LIEBERT-GP-AGENT-MIB: View SNMP OID List / Download MIB

VENDOR: VERTIV


 Home MIB: LIEBERT-GP-AGENT-MIB
Download as:   
SNMPv2-CONF, LIEBERT-GP-REGISTRATION-MIB, SNMPv2-MIB, SNMPv2-SMI, SNMPv2-TC, LIEBERT-GP-CONDITIONS-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 liebertAgentModule 1.3.6.1.4.1.476.1.42.1.2.1
The MIB module used to specify Liebert software or firmware agent SNMP OIDs. Copyright 2000-2008 Liebert Corporation. All rights reserved. Reproduction of this document is authorized on the condition that the forgoing copyright notice is included. This Specification is supplied 'AS IS' and Liebert Corporation makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
 lgpAgentIdentManufacturer 1.3.6.1.4.1.476.1.42.2.1.1 displaystring read-only
The agent manufacturer.
 lgpAgentIdentModel 1.3.6.1.4.1.476.1.42.2.1.2 displaystring read-only
The agent model designation. This identifier is typically a model name or ID
 lgpAgentIdentFirmwareVersion 1.3.6.1.4.1.476.1.42.2.1.3 displaystring read-only
The firmware revision level of the agent.
 lgpAgentIdentSerialNumber 1.3.6.1.4.1.476.1.42.2.1.4 displaystring read-only
The serial number of the agent. This is a string of alphanumeric characters that uniquely identifies the agent hardware. This number is assigned when the agent hardware is manufactured and does not change throughout its lifecycle.
 lgpAgentIdentPartNumber 1.3.6.1.4.1.476.1.42.2.1.5 displaystring read-only
The agent model part number designation.
 lgpAgentConnectedDeviceCount 1.3.6.1.4.1.476.1.42.2.1.6 unsigned32 read-only
The number of devices currently connected and communicating successfully with the agent. Devices for which communications are currently being attempted are not considered in this count.
 lgpAgentEventNotifications 1.3.6.1.4.1.476.1.42.2.3.0
Agent specific notifications.
     lgpAgentDeviceCommunicationLost 1.3.6.1.4.1.476.1.42.2.3.0.1
The agent has lost communications with a managed device.
     lgpAgentFirmwareUpdateSuccessful 1.3.6.1.4.1.476.1.42.2.3.0.5
The firmware update to the agent card has completed successfully.
     lgpAgentFirmwareCorrupt 1.3.6.1.4.1.476.1.42.2.3.0.6
The firmware update to the agent card has failed and the firmware is now corrupt.
     lgpAgentHeartbeat 1.3.6.1.4.1.476.1.42.2.3.0.7
The agent card is alive.
     lgpAgentDnsLookupFailure 1.3.6.1.4.1.476.1.42.2.3.0.8
A Domain Name System (DNS) lookup of a network name failed to resolve. This may result in one or more of the following: 1. failure to notify a target address of an important condition 2. failure allow access for monitoring purposes This issue should be resolved as soon as possible with a network or system administrator.
 lgpAgentManagedDeviceTable 1.3.6.1.4.1.476.1.42.2.4.2 no-access
This table contains one entry for each managed device.
     lgpAgentManagedDeviceEntry 1.3.6.1.4.1.476.1.42.2.4.2.1 no-access
This entry describes a row in the table 'lgpAgentManagedDeviceTable'. The rows in this table cannot be created by the NMS. The rows are automatically created by the agent based upon the hardware configuration of the Liebert managed device(s) being monitored with this agent.
         lgpAgentDeviceIndex 1.3.6.1.4.1.476.1.42.2.4.2.1.1 integer32 read-only
The device identifier. This is used as an index to address a particular row in the table 'lgpAgentManagedDeviceTable'.
         lgpAgentDeviceId 1.3.6.1.4.1.476.1.42.2.4.2.1.2 object identifier read-only
The managed device specific identifier defined by the product registration.
         lgpAgentDeviceManufacturer 1.3.6.1.4.1.476.1.42.2.4.2.1.3 displaystring read-only
The managed device manufacturer.
         lgpAgentDeviceModel 1.3.6.1.4.1.476.1.42.2.4.2.1.4 displaystring read-only
The managed device model designation.
         lgpAgentDeviceFirmwareVersion 1.3.6.1.4.1.476.1.42.2.4.2.1.5 displaystring read-only
The firmware revision level of the managed device.
         lgpAgentDeviceUnitNumber 1.3.6.1.4.1.476.1.42.2.4.2.1.6 integer32 read-write
The managed device unit number. Typically this is a number assigned to a managed device that uniquely identifies it from other similar devices within a 'system'.
         lgpAgentDeviceSerialNumber 1.3.6.1.4.1.476.1.42.2.4.2.1.7 displaystring read-only
The serial number of the managed device.
         lgpAgentDeviceManufactureDate 1.3.6.1.4.1.476.1.42.2.4.2.1.8 displaystring read-only
The manufacture date of the managed device.
         lgpAgentDeviceServiceContact 1.3.6.1.4.1.476.1.42.2.4.2.1.9 displaystring read-write
The service contact of the managed device.
         lgpAgentDeviceServicePhoneNumber 1.3.6.1.4.1.476.1.42.2.4.2.1.10 displaystring read-write
The phone number of the service contact of the managed device.
         lgpAgentDeviceServiceAddrLine1 1.3.6.1.4.1.476.1.42.2.4.2.1.11 displaystring read-write
Line 1 of the service address of the managed device.
         lgpAgentDeviceServiceAddrLine2 1.3.6.1.4.1.476.1.42.2.4.2.1.12 displaystring read-write
Line 2 of the service address of the managed device.
         lgpAgentDeviceServiceAddrLine3 1.3.6.1.4.1.476.1.42.2.4.2.1.13 displaystring read-write
Line 3 of the service address of the managed device.
         lgpAgentDeviceServiceAddrLine4 1.3.6.1.4.1.476.1.42.2.4.2.1.14 displaystring read-write
Line 4 of the service address of the managed device.
         lgpAgentDeviceUnitName 1.3.6.1.4.1.476.1.42.2.4.2.1.15 displaystring read-write
Unit name for the managed device assigned by the customer.
         lgpAgentDeviceSiteIdentifier 1.3.6.1.4.1.476.1.42.2.4.2.1.16 displaystring read-write
Identifier that uniquely identifies the site where this device is located.
         lgpAgentDeviceTagNumber 1.3.6.1.4.1.476.1.42.2.4.2.1.17 displaystring read-write
Identifier that uniquely identifies this device within a particular site (see lgpAgentDeviceSiteIdentifier).
         lgpAgentDeviceOrderLine1 1.3.6.1.4.1.476.1.42.2.4.2.1.18 displaystring read-write
Customer Sales Order information line 1.
         lgpAgentDeviceOrderLine2 1.3.6.1.4.1.476.1.42.2.4.2.1.19 displaystring read-write
Customer Sales Order information line 2.
 lgpAgentReboot 1.3.6.1.4.1.476.1.42.2.5.1 integer32 read-write
Perform an immediate 'reboot' of the agent process. When possible the reboot will approximate a power on reset of the agent communications hardware. This type of reboot will be performed if a hardware reset is supported by the hardware/software on the communications card. Otherwise a 'software' reboot will be executed. In both cases a temporary loss of communications and other agent functionality will result. Any valid INTEGER value may be written to this object to initiate the reboot operation. If read the value '0' will always be returned.
 lgpAgentTelnetEnabled 1.3.6.1.4.1.476.1.42.2.5.2 integer read-write
This object represents the settings of Telnet. yes Telnet services are enabled. no Telnet services are disabled. The system must be rebooted before changes can take effect. Enumeration: 'yes': 1, 'no': 2.
 lgpAgentVelocityServerEnabled 1.3.6.1.4.1.476.1.42.2.5.3 integer read-write
This object configures the Velocity Server to grant external clients access to agent data via the Liebert Velocity protocol. yes Agent data is available to external clients via the Liebert Velocity protocol. no Agent data is not available to external clients via the Liebert Velocity protocol. The system must be rebooted before changes can take effect. Enumeration: 'yes': 1, 'no': 2.
 lgpAgentWebServerMode 1.3.6.1.4.1.476.1.42.2.5.4 integer read-write
This object represents the settings of Web services. disabled Web services are disabled. http Web server mode is HTTP (not secure). https Web server mode is secure HTTP. The system must be rebooted before changes can take effect. Enumeration: 'disabled': 0, 'http': 1, 'https': 2.