HUAWEI-MPLS-EXTEND-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-MPLS-EXTEND-MIB
Download as:   
SNMPv2-CONF, MPLS-TC-STD-MIB, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, HUAWEI-MIB, MPLS-TE-STD-MIB, INET-ADDRESS-MIB, MPLS-LSR-STD-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwMplsExtendMib 1.3.6.1.4.1.2011.5.25.121
This MIB is used for defining the HUAWEI private extended Multiprotocol Label Switching (MPLS) MIB object. All MIB objects are used to describe private managed objects and trap definitions for MPLS.
         hwMplsExtendMibTunnel 1.3.6.1.4.1.2011.5.25.121.1
             hwMplsTunnelTable 1.3.6.1.4.1.2011.5.25.121.1.1 no-access
A tunnel needs to be uniquely identified across an MPLS network. Indexes hwMplsTunnelIndex and hwMplsTunnelInstance uniquely identify a tunnel on the LSR originating the tunnel. hwMplsTunnelIngressLSRId uniquely identifies a tunnel across an MPLS network. The last index hwMplsTunnelEgressLSRId is useful in identifying all instances of a tunnel that are terminated on the same egress LSR. The indexes of this table are hwMplsTunnelIndex, hwMplsTunnelInstance, hwMplsTunnelIngressLSRId and hwMplsTunnelEgressLSRId.
                 hwMplsTunnelEntry 1.3.6.1.4.1.2011.5.25.121.1.1.1 no-access
A tunnel needs to be uniquely identified across an MPLS network. Indexes hwMplsTunnelIndex and hwMplsTunnelInstance uniquely identify a tunnel on the LSR originating the tunnel. hwMplsTunnelIngressLSRId uniquely identifies a tunnel across an MPLS network. The last index hwMplsTunnelEgressLSRId is useful in identifying all instances of a tunnel that are terminated on the same egress LSR. The indexes of this entry are hwMplsTunnelIndex, hwMplsTunnelInstance, hwMplsTunnelIngressLSRId and hwMplsTunnelEgressLSRId.
                     hwMplsTunnelIndex 1.3.6.1.4.1.2011.5.25.121.1.1.1.1 mplstunnelindex no-access
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. When the MPLS signalling protocol is rsvp(2), this value equals to the value signaled in the Tunnel ID of the SESSION object. When the MPLS signalling protocol is crldp(3), this value equals to the value signaled in the LSP ID. Reference to MPLS-TE-STD-MIB.
                     hwMplsTunnelInstance 1.3.6.1.4.1.2011.5.25.121.1.1.1.2 mplstunnelinstanceindex no-access
Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is used to identify multiple instances of tunnels for backup and parallel tunnels. When the MPLS signaling protocol is rsvp(2), this value equals to the LSP ID of the Sender Template object. When the signaling protocol is crldp(3) there is no equivalent signaling object. Reference to MPLS-TE-STD-MIB.
                     hwMplsTunnelIngressLSRId 1.3.6.1.4.1.2011.5.25.121.1.1.1.3 mplsextendedtunnelid no-access
Indicates the ingress LSR ID of this tunnel. When the MPLS signalling protocol is rsvp(2), this value equals to the Tunnel Sender Address in the Sender Template object and may equal to the Extended Tunnel ID in the SESSION object. When the MPLS signalling protocol is crldp(3), this value equals to the Ingress LSR Router ID in the LSPID TLV object. Reference to MPLS-TE-STD-MIB.
                     hwMplsTunnelEgressLSRId 1.3.6.1.4.1.2011.5.25.121.1.1.1.4 mplsextendedtunnelid no-access
Indicates the egress LSR ID of this tunnel. Reference to MPLS-TE-STD-MIB.
                     hwMplsTunnelClassType 1.3.6.1.4.1.2011.5.25.121.1.1.1.5 integer read-only
Indicates the bandwidth type used by this tunnel. Options: 1. bc0(1) -indicates the bandwidth type is bc0. 2. bc1(2) -indicates the bandwidth type is bc1. 3. invalidValue(3) -indicates the invalid value. Enumeration: 'invalidValue': 3, 'bc0': 1, 'bc1': 2.
                     hwMplsTunnelBandwidth 1.3.6.1.4.1.2011.5.25.121.1.1.1.6 integer32 read-only
Indicates the bandwidth used by this tunnel. Unit: kbit/s
                     hwMplsTunnelAdminStatus 1.3.6.1.4.1.2011.5.25.121.1.1.1.7 integer read-only
Indicates the management status of this tunnel.Reference to MPLS-TE-STD-MIB. Options: 1. up(1) -indicates the management status of this tunnel is up. 2. down(2) -indicates the management status of this tunnel is down. 3. testing(3) -indicates the tunnel is used in some test mode. Enumeration: 'down': 2, 'testing': 3, 'up': 1.
                     hwMplsTunnelOperStatus 1.3.6.1.4.1.2011.5.25.121.1.1.1.8 integer read-only
Indicates the actual operational status of this tunnel, which is but not limited to the status of this tunnel of a certain period.Reference to MPLS-TE-STD-MIB. Options: 1. up(1) -indicates that the operational status of this tunnel is up. 2. down(2) -indicates that the operational status of this tunnel is down. 3. testing(3) -indicates that the tunnel is used in some test mode. 4. unknown(4) -indicates the invalid value. 5. dormant(5) -indicates that the status cannot be determined. 6. notPresent(6) -indicates that some component is missing 7. lowerLayerDown(7) -indicates the Down state due to the state of lower layer interfaces. Enumeration: 'dormant': 5, 'lowerLayerDown': 7, 'unknown': 4, 'testing': 3, 'up': 1, 'down': 2, 'notPresent': 6.
                     hwMplsTunnelSessionAttr 1.3.6.1.4.1.2011.5.25.121.1.1.1.9 bits read-only
Indicates protection types desired by the primary tunnel, such as node protection, link protection or bandwidth protection. Options: 1. localProtectionDesired(0) -indicates link protection. 2. nodeProtectionDesired(1) -indicates node protection. 3. bandwidthProtectionDesired(2) -indicates bandwidth protection. Bits: 'nodeProtectionDesired': 1, 'localProtectionDesired': 0, 'bandwidthProtectionDesired': 2.
                     hwMplsTunnelFrrSetupPrio 1.3.6.1.4.1.2011.5.25.121.1.1.1.10 unsigned32 read-only
Indicates the setup PRI of auto-bypass tunnel. Range: 0-7 Default: 7
                     hwMplsTunnelFrrHoldingPrio 1.3.6.1.4.1.2011.5.25.121.1.1.1.11 unsigned32 read-only
Indicates the holding PRI of auto-bypass tunnel. Range: 0-7 Default: 7
                     hwMplsTunnelFrrBandwidth 1.3.6.1.4.1.2011.5.25.121.1.1.1.12 unsigned32 read-only
Indicates the protecting bandwidth of auto-bypass tunnel. Its value is defined by the configuration on the primary tunnel. Unit: kbit/s
                     hwMplsTunnelFrrSwitchover 1.3.6.1.4.1.2011.5.25.121.1.1.1.13 counter32 read-only
Indicates FRR switching times
                     hwMplsTunnelFrrBypassTableIndex 1.3.6.1.4.1.2011.5.25.121.1.1.1.14 unsigned32 read-only
Indicates the index of the bypass tunnel table, that is, the LSP ID of the bypass tunnel. The bypass table shows interfaces protected by specified bypass tunnel.
                     hwMplsTunnelFrrARHopTableIndex 1.3.6.1.4.1.2011.5.25.121.1.1.1.15 unsigned32 read-only
Indicates the table index of the protection type adopted by each hop of the primary tunnel.
                     hwMplsTunnelName 1.3.6.1.4.1.2011.5.25.121.1.1.1.16 snmpadminstring read-only
Indicates the tunnel name. The name can refer to the tunnel on the console port of the LSR. If mplsTunnelIsIf is set to True, the IfName of the interface corresponding to this tunnel should have a value equal to hwMplsTunnelName. Reference to the description of IfName in RFC 2863.
                     hwMplsTunnelIfIndex 1.3.6.1.4.1.2011.5.25.121.1.1.1.17 unsigned32 read-only
Indicates the interface index of the tunnel. It uniquely identifies the tunnel name.
                     hwMplsTunnelPreBandwidth 1.3.6.1.4.1.2011.5.25.121.1.1.1.18 unsigned32 read-only
Indicates the original bandwidth of the tunnel when the tunnel is in the Modify state. Unit: kbit/s
                     hwMplsTunnelNextBandwidth 1.3.6.1.4.1.2011.5.25.121.1.1.1.19 unsigned32 read-only
Indicates the bandwidth of the tunnel that is to be changed when the tunnel is in the Modify state. Unit: kbit/s
                     hwMplsTunnelCt0Bandwidth 1.3.6.1.4.1.2011.5.25.121.1.1.1.20 unsigned32 read-only
The bandwidth of Class-Type 0 (CT0) in this tunnel, in kbit/s. If all CT bandwidths are 0s, it means that this tunnel's Class-Type is CT0, and bandwidth is 0 kbit/s. Unit: kbit/s
                     hwMplsTunnelCt1Bandwidth 1.3.6.1.4.1.2011.5.25.121.1.1.1.21 unsigned32 read-only
The bandwidth of Class-Type 1 (CT1) in this tunnel, in kbit/s. Unit: kbit/s
                     hwMplsTunnelCt2Bandwidth 1.3.6.1.4.1.2011.5.25.121.1.1.1.22 unsigned32 read-only
The bandwidth of Class-Type 2 (CT2) in this tunnel, in kbit/s. Unit: kbit/s
                     hwMplsTunnelCt3Bandwidth 1.3.6.1.4.1.2011.5.25.121.1.1.1.23 unsigned32 read-only
The bandwidth of Class-Type 3 (CT3) in this tunnel, in kbit/s. Unit: kbit/s
                     hwMplsTunnelCt4Bandwidth 1.3.6.1.4.1.2011.5.25.121.1.1.1.24 unsigned32 read-only
The bandwidth of Class-Type 4 (CT4) in this tunnel, in kbit/s. Unit: kbit/s
                     hwMplsTunnelCt5Bandwidth 1.3.6.1.4.1.2011.5.25.121.1.1.1.25 unsigned32 read-only
The bandwidth of Class-Type 5 (CT5) in this tunnel, in kbit/s. Unit: kbit/s
                     hwMplsTunnelCt6Bandwidth 1.3.6.1.4.1.2011.5.25.121.1.1.1.26 unsigned32 read-only
The bandwidth of Class-Type 6 (CT6) in this tunnel, in kbit/s. Unit: kbit/s
                     hwMplsTunnelCt7Bandwidth 1.3.6.1.4.1.2011.5.25.121.1.1.1.27 unsigned32 read-only
The bandwidth of Class-Type 7 (CT7) in this tunnel, in kbit/s. Unit: kbit/s
                     hwMplsTunnelLspType 1.3.6.1.4.1.2011.5.25.121.1.1.1.28 integer read-only
This object is meaningful only at the ingress of the tunnel. It indicates LSP types. Options: 0. invalid(0) -indicates that the LSP type is invalid, the possible cause is that the LSP is not created at an ingress. 1. primary(1) -indicates the primary LSP 2. primaryModifing(2) -indicates the LSP that will replace the primary LSP 3. hotStandby(3) -indicates the hot-standby LSP 4. hotStandbyModifing(4) -indicates the LSP that will replace the hot-standby LSP 5. ordinary(5) -indicates the ordinary LSP 6. ordinaryModifing(6) -indicates the LSP that will replace the ordinary LSP 7. bestEffort(7) -indicates the Best-Effort LSP 8. bestEffortModifing(8) -indicates the LSP that will replace the Best-Effort LSP Modifying LSPs are created when users modify the make-before-break attribute of the corresponding LSP types. After being created, modifying LSPs replace the corresponding LSPs to transmit traffic. Enumeration: 'ordinaryModifing': 6, 'bestEffortModifing': 8, 'primary': 1, 'invalid': 0, 'bestEffort': 7, 'primaryModifing': 2, 'hotStandbyModifing': 4, 'ordinary': 5, 'hotStandby': 3.
                     hwMplsTunnelInterfaceName 1.3.6.1.4.1.2011.5.25.121.1.1.1.29 snmpadminstring read-only
Indicates the tunnel interface name. The object is only valid at the ingress.
                     hwMplsTunnelSignalProto 1.3.6.1.4.1.2011.5.25.121.1.1.1.30 integer read-only
Indicates the signal protocol of this tunnel Enumeration: 'static': 2, 'rsvpTE': 1, 'staticCR': 3.
                     hwMplsTunnelType 1.3.6.1.4.1.2011.5.25.121.1.1.1.31 integer read-only
This object is meaningful only at the ingress of the tunnel. It indicates tunnel types. Options: 1. invalid(1) -indicates that the tunnel type is invalid, the possible cause is that it is not ingress node of this tunnel 2. primaryTunnel(2) -indicates that this is a primary tunnel 3. bypassTunnel(3) -indicates that this is a bypass tunnel Enumeration: 'bypassTunnel': 3, 'primaryTunnel': 2, 'invalid': 1.
             hwTunnelFrrBypassTable 1.3.6.1.4.1.2011.5.25.121.1.2 no-access
Indicates the bypass tunnel. The indexes of this table are hwTunnelFrrBypassListIndex and hwTunnelFrrBypassIndex.
                 hwTunnelFrrBypassEntry 1.3.6.1.4.1.2011.5.25.121.1.2.1 no-access
Indicates the bypass tunnel.The indexes of this entry are hwTunnelFrrBypassListIndex and hwTunnelFrrBypassIndex.
                     hwTunnelFrrBypassListIndex 1.3.6.1.4.1.2011.5.25.121.1.2.1.1 unsigned32 no-access
Indicates the index of the bypass tunnel table, that is, the LSP ID of the bypass tunnel.
                     hwTunnelFrrBypassIndex 1.3.6.1.4.1.2011.5.25.121.1.2.1.2 unsigned32 no-access
Indicates the index of the bypass tunnel interface.
                     hwTunnelFrrBypassProtIfIndex 1.3.6.1.4.1.2011.5.25.121.1.2.1.3 unsigned32 read-only
Indicates the index of the interface protected by the bypass tunnel.
             hwTunnelFrrARHopTable 1.3.6.1.4.1.2011.5.25.121.1.3 no-access
Indicates the FrrARHopTable, which will show every hop's frr protect information of the tunnel. The indexes of this table are hwTunnelFrrARHopListIndex and hwTunnelFrrARHopIndex.
                 hwTunnelFrrARHopEntry 1.3.6.1.4.1.2011.5.25.121.1.3.1 no-access
Indicates the FrrARHopTable, which will show every hop's frr protect information of the tunnel. The indexes of this entry are hwTunnelFrrARHopListIndex and hwTunnelFrrARHopIndex.
                     hwTunnelFrrARHopListIndex 1.3.6.1.4.1.2011.5.25.121.1.3.1.1 unsigned32 no-access
Indicates the table index of each hop along the primary tunnel.
                     hwTunnelFrrARHopIndex 1.3.6.1.4.1.2011.5.25.121.1.3.1.2 unsigned32 no-access
Indicates the index of each hop along the primary tunnel.
                     hwTunnelFrrARHopProtDesired 1.3.6.1.4.1.2011.5.25.121.1.3.1.3 bits read-only
Indicates the FRR protection types desired by the primary tunnel interface, including: 0: link protection, 1: node protection, 2: bandwidth protection Bits: 'bandwidthProtection': 2, 'localProtection': 0, 'nodeProtection': 1.
                     hwTunnelFrrARHopProtActual 1.3.6.1.4.1.2011.5.25.121.1.3.1.4 bits read-only
Indicates the actual FRR protection types of the primary tunnel interface, including: 0: link protection, 1: node protection, 2: bandwidth protection, 3: primary tunnel protection in use Bits: 'bandwidthProtection': 2, 'localProtection': 0, 'nodeProtection': 1, 'protectionInuse': 3.
             hwTunnelFrrRouteDBTable 1.3.6.1.4.1.2011.5.25.121.1.4 no-access
Indicates the primary tunnel is protected by which bypass tunnel. The indexes of this table are hwTunnelFrrRouteDBTunnelIndex, hwTunnelFrrRouteDBTunnelInstance, hwTunnelFrrRouteDBTunnelIngressLSRId and hwTunnelFrrRouteDBTunnelEngressLSRId.
                 hwTunnelFrrRouteDBEntry 1.3.6.1.4.1.2011.5.25.121.1.4.1 no-access
Indicates the primary tunnel is protected by which bypass tunnel. The indexes of this entry are hwTunnelFrrRouteDBTunnelIndex, hwTunnelFrrRouteDBTunnelInstance, hwTunnelFrrRouteDBTunnelIngressLSRId and hwTunnelFrrRouteDBTunnelEngressLSRId.
                     hwTunnelFrrRouteDBTunnelIndex 1.3.6.1.4.1.2011.5.25.121.1.4.1.1 unsigned32 no-access
Identifies the index of the primary. Manager obtains new index values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signaling protocol is rsvp(2), this value equals to the value signaled in the Tunnel ID of the SESSION object. When the MPLS signaling protocol is crldp(3), this value equals to the value signaled in the LSP ID. Reference to MPLS-TE-STD-MIB.
                     hwTunnelFrrRouteDBTunnelInstance 1.3.6.1.4.1.2011.5.25.121.1.4.1.2 unsigned32 no-access
Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is the object identifies multiple instances of tunnels for the purposes of backup and parallel tunnels. When the MPLS signaling protocol is rsvp(2), this value equals to the LSP ID of the Sender Template object. When the signaling protocol is crldp(3), there is no equivalent signaling object. Reference to MPLS-TE-STD-MIB.
                     hwTunnelFrrRouteDBTunnelIngressLSRId 1.3.6.1.4.1.2011.5.25.121.1.4.1.3 unsigned32 no-access
Identifies the ingress LSR ID of the primary tunnel. When the MPLS signalling protocol is rsvp(2),LSR ID equals to the Tunnel Sender Address in the Sender Template object or the Extended Tunnel Id in the SESSION object. When the MPLS signalling protocol is crldp(3), LSR ID equals to the Ingress LSR Router ID in the LSPID TLV object.
                     hwTunnelFrrRouteDBTunnelEngressLSRId 1.3.6.1.4.1.2011.5.25.121.1.4.1.4 unsigned32 no-access
Identifies the egress LSR ID of the primary tunnel. Reference to MPLS-TE-STD-MIB.
                     hwTunnelFrrRouteDBBypassIfIndex 1.3.6.1.4.1.2011.5.25.121.1.4.1.5 unsigned32 read-only
Indicates the interface index of the bypass tunnel.
                     hwTunnelFrrRouteDBInnerLabel 1.3.6.1.4.1.2011.5.25.121.1.4.1.6 unsigned32 read-only
Indicates the inner label of the primary tunnel and bypass tunnel.
             hwStaticLspTable 1.3.6.1.4.1.2011.5.25.121.1.5 no-access
A static LSP is created by a network administrator by using static MPLS. Note that only point-to-point static LSP segments are supported. Each static MPLS LSP can thus have one out-segment originating at this LSR and/or one in-segment terminating at this LSR. The indexes of this table are hwStaticLspIndex, hwStaticLspInSegmentIndex, and hwStaticLspOutSegmentIndex.
                 hwStaticLspEntry 1.3.6.1.4.1.2011.5.25.121.1.5.1 no-access
A static LSP is created by a network administrator by using static MPLS. Note that only point-to-point static LSP segments are supported. Each static MPLS LSP can thus have one out-segment originating at this LSR and/or one in-segment terminating at this LSR. The indexes of this entry are hwStaticLspIndex, hwStaticLspInSegmentIndex, and hwStaticLspOutSegmentIndex.
                     hwStaticLspIndex 1.3.6.1.4.1.2011.5.25.121.1.5.1.1 mplsindextype no-access
Indicates the index of the static LSP. If the string is 0x00, it means that the index is invalid.
                     hwStaticLspInSegmentIndex 1.3.6.1.4.1.2011.5.25.121.1.5.1.2 mplsindextype no-access
Indicates the incoming label index of the static LSP/CR-LSP. If the string is 0x00, it means that the index is invalid. In this case, no corresponding mplsInSegmentEntry exists. Reference to MPLS-LSR-STD-MIB.
                     hwStaticLspOutSegmentIndex 1.3.6.1.4.1.2011.5.25.121.1.5.1.3 mplsindextype no-access
Indicates the outgoing index of the static LSP/CR-LSP. If the entry is used to identify the incoming node or intermediate node of the LSP, this object cannot be set to the string 0x00. Because corresponding mplsOutSegmentEntry exists. If the entry is used to identify the outgoing node of the LSP, this object must be set to the string 0x00. Because no corresponding mplsOutSegmentEntry exists. Reference to MPLS-LSR-STD-MIB.
                     hwStaticLspOwner 1.3.6.1.4.1.2011.5.25.121.1.5.1.4 integer read-only
Denotes the entity that creates and manages the static LSP. See MPLS-LSR-STD-MIB. Options: 1. static(1) -indicates the static LSP. 2. crstatic(2) -indicates the static CR-LSP. 3. other(3) -indicates the LSP of another type. Enumeration: 'other': 3, 'static': 1, 'crstatic': 2.
                     hwStaticLspName 1.3.6.1.4.1.2011.5.25.121.1.5.1.5 snmpadminstring read-only
Indicates the name of the static LSP or CR-LSP. The name is appointed when the static LSP or CR-LSP is created.
                     hwStaticLspStatus 1.3.6.1.4.1.2011.5.25.121.1.5.1.6 integer read-only
Indicates the actual operation status of the static LSP/CR-LSP. Options: 1. up(1) -indicates that the static LSP/CR-LSP is in Up state. 2. down(2) -indicates that the static LSP/CR-LSP is in down state. 3. testing(3) -indicates that the static LSP/CR-LSP is used in test mode. Enumeration: 'down': 2, 'testing': 3, 'up': 1.
                     hwStaticLspClassType 1.3.6.1.4.1.2011.5.25.121.1.5.1.7 integer read-only
The Class-Type of this static lsp. Options: 1. ct0(1) -indicates that the class type is ct0. 2. ct1(2) -indicates that the class type is ct1. 3. ct2(3) -indicates that the class type is ct2. 4. ct3(4) -indicates that the class type is ct3. 5. ct4(5) -indicates that the class type is ct4. 6. ct5(6) -indicates that the class type is ct5. 7. ct6(7) -indicates that the class type is ct6. 8. ct7(8) -indicates that the class type is ct7. 9. none(9) -indicates that the class type is unconfiged. Enumeration: 'ct4': 5, 'ct5': 6, 'ct6': 7, 'ct7': 8, 'ct0': 1, 'ct1': 2, 'ct2': 3, 'ct3': 4, 'none': 9.
                     hwStaticLspBandwidth 1.3.6.1.4.1.2011.5.25.121.1.5.1.8 unsigned32 read-only
The bandwidth of this static lsp. Unit: kbit/s
             hwMplsTeClassTable 1.3.6.1.4.1.2011.5.25.121.1.6 no-access
TE-class mapping is a set of a maximum of eight TE-class items. TE-class is a pair, such as TE-Class[1] = . A (setup/holding) priority associated with an LSP valid only if it appears as a pair with the Class-Type. Class-Types and priorities can be randomly paired up. You can define a maximum of eight pairs. The LSR is considered to support a particular Class-Type only if it appears in the definition of the eight possible TE-Classes. It is suggested that all the LSRs in the domain use the same TE-Class mapping. The index of this table is hwMplsTeClassId.
                 hwMplsTeClassEntry 1.3.6.1.4.1.2011.5.25.121.1.6.1 no-access
TE-class mapping is a set of a maximum of eight TE-class items. TE-class is a pair, such as TE-Class[1] = . A (setup/holding) priority associated with an LSP valid only if it appears as a pair with the Class-Type. Class-Types and priorities can be randomly paired up. You can define a maximum of eight pairs. The LSR is considered to support a particular Class-Type only if it appears in the definition of the eight possible TE-Classes. It is suggested that all the LSRs in the domain use the same TE-Class mapping. The index of this entry is hwMplsTeClassId.
                     hwMplsTeClassId 1.3.6.1.4.1.2011.5.25.121.1.6.1.1 unsigned32 no-access
This value represents the index of the TE-Class configured on this LSR.
                     hwMplsTeClassClassType 1.3.6.1.4.1.2011.5.25.121.1.6.1.2 integer read-only
This value represents a Class-Type supported on the LSR. Options: 1. ct0(1) -indicates that the class type of static CR-LSP is ct0. 2. ct1(2) -indicates that the class type of static CR-LSP is ct1. 3. ct2(3) -indicates that the class type of static CR-LSP is ct2. 4. ct3(4) -indicates that the class type of static CR-LSP is ct3. 5. ct4(5) -indicates that the class type of static CR-LSP is ct4. 6. ct5(6) -indicates that the class type of static CR-LSP is ct5. 7. ct6(7) -indicates that the class type of static CR-LSP is ct6. 8. ct7(8) -indicates that the class type of static CR-LSP is ct7. Enumeration: 'ct4': 5, 'ct5': 6, 'ct6': 7, 'ct7': 8, 'ct0': 1, 'ct1': 2, 'ct2': 3, 'ct3': 4.
                     hwMplsTeClassPriority 1.3.6.1.4.1.2011.5.25.121.1.6.1.3 unsigned32 read-only
This value represents the preemption priority (setup or holding) supported for a particular class-type, on the LSR. Range: 0-7 Default: 7
                     hwMplsTeClassDescription 1.3.6.1.4.1.2011.5.25.121.1.6.1.4 octet string read-only
Textual description of the TE-Class defined by this row.
             hwMplsIfBcTable 1.3.6.1.4.1.2011.5.25.121.1.7 no-access
This table describes bandwidth constraints associated with MPLS TE enabled interfaces. The index of this table is ifIndex.
                 hwMplsIfBcEntry 1.3.6.1.4.1.2011.5.25.121.1.7.1 no-access
This table describes bandwidth constraints associated with MPLS TE enabled interfaces. The index of this entry is ifIndex.
                     hwMplsIfMaxResvBandwidth 1.3.6.1.4.1.2011.5.25.121.1.7.1.1 unsigned32 read-only
The maximum reservable bandwidth on this interface. Unit: kbit/s
                     hwMplsIfBc0Bandwidth 1.3.6.1.4.1.2011.5.25.121.1.7.1.2 unsigned32 read-only
The bandwidth of Class-Type 0 (CT0) in this tunnel. Unit: kbit/s
                     hwMplsIfBc1Bandwidth 1.3.6.1.4.1.2011.5.25.121.1.7.1.3 unsigned32 read-only
The bandwidth of Class-Type 1 (CT1) in this tunnel. Unit: kbit/s
                     hwMplsIfBc2Bandwidth 1.3.6.1.4.1.2011.5.25.121.1.7.1.4 unsigned32 read-only
The bandwidth of Class-Type 2 (CT2) in this tunnel. Unit: kbit/s
                     hwMplsIfBc3Bandwidth 1.3.6.1.4.1.2011.5.25.121.1.7.1.5 unsigned32 read-only
The bandwidth of Class-Type 3 (CT3) in this tunnel. Unit: kbit/s
                     hwMplsIfBc4Bandwidth 1.3.6.1.4.1.2011.5.25.121.1.7.1.6 unsigned32 read-only
The bandwidth of Class-Type 4 (CT4) in this tunnel. Unit: kbit/s
                     hwMplsIfBc5Bandwidth 1.3.6.1.4.1.2011.5.25.121.1.7.1.7 unsigned32 read-only
The bandwidth of Class-Type 5 (CT5) in this tunnel. Unit: kbit/s
                     hwMplsIfBc6Bandwidth 1.3.6.1.4.1.2011.5.25.121.1.7.1.8 unsigned32 read-only
The bandwidth of Class-Type 6 (CT6) in this tunnel. Unit: kbit/s
                     hwMplsIfBc7Bandwidth 1.3.6.1.4.1.2011.5.25.121.1.7.1.9 unsigned32 read-only
The bandwidth of Class-Type 7 (CT7) in this tunnel. Unit: kbit/s
             hwStaticLspTnlTable 1.3.6.1.4.1.2011.5.25.121.1.8 no-access
hwStaticLspTnlTable is used to display static LSP token of a static LSP of a specified name. The index of this table is hwStaticLspTnlName.
                 hwStaticLspTnlEntry 1.3.6.1.4.1.2011.5.25.121.1.8.1 no-access
hwStaticLspTnlTable is used to display static LSP token of a static LSP of a specified name. The index of this entry is hwStaticLspTnlName.
                     hwStaticLspTnlName 1.3.6.1.4.1.2011.5.25.121.1.8.1.1 snmpadminstring no-access
Indicates the name of the Static Lsp.
                     hwStaticLspTnlToken 1.3.6.1.4.1.2011.5.25.121.1.8.1.2 unsigned32 read-only
Indicates the token of the Static Lsp.
             hwMplsTeVpnQosTable 1.3.6.1.4.1.2011.5.25.121.1.9 no-access
This table is used to display VPN QoS information of a specified TE Tunnel according to TunnelID. The index of this table is hwMplsTnlID.
                 hwMplsTeVpnQosEntry 1.3.6.1.4.1.2011.5.25.121.1.9.1 no-access
This table is used to display VPN QoS information of a specified TE Tunnel according to TunnelID. The index of this entry is hwMplsTnlID.
                     hwMplsTnlID 1.3.6.1.4.1.2011.5.25.121.1.9.1.1 unsigned32 no-access
The value of this object identifies the TE tunnel ID.
                     hwMplsTeVpnMaxBandwidth 1.3.6.1.4.1.2011.5.25.121.1.9.1.2 unsigned32 read-only
The value of this object identifies the bandwidth the TE tunnel can provide for VPN QoS. Unit: kbit/s
                     hwMplsTeVpnAllocatedBandwidth 1.3.6.1.4.1.2011.5.25.121.1.9.1.3 unsigned32 read-only
The value of this object identifies the bandwidth used by VPN QoS, in Kbps. Unit: kbit/s
             hwStaticLspInIfIndex 1.3.6.1.4.1.2011.5.25.121.1.11 octet string no-access
Indicates the inbound interface index of a static LSP/CR-LSP.
             hwStaticLspInIfName 1.3.6.1.4.1.2011.5.25.121.1.12 octet string no-access
Indicates the name of an inbound interface of a static LSP/CR-LSP.
             hwStaticLspDownReason 1.3.6.1.4.1.2011.5.25.121.1.13 integer32 no-access
Indicates the reason for static LSP/CR-LSP Down: 0. Other 1. Static LSP/CR-LSP up 2. MPLS disabled on an interface 3. MPLS TE disabled on an interface 4. Route change 5. Tunnel binding associated with the static LSP/CR-LSP deleted 6. Static LSP/CR-LSP configuration delete 7. Inbound interface Down 8. Outbound interface Down 9. Tunnel associated with the static LSP/CR-LSP has been shut down 10. Static LSP/CR-LSP configuration update 11. The bound ring is invalid.
             hwMplsTunnelStatisticsTable 1.3.6.1.4.1.2011.5.25.121.1.14 no-access
A tunnel needs to be uniquely identified across an MPLS network. hwMplsTunnelStatisticsTunnelIndex uniquely identifies a tunnel on the LSR originating the tunnel. hwMplsTunnelStatisticsIngressLSRId uniquely identifies a tunnel across an MPLS network. The last index hwMplsTunnelStatisticsEgressLSRId is useful in identifying all instances of a tunnel that are terminated on the same egress LSR. The indexes of this table are hwMplsTunnelStatisticsTunnelIndex, hwMplsTunnelStatisticsIngressLSRId and hwMplsTunnelStatisticsEgressLSRId.
                   hwMplsTunnelStatisticsEntry 1.3.6.1.4.1.2011.5.25.121.1.14.1 no-access
A tunnel needs to be uniquely identified across an MPLS network. hwMplsTunnelStatisticsTunnelIndex uniquely identifies a tunnel on the LSR originating the tunnel. hwMplsTunnelStatisticsIngressLSRId uniquely identifies a tunnel across an MPLS network. The last index hwMplsTunnelStatisticsEgressLSRId is useful in identifying all instances of a tunnel that are terminated on the same egress LSR. The indexes of this table are hwMplsTunnelStatisticsTunnelIndex, hwMplsTunnelStatisticsIngressLSRId and hwMplsTunnelStatisticsEgressLSRId.
                       hwMplsTunnelStatisticsTunnelIndex 1.3.6.1.4.1.2011.5.25.121.1.14.1.1 unsigned32 no-access
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. When the MPLS signalling protocol is rsvp(2), this value equals to the value signaled in the Tunnel ID of the SESSION object. When the MPLS signalling protocol is crldp(3), this value equals to the value signaled in the LSP ID. Reference to MPLS-TE-STD-MIB.
                       hwMplsTunnelStatisticsIngressLSRId 1.3.6.1.4.1.2011.5.25.121.1.14.1.2 ipaddress no-access
Indicates the ingress LSR ID of this tunnel. When the MPLS signalling protocol is rsvp(2), this value equals to the Tunnel Sender Address in the Sender Template object and may equal to the Extended Tunnel ID in the SESSION object. When the MPLS signalling protocol is crldp(3), this value equals to the Ingress LSR Router ID in the LSPID TLV object. Reference to MPLS-TE-STD-MIB.
                       hwMplsTunnelStatisticsEgressLSRId 1.3.6.1.4.1.2011.5.25.121.1.14.1.3 ipaddress no-access
Indicates the egress LSR ID of this tunnel. Reference to MPLS-TE-STD-MIB.
                       hwMplsTunnelStatisticsHCInOctets 1.3.6.1.4.1.2011.5.25.121.1.14.1.4 counter64 read-only
The total number of octets received on the interface, including framing characters.
                       hwMplsTunnelStatisticsHCOutOctets 1.3.6.1.4.1.2011.5.25.121.1.14.1.5 counter64 read-only
The total number of octets transmitted out of the interface, including framing characters.
         hwMplsExtendTrap 1.3.6.1.4.1.2011.5.25.121.2
             hwLspTrap 1.3.6.1.4.1.2011.5.25.121.2.1
                 hwMplsStaticLspUp 1.3.6.1.4.1.2011.5.25.121.2.1.1
This notification indicates that the status of referred static LSP changes to Up.
                 hwMplsStaticLspDown 1.3.6.1.4.1.2011.5.25.121.2.1.2
This notification indicates that the status of referred static LSP changes to Down.
                 hwMplsStaticCRLspUp 1.3.6.1.4.1.2011.5.25.121.2.1.3
This notification indicates that the status of referred static CR-LSP changes to Up.
                 hwMplsStaticCRLspDown 1.3.6.1.4.1.2011.5.25.121.2.1.4
This notification indicates that the status of referred static CR-LSP changes to Down.
                 hwMplsTeFrrProtAval 1.3.6.1.4.1.2011.5.25.121.2.1.5
This notification indicates that the primary tunnel is bound to bypass tunnel.
                 hwMplsTeFrrProtNotAval 1.3.6.1.4.1.2011.5.25.121.2.1.6
This notification indicates that the primary tunnel is unbound to bypass tunnel.
                 hwMplsTeFrrSwitch 1.3.6.1.4.1.2011.5.25.121.2.1.7
This notification indicates that the primary tunnel is switches to the bypass tunnel.
                 hwMplsTeFrrResume 1.3.6.1.4.1.2011.5.25.121.2.1.8
This notification indicates that the primary tunnel is switched back from the bypass tunnel.
                 hwMplsTunnelHSBSwitch 1.3.6.1.4.1.2011.5.25.121.2.1.9
This notification indicates that the data is switched from the primary CR-LSP to the HSB CR-LSP.
                 hwMplsTunnelHSBResume 1.3.6.1.4.1.2011.5.25.121.2.1.10
This notification indicates that the data is switched from the HSB CR-LSP to the primary CR-LSP.
                 hwMplsTunnelOBSwitch 1.3.6.1.4.1.2011.5.25.121.2.1.11
This notification indicates that the primary CR-LSP is down and the Ordinary backup CR-LSP is up.
                 hwMplsTunnelOBResume 1.3.6.1.4.1.2011.5.25.121.2.1.12
This notification indicates that the data is switched from the Ordinary backup CR-LSP to the primary CR-LSP.
                 hwMplsTunnelUp 1.3.6.1.4.1.2011.5.25.121.2.1.13
The hwMplsTunnelUp trap indicates that the staus of the tunnel changes into Up.
                 hwMplsTunnelDown 1.3.6.1.4.1.2011.5.25.121.2.1.14
The hwMplsTunnelDown trap indicates that the staus of the tunnel changes into Down.
                 hwMplsTunnelChangeBw 1.3.6.1.4.1.2011.5.25.121.2.1.15
This notification indicates that the bandwidth of the tunnel is changed.
                 hwMplsTunnelTpOamLossSD 1.3.6.1.4.1.2011.5.25.121.2.1.16
This object indicates that the loss ratio of the packets carried by the tunnel exceeded the first threshold.
                 hwMplsOamSDRecovery 1.3.6.1.4.1.2011.5.25.121.2.1.17
This object indicates that the loss ratio of the packets carried by the tunnel dropped below the first threshold.
                 hwMplsOamLoss 1.3.6.1.4.1.2011.5.25.121.2.1.18
This object indicates that TP OAM detected tunnel connectivity faults.
                 hwMplsOamLossRecovery 1.3.6.1.4.1.2011.5.25.121.2.1.19
This object indicates that TP OAM did not detect tunnel connectivity faults.
                 hwMplsOamAis 1.3.6.1.4.1.2011.5.25.121.2.1.20
This object indicates that TP OAM detected an alarm indication signal.
                 hwMplsOamAisRecovery 1.3.6.1.4.1.2011.5.25.121.2.1.21
This object indicates that TP OAM no longer detected alarm indication signals.
                 hwMplsOamRdi 1.3.6.1.4.1.2011.5.25.121.2.1.22
This object indicates that TP OAM detected remote defects.
                 hwMplsOamRdiRecovery 1.3.6.1.4.1.2011.5.25.121.2.1.23
This object indicates that the remote defects detected by TP OAM were removed.
                 hwMplsOamMeg 1.3.6.1.4.1.2011.5.25.121.2.1.24
This object indicates that the names configured on the two ends of the tunnel are inconsistent.
                 hwMplsOamMegRecovery 1.3.6.1.4.1.2011.5.25.121.2.1.25
This object indicates that the names configured on the two ends of the tunnel now are consistent.
                 hwMplsOamMep 1.3.6.1.4.1.2011.5.25.121.2.1.26
This object indicates that the MEP-IDs configured on the two ends of the tunnel are inconsistent.
                 hwMplsOamMepRecovery 1.3.6.1.4.1.2011.5.25.121.2.1.27
This object indicates that the MEP-IDs configured on the two ends of the tunnel now are consistent.
                 hwMplsOamSF 1.3.6.1.4.1.2011.5.25.121.2.1.28
This object indicates that the loss ratio of the packets carried by the tunnel exceeded the second threshold in the local link.
                 hwMplsOamSFRecovery 1.3.6.1.4.1.2011.5.25.121.2.1.29
This object indicates that the loss ratio of the packets carried by the tunnel dropped below the second threshold in the local link.
                 hwMplsOamPeriod 1.3.6.1.4.1.2011.5.25.121.2.1.30
This object indicates that the TP OAM detection periods on the two ends of the tunnel are inconsistent.
                 hwMplsOamPeriodRecovery 1.3.6.1.4.1.2011.5.25.121.2.1.31
This object indicates that the TP OAM detection periods on the two ends of the tunnel now are consistent.
                 hwMplsOamLck 1.3.6.1.4.1.2011.5.25.121.2.1.32
This object indicates that TP OAM detected the service level of the tunnel has been locked.
                 hwMplsOamLckRecovery 1.3.6.1.4.1.2011.5.25.121.2.1.33
This object indicates that TP OAM detected the service level of the tunnel has not been locked.
                 hwMplsOamExcess 1.3.6.1.4.1.2011.5.25.121.2.1.34
This object indicates that MPLS OAM detected the tunnel received excess alarm.
                 hwMplsOamExcessRecovery 1.3.6.1.4.1.2011.5.25.121.2.1.35
This object indicates that MPLS OAM detected the tunnel received excess alarm end.
                 hwMplsOamMisMatch 1.3.6.1.4.1.2011.5.25.121.2.1.36
This object indicates that MPLS OAM detected the tunnel received MisMatch alarm.
                 hwMplsOamMisMatchRecovery 1.3.6.1.4.1.2011.5.25.121.2.1.37
This object indicates that MPLS OAM detected the tunnel received MisMatch alarm end.
                 hwMplsOamMisMerge 1.3.6.1.4.1.2011.5.25.121.2.1.38
This object indicates that MPLS OAM detected the tunnel received MisMerge alarm.
                 hwMplsOamMisMergeRecovery 1.3.6.1.4.1.2011.5.25.121.2.1.39
This object indicates that MPLS OAM detected the tunnel received MisMerge alarm end.
                 hwMplsOamUnknown 1.3.6.1.4.1.2011.5.25.121.2.1.40
This object indicates that MPLS OAM detected the tunnel received Unknown alarm.
                 hwMplsOamUnknownRecovery 1.3.6.1.4.1.2011.5.25.121.2.1.41
This object indicates that MPLS OAM detected the tunnel received Unknown alarm end.
                 hwMplsOamBDI 1.3.6.1.4.1.2011.5.25.121.2.1.42
This object indicates that MPLS OAM detected the tunnel received BDI alarm.
                 hwMplsOamBDIRecovery 1.3.6.1.4.1.2011.5.25.121.2.1.43
This object indicates that MPLS OAM detected the tunnel received BDI alarm end.
                 hwMplsOamFail 1.3.6.1.4.1.2011.5.25.121.2.1.44
This object indicates that MPLS OAM detected the tunnel received OAMFAIL alarm.
                 hwMplsOamFailRecovery 1.3.6.1.4.1.2011.5.25.121.2.1.45
This object indicates that MPLS OAM detected the tunnel received OAMFAIL alarm end.
                 hwMplsTunnelPrimaryUp 1.3.6.1.4.1.2011.5.25.121.2.1.46
This notification indicates that the status of the RSVP-TE Primary LSP changes to Up.
                 hwMplsTunnelPrimaryDown 1.3.6.1.4.1.2011.5.25.121.2.1.47
This notification indicates that the status of the RSVP-TE Primary LSP changes to Down.
                 hwMplsTunnelHotstandbyUp 1.3.6.1.4.1.2011.5.25.121.2.1.48
This notification indicates that the status of the RSVP-TE Hot-standby LSP changes to Up.
                 hwMplsTunnelHotstandbyDown 1.3.6.1.4.1.2011.5.25.121.2.1.49
This notification indicates that the status of the RSVP-TE Hot-standby LSP changes to Down.
                 hwMplsTunnelOrdinaryUp 1.3.6.1.4.1.2011.5.25.121.2.1.50
This notification indicates that the status of the RSVP-TE Ordinary LSP changes to Up.
                 hwMplsTunnelOrdinaryDown 1.3.6.1.4.1.2011.5.25.121.2.1.51
This notification indicates that the status of the RSVP-TE Ordinary LSP changes to Down.
                 hwMplsTunnelBesteffortUp 1.3.6.1.4.1.2011.5.25.121.2.1.52
This notification indicates that the status of the RSVP-TE Best-effort LSP changes to Up.
                 hwMplsTunnelBesteffortDown 1.3.6.1.4.1.2011.5.25.121.2.1.53
This notification indicates that the status of the RSVP-TE Best-effort LSP changes to Down.
                 hwMplsTeAutoTunnelDownClear 1.3.6.1.4.1.2011.5.25.121.2.1.54
This notification indicates that the TE Auto tunnel Down alarm was cleared.
                 hwMplsTeAutoTunnelPrimaryDownClear 1.3.6.1.4.1.2011.5.25.121.2.1.55
This notification indicates that the Down alarm about the primary LSP in the TE Auto tunnel was cleared.
                 hwMplsTunnelBBSwitch 1.3.6.1.4.1.2011.5.25.121.2.1.56
This notification indicates that the primary CR-LSP is Down and the Best-effort backup CR-LSP is Up.
                 hwMplsTunnelBBResume 1.3.6.1.4.1.2011.5.25.121.2.1.57
This notification indicates that data is switched from the Best-effort backup CR-LSP to the primary CR-LSP.
                 hwMplsExtTunnelDown 1.3.6.1.4.1.2011.5.25.121.2.1.58
This notification indicates that the status of te tunnel changes to Down.
                 hwMplsExtTunnelDownClear 1.3.6.1.4.1.2011.5.25.121.2.1.59
This notification indicates that the down alarm of te tunnel was cleared.
                 hwMplsOamLocalLock 1.3.6.1.4.1.2011.5.25.121.2.1.60
This object indicates that TP OAM detected the tunnel has been locked.
                 hwMplsOamLocalLockRecovery 1.3.6.1.4.1.2011.5.25.121.2.1.61
This object indicates that TP OAM detected the tunnel has not been locked.
                 hwMplsTunnelDelete 1.3.6.1.4.1.2011.5.25.121.2.1.62
This notification indicates that the mpls te tunnel was deleted.
                 hwMplsLspThresholdExceed 1.3.6.1.4.1.2011.5.25.121.2.1.63
This object indicates that lsp count has exceeded the threshold.
                 hwMplsLspThresholdExceedClear 1.3.6.1.4.1.2011.5.25.121.2.1.64
This object indicates that lsp count has resumed from exceeding the threshold.
                 hwMplsLspTotalCountExceed 1.3.6.1.4.1.2011.5.25.121.2.1.65
This object indicates that lsp count has reached the total count.
                 hwMplsLspTotalCountExceedClear 1.3.6.1.4.1.2011.5.25.121.2.1.66
This object indicates that lsp count has resumed from reaching the total count.
                 hwMplsDynamicLabelThresholdExceed 1.3.6.1.4.1.2011.5.25.121.2.1.67
This object indicates that label usage has exceeded the threshold.
                 hwMplsDynamicLabelThresholdExceedClear 1.3.6.1.4.1.2011.5.25.121.2.1.68
This object indicates that label usage has resumed from exceeding the threshold.
                 hwMplsDynamicLabelTotalCountExceed 1.3.6.1.4.1.2011.5.25.121.2.1.69
This object indicates that label count has reached the total count.
                 hwMplsDynamicLabelTotalCountExceedClear 1.3.6.1.4.1.2011.5.25.121.2.1.70
This object indicates that label usage count has resumed from reaching the total count.
                 hwMplsResourceThresholdExceed 1.3.6.1.4.1.2011.5.25.121.2.1.71
This object indicates that the number of MPLS resources has exceeded the upper threshold.
                 hwMplsResourceThresholdExceedClear 1.3.6.1.4.1.2011.5.25.121.2.1.72
This object indicates that the number of MPLS resources has fallen below the lower threshold.
                 hwMplsResourceTotalCountExceed 1.3.6.1.4.1.2011.5.25.121.2.1.73
This object indicates that the number of MPLS resources has reached the maximum number.
                 hwMplsResourceTotalCountExceedClear 1.3.6.1.4.1.2011.5.25.121.2.1.74
This object indicates that the number of MPLS resources fallen below the recovery number.
                 hwMplsLspLoopBack 1.3.6.1.4.1.2011.5.25.121.2.1.75
This object indicates that the lsp was looped back.
                 hwMplsLspLoopBackClear 1.3.6.1.4.1.2011.5.25.121.2.1.76
This object indicates that loopback of the LSP is restored.
                 hwMplsTunnelCommitLost 1.3.6.1.4.1.2011.5.25.121.2.1.77
This object indicates that, after the device saves MPLS TE tunnel configurations, the device commits only some MPLS tunnel configurations.
                 hwMplsTunnelCommitLostClear 1.3.6.1.4.1.2011.5.25.121.2.1.78
This object indicates that, after the device saves MPLS TE tunnel configurations, the device commits all MPLS tunnel configurations.
                 hwMplsTunnelHotstandbySwitch 1.3.6.1.4.1.2011.5.25.121.2.1.79
This notification indicates that the data is switched from the primary CR-LSP to the HSB CR-LSP.
                 hwMplsTunnelHotstandbyResume 1.3.6.1.4.1.2011.5.25.121.2.1.80
This notification indicates that the data is switched from the HSB CR-LSP to the primary CR-LSP.
             hwMplsTrapObjects 1.3.6.1.4.1.2011.5.25.121.2.2
                 hwMplsTunnelIfName 1.3.6.1.4.1.2011.5.25.121.2.2.1 snmpadminstring no-access
The Tunnel Interface name.
                 hwMplsTunnelFrrConfigOper 1.3.6.1.4.1.2011.5.25.121.2.2.2 integer no-access
The value of this object identifies the operation that an FRR configuration is committed on the tunnel. Options: 1.unconfig(0) -indicates the configuration of the undo mpls te fast-reroute command is committed. 2.config(1) -indicates the configuration of the mpls te fast-reroute command is committed. 3.unknow(2) -indicates an unknown operation. Enumeration: 'unconfig': 0, 'config': 1, 'unknow': 2.
                 hwMplsTunnelDownReason 1.3.6.1.4.1.2011.5.25.121.2.2.3 integer no-access
Indicates the alarm reason as below: 1. Other; 2. Static LSP down; 3. Static CR-LSP down; 4. The out interface of the RSVP LSP ingress is down; 5. The resource of RSVP LSP is preempted; 6. RSVP message timeout; 7. RSVP neighbor lost; 8. The bypass-tunnel is down or is unbinded with main tunnel, as bypass-tunnel is in used; 9. CSPF compute fail; 10.User shutdown the tunnel; 11.TPOAM indicates the connectivity fault of the link; 12.TPOAM indicates receive alarm indication signal defect of the link; 13.TPOAM indicates the remote defect of the link; 14.TPOAM indicates receive unexpected MEG-ID defect of the link; 15.TPOAM indicates receive unexpected MEP-ID defect of the link; 16.TPOAM indicates packet lost exceed signal fault threshold in the local link; 17.TPOAM indicates packet unexpected period defect of the link; 18.MPLS OAM connectivity fault; 19.MPLS OAM TTSI excess; 20.MPLS OAM TTSI mismatch; 21.MPLS OAM TTSI merge error; 22.MPLS OAM unknown error; 23.MPLS OAM BDI; 24.MPLS OAM FDI; 25.MPLS OAM signal fail; 26.MPLS OAM signal degrade; 27.MPLS OAM fail; 28.Service resume; 29.Service delete; 100. Clear. Enumeration: 'mplsOamSF': 25, 'mplsOamFdi': 24, 'tpoamRemoteDefectIndication': 13, 'tpoamUnexpectedMEG': 14, 'staticCrlspDown': 3, 'tpoamPeriod': 17, 'tpoamUnexpectedMEP': 15, 'mplsOamSD': 26, 'userShutdown': 10, 'tpoamLossOfContinuity': 11, 'rsvpMessageTimeout': 6, 'serviceDelete': 29, 'mplsOamDOamFail': 27, 'mplsOamMisMatch': 20, 'other': 1, 'mplsOamBdi': 23, 'tpoamAlarmIndicationSignal': 12, 'resourcePreempted': 5, 'rsvpNeighborLost': 7, 'outIfDown': 4, 'cspfComputeFail': 9, 'serviceResume': 28, 'tpoamLossSF': 16, 'mplsOamMisMerge': 21, 'bypassTunnelDownOrUnbinded': 8, 'staticLspDown': 2, 'mplsOamUnknown': 22, 'mplsOamExcess': 19, 'mplsOamLocv': 18, 'clear': 100.
                 hwMplsLspProtocol 1.3.6.1.4.1.2011.5.25.121.2.2.4 integer no-access
The value of this object identifies the protocol of the lsp which exceeds the threshold or total count. Options: 1.ldp(1) -indicates the lsp is ldp lsp. 2.bgp(2) -indicates the lsp is bgp lsp. 3.bgpv6(3) -indicates the lsp is bgpv6 lsp. 4.ldpfrr(4) -indicates the lsp is ldp frr lsp. 5.rsvp(5) -indicates the lsp is rsvp te lsp. 6.totalLsp(6) -indicates the lsp is total lsp. 7.totalCrLsp(7) -indicates the lsp is total cr-lsp. 8.ldpIngress(8) -indicates the lsp is ldp ingress lsp. 9.ldpTransit(9) -indicates the lsp is ldp transit lsp. 10.ldpEgress(10) -indicates the lsp is ldp egress lsp. 11.bgpIngress(11) -indicates the lsp is bgp ingress lsp. 12.bgpEgress(12) -indicates the lsp is bgp egress lsp. 13.bgpv6Ingress(13) -indicates the lsp is bgpv6 ingress lsp. 14.bgpv6Egress(14) -indicates the lsp is bgpv6 egress lsp. 15.rsvpIngress(15) -indicates the lsp is rsvp te ingress lsp. 16.rsvpTransit(16) -indicates the lsp is rsvp te transit lsp. 17.rsvpEgress(17) -indicates the lsp is rsvp te egress lsp. 18.totalLspIngress(18) -indicates the lsp is total ingress lsp. 19.totalLspTransit(19) -indicates the lsp is total transit lsp. 20.totalLspEgress(20) -indicates the lsp is total egress lsp. 21.totalCrLspIngress(21) -indicates the lsp is total ingress cr-lsp. 22.totalCrLspTransit(22) -indicates the lsp is total transit cr-lsp. 23.totalCrLspEgress(23) -indicates the lsp is total egress cr-lsp. 24.totalPublicNetLspIngressTransit(24) -indicates the lsp is total ingress and transit public netwrok lsp. 25.totalPublicNetLspTransitEgress(25) -indicates the lsp is total transit and egress public network cr-lsp. 26.privateNetBgp(26) -indicates the lsp is private network bgp lsp. 27.unknown(100) -indicates the lsp type is unknown. Enumeration: 'bgpv6Ingress': 13, 'rsvpIngress': 15, 'totalLspIngress': 18, 'ldp': 1, 'totalCrLspTransit': 22, 'ldpTransit': 9, 'rsvpEgress': 17, 'bgpv6Egress': 14, 'bgpIngress': 11, 'totalPublicNetLspTransitEgress': 25, 'bgp': 2, 'ldpfrr': 4, 'totalLspTransit': 19, 'unknown': 100, 'totalPublicNetLspIngressTransit': 24, 'totalLsp': 6, 'rsvpTransit': 16, 'totalCrLspIngress': 21, 'rsvp': 5, 'privateNetBgp': 26, 'totalCrLsp': 7, 'bgpEgress': 12, 'ldpEgress': 10, 'totalLspEgress': 20, 'bgpv6': 3, 'totalCrLspEgress': 23, 'ldpIngress': 8.
                 hwMplsLspThreshold 1.3.6.1.4.1.2011.5.25.121.2.2.5 integer32 no-access
The value of this object identifies the threshold of the lsp.
                 hwMplsLspTotalCount 1.3.6.1.4.1.2011.5.25.121.2.2.6 integer32 no-access
The value of this object identifies the total permit count of lsp.
                 hwMplsLspCurrentCount 1.3.6.1.4.1.2011.5.25.121.2.2.7 integer32 no-access
The value of this object identifies the current count of the lsp.
                 hwMplsTunnelDownLSRID 1.3.6.1.4.1.2011.5.25.121.2.2.8 mplslsridentifier no-access
The value of this object identifies the LSR ID of the error node on a tunnel.
                 hwMplsTunnelDownIfIpAddr 1.3.6.1.4.1.2011.5.25.121.2.2.9 inetaddress no-access
The value of this object identifies the IP address of the error interface on a tunnel.
                 hwMplsTunnelDownIfIpAddrType 1.3.6.1.4.1.2011.5.25.121.2.2.10 inetaddresstype no-access
The value of this object identifies the IP address type of the error interface on a tunnel.
                 hwMplsResourceType 1.3.6.1.4.1.2011.5.25.121.2.2.11 integer no-access
The value of this object identifies that the number of MPLS resources has exceeded the threshold or the maximum number. Options: 1.autoBypassTunnelIf(1) -Indicates that the resource is auto bypass tunnel interface. 2.p2mpAutoTunnelIf(2) -Indicates that the resource is P2MP auto tunnel interface. 3.teBfd(3) -Indicates that the resource is dynamic BFD for TE LSP. 4.ldpBfd(4) -Indicates that the resource is dynamic BFD for LDP LSP. 5.mldpTotalTree(5) -Indicates that the resource is the total number of MLDP trees. 6.mldpTotalBranch(6) -Indicates that the resource is the total number of MLDP branches. 7.ldpTotalRemoteAdjacency(7) -Indicates that the resource is LDP total remote adjacency. 8.outSegment(8) -Indicates that the resource is LDP outSegment. 9.autoPrimaryTunnelIf(9) -Indicates that the resource is auto primary tunnel interface. 10.ldpTotalLocalAdjacency(10) -Indicates that the resource is LDP total local adjacency. 11.cspfNode(11) -Indicates that the resource is cspf node. 12.cspfLink(12) -Indicates that the resource is cspf link. 13.cspfNlsa(13) -Indicates that the resource is cspf nlsa. 14.cspfSrlg(14) -Indicates that the resource is cspf srlg. 15.unknown(100) -Indicates that the resource type is unknown. Enumeration: 'cspfNlsa': 13, 'ldpTotalLocalAdjacency': 10, 'cspfLink': 12, 'ldpTotalRemoteAdjacency': 7, 'mldpTotalBranch': 6, 'unknown': 100, 'mldpTotalTree': 5, 'autoBypassTunnelIf': 1, 'ldpBfd': 4, 'outSegment': 8, 'teBfd': 3, 'p2mpAutoTunnelIf': 2, 'cspfNode': 11, 'cspfSrlg': 14, 'autoPrimaryTunnelIf': 9.
                 hwMplsResourceCurrentCount 1.3.6.1.4.1.2011.5.25.121.2.2.12 integer32 no-access
The value of this object identifies the number of the resources.
                 hwMplsResourceThreshold 1.3.6.1.4.1.2011.5.25.121.2.2.13 integer32 no-access
The value of this object identifies the threshold for the number of the resources.
                 hwMplsResourceTotalCount 1.3.6.1.4.1.2011.5.25.121.2.2.14 integer32 no-access
The value of this object identifies the maximum number of allowed resources.
                 hwMplsSessionTunnelId 1.3.6.1.4.1.2011.5.25.121.2.2.15 integer32 no-access
The value of this object identifies the Tunnel ID.
                 hwMplsLocalLspId 1.3.6.1.4.1.2011.5.25.121.2.2.16 integer32 no-access
The value of this object identifies the LSP ID.
                 hwMplsIngressLsrId 1.3.6.1.4.1.2011.5.25.121.2.2.17 mplslsridentifier no-access
The value of this object identifies the ingress LSR ID.
                 hwMplsEgressLsrId 1.3.6.1.4.1.2011.5.25.121.2.2.18 mplslsridentifier no-access
The value of this object identifies the egress LSR ID.
                 hwMplsLspName 1.3.6.1.4.1.2011.5.25.121.2.2.19 snmpadminstring no-access
This object indicates the name of an bidirectional static CR-LSP.
             hwMplsTunnelFrrConfigChange 1.3.6.1.4.1.2011.5.25.121.2.3
When the trap indicating that TE-Frr configuration of Tunnel is changed is sent, the cause for the change of TE-FRR configuration of Tunnel is displayed.
         hwMplsGlobalObject 1.3.6.1.4.1.2011.5.25.121.3
             hwMplsGlobalWorkMode 1.3.6.1.4.1.2011.5.25.121.3.1 integer read-only
The work mode of DS-TE system, default mode is nonstandard. Options: 1. standard(1) -indicates work mode of DS-TE system is standard 2. nonstandard(2) -indicates work mode of DS-TE system is nonstandard Enumeration: 'nonstandard': 2, 'standard': 1.
             hwMplsGlobalBcModel 1.3.6.1.4.1.2011.5.25.121.3.2 integer read-only
Bandwidth Constraint Model currently used by this LSR. Options: 1. rdm(1) -indicates that the bandwidth constraint model is RDM. 2. mam(2) -indicates that the bandwidth constraint model is MAM. 3. extendMam(3) -indicates that the bandwidth constraint model is ExtendMam. Enumeration: 'rdm': 1, 'mam': 2, 'extendMam': 3.
             hwMplsDynamicLabelTotalCount 1.3.6.1.4.1.2011.5.25.121.3.3 unsigned32 read-only
The value of this object identifies the total permit count of dynamic label.
             hwMplsDynamicLabelCurrentCount 1.3.6.1.4.1.2011.5.25.121.3.4 unsigned32 read-only
The value of this object identifies the current count of the dynamic label.
             hwMplsDynamicLabelThresholdUpperLimit 1.3.6.1.4.1.2011.5.25.121.3.5 unsigned32 read-only
The upper limit threshold value (%) of dynamic label, default value is 80.
             hwMplsDynamicLabelThresholdLowerLimit 1.3.6.1.4.1.2011.5.25.121.3.6 unsigned32 read-only
The lower limit threshold value (%) of dynamic label, default value is 70.
         hwMplsLspStatistics 1.3.6.1.4.1.2011.5.25.121.4
             hwMplsLspStatisticsTable 1.3.6.1.4.1.2011.5.25.121.4.1 no-access
hwMplsLspStatisticsTable is used to display the number of ingress LSPs, transit LSPs, or egress LSPs of specified types. The index of this table is hwMplsLspStatisticsLspType.
                 hwMplsLspStatisticsEntry 1.3.6.1.4.1.2011.5.25.121.4.1.1 no-access
hwMplsLspStatisticsTable is used to display the number of ingress LSPs, transit LSPs, or egress LSPs of specified types. The index of this entry is hwMplsLspStatisticsLspType.
                     hwMplsLspStatisticsLspType 1.3.6.1.4.1.2011.5.25.121.4.1.1.1 integer no-access
This object indicates the LSP type. Options: 1. staticLsp(1) -indicates the static LSP. 2. staticCrLsp(2) -indicates the static CR-LSP. 3. ldpLsp(3) -indicates the LDP LSP. 4. rsvpCrLsp(4) -indicates the RSVP LSP. 5. bgpLsp(5) -indicates the BGP LSP. 6. asbrLsp(6) -indicates the ASBR LSP. 7. bgpIpv6Lsp(7) -indicates the BGP IPv6 LSP. 8. l3vpnIpv6Lsp(8)-indicates the L3VPN IPv6 LSP. Enumeration: 'rsvpCrLsp': 4, 'ldpLsp': 3, 'staticCrLsp': 2, 'asbrLsp': 6, 'bgpLsp': 5, 'bgpIpv6Lsp': 7, 'staticLsp': 1, 'l3vpnIpv6Lsp': 8.
                     hwMplsLspStatisticsIngressLspCount 1.3.6.1.4.1.2011.5.25.121.4.1.1.2 unsigned32 read-only
This object indicates the number of ingress LSPs of a specified type.
                     hwMplsLspStatisticsTransitLspCount 1.3.6.1.4.1.2011.5.25.121.4.1.1.3 unsigned32 read-only
This object indicates the number of transit LSPs of a specified type.
                     hwMplsLspStatisticsEgressLspCount 1.3.6.1.4.1.2011.5.25.121.4.1.1.4 unsigned32 read-only
This object indicates the number of egress LSPs of a specified type.
                     hwMplsLspStatisticsTotalLspCount 1.3.6.1.4.1.2011.5.25.121.4.1.1.5 unsigned32 read-only
This object indicates the total number of the ingress LSPs, transit LSPs and egress LSP of specified types.
             hwMplsTrafficStatisticsStaticLspTable 1.3.6.1.4.1.2011.5.25.121.4.2 no-access
Indicates the traffic statistics of a LSP. The indexes of this table is hwMplsTrafficStatisticsStaticLspName.
                 hwMplsTrafficStatisticsStaticLspEntry 1.3.6.1.4.1.2011.5.25.121.4.2.1 no-access
Indicates the traffic statistics of a LSP. The indexes of this entry is hwMplsTrafficStatisticsStaticLspName.
                     hwMplsTrafficStatisticsStaticLspName 1.3.6.1.4.1.2011.5.25.121.4.2.1.1 snmpadminstring no-access
Indicates the name of the static LSP or CR-LSP. The name is appointed when the static LSP or CR-LSP is created.
                     hwMplsTrafficStatisticsStaticLspForwardInBytes 1.3.6.1.4.1.2011.5.25.121.4.2.1.2 counter64 read-only
An estimate of the forward of bistatic LSP's current incoming traffic statistics in units of bytes. For a sub-layer which has no concept of traffic statistics, this object should be zero. Unit: bytes
                     hwMplsTrafficStatisticsStaticLspForwardInPackets 1.3.6.1.4.1.2011.5.25.121.4.2.1.3 counter64 read-only
An estimate of the forward of bistatic LSP's current incoming traffic statistics in units of packets. For a sub-layer which has no concept of traffic statistics, this object should be zero. Unit: packets
                     hwMplsTrafficStatisticsStaticLspForwardOutBytes 1.3.6.1.4.1.2011.5.25.121.4.2.1.4 counter64 read-only
An estimate of the forward of bistatic LSP's current outgoing traffic statistics in units of bytes. For a sub-layer which has no concept of traffic statistics, this object should be zero. Unit: bytes
                     hwMplsTrafficStatisticsStaticLspForwardOutPackets 1.3.6.1.4.1.2011.5.25.121.4.2.1.5 counter64 read-only
An estimate of the forward of bistatic LSP's current outgoing traffic statistics in units of packets. For a sub-layer which has no concept of traffic statistics, this object should be zero. Unit: packets
                     hwMplsTrafficStatisticsStaticLspBackwardInBytes 1.3.6.1.4.1.2011.5.25.121.4.2.1.6 counter64 read-only
An estimate of the backward of bistatic LSP's current incoming traffic statistics in units of bytes. For a sub-layer which has no concept of traffic statistics, this object should be zero. Unit: bytes
                     hwMplsTrafficStatisticsStaticLspBackwardInPackets 1.3.6.1.4.1.2011.5.25.121.4.2.1.7 counter64 read-only
An estimate of the backward of bistatic LSP's current incoming traffic statistics in units of packets. For a sub-layer which has no concept of traffic statistics, this object should be zero. Unit: packets
                     hwMplsTrafficStatisticsStaticLspBackwardOutBytes 1.3.6.1.4.1.2011.5.25.121.4.2.1.8 counter64 read-only
An estimate of the backward of bistatic LSP's current outgoing traffic statistics in units of bytes. For a sub-layer which has no concept of traffic statistics, this object should be zero. Unit: bytes
                     hwMplsTrafficStatisticsStaticLspBackwardOutPackets 1.3.6.1.4.1.2011.5.25.121.4.2.1.9 counter64 read-only
An estimate of the backward of bistatic LSP's current outgoing traffic statistics in units of packets. For a sub-layer which has no concept of traffic statistics, this object should be zero. Unit: packets
         hwMplsExtendConformance 1.3.6.1.4.1.2011.5.25.121.6
             hwMplsExtendGroups 1.3.6.1.4.1.2011.5.25.121.6.1
                 hwMplsTunnelGroup 1.3.6.1.4.1.2011.5.25.121.6.1.1
Indicate the atrributes of the tunnel.
                 hwStaticLspGroup 1.3.6.1.4.1.2011.5.25.121.6.1.2
Indicate the atrributes of the static lsp.
                 hwMplsDsTeGroup 1.3.6.1.4.1.2011.5.25.121.6.1.3
Indicate the atrributes about DS-TE.
                 hwMplsLspStatisticsGroup 1.3.6.1.4.1.2011.5.25.121.6.1.4
Indicate LSP statistics.
                 hwMplsObsoleteGroup 1.3.6.1.4.1.2011.5.25.121.6.1.5
Indicate the OBSOLETE objects of MPLS.
                 hwMplsTrapGroup 1.3.6.1.4.1.2011.5.25.121.6.1.6
For mpls trap object.
                 hwMplsRingGroup 1.3.6.1.4.1.2011.5.25.121.6.1.7
For mpls ring trap object.
                 hwMplsGlobalGroup 1.3.6.1.4.1.2011.5.25.121.6.1.8
For mpls global object.
                 hwMplsLspGroup 1.3.6.1.4.1.2011.5.25.121.6.1.9
For mpls lsp object.
                 hwMplsLspTrafficStatisticGroup 1.3.6.1.4.1.2011.5.25.121.6.1.10
Indicate the traffic statistic of the LSP.
                 hwMplsResourceGroup 1.3.6.1.4.1.2011.5.25.121.6.1.11
For mpls resource object.
             hwMplsExtendCompliances 1.3.6.1.4.1.2011.5.25.121.6.2
                 hwExtendTrapGroup 1.3.6.1.4.1.2011.5.25.121.6.2.1
Indicate the traps.
                 hwObsoleteTrapGroup 1.3.6.1.4.1.2011.5.25.121.6.2.2
Indicate the Obsolete traps.
                 hwMplsModuleCompliance 1.3.6.1.4.1.2011.5.25.121.6.2.3
hwMplsModuleCompliance
         hwMplsRingMib 1.3.6.1.4.1.2011.5.25.121.7
             hwMplsRingTable 1.3.6.1.4.1.2011.5.25.121.7.1 no-access
Indicates the table information of the MPLS ring.
                 hwMplsRingEntry 1.3.6.1.4.1.2011.5.25.121.7.1.1 no-access
Indicates the table information of the MPLS ring.
                     hwMplsRingID 1.3.6.1.4.1.2011.5.25.121.7.1.1.1 unsigned32 no-access
Indicates the ID of the MPLS ring.
                     hwMplsRingNodeID 1.3.6.1.4.1.2011.5.25.121.7.1.1.2 unsigned32 read-only
Indicates the ID of the current Node on the MPLS ring.
                     hwMplsRingName 1.3.6.1.4.1.2011.5.25.121.7.1.1.3 octet string read-only
Indicates the name of MPLS ring.
                     hwMplsRingDirection 1.3.6.1.4.1.2011.5.25.121.7.1.1.4 octet string read-only
Indicates the direction of the MPLS ring.
                     hwMplsRingSwitchReason 1.3.6.1.4.1.2011.5.25.121.7.1.1.5 octet string read-only
Indicates the switch reason of the MPLS ring.
             hwMplsRingTrap 1.3.6.1.4.1.2011.5.25.121.7.2
                 hwMplsRingSwitch 1.3.6.1.4.1.2011.5.25.121.7.2.1
The notification indicates that the MPLS ring switched.
                 hwMplsRingResume 1.3.6.1.4.1.2011.5.25.121.7.2.2
The notification indicates that the MPLS ring resumed.
                 hwMplsRingWestOamLoss 1.3.6.1.4.1.2011.5.25.121.7.2.3
The notification indicates that no expected CV/FFD packet is received for three consecutive cycles in the west of the MPLS ring.
                 hwMplsRingWestOamLossClear 1.3.6.1.4.1.2011.5.25.121.7.2.4
The notification indicates that the hwMplsRingWestOamLoss alarm was cleared.
                 hwMplsRingEastOamLoss 1.3.6.1.4.1.2011.5.25.121.7.2.5
The notification indicates that no expected CV/FFD packet is received for three consecutive cycles in the east of the MPLS ring.
                 hwMplsRingEastOamLossClear 1.3.6.1.4.1.2011.5.25.121.7.2.6
The notification indicates that the hwMplsRingEastOamLoss alarm was cleared.
                 hwMplsRingWestOamRDI 1.3.6.1.4.1.2011.5.25.121.7.2.7
The notification indicates that RDI packets are received in the west of the MPLS ring, indicating that a fault occurs on the forward ring.
                 hwMplsRingWestOamRDIClear 1.3.6.1.4.1.2011.5.25.121.7.2.8
The notification indicates that the hwMplsRingWestOamRDI alarm was cleared.
                 hwMplsRingEastOamRDI 1.3.6.1.4.1.2011.5.25.121.7.2.9
The notification indicates that RDI packets are received in the east of the MPLS ring, indicating that a fault occurs on the forward ring.
                 hwMplsRingEastOamRDIClear 1.3.6.1.4.1.2011.5.25.121.7.2.10
The notification indicates that the hwMplsRingEastOamRDI alarm was cleared.
                 hwMplsRingWestOamUnexpectedMEG 1.3.6.1.4.1.2011.5.25.121.7.2.11
The notification indicates that a CCM frame carrying a correct MEG level but incorrect MEG ID is received in the west of the MPLS ring.
                 hwMplsRingWestOamUnexpectedMEGClear 1.3.6.1.4.1.2011.5.25.121.7.2.12
The notification indicates that the hwMplsRingWestOamUnexpectedMEG alarm was cleared.
                 hwMplsRingEastOamUnexpectedMEG 1.3.6.1.4.1.2011.5.25.121.7.2.13
The notification indicates that a CCM frame carrying a correct MEG level but incorrect MEG ID is received in the east of the MPLS ring.
                 hwMplsRingEastOamUnexpectedMEGClear 1.3.6.1.4.1.2011.5.25.121.7.2.14
The notification indicates that the hwMplsRingEastOamUnexpectedMEG alarm was cleared.
                 hwMplsRingWestOamUnexpectedPeriod 1.3.6.1.4.1.2011.5.25.121.7.2.15
The notification indicates that a CCM frame carrying a correct MEG level, MEG ID, and MEP ID but incorrect period value is received in the west MEP of the MPLS ring.
                 hwMplsRingWestOamUnexpectedPeriodClear 1.3.6.1.4.1.2011.5.25.121.7.2.16
The notification indicates that the hwMplsRingWestOamUnexpectedPeriod alarm was cleared.
                 hwMplsRingEastOamUnexpectedPeriod 1.3.6.1.4.1.2011.5.25.121.7.2.17
The notification indicates that a CCM frame carrying a correct MEG level, MEG ID, and MEP ID but incorrect period value is received in the east MEP of the MPLS ring.
                 hwMplsRingEastOamUnexpectedPeriodClear 1.3.6.1.4.1.2011.5.25.121.7.2.18
The notification indicates that the hwMplsRingEastOamUnexpectedPeriod alarm was cleared.
                 hwMplsRingWestOamExcess 1.3.6.1.4.1.2011.5.25.121.7.2.19
The notification indicates that five or more CV/FFD packets are correctly received within three consecutive cycles in the west of the MPLS ring.
                 hwMplsRingWestOamExcessClear 1.3.6.1.4.1.2011.5.25.121.7.2.20
The notification indicates that the hwMplsRingWestOamExcess alarm was cleared.
                 hwMplsRingEastOamExcess 1.3.6.1.4.1.2011.5.25.121.7.2.21
The notification indicates that five or more CV/FFD packets are correctly received within three consecutive cycles in the east of the MPLS ring.
                 hwMplsRingEastOamExcessClear 1.3.6.1.4.1.2011.5.25.121.7.2.22
The notification indicates that the hwMplsRingEastOamExcess alarm was cleared.
                 hwMplsRingWestOamSD 1.3.6.1.4.1.2011.5.25.121.7.2.23
The notification indicates that the number of packets for connectivity check received in the west of the MPLS ring is smaller than the SD threshold.
                 hwMplsRingWestOamSDClear 1.3.6.1.4.1.2011.5.25.121.7.2.24
The notification indicates that the hwMplsRingWestOamSD alarm was cleared.
                 hwMplsRingEastOamSD 1.3.6.1.4.1.2011.5.25.121.7.2.25
The notification indicates that the number of packets for connectivity check received in the east of the MPLS ring is smaller than the SD threshold.
                 hwMplsRingEastOamSDClear 1.3.6.1.4.1.2011.5.25.121.7.2.26
The notification indicates that the hwMplsRingEastOamSD alarm was cleared.
                 hwMplsRingWestOamSF 1.3.6.1.4.1.2011.5.25.121.7.2.27
The notification indicates that the number of packets for connectivity check received in the west of the MPLS ring is smaller than the SF threshold.
                 hwMplsRingWestOamSFClear 1.3.6.1.4.1.2011.5.25.121.7.2.28
The notification indicates that the hwMplsRingWestOamSF alarm was cleared.
                 hwMplsRingEastOamSF 1.3.6.1.4.1.2011.5.25.121.7.2.29
The notification indicates that the number of packets for connectivity check received in the east of the MPLS ring is smaller than the SF threshold.
                 hwMplsRingEastOamSFClear 1.3.6.1.4.1.2011.5.25.121.7.2.30
The notification indicates that the hwMplsRingEastOamSF alarm was cleared.
                 hwMplsRingWestAPSSwitch 1.3.6.1.4.1.2011.5.25.121.7.2.31
The notification indicates that APS switching occurs in the west of the MPLS ring.
                 hwMplsRingWestAPSResume 1.3.6.1.4.1.2011.5.25.121.7.2.32
The notification indicates that APS switches back in the west of the MPLS ring.
                 hwMplsRingEastAPSSwitch 1.3.6.1.4.1.2011.5.25.121.7.2.33
The notification indicates that APS switching occurs in the east of the MPLS ring.
                 hwMplsRingEastAPSResume 1.3.6.1.4.1.2011.5.25.121.7.2.34
The notification indicates that APS switches back in the east of the MPLS ring.
                 hwMplsRingWestAPSSwitchFail 1.3.6.1.4.1.2011.5.25.121.7.2.35
The notification indicates that the remote APS switching fails in the west of the MPLS ring.
                 hwMplsRingWestAPSSwitchFailClear 1.3.6.1.4.1.2011.5.25.121.7.2.36
The notification indicates that the hwMplsRingWestAPSSwitchFail alarm was cleared.
                 hwMplsRingEastAPSSwitchFail 1.3.6.1.4.1.2011.5.25.121.7.2.37
The notification indicates that the remote APS switching fails in the east of the MPLS ring.
                 hwMplsRingEastAPSSwitchFailClear 1.3.6.1.4.1.2011.5.25.121.7.2.38
The notification indicates that the hwMplsRingEastAPSSwitchFail alarm was cleared.
                 hwMplsRingWestAPSLost 1.3.6.1.4.1.2011.5.25.121.7.2.39
The notification indicates that APS packets are missing in the west of the MPLS ring.
                 hwMplsRingWestAPSLostClear 1.3.6.1.4.1.2011.5.25.121.7.2.40
The notification indicates that the hwMplsRingWestAPSLost alarm was cleared.
                 hwMplsRingEastAPSLost 1.3.6.1.4.1.2011.5.25.121.7.2.41
The notification indicates that APS packets are missing in the east of the MPLS ring.
                 hwMplsRingEastAPSLostClear 1.3.6.1.4.1.2011.5.25.121.7.2.42
The notification indicates that the hwMplsRingEastAPSLost alarm was cleared.
                 hwMplsRingWestAPSMismatch 1.3.6.1.4.1.2011.5.25.121.7.2.43
The notification indicates that the source ID carried by APS packets received in the west is different from the peer source ID configured for the west state machine on the MPLS ring.
                 hwMplsRingWestAPSMismatchClear 1.3.6.1.4.1.2011.5.25.121.7.2.44
The notification indicates that the hwMplsRingWestAPSMismatch alarm was cleared.
                 hwMplsRingEastAPSMismatch 1.3.6.1.4.1.2011.5.25.121.7.2.45
The notification indicates that the source ID carried by APS packets received in the east is different from the peer source ID configured for the east state machine on the MPLS ring.
                 hwMplsRingEastAPSMismatchClear 1.3.6.1.4.1.2011.5.25.121.7.2.46
The notification indicates that the hwMplsRingEastAPSMismatch alarm was cleared.
                 hwMplsRingWestOamUnexpectedMEP 1.3.6.1.4.1.2011.5.25.121.7.2.47
The notification indicates that a CCM frame carrying a correct MEG level and correct MEG ID but not the expected MEP ID is received in the west of the MPLS ring.
                 hwMplsRingWestOamUnexpectedMEPClear 1.3.6.1.4.1.2011.5.25.121.7.2.48
The notification indicates that the hwMplsRingWestOamUnexpectedMEP alarm was cleared.
                 hwMplsRingEastOamUnexpectedMEP 1.3.6.1.4.1.2011.5.25.121.7.2.49
The notification indicates that a CCM frame carrying a correct MEG level and correct MEG ID but not the expected MEP ID is received in the east of the MPLS ring.
                 hwMplsRingEastOamUnexpectedMEPClear 1.3.6.1.4.1.2011.5.25.121.7.2.50
The notification indicates that the hwMplsRingEastOamUnexpectedMEP alarm was cleared.