LIEBERT-MICRO-UPS-MIB: View SNMP OID List / Download MIB

VENDOR: VERTIV


 Home MIB: LIEBERT-MICRO-UPS-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, SNMPv2-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 emerson 1.3.6.1.4.1.476
         liebertCorp 1.3.6.1.4.1.476.1
             liebertUps 1.3.6.1.4.1.476.1.1
                 luExtensions 1.3.6.1.4.1.476.1.1.1
                     luCore 1.3.6.1.4.1.476.1.1.1.1
                         lcUpsIdent 1.3.6.1.4.1.476.1.1.1.1.1
                             lcUpsIdentManufacturer 1.3.6.1.4.1.476.1.1.1.1.1.1 displaystring read-only
The UPS manufacturer.
                             lcUpsIdentModel 1.3.6.1.4.1.476.1.1.1.1.1.2 displaystring read-write
The UPS Model designation.
                             lcUpsIdentSoftwareVersion 1.3.6.1.4.1.476.1.1.1.1.1.3 displaystring read-only
The UPS SNMP Agent software version.
                             lcUpsIdentSpecific 1.3.6.1.4.1.476.1.1.1.1.1.4 object identifier read-only
A reference to MIB definitions specific to the particular UPS being managed. This object is used to locate the product-specific MIB for this device. If this information is not present, its value should be the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
                         lcUpsAlarm 1.3.6.1.4.1.476.1.1.1.1.6
                             lcUpsAlarms 1.3.6.1.4.1.476.1.1.1.1.6.1 gauge read-only
The current number of alarm conditions.
                             lcUpsAlarmTable 1.3.6.1.4.1.476.1.1.1.1.6.2 no-access
                                 lcUpsAlarmEntry 1.3.6.1.4.1.476.1.1.1.1.6.2.1 no-access
                                     lcUpsAlarmId 1.3.6.1.4.1.476.1.1.1.1.6.2.1.1 integer read-only
A unique identifier for an alarm condition. This value must remain constant between agent initializations.
                                     lcUpsAlarmDescr 1.3.6.1.4.1.476.1.1.1.1.6.2.1.2 object identifier read-only
A reference to an alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description of the alarm condition.
                                     lcUpsAlarmTime 1.3.6.1.4.1.476.1.1.1.1.6.2.1.3 timeticks read-only
The value of sysUpTime when the alarm condition occured.
                             lcUpsAlarmConditions 1.3.6.1.4.1.476.1.1.1.1.6.3
                                 lcUpsAlarmLowBatteryWarning 1.3.6.1.4.1.476.1.1.1.1.6.3.1
                                 lcUpsAlarmOnBattery 1.3.6.1.4.1.476.1.1.1.1.6.3.10
                                 lcUpsAlarmStopNoticeIssued 1.3.6.1.4.1.476.1.1.1.1.6.3.11
                         lcUpsControl 1.3.6.1.4.1.476.1.1.1.1.8
                             lcUpsControlUnixShutdownDelay 1.3.6.1.4.1.476.1.1.1.1.8.5 integer read-write
Setting this object causes the agent to instruct the UPS to perform a UNIX Shutdown in the indicated number of seconds. The agent counts down the number of seconds until the event will take place. A Unix shutdown is only valid if the UPS is on Battery. During a UNIX Shutdown, the UPS will turn off the output even if the Utility comes back on line before the shutdown time arrives. Note that different models have different clock resolutions, usually greater than 1 second. As a result, the command will only be accurate to the resolution of the UPS's clock. The command can be cancelled by setting lcUpsControlCancelCommand to the value 'cancel'.
                             lcUpsControlUnixShutdownTrapDelay 1.3.6.1.4.1.476.1.1.1.1.8.6 integer read-write
When 'lcUpsControlUnixShutdownDelay' reaches a value less than or equal to this object's value, an lcUpsUnixShutdownWarningTrap will be produced and this object will be reset to 0.
                             lcUpsControlCancelCommands 1.3.6.1.4.1.476.1.1.1.1.8.7 integer read-write
Setting this variable to 'cancel' will cause the agent to issue instructions to the UPS to cancel all outstanding commands, such as lcUpsControlOutputOff, lcUpsControlOutputOn, lcUpsControlUnixShutdown. Enumeration: 'cancel': 2, 'unknown': 1.
                             lcUpsControlRebootAgentDelay 1.3.6.1.4.1.476.1.1.1.1.8.8 integer read-write
Setting this object causes the agent to reboot after the indicated number of seconds have expired. The value will count down until the event takes place. The command can be cancelled by setting lcUpsControlCancleCommand to the value cancel.
                         lcUpsNominal 1.3.6.1.4.1.476.1.1.1.1.9
                             lcUpsNominalOutputVoltage 1.3.6.1.4.1.476.1.1.1.1.9.1 integer read-write
The nominal output voltage. (Unit of measure: volt)
                             lcUpsNominalInputVoltage 1.3.6.1.4.1.476.1.1.1.1.9.2 integer read-write
The nominal input voltage. (Unit of measure: volt)
                             lcUpsNominalOutputVA 1.3.6.1.4.1.476.1.1.1.1.9.3 integer read-write
The nominal Volt-Amp rating.
                             lcUpsNominalOutputWatts 1.3.6.1.4.1.476.1.1.1.1.9.4 integer read-write
The nominal power rating. (Unit of measure: watt)
                             lcUpsNominalOutputFreq 1.3.6.1.4.1.476.1.1.1.1.9.5 integer read-write
The nominal output frequency. (Unit of measure: Hertz)
                             lcUpsNominalInputFreq 1.3.6.1.4.1.476.1.1.1.1.9.6 integer read-write
The nominal input frequency. (Unit of measure: Hertz)
                         lcUpsTraps 1.3.6.1.4.1.476.1.1.1.1.11
                                 lcUpsOnBatteryTrap 1.3.6.1.4.1.476.1.1.1.1.110.3
An lcUpsOnBatteryTrap signifies that the UPS is currently on Battery Power.
                                 lcUpsLowBatteryWarningTrap 1.3.6.1.4.1.476.1.1.1.1.110.4
An lcUpsLowBatteryWarningTrap signifies that the UPS has entered a Low Battery state.
                                 lcUpsAlarmTrap 1.3.6.1.4.1.476.1.1.1.1.110.11
An Alarm condition has occurred and is being reported in the lcUpsAlarmTable.
                                 lcUpsUnixShutdownTrap 1.3.6.1.4.1.476.1.1.1.1.110.16
An lcUpsUnixShutodwnTrap is sent 2 seconds before the UPS is scheduled to perform a Unix Shutdown.
                                 lcUpsUnixShutdownWarningTrap 1.3.6.1.4.1.476.1.1.1.1.110.17
An lcUpsUnixShutdownWarningTrap is sent when the lcUpsControlUnixShudownDelay reaches the value of lcUpsControlUnixShutdownTrapDelay.
                     luExternal 1.3.6.1.4.1.476.1.1.1.6
                 luExperimental 1.3.6.1.4.1.476.1.1.2
                 luPrivate 1.3.6.1.4.1.476.1.1.3