CM-IP-MIB: View SNMP OID List / Download MIB

VENDOR: ADVA AG OPTICAL NETWORKING


 Home MIB: CM-IP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, CM-COMMON-MIB, ADVA-MIB, SNMPv2-TC, IPV6-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cmIPMIB 1.3.6.1.4.1.2544.1.12.11
This module defines the IP MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA.
       cmIpObjects 1.3.6.1.4.1.2544.1.12.11.1
           cmIpInterfaceTable 1.3.6.1.4.1.2544.1.12.11.1.1 no-access
User managed IP Address Table.
               cmIpInterfaceEntry 1.3.6.1.4.1.2544.1.12.11.1.1.1 no-access
Allows management of IP Interfaces.
                   cmIpInterfaceName 1.3.6.1.4.1.2544.1.12.11.1.1.1.1 displaystring read-only
Name of the IP interface.
                   cmIpInterface 1.3.6.1.4.1.2544.1.12.11.1.1.1.2 ipaddress read-write
IP Address of the interface.
                   cmIpInterfaceMask 1.3.6.1.4.1.2544.1.12.11.1.1.1.3 ipaddress read-write
IP Mask of the interface.
                   cmIpInterfaceDhcpEnabled 1.3.6.1.4.1.2544.1.12.11.1.1.1.4 truthvalue read-write
Whether or not DHCP is enabled on this interface.
                   cmIpInterfaceMTU 1.3.6.1.4.1.2544.1.12.11.1.1.1.5 integer32 read-write
IP Interface MTU.
                   cmIpInterfaceDhcpRole 1.3.6.1.4.1.2544.1.12.11.1.1.1.6 cmdhcprole read-write
Specify the DHCP role on this interface.
                   cmIpInterfacePhysicalAddress 1.3.6.1.4.1.2544.1.12.11.1.1.1.7 displaystring read-only
Physical Address associated with the IP Address.
                   cmIpInterfaceRIPv2Enabled 1.3.6.1.4.1.2544.1.12.11.1.1.1.8 truthvalue read-write
This object allows to enable/disable RIPv2 on the IP Interface.
                   cmIpInterfaceDHCPClientIdEnabled 1.3.6.1.4.1.2544.1.12.11.1.1.1.9 truthvalue read-write
This object enables DHCP Option 61 on the IP interface. This object is only applicable when DHCP client is enabled.
                   cmIpInterfaceDHCPClientId 1.3.6.1.4.1.2544.1.12.11.1.1.1.10 displaystring read-write
This object is applicable when cmIpInterfaceDHCPClientIdEnabled is set to TRUE. It allows users to specify the DHCP Client Id as a DisplayString - instead of the MAC address.
                   cmIpInterfaceIpMode 1.3.6.1.4.1.2544.1.12.11.1.1.1.11 ipmode read-write
This object is the ipmode for the interface.
                   cmIpInterfaceDhcpClassIdEnabled 1.3.6.1.4.1.2544.1.12.11.1.1.1.12 truthvalue read-write
This object describe whether class id editable enabled.
                   cmIpInterfaceDhcpHostNameEnabled 1.3.6.1.4.1.2544.1.12.11.1.1.1.13 truthvalue read-write
This object describe whether host name editable enabled.
                   cmIpInterfaceDhcpHostName 1.3.6.1.4.1.2544.1.12.11.1.1.1.14 displaystring read-write
This object describe the host name.
                   cmIpInterfaceDhcpLogServerEnabled 1.3.6.1.4.1.2544.1.12.11.1.1.1.15 truthvalue read-write
This object describe whether the dhcp log server enabled.
                   cmIpInterfaceDhcpNTPServerEnabled 1.3.6.1.4.1.2544.1.12.11.1.1.1.16 truthvalue read-write
This object describe whether the dhcp ntp server enabled.
                   cmIpInterfaceDhcpClientIdType 1.3.6.1.4.1.2544.1.12.11.1.1.1.17 dhcpcidtype read-write
This object describe whether the dhcp cid type.
                   cmIpInterfaceDhcpHostNameType 1.3.6.1.4.1.2544.1.12.11.1.1.1.18 dhcphostnametype read-write
This object describe whether the dhcp host name type.
                   cmIpInterfaceDhcpVendorInfoEnabled 1.3.6.1.4.1.2544.1.12.11.1.1.1.19 truthvalue read-write
This object means the vendor information whether enabled.
                   cmIpInterfaceDhcpVendorInfoType 1.3.6.1.4.1.2544.1.12.11.1.1.1.20 dhcpvendorinfotype read-write
This object describe whether the dhcp vendor information type.
                   cmIpInterfaceDhcpVendorInfo 1.3.6.1.4.1.2544.1.12.11.1.1.1.21 displaystring read-write
This object describe the vendor information.
                   cmIpInterfaceDhcpVendorInfoHideControl 1.3.6.1.4.1.2544.1.12.11.1.1.1.22 truthvalue read-write
This object describe whether the dhcp vendor info is hidden or not
                   cmIpInterfaceGateway 1.3.6.1.4.1.2544.1.12.11.1.1.1.23 ipaddress read-write
This object desribes the IPv4 Gateway Address of the management interface on OSA540X.
           cmStaticRouteTable 1.3.6.1.4.1.2544.1.12.11.1.2 no-access
This entity's user configured Static IP Routing table.
               cmStaticRouteEntry 1.3.6.1.4.1.2544.1.12.11.1.2.1 no-access
A particular route to a particular destina- tion, under a particular policy.
                   cmStaticRouteDest 1.3.6.1.4.1.2544.1.12.11.1.2.1.1 ipaddress read-only
The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the cmStaticRouteMask object is not equal to x.
                   cmStaticRouteMask 1.3.6.1.4.1.2544.1.12.11.1.2.1.2 ipaddress read-only
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the cmStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the cmStaticRouteMask by reference to the IP Ad- dress Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the cmStaticRouteDest object is not equal to cmStaticRouteDest.
                   cmStaticRouteNextHop 1.3.6.1.4.1.2544.1.12.11.1.2.1.3 ipaddress read-only
On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.
                   cmStaticRouteMetric 1.3.6.1.4.1.2544.1.12.11.1.2.1.4 integer32 read-only
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's cmStaticRouteProto value. If this metric is not used, its value should be set to 1.
                   cmStaticRouteRowStatus 1.3.6.1.4.1.2544.1.12.11.1.2.1.5 rowstatus read-only
The row status variable, used according to row installation and removal conventions.
                   cmStaticRouteInterface 1.3.6.1.4.1.2544.1.12.11.1.2.1.6 displaystring read-only
Name of the IP interface for the interface static route.
                   cmStaticRouteAdvertise 1.3.6.1.4.1.2544.1.12.11.1.2.1.7 truthvalue read-only
Whether this static route will be advertised via routing protocol.
           cmARPTable 1.3.6.1.4.1.2544.1.12.11.1.3 no-access
A list of ARP entries on the NIDs.
               cmARPEntry 1.3.6.1.4.1.2544.1.12.11.1.3.1 no-access
A conceptual row in the cmARPTable. Entries can be created/deleted in this table by management application action.
                   cmARPIndex 1.3.6.1.4.1.2544.1.12.11.1.3.1.1 integer32 read-only
An integer index value used to uniquely identify this ARP Entry in the cmARPTable.
                   cmARPIPAddress 1.3.6.1.4.1.2544.1.12.11.1.3.1.2 ipaddress read-only
This object allows configuration of the ARP Entry IP Address.
                   cmARPMacAddress 1.3.6.1.4.1.2544.1.12.11.1.3.1.3 macaddress read-only
This object allows management of the ARP Entry MAC Address.
                   cmARPInterface 1.3.6.1.4.1.2544.1.12.11.1.3.1.4 displaystring read-only
This object allows management of the ARP Entry Interface.
                   cmARPStorageType 1.3.6.1.4.1.2544.1.12.11.1.3.1.5 storagetype read-only
The type of storage configured for this entry.
                   cmARPRowStatus 1.3.6.1.4.1.2544.1.12.11.1.3.1.6 rowstatus read-write
The status of this row. The cmARPRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3).
                   cmARPEntryType 1.3.6.1.4.1.2544.1.12.11.1.3.1.7 ipentrytype read-write
The type of ARP Entry. Note that static entries can be created.
           cmProxyARPTable 1.3.6.1.4.1.2544.1.12.11.1.4 no-access
A list of Proxy ARP entries on the NIDs. This table is not supported in GE206 Release 4.1CC.
               cmProxyARPEntry 1.3.6.1.4.1.2544.1.12.11.1.4.1 no-access
A conceptual row in the cmProxyARPTable. Entries can be created/deleted in this table by management application action.
                   cmProxyARPIndex 1.3.6.1.4.1.2544.1.12.11.1.4.1.1 integer32 read-only
An integer index value used to uniquely identify this Proxy ARP Entry in the cmProxyARPTable.
                   cmProxyARPIPAddress 1.3.6.1.4.1.2544.1.12.11.1.4.1.2 ipaddress read-only
This object allows configuration of the ProxyARP Entry IP Address.
                   cmProxyARPSubnetMask 1.3.6.1.4.1.2544.1.12.11.1.4.1.3 ipaddress read-only
This object allows management of the Proxy ARP Entry Subnet Mask.
                   cmProxyARPInterface 1.3.6.1.4.1.2544.1.12.11.1.4.1.4 displaystring read-only
This object allows management of the Proxy ARP Entry Interface.
                   cmProxyARPStorageType 1.3.6.1.4.1.2544.1.12.11.1.4.1.5 storagetype read-only
The type of storage configured for this entry.
                   cmProxyARPRowStatus 1.3.6.1.4.1.2544.1.12.11.1.4.1.6 rowstatus read-write
The status of this row. The cmProxyARPRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3).
           ipManagementTunnelTable 1.3.6.1.4.1.2544.1.12.11.1.5 no-access
A list of IP Management Tunnel entries on the fsp150 family of products.
               ipManagementTunnelEntry 1.3.6.1.4.1.2544.1.12.11.1.5.1 no-access
A conceptual row in the ipManagementTunnelTable. Entries can be created/deleted in this table by management application action.
                   ipManagementTunnelIndex 1.3.6.1.4.1.2544.1.12.11.1.5.1.1 integer32 read-only
A unique integer index value used to uniquely identify a Management Tunnel Entry in the ipManagementTunnelTable.
                   ipManagementTunnelAssociatedPort 1.3.6.1.4.1.2544.1.12.11.1.5.1.2 variablepointer read-only
This allows specification of the associated physical port on the device, to which the Management Tunnel is attached.
                   ipManagementTunnelName 1.3.6.1.4.1.2544.1.12.11.1.5.1.3 displaystring read-only
This allows specification of a unique name which is also used as the name of the IP interface, to which the Management Tunnel is attached.
                   ipManagementTunnelType 1.3.6.1.4.1.2544.1.12.11.1.5.1.4 ipmanagementtunneltype read-only
This allows specification of the type of management tunnel, whether it is a VLAN based tunnel or a MAC based tunnel.
                   ipManagementTunnelMTU 1.3.6.1.4.1.2544.1.12.11.1.5.1.5 integer32 read-write
This provides the MTU of the Management Tunnel.
                   ipManagementTunnelEncapsulationType 1.3.6.1.4.1.2544.1.12.11.1.5.1.6 ipmanagementtunnelencapsulationtype read-only
This allows specification of the encapsulation type of management tunnel. Only Ethernet encapsulation is currently supported.
                   ipManagementTunnelIpAddress 1.3.6.1.4.1.2544.1.12.11.1.5.1.7 ipaddress read-only
This object allows configuration of the Management Tunnel IP Address.
                   ipManagementTunnelSubnetMask 1.3.6.1.4.1.2544.1.12.11.1.5.1.8 ipaddress read-only
This object allows management of the Management Tunnel Subnet Mask.
                   ipManagementTunnelVlanId 1.3.6.1.4.1.2544.1.12.11.1.5.1.9 vlanid read-only
This object allows specification of the VLAN Id in the case of a VLAN management tunnel. This object is not relevant for a MAC based management tunnel.
                   ipManagementTunnelSVlanEnabled 1.3.6.1.4.1.2544.1.12.11.1.5.1.10 truthvalue read-only
This object allows specification of whether or not the S-TAG is enabled on the IP Management Tunnel. This object is not relevant for a MAC based management tunnel.
                   ipManagementTunnelSVlanId 1.3.6.1.4.1.2544.1.12.11.1.5.1.11 vlanid read-only
This object allows specification of the S-TAG VLAN Id in the case of a VLAN management tunnel, when S-TAG is also enabled. This object is not relevant for a MAC based management tunnel, as well as when the ipManagementTunnelSVlanEnabled is set to false.
                   ipManagementTunnelDhcpEnabled 1.3.6.1.4.1.2544.1.12.11.1.5.1.12 truthvalue read-only
This object allows specification of whether or not DHCP is enabled on the IP Management Tunnel.
                   ipManagementTunnelRip2PktsEnabled 1.3.6.1.4.1.2544.1.12.11.1.5.1.13 truthvalue read-only
This object allows specification of whether or not RIP2 is enabled on the IP Management Tunnel.
                   ipManagementTunnelPhysicalAddress 1.3.6.1.4.1.2544.1.12.11.1.5.1.14 displaystring read-only
This object provides the physical address (MAC Address) associated with the IP Management Tunnel.
                   ipManagementTunnelCOS 1.3.6.1.4.1.2544.1.12.11.1.5.1.15 integer32 read-only
This object allows specification of the Class of Service associated with the IP Management Tunnel. This value is also used in the p-bits of the VLAN based management tunnels (for both VLANs in case S-TAG is enabled).
                   ipManagementTunnelCIR 1.3.6.1.4.1.2544.1.12.11.1.5.1.16 unsigned32 read-only
This object allows specification of the Management Tunnel CIR.
                   ipManagementTunnelEIR 1.3.6.1.4.1.2544.1.12.11.1.5.1.17 unsigned32 read-only
This object allows specification of the Management Tunnel EIR.
                   ipManagementTunnelBufferSize 1.3.6.1.4.1.2544.1.12.11.1.5.1.18 unsigned32 read-only
This object allows specification of the Management Tunnel Buffer Size.
                   ipManagementTunnelStorageType 1.3.6.1.4.1.2544.1.12.11.1.5.1.19 storagetype read-only
The type of storage configured for this entry.
                   ipManagementTunnelRowStatus 1.3.6.1.4.1.2544.1.12.11.1.5.1.20 rowstatus read-write
The status of this row. The ipManagementTunnelRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3).
                   ipManagementTunnelDHCPClientIdEnabled 1.3.6.1.4.1.2544.1.12.11.1.5.1.21 truthvalue read-write
This object enables DHCP Option 61 on the Management Tunnel. This object is only applicable when DHCP client is enabled.
                   ipManagementTunnelDHCPClientId 1.3.6.1.4.1.2544.1.12.11.1.5.1.22 displaystring read-write
This object is applicable when ipManagementTunnelDHCPClientIdEnabled is set to TRUE. It allows users to specify the DHCP Client Id as a DisplayString - instead of the MAC address.
                   ipManagementTunnelQosQueueProfile 1.3.6.1.4.1.2544.1.12.11.1.5.1.23 variablepointer read-write
This object identifies the OID of cmQosQueueProfileIndex in the cmQosQueueProfileTable.
                   ipManagementTunnelCVlanEnabled 1.3.6.1.4.1.2544.1.12.11.1.5.1.24 truthvalue read-write
This object CTAG whether enabled, By default it is enabled.
                   ipManagementTunnelDHCPv6Enabled 1.3.6.1.4.1.2544.1.12.11.1.5.1.25 truthvalue read-write
This object DHCPv6 whether enabled, By default it is enabled.
                   ipManagementTunnelIpv6Address 1.3.6.1.4.1.2544.1.12.11.1.5.1.26 ipv6address read-write
This object means the unicast ipv6 address.
                   ipManagementTunnelIpv6AddrPrefixLen 1.3.6.1.4.1.2544.1.12.11.1.5.1.27 integer32 read-write
This object means the unicast ipv6 address prefix length.
                   ipManagementTunnelIpv6StateAddrAutoConfigEnabled 1.3.6.1.4.1.2544.1.12.11.1.5.1.28 truthvalue read-write
This object Ipv6StateAddrAutoConfig whether enabled, By default it is enabled.
                   ipManagementTunnellinkLocIpv6Addr 1.3.6.1.4.1.2544.1.12.11.1.5.1.29 ipv6address read-only
This object means the link local ipv6 address.
                   ipManagementTunnellinkLocIpv6AddrPrefixLen 1.3.6.1.4.1.2544.1.12.11.1.5.1.30 integer32 read-only
This object means the link local ipv6 address prefix length.
                   ipManagementTunnelIpv6PrefixAdvertiseEnabled 1.3.6.1.4.1.2544.1.12.11.1.5.1.31 truthvalue read-write
This object means the prefix advertise whether enabled.
                   ipManagementTunnelIpv6Prefix 1.3.6.1.4.1.2544.1.12.11.1.5.1.32 ipv6address read-write
This object means the prefix ipv6 address.
                   ipManagementTunnelIpv6PrefixLen 1.3.6.1.4.1.2544.1.12.11.1.5.1.33 integer32 read-write
This object means the link local ipv6 address prefix length.
                   ipManagementTunnelIpMode 1.3.6.1.4.1.2544.1.12.11.1.5.1.34 ipmode read-write
This object means the ip mode for the management tunnel.
                   ipManagementTunnelIpv6RipngEnabled 1.3.6.1.4.1.2544.1.12.11.1.5.1.35 truthvalue read-write
This object means the ipv6's Ripng whether enabled.
                   ipManagementTunnelDhcpClassIdEnabled 1.3.6.1.4.1.2544.1.12.11.1.5.1.36 truthvalue read-write
This object means the class id whether enabled.
                   ipManagementTunnelDhcpHostNameEnabled 1.3.6.1.4.1.2544.1.12.11.1.5.1.37 truthvalue read-write
This object means the host name whether enabled.
                   ipManagementTunnelDhcpHostName 1.3.6.1.4.1.2544.1.12.11.1.5.1.38 displaystring read-write
This object describe the host name.
                   ipManagementTunnelDhcpLogServerEnabled 1.3.6.1.4.1.2544.1.12.11.1.5.1.39 truthvalue read-write
This object describe whether the dhcp log server enabled.
                   ipManagementTunnelDhcpNTPServerEnabled 1.3.6.1.4.1.2544.1.12.11.1.5.1.40 truthvalue read-write
This object describe whether the dhcp ntp server enabled.
                   ipManagementTunnelDhcpClientIdType 1.3.6.1.4.1.2544.1.12.11.1.5.1.41 dhcpcidtype read-write
This object describe whether the dhcp cid type.
                   ipManagementTunnelDhcpHostNameType 1.3.6.1.4.1.2544.1.12.11.1.5.1.42 dhcphostnametype read-write
This object describe whether the dhcp host name type.
                   ipManagementTunnelDhcpVendorInfoEnabled 1.3.6.1.4.1.2544.1.12.11.1.5.1.43 truthvalue read-write
This object means the vendor information whether enabled.
                   ipManagementTunnelDhcpVendorInfoType 1.3.6.1.4.1.2544.1.12.11.1.5.1.44 dhcpvendorinfotype read-write
This object describe whether the dhcp vendor information type.
                   ipManagementTunnelDhcpVendorInfo 1.3.6.1.4.1.2544.1.12.11.1.5.1.45 displaystring read-write
This object describe the vendor information.
                   ipManagementTunnelDhcpVendorInfoHideControl 1.3.6.1.4.1.2544.1.12.11.1.5.1.46 truthvalue read-write
This object describe whether the dhcp vendor info is hidden or not.
                   ipManagementTunnelSharedVim 1.3.6.1.4.1.2544.1.12.11.1.5.1.47 truthvalue read-write
This object describes if tunnel share vlan with vim tunnel.
           cmIpv6InterfaceTable 1.3.6.1.4.1.2544.1.12.11.1.6 no-access
User managed IPv6 Address Table.
               cmIpv6InterfaceEntry 1.3.6.1.4.1.2544.1.12.11.1.6.1 no-access
Allows management of IPv6 Interfaces.
                   cmIpv6InterfaceMTU 1.3.6.1.4.1.2544.1.12.11.1.6.1.1 integer32 read-write
This object describe the MTU for ipv6 address interface.
                   cmIpv6UnicastAddr 1.3.6.1.4.1.2544.1.12.11.1.6.1.2 ipv6address read-write
This object describe IPv6 Unicast Address together with Prefix.
                   cmIpv6UnicastAddrPrefixLen 1.3.6.1.4.1.2544.1.12.11.1.6.1.3 integer32 read-write
This object describe prefix length of unicast address.
                   cmIpv6PrefixAdvertiseEnabled 1.3.6.1.4.1.2544.1.12.11.1.6.1.4 truthvalue read-write
This object describe whether to advertise prefix to link in router mode.
                   cmIpv6RAPrefix 1.3.6.1.4.1.2544.1.12.11.1.6.1.5 ipv6address read-write
This object describe the IPv6 Prefix to be dispatched to link in Router mode.
                   cmIpv6RAPrefixLength 1.3.6.1.4.1.2544.1.12.11.1.6.1.6 integer32 read-write
This object describe Length of RA prefix.
                   cmIpv6StateAddrAutoConfigEnabled 1.3.6.1.4.1.2544.1.12.11.1.6.1.7 truthvalue read-write
This object describe whether enable or disable stateless address auto configuration.
                   cmIpv6DhcpEnabled 1.3.6.1.4.1.2544.1.12.11.1.6.1.8 truthvalue read-write
This object describe whether dhcp is enabled on the ipv6 interface.
                   cmIpv6DhcpRole 1.3.6.1.4.1.2544.1.12.11.1.6.1.9 cmdhcprole read-write
This object describe the dhcp role.
                   cmIpv6RIPngEnabled 1.3.6.1.4.1.2544.1.12.11.1.6.1.10 truthvalue read-write
This object describe RIPng whether enabled.
                   cmIpv6LinkLocAddr 1.3.6.1.4.1.2544.1.12.11.1.6.1.11 ipv6address read-only
This object describe Automatically generated Link-local Address.
                   cmIpv6LinkLocAddrPrefixLen 1.3.6.1.4.1.2544.1.12.11.1.6.1.12 integer32 read-only
This object describe Length of link local IPv6 address prefix.
                   cmIpv6InterfaceGateway 1.3.6.1.4.1.2544.1.12.11.1.6.1.13 ipv6address read-write
This object describes the IPv6 Gateway address for the management interface on OSA540X.
           cmIpv6StaticRouteTable 1.3.6.1.4.1.2544.1.12.11.1.7 no-access
This entity's user configured Static Ipv6 Routing table.
               cmIpv6StaticRouteEntry 1.3.6.1.4.1.2544.1.12.11.1.7.1 no-access
A particular route to a particular destina- tion, under a particular policy.
                   cmIpv6StaticRouteDest 1.3.6.1.4.1.2544.1.12.11.1.7.1.1 ipv6address no-access
The destination Ipv6 address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the cmIpv6StaticRouteMask object is not equal to x.
                   cmIpv6StaticRoutePrefixLen 1.3.6.1.4.1.2544.1.12.11.1.7.1.2 integer32 no-access
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the cmIpv6StaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the cmIpv6StaticRoutePrefixLen by reference to the IP Ad- dress Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the cmIpv6StaticRouteDest object is not equal to cmIpv6StaticRouteDest.
                   cmIpv6StaticRouteNextHop 1.3.6.1.4.1.2544.1.12.11.1.7.1.3 ipv6address no-access
On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.
                   cmIpv6StaticRouteMetric 1.3.6.1.4.1.2544.1.12.11.1.7.1.4 integer32 read-only
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's cmIpv6StaticRouteProto value. If this metric is not used, its value should be set to 1.
                   cmIpv6StaticRouteRowStatus 1.3.6.1.4.1.2544.1.12.11.1.7.1.5 rowstatus read-only
The row status variable, used according to row installation and removal conventions.
                   cmIpv6StaticRouteInterface 1.3.6.1.4.1.2544.1.12.11.1.7.1.6 displaystring no-access
Name of the Ipv6 interface for the interface static route.
                   cmIpv6StaticRouteAdvertise 1.3.6.1.4.1.2544.1.12.11.1.7.1.7 truthvalue read-only
Whether this static route will be advertised via routing protocol.
           cmNDPTable 1.3.6.1.4.1.2544.1.12.11.1.8 no-access
A list of NDP entries on the NIDs.
               cmNDPEntry 1.3.6.1.4.1.2544.1.12.11.1.8.1 no-access
A conceptual row in the cmNDPTable. Entries can be created/deleted in this table by management application action.
                   cmNDPIpv6Address 1.3.6.1.4.1.2544.1.12.11.1.8.1.1 ipv6address no-access
This object allows configuration of the NDP Entry IP Address.
                   cmNDPMacAddress 1.3.6.1.4.1.2544.1.12.11.1.8.1.2 macaddress read-only
This object allows management of the NDP Entry MAC Address.
                   cmNDPInterface 1.3.6.1.4.1.2544.1.12.11.1.8.1.3 displaystring no-access
This object allows management of the NDP Entry Interface.
                   cmNDPStorageType 1.3.6.1.4.1.2544.1.12.11.1.8.1.4 storagetype read-only
The type of storage configured for this entry.
                   cmNDPRowStatus 1.3.6.1.4.1.2544.1.12.11.1.8.1.5 rowstatus read-write
The status of this row. The cmNDPRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3).
                   cmNDPEntryType 1.3.6.1.4.1.2544.1.12.11.1.8.1.6 ipentrytype read-write
The type of NDP Entry. Note that static entries can be created.
           cmProxyNDPTable 1.3.6.1.4.1.2544.1.12.11.1.9 no-access
A list of Proxy NDP entries on the NIDs. This table is not supported in GE206 Release 4.1CC.
               cmProxyNDPEntry 1.3.6.1.4.1.2544.1.12.11.1.9.1 no-access
A conceptual row in the cmProxyNDPTable. Entries can be created/deleted in this table by management application action.
                   cmProxyNDPIpv6Address 1.3.6.1.4.1.2544.1.12.11.1.9.1.1 ipv6address no-access
This object allows configuration of the ProxyNDP Entry IP Address.
                   cmProxyNDPIpv6PrefixLen 1.3.6.1.4.1.2544.1.12.11.1.9.1.2 integer32 no-access
This object allows management of the Proxy NDP Entry Subnet Mask.
                   cmProxyNDPInterface 1.3.6.1.4.1.2544.1.12.11.1.9.1.3 displaystring read-only
This object allows management of the Proxy NDP Entry Interface.
                   cmProxyNDPStorageType 1.3.6.1.4.1.2544.1.12.11.1.9.1.4 storagetype read-only
The type of storage configured for this entry.
                   cmProxyNDPRowStatus 1.3.6.1.4.1.2544.1.12.11.1.9.1.5 rowstatus read-write
The status of this row. The cmProxyNDPRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3).
           cmIpv6OverIpv4TunnelTable 1.3.6.1.4.1.2544.1.12.11.1.10 no-access
A list of Ipv6OverIpv4Tunnel entries on the NIDs.
                 cmIpv6OverIpv4TunnelEntry 1.3.6.1.4.1.2544.1.12.11.1.10.1 no-access
A conceptual row in the cmIpv6OverIpv4TunnelTable. Entries can be created/deleted in this table by management application action.
                     cmIpv6OverIpv4TunnelIndex 1.3.6.1.4.1.2544.1.12.11.1.10.1.1 integer32 no-access
An integer index value used to uniquely identify this Ipv6OverIpv4TunnelEntry in the cmIpv6OverIpv4TunnelTable.
                     cmIpv6OverIpv4TunnelName 1.3.6.1.4.1.2544.1.12.11.1.10.1.2 displaystring read-write
This object describe the tunnel name.
                     cmIpv6OverIpv4TunnelType 1.3.6.1.4.1.2544.1.12.11.1.10.1.3 ipv6overipv4tunneltype read-write
This object describe the tunnel type.
                     cmIpv6OverIpv4TunnelDestIpv4Addr 1.3.6.1.4.1.2544.1.12.11.1.10.1.4 ipaddress read-write
This object describe Destination IPv4 address. Only applicable for configured tunnel.
                     cmIpv6OverIpv4TunnelIpv6UnicastAddress 1.3.6.1.4.1.2544.1.12.11.1.10.1.5 ipv6address read-write
This object describe Source IPv6 address used to transmit IPv6 packets on tunnel. Only writable for Configured Tunnel, read-only for other types of Tunnels.
                     cmIpv6OverIpv4TunnelIpv6UnicastAddrPrefixLen 1.3.6.1.4.1.2544.1.12.11.1.10.1.6 integer32 read-write
This object describe the prefix length for the unicast ipv6 address.
                     cmIpv6OverIpv4TunnelLinkLocalAddress 1.3.6.1.4.1.2544.1.12.11.1.10.1.7 ipv6address read-only
This object describe the link local adderss.
                     cmIpv60verIpv4TunnelLinkLocalAddrPrefixLen 1.3.6.1.4.1.2544.1.12.11.1.10.1.8 integer32 read-only
This object describe the prefix length for link local address.
                     cmIpv6OverIpv4TunnelAssociatedIpv4Interface 1.3.6.1.4.1.2544.1.12.11.1.10.1.9 variablepointer read-write
the IPv4 Interface that Tunnel is created on, which could be DCN or Management tunnel.
                     cmIpv6OverIpv4TunnelStorageType 1.3.6.1.4.1.2544.1.12.11.1.10.1.10 storagetype read-only
The type of storage configured for this entry.
                     cmIpv6OverIpv4TunnelRowStatus 1.3.6.1.4.1.2544.1.12.11.1.10.1.11 rowstatus read-write
The status of this row. The cmIpv6OverIpv4TunnelRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3).
                     cmIpv6OverIpv4PotentialRouterList 1.3.6.1.4.1.2544.1.12.11.1.10.1.12 displaystring read-only
This object describe the potential router list. And its format should be like 'a.b.c.d,e.f.g.h', split by ',' and no breakspace there.
           ipLoopbackInterfaceTable 1.3.6.1.4.1.2544.1.12.11.1.11 no-access
A list of loopback interace entries in the management plane.
                 ipLoopbackInterfaceEntry 1.3.6.1.4.1.2544.1.12.11.1.11.1 no-access
A conceptual row in the ipLoopbackInterfaceTable. Entries can be created/deleted in this table by management application action.
                     ipLoopbackInterfaceIndex 1.3.6.1.4.1.2544.1.12.11.1.11.1.1 integer32 no-access
A unique integer index value used to uniquely identify a Loopback Interface Entry in the ipLoopbackInterfaceTable.
                     ipLoopbackInterfaceName 1.3.6.1.4.1.2544.1.12.11.1.11.1.2 displaystring read-only
This allows specification of a unique name which is also used as the name of the IP interface.
                     ipLoopbackInterfaceIpAddress 1.3.6.1.4.1.2544.1.12.11.1.11.1.3 ipaddress read-write
This object allows user to specify the IP Address of the interface.
                     ipLoopbackInterfaceMask 1.3.6.1.4.1.2544.1.12.11.1.11.1.4 ipaddress read-write
This object allows user to specify the IP mask of the interface.
                     ipLoopbackInterfaceStorageType 1.3.6.1.4.1.2544.1.12.11.1.11.1.5 storagetype read-only
The type of storage configured for this entry.
                     ipLoopbackInterfaceRowStatus 1.3.6.1.4.1.2544.1.12.11.1.11.1.6 rowstatus read-write
The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of ipLoopbackInterfaceRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with ipLoopbackInterfaceRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The ipLoopbackInterfaceRowStatus object may be modified if the associated instance of this object is equal to active(1).
                     ipLoopbackInterfaceIpMode 1.3.6.1.4.1.2544.1.12.11.1.11.1.7 ipmode read-write
This object means the ip mode for the interface.
                     ipLoopbackInterfaceIpv6Address 1.3.6.1.4.1.2544.1.12.11.1.11.1.8 ipv6address read-write
This object means the ipv6 address for the interface.
                     ipLoopbackInterfaceIpv6AddrPrefixLen 1.3.6.1.4.1.2544.1.12.11.1.11.1.9 integer32 read-write
This object means the ipv6 address prefix length for the interface.
       cmIpConformance 1.3.6.1.4.1.2544.1.12.11.2
           ipCompliances 1.3.6.1.4.1.2544.1.12.11.2.1
               ipCompliance 1.3.6.1.4.1.2544.1.12.11.2.1.1
Describes the requirements for compliance to the IP Module.
           ipGroups 1.3.6.1.4.1.2544.1.12.11.2.2
               ipGroup 1.3.6.1.4.1.2544.1.12.11.2.2.1
A collection of objects used to manage the FSP150CM IP Services.
               ipv6Group 1.3.6.1.4.1.2544.1.12.11.2.2.2
A collection of objects used to manage the FSP150CM IPv6 Services.
       cmIpScalars 1.3.6.1.4.1.2544.1.12.11.3
           cmIpSystemScalars 1.3.6.1.4.1.2544.1.12.11.3.1
               cmIpFlushARPCacheAction 1.3.6.1.4.1.2544.1.12.11.3.1.1 ipactiontype read-write
This object allows user to initiate Flush ARP action.
               cmIpProxyARPEnabled 1.3.6.1.4.1.2544.1.12.11.3.1.2 truthvalue read-write
This object allows user to enable/disable Proxy ARP.
               cmIpPingDestination 1.3.6.1.4.1.2544.1.12.11.3.1.3 ipaddress read-write
This object allows user to specify the IP Address to which ICMP Ping will be initiated.
               cmIpInitiatePingAction 1.3.6.1.4.1.2544.1.12.11.3.1.4 ipactiontype read-write
This object allows user to initiate ICMP Ping on cmIpPingDestination.
               cmIpPingResult 1.3.6.1.4.1.2544.1.12.11.3.1.5 displaystring read-only
This object provides the results of a previous ICMP Ping Action.
               cmIpTraceRouteDestination 1.3.6.1.4.1.2544.1.12.11.3.1.6 ipaddress read-write
This object allows user to specify the IP Address to which Trace Route will be initiated.
               cmIpInitiateTraceRouteAction 1.3.6.1.4.1.2544.1.12.11.3.1.7 ipactiontype read-write
This object allows user to initiate TraceRoute on cmIpTraceRouteDestination.
               cmIpTraceRouteResult 1.3.6.1.4.1.2544.1.12.11.3.1.8 displaystring read-only
This object provides the results of a previous TraceRoute Action.
               cmIpManagementTrafficBridgingEnabled 1.3.6.1.4.1.2544.1.12.11.3.1.9 truthvalue read-write
This object allows the user to control the IP Management Traffic Bridging feature. When enabled, the system is managed using the IP address specified at the Management LAN port. All IP packets that are not terminated at the node will be bridged over the Management LAN.
               cmIpManagementTrafficBridgingSecurityEnabled 1.3.6.1.4.1.2544.1.12.11.3.1.10 truthvalue read-write
This object allows the user to control the IP Management Traffic Bridging feature's security. When enables, the system supports a secure Management Traffic Bridge.
               cmIpv6PingInterface 1.3.6.1.4.1.2544.1.12.11.3.1.11 displaystring read-write
This object allows user to specify the IPV6 Address related interface.
               cmIpv6PingDestination 1.3.6.1.4.1.2544.1.12.11.3.1.12 ipv6address read-write
This object allows user to specify the IPV6 Address to which ICMP Ping will be initiated.
               cmIpv6InitiatePingAction 1.3.6.1.4.1.2544.1.12.11.3.1.13 ipactiontype read-write
This object allows user to initiate ICMP Ping on cmIpv6PingDestination.
               cmIpv6TraceRouteDestination 1.3.6.1.4.1.2544.1.12.11.3.1.14 ipv6address read-write
This object allows user to specify the IPV6 Address to which Trace Route will be initiated.
               cmIpv6InitiateTraceRouteAction 1.3.6.1.4.1.2544.1.12.11.3.1.15 ipactiontype read-write
This object allows user to initiate TraceRoute on cmIpv6TraceRouteDestination.
               cmIpv6ProxyNDPEnabled 1.3.6.1.4.1.2544.1.12.11.3.1.16 truthvalue read-write
This object whether enabled proxy NDP.
               cmIpv6FwdEnabled 1.3.6.1.4.1.2544.1.12.11.3.1.17 truthvalue read-write
This object whether NE works in router mode or host mode. Forwarding enable:router mode, forwarding disable: host mode.
               cmIpFlushNDPCacheAction 1.3.6.1.4.1.2544.1.12.11.3.1.18 ipactiontype read-write
This object allows user to initiate Flush NDP action.
               cmIpPtpArpRtrvAction 1.3.6.1.4.1.2544.1.12.11.3.1.19 ptparpactiontype read-write
If user want to get PTP arp from cmARPEntry, user need to configure this object first.
               cmIpManagementTrafficDscpEnabled 1.3.6.1.4.1.2544.1.12.11.3.1.20 truthvalue read-write
This object controls whether the DSCP value is modified for the transmitted management traffic whether it is locally generated or routed.
               cmIpManagementTrafficDscp 1.3.6.1.4.1.2544.1.12.11.3.1.21 unsigned32 read-write
This object specifies the DSCP value and it is applicable when cmIpManagementTrafficDscpEnabled is enabled.
               cmIpManagementTrafficBridgingInterface 1.3.6.1.4.1.2544.1.12.11.3.1.22 displaystring read-write
This object allows the user to specify the name of the IP interface the IP address of which shall be used as the IP address of the Management Bridge.
               cmIpManagementTrafficBridgingIpv4Gateway 1.3.6.1.4.1.2544.1.12.11.3.1.23 ipaddress read-write
This object allows the user to specify the IPv4 default gateway for the Management Bridge.
               cmIpManagementTrafficBridgingIpv6Gateway 1.3.6.1.4.1.2544.1.12.11.3.1.24 ipv6address read-write
This object allows the user to specify the IPv6 default gateway for the Management Bridge.
               cmPingInterface 1.3.6.1.4.1.2544.1.12.11.3.1.25 displaystring read-write
This object allows user to specify the IPV4 Address related interface.
               cmIpTraceRouteInterface 1.3.6.1.4.1.2544.1.12.11.3.1.26 displaystring read-write
This object allows user to specify the IPV4 Address related interface.
               cmIpv6TraceRouteInterface 1.3.6.1.4.1.2544.1.12.11.3.1.27 displaystring read-write
This object allows user to specify the IPV6 Address related interface.
           cmIpSourceAddrScalars 1.3.6.1.4.1.2544.1.12.11.3.2
               cmIpSNMPv1InterfaceName 1.3.6.1.4.1.2544.1.12.11.3.2.1 displaystring read-write
This object allows the user to specify the IP interface name, which will be used in the SNMPv1 TRAP PDUs as the Agent's IP Address.
               cmIpSourceAddressType 1.3.6.1.4.1.2544.1.12.11.3.2.2 ipsourceaddrtype read-write
This object allows the user to specify whether the System IP Address or the Outgoing IP Interface's Address should be used in outgoing IP PDUs.
               cmIpSourceAddressInterfaceName 1.3.6.1.4.1.2544.1.12.11.3.2.3 displaystring read-write
This object allows the user to specify the IP interface name when cmIpSourceAddressType is 'systemipaddr'. The IP Address associated with the IP interface name is set as the source IP Address in outgoing PDUs.