F3-AMP-MIB: View SNMP OID List / Download MIB
VENDOR: ADVA AG OPTICAL NETWORKING
| Home | MIB: F3-AMP-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| f3AMPMIB | 1.3.6.1.4.1.2544.1.12.24 |
This module defines the Automatic Management Provisioning MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking. |
||
| f3AmpConfigObjects | 1.3.6.1.4.1.2544.1.12.24.1 | |||
| f3AmpConfigTable | 1.3.6.1.4.1.2544.1.12.24.1.1 | no-access |
A list of entries corresponding to Automatic Management Provisioning configuration instance for configuration purposes. |
|
| 1.3.6.1.4.1.2544.1.12.24.1.1.1 | no-access |
A conceptual row in the f3AmpConfigTable. |
||
| f3AmpConfigIndex | 1.3.6.1.4.1.2544.1.12.24.1.1.1.1 | integer32 | no-access |
An integer index value used to uniquely identify this AMP Config within the System. |
| f3AmpConfigRole | 1.3.6.1.4.1.2544.1.12.24.1.1.1.2 | amprole | read-only |
Configures AMP instance to be either Client or Server. |
| f3AmpConfigProtocol | 1.3.6.1.4.1.2544.1.12.24.1.1.1.3 | ampprotocol | read-only |
Configures protocol over which AMP message will be transported. |
| f3AmpConfigEnabled | 1.3.6.1.4.1.2544.1.12.24.1.1.1.4 | truthvalue | read-only |
Enables or Disables AMP on a Port. |
| f3AmpConfigPort | 1.3.6.1.4.1.2544.1.12.24.1.1.1.5 | variablepointer | read-only |
Port on which AMP Server or Client will operate. This port will transmit/receive AMP messages. The AMP can operate on Access Ports and Network Port and f3AmpConfigPort shall point to either cmEthernetAccPortIndex or cmEthernetNetPortIndex. |
| f3AmpConfigStatus | 1.3.6.1.4.1.2544.1.12.24.1.1.1.6 | ampstatus | read-only |
The Status of AMP. |
| f3AmpConfigRemSysName | 1.3.6.1.4.1.2544.1.12.24.1.1.1.7 | displaystring | read-only |
When f3AmpConfigRole is 'server' this object specifies sysName which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the sysName value which was received from the AMP Server. |
| f3AmpConfigRemSysIpAddr | 1.3.6.1.4.1.2544.1.12.24.1.1.1.8 | ipaddress | read-only |
When f3AmpConfigRole is 'server' this object specifies System IP address which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the System IP address value which was received from the AMP Server. |
| f3AmpConfigRemSysIpMask | 1.3.6.1.4.1.2544.1.12.24.1.1.1.9 | ipaddress | read-only |
When f3AmpConfigRole is 'server' this object specifies System IP mask which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the System IP mask value which was received from the AMP Server. |
| f3AmpConfigRemSysDefGateway | 1.3.6.1.4.1.2544.1.12.24.1.1.1.10 | ipaddress | read-only |
When f3AmpConfigRole is 'server' this object specifies System Default Gateway which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the System Default Gateway value which was received from the AMP Server. |
| f3AmpConfigRemSysSNMPV1IfName | 1.3.6.1.4.1.2544.1.12.24.1.1.1.11 | displaystring | read-only |
When f3AmpConfigRole is 'server' this object specifies System SNMPV1 Interface Name which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object shows the System SNMPV1 Interface Name value which was received from the AMP Server. |
| f3AmpConfigRemSysSrcIpAddrType | 1.3.6.1.4.1.2544.1.12.24.1.1.1.12 | ipsourceaddrtype | read-only |
When f3AmpConfigRole is 'server' this object specifies System Source IP Address type which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the System Source IP Address Type value which was received from the AMP Server. |
| f3AmpConfigRemSysSrcIpAddrIfName | 1.3.6.1.4.1.2544.1.12.24.1.1.1.13 | displaystring | read-only |
When f3AmpConfigRole is 'server' this object specifies System Source IP Interface name sent in an AMP message to be configured on an AMP Client device. When f3AmpConfigRole is 'client' this object shows the SystemSource IP Interface value which was received from the AMP Server. |
| f3AmpConfigRemTunnelIndex | 1.3.6.1.4.1.2544.1.12.24.1.1.1.14 | integer32 | read-only |
When f3AmpConfigRole is 'server' this object specifies index of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the index of a Management Tunnel which was received from the AMP Server. |
| f3AmpConfigRemTunnelName | 1.3.6.1.4.1.2544.1.12.24.1.1.1.15 | displaystring | read-only |
When f3AmpConfigRole is 'server' this object specifies a Management Tunnel name which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the Management Tunnel name which was received from the AMP Server. |
| f3AmpConfigRemTunnelType | 1.3.6.1.4.1.2544.1.12.24.1.1.1.16 | ipmanagementtunneltype | read-only |
When f3AmpConfigRole is 'server' this object specifies a Management Tunnel type value which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the Management Tunnel type value which was received from the AMP Server. |
| f3AmpConfigRemTunnelIpAddr | 1.3.6.1.4.1.2544.1.12.24.1.1.1.17 | ipaddress | read-only |
When f3AmpConfigRole is 'server' this object specifies IP Address of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the IP Address of a Management Tunnel which was received from the AMP Server. |
| f3AmpConfigRemTunnelIpMask | 1.3.6.1.4.1.2544.1.12.24.1.1.1.18 | ipaddress | read-only |
When f3AmpConfigRole is 'server' this object specifies IP Mask of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the IP Mask of a Management Tunnel which was received from the AMP Server. |
| f3AmpConfigRemTunnelVlanId | 1.3.6.1.4.1.2544.1.12.24.1.1.1.19 | vlanid | read-only |
When f3AmpConfigRole is 'server' this object specifies VlanId of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the VlanId of a Management Tunnel which was received from the AMP Server. |
| f3AmpConfigRemTunnelSVlanId | 1.3.6.1.4.1.2544.1.12.24.1.1.1.20 | vlanid | read-only |
When f3AmpConfigRole is 'server' this object specifies S-TAG VlanId of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the S-TAG VlanId of a Management Tunnel which was received from the AMP Server. |
| f3AmpConfigRemTunnelSVlanIdEnabled | 1.3.6.1.4.1.2544.1.12.24.1.1.1.21 | truthvalue | read-only |
When f3AmpConfigRole is 'server' this object specifies a Management Tunnel S-TAG VlanId Enable value which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the a Management Tunnel S-TAG VlanId Enabled value which was received from the AMP Server. |
| f3AmpConfigRemTunnelRip2PktsEnabled | 1.3.6.1.4.1.2544.1.12.24.1.1.1.22 | truthvalue | read-only |
When f3AmpConfigRole is 'server' this object specifies a Management Tunnel RIP2 Packates Enabled value which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the a Management Tunnel RIP2 Packates Enabled value which was received from the AMP Server. |
| f3AmpConfigRemTunnelCOS | 1.3.6.1.4.1.2544.1.12.24.1.1.1.23 | integer32 | read-only |
When f3AmpConfigRole is 'server' this object specifies COS of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the COS of a Management Tunnel which was received from the AMP Server. |
| f3AmpConfigRemTunnelCIR | 1.3.6.1.4.1.2544.1.12.24.1.1.1.24 | unsigned32 | read-only |
When f3AmpConfigRole is 'server' this object specifies CIR of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the CIR of a Management Tunnel which was received from the AMP Server. |
| f3AmpConfigRemTunnelEIR | 1.3.6.1.4.1.2544.1.12.24.1.1.1.25 | unsigned32 | read-only |
When f3AmpConfigRole is 'server' this object specifies EIR of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the EIR of a Management Tunnel which was received from the AMP Server. |
| f3AmpConfigRemTunnelBufferSize | 1.3.6.1.4.1.2544.1.12.24.1.1.1.26 | unsigned32 | read-only |
When f3AmpConfigRole is 'server' this object specifies Buffer Size of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the Buffer Size of a Management Tunnel which was received from the AMP Server. |
| f3AmpConfigRemTunnelEncapType | 1.3.6.1.4.1.2544.1.12.24.1.1.1.27 | ipmanagementtunnelencapsulationtype | read-only |
When f3AmpConfigRole is 'server' this object specifies Encapsulation Type of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the Encapsulation Type of a Management Tunnel which was received from the AMP Server. |
| f3AmpConfigRemTunnelMtu | 1.3.6.1.4.1.2544.1.12.24.1.1.1.28 | integer32 | read-only |
When f3AmpConfigRole is 'server' this object specifies MTU of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the MTU of a Management Tunnel which was received from the AMP Server. |
| f3AmpConfigAction | 1.3.6.1.4.1.2544.1.12.24.1.1.1.29 | ampconfigaction | read-only |
This object may be used to initiate user action on this AMP Config instance. |
| f3AmpConfigStorageType | 1.3.6.1.4.1.2544.1.12.24.1.1.1.30 | storagetype | read-only |
The type of storage configured for this entry. |
| f3AmpConfigRowStatus | 1.3.6.1.4.1.2544.1.12.24.1.1.1.31 | rowstatus | read-only |
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3AmpConfigRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3AmpConfigRowStatus object may be modified if the associated instance of this object is equal to active(1). |
| f3AmpStatsObjects | 1.3.6.1.4.1.2544.1.12.24.2 | |||
| f3AmpStatsTable | 1.3.6.1.4.1.2544.1.12.24.2.1 | no-access |
A list of entries corresponding to Automatic Management Provisioning Statistics |
|
| 1.3.6.1.4.1.2544.1.12.24.2.1.1 | no-access |
A conceptual row in the f3AmpStatsTable. |
||
| f3AmpStatsProvDataTx | 1.3.6.1.4.1.2544.1.12.24.2.1.1.1 | unsigned32 | read-only |
The number of Provisioning Data messages sent by AMP Server. |
| f3AmpStatsProvDataRx | 1.3.6.1.4.1.2544.1.12.24.2.1.1.2 | unsigned32 | read-only |
The number of Provisioning Data messages received by AMP Client. |
| f3AmpStatsProvRequestTx | 1.3.6.1.4.1.2544.1.12.24.2.1.1.3 | unsigned32 | read-only |
The number of Provisioning Request messages sent by AMP Client. |
| f3AmpStatsProvRequestRx | 1.3.6.1.4.1.2544.1.12.24.2.1.1.4 | unsigned32 | read-only |
The number of Provisioning Request received sent by AMP Server. |
| f3AmpStatsConfigSuccessTx | 1.3.6.1.4.1.2544.1.12.24.2.1.1.5 | unsigned32 | read-only |
The number of Configuration Success messages sent sent by AMP Client. |
| f3AmpStatsConfigSuccessRx | 1.3.6.1.4.1.2544.1.12.24.2.1.1.6 | unsigned32 | read-only |
The number of Configuration Success messages received by AMP Server. |
| f3AmpStatsConfigFailTx | 1.3.6.1.4.1.2544.1.12.24.2.1.1.7 | unsigned32 | read-only |
The number of Configuration Success messages received by AMP Client. |
| f3AmpStatsConfigFailRx | 1.3.6.1.4.1.2544.1.12.24.2.1.1.8 | unsigned32 | read-only |
The number of Configuration Success messages received by AMP Server. |
| f3AmpStatsSpuriousMessageRx | 1.3.6.1.4.1.2544.1.12.24.2.1.1.9 | unsigned32 | read-only |
The number of Spurious messages received by AMP Client or Server |
| f3AmpStatsTimeoutRx | 1.3.6.1.4.1.2544.1.12.24.2.1.1.10 | unsigned32 | read-only |
The number of messages which were not received within the time out value. AMP Client can time out while waiting for Prov Data message. AMP Server can time out while waiting for Config Fail or Config Success message. |
| f3AmpStatsLastRxStatus | 1.3.6.1.4.1.2544.1.12.24.2.1.1.11 | ampconfigstatus | read-only |
Last received Configuration Status. |
| f3AmpStatsRxTimeStamp | 1.3.6.1.4.1.2544.1.12.24.2.1.1.12 | dateandtime | read-only |
Time of last received Configuration Status. |
| f3AmpStatsLastTxStatus | 1.3.6.1.4.1.2544.1.12.24.2.1.1.13 | ampconfigstatus | read-only |
Last sent Configuration Status. |
| f3AmpStatsTxTimeStamp | 1.3.6.1.4.1.2544.1.12.24.2.1.1.14 | dateandtime | read-only |
Time of last sent Configuration Status. |
| f3AmpConformance | 1.3.6.1.4.1.2544.1.12.24.3 | |||
| f3AmpCompliances | 1.3.6.1.4.1.2544.1.12.24.3.1 | |||
| f3AmpCompliance | 1.3.6.1.4.1.2544.1.12.24.3.1.1 |
Describes the requirements for conformance to the F3-AMP-MIB compilance. |
||
| f3AmpGroups | 1.3.6.1.4.1.2544.1.12.24.3.2 | |||
| f3AmpConfigGroup | 1.3.6.1.4.1.2544.1.12.24.3.2.1 |
A collection of objects used to manage the AMP Configuration. |
||
| f3AmpStatsGroup | 1.3.6.1.4.1.2544.1.12.24.3.2.2 |
A collection of objects used to manage the AMP Statistics. |
||