L2L3-VPN-MULTICAST-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: L2L3-VPN-MULTICAST-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, MPLS-TC-STD-MIB, L2L3-VPN-MULTICAST-TC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 l2L3VpnMcastMIB 1.3.6.1.2.1.245
This MIB module defines a table representing the attribute information of the provider tunnels (P-tunnels) on a PE router. This MIB module will be used by other MIB modules designed for monitoring and/or configuring Border Gateway Protocol/Multiprotocol Label Switching Layer 2 and Layer 3 Virtual Private Network that support multicast (L2L3VpnMCast network). Copyright (c) 2018 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
         l2L3VpnMcastStates 1.3.6.1.2.1.245.1
             l2L3VpnMcastPmsiTunnelAttributeTable 1.3.6.1.2.1.245.1.1 no-access
An entry in this table corresponds to the attribute information of a specific P-tunnel on a PE router. A part of the attributes corresponds to fields in a Provider Multicast Service Interface (PMSI) Tunnel attribute advertised and received by a PE router. The entries will be referred to by other MIB modules for monitoring and/or configuring L2L3VpnMCast networks.
                 l2L3VpnMcastPmsiTunnelAttributeEntry 1.3.6.1.2.1.245.1.1.1 no-access
A conceptual row corresponding to a specific P-tunnel on this router.
                     l2L3VpnMcastPmsiTunnelAttributeType 1.3.6.1.2.1.245.1.1.1.1 l2l3vpnmcastprovidertunneltype no-access
This object indicates the type of tunneling technology used to establish the P-tunnel corresponding to this entry. When BGP-based PMSI signaling is used, the value of this object corresponds to the Tunnel Type field in the PMSI Tunnel attribute advertised/received in a PMSI auto-discovery (A-D) route.
                     l2L3VpnMcastPmsiTunnelAttributeId 1.3.6.1.2.1.245.1.1.1.2 l2l3vpnmcastprovidertunnelid no-access
This object represents the Tunnel Identifier field, which uniquely identifies a P-tunnel, in the PMSI Tunnel attribute of the P-tunnel corresponding to this entry. The size of the identifier depends on the address family (IPv4 or IPv6) and the value of the corresponding l2L3VpnMcastPmsiTunnelAttributeType object, i.e., the type of tunneling technology used to establish the P-tunnel.
                     l2L3VpnMCastPmsiTunnelLeafInfoRequired 1.3.6.1.2.1.245.1.1.1.3 integer read-only
When the value of this object is set to 1 (true), it indicates that the PE that originated the PMSI Tunnel attribute of the P-tunnel corresponding to this entry requests receivers to originate a new Leaf A-D route. A value of zero (false) indicates that there is no such request. When the P-tunnel does not have a corresponding PMSI Tunnel attribute, the value of this object will be 2 (notAvailable). In the case of multicast in MPLS/BGP IP VPNs, this object represents the 'Leaf Information Required flag' (RFC 6514) in the Flags field in the PMSI Tunnel attribute of the P-tunnel corresponding to this entry. Enumeration: 'notAvailable': 2, 'false': 0, 'true': 1.
                     l2L3VpnMcastPmsiTunnelAttributeMplsLabel 1.3.6.1.2.1.245.1.1.1.4 mplslabel read-only
This object represents the MPLS Label in the PMSI Tunnel attribute of the P-tunnel corresponding to this entry. When BGP-based PMSI signaling is used, the PMSI Tunnel attribute of the P-tunnel will be advertised/received in a PMSI A-D route. The value of this object corresponds to the MPLS Label in the attribute. When the P-tunnel does not have a PMSI tunnel attribute, the value of this object will be zero.
                     l2L3VpnMcastPmsiTunnelPointer 1.3.6.1.2.1.245.1.1.1.5 rowpointer read-only
Details of a P-tunnel identified by l2L3VpnMcastPmsiTunnelAttributeId may be present in some other table, e.g., mplsTunnelTable (RFC 3812). This object specifies the pointer to the row that pertains to the entry in the table. If no such entry exists, the value of this object will be zeroDotZero.
                     l2L3VpnMcastPmsiTunnelIf 1.3.6.1.2.1.245.1.1.1.6 rowpointer read-only
If the P-tunnel identified by l2L3VpnMcastPmsiTunnelAttributeId has a corresponding entry in ifXTable (RFC 2863), this object will point to the row in ifXTable that pertains to the entry. Otherwise, the value of this object will be zeroDotZero.
         l2L3VpnMcastConformance 1.3.6.1.2.1.245.2
             l2L3VpnMcastCompliances 1.3.6.1.2.1.245.2.1
                 l2L3VpnMcastCoreCompliance 1.3.6.1.2.1.245.2.1.1
The core compliance statement for SNMP entities that implement the L2L3-VPN-MULTICAST-MIB module.
                 l2L3VpnMcastFullCompliance 1.3.6.1.2.1.245.2.1.2
The full compliance statement for SNMP entities that implement the L2L3-VPN-MULTICAST-MIB module.
             l2L3VpnMcastGroups 1.3.6.1.2.1.245.2.2
                 l2L3VpnMcastCoreGroup 1.3.6.1.2.1.245.2.2.1
Support of these objects is required.
                 l2L3VpnMcastOptionalGroup 1.3.6.1.2.1.245.2.2.2
Support of these objects is optional.