique MPLS-TP ITU-T Carrier Code (ICC) to the node. Together, the CC and the ICC form the ICC_Operator_ID as CC::ICC. If this value is used in mplsTunnelExtNodeConfigIccId for mapping ICC_Operator_ID::Node_ID with the local identifier, then this object value MUST NOT be changed.
       mplsIdConformance 1.3.6.1.2.1.10.166.18.2
           mplsIdCompliances 1.3.6.1.2.1.10.166.18.2.1
               mplsIdModuleFullCompliance 1.3.6.1.2.1.10.166.18.2.1.1
Compliance statement for agents that provide full support of the MPLS-ID-STD-MIB module.
               mplsIdModuleReadOnlyCompliance 1.3.6.1.2.1.10.166.18.2.1.2
Compliance statement for agents that only provide read-only support for the MPLS-ID-STD-MIB module.
           mplsIdGroups 1.3.6.1.2.1.10.166.18.2.2
               mplsIdIpOperatorGroup 1.3.6.1.2.1.10.166.18.2.2.1
The objects in this group are optional for an ICC-based node.
               mplsIdIccOperatorGroup 1.3.6.1.2.1.10.166.18.2.2.2
The objects in this group are optional for an IP-based node.