FspR7-SPEQ-MIB: View SNMP OID List / Download MIB

VENDOR: ADVA AG OPTICAL NETWORKING


 Home MIB: FspR7-SPEQ-MIB
Download as:   
SNMPv2-CONF, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, FspR7-MIB, ADVA-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 speqMIB 1.3.6.1.4.1.2544.1.11.4
The Auto SPAN Equalization MIB.
     speqEntityMIB 1.3.6.1.4.1.2544.1.11.4.10
           speqEntityTable 1.3.6.1.4.1.2544.1.11.4.10.1 no-access
Table for SPEQ existing addresses. Entities in this table are either provisioned or not. Containers are always present in the table as long as their supporting entity is provisioned.
               speqEntityEntry 1.3.6.1.4.1.2544.1.11.4.10.1.1 no-access
Entry for SPEQ existing addresses.
                   speqEntityIndex 1.3.6.1.4.1.2544.1.11.4.10.1.1.1 entityindex no-access
Existing adress index
                   speqEntityContainedIn 1.3.6.1.4.1.2544.1.11.4.10.1.1.2 entityindex read-only
Contained in
                   speqEntityClassInstanceNumber 1.3.6.1.4.1.2544.1.11.4.10.1.1.3 integer32 read-only
The class instance number of this entity within the module(card)
                   speqEntityIndexAid 1.3.6.1.4.1.2544.1.11.4.10.1.1.4 snmpadminstring read-only
Name
           speqContainsTable 1.3.6.1.4.1.2544.1.11.4.10.2 no-access
Table for all existing addresses. Gives the index of the subtending entity in the containment.
               speqContainsEntry 1.3.6.1.4.1.2544.1.11.4.10.2.1 no-access
                   speqContainsIndex 1.3.6.1.4.1.2544.1.11.4.10.2.1.1 entityindex read-only
     speqConfigurationMIB 1.3.6.1.4.1.2544.1.11.4.12
           speqConfiguration 1.3.6.1.4.1.2544.1.11.4.12.1 fspr7speqconfig read-write
           speqDynamicComp 1.3.6.1.4.1.2544.1.11.4.12.2 fspr7speqdisableenable read-write
           speqConfigTable 1.3.6.1.4.1.2544.1.11.4.12.10 no-access
                 speqConfigEntry 1.3.6.1.4.1.2544.1.11.4.12.10.1 no-access
                     speqConfigAdmin 1.3.6.1.4.1.2544.1.11.4.12.10.1.1 fspr7adminstate read-write
                     speqConfigOpticalSetpoint 1.3.6.1.4.1.2544.1.11.4.12.10.1.2 integer32 read-write
                     speqConfigPerChannelPower 1.3.6.1.4.1.2544.1.11.4.12.10.1.3 integer32 read-write
                     speqConfigGainCal 1.3.6.1.4.1.2544.1.11.4.12.10.1.4 integer32 read-write
                     speqConfigOperate 1.3.6.1.4.1.2544.1.11.4.12.10.1.5 fspr7speqoperate read-write
           speqConfigCapTable 1.3.6.1.4.1.2544.1.11.4.12.11 no-access
                 speqConfigCapEntry 1.3.6.1.4.1.2544.1.11.4.12.11.1 no-access
                     speqConfigCapAdmin 1.3.6.1.4.1.2544.1.11.4.12.11.1.1 fspr7adminstatecaps read-only
                     speqConfigCapOpticalSetpoint 1.3.6.1.4.1.2544.1.11.4.12.11.1.2 fspr7integer32caps read-only
                     speqConfigCapPerChannelPower 1.3.6.1.4.1.2544.1.11.4.12.11.1.3 fspr7integer32caps read-only
                     speqConfigCapGainCal 1.3.6.1.4.1.2544.1.11.4.12.11.1.4 fspr7integer32caps read-only
     speqStatusMIB 1.3.6.1.4.1.2544.1.11.4.13
           speqStatusTable 1.3.6.1.4.1.2544.1.11.4.13.10 no-access
                 speqStatusEntry 1.3.6.1.4.1.2544.1.11.4.13.10.1 no-access
                     speqStatusOper 1.3.6.1.4.1.2544.1.11.4.13.10.1.1 fspr7operstate read-only
                     speqStatusSecondaryStates 1.3.6.1.4.1.2544.1.11.4.13.10.1.2 fspr7entitysecondarystates read-only
                     speqStatusQualify 1.3.6.1.4.1.2544.1.11.4.13.10.1.3 fspr7speqqualify read-only
                     speqStatusOpticalLineAid 1.3.6.1.4.1.2544.1.11.4.13.10.1.4 entityindex read-only
                     speqStatusOscAid 1.3.6.1.4.1.2544.1.11.4.13.10.1.5 entityindex read-only
                     speqStatusOpticalLineServiceType 1.3.6.1.4.1.2544.1.11.4.13.10.1.6 fspr7speqoptlineservice read-only
                     speqStatusPerChannelPowerLimit 1.3.6.1.4.1.2544.1.11.4.13.10.1.7 fspr7speqppclimit read-only
                     speqStatusCalculatedGain 1.3.6.1.4.1.2544.1.11.4.13.10.1.8 unsigned32 read-only
                     speqStatusStatus 1.3.6.1.4.1.2544.1.11.4.13.10.1.9 fspr7speqstatus read-only
                     speqStatusFarEndConfig 1.3.6.1.4.1.2544.1.11.4.13.10.1.10 fspr7speqfarendconfig read-only
                     speqStatusFarEndStatus 1.3.6.1.4.1.2544.1.11.4.13.10.1.11 fspr7speqstatus read-only
                     speqStatusFarEndPpc 1.3.6.1.4.1.2544.1.11.4.13.10.1.12 integer32 read-only
                     speqStatusFarEndOpt 1.3.6.1.4.1.2544.1.11.4.13.10.1.13 integer32 read-only
                     speqStatusFarEndOpr 1.3.6.1.4.1.2544.1.11.4.13.10.1.14 integer32 read-only
                     speqStatusNearEndOpt 1.3.6.1.4.1.2544.1.11.4.13.10.1.15 integer32 read-only
                     speqStatusNearEndOpr 1.3.6.1.4.1.2544.1.11.4.13.10.1.16 integer32 read-only
     speqAlarms 1.3.6.1.4.1.2544.1.11.4.14
           speqTraps 1.3.6.1.4.1.2544.1.11.4.14.1
               speqTrapsPrefix 1.3.6.1.4.1.2544.1.11.4.14.1.0
                   alarmOosDisabledSpeq 1.3.6.1.4.1.2544.1.11.4.14.1.0.120000
Non-Specific Disablement of Management Access
                   alarmOosMaintenanceSpeq 1.3.6.1.4.1.2544.1.11.4.14.1.0.120002
Alarms are logged but not notified, service affecting changes and operations are permitted
                   alarmMessageLossSpeq 1.3.6.1.4.1.2544.1.11.4.14.1.0.120004
SPEQ Message Loss
                   alarmOscFiberMissingSpeq 1.3.6.1.4.1.2544.1.11.4.14.1.0.120005
SPEQ not functioning, OSC Fiber(s) missing
                   alarmOptLowSpeq 1.3.6.1.4.1.2544.1.11.4.14.1.0.120006
Alarm is raised at SPEQ Booster-amp, when the OPT is less than the provisioned PPC by 2dBm.
                   alarmPpcOutOfRangeSpeq 1.3.6.1.4.1.2544.1.11.4.14.1.0.120007
Adopted PPC exceeded the PPC range
                   alarmGainTooHighSpeq 1.3.6.1.4.1.2544.1.11.4.14.1.0.120008
Auto Span Equalization Gain Out-of-Range, High - SPEQ calculated gain value is greater than the gain setting range of an EDFA type.
                   alarmGainTooLowSpeq 1.3.6.1.4.1.2544.1.11.4.14.1.0.120009
Auto Span Equalization Gain Out-of-Range, Low - SPEQ calculated gain value is lower than the gain setting range of an EDFA type.
                   alarmGainAdoptFailedSpeq 1.3.6.1.4.1.2544.1.11.4.14.1.0.120010
Alarm is raised when SPEQ Gain Adoption process fails.
                   speqCreation 1.3.6.1.4.1.2544.1.11.4.14.1.0.124001
This trap is sent every time an entity is created. No containers or other sub-entities in the chassis are reported created by this trap, the NMS must read these data.
                   speqDeletion 1.3.6.1.4.1.2544.1.11.4.14.1.0.124002
This trap is sent every time an entity is deleted. The sub-entities (containers, modules, etc.) are not reported deleted.
                   speqStateChange 1.3.6.1.4.1.2544.1.11.4.14.1.0.124003
This trap is sent when an entity state is changed.
                   speqObjectChange 1.3.6.1.4.1.2544.1.11.4.14.1.0.124004
This trap is sent when some object is changed.
                   transientGainAutoAdjustSpeq 1.3.6.1.4.1.2544.1.11.4.14.1.0.126000
Span Equalization Gain auto adjustment is triggered by monitoring LOS clear condition.
                   transientGainNoAdjustSpeq 1.3.6.1.4.1.2544.1.11.4.14.1.0.126001
Span Equalization Gain Not Adjusted.
                   transientGainAdjustFailedSpeq 1.3.6.1.4.1.2544.1.11.4.14.1.0.126002
Span Equalization Gain Adjustment Failed.
                   transientWaitSpeq 1.3.6.1.4.1.2544.1.11.4.14.1.0.126003
Auto Span Equalization is in progress; SPEQ-Server is busy, user must wait then request Span Equalization.
                   transientDenySpeq 1.3.6.1.4.1.2544.1.11.4.14.1.0.126004
Span Equalization request denied; operation could not be performed by the SPEQ-Server
                   transientPpcAdoptSpeq 1.3.6.1.4.1.2544.1.11.4.14.1.0.126005
PPC is auto calculated based on the adopted Gain for Brown-Field installations.
                   transientPpcLimitExceededSpeq 1.3.6.1.4.1.2544.1.11.4.14.1.0.126006
Provisioned per-channel power level exceeded the allowable limit
                   transientGainDynamicAdjustSpeq 1.3.6.1.4.1.2544.1.11.4.14.1.0.126007
Span Equalization Gain auto adjustment is triggered by dynamic optical power drift at Rx of the associated EDFA.
           speqConditions 1.3.6.1.4.1.2544.1.11.4.14.2
               speqConditionSeverityTable 1.3.6.1.4.1.2544.1.11.4.14.2.1 no-access
This table contains a severity value for each defined standing condition reported by an entity in the NE.
                   speqConditionSeverityEntry 1.3.6.1.4.1.2544.1.11.4.14.2.1.1 no-access
Each entry in the table represents the severity assigned to a condition.'
                       speqConditionSeverityType 1.3.6.1.4.1.2544.1.11.4.14.2.1.1.1 fspr7speqstandingconditiontypes no-access
This object identifies the type of alarm.
                       speqConditionSeverityValue 1.3.6.1.4.1.2544.1.11.4.14.2.1.1.2 trapalarmseverity read-write
This object identifies the severity assigned to this alarm.
               speqCurrentConditionTable 1.3.6.1.4.1.2544.1.11.4.14.2.2 no-access
                   speqCurrentConditionEntry 1.3.6.1.4.1.2544.1.11.4.14.2.2.1 no-access
                       speqCurrentConditionType 1.3.6.1.4.1.2544.1.11.4.14.2.2.1.1 fspr7speqstandingconditiontypes no-access
List of all interface conditions
                       speqCurrentConditionSeverity 1.3.6.1.4.1.2544.1.11.4.14.2.2.1.2 trapalarmseverity read-only
This object identifies the current severity of alarm.
                       speqCurrentConditionAffect 1.3.6.1.4.1.2544.1.11.4.14.2.2.1.3 serviceimpairment read-only
This object indicates the service impairment affect of the alarm.
                       speqCurrentConditionTimeStamp 1.3.6.1.4.1.2544.1.11.4.14.2.2.1.4 dateandtime read-only
Timestamp