ELTEX-FLEX-LINKS-MIB: View SNMP OID List / Download MIB

VENDOR: ELTEX ENTERPRISE


 Home MIB: ELTEX-FLEX-LINKS-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, ELTEX-SMI-ACTUAL, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 eltexFlexLinksMIB 1.3.6.1.4.1.35265.31
This MIB module is for configuration and status query of Flex Links feature on the Eltex device. Flex Links are a pair of Layer 2 interfaces, where one interface is configured to act as a backup to the other. The feature provides an alternative solution to the Spanning Tree Protocol (STP), allowing users to turn off STP and still provide basic link redundancy. Flex Links are typically configured in service provider or enterprise networks where users do not want to run STP on the device.
       eltexFlexLinksMIBNotifs 1.3.6.1.4.1.35265.31.0
           eltexFlIfStatusChangeNotif 1.3.6.1.4.1.35265.31.0.1
A eltexFlIfStatusChangeNotif is generated when the value of eltexFlIfStatus changes.
       eltexFlexLinksMIBObjects 1.3.6.1.4.1.35265.31.1
           eltexFlConfig 1.3.6.1.4.1.35265.31.1.1
               eltexFlIfConfigTable 1.3.6.1.4.1.35265.31.1.1.1 no-access
This table allows user to configure Flex Links. The Flex Links feature requires interface pairs to be setup. This table allows user to specify such interface pairs. An interface can become part of only one such interface pair at any given time.
                   eltexFlIfConfigEntry 1.3.6.1.4.1.35265.31.1.1.1.1 no-access
An entry containing information about Flex Links configuration. Each entry configures a pair of interfaces for a Flex Links. Only those Layer 2 interfaces which are capable of performing Flex Links operation may be configured in this table. Once an interface is configured as part of a Flex Links pair, such an interface, can not be configured as a part of other Flex Links pairs.
                       eltexFlIfConfigPrimary 1.3.6.1.4.1.35265.31.1.1.1.1.1 interfaceindex no-access
The object indicates the primary interface in this Flex Links pair.
                       eltexFlIfConfigBackUp 1.3.6.1.4.1.35265.31.1.1.1.1.2 interfaceindexorzero read-only
The object indicates the back up interface in this Flex Links pair. The value of this object is changed to 0 (zero) if this interface is removed from the ifTable. The SNMP agent is responsible for updating this object's value once the interface is added to the ifTable. The value of 0 (zero) cannot be set.
               eltexFlEnableStatusChangeNotif 1.3.6.1.4.1.35265.31.1.1.2 truthvalue read-write
This variable indicates whether the system produces the eltexFlIfStatusChangeNotif. A value of 'false' will prevent eltexFlIfStatusChangeNotif.
               eltexFlIfConfigExtTable 1.3.6.1.4.1.35265.31.1.1.3 no-access
This table contains management information, such as of MAC address-table Move Update(MMU), preemption mechanism, VLAN load balancing of Flex Links pair, of interfaces which are capable of supporting these features.
                   eltexFlIfConfigExtEntry 1.3.6.1.4.1.35265.31.1.1.3.1 no-access
An entry containing Flex Links management information for a particular interface.
                       eltexFlIfConfigPreemptionMode 1.3.6.1.4.1.35265.31.1.1.3.1.1 integer read-write
The object specifies the preemption mechanism for a Flex Link interface pair. off - No preemption happens from active interface to backup interface. forced - The active interface always preempts the backup interface. The preemption occurs after the time specified in eltexFlIfConfigPreemptionDelay. bandwidth - The interface with higher bandwidth always acts as the active interface. Enumeration: 'forced': 2, 'bandwidth': 3, 'off': 1.
                       eltexFlIfConfigPreemptionDelay 1.3.6.1.4.1.35265.31.1.1.3.1.2 unsigned32 read-write
The object specifies the delay time until an interface preempts another interface for a Flex Link interface pair.
           eltexFlStatus 1.3.6.1.4.1.35265.31.1.2
               eltexFlIfStatusTable 1.3.6.1.4.1.35265.31.1.2.1 no-access
A list of interfaces which are members of Flex Links.
                   eltexFlIfStatusEntry 1.3.6.1.4.1.35265.31.1.2.1.1 no-access
An entry, containing status information about a Flex Links interface. Entry is created when an interface is configured as a member of a Flex Links. When an entry is created in the eltexFlIfConfigTable, entries corresponding to eltexFlIfConfigPrimary and eltexFlIfConfigBackUp are created in this table. Entry is deleted when an interface is removed from a Flex Links. When an entry is removed from the eltexFlIfConfigTable, entries corresponding to eltexFlIfConfigPrimary and eltexFlIfConfigBackUp are deleted from this table.
                       eltexFlIfIndex 1.3.6.1.4.1.35265.31.1.2.1.1.1 interfaceindex read-only
The index value which uniquely identifies the interface to which this entry is applicable. eltexFlIfIndex is the same as the ifIndex of the interface associated with a Flex Links.
                       eltexFlIfStatus 1.3.6.1.4.1.35265.31.1.2.1.1.2 integer read-only
The status of an interface which is participating in Flex Links operation. A value of 'forwarding' indicates that, the interface is participating in Flex Links operation and is actively forwarding traffic. A value of 'blocking' indicates that, interface is participating in Flex Links operation and is ready to forward traffic if the interface it backs up in Flex Links operation goes down. A value of 'down' indicates that, the interface participating in Flex Links operation has gone down. A value of 'unknown' indicates that, the interface is participating Flex Links operation and has entered an unknown state. Enumeration: 'down': 3, 'unknown': 4, 'forwarding': 1, 'blocking': 2.
       eltexFlexLinksMIBConformance 1.3.6.1.4.1.35265.31.2
           eltexFlexLinksMIBCompliances 1.3.6.1.4.1.35265.31.2.1
               eltexFlexLinksMIBCompliance 1.3.6.1.4.1.35265.31.2.1.1
The compliance statement for entities which implement the ELTEX-FLEX-LINKS-MIB.
           eltexFlexLinksMIBGroups 1.3.6.1.4.1.35265.31.2.2
               eltexFlexLinksIfConfigGroup 1.3.6.1.4.1.35265.31.2.2.1
A collection of objects providing interface configuration information for Flex Links.
               eltexFlexLinksIfStatusGroup 1.3.6.1.4.1.35265.31.2.2.2
A collection of objects providing interface status information for Flex Links.
               eltexFlexLinksEnableNotifGroup 1.3.6.1.4.1.35265.31.2.2.3
A collection of objects providing enabling/disabling of the status change notifications for Flex Links.
               eltexFlexLinksNotifGroup 1.3.6.1.4.1.35265.31.2.2.4
A collection of notifications providing the status change for Flex Links.
               eltexFlexLinksPreemptionGroup 1.3.6.1.4.1.35265.31.2.2.5
A collection of objects providing interface preemption information of Flex Links.