HUAWEI-PWE3-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-PWE3-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-MIB, SNMPv2-SMI, P-BRIDGE-MIB, HUAWEI-MIB, INET-ADDRESS-MIB, HUAWEI-VPLS-EXT-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwL2Vpn 1.3.6.1.4.1.2011.5.25.119
         hwL2VpnPwe3 1.3.6.1.4.1.2011.5.25.119.4
The HUAWEI-PWE3-MIB contains objects to manage PWE3.
             hwPwe3MIBObjects 1.3.6.1.4.1.2011.5.25.119.4.1
                 hwPwe3Objects 1.3.6.1.4.1.2011.5.25.119.4.1.1
                     hwPWVcTable 1.3.6.1.4.1.2011.5.25.119.4.1.1.1 no-access
This table is the VC configuration table. Users can create or delete a VC by it.
                         hwPWVcEntry 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1 no-access
Provides the information of a VC entry.
                             hwPWVcID 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.1 unsigned32 no-access
Index for the conceptual row identifying a PW within this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'.
                             hwPWVcType 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.2 hwl2vpnvcencapstype no-access
The type of the Virtual Circuit.This value indicate the service to be carried over this PW.
                             hwPWVcPeerAddrType 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.3 inetaddresstype read-only
Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support 'ipv4' only.
                             hwPWVcPeerAddr 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.4 ipaddress read-only
This object contain the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable (hwPWVcPeerAddrType is 'unknown').
                             hwPWVcStatus 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.5 integer read-only
Indicates the status of the PW in the local node. Currently, can't support 'plugout'. Enumeration: 'down': 2, 'backup': 4, 'up': 1, 'plugout': 3.
                             hwPWVcInboundLabel 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.6 unsigned32 read-only
For ldp vc, the value will be created by system automatically.
                             hwPWVcOutboundLabel 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.7 unsigned32 read-only
For ldp vc, the value will be created by system automatically.
                             hwPWVcSwitchSign 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.8 integer read-only
The sign of switch. Enumeration: 'ldpToldp': 3, 'upe': 4, 'staticTostatic': 1, 'ldpTostatic': 2.
                             hwPWVcSwitchID 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.9 unsigned32 read-only
Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element' of the switch PW.
                             hwPWVcSwitchPeerAddrType 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.10 inetaddresstype read-only
Denotes the address type of the peer node of the switch PW. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support 'ipv4' only.
                             hwPWVcSwitchPeerAddr 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.11 ipaddress read-only
This object contain the value of the peer node address of the switch PW of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable (hwPWVcSwitchPeerAddrType is 'unknown').
                             hwPWVcSwitchInboundLabel 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.12 unsigned32 read-only
For ldp vc, the value will be created by system automatically.
                             hwPWVcSwitchOutboundLabel 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.13 unsigned32 read-only
For ldp vc, the value will be created by system automatically.
                             hwPWVcGroupID 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.14 unsigned32 read-only
Used in the Group ID field sent to the peer PWES within the maintenance protocol used for PW setup. Applicable if pwVcOwner equal 'pwIdFecSignaling' or 'l2tpControlProtocol', should be set to zero otherwise. Currently, this value always be zero.
                             hwPWVcIfIndex 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.15 interfaceindexorzero read-only
Index of the interface (or the virtual interface) associated with the PW.
                             hwPWVcAcStatus 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.16 integer read-only
Local AC status. Currently, can't support 'plugout'. Enumeration: 'plugout': 3, 'up': 1, 'down': 2, 'notify': 4, 'notifyDown': 5, 'downNotify': 6.
                             hwPWVcACOAMStatus 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.17 integer read-only
Denotes the AC's protocol is operational or not. Enumeration: 'down': 2, 'up': 1.
                             hwPWVcMtu 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.18 integer32 read-only
If not equal zero, the optional Mtu object in the signaling protocol will be sent with this value, representing the locally supported MTU size over the interface (or the virtual interface) associated with the PW.
                             hwPWVcCtrlWord 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.19 hwenablevalue read-only
If signaling is used for PW establishment, this object indicates the status of the control word negotiation, and in both signaling or manual configuration indicates if CW is to be present or not for this PW.
                             hwPWVcVCCV 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.20 bits read-only
Indicates the optional VCCV capabilities of the PW. According to whether the control word is enabled, the value can be ccCw(0)|ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5) or ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5). The default value is ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5). Bits: 'cvIcmpping': 3, 'ccAlert': 1, 'ccCw': 0, 'cvBfd': 5, 'cvLspping': 4, 'ccTtl': 6, 'ccLabel': 2.
                             hwPWVcBandWidth 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.21 unsigned32 read-only
This object indicates the bandwidth. '0' is the default value.
                             hwPWVcMaxAtmCells 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.22 unsigned32 read-only
Indicates the max cell supported when vc type is atm.
                             hwPWVcTnlPolicyName 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.23 octet string read-only
Indicates the tunnel policy name used.
                             hwPWVcQoSBehaviorIndex 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.24 unsigned32 read-only
Indicates the traffic behavior Index when QOS is implemented. Currently,can't support.Return the default value is '0'.
                             hwPWVcExplicitPathName 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.25 displaystring read-only
Indicates the explicit path name set by the operator.Currently, can't support.
                             hwPWVcTemplateName 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.26 octet string read-only
Indicates the PW template index referenced.
                             hwPWVcSecondary 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.27 truthvalue read-only
Indicates whether or not the secondary PW is used.
                             hwPWVcUpTime 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.28 unsigned32 read-only
Indicates the duration when the PW keeps Up for the last time, in seconds.
                             hwPWOAMSync 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.29 truthvalue read-only
Denotes the AC and PSN are enable or not.
                             hwPWVCForBfdIndex 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.30 unsigned32 read-only
The index of PW for BFD.
                             hwPWVcDelayTime 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.31 unsigned32 read-only
The reroute delay time.
                             hwPWVcReroutePolicy 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.32 integer read-only
Reroute policy. Enumeration: 'none': 4, 'immediatelySwitch': 7, 'err': 5, 'never': 3, 'invalid': 6, 'delay': 1, 'immediately': 2.
                             hwPWVcResumeTime 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.33 unsigned32 read-only
The reroute resume time.
                             hwPWVcRerouteReason 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.34 hwl2vpnstatechangereason read-only
Last reroute reason.
                             hwPWVcLastRerouteTime 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.35 unsigned32 read-only
Last reroute time.
                             hwPWVcManualSetFault 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.36 truthvalue read-only
Denotes the manual has been set fault or not.
                             hwPWVcActive 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.37 truthvalue read-only
Denotes the current vc is active or not.
                             hwPWVcVrIfIndex 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.38 interfaceindexorzero read-only
Denotes the VRRP interface this PW binding to.
                             hwPWVcVrID 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.39 unsigned32 read-only
Denotes the VrID this PW binding to.
                             hwPWBFDDetectMultiplier 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.40 unsigned32 read-only
The multiple of detection time.
                             hwPWBFDMinReceiveInterval 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.41 unsigned32 read-only
The interval of bfd messages to be received.
                             hwPWBFDMinTransmitInterval 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.42 unsigned32 read-only
The interval of bfd messages to be sent.
                             hwPWDynamicBFDDetect 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.43 truthvalue read-only
This value indicates the capacitability to support dynamic BFD detect.
                             hwPWBFDRemoteVcID 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.44 unsigned32 read-only
In the multiple-hop model, the value of remote VC id.
                             hwPWEthOamType 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.45 integer read-only
This value indicates the type of ETH OAM. Enumeration: 'noEthOamCfg': 3, 'ethOam1ag': 1, 'ethOam3ah': 2.
                             hwPWCfmMaIndex 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.46 unsigned32 read-only
This value indicates the current CFM MA index.
                             hwPWVcUpStartTime 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.47 displaystring read-only
Specifies the time this PW status was Up(1).
                             hwPWVcUpSumTime 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.48 unsigned32 read-only
Indicates the accumulated time when the VC is Up, in seconds.
                             hwPWVcIfName 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.49 displaystring read-only
Name of the interface (or the virtual interface) associated with the PW.
                             hwPWVcRowStatus 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.51 rowstatus read-only
RowStatus for this Table. Restriction: The row must be created by 'createAndGo' handle only. Handle 'createAndWait' is forbidden. Not support modifying configuration.
                             hwPWVcAtmPackOvertime 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.52 unsigned32 read-only
Specifies the AtmPackOvertime.
                             hwPWVcPwJitterBufferDepth 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.53 unsigned32 read-only
Specifies the PwJitterBufferDepth.
                             hwPWVcPwTdmEncapsulationNum 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.54 unsigned32 read-only
Specifies the PwTdmEncapsulationNum.
                             hwPWVcPwIdleCode 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.55 unsigned32 read-only
Specifies the PwIdleCode.
                             hwPWVcPwRtpHeader 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.56 unsigned32 read-only
Specifies the PwRtpHeader.
                             hwPWVcSwitchTnlPolicyName 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.57 octet string read-only
Indicates the switch tunnel policy name used.
                             hwPWVcCfmMdIndex 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.58 unsigned32 read-only
This value indicates the current CFM MD index.
                             hwPWVcCfmMaName 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.59 octet string read-only
This value indicates the current CFM MA name used.
                             hwPWVcCfmMdName 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.60 octet string read-only
This value indicates the current CFM MD name used.
                             hwPWVcRawOrTagged 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.61 integer read-only
Specifies whether the raw or tagged is configured. Enumeration: 'raw': 1, 'tagged': 2, 'rawTagNotConfiged': 3.
                             hwPWVcInterworkingType 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.62 integer read-only
Specifies the interworking type of the VC entry. Enumeration: 'ipLayer2': 2, 'ipUnknown': 3, 'ipInterWorking': 1.
                             hwPWVcCir 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.63 unsigned32 read-only
Specifies the committed information rate, based on the VC entry.
                             hwPWVcPir 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.64 unsigned32 read-only
Specifies the peak information rate, based on the VC entry.
                             hwPWVcQosProfile 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.65 displaystring read-only
Specifies the QoS profile's name, based on the VC entry.
                             hwPWVcSwitchCir 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.66 unsigned32 read-only
Specifies the committed information rate, based on the switch VC entry.
                             hwPWVcSwitchPir 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.67 unsigned32 read-only
Specifies the peak information rate, based on the switch VC entry.
                             hwPWVcSwitchQosProfile 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.68 displaystring read-only
Specifies the QoS profile's name, based on the switch VC entry.
                             hwPWVcTrigger 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.69 truthvalue read-only
Specifies whether the PW remote interface shutdown or not.
                             hwPWVcEnableACOAM 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.70 enabledstatus read-only
Specifies whether ACOAM detection and notification are all enabled or not.
                             hwPWVcSwitchVrIfIndex 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.71 interfaceindexorzero read-only
Denotes the VRRP interface the switch PW binding to.
                             hwPWVcSwitchVrID 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.72 unsigned32 read-only
Denotes the VrID the switch PW binding to.
                             hwPWVcQosParaFromPWT 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.73 integer read-only
This object indicates the configuration of the Qos parameters managed through command line or PW template. Enumeration: 'unknown': 3, 'pwTemplate': 2, 'cliOrMib': 1.
                             hwPWVcBfdParaFromPWT 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.74 integer read-only
This object indicates the configuration of the Bfd parameters managed through command line or PW template. Enumeration: 'unknown': 3, 'pwTemplate': 2, 'cliOrMib': 1.
                             hwPwVcNegotiateMode 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.75 integer read-only
This object indicates the negotiation mode of the PW on the local node. Enumeration: 'independent': 2, 'frr': 4, 'slaveOrMaster': 1, 'unknown': 3.
                             hwPwVcIsBypass 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.76 truthvalue read-only
This object indicates whether the PW is the bypass PW.
                             hwPwVcIsAdmin 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.77 truthvalue read-only
This object indicates whether the PW is the administrator PW.
                             hwPwVcAdminPwIfIndex 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.78 interfaceindexorzero read-only
This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the service PW.
                             hwPwVcAdminPwLinkStatus 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.79 integer read-only
This object indicates the status of the administrator PW after it is being tracked by the service PW. Enumeration: 'down': 2, 'unknown': 3, 'up': 1.
                             hwPwVcSwitchAdminPwIfIndex 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.80 interfaceindexorzero read-only
This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch PW.
                             hwPwVcSwitchAdminPwLinkStatus 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.81 integer read-only
This object indicates the status of the administrator PW after it is being tracked by the switch PW. Enumeration: 'down': 2, 'unknown': 3, 'up': 1.
                             hwPwVcSwitchBackupAdminPwIfIndex 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.82 interfaceindexorzero read-only
This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch backup PW.
                             hwPwVcSwitchBackupAdminPwLinkStatus 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.83 integer read-only
This object indicates the status of the administrator PW after it is being tracked by the switch backup PW. Enumeration: 'down': 2, 'unknown': 3, 'up': 1.
                             hwPwVcSwitchBackupVcId 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.84 unsigned32 read-only
This object indicates the VC ID of the switch backup PW.
                             hwPwVcSwitchBackupVcPeerAddrType 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.85 inetaddresstype read-only
This object indicates type of the IP address of the peer on the switch backup PW. Currently, only IPv4 addresss are supported.
                             hwPwVcSwitchBackupVcPeerAddr 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.86 ipaddress read-only
This object indicates the IP address of the peer on the switch backup PW.
                             hwPwVcSwitchBackupVcReceiveLabel 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.87 unsigned32 read-only
This object indicates the inbound label of the switch backup VC. For a static VC, the value of the inbound label ranges from 16 to 1023. For a dynamic VC, the inbound label is automatically generated by the system.
                             hwPwVcSwitchBackupVcSendLabel 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.88 unsigned32 read-only
This object indicates the outbound label of the switch backup VC. For a static VC, the value of the outbound label ranges from 0 to 1048575. For a dynamic VC, the outbound label is automatically generated by the system.
                             hwPwVcSwitchBackupVcTnlPolicyName 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.89 octet string read-only
This object indicates the name of the tunnel policy of the switch backup VC.
                             hwPwVcSwitchBackupVcCir 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.90 unsigned32 read-only
This object indicates the CIR of the switch backup VC.
                             hwPwVcSwitchBackupVcPir 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.91 unsigned32 read-only
This object indicates the PIR of the switch backup VC.
                             hwPwVcSwitchBackupVcQosProfile 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.92 displaystring read-only
This object indicates the name of the QoS profile of the switch backup VC.
                             hwPwVcSlaveMasterMode 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.93 integer read-only
This object indicates whether the status of the VC is master or slave. Enumeration: 'master': 2, 'slave': 1, 'bypass': 4, 'unknown': 3.
                             hwPwVcSwitchVcSlaveMasterMode 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.94 integer read-only
This object indicates whether the status of the switch VC is master or slave. Enumeration: 'master': 2, 'slave': 1, 'unknown': 3.
                             hwPwVcSwitchBackupVcSlaveMasterMode 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.95 integer read-only
This object indicates whether the status of the switch backup VC is master or slave. Enumeration: 'master': 2, 'slave': 1, 'unknown': 3.
                             hwPwVcSwitchVcActive 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.96 truthvalue read-only
This object indicates whether the status of the switch VC is active or not.
                             hwPwVcSwitchBackupVcActive 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.97 truthvalue read-only
This object indicates whether the status of the switch backup VC is active or not.
                             hwPwVcSwitchCwTrans 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.98 truthvalue read-only
This object indicates whether the SPE support Control Word Transparent or not,default is false.
                             hwPwVcSwitchVcServiceName 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.99 octet string read-only
This object indicates the service name of the switch VC.
                             hwPwVcSwitchBackupVcServiceName 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.100 octet string read-only
This object indicates the service name of the switch backup VC.
                     hwPWVcTnlTable 1.3.6.1.4.1.2011.5.25.119.4.1.1.2 no-access
This table is used to search the tunnel index of a VC.
                         hwPWVcTnlEntry 1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1 no-access
Provides the information of a VC tunnel entry.
                             hwPWVcTnlIndex 1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1.1 unsigned32 no-access
This object indicates the tunnel index of the VC.
                             hwPWVcTnlType 1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1.2 integer read-only
This object indicates the tunnel type. Enumeration: 'crLsp': 4, 'gre': 2, 'lsp': 1, 'ipsec': 3.
                             hwPWTnlForBfdIndex 1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1.3 unsigned32 read-only
This object indicates the index of LSP for BFD.
                     hwPWVcStatisticsTable 1.3.6.1.4.1.2011.5.25.119.4.1.1.3 no-access
This table contains the Pwe3's VC packets statistics.
                         hwPWVcStatisticsEntry 1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1 no-access
Provides the information of the Pwe3's VC packets statistics.
                             hwPWVcStatisticsRcvPkts 1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.1 counter64 read-only
The total number of packets received on this VC.
                             hwPWVcStatisticsRcvBytes 1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.2 counter64 read-only
The total number of bytes received on this VC.
                             hwPWVcStatisticsSndPkts 1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.3 counter64 read-only
The total number of packets sent on this VC.
                             hwPWVcStatisticsSndBytes 1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.4 counter64 read-only
The total number of bytes sent on the VC.
                     hwPWRemoteVcTable 1.3.6.1.4.1.2011.5.25.119.4.1.1.4 no-access
This table provides remote PW information for each local PW.
                         hwPWRemoteVcEntry 1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1 no-access
An entry in this table is created by the agent for every PW.
                             hwPWRemoteVcID 1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.1 unsigned32 read-only
Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element' of the remote PW.
                             hwPWRemoteVcType 1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.2 hwl2vpnvcencapstype read-only
This value indicate the service to be carried over the remote PW.
                             hwPWRemoteVcStatus 1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.3 integer read-only
Indicates the forwarding status of the remote VC. Enumeration: 'down': 2, 'up': 1, 'plugout': 3.
                             hwPWRemoteVcGroupID 1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.4 unsigned32 read-only
Indicates the Group ID field of the remote PW. Currently, this value always be zero.
                             hwPWRemoteVcMtu 1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.5 unsigned32 read-only
Indicates the supported MTU size of the remote PW.
                             hwPWRemoteVcCtrlword 1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.6 hwenablevalue read-only
Indicates the control word capability of the remote PW.
                             hwPWRemoteVcMaxAtmCells 1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.7 unsigned32 read-only
Indicates the max cell supported of the remote PW when vctype is atm.
                             hwPWRemoteVcNotif 1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.8 truthvalue read-only
Indicates notification is supported by the remote PW.
                     hwPWVcSwitchNotifEnable 1.3.6.1.4.1.2011.5.25.119.4.1.1.5 hwenablevalue read-write
If this object is set to enable(1), then it enables the emission of hwPWVcSwitchWtoP and hwPWVcSwitchPtoW notifications; otherwise these notifications are not emitted. The default value is disable (2).
                     hwPWVcUpDownNotifEnable 1.3.6.1.4.1.2011.5.25.119.4.1.1.6 hwenablevalue read-write
This object indicates the enable sign of PW VC state change notification. The default value is disable (2).
                     hwPWVcDeletedNotifEnable 1.3.6.1.4.1.2011.5.25.119.4.1.1.7 hwenablevalue read-write
This object indicates the enable sign of PW VC deletion notification. The default value is disable (2).
                     hwPWVcStateChangeReason 1.3.6.1.4.1.2011.5.25.119.4.1.1.8 hwl2vpnstatechangereason no-access
This object indicates the reason of PE VC state change.
                     hwPWVcSwitchRmtID 1.3.6.1.4.1.2011.5.25.119.4.1.1.9 unsigned32 no-access
This object indicates the VC ID of PW switch between working PW and protect PW .
                     hwLdpPWStateChangeReason 1.3.6.1.4.1.2011.5.25.119.4.1.1.10 hwldppwstatechangereason no-access
This object indicates the reason of LDP PW VC's state change.
                     hwPWVcTDMPerfCurrentTable 1.3.6.1.4.1.2011.5.25.119.4.1.1.11 no-access
This table provides per TDM PW performance information. The contents of this table entry are reset to zero and gotten new information every 15 minutes.
                           hwPWVcTDMPerfCurrentEntry 1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1 no-access
An entry in this table is created by the agent for every TDM PW entry.
                               hwPWVcTDMPerfCurrentMissingPkts 1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.1 unsigned32 read-only
Number of missing packets (as detected via control word sequence number gaps).
                               hwPWVcTDMPerfCurrentJtrBfrOverruns 1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.2 unsigned32 read-only
Number of times the jitter buffer was overrun.
                               hwPWVcTDMPerfCurrentJtrBfrUnderruns 1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.3 unsigned32 read-only
Number of times a packet needed to be played out and the jitter buffer was empty.
                               hwPWVcTDMPerfCurrentMisOrderDropped 1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.4 unsigned32 read-only
Number of packets detected out of order (via control word sequence numbers) that could not be re-ordered or could not fit in the jitter buffer.
                               hwPWVcTDMPerfCurrentMalformedPkt 1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.5 unsigned32 read-only
Number of packets detected with unexpected size or bad headers' stack.
                               hwPWVcTDMPerfCurrentESs 1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.6 unsigned32 read-only
The counter associated with the number of Error Seconds encountered. Any malformed packet, sequence error, LOPS, and the like are considered as Error Seconds.
                               hwPWVcTDMPerfCurrentSESs 1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.7 unsigned32 read-only
The counter associated with the number of Severely Error Seconds encountered.
                               hwPWVcTDMPerfCurrentUASs 1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.8 unsigned32 read-only
The counter associated with the number of Unavailable Seconds encountered. Any consecutive ten seconds of SES are counted as one Unavailable Seconds (UAS).
                 hwPwe3MIBTraps 1.3.6.1.4.1.2011.5.25.119.4.1.2
                     hwPWVcSwitchWtoP 1.3.6.1.4.1.2011.5.25.119.4.1.2.1
This notification is generated when switch from working PW to protect PW happens.
                     hwPWVcSwitchPtoW 1.3.6.1.4.1.2011.5.25.119.4.1.2.2
This notification is generated when switch from protect PW to working PW happens.
                     hwPWVcDown 1.3.6.1.4.1.2011.5.25.119.4.1.2.3
This notification indicates the VC's state changes to down.
                     hwPWVcUp 1.3.6.1.4.1.2011.5.25.119.4.1.2.4
This notification indicates the VC's state changes to up.
                     hwPWVcDeleted 1.3.6.1.4.1.2011.5.25.119.4.1.2.5
This notification indicates the VC is deleted.
                     hwPWVcBackup 1.3.6.1.4.1.2011.5.25.119.4.1.2.6
This notification indicates the VC's state changes to backup.
                     hwLdpPWVcDown 1.3.6.1.4.1.2011.5.25.119.4.1.2.7
This notification indicates the LDP PW VC's state changes to down.
                     hwLdpPWVcUp 1.3.6.1.4.1.2011.5.25.119.4.1.2.8
This notification indicates the Ldp PW VC's state changes to up.
                 hwSvcObjects 1.3.6.1.4.1.2011.5.25.119.4.1.3
                     hwSvcTable 1.3.6.1.4.1.2011.5.25.119.4.1.3.1 no-access
This table is the SVC configuration table. Users can create or delete a SVC by it.
                         hwSvcEntry 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1 no-access
Provides the information of a SVC entry.
                             hwSvcIfIndex 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.1 interfaceindexorzero no-access
Index of the interface (or the virtual interface) associated with the PW.
                             hwSvcID 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.2 unsigned32 read-only
Index for the conceptual row identifying a PW within this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'.
                             hwSvcType 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.3 hwl2vpnvcencapstype read-only
Index for the conceptual row identifying a PW within this PW Emulation table.This value indicate the service to be carried over this PW.
                             hwSvcPeerAddrType 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.4 inetaddresstype read-only
Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support 'ipv4' only.
                             hwSvcPeerAddr 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.5 ipaddress read-only
This object contain the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable (hwSvcPeerAddrType is 'unknown').
                             hwSvcStatus 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.6 integer read-only
Indicates the status of the PW in the local node. Currently, can't support 'plugout'. Enumeration: 'down': 2, 'up': 1, 'plugout': 3.
                             hwSvcInboundLabel 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.7 unsigned32 read-only
This object indicates the inbound label.
                             hwSvcOutboundLabel 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.8 unsigned32 read-only
This object indicates the outbound label.
                             hwSvcGroupID 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.9 unsigned32 read-only
Used in the Group ID field sent to the peer PWES within the maintenance protocol used for PW setup. Applicable if SvcOwner equal 'pwIdFecSignaling' or 'l2tpControlProtocol', should be set to zero otherwise. Currently, this value always be zero.
                             hwSvcAcStatus 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.10 integer read-only
Local AC status. Currently, can't support 'plugout'. Enumeration: 'down': 2, 'up': 1, 'plugout': 3.
                             hwSvcACOAMStatus 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.11 integer read-only
Denotes the AC's protocol is operational or not. Enumeration: 'down': 2, 'up': 1.
                             hwSvcMtu 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.12 integer32 read-only
If not equal zero, the optional Mtu object in the signaling protocol will be sent with this value, representing the locally supported MTU size over the interface (or the virtual interface) associated with the PW.Currently, can't support.'0' is the default value.
                             hwSvcCtrlWord 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.13 hwenablevalue read-only
If signaling is used for PW establishment, this object indicates the status of the control word negotiation, and in both signaling or manual configuration indicates if CW is to be present or not for this PW.
                             hwSvcVCCV 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.14 bits read-only
Indicates the optional VCCV capabilities of the SVC. According to whether the control word is enabled, the value can be ccCw(0)|ccAlert(1)|cvLspping(4)|cvBfd(5) or ccAlert(1)|cvLspping(4)|cvBfd(5). The default value is ccAlert(1)|cvLspping(4)|cvBfd(5). Bits: 'cvIcmpping': 3, 'ccAlert': 1, 'ccCw': 0, 'cvBfd': 5, 'cvLspping': 4, 'ccLabel': 2.
                             hwSvcBandWidth 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.15 unsigned32 read-only
This object indicates the bandwidth.Currently, can't support.'0' is the default value.
                             hwSvcMaxAtmCells 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.16 unsigned32 read-only
Indicates the max cell supported when vc type is atm.
                             hwSvcTnlPolicyName 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.17 octet string read-only
Indicates the tunnel policy name used.
                             hwSvcQoSBehaviorIndex 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.18 unsigned32 read-only
Indicates the traffic behavior Index when QOS is implemented. Currently, can't support.'0' is the default value.
                             hwSvcPWTemplateName 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.19 octet string read-only
Indicates the PW template index referenced.
                             hwSvcUpTime 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.20 unsigned32 read-only
Indicates the duration when the SVC keeps Up for the last time, in seconds.
                             hwSvcOAMSync 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.21 truthvalue read-only
Denotes the AC and PSN are enable or not.
                             hwSvcForBfdIndex 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.22 unsigned32 read-only
The index of PW for BFD.Currently, can't support.Return the default value is '0'.
                             hwSvcSecondary 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.23 truthvalue read-only
Indicates whether or not the secondary PW is used.Currently, can't support.Return the default value is 'false'.
                             hwSvcDelayTime 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.24 unsigned32 read-only
The reroute delay time.Currently, can't support.Return the default value is '0'.
                             hwSvcReroutePolicy 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.25 integer read-only
Reroute policy.Currently, can't support.Return the default value is 'invalid(6)'. Enumeration: 'none': 4, 'err': 5, 'never': 3, 'invalid': 6, 'delay': 1, 'immediately': 2.
                             hwSvcResumeTime 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.26 unsigned32 read-only
The reroute resume time.Currently, can't support.Return the default value is '0'.
                             hwSvcRerouteReason 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.27 hwl2vpnstatechangereason read-only
Last reroute reason.Currently, can't support.Return the default value is 'invalidReason(1)'.
                             hwSvcLastRerouteTime 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.28 unsigned32 read-only
Last reroute time.Currently, can't support.Return the default value is '0'.
                             hwSvcManualSetFault 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.29 truthvalue read-only
Denotes the manual has been set fault or not.Currently, can't support.Return the default value is 'false'.
                             hwSvcActive 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.30 truthvalue read-only
Denotes the current vc is active or not.Currently, can't support.Return the default value is 'false'.
                             hwSvcUpStartTime 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.31 displaystring read-only
Specifies the time this PW status was Up(1).
                             hwSvcUpSumTime 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.32 unsigned32 read-only
Indicates the accumulated time when the SVC is Up, in seconds.
                             hwSvcAtmPackOvertime 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.33 unsigned32 read-only
Specifies the AtmPackOvertime.
                             hwSvcPwJitterBufferDepth 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.34 unsigned32 read-only
Specifies the PwJitterBufferDepth.
                             hwSvcPwTdmEncapsulationNum 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.35 unsigned32 read-only
Specifies the PwTdmEncapsulationNum.
                             hwSvcPwIdleCode 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.36 unsigned32 read-only
Specifies the PwIdleCode.
                             hwSvcPwRtpHeader 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.37 unsigned32 read-only
Specifies the PwRtpHeader.
                             hwSvcRawOrTagged 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.38 integer read-only
Specifies whether the VLAN tag of the SVC entry is attached or stripped. Enumeration: 'raw': 1, 'tagged': 2, 'rawTagNotConfiged': 3.
                             hwSvcInterworkingType 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.39 integer read-only
Specifies the interworking type of the SVC entry. Enumeration: 'ipLayer2': 2, 'ipUnknown': 3, 'ipInterWorking': 1.
                             hwSvcCir 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.40 unsigned32 read-only
Specifies the committed information rate, based on the SVC entry.
                             hwSvcPir 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.41 unsigned32 read-only
Specifies the peak information rate, based on the SVC entry.
                             hwSvcQosProfile 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.42 displaystring read-only
Specifies the QoS profile's name, based on the SVC entry.
                             hwSvcRowStatus 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.51 rowstatus read-only
RowStatus for this Table. Restriction: The row must be created by 'createAndGo' handle only. Handle 'createAndWait' is forbidden. Not support modifying configuration.
                     hwSvcTnlTable 1.3.6.1.4.1.2011.5.25.119.4.1.3.2 no-access
This table is used to search the tunnel index of a SVC.
                         hwSvcTnlEntry 1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1 no-access
Provides the information of a SVC tunnel entry.
                             hwSvcTnlIndex 1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1.1 unsigned32 no-access
This object indicates the tunnel index of the SVC.
                             hwSvcTnlType 1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1.2 integer read-only
This object indicates the tunnel type. Enumeration: 'crLsp': 4, 'gre': 2, 'lsp': 1, 'ipsec': 3.
                             hwSvcTnlForBfdIndex 1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1.3 unsigned32 read-only
This object indicates the index of LSP for BFD. Currently, can't support.Return the default value is '0'.
                     hwSvcStatisticsTable 1.3.6.1.4.1.2011.5.25.119.4.1.3.3 no-access
This table contains the L2vpn's SVC packets statistics.
                         hwSvcStatisticsEntry 1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1 no-access
Provides the information of the L2VPN's SVC packets Statistics.
                             hwSvcStatisticsRcvPkts 1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.1 counter64 read-only
The total number of packets received on this SVC.
                             hwSvcStatisticsRcvBytes 1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.2 counter64 read-only
The total number of bytes received on this SVC.
                             hwSvcStatisticsSndPkts 1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.3 counter64 read-only
The total number of packets sent on this SVC.
                             hwSvcStatisticsSndBytes 1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.4 counter64 read-only
The total number of bytes sent on the SVC.
                     hwSvcSwitchNotifEnable 1.3.6.1.4.1.2011.5.25.119.4.1.3.4 hwenablevalue read-write
If this object is set to enable(1), then it enables the emission of hwSvcSwitchWtoP and hwSvcSwitchPtoW notifications; otherwise these notifications are not emitted.Currently, can't support. The default value is disable (2).
                     hwSvcUpDownNotifEnable 1.3.6.1.4.1.2011.5.25.119.4.1.3.5 hwenablevalue read-write
This object indicates the enable sign of PW VC state change notification. The default value is disable (2).
                     hwSvcDeletedNotifEnable 1.3.6.1.4.1.2011.5.25.119.4.1.3.6 hwenablevalue read-write
This object indicates the enable sign of PW VC deletion notification. The default value is disable (2).
                     hwSvcStateChangeReason 1.3.6.1.4.1.2011.5.25.119.4.1.3.7 hwl2vpnstatechangereason no-access
This object indicates the reason of PE VC state change.
                 hwL2vpnSvcMIBTraps 1.3.6.1.4.1.2011.5.25.119.4.1.4
                     hwSvcSwitchWtoP 1.3.6.1.4.1.2011.5.25.119.4.1.4.1
This notification is generated when switch from working PW to protect PW happens.Currently, can't support.
                     hwSvcSwitchPtoW 1.3.6.1.4.1.2011.5.25.119.4.1.4.2
This notification is generated when switch from protect PW to working PW happens.Currently, can't support.
                     hwSvcDown 1.3.6.1.4.1.2011.5.25.119.4.1.4.3
This notification indicates the SVC's state changes to down.
                     hwSvcUp 1.3.6.1.4.1.2011.5.25.119.4.1.4.4
This notification indicates the SVC's state changes to up.
                     hwSvcDeleted 1.3.6.1.4.1.2011.5.25.119.4.1.4.5
This notification indicates the SVC is deleted.
                 hwPWTemplateTable 1.3.6.1.4.1.2011.5.25.119.4.1.5 no-access
This table specifies information for configuring and status monitoring to PW tempalte.
                     hwPWTemplateEntry 1.3.6.1.4.1.2011.5.25.119.4.1.5.1 no-access
A row in this table represents a pseudo wire (PW) template. It is indexed by hwPWCmdTemplateIndex, which uniquely identifying a singular tempalte.
                         hwPWTemplateName 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.1 octet string no-access
The name of the PW template. Set by the operator to indicate the protocol responsible for establishing this PW. The value 'static' is used in all cases where no maintenance protocol (PW signaling) is used to set-up the PW, i.e. require configuration of entries in the PW tables including PW labels, etc. The value 'ldp' is used in case of signaling with the PWid FEC element with LDP signaling. The value 'rsvp' indicate the use of rsvp control protocol.
                         hwPWTemplatePeerAddrType 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.2 inetaddresstype read-only
Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support 'ipv4' only.
                         hwPWTemplatePeerAddr 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.3 ipaddress read-only
This object contain the value of the peer node address of the PW/PE maintenance protocol entity.
                         hwPWTemplateCtrlword 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.4 hwenablevalue read-only
Indicates the control word capability of the switch PW.
                         hwPWTemplateVCCV 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.5 bits read-only
Indicates the optional VCCV capabilities of the PW template. According to whether the control word is enabled, the value can be ccCw(0)|ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5) or ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5). The default value is ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5). Bits: 'cvIcmpping': 3, 'ccAlert': 1, 'ccCw': 0, 'cvBfd': 5, 'cvLspping': 4, 'ccTtl': 6, 'ccLabel': 2.
                         hwPWTemplateFrag 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.6 truthvalue read-only
Indicates whether or not fragmentaion is supported.
                         hwPWTemplateBandwidth 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.7 integer32 read-only
Indicates the bandwitdh when signaling protocol is rsvp. Currently, can't support.'0' is the default value.
                         hwPWTemplateTnlPolicyName 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.8 octet string read-only
Indicates the tunnel policy name used.
                         hwPWTemplateQoSBehaviorIndex 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.9 integer32 read-only
Indicates the traffic behavior Index when QOS is implemented.Currently, can't support.'0' is the default value.
                         hwPWTemplateExplicitPathName 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.10 octet string read-only
Indicates the explicit path name set by the operator.Currently, can't support.
                         hwPWTemplateBFDDetectMultiplier 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.11 unsigned32 read-only
The multiple of detection time.
                         hwPWTemplateBFDMinReceiveInterval 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.12 unsigned32 read-only
The interval of bfd messages to be received.
                         hwPWTemplateBFDMinTransmitInterval 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.13 unsigned32 read-only
The interval of bfd messages to be sent.
                         hwPWTemplateDynamicBFDDetect 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.14 truthvalue read-only
This value indicates the capacitability to support dynamic BFD detect.
                         hwPWTemplateMaxAtmCells 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.15 unsigned32 read-only
Specifies the MaxAtmCells.
                         hwPWTemplateAtmPackOvertime 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.16 unsigned32 read-only
Specifies the AtmPackOvertime.
                         hwPWTemplatePwJitterBufferDepth 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.17 unsigned32 read-only
Specifies the PwJitterBufferDepth.
                         hwPWTemplatePwTdmEncapsulationNum 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.18 unsigned32 read-only
Specifies the PwTdmEncapsulationNum.
                         hwPWTemplatePwIdleCode 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.19 unsigned32 read-only
Specifies the PwIdleCode.
                         hwPWTemplatePwRtpHeader 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.20 unsigned32 read-only
Specifies the PwRtpHeader.
                         hwPWTemplatePwCCSeqEnable 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.21 hwenablevalue read-only
Specifies the CC Sequence is enable or not.
                         hwPWTemplateCir 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.22 unsigned32 read-only
Specifies the committed information rate, based on the PW template entry.
                         hwPWTemplatePir 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.23 unsigned32 read-only
Specifies the peak information rate, based on the PW template entry.
                         hwPWTemplateQosProfile 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.24 displaystring read-only
Specifies the QoS profile's name, based on the PW template entry.
                         hwPWTemplateFlowLabel 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.25 enabledstatus read-only
The value of this object identifies whether the PW FlowLabel is enabled.
                         hwPWTemplateRowStatus 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.51 rowstatus read-only
RowStatus for this Table. Restriction: The row must be created by 'createAndGo' handle only. Handle 'createAndWait' is forbidden.
                 hwPWTemplateMIBTraps 1.3.6.1.4.1.2011.5.25.119.4.1.6
                     hwPWTemplateCannotDeleted 1.3.6.1.4.1.2011.5.25.119.4.1.6.1
This notification indicates the PWTemplate cannot be deleted.
                 hwPWTableObjects 1.3.6.1.4.1.2011.5.25.119.4.1.7
                     hwPWTable 1.3.6.1.4.1.2011.5.25.119.4.1.7.1 no-access
This table indicates a PW, that is Static PW or LDP PW
                         hwPWEntry 1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1 no-access
Provides the information of a VC key entry.
                             hwPWId 1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.1 unsigned32 no-access
Index for the conceptual row identifying a PW within this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'.
                             hwPWType 1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.2 hwl2vpnvcencapstype no-access
Index for the conceptual row identifying a PW within this PW Emulation table.This value indicate the service to be carried over this PW.
                             hwPWPeerIp 1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.3 ipaddress no-access
This object contain the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable.
                             hwPWInterfaceIndex 1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.4 interfaceindexorzero read-only
Index of the interface (or the virtual interface) associated with the PW.
             hwPwe3MIBConformance 1.3.6.1.4.1.2011.5.25.119.4.3
                 hwPwe3MIBCompliances 1.3.6.1.4.1.2011.5.25.119.4.3.1
                     hwPwe3MIBCompliance 1.3.6.1.4.1.2011.5.25.119.4.3.1.1
The compliance statement for systems supporting the HUAWEI-PWE3-MIB.
                 hwPwe3MIBGroups 1.3.6.1.4.1.2011.5.25.119.4.3.2
                     hwPWVcGroup 1.3.6.1.4.1.2011.5.25.119.4.3.2.1
The Pwe3's VC group.
                     hwPWVcTnlGroup 1.3.6.1.4.1.2011.5.25.119.4.3.2.2
The PWE3's VC Tunnel group.
                     hwPWVcStatisticsGroup 1.3.6.1.4.1.2011.5.25.119.4.3.2.3
The PWE3's VC Statistics group.
                     hwPWRemoteVcGroup 1.3.6.1.4.1.2011.5.25.119.4.3.2.4
The PWE3's Remote VC group.
                     hwPWTemplateGroup 1.3.6.1.4.1.2011.5.25.119.4.3.2.5
The PWE3's Template group.
                     hwPWNotificationControlGroup 1.3.6.1.4.1.2011.5.25.119.4.3.2.6
The PWE3's Notification Control group.
                     hwPWVcStateChangeReasonGroup 1.3.6.1.4.1.2011.5.25.119.4.3.2.7
The PWE3's Vc State Reason group.
                     hwPWVcNotificationGroup 1.3.6.1.4.1.2011.5.25.119.4.3.2.8
The PWE3's VC Notification group.
                     hwLdpPWStateChangeReasonGroup 1.3.6.1.4.1.2011.5.25.119.4.3.2.9
The LDP PW VC State Reason group.
                     hwPWVcTDMPerfCurrentGroup 1.3.6.1.4.1.2011.5.25.119.4.3.2.10
The PWE3's VC TDM performance information group.
                 hwL2vpnSvcMIBGroups 1.3.6.1.4.1.2011.5.25.119.4.3.3
                     hwSvcGroup 1.3.6.1.4.1.2011.5.25.119.4.3.3.1
The L2vpn's SVC group.
                     hwSvcTnlGroup 1.3.6.1.4.1.2011.5.25.119.4.3.3.2
The L2vpn's SVC Tunnel group.
                     hwSvcStatisticsGroup 1.3.6.1.4.1.2011.5.25.119.4.3.3.3
The L2vpn's SVC Statistics group.
                     hwSvcNotificationControlGroup 1.3.6.1.4.1.2011.5.25.119.4.3.3.4
The L2vpn SVC's Notification Control group.
                     hwSvcStateChangeReasonGroup 1.3.6.1.4.1.2011.5.25.119.4.3.3.5
The L2vpn's SVc State Reason group.
                     hwSvcNotificationGroup 1.3.6.1.4.1.2011.5.25.119.4.3.3.6
The L2vpn's SVC Notification group.
                 hwL2vpnPWTableMIBGroups 1.3.6.1.4.1.2011.5.25.119.4.3.4
                     hwPWTableGroup 1.3.6.1.4.1.2011.5.25.119.4.3.4.1
The PW Table Group.