HUAWEI-LOAD-BACKUP-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-LOAD-BACKUP-MIB
Download as:   
SNMPv2-CONF, HUAWEI-DEVICE-MIB, HUAWEI-MIB, HUAWEI-TC-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwLoadBackup 1.3.6.1.4.1.2011.6.6
Huawei load and backup mib.
     hwLoadBackupMon 1.3.6.1.4.1.2011.6.6.1
         hwLoadParaTable 1.3.6.1.4.1.2011.6.6.1.1 no-access
The load parameter table.
             hwLoadParaEntry 1.3.6.1.4.1.2011.6.6.1.1.1 no-access
The load parameter table entry.
                 hwLoadServerIpAddr 1.3.6.1.4.1.2011.6.6.1.1.1.1 ipaddress read-write
The IP address of server.
                 hwLoadMode 1.3.6.1.4.1.2011.6.6.1.1.1.2 integer read-write
The load protocol. Enumeration: 'ftp': 3, 'tftp': 1, 'modem': 2, 'other': 255, 'smbLoadAnyBoards': 4.
                 hwLoadFileName 1.3.6.1.4.1.2011.6.6.1.1.1.3 displaystring read-write
The file name.
                 hwLoadContent 1.3.6.1.4.1.2011.6.6.1.1.1.4 integer read-write
Load content: enum explanation ********************************************** program(1), -- program file configuration(2), -- configuration file patch(3), -- patch file shellMacro(4), resLocal(5), resGeneral(6), cpeDrive(7), programDatabase(8), -- database file programBios(9), -- bios file programApp(10), -- application program logicFpga(11), -- fpga logic file logicCpld(12), -- Cpld logic file logicPci(13), -- pci logic file logicAfc(14), -- afc logic file programMicroCode(15), -- micro code file programFirmware(16), -- application program of pinch board programHelp(17), programDataFlow(18), -- flow file of card management point programBootFile(19), -- Boot program file of board logciPa(20), -- Boot program file of board start webExp(21), -- web exp file web exp webNev(22), -- web nev file web nev webHelp(23), -- web help file web programBsp(24), -- bsp program file bsp configurationIni(40), -- configuration file of ini formatini configurationEfs(41), -- configuration file with the header of efs configurationCli(42), -- configuration file of command line format programCurrent(45), -- the program being run programOther(46), -- the program that has not been run presently license(49), -- license file programchipset(50), -- AC5 chipset load Enumeration: 'programBsp': 24, 'logicAfc': 14, 'programMicroCode': 15, 'resGeneral': 6, 'programHelp': 17, 'resLocal': 5, 'programBootFile': 19, 'cpeDrive': 7, 'programDatabase': 8, 'programBios': 9, 'programchipset': 50, 'programOther': 46, 'programDataFlow': 18, 'logicCpld': 12, 'programCurrent': 45, 'program': 1, 'programFirmware': 16, 'logciPa': 20, 'shellMacro': 4, 'webExp': 21, 'programApp': 10, 'configurationIni': 40, 'configuration': 2, 'logicFpga': 11, 'license': 49, 'webNev': 22, 'patch': 3, 'programExtendedBios': 51, 'logicPci': 13, 'configurationCli': 42, 'webHelp': 23, 'configurationEfs': 41.
                 hwLoadBoardType 1.3.6.1.4.1.2011.6.6.1.1.1.5 hwpcbtype read-write
The board type the system supports.
                 hwPortId 1.3.6.1.4.1.2011.6.6.1.1.1.6 integer32 read-write
The port index.
                 hwLoadProcess 1.3.6.1.4.1.2011.6.6.1.1.1.7 integer32 read-only
The Process of loading.
                 hwLoadUserName 1.3.6.1.4.1.2011.6.6.1.1.1.8 displaystring read-write
The load user namewhich is necessary in FTP mode and unnecessary in TFTP mode.
                 hwLoadPassword 1.3.6.1.4.1.2011.6.6.1.1.1.9 displaystring read-write
The load user name,which is necessary in FTP mode , which is necessary in FTP mode and unnecessary in TFTP mode.
         hwBackupParaTable 1.3.6.1.4.1.2011.6.6.1.2 no-access
The backup parameter table.
             hwBackupParaEntry 1.3.6.1.4.1.2011.6.6.1.2.1 no-access
The backup parameter table entry.
                 hwBackupServerIpAddr 1.3.6.1.4.1.2011.6.6.1.2.1.1 ipaddress read-write
The IP address of Server
                 hwBackupMode 1.3.6.1.4.1.2011.6.6.1.2.1.2 integer read-write
Load protocol:tftp and MODEM currently supported. Enumeration: 'ftp': 3, 'tftp': 1, 'modem': 2, 'other': 4.
                 hwBackupFileName 1.3.6.1.4.1.2011.6.6.1.2.1.3 displaystring read-write
The file name.
                 hwBackupContent 1.3.6.1.4.1.2011.6.6.1.2.1.4 integer read-write
The backup content. Enumeration: 'programFireware': 27, 'programBsp': 34, 'logicAfc': 25, 'programMicroCode': 26, 'bcdcInfo': 47, 'programBootFile': 29, 'programDatabase': 19, 'programBios': 20, 'patch': 18, 'boardinfo': 60, 'log': 3, 'programOther': 46, 'programDataFlow': 28, 'logicCpld': 23, 'programCurrent': 45, 'program': 15, 'logciPa': 30, 'shellMacro': 2, 'webExp': 31, 'programApp': 21, 'configurationIni': 40, 'configuration': 1, 'logicFpga': 22, 'license': 49, 'webNev': 32, 'resgeneral': 17, 'alarm': 5, 'bill': 4, 'reslocal': 16, 'programExtendedBios': 51, 'logicPci': 24, 'configurationCli': 42, 'webHelp': 33, 'configurationEfs': 41.
                 hwBackupProcess 1.3.6.1.4.1.2011.6.6.1.2.1.5 integer32 read-only
The Process of backuping.
                 hwBackupUserName 1.3.6.1.4.1.2011.6.6.1.2.1.6 displaystring read-write
The backup user namewhich is necessary in FTP mode and unnecessary in TFTP mode.
                 hwBackupPassword 1.3.6.1.4.1.2011.6.6.1.2.1.7 displaystring read-write
The backup user name,which is necessary in FTP mode , which is necessary in FTP mode and unnecessary in TFTP mode.
                 hwBackupBoardType 1.3.6.1.4.1.2011.6.6.1.2.1.8 hwpcbtype read-write
The type of backup board.
         snmpTraps 1.3.6.1.4.1.2011.6.6.1.3
             hwLoadAndBackupTrapsOID 1.3.6.1.4.1.2011.6.6.1.3.0
                 hwBackupFailAlarm 1.3.6.1.4.1.2011.6.6.1.3.0.1
The back up failure alarm trap.
                 hwLoadFailAlarm 1.3.6.1.4.1.2011.6.6.1.3.0.2
The load failure alarm trap.
                 hwBackupFailAlarmSuccess 1.3.6.1.4.1.2011.6.6.1.3.0.3
The backup success notification.
                 hwLoadFailAlarmSuccess 1.3.6.1.4.1.2011.6.6.1.3.0.4
The load success notification.
                 hwCopyAndSaveFail 1.3.6.1.4.1.2011.6.6.1.3.0.5
Save configuration to flash failure trap.
                 hwCopyAndSaveSuccess 1.3.6.1.4.1.2011.6.6.1.3.0.6
Save configuration to flash success notification .
                 hwConfigurationChangedEvent 1.3.6.1.4.1.2011.6.6.1.3.0.7
The configuration changed event alarm.
             hwTrapCauseOids 1.3.6.1.4.1.2011.6.6.1.3.1
                 hwTrapLoadBackupResult 1.3.6.1.4.1.2011.6.6.1.3.1.1
                     hwTrapLoadResult 1.3.6.1.4.1.2011.6.6.1.3.1.1.1 integer32 no-access
The load result.
                     hwTrapBackupResult 1.3.6.1.4.1.2011.6.6.1.3.1.1.2 integer32 no-access
Definition node of the backup failure cause.
                     hwCopyAndSaveResult 1.3.6.1.4.1.2011.6.6.1.3.1.1.3 integer no-access
The failure cause definition node of the memory running copy and resume. Enumeration: 'copyFileChecksumError': 15, 'copyUnknownFailure': 17, 'copyInvalidProtocol': 4, 'copyNoMemory': 16, 'copyFileOpenError': 13, 'copyOperationSuccess': 2, 'copyDeviceFull': 12, 'copyInProgress': 1, 'copyInvalidDestName': 6, 'copyInvalidSourceName': 5, 'copyDeviceNotProgrammable': 11, 'copyInvalidServerAddress': 7, 'copyDeviceError': 10, 'copyFileTransferError': 14, 'copyDeviceBusy': 8, 'copyDeviceOpenError': 9, 'copyInvalidOperation': 3.
                 hwTrapEventCauses 1.3.6.1.4.1.2011.6.6.1.3.1.2
                     hwConfEventCause 1.3.6.1.4.1.2011.6.6.1.3.1.2.1 integer no-access
The configuration changed cause. Enumeration: 'confChangedDirect': 1, 'confChangedDuration': 3, 'confSaved': 2.
         hwBackupAndRestoreConfig 1.3.6.1.4.1.2011.6.6.1.4
             hwBackupAndRestore 1.3.6.1.4.1.2011.6.6.1.4.1 integer read-write
The running configuration in the system has been backup to flash or disk, or been restored from . Enumeration: 'copyMemToHardDisk': 3, 'copyHardDiskToMem': 4, 'copyFlashToMem': 2, 'copyMemToFlash': 1.
     hwPatch 1.3.6.1.4.1.2011.6.6.2
         hwPatchTable 1.3.6.1.4.1.2011.6.6.2.1 no-access
The operation and enquiry table of patch.
             hwPatchEntry 1.3.6.1.4.1.2011.6.6.2.1.1 no-access
The operation and enquiry table entry of patch.
                 hwPatchId 1.3.6.1.4.1.2011.6.6.2.1.1.1 unsigned32 no-access
The patch number.
                 hwPatchDescription 1.3.6.1.4.1.2011.6.6.2.1.1.2 displaystring read-only
The description of patch.
                 hwPatchFuncNum 1.3.6.1.4.1.2011.6.6.2.1.1.3 integer32 read-only
The number of functions in patch.
                 hwPatchTextLen 1.3.6.1.4.1.2011.6.6.2.1.1.4 integer32 read-only
The length of patch code.
                 hwPatchDataLen 1.3.6.1.4.1.2011.6.6.2.1.1.5 integer32 read-only
The length of patch data.
                 hwPatchType 1.3.6.1.4.1.2011.6.6.2.1.1.6 integer read-only
The type of patch. Enumeration: 'temporary': 2, 'common': 1.
                 hwPatchAdminStatus 1.3.6.1.4.1.2011.6.6.2.1.1.7 integer read-write
The operation of patch. Enumeration: 'active': 1, 'running': 4, 'remove': 3, 'deactive': 2.
                 hwPatchOperState 1.3.6.1.4.1.2011.6.6.2.1.1.8 integer read-only
The station of patch. Enumeration: 'patchRunning': 4, 'patchActive': 1, 'patchDeActive': 2, 'patchInit': 3, 'patchload': 5.
         hwPatchStatTable 1.3.6.1.4.1.2011.6.6.2.2 no-access
The table of statistics information of patch.
             hwPatchStatEntry 1.3.6.1.4.1.2011.6.6.2.2.1 no-access
The table entry of statistics information of patch.
                 hwPatchStatNumMax 1.3.6.1.4.1.2011.6.6.2.2.1.1 integer32 read-only
The maximum patch number of system.
                 hwPatchStatTextMax 1.3.6.1.4.1.2011.6.6.2.2.1.2 integer32 read-only
The capacity of patch code area.
                 hwPatchStatDataMax 1.3.6.1.4.1.2011.6.6.2.2.1.3 integer32 read-only
The capacity of patch data area.
                 hwPatchStatTextUsed 1.3.6.1.4.1.2011.6.6.2.2.1.4 integer32 read-only
The used patch code area.
                 hwPatchStatDataUsed 1.3.6.1.4.1.2011.6.6.2.2.1.5 integer32 read-only
The used patch data area.
     hwLoadBackupConformance 1.3.6.1.4.1.2011.6.6.3
         hwLoadBackupCompliances 1.3.6.1.4.1.2011.6.6.3.1
             hwLoadBackupCompliance 1.3.6.1.4.1.2011.6.6.3.1.1
The compliance statement for systems supporting the this module.
         hwLoadBackupObjectGroups 1.3.6.1.4.1.2011.6.6.3.2
             hwLoadParaTableGroup 1.3.6.1.4.1.2011.6.6.3.2.1
The load parameter group objects.
             hwBackupParaTableGroup 1.3.6.1.4.1.2011.6.6.3.2.2
The backup parameter group objects.
             hwTrapEventCausesGroup 1.3.6.1.4.1.2011.6.6.3.2.3
The trap event causes group objects.
             hwTrapLoadBackupResultGroup 1.3.6.1.4.1.2011.6.6.3.2.4
The load and backup result group objects.
             hwTrapLoadBackupTrapsGroup 1.3.6.1.4.1.2011.6.6.3.2.5
The load and backup traps group objects.
             hwBackupAndRestoreConfigGroup 1.3.6.1.4.1.2011.6.6.3.2.6
The load and backup config group objects.
             hwPatchTableGroup 1.3.6.1.4.1.2011.6.6.3.2.7
The patch table group objects.
             hwPatchStatTableGroup 1.3.6.1.4.1.2011.6.6.3.2.8
The patch statistics group objects.