HUAWEI-TUNNEL-TE-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-TUNNEL-TE-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, HUAWEI-MIB, MPLS-LSR-STD-MIB, SNMPv2-TC, MPLS-TC-STD-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwTunnelTeMib 1.3.6.1.4.1.2011.5.25.151
This MIB contains private managed object definitions for the binding information.
         hwTunnelTeMibObject 1.3.6.1.4.1.2011.5.25.151.1
             hwTunnelDiffServTable 1.3.6.1.4.1.2011.5.25.151.1.1 no-access
The table describes the different service mode of tunnel.
                 hwTunnelDiffServEntry 1.3.6.1.4.1.2011.5.25.151.1.1.1 no-access
Interface different service mode attribute configuration.
                     hwTunnelDiffServIndex 1.3.6.1.4.1.2011.5.25.151.1.1.1.1 interfaceindex no-access
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2),this value should be equal to the value signalled in the Tunnel ID of the session object. When the MPLS signalling protocol is crldp(3) this value should be equal to the value signalled in the LSP ID. Reference to MPLS-TE-STD-MIB.
                     hwTunnelDiffServMode 1.3.6.1.4.1.2011.5.25.151.1.1.1.2 integer read-only
Different service mode of TE interface, default is uniform. Enumeration: 'pipe': 1, 'uniform': 2.
                     hwTunnelDiffServServiceClass 1.3.6.1.4.1.2011.5.25.151.1.1.1.3 integer read-only
PHB in the ingress PE, the value must be be,af1,af2,af3,af4,ef,cs6,cs7.The default class is invalidClass(255). Enumeration: 'be': 1, 'invalidClass': 255, 'ef': 6, 'af4': 5, 'cs7': 8, 'cs6': 7, 'af1': 2, 'af2': 3, 'af3': 4.
                     hwTunnelDiffServColor 1.3.6.1.4.1.2011.5.25.151.1.1.1.4 integer read-only
Remarked color of packet in the ingress PE, the value must be green,yellow,red.The default color is invalidColor(255). Enumeration: 'invalidColor': 255, 'green': 1, 'red': 3, 'yellow': 2.
                     hwTunnelTeFlowQueue 1.3.6.1.4.1.2011.5.25.151.1.1.1.5 octet string read-only
Name of flow-queue template.
             hwTunnelTeVsiTable 1.3.6.1.4.1.2011.5.25.151.1.2 no-access
The table describes the VPN binding of Tunnel.
                 hwTunnelTeVsiEntry 1.3.6.1.4.1.2011.5.25.151.1.2.1 no-access
The L2VPN VSI binding configuration of tunnel interface.
                     hwTunnelTeVsiIndex 1.3.6.1.4.1.2011.5.25.151.1.2.1.1 interfaceindex no-access
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2),this value should be equal to the value signalled in the tunnel ID of the session object. When the MPLS signalling protocol is crldp(3) this value should be equal to the value signalled in the LSP ID. Reference to MPLS-TE-STD-MIB.
                     hwTunnelTeVsiName 1.3.6.1.4.1.2011.5.25.151.1.2.1.2 octet string no-access
The name of VSI that the TE interface bind.
                     hwTunnelTeVsiCir 1.3.6.1.4.1.2011.5.25.151.1.2.1.3 integer32 read-only
The Committed Information Rate of the VSI.
                     hwTunnelTeVsiPir 1.3.6.1.4.1.2011.5.25.151.1.2.1.4 integer32 read-only
The Peak Information Rate of the VSI.
                     hwTunnelTeVsiFlowQueue 1.3.6.1.4.1.2011.5.25.151.1.2.1.5 octet string read-only
Name of flow-queue template.
             hwTunnelTeVllTable 1.3.6.1.4.1.2011.5.25.151.1.3 no-access
The table describes the VLL binding of tunnel.
                 hwTunnelTeVllEntry 1.3.6.1.4.1.2011.5.25.151.1.3.1 no-access
The VLL binding configuration of tunnel interface.
                     hwTunnelTeVllIndex 1.3.6.1.4.1.2011.5.25.151.1.3.1.1 interfaceindex no-access
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2),this value should be equal to the value signalled in the tunnel ID of the session object. When the MPLS signalling protocol is crldp(3) this value should be equal to the value signalled in the LSP ID. Reference to MPLS-TE-STD-MIB.
                     hwTunnelTeVllInterfaceName 1.3.6.1.4.1.2011.5.25.151.1.3.1.2 octet string no-access
The interface name of VLL binding.
                     hwTunnelTeVllCir 1.3.6.1.4.1.2011.5.25.151.1.3.1.3 integer32 read-only
The Committed Information Rate of the VLL.
                     hwTunnelTeVllPir 1.3.6.1.4.1.2011.5.25.151.1.3.1.4 integer32 read-only
The Peak Information Rate of the VLL.
                     hwTunnelTeVllFlowQueue 1.3.6.1.4.1.2011.5.25.151.1.3.1.5 octet string read-only
Name of flow-queue template.
             hwTunnelTeL3vpnTable 1.3.6.1.4.1.2011.5.25.151.1.4 no-access
The table describes the L3VPN binding of tunnel.
                 hwTunnelTeL3vpnEntry 1.3.6.1.4.1.2011.5.25.151.1.4.1 no-access
The L3VPN binding configuration of tunnel interface.
                     hwTunnelTeL3vpnIndex 1.3.6.1.4.1.2011.5.25.151.1.4.1.1 interfaceindex no-access
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2),this value should be equal to the value signalled in the tunnel ID of the session object. When the MPLS signalling protocol is crldp(3) this value should be equal to the value signalled in the LSP ID. Reference to MPLS-TE-STD-MIB.
                     hwTunnelTeL3vpnName 1.3.6.1.4.1.2011.5.25.151.1.4.1.2 octet string no-access
The name of VPN instance that the TE interface bind.
                     hwTunnelTeL3vpnCir 1.3.6.1.4.1.2011.5.25.151.1.4.1.3 integer32 read-only
The Committed Information Rate of the L3VPN.
                     hwTunnelTeL3vpnPir 1.3.6.1.4.1.2011.5.25.151.1.4.1.4 integer32 read-only
The Peak Information Rate of the L3VPN.
                     hwTunnelTeL3vpnFlowQueue 1.3.6.1.4.1.2011.5.25.151.1.4.1.5 octet string read-only
Name of flow-queue template.
             hwTunnelTeStatisticsTable 1.3.6.1.4.1.2011.5.25.151.1.5 no-access
The table describes the up/down state transition counts of the TE tunnel interface.
                 hwTunnelTeStatisticsEntry 1.3.6.1.4.1.2011.5.25.151.1.5.1 no-access
The up/down state transition counts of TE tunnel interface. The index of the table is hwTunnelTeStatisticsIfIndex.
                     hwTunnelTeStatisticsIfIndex 1.3.6.1.4.1.2011.5.25.151.1.5.1.1 interfaceindex no-access
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext.
                     hwTunnelTeUpDownStatistics 1.3.6.1.4.1.2011.5.25.151.1.5.1.2 unsigned32 read-only
Describes the up/down transition counts of the TE tunnel interface.
                     hwTunnTeCounterDiscontinuityTime 1.3.6.1.4.1.2011.5.25.151.1.5.1.3 timestamp read-only
The value of sysUpTime on the most recent occasion at which this interface's up/down transition counters suffered a discontinuity.
             hwCtTemplateTable 1.3.6.1.4.1.2011.5.25.151.1.6 no-access
The table describes the CT template configuration on the device.
                 hwCtTemplateEntry 1.3.6.1.4.1.2011.5.25.151.1.6.1 no-access
The CT template configuration on the device. The index of the table is hwCtTemplateIndex.
                     hwCtTemplateIndex 1.3.6.1.4.1.2011.5.25.151.1.6.1.1 integer32 no-access
It uniquely identifies a set of CT templates. Managers should obtain new values for row creation in this table by reading hwCtTemplateIndex.
                     hwCtTemplateName 1.3.6.1.4.1.2011.5.25.151.1.6.1.2 octet string read-only
The CT template name.
                     hwCtTemplateCt0 1.3.6.1.4.1.2011.5.25.151.1.6.1.3 unsigned32 read-only
The CT0 bandwidth of the CT template.
                     hwCtTemplateCt1 1.3.6.1.4.1.2011.5.25.151.1.6.1.4 unsigned32 read-only
The CT1 bandwidth of the CT template.
                     hwCtTemplateCt2 1.3.6.1.4.1.2011.5.25.151.1.6.1.5 unsigned32 read-only
The CT2 bandwidth of the CT template.
                     hwCtTemplateCt3 1.3.6.1.4.1.2011.5.25.151.1.6.1.6 unsigned32 read-only
The CT3 bandwidth of the CT template.
                     hwCtTemplateCt4 1.3.6.1.4.1.2011.5.25.151.1.6.1.7 unsigned32 read-only
The CT4 bandwidth of the CT template.
                     hwCtTemplateCt5 1.3.6.1.4.1.2011.5.25.151.1.6.1.8 unsigned32 read-only
The CT5 bandwidth of the CT template.
                     hwCtTemplateCt6 1.3.6.1.4.1.2011.5.25.151.1.6.1.9 unsigned32 read-only
The CT6 bandwidth of the CT template.
                     hwCtTemplateCt7 1.3.6.1.4.1.2011.5.25.151.1.6.1.10 unsigned32 read-only
The CT7 bandwidth of the CT template.
                     hwCtTemplateCommit 1.3.6.1.4.1.2011.5.25.151.1.6.1.11 integer read-only
The commit flag of the CT template,1 indicates commit,0 indicates not commit. Enumeration: 'notCommit': 1, 'commit': 2.
                     hwCtTemplateRowStatus 1.3.6.1.4.1.2011.5.25.151.1.6.1.12 rowstatus read-only
This object is used to create and delete rows in the CT template.
             hwCtConfigTunnelCtTable 1.3.6.1.4.1.2011.5.25.151.1.7 no-access
The table describes the CT configuration in the TE tunnel interface.
                 hwCtConfigTunnelCtEntry 1.3.6.1.4.1.2011.5.25.151.1.7.1 no-access
The table describes the CT configuration in the TE tunnel interface. The index of the table is hwCtConfigTunnelCtIfIndex.
                     hwCtConfigTunnelCtIfIndex 1.3.6.1.4.1.2011.5.25.151.1.7.1.1 interfaceindex no-access
Uniquely identifies a set of tunnels between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2),this value should be equal to the value signalled in the tunnel ID of the session object. When the MPLS signalling protocol is crldp(3) this value should be equal to the value signalled in the LSP ID. Reference to MPLS-TE-STD-MIB.
                     hwCtConfigTunnelName 1.3.6.1.4.1.2011.5.25.151.1.7.1.2 octet string read-only
The name of the TE tunnel interface.
                     hwCtConfigTunnelCommit 1.3.6.1.4.1.2011.5.25.151.1.7.1.3 integer read-only
The commit flag of the TE tunnel interface,1 indicates commit,0 indicates not commit. Enumeration: 'notCommit': 1, 'commit': 2.
                     hwCtConfigTemplateName 1.3.6.1.4.1.2011.5.25.151.1.7.1.4 octet string read-only
The CT template name.
                     hwCtConfigTunnelCt0Band 1.3.6.1.4.1.2011.5.25.151.1.7.1.5 unsigned32 read-only
The CT0 bandwidth value of the TE tunnel interface.
                     hwCtConfigTunnelCt1Band 1.3.6.1.4.1.2011.5.25.151.1.7.1.6 unsigned32 read-only
The CT1 bandwidth value of the TE tunnel interface.
                     hwCtConfigTunnelCt2Band 1.3.6.1.4.1.2011.5.25.151.1.7.1.7 unsigned32 read-only
The CT2 bandwidth value of the TE tunnel interface.
                     hwCtConfigTunnelCt3Band 1.3.6.1.4.1.2011.5.25.151.1.7.1.8 unsigned32 read-only
The CT3 bandwidth value of the TE tunnel interface.
                     hwCtConfigTunnelCt4Band 1.3.6.1.4.1.2011.5.25.151.1.7.1.9 unsigned32 read-only
The CT4 bandwidth value of the TE tunnel interface.
                     hwCtConfigTunnelCt5Band 1.3.6.1.4.1.2011.5.25.151.1.7.1.10 unsigned32 read-only
The CT5 bandwidth value of the TE tunnel interface.
                     hwCtConfigTunnelCt6Band 1.3.6.1.4.1.2011.5.25.151.1.7.1.11 unsigned32 read-only
The CT6 bandwidth value of the TE tunnel interface.
                     hwCtConfigTunnelCt7Band 1.3.6.1.4.1.2011.5.25.151.1.7.1.12 unsigned32 read-only
The CT7 bandwidth value of the TE tunnel interface.
             hwCtStatisticsTable 1.3.6.1.4.1.2011.5.25.151.1.8 no-access
The table describes flow statistics of the TE tunnel interface VPN configuration.
                 hwCtStatisticsEntry 1.3.6.1.4.1.2011.5.25.151.1.8.1 no-access
The table describes the statistics in the TE tunnel interface with CT configuration. The index of the table is hwCtStatisticsIfIndex.
                     hwCtStatisticsIfIndex 1.3.6.1.4.1.2011.5.25.151.1.8.1.1 interfaceindex no-access
Uniquely identifies a set of tunnels between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2),this value should be equal to the value signalled in the tunnel ID of the session object. When the MPLS signalling protocol is crldp(3) this value should be equal to the value signalled in the LSP ID. Reference to MPLS-TE-STD-MIB.
                     hwCtStatisticsTunnelName 1.3.6.1.4.1.2011.5.25.151.1.8.1.2 octet string read-only
The name of the TE tunnel interface.
                     hwCtStatisticsCt0OutByteRate 1.3.6.1.4.1.2011.5.25.151.1.8.1.3 counter64 read-only
It counts the rate in bytes/sec out from the CT0 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt0OutPktRate 1.3.6.1.4.1.2011.5.25.151.1.8.1.4 counter64 read-only
It counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt0OutPkt 1.3.6.1.4.1.2011.5.25.151.1.8.1.5 counter64 read-only
It counts the out packets from the CT0 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt0OutPktByte 1.3.6.1.4.1.2011.5.25.151.1.8.1.6 counter64 read-only
It counts the out bytes from the CT0 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt0OutErrorPkt 1.3.6.1.4.1.2011.5.25.151.1.8.1.7 counter64 read-only
It counts the error packets from the CT0 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt1OutByteRate 1.3.6.1.4.1.2011.5.25.151.1.8.1.8 counter64 read-only
It counts the rate in bytes/sec out from CT1 the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt1OutPktRate 1.3.6.1.4.1.2011.5.25.151.1.8.1.9 counter64 read-only
It counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt1OutPkt 1.3.6.1.4.1.2011.5.25.151.1.8.1.10 counter64 read-only
It counts the out packets from the CT1 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt1OutPktByte 1.3.6.1.4.1.2011.5.25.151.1.8.1.11 counter64 read-only
It counts the out packet bytes from the CT1 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt1OutErrorPkt 1.3.6.1.4.1.2011.5.25.151.1.8.1.12 counter64 read-only
It counts the error packets from the CT1 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt2OutByteRate 1.3.6.1.4.1.2011.5.25.151.1.8.1.13 counter64 read-only
It counts the rate in bytes/sec out from the CT2 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt2OutPktRate 1.3.6.1.4.1.2011.5.25.151.1.8.1.14 counter64 read-only
It counts the rate in packets/sec out from the CT2 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt2OutPkt 1.3.6.1.4.1.2011.5.25.151.1.8.1.15 counter64 read-only
It counts the out packets from the CT2 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt2OutPktByte 1.3.6.1.4.1.2011.5.25.151.1.8.1.16 counter64 read-only
It counts the out packet bytes from the CT2 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt2OutErrorPkt 1.3.6.1.4.1.2011.5.25.151.1.8.1.17 counter64 read-only
It counts the error packets from the CT2 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt3OutByteRate 1.3.6.1.4.1.2011.5.25.151.1.8.1.18 counter64 read-only
The CT3 out in bytes/sec out of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt3OutPktRate 1.3.6.1.4.1.2011.5.25.151.1.8.1.19 counter64 read-only
It counts the rate in packets/sec out from the CT0 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt3OutPkt 1.3.6.1.4.1.2011.5.25.151.1.8.1.20 counter64 read-only
It counts the out packets from the CT3 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt3OutPktByte 1.3.6.1.4.1.2011.5.25.151.1.8.1.21 counter64 read-only
It counts the out packet bytes from the CT3 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt3OutErrorPkt 1.3.6.1.4.1.2011.5.25.151.1.8.1.22 counter64 read-only
It counts the error packets from the CT0 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt4OutByteRate 1.3.6.1.4.1.2011.5.25.151.1.8.1.23 counter64 read-only
The CT4 out in bytes/sec out of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt4OutPktRate 1.3.6.1.4.1.2011.5.25.151.1.8.1.24 counter64 read-only
It counts the rate in packets/sec out from the CT4 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt4OutPkt 1.3.6.1.4.1.2011.5.25.151.1.8.1.25 counter64 read-only
It counts the out packets from the CT4 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt4OutPktByte 1.3.6.1.4.1.2011.5.25.151.1.8.1.26 counter64 read-only
It counts the out packet bytes from the CT4 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt4OutErrorPkt 1.3.6.1.4.1.2011.5.25.151.1.8.1.27 counter64 read-only
It counts the error packets from the CT4 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt5OutByteRate 1.3.6.1.4.1.2011.5.25.151.1.8.1.28 counter64 read-only
The CT5 out in bytes/sec out of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt5OutPktRate 1.3.6.1.4.1.2011.5.25.151.1.8.1.29 counter64 read-only
It counts the rate in packets/sec out from the CT5 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt5OutPkt 1.3.6.1.4.1.2011.5.25.151.1.8.1.30 counter64 read-only
It counts the out packets from the CT5 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt5OutPktByte 1.3.6.1.4.1.2011.5.25.151.1.8.1.31 counter64 read-only
It counts the out packet bytes from the CT5 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt5OutErrorPkt 1.3.6.1.4.1.2011.5.25.151.1.8.1.32 counter64 read-only
It counts the error packets from the CT5 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt6OutByteRate 1.3.6.1.4.1.2011.5.25.151.1.8.1.33 counter64 read-only
The CT6 out in bytes/sec out of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt6OutPktRate 1.3.6.1.4.1.2011.5.25.151.1.8.1.34 counter64 read-only
It counts the rate in packets/sec out from the CT6 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt6OutPkt 1.3.6.1.4.1.2011.5.25.151.1.8.1.35 counter64 read-only
It counts the out packets from the CT6 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt6OutPktByte 1.3.6.1.4.1.2011.5.25.151.1.8.1.36 counter64 read-only
It counts the out packet bytes from the CT6 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt6OutErrorPkt 1.3.6.1.4.1.2011.5.25.151.1.8.1.37 counter64 read-only
It counts the error packets from the CT6 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt7OutByteRate 1.3.6.1.4.1.2011.5.25.151.1.8.1.38 counter64 read-only
The CT7 out in bytes/sec out of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt7OutPktRate 1.3.6.1.4.1.2011.5.25.151.1.8.1.39 counter64 read-only
It counts the rate in packets/sec out from the CT7 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt7OutPkt 1.3.6.1.4.1.2011.5.25.151.1.8.1.40 counter64 read-only
It counts the out packets from the CT7 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt7OutPktByte 1.3.6.1.4.1.2011.5.25.151.1.8.1.41 counter64 read-only
It counts the out packet bytes from the CT7 of the TE tunnel interface with VPN configuration.
                     hwCtStatisticsCt7OutErrorPkt 1.3.6.1.4.1.2011.5.25.151.1.8.1.42 counter64 read-only
It counts the error packets from the CT7 of the TE tunnel interface with VPN configuration.
             hwCtFlowTemplateTable 1.3.6.1.4.1.2011.5.25.151.1.9 no-access
The table describes max 8 of the CT-FLOW-Mapping template configuration on the device.
                 hwCtFlowTemplateEntry 1.3.6.1.4.1.2011.5.25.151.1.9.1 no-access
The table describes the CT-FLOW-Mapping template configuration on the device.
                     hwCtFlowTemplateID 1.3.6.1.4.1.2011.5.25.151.1.9.1.1 integer32 no-access
The index of CT-FLOW templat.
                     hwCtFlowTemplateName 1.3.6.1.4.1.2011.5.25.151.1.9.1.11 octet string read-only
The name of CT-FLOW template.
                     hwCt0Cos 1.3.6.1.4.1.2011.5.25.151.1.9.1.12 integer read-only
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'. Enumeration: 'be': 1, 'ef': 6, 'af4': 5, 'cs7': 8, 'cs6': 7, 'af1': 2, 'af2': 3, 'af3': 4.
                     hwCt0Scheduler 1.3.6.1.4.1.2011.5.25.151.1.9.1.13 integer read-only
Scheduler name. Enumeration: 'wfq': 2, 'pq': 1, 'lpq': 3.
                     hwCt0Valid 1.3.6.1.4.1.2011.5.25.151.1.9.1.14 integer read-only
The state of CT-FLOW templat row. Enumeration: 'valid': 1, 'invalid': 2.
                     hwCt1Cos 1.3.6.1.4.1.2011.5.25.151.1.9.1.15 integer read-only
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'. Enumeration: 'be': 1, 'ef': 6, 'af4': 5, 'cs7': 8, 'cs6': 7, 'af1': 2, 'af2': 3, 'af3': 4.
                     hwCt1Scheduler 1.3.6.1.4.1.2011.5.25.151.1.9.1.16 integer read-only
Scheduler name. Enumeration: 'wfq': 2, 'pq': 1, 'lpq': 3.
                     hwCt1Valid 1.3.6.1.4.1.2011.5.25.151.1.9.1.17 integer read-only
The state of CT-FLOW templat row. Enumeration: 'valid': 1, 'invalid': 2.
                     hwCt2Cos 1.3.6.1.4.1.2011.5.25.151.1.9.1.18 integer read-only
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'. Enumeration: 'be': 1, 'ef': 6, 'af4': 5, 'cs7': 8, 'cs6': 7, 'af1': 2, 'af2': 3, 'af3': 4.
                     hwCt2Scheduler 1.3.6.1.4.1.2011.5.25.151.1.9.1.19 integer read-only
Scheduler name. Enumeration: 'wfq': 2, 'pq': 1, 'lpq': 3.
                     hwCt2Valid 1.3.6.1.4.1.2011.5.25.151.1.9.1.20 integer read-only
The state of CT-FLOW templat row. Enumeration: 'valid': 1, 'invalid': 2.
                     hwCt3Cos 1.3.6.1.4.1.2011.5.25.151.1.9.1.21 integer read-only
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'. Enumeration: 'be': 1, 'ef': 6, 'af4': 5, 'cs7': 8, 'cs6': 7, 'af1': 2, 'af2': 3, 'af3': 4.
                     hwCt3Scheduler 1.3.6.1.4.1.2011.5.25.151.1.9.1.22 integer read-only
Scheduler name. Enumeration: 'wfq': 2, 'pq': 1, 'lpq': 3.
                     hwCt3Valid 1.3.6.1.4.1.2011.5.25.151.1.9.1.23 integer read-only
The state of CT-FLOW templat row. Enumeration: 'valid': 1, 'invalid': 2.
                     hwCt4Cos 1.3.6.1.4.1.2011.5.25.151.1.9.1.24 integer read-only
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'. Enumeration: 'be': 1, 'ef': 6, 'af4': 5, 'cs7': 8, 'cs6': 7, 'af1': 2, 'af2': 3, 'af3': 4.
                     hwCt4Scheduler 1.3.6.1.4.1.2011.5.25.151.1.9.1.25 integer read-only
Scheduler name. Enumeration: 'wfq': 2, 'pq': 1, 'lpq': 3.
                     hwCt4Valid 1.3.6.1.4.1.2011.5.25.151.1.9.1.26 integer read-only
The state of CT-FLOW templat row. Enumeration: 'valid': 1, 'invalid': 2.
                     hwCt5Cos 1.3.6.1.4.1.2011.5.25.151.1.9.1.27 integer read-only
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'. Enumeration: 'be': 1, 'ef': 6, 'af4': 5, 'cs7': 8, 'cs6': 7, 'af1': 2, 'af2': 3, 'af3': 4.
                     hwCt5Scheduler 1.3.6.1.4.1.2011.5.25.151.1.9.1.28 integer read-only
Scheduler name. Enumeration: 'wfq': 2, 'pq': 1, 'lpq': 3.
                     hwCt5Valid 1.3.6.1.4.1.2011.5.25.151.1.9.1.29 integer read-only
The state of CT-FLOW templat row. Enumeration: 'valid': 1, 'invalid': 2.
                     hwCt6Cos 1.3.6.1.4.1.2011.5.25.151.1.9.1.30 integer read-only
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'. Enumeration: 'be': 1, 'ef': 6, 'af4': 5, 'cs7': 8, 'cs6': 7, 'af1': 2, 'af2': 3, 'af3': 4.
                     hwCt6Scheduler 1.3.6.1.4.1.2011.5.25.151.1.9.1.31 integer read-only
Scheduler name. Enumeration: 'wfq': 2, 'pq': 1, 'lpq': 3.
                     hwCt6Valid 1.3.6.1.4.1.2011.5.25.151.1.9.1.32 integer read-only
The state of CT-FLOW templat row. Enumeration: 'valid': 1, 'invalid': 2.
                     hwCt7Cos 1.3.6.1.4.1.2011.5.25.151.1.9.1.33 integer read-only
The Value of class of service must be in 'be,af1,af2,af3,af4,ef,cs6,cs7'. Enumeration: 'be': 1, 'ef': 6, 'af4': 5, 'cs7': 8, 'cs6': 7, 'af1': 2, 'af2': 3, 'af3': 4.
                     hwCt7Scheduler 1.3.6.1.4.1.2011.5.25.151.1.9.1.34 integer read-only
Scheduler name. Enumeration: 'wfq': 2, 'pq': 1, 'lpq': 3.
                     hwCt7Valid 1.3.6.1.4.1.2011.5.25.151.1.9.1.35 integer read-only
The state of CT-FLOW templat row. Enumeration: 'valid': 1, 'invalid': 2.
                     hwCtFlowTemplateCommit 1.3.6.1.4.1.2011.5.25.151.1.9.1.36 integer read-only
The state of CT-FLOW templat commit. Enumeration: 'commit': 1, 'nocommit': 2.
                     hwCtFlowTemplateRowStatus 1.3.6.1.4.1.2011.5.25.151.1.9.1.51 rowstatus read-only
The state of CT-FLOW templat.
             hwDsteInterfaceCfgTable 1.3.6.1.4.1.2011.5.25.151.1.10 no-access
The DS-TE configuration at interface.
                   hwDsteInterfaceCfgEntry 1.3.6.1.4.1.2011.5.25.151.1.10.1 no-access
The DS-TE configuration at interface.
                       hwDsteIfIndex 1.3.6.1.4.1.2011.5.25.151.1.10.1.1 interfaceindex no-access
A unique value, greater than zero, for eachinterface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
                       hwAppliedCtFlowTemplateName 1.3.6.1.4.1.2011.5.25.151.1.10.1.11 octet string read-only
The name of CT-FLOW template.
                       hwCtBandWidthShareCfg 1.3.6.1.4.1.2011.5.25.151.1.10.1.12 integer read-only
The Value of Ct BandWidth configuration for DS-TE. That must be in 'Share,UnShare'. Enumeration: 'unshare': 2, 'share': 1.
         hwTunnelDsTeTrap 1.3.6.1.4.1.2011.5.25.151.2
             hwMplsFqShortage 1.3.6.1.4.1.2011.5.25.151.2.1
This notification is generated when FQ (flow-queue) template resources are shortage.
             hwMplsSqShortage 1.3.6.1.4.1.2011.5.25.151.2.2
This notification is generated when SQ (subscriber-queue) resources are shortage.
             hwMplsSqBandwidthExceed 1.3.6.1.4.1.2011.5.25.151.2.3
This notification is generated when the total bandwidth of SQ (subscriber-queue) exceeds 10G bit/s in one LPU.
             hwMplsHsbFqShortage 1.3.6.1.4.1.2011.5.25.151.2.4
This notification is generated when FQ (flow-queue) template resources in HSB are shortage.
             hwMplsHsbSqShortage 1.3.6.1.4.1.2011.5.25.151.2.5
This notification is generated when SQ (subscriber-queue) resources in HSB are shortage.
             hwMplsHsbSqBandwidthExceed 1.3.6.1.4.1.2011.5.25.151.2.6
This notification is generated when the total bandwidth of SQ (subscriber-queue) in HSB exceeds 10G bit/s in one LPU.
         hwTunnelTeConformance 1.3.6.1.4.1.2011.5.25.151.3
             hwTunnelTeCompliances 1.3.6.1.4.1.2011.5.25.151.3.1
                 hwTunnelTeCompliance 1.3.6.1.4.1.2011.5.25.151.3.1.1
The compliance statement for HUAWEI-TUNNEL-TE-MIB.
             hwTunnelTeGroups 1.3.6.1.4.1.2011.5.25.151.3.3
                 hwTunnelDiffServGroup 1.3.6.1.4.1.2011.5.25.151.3.3.1
Describes the different service mode of tunnel.
                 hwTunnelTeVsiGroup 1.3.6.1.4.1.2011.5.25.151.3.3.2
Describes the VSI binding of tunnel.
                 hwTunnelTeVllGroup 1.3.6.1.4.1.2011.5.25.151.3.3.3
Describes the VLL binding of tunnel.
                 hwTunnelTeL3vpnGroup 1.3.6.1.4.1.2011.5.25.151.3.3.4
Describes the L3VPN binding of tunnel.
                 hwTunnelTeStatisticsGroup 1.3.6.1.4.1.2011.5.25.151.3.3.5
Describes the up/down count of the TE tunnel.
                 hwCtTemplateGroup 1.3.6.1.4.1.2011.5.25.151.3.3.6
Describes CT template.
                 hwCtConfigCtGroup 1.3.6.1.4.1.2011.5.25.151.3.3.7
Describes the CT configuration of the TE tunnel interface.
                 hwCtStatisticsGroup 1.3.6.1.4.1.2011.5.25.151.3.3.8
Describes the CT of the TE tunnel interface.
                 hwTunnelTeTrapGroup 1.3.6.1.4.1.2011.5.25.151.3.3.9
The HUAWEI Tunnel Te trap info.
                 hwCtFlowTemplateGroup 1.3.6.1.4.1.2011.5.25.151.3.3.10
The table describes the CT-FLOW-Mapping template configuration on the device.
                 hwDsteInterfaceCfgGroup 1.3.6.1.4.1.2011.5.25.151.3.3.11
The table describes the CT-FLOW-Mapping template configuration on the device.