MICOM-FRAMERELAY-MIB: View SNMP OID List / Download MIB

NAME = ; DESC = The maximum number of DLCIs that \ may be configured for the entire \ box; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = The maximum number of Virtual Ports that \ may be configured for the entire \ box; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = The maximum number of DLCIs that may \ be configured for a Frame Relay line; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = The sysUpTime when the FR Driver was \ initialized; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Total number of Frame Relay Information \ field octets that were sent out all FR \ ports; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Total number of Frame Relay Information \ Field octets that were received across all \ FR ports; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Total number of Frame Relay Frames \ sent out all FR ports; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Total number of Frame Relay Frames \ received in on all FR ports; HELP = CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = This object has been OBSOLETED for software \ releases beginning with Release 3.0. \ Setting this object to reset will reset \ counters in this group; HELP = All objects will be reset in this group \ except mcmFrMaxDLCI, mcmFrMaxVirtualPorts, \ mcmFrMaxDlciPerLine and mcmFrConnectTime \ which are not counters; CAPABILITIES = NET_CFG, VPN_CFG; Enumeration: 'reset': 1, 'other': 2.

NAME = ; DESC = The value of this object designates the \ numbering plan of the DNA; HELP = The number plan is used in conjunction \ with a DNA. This object identifies the \ type of call as E.164 or X.121 ; CAPABILITIES = NET_CFG, VPN_DISP; Enumeration: 'e164': 1, 'x121': 3.

NAME = ; DESC = The number of active PANL DLCI SVCs \ for all FR ports.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = The total number of tunneling PVCs configured.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = The number of active tunneling PVCs configured.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = This object indicates whether the generation of \ Trap messages are enabled/disabled for the FR \ PANL LMI module.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; Enumeration: 'disabled': 2, 'enabled': 1.

NAME = ; DESC = This object indicates whether the generation of \ Trap messages are enabled/disabled for the FR \ MSM module.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; Enumeration: 'disabled': 2, 'enabled': 1.

NAME = ; DESC = This object indicates whether the generation of \ Trap messages are enabled/disabled for the FR \ Core module.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; Enumeration: 'disabled': 2, 'enabled': 1.

NAME = ; DESC = This object indicates whether the generation of \ Trap messages are enabled/disabled for the FR \ Plm module.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; Enumeration: 'disabled': 2, 'enabled': 1.

NAME = ; DESC = Table of physical port entries \ containing flow control info \ and statistics; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Entry for a Frame Relay physical \ port; HELP = Entry for a Frame Relay physical \ port, containing flow control \ information and statistics NOT \ included in the RFC 1315 mib; CAPABILITIES = ;

NAME = ; DESC = The ifIndex of the physical port; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Determines whether or not rate enforcement \ based on congestion should be enforced; HELP = Enabling this feature will allow packets \ exceeding the current allowable rate \ to be dropped if congestion has been \ detected on the network.; CAPABILITIES = ; Enumeration: 'disabled': 2, 'enabled': 1.

NAME = Frame Relay DLCI Throughput; DESC = This object has been DEPRECATED for software \ releases beginning with Release 3.0, and replaced with \ new objects TxThroughput, RxThroughput. \ Default throughput for a PVC; HELP = Defalut throughput used for all \ PVCs on the same frame relay \ physical interface. Will be \ assigned to a PVC when the PVC \ is created. valid if flow cntl \ is enabled. ; CAPABILITIES = ;

NAME = Frame Relay Delta; DESC = Delta time interval to increase or \ decrease the transmit rate by monitoring \ the number of frames rcvd or txd with the \ FECN bit cleared or set; HELP = Default used for adding PVCs. The \ delta time interval to increase or \ decrease the current transmit rate \ based on then number of frames \ received with the FECN bit cleared \ or set. Typically 4 types end-to-end \ transit delay. Used only if flow \ control is enabled. (In 1 second \ units.). Valid if flow cntl is enabled; CAPABILITIES = ;

NAME = ; DESC = Number of consecutive frames received \ with the BECN bit set before reducing \ the transmit rate; HELP = Number of consecutive frames that must \ have BECN bit set before reducing \ transmit rate. Transmit rate is \ increased when S/2 consecutive frames \ are received with teh BECN bit cleared. \ Valid only when flow control is enabled.\ See CCITT Q.922 Appendix I, for the \ method to compute parameter S.\ Valid if flow cntl is enabled; CAPABILITIES = ;

NAME = ; DESC = This object has been DEPRECATED for software \ releases beginning with Release 3.0, and replaced with \ new objects TxMaxFrameSize, RxMaxFrameSize. \ Maximum Transmission Unit Size; HELP = Maximum Packet size that can be \ passed to Frame Relay and will \ be sent across the Frame Relay \ network.; CAPABILITIES = ;

NAME = ; DESC = sysUpTime when the port was created; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Number of PVC LMI frames sent on \ physical port (DLCI 0); HELP = ; CAPABILITIES = ;

NAME = ; DESC = Number of PVC LMI frames received \ on this port (DLCI 0); HELP = ; CAPABILITIES = ;

NAME = ; DESC = Number of XID frames sent on \ this interface; HELP = Valid only if packet negotiation is enabled. \ Network must support XID frames; CAPABILITIES = ;

NAME = ; DESC = Number of XID frames received on \ this interface; HELP = Valid only if packet negotiation is enabled. \ Network must support XID frames; CAPABILITIES = ;

NAME = ; DESC = Number of CLLM frames sent on \ this interface; HELP = Network must support CLLM before \ this feature is enabled; CAPABILITIES = ;

NAME = ; DESC = Number of CLLM frames received on \ this interface; HELP = Network must support CLLM before \ this feature is enabled; CAPABILITIES = ;

NAME = ; DESC = Number of frames received with \ incomplete or missing address \ field; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Number of frames on an unassigned \ or invalid number; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Number of short frames received; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Number of long frames received that \ were too long (larger than MTU); HELP = ; CAPABILITIES = ;

NAME = ; DESC = Number of frames received that were \ ignored (no errors); HELP = ; CAPABILITIES = ;

NAME = ; DESC = Number of XID TM21 timer expirations; HELP = Valid only if MTU negotiation is \ enabled; CAPABILITIES = ;

NAME = ; DESC = Number of flow control (CLLM) timer \ expirations; HELP = Valid only if flow control negotiation is configured; CAPABILITIES = ;

NAME = ; DESC = The status of the PVC LMI (up or down). ; HELP = ; CAPABILITIES = ; Enumeration: 'down': 2, 'up': 1.

NAME = ; DESC = This object has been OBSOLETED for software \ releases beginning with Release 3.0. \ The status of the SVC LMI (up or down). ; HELP = ; CAPABILITIES = ; Enumeration: 'down': 2, 'up': 1.

NAME = ; DESC = Number of active PANL DLCI SVCs on \ this interface.; HELP =; CAPABILITIES = ;

NAME = ; DESC = This object has been DEPRECATED for software \ releases beginning with Release 3.0, and replaced \ with the new object mcmFrPhyPortDataFrames. \ Number of data frames received on all assigned \ DLCIs.; HELP =; CAPABILITIES = ;

NAME = ; DESC = This object has been DEPRECATED for software \ releases beginning with Release 3.0, and replaced \ with the new object mcmFrPhyPortDataFrames. \ Number of data frames sent on all assigned \ DLCIs.; HELP =; CAPABILITIES = ;

NAME = ; DESC = Number of activations received on this interface.; HELP =; CAPABILITIES = ;

NAME = ; DESC = Number of deactivations received on this interface.; HELP =; CAPABILITIES = ;

NAME = ; DESC = Number of OK ACK messages received on this \ interface.; HELP =; CAPABILITIES = ;

NAME = ; DESC = Number of Error ACK messages received on this \ interface.; HELP =; CAPABILITIES = ;

NAME = ; DESC = Number of Unknown messages received on this \ interface.; HELP =; CAPABILITIES = ;

NAME = ; DESC = Number of Error messages received on this \ interface.; HELP =; CAPABILITIES = ;

NAME = ; DESC = Number of data bytes received.; HELP =; CAPABILITIES = ;

NAME = ; DESC = Number of data bytes sent.; HELP =; CAPABILITIES = ;

NAME = Frame Relay DLCI Tx Throughput; DESC = The transmission CIR expressed in bits/sec.; HELP = ; CAPABILITIES = ;

NAME = Frame Relay DLCI Rx Throughput; DESC = The receive CIR expressed in bits/sec.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum transmission FR packet size \ expressed in bytes.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum receive FR packet size \ expressed in bytes.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The rate enforcement enabled or disabled \ parameter for FR congestion management \ processing.; HELP = ; CAPABILITIES = ; Enumeration: 'disabled': 2, 'enabled': 1.

NAME = ; DESC = The transmission committed burst size \ expressed in bits.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The receive committed burst size \ expressed in bits.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The transmission excess burst size \ expressed in bits.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The receive excess burst size \ expressed in bits.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Total number of data frames on all assigned \ DLCIs.; HELP =; CAPABILITIES = ;

NAME = ; DESC = Table that extends the RFC 1315 \ DLCMI table contianing info \ about the PVC LMI; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Entry into the micom PVC LMI \ configuration extensions; HELP = Entry in the PVC Phys Table. \ Additional information required \ (not in RFC 1315 DLCI table); CAPABILITIES = ;

NAME = ; DESC = IfIndex of the physical port; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Indicates whether the local PVC \ LMI is operating in the DTE or \ DCE mode; HELP = In DTE mode the Status Enquiry messages \ will be sent. In DCE mode, Status \ Reports will be sent in response \ to Status Enquiry mesages.; CAPABILITIES = ; Enumeration: 'dce': 2, 'dte': 1.

NAME = ; DESC = Indicates whether the PVC LMI \ should perform both the sending \ of status enquiries and sending \ of status reports; HELP = Must be with bilateral agreement \ with the switch enabled. Switch \ may send status enquiry messages \ as defined for the DTEs and allows\ the DTE to respond with a status \ messages in the same way as switch \ does (in this mode Status Enquiries \ will still be transmitted normally; CAPABILITIES = ; Enumeration: 'false': 2, 'true': 1.

NAME = ; DESC = Table containing the SVC default \ parameters ; HELP = Table containing default SVC \ parameters to be used if none \ are specified when configuring \ an SVC; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Entry into the SVC Default\ parameter table; HELP = Each entry contains the default \ SVC parameters for the specified \ interface; CAPABILITIES = ;

NAME = ; DESC = IfIndex of the physical port \ the SVC information is \ associated with; HELP = ; CAPABILITIES = ;

NAME = ; DESC = SVC LMI Protocol to be used; HELP = All SVC connection setup must \ use the same LMI protocol; CAPABILITIES = ; Enumeration: 'q933svc': 1.

NAME = ; DESC = The duration, in seconds, \ of the setup timer for SVCs.; HELP = Causes at most one Setup retransmission.\ How long the SVC LMI will wait \ for a response from the network \ (e.g. call proceeding, connect) \ before the setup message will be \ retransmitted. In 1 second unit. \ Q.931 recommends 4 seconds; CAPABILITIES = ;

NAME = ; DESC = The duration of the Disconnect \ timer (in seconds) for SVCs.; HELP = Causes at most one release \ transmission. How long the SVC LMI will wait \ for a release message from the \ network before it will transmit \ a release message. (The SVC LMI \ will then wait for a release \ message from the network.) In 1 second \ unit. Q.931 recommends 30 seconds; CAPABILITIES = ;

NAME = ; DESC = The duration of Release timer (in \ seconds) for SVCs.; HELP = Causes at most one release transmission. \ How long the SVC LMI will wait \ for a response from the network \ before the release message will \ be retransmitted. (When the \ second release is transmitted, \ the local SVC LMI considers \ the corresponding SVC to have \ been released by the network \ as well - even if no response \ is received.) In 1 second units. \ Q.931 recommends 4 seconds; CAPABILITIES = ;

NAME = ; DESC = The duration of Connect Timer (in seconds) \ for SVCs.; HELP = Causes connection disconnection. \ How long the SVC LMI will wait \ (in seconds) for a Connect message \ (after receiving the Call Proceeding \ message) before sending a Release \ message. In 1 second units. Q.931 \ recommends a duration between 30\ to 120 seconds on the DTE side and \ 10 seconds on the DC#E side; CAPABILITIES = ;

NAME = ; DESC = Maximum number of SVC Connections; HELP = The sum of both the incoming and outgoing SVCs; CAPABILITIES = ;

NAME = ; DESC = Default Maximum transmit frame size, \ in bytes, to negotiate with the remote; HELP = This value will be used only if a \ specific value is not included in the \ Connect Request primitive. A value of \ 0 indicates the network default values \ are to be used (unless it is passed down \ at connect time). Expressed in bytes. CAPABILITIES = ;

NAME = ; DESC = Maximum receive frame size in bytes; HELP = Default value for the maximum receive \ frame size to negotiate with the remote. \ This value will be used only if a \ specific value is not included in the \ Connect Request primitive. A value of \ 0 indicates the network default values \ are to be used (unless it is passed down \ at connect time). Expressed in bytes. CAPABILITIES = ;

NAME = ; DESC = Lowest DLCI value for SVCs on \ this network link; HELP = This value applies only to SVC connections. \ PVC DLCI connections may be established \ above or below this value.; CAPABILITIES = ;

NAME = ; DESC = Highest DLCI value for SVCs on \ the this network; HELP = This value applies only to SVC connections. \ PVC DLCI connections may be established \ above or below this value.; CAPABILITIES = ;

NAME = ; DESC = Minimum transmit throughput in \ bits per seconds; HELP = To negotiate with the remote when used with the \ maximum transmit throughput \ unless overwritten at connect time. \ A value of 0 indicates the network \ default values are to be used; CAPABILITIES = ;

NAME = ; DESC = Minimum receive throughput in \ bits per seconds; HELP = To negotiate with the remote when used with the \ maximum receive throughput \ unless overwritten at connect time. \ A value of 0 indicates the network \ default values are to be used; CAPABILITIES = ;

NAME = ; DESC = Maximum transmit throughput in \ bits per seconds; HELP = To negotiate with the remote when used with the \ minimum transmit throughput \ unless overwritten at connect time. \ A value of 0 indicates the network \ default values are to be used; CAPABILITIES = ;

NAME = ; DESC = Maximum receive throughput in \ bits per seconds; HELP = To negotiate with the remote when used with the \ minimum receive throughput \ unless overwritten at connect time. \ A value of 0 indicates the network \ default values are to be used; CAPABILITIES = ;

NAME = ; DESC = Transmit burst size in bytes; HELP = Default Committed Transmit burst \ size, in bytes, to negotiate with \ the remote unless overwritten at \ connect time. A value of 0 \ indicates the network default \ values are to be used; CAPABILITIES = ;

NAME = ; DESC = Receive burst size in bytes; HELP = Default Committed Receive burst \ size, in bytes, to negotiate with \ the remote unless overwritten at \ connect time. A value of 0 \ indicates the network default \ values are to be used; CAPABILITIES = ;

NAME = ; DESC = Excess transmit burst size in bytes; HELP = Default Uncommitted Transmit burst \ size, in bytes, to negotiate with \ the remote unless overwritten at \ connect time. A value of 0 \ indicates the network default \ values are to be used; CAPABILITIES = ;

NAME = ; DESC = Excess receive burst size in bytes; HELP = Default Uncommitted Receive burst \ size, in bytes, to negotiate with \ the remote unless overwritten at \ connect time. A value of 0 \ indicates the network default \ values are to be used; CAPABILITIES = ;

NAME = ; DESC = Table to define the virtual port; HELP = Table to provide the mapping between \ virtual ports and physical ports \ and to define the virtual port \ parameters; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Entry into the Virtual port table; HELP = Each entry in this table contains \ information to define a virtual \ port; CAPABILITIES = ;

NAME = Virtual Port Interface Number; DESC = IfIndex associated with this Virtual Port; HELP = ; CAPABILITIES = ;

NAME = ; DESC = *******NOTE: THIS OBJECT IS OBSOLETE******* This information is no longer useful for \ virtual ports. The virtual ports no longer \ have an underlying network. Only SVC DNAs \ and PVC DLCIs are associated with VPs now. \ The underlying MPANL will take care of which \ link the SVC is to be made on and a Physical \ Line IfIndex has been added to the PVCs. VP \ are no longer required to provide the backup \ link support (MPANL now does that).\ IfIndex of the Frame Relay physical \ port for which the virtual port is \ (or will be) linked to; HELP = ; CAPABILITIES = ;

NAME = This object has been OBSOLETED for software \ releases beginning with Release 3.0. \ Virtual Port PPA Number ; DESC = Point of Physical attachment for \ this Virtual Port; HELP = ; CAPABILITIES = ;

NAME = Virtual Port Mode; HELP = Mode of the virtual port; DESC = Easy Routing requires that data \ will be switched between the \ Virtual Circuits on the this \ virutal port. Basic mode turns \ off the switching mode; CAPABILITIES = ; Enumeration: 'easyRouting': 2, 'basic': 1.

NAME = Virtual Port State; DESC = State of the virtual port; HELP = ; CAPABILITIES = ; Enumeration: 'down': 2, 'uninitialized': 3, 'up': 1.

NAME = ; DESC = Virtual port row status; HELP = Indicates whether or not this \ entry is valid; CAPABILITIES = ; Enumeration: 'enable': 1, 'disable': 2.

NAME = ; DESC = Bitmap that contains the protocols bound \ to this Virtual Port.; HELP = ; CAPABILITIES = ; Enumeration: 'ip-and-ipx-configured': 3, 'sNA-configured': 8, 'ip-configured': 1, 'ipx-configured': 2, 'ip-and-ipx-and-bridge-configured': 7, 'ipx-and-bridge-configured': 6, 'ip-and-bridge-configured': 5, 'bridge-configured': 4, 'x25-configured': 9.

NAME = ; DESC = This object indicates the Virtual \ Port Number used as an identifier \ for a Virtual Port. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = Table for SVC to VP bindings; HELP = This table will give the SVC \ DNA address to be bound to the \ specified Virtual Port; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Entry in the SVC to VP binding \ table; HELP = SVC/VP binding entry in the SVC \ binding table. Multiple SVCS \ (DNAs) may be bound to a single \ VP (ifindex); CAPABILITIES = ;

NAME = ; DESC = Virtual Port ifIndex associated \ with this DNA; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Remote DNA to associate SVC with \ the corresponding virtual port; HELP = DNA to be mapped to the \ corresponding virtual port. \ This will be used to create \ an SVC to the corresponding \ remote DNA; CAPABILITIES = ;

NAME = ; DESC = DLCI for the connected SVC; HELP = Valid only when the SVC is up; CAPABILITIES = ;

NAME = ; DESC = Maximum transmit frame size to \ negotiate with the remote (in \ bytes); HELP = This value will override the default values for \ the physical interface. A value \ of 0 indicates the networks default \ values are to be used. Experessed in \ bytes; CAPABILITIES = ;

NAME = ; DESC = Maximum receive frame size to \ negotiate with the remote (in \ bytes); HELP = This value will override the default values for \ the physical interface. A value \ of 0 indicates the networks default \ values are to be used. Experessed in \ bytes; CAPABILITIES = ;

NAME = ; DESC = Minimum transmit throughput in \ bits per second to negotiate with \ the remote; HELP = Used with the maximum transmit throughput. \ This value will override default \ values given for this physical \ interface. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ;

NAME = ; DESC = Minimum receive throughput in \ bits per second to negotiate with \ the remote; HELP = Used with the maximum receive throughput. \ This value will override default \ values given for this physical \ interface. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ;

NAME = ; DESC = Maximum transmit throughput in \ bits per second to negotiate with \ the remote; HELP = Used with the minimum transmit throughput. \ This value will override default \ values given for this physical \ interface. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ;

NAME = ; DESC = Maximum receive throughput in \ bits per second to negotiate with \ the remote; HELP = Used with the minimum receive throughput. \ This value will override default \ values given for this physical \ interface. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ;

NAME = ; DESC = Transmit burst size in bytes; HELP = Committed transmit burst size, \ in bytes, to negotiate with the \ remote. This value will override \ default values entered for the \ network. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ;

NAME = ; DESC = Receive burst size in bytes; HELP = Committed receive burst size, \ in bytes, to negotiate with the \ remote. This value will override \ default values entered for the \ network. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ;

NAME = ; DESC = Excess transmit burst size in bytes; HELP = Uncommitted transmit burst size, \ in bytes, to negotiate with the \ remote. This value will override \ default values entered for the \ network. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ;

NAME = ; DESC = Excess receive burst size in bytes; HELP = Uncommitted transmit burst size, \ in bytes, to negotiate with the \ remote. This value will override \ default values entered for the \ network. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ;

NAME = ; DESC = Transfer priority level for data on \ this SVC; HELP = All data on this SVC will be sent \ through the switches at \ the requested transfer priority level; CAPABILITIES = ;

NAME = ; DESC = Indicates whether or not this entry is \ enabled; HELP = Enabled indicates this entry will be used \ to establish an SVC connection. Disabled \ indicates this entry is to be ignored when \ establishing SVC connections. This allows \ these SVCs entries to be disabled/enabled \ without having to reenter the entire entry; CAPABILITIES = ; Enumeration: 'enable': 1, 'disable': 2.

NAME = ; DESC = The transfer priority for the corresponding \ pass-through network connection.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The cause code describing the reason that \ the SVC was not established.; \ HELP = ; CAPABILITIES = ; Enumeration: 'resource-unavailable': 47, 'remote-PVC-already-connected-ie-busy': 17, 'no-user-present-in-call': 18, 'protocol-error-unspecified': 111, 'the-PVC-does-not-exist-ie-unassigned': 1, 'element-non-existent-or-not-implemented': 99, 'bearer-capability-not-implemented': 65, 'call-awarded-and-being-delivered-in-an-est-channel': 7, 'message-type-unknown': 97, 'bearer-capability-not-authorized': 57, 'facility-rejected': 29, 'permanent-frame-mode-connection-out-of-service': 39, 'invalid-message-for-state': 101, 'temporary-failure': 41, 'requested-facility-not-subscribed': 50, 'destination-out-of-order': 27, 'incompatible-destination': 88, 'missing-element': 96, 'timer-recovery': 102, 'invalid-call-reference': 81, 'specified-DLCI-unavailable': 44, 'network-out-of-order': 38, 'channel-unacceptable': 6, 'access-information-discarded': 43, 'service-or-option-not-available-unspecified': 63, 'channel-type-not-implemented': 66, 'identified-channel-does-not-exist': 82, 'invalid-number-format': 28, 'permanent-frame-mode-connection-operational': 40, 'invalid-transit-network-selection': 91, 'user-not-member-of-CUG': 87, 'response-to-status-inquiry': 30, 'message-not-compatible': 98, 'normal-unspecified': 31, 'no-route-to-specified-transit-network': 2, 'switching-equipment-congestion': 42, 'non-existent-CUG': 90, 'no-route-to-destination': 3, 'interworking-unspecified': 127, 'no-DLCI-available': 34, 'only-restricted-digital-capability-is-available': 70, 'quality-of-service-not-available': 49, 'invalid-element': 100, 'service-or-option-not-implemented-unspecified': 79, 'invalid-message-unspecified': 95, 'bearer-capability-not-presently-available': 58, 'normal-call-clearing': 16, 'normal-condition': 128, 'remote-PVC-down-ie-unavailable': 21.

NAME = ; DESC = For Software releases beginning with R3.0, \ this object indicates the ifIndex of the tunneling \ PVC in which the SVC is established. Prior to \ R3.0, this object indicates the physical Interface \ this SVC DLCI is associated with.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The discard priority used for connection \ setup of this SVC map.; HELP = ; CAPABILITIES = ; Enumeration: 'medium-discard-level': 2, 'high-discard-level': 3, 'low-discard-level': 1.

NAME = ; DESC = This object indicates the priority of a path at \ call-establishment time, and also determines \ the potential for bumping established paths \ to acquire their bandwidth. A value of 1 is \ the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = This object indicates the priority that a path \ maintains once the path is established, and \ also determines the likelihood of being bumped \ by a new path, thus losing the bandwidth. A value \ of 1 is the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = This table has been OBSOLETED for software \ releases beginning with Release 3.0. \ Table for PVC to VP bindings; HELP = This table will give the PVC \ DLCI address to be bound to the \ specified Virtual Port; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Entry in the PVC to VP binding \ table; HELP = PVC/VP binding entry in the PVC \ binding table. Multiple PVCs \ (DLCIs) may be bound to a single \ VP (ifindex).; CAPABILITIES = ;

NAME = ; DESC = Virtual port ifIndex associated \ with this PVC DLCI; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Local DLCI to the remote that is \ associated with the corresponding \ virtual port; HELP = A DLCI for any given interface \ may be bound to only one virtual \ port; CAPABILITIES = ;

NAME = ; DESC = Indicates the current state of \ the PVC DLCI; HELP = States may be invalid, active or \ inactive; CAPABILITIES = ; Enumeration: 'active': 2, 'inactive': 3, 'invalid': 1.

NAME = ; DESC = Indicates whether or not this entry is \ enabled; HELP = Enabled indicates this entry will be used \ to associate a PVC DLCI with a virtual \ port. Disable indicates this entry is to \ be ignored when mapping PVC dlcis to \ virtual ports. This allows the PVC map \ entries to be disabled/enabled without \ having to reenter the entire entry; CAPABILITIES = ; Enumeration: 'enable': 1, 'disable': 2.

NAME = ; DESC = Physical interface this PVC \ is associated with.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Table of entries for SVCs on this \ access device; HELP = A table containing information \ about specific SVC Data Link \ Connection Identifiers; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = The information regarding a \ single SVC DLCI circuit; HELP = An entry into the SVC circuit \ table; CAPABILITIES = ;

NAME = ; DESC = The ifIndex Value of the ifEntry \ this SVC virtual circuit is linked with; HELP = The ifIndex for the interface on \ which this PVC belongs; CAPABILITIES = ;

NAME = ; DESC = The destination DNA for the SVC; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The Data Link Connection Identifier \ for this virtual circuit; HELP = The local DLCI for this SVC, valid \ only when the connection has been \ established; CAPABILITIES = ;

NAME = ; DESC = Indication for the state of this SVC (active \ or inactive). HELP = Only the configured SVCs can be in \ the inactive state (all learned \ SVCs will be deleted when the connection \ has been released); CAPABILITIES = ; Enumeration: 'active': 2, 'inactive': 3, 'invalid': 1.

NAME = ; DESC = Number of frames received from \ the network indicating forward \ congestion.; HELP = Number of Frame Relay Packets \ received on the corresponding \ DLCI with the Forward congestion \ bit set since this SVC was created; CAPABILITIES = ;

NAME = ; DESC = Number of frames received from \ the network indicating backward \ congestion; HELP = Number of Frame Relay Packets received \ on the corresponding interface with the \ backwards congestion bit set since this \ SVC was created.; CAPABILITIES = ;

NAME = ; DESC = The number of frames sent from \ this switched virtual circuit \ since this was counter was last \ reset; HELP = Number of Frame Relay Packets sent \ on the corresponding SVC since this \ counter was last reset (either by \ reboot of access device or a counter reset \ initiated by a user...Note that user initiated \ counter resets have been OBSOLETED for \ software releases beginning with Release 3.0.); CAPABILITIES = ;

NAME = ; DESC = The number of octets sent from \ this switched virtual circuit since \ it was last created or reset; HELP = Number of bytes sent on the \ corresponding SVC since this counter \ was last reset (either by reboot of access device \ or a counter reset initiated by a user...Note that \ user initiated counter resets have been OBSOLETED \ for software releases beginning with Release 3.0.); CAPABILITIES = ;

NAME = ; DESC = Number of frames received over \ this virtual circuit since it \ was created or the counter was \ last reset; HELP = Number of Frame Relay Packets received \ on the corresponding SVC since this \ counter was last reset (either by reboot \ or a counter reset initiated by a user...Note that \ user initiated counter resets have been OBSOLETED \ for software releases beginning with Release 3.0.); CAPABILITIES = ;

NAME = ; DESC = Number of octets received over \ this virtual circuit since it \ was created or the counter was \ last reset; HELP = Number of octets received \ on the corresponding SVC since this \ counter was last reset (either by reboot \ or a counter reset initiated by a user...Note that \ user initiated counter resets have been OBSOLETED \ for software releases beginning with Release 3.0.); CAPABILITIES = ;

NAME = ; DESC = The value of sysUpTime when the \ switched virtual circuit was \ created.;; HELP = The sysUpTime when the SVC was created \ either at bootup time or when the SVC \ was set up through Q.933, whether by the \ Data Link Connection Management Interface or \ by a SetRequest; CAPABILITIES = ;

NAME = ; DESC = DNA of the SVC call originator.; HELP = DNA of the node that originated \ the call that resulted in \ the establishment of the SVC; CAPABILITIES = ;

NAME = ; DESC = The value of sysUpTime when the state \ of the SVC last changed.; HELP = The sysUpTime of the last status change \ in the SVC. (For SVCs established by the \ remote, the last time change should be \ equal to the SVC creation time); CAPABILITIES = ;

NAME = ; DESC = *******NOTE: THIS OBJECT IS DEPRECATED******* \ This information is redundant. It has been replaced by mcmFrSVCCircuitNedTxThroughput and mcmFrCircuitNexRxThroughput which are objects \ from this same table(mcmFrSVCCircuitTable).;\ Maximum amount of data that the network agrees \ transfer under normal conditions over a set \ measurement interval.; HELP = The maximum rate at which the network \ agrees to transfer under normal (non- \ congested) conditions (expressed in bits \ per second).; CAPABILITIES = ;

NAME = ; DESC = *******NOTE: THIS OBJECT IS DEPRECATED*******\ This information is redundant. It has been replaced by mcmFrSVCCircuitNegTxExceess and \ and mcmFrSVCCircuitNegRxExceess which are objects \ from this same table.(mcmFrSVCCircuitTable);\ The maximum number of uncommited bits \ that the frame relay network will attempt \ to deliver (expressed in bits per second).; \ HELP = This variable indicates the maximum \ amount of uncommitted data bits \ that the network will attempt to \ deliver over the measurement interval. \ By default, if not configured when \ creating the entry, the Excess \ information Burst Size is set \ to the value of ifSpeed; CAPABILITIES = ;

NAME = ; DESC = The average number of 'Frame Relay \ Information Field' bits transferred \ per second across a physical frame relay \ interface.; HELP = Throughput is the average number of \ 'Frame Relay Information Field' \ bits transferred per second across a \ user network interface in one \ direction, measured over the \ measurement interval. If the configured \ commited burst rate and throughput \ are both non-zero, the measurement interval \ T=mcmFrSVCCircuitCommittedBurst/mcmFrSVC- \ CircuitThroughput. If the configured \ committed burst rate and throughput are \ both zero, the measurement interval\ T=mcmFrSVCCircuitExcessBurst/ifSpeed; CAPABILITIES = ;

NAME = ; DESC = The negotiated maximum Tx size to \ be sent on this interface (in bytes).; HELP =; CAPABILITIES = ;

NAME = ; DESC = The negotiated maximum Rx size to \ be received on this interface (in bytes).; HELP =; CAPABILITIES = ;

NAME = ; DESC = The negotiated Tx throughput to \ be sent on this interface (in bits/sec).; HELP =; CAPABILITIES = ;

NAME = ; DESC = The negotiated Rx throughput to \ be received on this interface (in bits/sec).; HELP =; CAPABILITIES = ;

NAME = ; DESC = The negotiated Tx committed burst to \ be sent on this interface (in bits/sec).; HELP =; CAPABILITIES = ;

NAME = ; DESC = The negotiated Rx committed burst to \ be received on this interface (in bits/sec).; HELP =; CAPABILITIES = ;

NAME = ; DESC = The negotiated Tx excess burst to \ be sent on this interface (in bits/sec).; HELP =; CAPABILITIES = ;

NAME = ; DESC = The negotiated Rx excess burst to \ be received on this interface (in bits/sec).; HELP =; CAPABILITIES = ;

NAME = ; DESC = The number of packets that have been discarded \ due to policing of the CIR.; HELP =; CAPABILITIES = ;

NAME = ; DESC = The transfer priority used for connection \ setup of this SVC.; HELP =; CAPABILITIES = ;

NAME = ; DESC = For Software releases beginning with R3.0, \ this object indicates the ifIndex of the tunneling \ PVC in which the SVC is established. Prior to \ R3.0, this object indicates the physical interface \ this SVC DLCI is assoiciated with.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The discard priority used for SVC circuit \ connection setup of this SVC map.; HELP = ; CAPABILITIES = ; Enumeration: 'medium-discard-level': 2, 'high-discard-level': 3, 'low-discard-level': 1.

NAME = ; DESC = This object indicates the priority of a path at \ call-establishment time, and also determines \ the potential for bumping established paths \ to acquire their bandwidth. A value of 1 is \ the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = This object indicates the priority that a path \ maintains once the path is established, and \ also determines the likelihood of being bumped \ by a new path, thus losing the bandwidth. A value \ of 1 is the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum number of DLCI that \ may be configured for the entire \ access device; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = The maximum number of ports that \ may be configured for the entire \ access device; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = The maximum number of DLCIs that may \ be configured for a Frame Relay line; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = The value of this object designates the \ numbering plan of the DNA; HELP = The number plan is used in conjunction \ with a DNA. This object identifies the \ type of call as E.164 or X.121; CAPABILITIES = NET_CFG, VPN_DISP; Enumeration: 'e164': 1, 'x121': 3.

NAME = ; DESC = This object specifies whether the generation of \ Trap messages are enabled/disabled for the FR \ PANL LMI module.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; Enumeration: 'disabled': 2, 'enabled': 1.

NAME = ; DESC = This object specifies whether the generation of \ Trap messages are enabled/disabled for the FR \ MSM module.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; Enumeration: 'disabled': 2, 'enabled': 1.

NAME = ; DESC = This object specifies whether the generation of \ Trap messages are enabled/disabled for the FR \ Core module.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; Enumeration: 'disabled': 2, 'enabled': 1.

NAME = ; DESC = This object specifies whether the generation of \ Trap messages are enabled/disabled for the FR \ Plm module.; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP; Enumeration: 'disabled': 2, 'enabled': 1.

NAME = ; DESC = Table of physical port entries \ contianing flow control info and \ statistics; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Entry for a Frame Relay physical \ port; HELP = Entry for a Frame Relay physical \ port, containing flow control \ information and statistics NOT \ included in the RFC 1315 mib; CAPABILITIES = ;

NAME = ; DESC = IfIndex of the physical port the \ extention information (this entry) \ is associated with; HELP = ; CAPABILITIES = ;

NAME = Frame Relay Flow Control; DESC = Whether or not policing, based on \ congestion should be enforced; HELP = Enabling this feature will allow packets \ exceeding the current allowable rate \ to be dropped if congestion has been \ detected on the network.; CAPABILITIES = ; Enumeration: 'disabled': 2, 'enabled': 1.

NAME = Frame Relay DLCI Throughput; DESC = This object has been DEPRECATED for software \ releases beginning with Release 3.0, and replaced with \ new objects TxThroughput, RxThroughput. \ Default throughput for a PVC; HELP = Defalut throughput used for all \ PVCs on the same frame relay \ physical interface. Will be \ assigned to a PVC when the PVC \ is created. valid if flow cntl \ is enabled ; CAPABILITIES = ;

NAME = Frame Relay Delta; DESC = Delta time interval to increase or \ decrease the transmit rate by \ monitoring the number of frames \ received with the FECN bit cleared \ or set. Note that for software releases \ beginning with R3.0, the range has been \ expanded from (1..100) to (1..255).; HELP = Typically 4 types end-to-end \ transit delay. Used only if flow \ control is enabled. (In 1 second \ units.) Valid if flow cntl is enabled; CAPABILITIES =;

NAME = ; DESC = Number of consecutive frames received \ with the BECN bit set before reducing \ the transmit rate; HELP = Transmit rate is increased \ when S/2 consecutive frames \ are received with teh BECN bit cleared. \ Valid only when flow control is enabled.\ See CCITT Q.922 Appendix I, for the \ method to compute parameter S.; CAPABILITIES = ;

NAME = ; DESC = This object has been DEPRECATED for software \ releases beginning with Release 3.0, and replaced with \ new objects TxMaxFrameSize, RxMaxFrameSize. \ Maximum Transmission Unit Size; HELP = Maximum Packet size that can be \ passed to frame Relay and will \ be sent across the Frame Relay \ network.; CAPABILITIES = ;

NAME = Frame Relay DLCI Tx Throughput; DESC = The transmission CIR expressed in bits/sec.; HELP = ; CAPABILITIES = ;

NAME = Frame Relay DLCI Rx Throughput; DESC = The receive CIR expressed in bits/sec.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum transmission FR packet size \ expressed in bytes.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum receive FR packet size \ expressed in bytes.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The rate enforcement enabled or disabled \ parameter for FR congestion management \ processing.; HELP = ; CAPABILITIES = ; Enumeration: 'disabled': 2, 'enabled': 1.

NAME = ; DESC = The transmission committed burst size \ expressed in bits.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The receive committed burst size \ expressed in bits.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The transmission excess burst size \ expressed in bits.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The receive excess burst size \ expressed in bits.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Table that extends the RFC 1315 \ DLCMI table contianing info \ about the PVC LMI; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Entry into the micom PVC LMI \ configuration extensions; HELP = Entry in the PVC Phys Table. \ Additional information required \ (not in RFC 1315 DLCI table); CAPABILITIES = ;

NAME = ; DESC = IfIndex of the physical port \ the extension information \ is associated with; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Indicates whether the local PVC \ LMI is performing in the DTE or \ DCE mode; HELP = DTE or DCE mode of operation for \ the Frame Relay PVC LMI. (In DTE \ mode the Status Enquiry messages \ will be sent. In DCE mode, Status \ Reports will be sent in response \ to Status Enquiry mesages.; CAPABILITIES = ; Enumeration: 'dce': 2, 'dte': 1.

NAME = ; DESC = Indicates whether the PVC LMI \ should perform both sending \ status enquiries and sending \ status reports; HELP = Must be with bilateral agreement \ with the switch enabled. Switch \ may send status enquiry messages \ as defined for the DTEs and allows \ the DTE to respond with a status \ messages in the same way as switch \ does (in this mode Status Enquiries \ will still be transmitted normally; CAPABILITIES = ; Enumeration: 'false': 2, 'true': 1.

NAME = ; DESC = Table containing the SVC default \ parameters ; HELP = Table containing default SVC \ parameters to be used if none \ are specified when configuring \ an SVC; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Entry into the SVC Default\ parameter table; HELP = Each entry contains the default \ SVC parameters for the specified \ interface; CAPABILITIES = ;

NAME = ; DESC = IfIndex of the physical port \ the SVC information is \ associated with; HELP = ; CAPABILITIES = ;

NAME = ; DESC = SVC LMI Protocol to be used; HELP = SVC LMI Protocol to be used \ on this interface. (All \ SVC connection setup must \ use the same protocol); CAPABILITIES = ; Enumeration: 'q933svc': 1.

NAME = ; DESC = The duration, in seconds, \ of the setup timer for SVCs. \ ; HELP = How long the SVC LMI will wait \ for a response from the network \ (e.g. call proceeding, connect) \ before the setup message will be \ retransmitted. In 1 second unit. \ Q.931 recommends 4 seconds. Causes at \ most one Setup retransmission; CAPABILITIES = ;

NAME = ; DESC = The duration of the Disconnect \ timer (in seconds) for SVCs.; HELP = How long the SVC LMI will wait \ for a release message from the \ network before it will transmit \ a release message. (The SVC LMI \ will then wait for a release \ message from the network.) In 1 second \ unit. Q.931 recommends 30 seconds.\ Causes at most one release \ transmit; CAPABILITIES = ;

NAME = ; DESC = The duration of Release timer. ; HELP = How long the SVC LMI will wait \ for a response from the network \ before the release message will \ be retransmitted. (When the \ second release is transmitted, \ the local SVC LMI considers \ the corresponding SVC to have \ been released by the network \ as well - even if no response \ is received.) In 1 second unit. \ Q.931 recommends 4 seconds. \ Causes at most one release transmit; CAPABILITIES = ;

NAME = ; DESC = The duration of Connect Timer.; HELP = How long the SVC LMI will wait \ (in seconds) for a Connect message \ (after receiving the Call Proceeding \ message) before sending a Release \ message. In 1 second units. Q.931 \ recommends a duration between 30\ to 120 seconds on the DTE side and \ 10 seconds on the DCE side Causes connection disconnection; CAPABILITIES = ;

NAME = ; DESC = Maximum number of SVC Connections; HELP = For all SVCs, including both \ incoming and outgoing; CAPABILITIES = ;

NAME = ; DESC = Default Maximum transmit frame size, \ in bytes, to negotiate with the remote; HELP = This value will be used only if a \ specific value is not included in the \ Connect Request primitive. A value of \ 0 indicates the network default values \ are to be used (unless it is passed down \ at connect time). Expressed in bytes. CAPABILITIES = ;

NAME = ; DESC = Maximum receive frame size in bytes; HELP = Default value for the maximum receive \ frame size to negotiate with the remote \ This value will be used only if a \ specific value is not included in the \ Connect Request primitive. A value of \ 0 indicates the network default values \ are to be used (unless it is passed down \ at connect time). Expressed in bytes. CAPABILITIES = ;

NAME = ; DESC = Lowest DLCI value for SVCs on \ this network; HELP = This value applies only to SVC connections. \ PVC DLCI connections may be established \ above or below this value.; CAPABILITIES = ;

NAME = ; DESC = Highest DLCI value for SVCs on \ the this network; HELP = This value applies only to SVC connections. \ PVC DLCI connections may be established \ above or below this value.; CAPABILITIES = ;

NAME = ; DESC = Minimum transmit throughput in \ bits per seconds; HELP = Minimum transmit throughput in \ bits per second, to negotiate with \ the remote (used along with the \ maximum transmit throughput) \ unless overwritten at connect time. \ A value of 0 indicates the network \ default values are to be used; CAPABILITIES = ;

NAME = ; DESC = Minimum receive throughput in \ bits per seconds; HELP = To negotiate with the remote when used with the \ maximum receive throughput \ unless overwritten at connect time. \ A value of 0 indicates the network \ default values are to be used; CAPABILITIES = ;

NAME = ; DESC = Maximum transmit throughput in \ bits per seconds; HELP = To negotiate with the remote when used with the \ minimum transmit throughput \ unless overwritten at connect time. \ A value of 0 indicates the network \ default values are to be use; CAPABILITIES = ;

NAME = ; DESC = Maximum receive throughput in \ bits per seconds; HELP = To negotiate with the remote when used with the \ minimum receive throughput \ unless overwritten at connect time. \ A value of 0 indicates the network \ default values are to be used; CAPABILITIES = ;

NAME = ; DESC = Transmit burst size in bytes; HELP = Default Committed Transmit burst \ size, in bytes, to negotiate with \ the remote unless overwritten at \ connect time. A value of 0 \ indicates the network default \ values are to be used; CAPABILITIES = ;

NAME = ; DESC = Receive burst size in bytes; HELP = Default Committed Receive burst \ size, in bytes, to negotiate with \ the remote unless overwritten at \ connect time. A value of 0 \ indicates the network default \ values are to be used; CAPABILITIES = ;

NAME = ; DESC = Excess transmit burst size in bytes; HELP = Default Uncommitted Transmit burst \ size, in bytes, to negotiate with \ the remote unless overwritten at \ connect time. A value of 0 \ indicates the network default \ values are to be used; CAPABILITIES = ;

NAME = ; DESC = Excess receive burst size in bytes; HELP = Default Uncommitted Receive burst \ size, in bytes, to negotiate with \ the remote unless overwritten at \ connect time. A value of 0 \ indicates the network default \ values are to be used; CAPABILITIES = ;

NAME = ; DESC = Table to provide the mapping between \ virtual ports and physical ports \ and to define the virtual port \ parameters; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Each entry in this table contains \ information to define a virtual \ port; HELP = ; CAPABILITIES = ;

NAME = Virtual Port Interface Number; DESC = IfIndex associated with this port; HELP = ; CAPABILITIES = ;

NAME = ; DESC = *******NOTE: THIS OBJECT IS OBSOLETE******* This information is no longer useful for \ virtual ports. The virtual ports no longer \ have an underlying network. Only SVC DNAs \ and PVC DLCIs are associated with VPs now. \ The underlying MPANL will take care of which \ link the SVC is to be made on and a Physical \ Line IfIndex has been added to the PVCs. VP \ are no longer required to provide the backup \ link support (MPANL now does that).\ IfIndex of the Frame Relay physical \ port for which the virtual port is \ (or will be) linked to; HELP = ; CAPABILITIES = ;

NAME = This object has been OBSOLETED for software \ releases beginning with Release 3.0. \ Virtual Port PPA Number; DESC = Point of Physical attachment for \ this port; HELP = ; CAPABILITIES = ;

NAME = Virtual Port Mode; HELP = Mode of the virtual port; DESC = Easy Routing requires that data \ will be switched between the \ Virtual Circuits on the this \ virutal port. Basic mode turns \ off the switching mode; CAPABILITIES = ; Enumeration: 'easyRouting': 2, 'basic': 1.

NAME = Virtual Port Mode; DESC = Virtual port row status; HELP = Indicates whether or not this \ entry is valid; CAPABILITIES = ; Enumeration: 'enable': 1, 'disable': 2, 'delete': 3.

NAME = ; DESC = Bitmap that contains the protocols bound. \ to this Virtual Port; HELP = ; CAPABILITIES = ; Enumeration: 'ip-and-ipx-configured': 3, 'sNA-configured': 8, 'ip-configured': 1, 'ipx-configured': 2, 'ip-and-ipx-and-bridge-configured': 7, 'ipx-and-bridge-configured': 6, 'ip-and-bridge-configured': 5, 'bridge-configured': 4, 'x25-configured': 9.

NAME = ; DESC = This object specifies the Virtual \ Port Number used as an identifier \ for a Virtual Port. (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = Table for SVC to VP bindings; HELP = This table will give the SVC \ DNA address to be bound to the \ specified Virtual Port; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Entry in the SVC to VP binding \ table; HELP = SVC/VP binding entry in the SVC \ binding table. Multiple SVCS \ (DNAs) may be bound to a single \ VP (ifindex); CAPABILITIES = ;

NAME = ; DESC = Virtual Port ifIndex associated \ with this DNA; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Remote DNA to associate with \ the corresponding virtual port; HELP = DNA to be mapped to the \ corresponding virtual port. \ This will be used to create \ an SVC to the corresponding \ remote DNA; CAPABILITIES = ;

NAME = ; DESC = Maximum transmit frame size to \ negotiate with the remote (in \ bytes); HELP = This value will override the default values for \ the physical interface. A value \ of 0 indicates the networks default \ values are to be used. Experessed in \ bytes; CAPABILITIES = ;

NAME = ; DESC = Maximum receive frame size to \ negotiate with the remote (in \ bytes); HELP = This value will override the default values for \ the physical interface. A value \ of 0 indicates the networks default \ values are to be used. Experessed in \ bytes; CAPABILITIES = ;

NAME = ; DESC = Minimum transmit throughput in \ bits per second; HELP = Used with the maximum transmit throughput. \ This value will override default \ values given for this physical \ interface. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ;

NAME = ; DESC = Minimum receive throughput in \ bits per second; HELP = Used with the maximum receive throughput. \ This value will override default \ values given for this physical \ interface. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ;

NAME = ; DESC = Maximum transmit throughput in \ bits per second; HELP = Used with the minimum transmit throughput. \ This value will override default \ values given for this physical \ interface. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ;

NAME = ; DESC = Maximum receive throughput in \ bits per second; HELP = Used with the minimum receive throughput. \ This value will override default \ values given for this physical \ interface. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ;

NAME = ; DESC = Transmit burst size in bytes; HELP = Committed transmit busrt size, \ in bytes, to negotiate with the \ remote. This value will override \ default values entered for the \ network. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ;

NAME = ; DESC = Receive burst size in bytes; HELP = Committed receive busrt size, \ in bytes, to negotiate with the \ remote. This value will override \ default values entered for the \ network. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ;

NAME = ; DESC = Excess transmit burst size in bytes; HELP = Uncommitted transmit busrt size, \ in bytes, to negotiate with the \ remote. This value will override \ default values entered for the \ network. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ;

NAME = ; DESC = Excess receive burst size in bytes; HELP = Uncommitted transmit busrt size, \ in bytes, to negotiate with the \ remote. This value will override \ default values entered for the \ network. A value of 0 indicates \ the network default values are to \ be used; CAPABILITIES = ;

NAME = ; DESC = Transfer priority level for data on \ this SVC; HELP = All data on this SVC will be sent \ through the switches at \ the requested transfer priority level; CAPABILITIES = ;

NAME = ; DESC = Indicates whether or not this entry is \ enabled; HELP = Enabled indicates this entry will be used \ to establish an SVC connection. Disabled \ indicates this entry is to be ignored when \ establishing SVC connections. This allows \ these SVCs entries to be disabled/enabled \ without having to reenter the entire entry; CAPABILITIES = ; Enumeration: 'enable': 1, 'disable': 2, 'delete': 3.

NAME = ; DESC = The transfer priority for the corresponding \ pass-through connection. (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = This object is used to add new rows \ in the SVC to VP bindings table, modify existing \ rows,and to delete existing rows (Configuration); HELP = To add a new row, createAndGo (4) is used. \ To modify an existing row, active (1) is \ used. To delete an existing row, \ destroy (6) is used. ; CAPABILITIES = ; Enumeration: 'active': 1, 'destroy': 6, 'createAndGo': 4.

NAME = ; DESC = The discard priority used for connection \ setup of this SVC map.; HELP = ; CAPABILITIES = ; Enumeration: 'medium-discard-level': 2, 'high-discard-level': 3, 'low-discard-level': 1.

NAME = ; DESC = This object specifies the priority of a path at \ call-establishment time, and also determines \ the potential for bumping established paths \ to acquire their bandwidth. A value of 1 is \ the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = This object specifies the priority that a path \ maintains once the path is established, and \ also determines the likelihood of being bumped \ by a new path, thus losing the bandwidth. A value \ of 1 is the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = This table has been OBSOLETED for software \ releases beginning with Release 3.0. \ Table for PVC to VP bindings; HELP = This table will give the PVC \ DLCI address to be bound to the \ specified Virtual Port; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Entry in the PVC to VP binding \ table; HELP = PVC/VP binding entry in the PVC \ binding table. Multiple PVCs \ (DLCIs) may be bound to a single \ VP (ifindex).; CAPABILITIES = ;

NAME = ; DESC = Virtual port ifIndex associated \ with this PVC DLCI; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Local DLCI to the remote that is \ to be associated with the \ corresponding virtual port; HELP = A DLCI for any given interface \ may be bound to only one virtual \ port; CAPABILITIES = ;

NAME = ; DESC = Indicates whether or not this entry is \ enabled; HELP = Enabled indicates this entry will be used \ to associate a PVC DLCI with a virtual \ port. Disable indicates this entry is to \ be ignored when mapping PVC dlcis to \ virtual ports. This allows the PVC map \ entries to be disabled/enabled without \ having to reenter the entire entry; CAPABILITIES = ; Enumeration: 'enable': 1, 'disable': 2, 'delete': 3.

NAME = ; DESC = Physical interface this PVC \ is associated with.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The Parameters for the Data Link Connection \ Management Interface for the frame \ relay service on this interface.; HELP = Table of standard RFC 1315 PVC LMI \ Parameters per interface (physical \ port); CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = The Parameters for a particular Data \ Link Connection Management Interface.; HELP = Entry for the standard RFC 1315 PVC \ LMI parameters for an interface \ (physical port); CAPABILITIES = ;

NAME = ; DESC = The ifIndex of the physical interface \ for the corresponding PVC LMI \ parameters to be updated; HELP = ; CAPABILITIES = ;

NAME = ; DESC = This variable states which Data Link \ Connection Management scheme is \ active (and by implication, what \ DLCI it uses) on the Frame Relay \ interface.; HELP = The type of PVC LMI active on this \ interface. The PVC LMI selected \ must be compatable with the network \ PVC LMI running. (If no PVCs are to \ be used, the 'noLmiConfigured' option \ may be selected.); CAPABILITIES = ; Enumeration: 'lmi': 2, 'noLmiConfigured': 1, 'itut933A': 5, 'ansiT1617D1994': 6.

NAME = ; DESC = This variable states which address \ format is in use on the Frame Relay \ interface.; HELP = Must match the address format used by the \ network; CAPABILITIES = ; Enumeration: 'q921': 1, 'q922': 4, 'q922March90': 2, 'q922November90': 3.

NAME = ; DESC = This variable states which address \ length in octets.; HELP = In the case of \ Q922 format, the length indicates the \ entire length of the address including \ the control portion. Used with \ the address type to identify \ a PVC. This value must match the \ address length used by the network; CAPABILITIES = ; Enumeration: 'two-octets': 2, 'four-octets': 4, 'three-octets': 3.

NAME = ; DESC = This is the number of seconds between \ successive status enquiry messages.; HELP = How often the PVC LMI status enquiry \ messages will be sent on the \ corresponding interface (measured \ in seconds); CAPABILITIES = ;

NAME = ; DESC = Number of status enquiry intervals \ that pass before issuance of a full \ status enquiry message.; HELP = How often a full status enquiry message \ will be sent. Measured in units of \ status enquiry interval. (Every nth \ status enquiry will be a full status \ enquiry.); CAPABILITIES = ;

NAME = ; DESC = This is the maximum number of \ unanswered Status Enquiries the equipment \ shall accept before declaring the LMI \ down.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = This is the number of status polling \ intervals over which the error threshold \ is counted.; HELP = If within \ 'MonitoredEvents' number of events \ the station receives 'ErrorThreshold' \ number of errors, the interface is \ marked as down.; CAPABILITIES = ;

NAME = ; DESC = The maximum number of Virtual Circuits \ allowed for this interface.; HELP = Dictated by the Frame Relay network. In \ response to a SET, if a value less \ than zero or higher than the agent's \ maximal capability is configured, the \ agent should respond bad- Value; CAPABILITIES = ;

NAME = ; DESC = This indicates whether the Frame Relay \ interface is using a multicast service.; HELP = The network \ must support a multicast service; CAPABILITIES = ; Enumeration: 'broadcast': 2, 'nonBroadcast': 1.

NAME = ; DESC = Table of entries for all SVCs on this \ access device.; HELP = A table containing information \ about specific SVC DLCIs; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = The information regarding a \ single, established SVC DLCI; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The ifIndex Value of the ifEntry \ this SVC virtual circuit is associated with; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The local DLCI for this SVC, valid \ only when the connection has been \ established; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The type of this SVC.; HELP = Valid types include voice, switched or \ rfc1490; CAPABILITIES = ; Enumeration: 'rfc1490': 1, 'voice': 2, 'rfc1490switched': 4, 'switched': 3.

NAME = ; DESC = DNA of the destination node associated \ with the SVC; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Indication for the state of this SVC (active \ or inactive).; HELP = Only the configured SVCs \ can be in the inactive state (all learned \ SVCs will be deleted when the connection \ has been released); CAPABILITIES = ; Enumeration: 'active': 2, 'inactive': 3, 'invalid': 1.

NAME = ; DESC = Number of frames received from \ the network indicating forward \ congestion since this switched \ virtual circuit was created; HELP = Number of Frame Relay Packets \ received on the corresponding \ DLCI with the Forward congestion \ bit set; CAPABILITIES = ;

NAME = ; DESC = Number of frames received from \ the network indicating backward \ congestion since this switched \ virtual circuit was created; HELP = Number of Frame Relay Packets received \ on the corresponding interface with the \ backward congestion bit set.; CAPABILITIES = ;

NAME = ; DESC = The number of frames sent from \ this switched virtual circuit \ since this counter was last \ reset; HELP = Number of Frame Relay Packets sent \ on the corresponding SVC since this \ counter was last reset (either by \ reboot of access device or a counter reset \ initiated by a user...Note that \ user initiated counter resets have been OBSOLETED \ for software releases beginning with Release 3.0.); CAPABILITIES = ;

NAME = ; DESC = The number of octets sent from \ this switched virtual circuit since \ it was last created or reset; HELP = Number of bytes sent on the \ corresponding SVC since this counter \ was last reset (either by reboot of access device \ or a counter reset initiated by a user...Note that \ user initiated counter resets have been OBSOLETED \ for software releases beginning with Release 3.0.); CAPABILITIES = ;

NAME = ; DESC = Number of frames received over \ this virtual circuit since it \ was created or the counter was \ last reset; HELP = Reset may occur either by reboot \ or a counter reset initiated by a user...Note that \ user initiated counter resets have been OBSOLETED \ for software releases beginning with Release 3.0.; CAPABILITIES = ;

NAME = ; DESC = Number of octets received over \ this virtual circuit since it \ was created or the counter was \ last reset; HELP = Reset may occur either by reboot \ or a counter reset initiated by a user...Note that \ user initiated counter resets have been OBSOLETED \ for software releases beginning with Release 3.0.; CAPABILITIES = ;

NAME = ; DESC = The value of sysUpTime when the \ switched virtual circuit was \ created; HELP = The sysUpTime when the SVC was created \ either at bootup time or when the SVC \ was set up through Q.933, whether by the Data \ Link Connection Management Interface or \ by a SetRequest; CAPABILITIES = ;

NAME = ; DESC = DNA of the node that originated \ the call that resulted in \ the establishment of the SVC; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The value of sysUpTime when last there was a change in the SVC; HELP = SVCs established by the remote will set \ the last time change to the creation time; CAPABILITIES = ;

NAME = ; DESC = *******NOTE: THIS OBJECT IS DEPRECATED******* \ This information is redundant. This object has been \ replaced by mcmFrAllSVCCircuitNedTxThroughput and \ mcmAllFrCircuitNexRxThroughput which are objects \ from this same table(mcmFrAllSVCCircuitTable).;\ Maximum amount of data that the network agrees \ transfer under normal conditions over a set \ measurement interval.; HELP = The maximum rate at which the network \ agrees to transfer under normal (non- \ congested) conditions (expressed in bits \ per second).; CAPABILITIES = ;

NAME = ; DESC = *******NOTE: THIS OBJECT IS DEPRECATED******* \ This information is redundant. This object has been \ replaced by mcmFrAllSVCCircuitNedTxThroughput and \ mcmAllFrCircuitNexRxThroughput which are objects \ from this same table(mcmFrAllSVCCircuitTable).;\ The maximum number of uncommited bits \ that the frame relay network will attempt \ to deliver (expressed in bits per second).; \ HELP = By default, if not configured when \ creating the entry, the Excess \ information Burst Size is set \ to the value of ifSpeed; CAPABILITIES = ;

NAME = ; DESC = The average number of 'Frame Relay \ Information Field' bits transferred \ per second across a physical frame relay \ interface.; HELP = Throughput is the average number of \ 'Frame Relay Information Field' \ bits transferred per second across a \ user network interface in one \ direction, measured over the set \ measurement interval. If the configured \ commited burst rate and throughput \ are both non-zero, the measurement interval \ T=mcmFrAllSVCCircuitCommittedBurst/mcmFrSVC- \ CircuitThroughput. If the configured \ committed burst rate and throughput are \ both zero, the measurement interval\ T=mcmFrAllSVCCircuitExcessBurst/ifSpeed; CAPABILITIES = ;

NAME = ; DESC = The negotiated maximum Tx size to \ be sent on this interface (in bytes).; HELP =; CAPABILITIES = ;

NAME = ; DESC = The negotiated maximum Rx size to \ be received on this interface (in bytes).; HELP =; CAPABILITIES = ;

NAME = ; DESC = The negotiated Tx throughput to \ be sent on this interface (in bits/sec).; HELP =; CAPABILITIES = ;

NAME = ; DESC = The negotiated Rx throughput to \ be received on this interface (in bits/sec).; HELP =; CAPABILITIES = ;

NAME = ; DESC = The negotiated Tx committed burst to \ be sent on this interface (in bits/sec).; HELP =; CAPABILITIES = ;

NAME = ; DESC = The negotiated Rx committed burst to \ be received on this interface (in bits/sec).; HELP =; CAPABILITIES = ;

NAME = ; DESC = The negotiated Tx excess burst to \ be sent on this interface (in bits/sec).; HELP =; CAPABILITIES = ;

NAME = ; DESC = The negotiated Rx excess burst to \ be received on this interface (in bits/sec).; HELP =; CAPABILITIES = ;

NAME = ; DESC = The number of packets that have been discarded \ due to policing of the CIR.; HELP =; CAPABILITIES = ;

NAME = ; DESC = The transfer priority used for connection \ setup of this SVC.; HELP = Valid priorities are 0 (LAN), 6 (NMSNAS) \ and 11 (voice); CAPABILITIES = ;

NAME = ; DESC = For Software releases beginning with R3.0, \ this object indicates the ifIndex of the tunneling \ PVC in which the SVC is established. Prior to \ R3.0, this object indicates the physical interface \ this SVC DLCI is assoiciated with.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The discard priority used in \ setting the SVC circuit.; HELP = ; CAPABILITIES = ; Enumeration: 'medium-discard-level': 2, 'high-discard-level': 3, 'low-discard-level': 1.

NAME = ; DESC = This object indicates the priority of a path at \ call-establishment time, and also determines \ the potential for bumping established paths \ to acquire their bandwidth. A value of 1 is \ the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = This object indicates the priority that a path \ maintains once the path is established, and \ also determines the likelihood of being bumped \ by a new path, thus losing the bandwidth. A value \ of 1 is the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The Frame Relay LAN SPVC Connections \ table(Operational); HELP = ; CAPABILITIES =NET_CFG, VPN_CFG;

NAME = ; DESC = An entry in the Frame Relay LAN SPVC \ Connections table. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The ifIndex of the local Virtual Port \ (Analogous to the ifIndex pointer in the \ MIB II Interfaces Group, but specific to \ the FR End-to-End Connections table.) (Operationsl); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The DLCI value on the remote DCE interface. HELP = ; CAPABILITIES = ;

NAME = ; DESC = The connect ID of this SPVC mapping.\ Used to associate SVCs and Connect \ mappings.(Operational) HELP = ; CAPABILITIES = ;

NAME = ; DESC = The DNA of the remote node with which \ the SVC will be established. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The DLCI value of the SVC once \ the SVC has been established. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = For Software releases beginning with R3.0, \ this object indicates the ifIndex of the tunneling \ PVC in which the SVC is established. Prior to \ R3.0, this object indicates the ifIndex used for the \ SVC connection. (Operational) HELP = ; CAPABILITIES = ;

NAME = ; DESC = The value of this object indicates \ whether the local Virtual Port with \ this mapping is active or inactive. \ (Operational); HELP = ; CAPABILITIES = ; Enumeration: 'active': 1, 'inactive': 2.

NAME = ; DESC = The value of this object indicates \ whether the local DCE considers the \ SVC associated with this mapping \ active or inactive.(Operational); HELP = ; CAPABILITIES = ; Enumeration: 'active': 1, 'inactive': 2.

NAME = ; DESC = The value of this object indicates \ whether this end of the SPVC segment \ initiated the SVC call.; HELP = ; CAPABILITIES = ; Enumeration: 'master': 2, 'slave': 1.

NAME = ; DESC = The value of MIB II's sysUpTime at \ the time this SVC mapping entered \ its current operations state the \ high to low direction; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The value of this object indicates \ the reason why the SPVC is not \ active. (Operational); HELP = ; CAPABILITIES = ; Enumeration: 'the-SVC-connection-is-down': 4, 'local-VP-is-down': 1, 'remote-PVC-LMI-is-down': 3, 'local-SVC-LMI-is-Down': 2.

NAME = ; DESC = The Frame Relay SVC Connect (Switched) \ Segment Configuration table. HELP = ; CAPABILITIES =NET_CFG, VPN_CFG;

NAME = ; DESC = An entry in the Frame Relay LAN SPVC \ Connections table.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The Connect Id of the Connection \ group entry to which this SVC \ belongs. HELP = ; CAPABILITIES = ;

NAME = ; DESC = For Software releases beginning with R3.0, \ this object indicates the ifIndex of the tunneling \ PVC in which the SVC is established. Prior to \ R3.0, this object indicates the ifIndex of the local \ frame relay physical line interface. HELP = ; CAPABILITIES = ;

NAME = ; DESC = The DNA for the destination of \ the virtual circuit.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The local DLCI for this SVC. \ Valid only when the SVC is \ established. ; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum transmission frame size. \ This should be equal to (or greater \ than) the Rx size for the corresponding \ PVC. Expressed in bytes.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum receivable frame size. \ This should be equal to (or less than) \ the Tx size for the corresponding PVC. \ Expressed in bytes.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The minimum transmission throughput. \ This should be equal to (or greater than) \ the Rx CIR for the corresponding PVC. \ Expressed in bits/sec.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The minimum receive throughput.\ This should be equal to (or less \ than) the Tx CIR for the corresponding \ PVC. Expressed in bits/sec. HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum transmission throughput.\ Always set to the value of \ mcmFrLANSpvcSVCMinTxThroughput.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum receive throughput. \ Always set to the value of \ mcmFrLANSpvcSVCMinRxThroughput.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum transmission burst size \ Computation based on throughput and \ Excess Burst. Expressed in bits/sec.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum receive burst size. \ Computation based on throughput and \ Excess Burst. Expressed in bits/sec.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum number of uncommitted \ bits that the network will attempt \ to accept. This should be equal to \ (or greater than) the Rx Be configured for the corresponding PVC. Expressed in \ bits/sec.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum number of uncommitted bits \ that the network will attempt to deliver. \ This should be equal to (or less than) the \ Tx Be configured for the corresponding PVC \ Expressed in bits/sec.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The transfer priority for the corresponding \ pass-through connection. HELP = ; CAPABILITIES = ;

NAME = ; DESC = The reason for the SVC Disconnect.; HELP = ; CAPABILITIES = ; Enumeration: 'resource-unavailable': 47, 'remote-PVC-already-connected-ie-busy': 17, 'no-user-present-in-call': 18, 'protocol-error-unspecified': 111, 'the-PVC-does-not-exist-ie-unassigned': 1, 'element-non-existent-or-not-implemented': 99, 'bearer-capability-not-implemented': 65, 'call-awarded-and-being-delivered-in-an-est-channel': 7, 'message-type-unknown': 97, 'bearer-capability-not-authorized': 57, 'facility-rejected': 29, 'permanent-frame-mode-connection-out-of-service': 39, 'invalid-message-for-state': 101, 'temporary-failure': 41, 'requested-facility-not-subscribed': 50, 'destination-out-of-order': 27, 'incompatible-destination': 88, 'missing-element': 96, 'timer-recovery': 102, 'invalid-call-reference': 81, 'specified-DLCI-unavailable': 44, 'network-out-of-order': 38, 'channel-unacceptable': 6, 'access-information-discarded': 43, 'service-or-option-not-available-unspecified': 63, 'channel-type-not-implemented': 66, 'identified-channel-does-not-exist': 82, 'invalid-number-format': 28, 'permanent-frame-mode-connection-operational': 40, 'invalid-transit-network-selection': 91, 'user-not-member-of-CUG': 87, 'response-to-status-inquiry': 30, 'message-not-compatible': 98, 'normal-unspecified': 31, 'no-route-to-specified-transit-network': 2, 'switching-equipment-congestion': 42, 'non-existent-CUG': 90, 'no-route-to-destination': 3, 'interworking-unspecified': 127, 'no-DLCI-available': 34, 'only-restricted-digital-capability-is-available': 70, 'quality-of-service-not-available': 49, 'invalid-element': 100, 'service-or-option-not-implemented-unspecified': 79, 'invalid-message-unspecified': 95, 'bearer-capability-not-presently-available': 58, 'normal-call-clearing': 16, 'normal-condition': 128, 'remote-PVC-down-ie-unavailable': 21.

NAME = ; DESC = The discard priority setup for \ the LAN SPVC SVC.; HELP = ; CAPABILITIES = ; Enumeration: 'medium-discard-level': 2, 'high-discard-level': 3, 'low-discard-level': 1.

NAME = ; DESC = This object indicates the priority of a path at \ call-establishment time, and also determines \ the potential for bumping established paths \ to acquire their bandwidth. A value of 1 is \ the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = This object indicates the priority that a path \ maintains once the path is established, and \ also determines the likelihood of being bumped \ by a new path, thus losing the bandwidth. A value \ of 1 is the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The Frame Relay LAN SPVC Connections \ table(Configurational); HELP = ; CAPABILITIES =NET_CFG, VPN_CFG;

NAME = ; DESC = An entry in the Frame Relay LAN SPVC \ Connections table. (Configurational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The ifIndex of the local Virtual Port \ (Analogous to the ifIndex pointer in the \ MIB II Interfaces Group, but specific to \ the FR End-to-End Connections table.); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The DLCI value on the remote DCE interface. HELP = ; CAPABILITIES = ;

NAME = ; DESC = The connect ID of this SPVC mapping.\ Used to associate SVCs and Connect \ mappings.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The DNA of the remote node with which \ the SVC will be established.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The value of this object indicates \ whether this end of the SPVC segment \ initiated the SVC call.; HELP = ; CAPABILITIES = ; Enumeration: 'master': 2, 'slave': 1.

NAME = ; DESC = This object is used to add new rows \ in the connection table, modify \ existing rows and to delete existing \ rows.; HELP = ; CAPABILITIES = ; Enumeration: 'active': 1, 'destroy': 6, 'createAndGo': 4.

NAME = ; DESC = The Frame Relay SVC Connect (Switched) \ Segment Configuration table. HELP = ; CAPABILITIES =NET_CFG, VPN_CFG;

NAME = ; DESC = An entry in the Frame Relay LAN SPVC \ Connections table.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The Connect Id of the Connection \ group entry to which this SVC \ belongs. HELP = ; CAPABILITIES = ;

NAME = ; DESC = The DNA for the destination of \ the virtual circuit.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum transmission frame size. \ This should be equal to (or greater \ than) the Rx size for the corresponding \ PVC. Expressed in bytes.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum receivable frame size. \ This should be equal to (or less than) \ the Tx size for the corresponding PVC. \ Expressed in bytes.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The minimum transmission throughput. \ This should be equal to (or greater than) \ the Rx CIR for the corresponding PVC. \ Expressed in bits/sec.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The minimum receive throughput.\ This should be equal to (or less \ than) the Tx CIR for the corresponding \ PVC. Expressed in bits/sec. HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum transmission throughput.\ Always set to the value of \ nvmFrLANSpvcSVCMinTxThroughput.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum receive throughput. \ Always set to the value of \ nvmFrLANSpvcSVCMinRxThroughput.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum transmission burst size \ Computation based on throughput and \ Excess Burst. Expressed in bits/sec.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum receive burst size. \ Computation based on throughput and \ Excess Burst. Expressed in bits/sec.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum number of uncommitted \ bits that the network will attempt \ to accept. This should be equal to \ (or greater than) the Rx Be configured for the corresponding PVC. Expressed in \ bits/sec.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum number of uncommitted bits \ that the network will attempt to deliver. \ This should be equal to (or less than) the \ Tx Be configured for the corresponding PVC \ Expressed in bits/sec.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The transfer priority for the corresponding \ pass-through connection. HELP = ; CAPABILITIES = ;

NAME = ; DESC = The discard priority setup for \ the LAN SPVC SVC.; HELP = ; CAPABILITIES = ; Enumeration: 'medium-discard-level': 2, 'high-discard-level': 3, 'low-discard-level': 1.

NAME = ; DESC = This object specifies the priority of a path at \ call-establishment time, and also determines \ the potential for bumping established paths \ to acquire their bandwidth. A value of 1 is \ the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = This object specifies the priority that a path \ maintains once the path is established, and \ also determines the likelihood of being bumped \ by a new path, thus losing the bandwidth. A value \ of 1 is the highest priority, and 5 is the lowest.; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Table of entries for Frame Relay Dlcmi SVC \ status for this access device. (Operational); HELP =; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = A row or entry in the Frame Relay Dlcmi SVC \ status Table. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The ifIndex Value associated with the \ netlink. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The SVC DLCI number associated with the \ netlink. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The card number linked to this \ netlink. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The physical port number linked to this \ netlink. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The tunneling PVC DLCI number linked to \ this netlink. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The card number linked to this netlink \ at the other side of the connection. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The physical port number linked to this netlink \ at the other side of the connection. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The tunneling PVC DLCI number linked to this \ netlink at the other side of the connection. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The SVC DLCI number linked to this netlink \ at the other side of the connection. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = Table of entries for Frame Relay Tunnel PVCs \ for this access device. (Operational); HELP =; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = A row or entry in the Frame Relay Tunnel PVC \ Table. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The ifIndex of the tunnel PVC itself. \ (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The DLCI number for this PVC tunnel. \ (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The Card (Logical Interface Module - LIM) \ of the WAN port (physical FR link). \ (Operational); HELP = ; CAPABILITIES = ; Enumeration: 'lim2': 3, 'lim3': 4, 'lim1': 2, 'limA': 1, 'lim4': 5.

NAME = ; DESC = The channel number of this WAN port. \ (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The FR tunnel PVC type. (Operational); HELP = ; CAPABILITIES = ; Enumeration: 'dte-panl': 1, 'dce-panl': 2, 'standard': 3.

NAME = ; DESC = The ifIndex of the FR physical port. \ (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum receive frame size in \ octets for this PVC tunnel data (sent into \ this unit). (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The receive committed burst size (Bc) in bits \ for this PVC tunnel data (sent into this unit). \ (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The receive excess burst size (Be) in bits \ for this PVC tunnel data (sent into this unit). \ (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum received throughput in \ bits per second. Used for FECN/BECN \ management. (Operation); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum transmission frame size in \ octets for this PVC tunnel data (sent out of \ this unit). (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The transmission committed burst size (Bc) in bits \ for this PVC tunnel data (sent out of this unit). \ (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The transmission excess burst size (Be) in bits \ for this PVC tunnel data (sent out of this unit). \ (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum transmit throughput in \ bits per second. Used for FECN/BECN \ management. (Operation); HELP = ; CAPABILITIES = ;

NAME = ; DESC = This object indicates the current state \ of the PVC DLCI. (Operational); HELP = ; CAPABILITIES = ; Enumeration: 'active': 2, 'inactive': 3, 'invalid': 1.

NAME = ; DESC = The number of frames received for this \ PVC tunnel. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The number of frames transmitted in this \ PVC tunnel (regardless whether they are Bc \ or Be frames). (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The number of frames received for this \ PVC tunnel (ingress) with the DE bit set \ to one. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The number of frames received for this \ PVC tunnel (ingress) which were treated as \ excess traffic. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The number of frames transmitted in this \ PVC tunnel (egress) which were treated as \ excess traffic. The DE bit may be set to one.\ (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The number of frames received for this \ PVC tunnel (ingress) that were discarded due \ to traffic enforcement. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The number of octets received for this \ PVC tunnel (ingress). (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The number of octets transmitted in this \ PVC tunnel (egress). (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The number of consecutive frames received\ with the BECN bit set before reducing \ the transmit rate. Used for FECN/BECN \ management. (Operation); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The minimum transmit throughput in \ bits per second. Used for FECN/BECN \ management. (Operation); HELP = ; CAPABILITIES = ;

NAME = ; DESC = Table of entries for Frame Relay Tunnel PVCs \ for this access device. (Configuration); HELP =; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = A row or entry in the Frame Relay Tunnel PVC \ Table. (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The ifIndex of the tunnel PVC itself. \ (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The DLCI number for this PVC tunnel. \ Note that this object may only be configured \ during row creation. (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The Card (Logical Interface Module - LIM) \ of the WAN port (physical FR link). \ Note that this object may only be configured \ during row creation. (Configuration); HELP = ; CAPABILITIES = ; Enumeration: 'lim2': 3, 'lim3': 4, 'lim1': 2, 'limA': 1, 'lim4': 5.

NAME = ; DESC = The channel number of this WAN port. \ Note that this object may only be configured \ during row creation. (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The FR tunnel PVC type. \ Note that this object may only be configured \ during row creation. (Configuration); HELP = ; CAPABILITIES = ; Enumeration: 'dte-panl': 1, 'dce-panl': 2, 'standard': 3.

NAME = ; DESC = The ifIndex of the FR physical port. \ (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum receive frame size in \ octets for this PVC tunnel data (sent into \ this unit). (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The receive committed burst size (Bc) in bits \ for this PVC tunnel data (sent into this unit). \ (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The receive excess burst size (Be) in bits \ for this PVC tunnel data (sent into this unit). \ (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum received throughput in \ bits per second. Used for FECN/BECN \ management. (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum transmission frame size in \ octets for this PVC tunnel data (sent out of \ this unit). (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The transmission committed burst size (Bc) in bits \ for this PVC tunnel data (sent out of this unit). \ (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The transmission excess burst size (Be) in bits \ for this PVC tunnel data (sent out of this unit). \ (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The maximum transmit throughput in \ bits per second. Used for FECN/BECN \ management. (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = This object is used to add new rows or delete \ existing rows in this FR Tunneling PVC \ table. (Configuration); HELP = ; CAPABILITIES = ; Enumeration: 'active': 3, 'add': 1, 'delete': 2.

NAME = ; DESC = The number of consecutive frames received\ with the BECN bit set before reducing \ the transmit rate. Used for FECN/BECN \ management. (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = The minimum transmit throughput in \ bits per second. Used for FECN/BECN \ management. (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = Table for mapping Netlinks (Tunnel PVC ifIndex \ values) to Virtual Ports. (Operational); HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Entry in the table for mapping Netlinks \ (Tunnel PVC ifIndex values) to Virtual \ Ports. (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = Virtual port ifIndex associated \ with this Netlink (Tunnel PVC). \ (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = Netlink (Tunnel PVC) ifIndex associated \ with the specified Virtual Port. \ (Operational); HELP = ; CAPABILITIES = ;

NAME = ; DESC = This object is used to indicate the operational \ status of the Tunnel PVC. (Operational); HELP = ; CAPABILITIES = ; Enumeration: 'down': 2, 'up': 1.

NAME = ; DESC = Table for mapping Netlinks (Tunnel PVC ifIndex \ values) to Virtual Ports. (Configuration); HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Entry in the table for mapping Netlinks \ (Tunnel PVC ifIndex values) to Virtual \ Ports. (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = Virtual port ifIndex associated \ with this Netlink (Tunnel PVC). \ (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = Netlink (Tunnel PVC) ifIndex associated \ with the specified Virtual Port. \ (Configuration); HELP = ; CAPABILITIES = ;

NAME = ; DESC = This object is used to add new rows or delete \ existing rows in this Virtual Port to Netlink \ Mapping table. (Configuration) ; HELP = ; CAPABILITIES = ; Enumeration: 'active': 3, 'add': 1, 'delete': 2.

NAME = ; DESC = This table has been OBSOLETED for software \ releases beginning with Release 3.0. \ Table to reset Frame Relay physical \ port counters; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Entry in the Frame Relay Physical \ port counters table; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The ifIndex of the physical port whose \ counters are to be reset; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Action to be taken on counters (reset); HELP = When set to reset, the physical port \ counters should be zeroed out for the \ specified ifIndex; CAPABILITIES = ; Enumeration: 'reset': 1, 'other': 2.

NAME = ; DESC = This table has been OBSOLETED for software \ releases beginning with Release 3.0. \ Table to reset the Frame Relay \ virtual port counters; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Entry in the virtual port counter \ table; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The ifIndex of the virtual port whose \ counters are to be reset; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Action to be taken on the counters (reset); HELP = When set to reset, the virtual port \ counters should be zeroed out for the \ specified ifIndex; CAPABILITIES = ; Enumeration: 'reset': 1, 'other': 2.

NAME = ; DESC = This table has been OBSOLETED for software \ releases beginning with Release 3.0. \ Table used to reset counters \ associated with the PVC; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Entry in the PVC counter reset \ table; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Ifindex associated with the pvc.; HELP = The ifIndex of the physical port \ associated with the PVC whose \ counters are to be reset; CAPABILITIES = ;

NAME = ; DESC = The DLCI number of the PVC whose \ counters are to be reset; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Action to be taken on the PVC \ counter (reset); HELP = When set to reset, the PVC Counters \ get reset; CAPABILITIES = ; Enumeration: 'reset': 1, 'other': 2.

NAME = ; DESC = This table has been OBSOLETED for software \ releases beginning with Release 3.0. \ Table used to reset counters \ associated with the SVC; HELP = ; CAPABILITIES = NET_CFG, VPN_DISP;

NAME = ; DESC = Entry int the SVC Counter table; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Ifindex associated with the SVC \ for which the counters are to be\ reset; HELP = ; CAPABILITIES = ;

NAME = ; DESC = The DNA associated with the SVC \ whose counters are to be reset; HELP = ; CAPABILITIES = ;

NAME = ; DESC = Action to take on the SVC \ counters (reset); HELP = When set to reset, the SVC \ counters should be reset; CAPABILITIES = ; Enumeration: 'reset': 1, 'other': 2.

NAME = ; DESC = FR TRAP message: indication of WAN link \ up.\ Severity Level: INFORMATIVE.; HELP = The Frame Relay WAN LINK is up. \ Normal status Indicator.;

NAME = ; DESC = FR TRAP message: indication of WAN link \ down.\ Severity Level: CRITICAL.; HELP = Loss of Physical connection, or LMI is dropped.\ Please check the physical connection; the MPANL \ LMI status, and provisioning on Passport. If \ no change, contact Sys Admin., or Field \ Personnel.;