Dell-POLICY-MIB: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: Dell-POLICY-MIB
Download as:   
DIFF-SERV-MIB, SNMPv2-CONF, SNMPv2-TC, IF-MIB, Dell-MIB, SNMPv2-SMI, Q-BRIDGE-MIB, Dell-BRIDGEMIBOBJECTS-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rlPolicy 1.3.6.1.4.1.89.59
The private MIB module definition generic traffic policy in Dell devices.
       rlPolicyMibVersion 1.3.6.1.4.1.89.59.1 integer read-only
MIB's version, the current version is 14 1 - original version 2 - two new fields rlPolicyActionChangeDscpNonConform rlPolicyActionNewDscpNonConform were added. 3 - added support new policy features QoS modes: basic and advanced support for trusted mode operations mapping tables for trusted ports dscp, tcpUdp, mutation, remarking. 4 - I) added support to service mode. II)DSCP to VPT mapping table III) download marker 5 - Added cos-Dscp to RlPolicyTrustTypes 6 - Added rlPolicyFlowClassificationOffsetsGroupUseVPTId and rlPolicyFlowClassificationOffsetsGroupUseEtherTypeId To rlPolicyFlowClassificationOffsetsTable Added rlPolicyClassifierVPTID And rlPolicyClassifierEtherTypeID To rlPolicyClassifierTable Added Vpt and Ethertype support to rlPolicyClassifierAdditionalCriteriaSupported 7 - Added rlPolicyPortCfgPortRateLimitStatus,rlPolicyPortCfgCirPortRateLimit rlPolicyPortCfgCbsPortRateLimit to rlPolicyPortConfigurationTable 8 - Added rlPolicyDefaultForwardingProtocol to rlPolicyDefaultForwardingTable Added rlPolicyDscpToDpTable 9 - Add statistics 10 - Add classifier utilization 11 -Added rlPolicyFlowClassificationOffsetsGroupUseInnerVlanId To rlPolicyFlowClassificationOffsetsTable Added rlPolicyClassifierInnerVID To rlPolicyClassifierTable Added Inner vlan id support to rlPolicyClassifierAdditionalCriteriaSupported 12 - Added rlPolicyVlanConfigurationTable 13 - Added rlPolicyIsTCAvailable scalar 14 - Added rlPolicyCPUSafeGuardEnable
       rlPolicyClassifier 1.3.6.1.4.1.89.59.2
           rlPolicyClassifierPlatDependParams 1.3.6.1.4.1.89.59.2.1
               rlPolicyFlowClassificationOffsetsGroupScheme 1.3.6.1.4.1.89.59.2.1.1 integer read-only
Some platforms allow Policy statements to examine all packet offsets(Opal); other platforms require specification of specific byte offsets for routedIp packets, another set of offsets for routedIpx, a third set for bridge. Enumeration: 'allOffsetsPermitted': 1, 'singleFlowClassificationOffsetGroupsForIpIpxBridge': 2.
               rlPolicyNumberOfOffsetsPerFlowClassificationOffsetGroup 1.3.6.1.4.1.89.59.2.1.2 integer read-only
For platforms which require an FCOG, indicates the maximum number of byte offsets specifiable for each offset group.
               rlPolicyFlowClassificationOffsetGroupMaximumOffset 1.3.6.1.4.1.89.59.2.1.3 integer read-only
Indicates the maximum value of a byte offset in a Flow Classification Offset Group. If 0, there is no limit.
               rlPolicyNumberOfOffsetsPerOmpcGroup 1.3.6.1.4.1.89.59.2.1.4 integer read-only
indicates the maximum number of byte offsets specifiable for each Ompc offset group.
               rlPolicyOmpcMaximumOffset 1.3.6.1.4.1.89.59.2.1.5 integer read-only
Indicates the maximum value of a byte offset in a Ompc Group. If 0, there is no limit.
               rlPolicyOMPCPermittedOperators 1.3.6.1.4.1.89.59.2.1.6 octet string read-only
A bit mask indicating which operators are permissable in an OMPC: ---------- |87654321| ---------- 1 - equal operator permitted 2 - not-equal operator permitted 3 - greater-than operator permitted 4 - less-than operator permitted
               rlPolicyMaxOMPCLengthForBiggerSmallerOperation 1.3.6.1.4.1.89.59.2.1.7 integer read-only
Indicates the maximal permissible length of an OMPC using bigger' or 'smaller' condition. If 0, there is no limit.
               rlPolicyClassifierAdditionalCriteriaSupported 1.3.6.1.4.1.89.59.2.1.8 octet string read-only
A bit mask indicating which additional Criteria may be supported by the classifier: ---------- |87654321| ---------- 1 - input port supported 2 - output port supported 3 - VLAN ID for bridging supported 4 - VPT ID for bridging supported 5 - EtherType ID for bridging supported 6 - Inner VLAN ID for bridging supported
               rlPolicyClassifierAdditionalCriteriaUsedInOffsetCount 1.3.6.1.4.1.89.59.2.1.9 truthvalue read-only
Indicates whether the additional FCOG or Classifier criteria (ie. inPort, outPort VID count towards the maximum number of offsets ie. whether using inPort in the FCOG reduces the maximum number of offsets available.
               rlPolicyClassifierPermittedOffsetTypes 1.3.6.1.4.1.89.59.2.1.10 octet string read-only
A bit mask indicating which offset types are supported by the platform for FCOG and OMPC definitions: ---------- |87654321| ---------- 1 - L2 offsets supported 2 - L3 offsets supported
               rlPolicyClassifierOMPCActions 1.3.6.1.4.1.89.59.2.1.11 octet string read-only
A bit mask indicating which operation could be performed with OPMC ---------- |87654321| ---------- 1 - equal, 2 - notEqual, 3 - bigger, 4 - smaller.
           rlPolicyFlowClassificationOffsetsTable 1.3.6.1.4.1.89.59.2.2 no-access
Specifies the byte offsets that the platform can use for policy decisions. This table is used for platforms which impose limitations on choosing the OMPCs for classification. If the platform does not impose any limitations, the value of rlPolicyFlowClassificationOffsetsGroupScheme is allOffsetsPermitted. Each entry in the table specifies a combination of byte offsets which can be used to specify flow classification. A rule may use a subset of the bytes of its Offset Group. The maximum value for each offset is given by rlPolicyFlowClassificationOffsetGroupMaximumOffset. The maximum number of offsets per Offset Group is given by rlPolicyNumberOfOffsetsPerFlowClassificationOffsetGroup.
               rlPolicyFlowClassificationOffsetsGroupEntry 1.3.6.1.4.1.89.59.2.2.1 no-access
The flow classification offset table entry includes the following parameters
                   rlPolicyFlowClassificationOffsetsGroupType 1.3.6.1.4.1.89.59.2.2.1.1 rlpolicygrouptype read-only
Specifies a classifier type for which offset bytes can be specified.
                   rlPolicyFlowClassificationOffsetsGroupOffset 1.3.6.1.4.1.89.59.2.2.1.2 object identifier read-write
The list of offsets to be included in the Flow Classification Offset Group are specified as subidentifiers in the OID(after the first 2 bytes which must be 1.1). The maximal number of permissible offsets is given by rlPolicyNumberOfOffsetsPerFlowClassificationOffsetGroup. The maximal value that an offset can have is rlPolicyFlowClassificationOffsetGroupMaximumOffset.
                   rlPolicyFlowClassificationOffsetsGroupOffsetType 1.3.6.1.4.1.89.59.2.2.1.3 object identifier read-write
Indicates whether the corresponding byte denotes an offset from beginning of L2, from the beginning of L3 IPv4 packet data or from the beginning of L3 IPv6 packet data. Each byte in the OID contains either: (1) - L2 offset (2) - L3 Offset (3) - L3 IPv6 Offset
                   rlPolicyFlowClassificationOffsetsGroupMask 1.3.6.1.4.1.89.59.2.2.1.4 octet string read-write
The list of masks corresponding to the offsets to be included in the Flow Classification Offset Group are specified as bytes in the OID(after the first 2 bytes which must be 1.1).
                   rlPolicyFlowClassificationOffsetsGroupUseInputInterface 1.3.6.1.4.1.89.59.2.2.1.5 truthvalue read-write
Indicates whether or not the Input Interface Index is usable in Policy Rule definitions.
                   rlPolicyFlowClassificationOffsetsGroupUseOutputInterface 1.3.6.1.4.1.89.59.2.2.1.6 truthvalue read-write
Indicates whether or not the Output Interface Index(ie. routing/bridging decision) is usable in Policy Rule definitions
                   rlPolicyFlowClassificationOffsetsGroupUseVlanId 1.3.6.1.4.1.89.59.2.2.1.7 truthvalue read-write
Indicates whether or not the VlanId is usable in Policy Rule definitions for bridged packets
                   rlPolicyFlowClassificationOffsetsGroupStatus 1.3.6.1.4.1.89.59.2.2.1.8 rowstatus read-write
The status of a table entry. It is used to delete an entry from this table.
                   rlPolicyFlowClassificationOffsetsGroupUseVPTId 1.3.6.1.4.1.89.59.2.2.1.9 truthvalue read-write
Indicates whether or not the VPT is usable in Policy Rule definitions for bridged packets
                   rlPolicyFlowClassificationOffsetsGroupUseEtherTypeId 1.3.6.1.4.1.89.59.2.2.1.10 truthvalue read-write
Indicates whether or not the EtherType is usable in Policy Rule definitions for bridged packets
                   rlPolicyFlowClassificationOffsetsGroupUseInnerVlanId 1.3.6.1.4.1.89.59.2.2.1.11 truthvalue read-write
Indicates whether or not the inner VlanId is usable in Policy Rule definitions for bridged packets
           rlPolicyOMPCTable 1.3.6.1.4.1.89.59.2.3 no-access
The table of OMPC statements.
               rlPolicyOMPCEntry 1.3.6.1.4.1.89.59.2.3.1 no-access
Each classification statement consists of the following parameters
                   rlPolicyOMPCGroupType 1.3.6.1.4.1.89.59.2.3.1.1 rlpolicygrouptype read-only
Specifies a classifier type for which offset bytes can be specified.
                   rlPolicyOMPCIndex 1.3.6.1.4.1.89.59.2.3.1.2 integer read-only
Index into the OMPC Table.
                   rlPolicyOMPCOffset 1.3.6.1.4.1.89.59.2.3.1.3 integer read-write
Specifies the offset within the frame (in bytes) from the layer according to rlPolicyGroupType. The limitation of this field is according to the rlPolicyFlowClassificationOffsetGroupMaximumOffset parameter if this OMPC is used by an entry in the rlPolicyClassifierTable whose rlPolicyClassifierType is a protocol for which predefined offsets in rlPolicyFlowClassificationOffsetsTable are required. rlPolicyRequiredOffsetGroups indicates for which protocols there is such a requirement.
                   rlPolicyOMPCOffsetType 1.3.6.1.4.1.89.59.2.3.1.4 integer read-write
Indicates whether the offset should be interpreted as relative to the beginning of L2 or the beginning of L3 Enumeration: 'l3-ipv6': 3, 'l2': 1, 'l3': 2.
                   rlPolicyOMPCMask 1.3.6.1.4.1.89.59.2.3.1.5 octet string read-write
Specifies which bits of the rlPolicyOMPCPattern field are significant for packet comparison. The length of the mask, in case of 'bigger' or 'smaller' rlPolicyOMPCCondition, is limited by rlPolicyMaxOMPCLengthForBiggerSmallerOperation.
                   rlPolicyOMPCPattern 1.3.6.1.4.1.89.59.2.3.1.6 octet string read-write
Describes the mask field. The length of this object must be equal to the length of rlPolicyOMPCMask.
                   rlPolicyOMPCCondition 1.3.6.1.4.1.89.59.2.3.1.7 integer read-write
These define the operation carried out on the two 'operands' (frame and pattern), i.e. Bigger means that frame bits should be bigger than pattern bits. The permitted values are according to rlPolicyOMPCPermittedOperators parameter, if this OMPC is used by an entry in the rlPolicyClassifierTable whose rlPolicyClassifierType is a protocol for which predefined offsets in rlPolicyFlowClassificationOffsetsTable are required. rlPolicyRequiredOffsetGroups indicates for which protocols there is such a requirement. Enumeration: 'notEqual': 2, 'smaller': 4, 'equal': 1, 'bigger': 3.
                   rlPolicyOMPCDescription 1.3.6.1.4.1.89.59.2.3.1.8 displaystring read-write
Free text specifing the nature of this OMPC.
                   rlPolicyOMPCStatus 1.3.6.1.4.1.89.59.2.3.1.9 rowstatus read-write
The status of a table entry. It is used to delete an entry from this table.
           rlPolicyClassifierTable 1.3.6.1.4.1.89.59.2.4 no-access
The table of Classifier statement.
               rlPolicyClassifierEntry 1.3.6.1.4.1.89.59.2.4.1 no-access
Classifiers can be of the ingress, egress, or post-routing phase varieties. Each multifield classification statement consists of the following parameters.
                   rlPolicyClassifierType 1.3.6.1.4.1.89.59.2.4.1.1 rlpolicygrouptype read-only
Specifies a classifier type for which offset bytes can be specified.
                   rlPolicyClassifierListIndex 1.3.6.1.4.1.89.59.2.4.1.2 integer read-only
List Index into the Classifier Table.
                   rlPolicyClassifierSubListIndex 1.3.6.1.4.1.89.59.2.4.1.3 integer read-only
SubList Index into the Classifier Table.
                   rlPolicyClassifierIndex 1.3.6.1.4.1.89.59.2.4.1.4 integer read-only
Index into the Classifier Table.
                   rlPolicyClassifierOmpcList 1.3.6.1.4.1.89.59.2.4.1.5 object identifier read-write
The list of OMPCs to check with this Classifier. Each subidentifier together with rlPolicyClassifierType specify one OMPC.
                   rlPolicyClassifierInIfIndex 1.3.6.1.4.1.89.59.2.4.1.6 interfaceindexorzero read-write
Input interface index to be compared with received packet, a value of 0 denotes that the classifier is applied to all ports.
                   rlPolicyClassifierOutIfIndex 1.3.6.1.4.1.89.59.2.4.1.7 interfaceindexorzero read-write
Output interface index to be compared with sent packet, a value of 0 denotes that the classifier is applied to all ports.
                   rlPolicyClassifierVID 1.3.6.1.4.1.89.59.2.4.1.8 integer read-write
VLAN ID, used only for bridged traffic.
                   rlPolicyClassifierDiffservInIfType 1.3.6.1.4.1.89.59.2.4.1.9 rlpolicyclassifierdiffserviftype read-write
For a classifier used by the Diffserv Rules table. Enables specification of a classifier that should apply to all Diffserv boundary ports or all Diffserv Interior ports. If normal is specified, the rlPolicyClassifierInIfIndex field is used as it is in the non-diffserv case. If allBoundary or allInterior is selected, rlPolicyClassifierInIfIndex is ignored
                   rlPolicyClassifierDiffservOutIfType 1.3.6.1.4.1.89.59.2.4.1.10 rlpolicyclassifierdiffserviftype read-write
For a classifier used by the Diffserv Rules table. Enables specification of a classifier that should apply to outbound traffic on all Diffserv boundary ports or all Diffserv Interior ports. If normal is specified, the rlPolicyClassifierOutIfIndex field is used as it is in the non-diffserv case. If allBoundary or allInterior is selected, rlPolicyClassifierOutIfIndex is ignored
                   rlPolicyClassifierStatus 1.3.6.1.4.1.89.59.2.4.1.11 rowstatus read-write
The status of a table entry. It is used to delete an entry from this table.
                   rlPolicyClassifierInIfIndexList 1.3.6.1.4.1.89.59.2.4.1.12 portlist read-write
allow to define list of ports for the specific classifier for ingress classification. if rlPolicyClassifierInIfIndex equal to zero then the following list should be reffered , if the list is empty we refer to ALL Ports
                   rlPolicyClassifierOutIfIndexList 1.3.6.1.4.1.89.59.2.4.1.13 portlist read-write
allow to define list of ports for the specific classifier for egress classification. if rlPolicyClassifierOutIfIndex equal to zero then the following list should be reffered , if the list is empty we refer to ALL Ports
                   rlPolicyClassifierVPTID 1.3.6.1.4.1.89.59.2.4.1.14 integer read-write
VPT ID - user priority tag to be compared with . 8 is used to indicate not used value for this classifier
                   rlPolicyClassifierVPTIDMask 1.3.6.1.4.1.89.59.2.4.1.15 integer read-write
VPT ID Mask ,mask the user priority field . 0 is the default indicate Mask all compared with any VPT value
                   rlPolicyClassifierEtherTypeID 1.3.6.1.4.1.89.59.2.4.1.16 integer read-write
EtherType ID, to be compared with. 65535 is used to indicate not used value for this classifier 1499 is uded to indicate IPv4 ethertype that is originated from IPv4 ACL with permit/deny any any any 1500 is uded to indicate IPv6 ethertype that is originated from IPv6 ACL with permit/deny any any any
                   rlPolicyClassifierInnerVID 1.3.6.1.4.1.89.59.2.4.1.17 integer read-write
INNER VLAN ID, used only for double tagged traffic.
       rlPolicyRules 1.3.6.1.4.1.89.59.3
           rlPolicyRulesPlatDependParams 1.3.6.1.4.1.89.59.3.1
               rlPolicyDroppedPacketCountSupported 1.3.6.1.4.1.89.59.3.1.1 truthvalue read-only
Indicates whether the dropped packets counter in the rlPolicyRulesTable is supported.
               rlPolicyFilterActionOptions 1.3.6.1.4.1.89.59.3.1.2 octet string read-only
A bit mask indicating which operation could be perform ---------- |87654321| ---------- 1 - block, 2 - blockAndTrap, 3 - permitAndTrap, 4 - permit.
               rlPolicyIngressMeteringSupported 1.3.6.1.4.1.89.59.3.1.3 truthvalue read-only
Specifies whether the platform supports metering in inbound packet rules.
               rlPolicyEgressMeteringSupported 1.3.6.1.4.1.89.59.3.1.4 truthvalue read-only
Specifies whether the platform supports metering on outbound packet rules (for Diffserv).
           rlPolicyRulesTable 1.3.6.1.4.1.89.59.3.2 no-access
The table of rules and Rules statements applied to all incoming traffic at the post-routing phase - ie. both the inPort and outPort are available for classification When Diffserv is not in effect(ie. IPX, bridging, or IP when the global option for Diffserv is off), certain table parameters are not available(see below). The DiffServ option is enabled or disabled by setting rlDiffservModeEnabled.
               rlPolicyRulesEntry 1.3.6.1.4.1.89.59.3.2.1 no-access
Each multifield classification statement consists of the following parameters.
                   rlPolicyRulesTableType 1.3.6.1.4.1.89.59.3.2.1.1 rlpolicygrouptype read-only
Specifies a classifier type for which offset bytes can be specified.
                   rlPolicyRulesInterfaceDirection 1.3.6.1.4.1.89.59.3.2.1.2 integer read-only
Specifies the direction for this entry on the interface. 'inbound' traffic is operated on during receipt, while 'outbound' traffic is operated on prior to transmission. Based on the metering support: inbound available while the ingress metering supported, outbound available while egress metering supported, and none while no metering supported. Enumeration: 'inbound': 1, 'none': 3, 'outbound': 2.
                   rlPolicyRulesListIndex 1.3.6.1.4.1.89.59.3.2.1.3 integer read-only
Enumerates the rule list entry.
                   rlPolicyRulesSubListIndex 1.3.6.1.4.1.89.59.3.2.1.4 integer read-only
Enumerates the rule sub-list entry.
                   rlPolicyRulesIndex 1.3.6.1.4.1.89.59.3.2.1.5 integer read-only
Enumerates the rule index entry.
                   rlPolicyRulesFilteringAction 1.3.6.1.4.1.89.59.3.2.1.6 integer read-write
Specifies the action for the filter. Values 1-10 reserved for the System filtering implemetation; Values starting from 11 may be used for user definition about future application. Enumeration: 'blockTrapAndDisablePort': 6, 'blockAndTrap': 2, 'permitAndTrap': 3, 'blockAndLogInput': 7, 'blockAndDisablePort': 5, 'permit': 4, 'block': 1, 'permitAndLogInput': 8.
                   rlPolicyRulesDroppedPackets 1.3.6.1.4.1.89.59.3.2.1.7 counter32 read-only
The number of packets blocked by this filtering rule.
                   rlPolicyRulesFurtherRefPointer 1.3.6.1.4.1.89.59.3.2.1.8 integer read-write
This further reference indicate on the entry at the metering or action table, based on the supported features. The rlPolicyRulesFurtherRefPointer points on the metering table if the metering feature is supported, if not this fields points on the Action table
                   rlPolicyRulesDescription 1.3.6.1.4.1.89.59.3.2.1.9 displaystring read-write
Free text specifing the nature of this Rule.
                   rlPolicyRulesStatus 1.3.6.1.4.1.89.59.3.2.1.10 rowstatus read-write
Row status of the Rules entry.
                   rlPolicyRulesCounterIdx 1.3.6.1.4.1.89.59.3.2.1.11 integer read-write
If not zero, perform counting of matched packets .
                   rlPolicyRulesCounter 1.3.6.1.4.1.89.59.3.2.1.12 counter32 read-only
The number of packets that matched this filtering rule.
                   rlPolicyRulesActionPointer 1.3.6.1.4.1.89.59.3.2.1.13 integer read-write
This further reference indicate on the entry at the action table, The rlPolicyRulesActionPointer points on the action table if the aggregate metering feature is supported,or if meter is not belong to data path.
                   rlPolicyRulesTimeRange1 1.3.6.1.4.1.89.59.3.2.1.14 integer read-write
Time range of the first ACL.
                   rlPolicyRulesTimeRange2 1.3.6.1.4.1.89.59.3.2.1.15 integer read-write
Time range of the second ACL.
                   rlPolicyRulesSrcPortRangeStart 1.3.6.1.4.1.89.59.3.2.1.16 integer read-write
Start port of port range for source port.
                   rlPolicyRulesSrcPortRangeEnd 1.3.6.1.4.1.89.59.3.2.1.17 integer read-write
End port of port range for source port.
                   rlPolicyRulesDestPortRangeStart 1.3.6.1.4.1.89.59.3.2.1.18 integer read-write
Start port of port range for destination port.
                   rlPolicyRulesDestPortRangeEnd 1.3.6.1.4.1.89.59.3.2.1.19 integer read-write
End port of port range for destination port.
                   rlPolicyRulesActionDropType 1.3.6.1.4.1.89.59.3.2.1.20 rlpolicyrulesactiondroptype read-write
This field is valid only if rlPolicyRulesFilteringAction is not permit. Used to distinguish between Hard and Soft drop.
           rlPolicyRulesDownloadMarker 1.3.6.1.4.1.89.59.3.3 integer read-write
Indicates when rules download or removing starts and terminates. Enumeration: 'finishCombined': 3, 'finish': 2, 'undo': 4, 'deleteFinish': 6, 'start': 1, 'deleteStart': 5.
       rlPolicyMeterClass 1.3.6.1.4.1.89.59.4
           rlPolicyMeterPlatDependParams 1.3.6.1.4.1.89.59.4.1
               rlPolicyMeterDepth 1.3.6.1.4.1.89.59.4.1.1 integer read-only
Indicates how many meters can be chained in succession (ie. so that if the first meter fails, the second can be examined). The final meter in a sequence is always 'always-conform', so if the value of this parameter is 2, the platform that supports a single meter and then a second marking/action for meter failure.
           rlPolicyMeterClassTable 1.3.6.1.4.1.89.59.4.2 no-access
This table defines the Metering classes for the system.
               rlPolicyMeteringClassEntry 1.3.6.1.4.1.89.59.4.2.1 no-access
Each statement consists of the following parameters
                   rlPolicyMeteringClassIndex 1.3.6.1.4.1.89.59.4.2.1.1 integer read-only
This enumerates the table entry.
                   rlPolicyMeteringClassAlwaysConform 1.3.6.1.4.1.89.59.4.2.1.2 truthvalue read-write
If true, the meter always accepts all traffic; its rate is effectively infinite. In such a case, the token bucket defined by the MeterRate and Burst-Size parameters is ignored. also used when there isn't metering support.
                   rlPolicyMeteringClassAggregateMeterRate 1.3.6.1.4.1.89.59.4.2.1.3 integer read-write
The rate in kilobytes/second of traffic considered within the bandwidth allocated for this policy entry.
                   rlPolicyMeteringClassAggregateMeterBurstSize 1.3.6.1.4.1.89.59.4.2.1.4 integer read-write
The Burst Size parameter for the aggregate meter leaky bucket. A value of 0 means that the device should choose the Burst Size that it thinks is most suitable for the rule. The interval can be derived from (burstSizex8/Rate).
                   rlPolicyMeteringClassPerSessionMeteringRate 1.3.6.1.4.1.89.59.4.2.1.5 integer read-write
A Quantitative Appliction policy rule where each individual session requires a guaranteed minimum bandwidth. Specifies the Ingress traffic flow meter per session indicate a bandwidth limit to be applied to each individual session Value 0 at rlPolicyMeteringClassPerSessionMetering and rlPolicyMeteringClassMaxSessionLimit is interpreted to mean no sepecific requarment and the aggregate metering will be done by the system decision. The rate in kilobytes/second
                   rlPolicyMeteringClassMaxSessionLimit 1.3.6.1.4.1.89.59.4.2.1.6 integer read-write
indicate a the maximum number of session for a sepecific rule to guarante minimum bandwidth. Value 0 at rlPolicyMeteringClassPerSessionMetering and rlPolicyMeteringClassMaxSessionLimit is interpreted to mean no sepecific requarment and the aggregate metering will be done by the system decision.
                   rlPolicyMeteringClassActionPointer 1.3.6.1.4.1.89.59.4.2.1.7 integer read-write
Specifies the index in the rlPolicyActionTable to be accessed for packets that are in-profile. Value 0 is interpreted to mean no action. A non-zero value may be specified only for RoutedIp packets in Diffserv mode.
                   rlPolicyMeteringClassFailMeterPointer 1.3.6.1.4.1.89.59.4.2.1.8 integer read-write
Specifies an index in the rlPolicyMeterClassTable. This is the meter that is to be used if the packet is out-of-profile relative to the current meter. If non-Diffserv mode, this field is not used. If the current meter is AlwaysConform, this field is not used.
                   rlPolicyMeteringClassStatus 1.3.6.1.4.1.89.59.4.2.1.9 rowstatus read-write
The status of a table entry. It is used to delete an entry from this table.
                   rlPolicyMeteringCounterEnable 1.3.6.1.4.1.89.59.4.2.1.10 truthvalue read-write
Enable metering counter for the meter entry.
                   rlPolicyMeteringClassInProfileCounter 1.3.6.1.4.1.89.59.4.2.1.11 counter32 read-only
meter counter for packets that are in profile .
                   rlPolicyMeteringClassOutProfileCounter 1.3.6.1.4.1.89.59.4.2.1.12 counter32 read-only
meter counter for packets that are out of profile
       rlPolicyAction 1.3.6.1.4.1.89.59.5
           rlPolicyActionPlatDependParams 1.3.6.1.4.1.89.59.5.1
               rlPolicyActionMREDSupported 1.3.6.1.4.1.89.59.5.1.1 integer read-only
Indicates whether the platform supports setting MRED characteristics in the packet action Enumeration: 'notSupported': 2, 'supported': 1.
               rlPolicyActionDroppedPacketCountSupported 1.3.6.1.4.1.89.59.5.1.2 truthvalue read-only
Indicates whether the platform can maintain a count of packets Marked for drop by a particular action.
               rlPolicyActionDroppedDropPrecedenceSupported 1.3.6.1.4.1.89.59.5.1.3 truthvalue read-only
Indicates whether the platform support at drop precedence.
               rlPolicyActionInProfileDropPrecedence 1.3.6.1.4.1.89.59.5.1.4 octet string read-only
A bit mask indicating which drop precedence supported ---------- |87654321| ---------- 1 - low, 2 - medium, 3 - high, 4 - drop
               rlPolicyActionOutProfileDropPrecedence 1.3.6.1.4.1.89.59.5.1.5 octet string read-only
A bit mask indicating which drop precedence supported ---------- |87654321| ---------- 1 - low, 2 - medium, 3 - high, 4 - drop
               rlPolicyActionDscpSupport 1.3.6.1.4.1.89.59.5.1.6 truthvalue read-only
Indicates whether the platform support at DSCP filed modification.
               rlPolicyActionDsQueueManagmentSupported 1.3.6.1.4.1.89.59.5.1.7 integer read-only
Indicates whether the platform supports at Q managment for implementation, mred, randomDrop used by the min/max threshold Enumeration: 'notSupported': 2, 'supported': 1.
           rlPolicyActionTable 1.3.6.1.4.1.89.59.5.2 no-access
This table defines the Actions for packets that pass the meter table ie. the characteristics that are assigned to packets before they reach the scheduler. When Diffserv is not in effect(ie. IPX, bridging, or IP when the global option for Diffserv is off), certain table parameters are not available(see below). The DiffServ option is enabled or disabled by setting rlDiffservModeEnabled.
               rlPolicyActionEntry 1.3.6.1.4.1.89.59.5.2.1 no-access
Each multifield classification statement consists of the following parameters
                   rlPolicyActionIndex 1.3.6.1.4.1.89.59.5.2.1.1 integer read-only
This enumerates the Action entry.
                   rlPolicyActionNewDscp 1.3.6.1.4.1.89.59.5.2.1.2 integer read-write
Indicates the new DSCP with which the packet should be marked
                   rlPolicyActionChangeDscp 1.3.6.1.4.1.89.59.5.2.1.3 truthvalue read-write
If true, the packet is re-marked with the value indicated by newDscp above. If false, the packet's DSCP value is not changed
                   rlPolicyActionMinThreshold 1.3.6.1.4.1.89.59.5.2.1.4 integer read-write
The min-threshold is the queue depth that a random drop process will seek to manage the queue's depth to. This object is in the action table rather than the queue table because Differentiated Services PHBs, such as the Assured Service, permit differently classified traffic to have different drop parameters even though they occupy the same queue.
                   rlPolicyActionMaxThreshold 1.3.6.1.4.1.89.59.5.2.1.5 integer read-write
The max-threshold is the maximum permissible queue depth. In tail drop scenarios, the queue will drop if a packet is presented to it and it is instantaneously full by this measure. In random drop scenarios, the queue will drop if a packet is presented to it and the average queue depth exceeds the max-threshold. This object is in the action table rather than the queue table because Differentiated Services PHBs, such as the Assured Service, permit differently classified traffic to have different drop parameters even though they occupy the same queue.
                   rlPolicyActionDropPolicy 1.3.6.1.4.1.89.59.5.2.1.6 integer read-write
Enumeration: 'randomDrop': 4, 'other': 1, 'tailDrop': 3, 'alwaysDrop': 2.
                   rlPolicyActionDroppedPackets 1.3.6.1.4.1.89.59.5.2.1.7 counter32 read-only
The number of packets dropped by this action
                   rlPolicyActionNonDsInProfileDropPrecedence 1.3.6.1.4.1.89.59.5.2.1.8 integer read-write
This paramer is used at non diffserv mode to attached the drop precedence for packet InProfile (metering), only if there is a support for drop precedence and with what level. Enumeration: 'high': 3, 'drop': 4, 'medium': 2, 'low': 1.
                   rlPolicyActionNonDsOutProfileDropPrecedence 1.3.6.1.4.1.89.59.5.2.1.9 integer read-write
This paramer is used at non diffserv mode to attached the drop precedence for packet OutProfile (metering), only if there is a support for drop precedence and with what level. Enumeration: 'high': 3, 'drop': 4, 'medium': 2, 'low': 1.
                   rlPolicyActionChangeVpt 1.3.6.1.4.1.89.59.5.2.1.10 truthvalue read-write
Routed packets that run through the Rules receive VPT as define at the service class they attached to, bridge packets receive through the 802.1p operation unless we define to change the VPT for those packets.
                   rlPolicyActionNewVpt 1.3.6.1.4.1.89.59.5.2.1.11 integer read-write
Priority Tag that will be written to packets .
                   rlPolicyActionServiceClassPointer 1.3.6.1.4.1.89.59.5.2.1.12 integer read-write
Specifies the index in rlPolicyServiceClassTable denoting the service class to which the packet should be assigned after the action specified in this entry is carried out. A value of 0 means that no Service class is assigned. A value of 0 is legal only for routedIp packets in Diffserv mode on Inbound processing.
                   rlPolicyActionStatus 1.3.6.1.4.1.89.59.5.2.1.13 rowstatus read-write
The status of the table entry
                   rlPolicyActionChangeDscpNonConform 1.3.6.1.4.1.89.59.5.2.1.14 truthvalue read-write
If true, the packet is re-marked with the value indicated by newDscp for non conforming packets. If false, the packet's DSCP value is not changed
                   rlPolicyActionChangeNewDscpNonConform 1.3.6.1.4.1.89.59.5.2.1.15 integer read-write
Indicates the new DSCP with which the packet should be marked
                   rlPolicyActionAdvancedTrustMode 1.3.6.1.4.1.89.59.5.2.1.16 truthvalue read-write
Indicates if egress queue is assigned for packets match rule according to global trust mode or note.
                   rlPolicyActionNewIpPrecedence 1.3.6.1.4.1.89.59.5.2.1.17 integer read-write
Indicates the new Ip- Precedence with which the packet should be marked
                   rlPolicyActionChangeIpPrecedence 1.3.6.1.4.1.89.59.5.2.1.18 truthvalue read-write
If true, the packet is re-marked with the value indicated by newIpPrecedence above. If false, the packet's DSCP value is not changed
                   rlPolicyActionReDirect 1.3.6.1.4.1.89.59.5.2.1.19 rlpolicyredirectaction read-write
Specified the redirection action/
                   rlPolicyActionNewInterface 1.3.6.1.4.1.89.59.5.2.1.20 interfaceindexorzero read-write
Relevant if rlQosClassMapRedirect is either 'redirectToInterface' or 'analyzerPort'. Specified the output interface the packet is redireted to or the port that gets copy of the packet in addition to the port it was farwarded.
                   rlPolicyActionChangeVidAction 1.3.6.1.4.1.89.59.5.2.1.21 rlpolicymarkvlanaction read-write
If 'mark', than the classified traffic will be remarked with new VLAN id. If 'disabled' VLAN id is not changed. If markNestedVlan, if the egress interface defined as VLAN tagged member then a new VLAN tag is added to the packet.
                   rlPolicyActionNewVid 1.3.6.1.4.1.89.59.5.2.1.22 integer read-write
If rlPolicyActionChangeVid is true, specify the new Vlan id to assigned to the packet
                   rlPolicyActionTrapTypeId 1.3.6.1.4.1.89.59.5.2.1.23 integer read-write
If now zero, Indicates the trap type id the matched packets arrives with, relevant when RedirectAction is trap or mirror.
                   rlPolicyActionAddTunnel 1.3.6.1.4.1.89.59.5.2.1.24 unsigned32 read-write
If not zero - Tunnel is added to matched packets.
       rlPolicyServiceClass 1.3.6.1.4.1.89.59.6
           rlPolicyServiceClassPlatDependParams 1.3.6.1.4.1.89.59.6.1
               rlPolicyNumberOfServiceClassesSupported 1.3.6.1.4.1.89.59.6.1.1 integer read-only
Indicates the number of service classes supported on each port of the platform. Service classes can be neither created nor destroyed.
               rlPolicyBoundedPriorityQueueSupport 1.3.6.1.4.1.89.59.6.1.2 integer read-only
Indicates whether the platform supports setting an upper limit to the bandwidth of traffic transmitted on queues operating in Strict Priority mode. Enumeration: 'notSupported': 2, 'supported': 1.
           rlPolicyDefaultServiceClass 1.3.6.1.4.1.89.59.6.2 integer read-write
Indicates which service class is default one for packets whose COS is undetermined.
           rlPolicyActiveServiceClassTable 1.3.6.1.4.1.89.59.6.3 integer read-write
Specifies the Service Class table preform active action (usuarlly after set of entries at the service class tentative table). Specifies the current status of a table, there could be two options, tentative/active table. only the tentative table is the read-write and the active table is read-only. at set to activeAction the tentative table will be copied to the active table. Enumeration: 'active': 1, 'notActive': 2.
           rlPolicyServiceClassTentativeTable 1.3.6.1.4.1.89.59.6.4 no-access
This table defines the service classes for the system ie. the queue discipline and weight characteristics that are implemented on each port unless the user configures a port specific value in .... The total number of service classes defined can not exceed rlPolicyNumberOfTransmitQueuesPerPort.
               rlPolicyServiceClassTentativeEntry 1.3.6.1.4.1.89.59.6.4.1 no-access
Each multifield classification statement consists of the following parameters
                   rlPolicyServiceClassTentativeIndex 1.3.6.1.4.1.89.59.6.4.1.1 integer read-only
This enumerates the ServiceClass Tentative entry.
                   rlPolicyServiceClassTentativeName 1.3.6.1.4.1.89.59.6.4.1.2 displaystring read-write
The name given by the system administrator to the class.
                   rlPolicyServiceClassTentativePhbType 1.3.6.1.4.1.89.59.6.4.1.3 integer read-write
Indicates the type of Diffserv per-hop behaviour that this service class is intended to support. This object can be set by the user only in DiffServ mode (i.e. rlDiffservModeEnabled = enabled). Enumeration: 'expeditedForwarding': 1, 'assuredForwarding': 2, 'bestEffort': 3.
                   rlPolicyServiceClassTentativeMinRate 1.3.6.1.4.1.89.59.6.4.1.4 integer read-write
Specifies either the minimum throughput of the queue as a percentage of the throughput of each output port on which the service class is implemented. If zero, there is no minimum rate. This field can not be set by the user if rlDiffservModeEnabled = disabled and rlPolicyServiceClassPriority > 0 or rlDiffservModeEnabled = enabled and rlPolicyServiceClassPhbType = expeditedForwarding.
                   rlPolicyServiceClassTentativeMaxRate 1.3.6.1.4.1.89.59.6.4.1.5 integer read-write
Specifies either the upper limit on the throughput of the queue as a percentage of the throughput of each output port on which the service class is implemented. If zero, there is no maximum rate. This field can not be set by the user if rlDiffservModeEnabled = disabled and rlPolicyServiceClassPriority = 0 or rlDiffservModeEnabled = enabled and rlPolicyServiceClassPhbType != expeditedForwarding or rlBoundedPriorityQueueSupport = notSupported.
                   rlPolicyServiceClassTentativePriority 1.3.6.1.4.1.89.59.6.4.1.6 integer read-write
If non-zero, this service class will operate as a priority service class with the specified priority value. This object can not be set in Diffserv mode (i.e. rlDiffservModeEnabled = enabled), in which case rlServiceClassPhbType should be used instead. It can't be set when rlBoundedPriorityQueueSupport = notSupported as well.
                   rlPolicyServiceClassTentative8021DPri 1.3.6.1.4.1.89.59.6.4.1.7 integer read-write
802.1D Priority Tag that will be written to routed packets and untagged bridged packets transmitted with this service class.
                   rlPolicyServiceClassTentativeStatus 1.3.6.1.4.1.89.59.6.4.1.8 rowstatus read-write
Status of this entry.
                   rlPolicyServiceClassTentativeTdThersholdDp0 1.3.6.1.4.1.89.59.6.4.1.9 integer read-write
Tail Drop Threshold for Drop Precedence 0. UNITS percent 0-100
                   rlPolicyServiceClassTentativeTdThersholdDp1 1.3.6.1.4.1.89.59.6.4.1.10 integer read-write
Tail Drop Threshold for Drop Precedence 1. UNITS percent 0-100
                   rlPolicyServiceClassTentativeTdThersholdDp2 1.3.6.1.4.1.89.59.6.4.1.11 integer read-write
Tail Drop Threshold for Drop Precedence 2. UNITS percent 0-100
                   rlPolicyServiceClassTentativeRedMinDp0 1.3.6.1.4.1.89.59.6.4.1.12 integer read-write
WRED Min Threshold for Drop Precedence 0. UNITS percent 0-100
                   rlPolicyServiceClassTentativeRedMaxDp0 1.3.6.1.4.1.89.59.6.4.1.13 integer read-write
WRED Max Threshold for Drop Precedence 0. UNITS percent 0-100
                   rlPolicyServiceClassTentativeRedProbDp0 1.3.6.1.4.1.89.59.6.4.1.14 integer read-write
WRED probability for Drop Precedence 0.
                   rlPolicyServiceClassTentativeRedMinDp1 1.3.6.1.4.1.89.59.6.4.1.15 integer read-write
WRED Min Threshold for Drop Precedence 1. UNITS percent 0-100
                   rlPolicyServiceClassTentativeRedMaxDp1 1.3.6.1.4.1.89.59.6.4.1.16 integer read-write
WRED Max Threshold for Drop Precedence 1. UNITS percent 0-100
                   rlPolicyServiceClassTentativeRedProbDp1 1.3.6.1.4.1.89.59.6.4.1.17 integer read-write
WRED probability for Drop Precedence 1.
                   rlPolicyServiceClassTentativeRedMinDp2 1.3.6.1.4.1.89.59.6.4.1.18 integer read-write
WRED Min Threshold for Drop Precedence 2. UNITS percent 0-100
                   rlPolicyServiceClassTentativeRedMaxDp2 1.3.6.1.4.1.89.59.6.4.1.19 integer read-write
WRED Max Threshold for Drop Precedence 2. UNITS percent 0-100
                   rlPolicyServiceClassTentativeRedProbDp2 1.3.6.1.4.1.89.59.6.4.1.20 integer read-write
WRED probability for Drop Precedence 2.
                   rlPolicyServiceClassTentativeRedQweight 1.3.6.1.4.1.89.59.6.4.1.21 integer read-write
additional parameter for the WRED algorithem supporting the Queue weight exponentail factor
                   rlPolicyServiceClassTentativeShaperStatus 1.3.6.1.4.1.89.59.6.4.1.22 truthvalue read-write
If there is shaper on the Queue
                   rlPolicyServiceClassTentativeCirQueueShaper 1.3.6.1.4.1.89.59.6.4.1.23 integer read-write
The CIR for the Queue shaper. N/A when the shper is disabled. UNITS bps bits per second
                   rlPolicyServiceClassTentativeCbsQueueShaper 1.3.6.1.4.1.89.59.6.4.1.24 integer read-write
The CBS for the Queue shaper. N/A when the shper is disabled. UNITS bytes
           rlPolicyServiceClassActiveTable 1.3.6.1.4.1.89.59.6.5 no-access
This table defines the service classes for the system ie. the queue discipline and weight characteristics that are implemented on each port unless the user configures a port specific value in .... The total number of service classes defined can not exceed rlPolicyNumberOfTransmitQueuesPerPort.
               rlPolicyServiceClassActiveEntry 1.3.6.1.4.1.89.59.6.5.1 no-access
Each multifield classification statement consists of the following parameters
                   rlPolicyServiceClassActiveIndex 1.3.6.1.4.1.89.59.6.5.1.1 integer read-only
This enumerates the ServiceClass Active entry.
                   rlPolicyServiceClassActiveName 1.3.6.1.4.1.89.59.6.5.1.2 displaystring read-only
The name given by the system administrator to the class.
                   rlPolicyServiceClassActivePhbType 1.3.6.1.4.1.89.59.6.5.1.3 integer read-only
Indicates the type of Diffserv per-hop behaviour that this service class is intended to support. This object can be set by the user only in DiffServ mode (i.e. rlDiffservModeEnabled = enabled). Enumeration: 'expeditedForwarding': 1, 'assuredForwarding': 2, 'bestEffort': 3.
                   rlPolicyServiceClassActiveMinRate 1.3.6.1.4.1.89.59.6.5.1.4 integer read-only
Specifies either the minimum throughput of the queue as a percentage of the throughput of each output port on which the service class is implemented. If zero, there is no minimum rate. This field can not be set by the user if rlDiffservModeEnabled = disabled and rlPolicyServiceClassPriority > 0 or rlDiffservModeEnabled = enabled and rlPolicyServiceClassPhbType = expeditedForwarding.
                   rlPolicyServiceClassActiveMaxRate 1.3.6.1.4.1.89.59.6.5.1.5 integer read-only
Specifies either the upper limit on the throughput of the queue as a percentage of the throughput of each output port on which the service class is implemented. If zero, there is no maximum rate. This field can not be set by the user if rlDiffservModeEnabled = disabled and rlPolicyServiceClassPriority = 0 or rlDiffservModeEnabled = enabled and rlPolicyServiceClassPhbType != expeditedForwarding or rlBoundedPriorityQueueSupport = notSupported.
                   rlPolicyServiceClassActivePriority 1.3.6.1.4.1.89.59.6.5.1.6 integer read-only
If non-zero, this service class will operate as a priority service class with the specified priority value. This object can not be set in Diffserv mode (i.e. rlDiffservModeEnabled = enabled), in which case rlServiceClassPhbType should be used instead. It can't be set when rlBoundedPriorityQueueSupport = notSupported as well.
                   rlPolicyServiceClassActive8021DPri 1.3.6.1.4.1.89.59.6.5.1.7 integer read-only
802.1D Priority Tag that will be written to routed packets and untagged bridged packets transmitted with this service class.
                   rlPolicyServiceClassActiveTdThersholdDp0 1.3.6.1.4.1.89.59.6.5.1.8 integer read-only
Tail Drop Threshold for Drop Precedence 0. UNITS percent 0-100
                   rlPolicyServiceClassActiveTdThersholdDp1 1.3.6.1.4.1.89.59.6.5.1.9 integer read-only
Tail Drop Threshold for Drop Precedence 1. UNITS percent 0-100
                   rlPolicyServiceClassActiveTdThersholdDp2 1.3.6.1.4.1.89.59.6.5.1.10 integer read-only
Tail Drop Threshold for Drop Precedence 2. UNITS percent 0-100
                   rlPolicyServiceClassActiveRedMinDp0 1.3.6.1.4.1.89.59.6.5.1.11 integer read-only
WRED Min Threshold for Drop Precedence 0. UNITS percent 0-100
                   rlPolicyServiceClassActiveRedMaxDp0 1.3.6.1.4.1.89.59.6.5.1.12 integer read-only
WRED Max Threshold for Drop Precedence 0. UNITS percent 0-100
                   rlPolicyServiceClassActiveRedProbDp0 1.3.6.1.4.1.89.59.6.5.1.13 integer read-only
WRED probability for Drop Precedence 0.
                   rlPolicyServiceClassActiveRedMinDp1 1.3.6.1.4.1.89.59.6.5.1.14 integer read-only
WRED Min Threshold for Drop Precedence 1. UNITS percent 0-100
                   rlPolicyServiceClassActiveRedMaxDp1 1.3.6.1.4.1.89.59.6.5.1.15 integer read-only
WRED Max Threshold for Drop Precedence 1. UNITS percent 0-100
                   rlPolicyServiceClassActiveRedProbDp1 1.3.6.1.4.1.89.59.6.5.1.16 integer read-only
WRED probability for Drop Precedence 1.
                   rlPolicyServiceClassActiveRedMinDp2 1.3.6.1.4.1.89.59.6.5.1.17 integer read-only
WRED Min Threshold for Drop Precedence 2. UNITS percent 0-100
                   rlPolicyServiceClassActiveRedMaxDp2 1.3.6.1.4.1.89.59.6.5.1.18 integer read-only
WRED Max Threshold for Drop Precedence 2. UNITS percent 0-100
                   rlPolicyServiceClassActiveRedProbDp2 1.3.6.1.4.1.89.59.6.5.1.19 integer read-only
WRED probability for Drop Precedence 2.
                   rlPolicyServiceClassActiveRedQweight 1.3.6.1.4.1.89.59.6.5.1.20 integer read-only
additional parameter for the WRED algorithem supporting the Queue weight exponentail factor
                   rlPolicyServiceClassActiveShaperStatus 1.3.6.1.4.1.89.59.6.5.1.21 truthvalue read-only
If there is shaper on the Queue
                   rlPolicyServiceClassActiveCirQueueShaper 1.3.6.1.4.1.89.59.6.5.1.22 integer read-only
The CIR for the queue shaper. N/A when the shper is disabled UNITS bps bits per second
                   rlPolicyServiceClassActiveCbsQueueShaper 1.3.6.1.4.1.89.59.6.5.1.23 integer read-only
The CBS for the queue shaper. N/A when the shper is disabled. UNITS bytes
           rlPolicyPortConfigurationTable 1.3.6.1.4.1.89.59.6.6 no-access
This table enables the network administrator to fine-tune the bandwidth given to each service class on each port. The values in this table will thus override those of the rlServiceClassTable (THIS TABLE IS MANAGE FROM 3SW).
               rlPolicyPortCfgEntry 1.3.6.1.4.1.89.59.6.6.1 no-access
Configuration parameters for each port/service class.
                   rlPolicyPortCfgIfIndex 1.3.6.1.4.1.89.59.6.6.1.1 interfaceindex read-only
Interface index.
                   rlPolicyPortCfgMinimalBandwidth 1.3.6.1.4.1.89.59.6.6.1.2 object identifier read-write
The list of objects contain parameters at Precents type for the minimal bandwidth to this port/service class at WWR . The OID length is based on the number of the service class number, every OID define parameter of service class.
                   rlPolicyPortCfgMaximalBandwidth 1.3.6.1.4.1.89.59.6.6.1.3 object identifier read-write
The list of objects contain parameters at Precents type for the maximal bandwidth to this port/service class at SP . The OID length is based on the number of the service class number, every OID define parameter of service class.
                   rlPolicyPortCfgStatus 1.3.6.1.4.1.89.59.6.6.1.4 rowstatus read-write
Status of this entry.
                   rlpolicyDropProfilePointer 1.3.6.1.4.1.89.59.6.6.1.5 integer read-write
pointing to drop algorithem profile. the profile describs the drop algorithem (tail, red)and params
                   rlPolicyPortCfgQueueShaperStatus 1.3.6.1.4.1.89.59.6.6.1.6 object identifier read-write
If there is shaper on the Queue
                   rlPolicyPortCfgCirQueueShaper 1.3.6.1.4.1.89.59.6.6.1.7 object identifier read-write
The CIR for the Queue shaper. N/A when the shper is disabled UNITS bps bits per second
                   rlPolicyPortCfgCbsQueueShaper 1.3.6.1.4.1.89.59.6.6.1.8 object identifier read-write
The CBS for the Queue shaper. N/A when the shper is disabled. UNITS bytes
                   rlPolicyPortCfgPortShaperStatus 1.3.6.1.4.1.89.59.6.6.1.9 truthvalue read-write
If there is shaper on the port
                   rlPolicyPortCfgCirPortShaper 1.3.6.1.4.1.89.59.6.6.1.10 integer read-write
The CIR for the port shaper. N/A when the shper is disabled UNITS bps bits per second
                   rlPolicyPortCfgCbsPortShaper 1.3.6.1.4.1.89.59.6.6.1.11 integer read-write
The CBS for the port shaper. N/A when the shper is disabled. UNITS bytes
                   rlPolicyPortCfgPortRateLimitStatus 1.3.6.1.4.1.89.59.6.6.1.12 truthvalue read-write
If there is Rate Limit on the port
                   rlPolicyPortCfgCirPortRateLimit 1.3.6.1.4.1.89.59.6.6.1.13 integer read-write
The CIR for the port Rate limit. N/A when the Rate limit is disabled UNITS bps bits per second
                   rlPolicyPortCfgCbsPortRateLimit 1.3.6.1.4.1.89.59.6.6.1.14 integer read-write
The CBS for the port Rate Limit. N/A when the Rate Limit is disabled. UNITS bytes
           rlPolicyDropProfileTable 1.3.6.1.4.1.89.59.6.7 no-access
this table defines drop profile which describ the queue's drop algorithems
               rlPolicyDropProfileEntry 1.3.6.1.4.1.89.59.6.7.1 no-access
Configuration parameters for each port/service class.
                   rlPolicyDropProfileIndex 1.3.6.1.4.1.89.59.6.7.1.1 integer read-only
Interface index.
                   rlPolicyDropProfileQueueNumber 1.3.6.1.4.1.89.59.6.7.1.2 integer read-only
Interface Queue number.
                   rlPolicyDropProfileTdThersholdDp0 1.3.6.1.4.1.89.59.6.7.1.3 integer read-write
Tail Drop Threshold for Drop Precedence 0. UNITS percent 0-100
                   rlPolicyDropProfileTdThersholdDp1 1.3.6.1.4.1.89.59.6.7.1.4 integer read-write
Tail Drop Threshold for Drop Precedence 1. UNITS percent 0-100
                   rlPolicyDropProfileTdThersholdDp2 1.3.6.1.4.1.89.59.6.7.1.5 integer read-write
Tail Drop Threshold for Drop Precedence 2. UNITS percent 0-100
                   rlPolicyDropProfileRedMinDp0 1.3.6.1.4.1.89.59.6.7.1.6 integer read-write
WRED Min Threshold for Drop Precedence 0. UNITS percent 0-100
                   rlPolicyDropProfileRedMaxDp0 1.3.6.1.4.1.89.59.6.7.1.7 integer read-write
WRED Max Threshold for Drop Precedence 0. UNITS percent 0-100 0-100
                   rlPolicyDropProfileRedProbDp0 1.3.6.1.4.1.89.59.6.7.1.8 integer read-write
WRED probability for Drop Precedence 0.
                   rlPolicyDropProfileRedMinDp1 1.3.6.1.4.1.89.59.6.7.1.9 integer read-write
WRED Min Threshold for Drop Precedence 1. UNITS percent 0-100
                   rlPolicyDropProfileRedMaxDp1 1.3.6.1.4.1.89.59.6.7.1.10 integer read-write
WRED Max Threshold for Drop Precedence 1. UNITS percent 0-100
                   rlPolicyDropProfileRedProbDp1 1.3.6.1.4.1.89.59.6.7.1.11 integer read-write
WRED probability for Drop Precedence 1.
                   rlPolicyDropProfileRedMinDp2 1.3.6.1.4.1.89.59.6.7.1.12 integer read-write
WRED Min Threshold for Drop Precedence 2. UNITS percent 0-100
                   rlPolicyDropProfileRedMaxDp2 1.3.6.1.4.1.89.59.6.7.1.13 integer read-write
WRED Max Threshold for Drop Precedence 2. UNITS percent 0-100
                   rlPolicyDropProfileRedProbDp2 1.3.6.1.4.1.89.59.6.7.1.14 integer read-write
WRED probability for Drop Precedence 2.
                   rlPolicyDropProfileRedQweight 1.3.6.1.4.1.89.59.6.7.1.15 integer read-write
additional parameter for the WRED algorithem supporting the Queue weight exponentail factor
                   rlPolicyDropProfileStatus 1.3.6.1.4.1.89.59.6.7.1.16 rowstatus read-write
Status of this entry.
           rlPolicyVlanConfigurationTable 1.3.6.1.4.1.89.59.6.8 no-access
This table enables the network administrator to fine-tune the rate limit given to each vlan. The values in this table will thus override those of the rlQosIfPolicyTable (THIS TABLE IS MANAGED FROM 3SW).
               rlPolicyVlanCfgEntry 1.3.6.1.4.1.89.59.6.8.1 no-access
Configuration parameters for each vlan.
                   rlPolicyVlanCfgVlanId 1.3.6.1.4.1.89.59.6.8.1.1 vlanid read-only
Interface index.
                   rlPolicyVlanCfgPortRateLimitStatus 1.3.6.1.4.1.89.59.6.8.1.2 truthvalue read-write
If there is Rate Limit on the vlan
                   rlPolicyVlanCfgCirPortRateLimit 1.3.6.1.4.1.89.59.6.8.1.3 integer read-write
The CIR for the port Rate limit. N/A when the Rate limit is disabled UNITS bps bits per second
                   rlPolicyVlanCfgCbsPortRateLimit 1.3.6.1.4.1.89.59.6.8.1.4 integer read-write
The CBS for the port Rate Limit. N/A when the Rate Limit is disabled. UNITS bytes
                   rlPolicyVlanCfgStatus 1.3.6.1.4.1.89.59.6.8.1.5 rowstatus read-write
Status of this entry.
       rlPolicyDiffServ 1.3.6.1.4.1.89.59.7
           rlPolicyDiffServPlatDependParams 1.3.6.1.4.1.89.59.7.1
               rlDiffservModeSupported 1.3.6.1.4.1.89.59.7.1.1 integer read-only
Indicates whether Diffserv mode is supported on the platform. Enumeration: 'notSupported': 2, 'supported': 1.
           rlDiffservModeEnabled 1.3.6.1.4.1.89.59.7.2 integer read-write
Indicates whether Diffserv mode is currently enabled. Enumeration: 'disabled': 2, 'enabled': 1.
           rlDiffservBoundaryTable 1.3.6.1.4.1.89.59.7.3 no-access
Indicates whether a port is considered a boundary or an interior node of the Diffserv domain
               rlDiffservBoundaryEntry 1.3.6.1.4.1.89.59.7.3.1 no-access
Each boundary/interior ports table entry consists of the following parameters
                   rlDiffservBoundaryIfIndex 1.3.6.1.4.1.89.59.7.3.1.1 integer read-only
The Interface index whose type is being defined
                   rlDiffservBoundaryPortType 1.3.6.1.4.1.89.59.7.3.1.2 integer read-write
The boundary status of the port. Enumeration: 'interior': 2, 'boundary': 1.
                   rlDiffservBoundaryStatus 1.3.6.1.4.1.89.59.7.3.1.3 rowstatus read-write
Status of this entry.
       rlPolicyGlobalParams 1.3.6.1.4.1.89.59.9
           rlPolicyGlobalOperationEnabled 1.3.6.1.4.1.89.59.9.1 integer read-write
Indicates whether Policy is currently enabled. Enumeration: 'disabled': 2, 'enabled': 1.
           rlPolicyGlobalDefaultForwarding 1.3.6.1.4.1.89.59.9.2 truthvalue read-write
Indicates whether or not the unmach traffic is forwarded or blocked.
           rlPolicyGlobalAdminTrapfrequency 1.3.6.1.4.1.89.59.9.3 integer read-write
define the the min number of seconds between successive traps. 0 means no traps will be sent, uints in Sec
           rlPolicyGlobalOperTrapElapsedTime 1.3.6.1.4.1.89.59.9.4 integer read-only
show the time out elaps from the last trap sent uints in Sec.
           rlPolicyGlobalQosMode 1.3.6.1.4.1.89.59.9.5 rlpolicyqosmode read-write
V750 DEPRECATED - replaced with rlPolicyGlobalQosMode field in rlPolicyQosModeGlobalCfg table. user can set the system to operate either in the Basic mode or in the Advanced mode
           rlPolicyGlobalTrustMode 1.3.6.1.4.1.89.59.9.6 rlpolicytrusttypes read-write
V750 DEPRECATED - replaced with rlPolicyGlobalTrustMode field in rlPolicyQosModeGlobalCfg table. Global Trust state. the value refered to Basic mode and specify the trust mode the device is support. all phisical ports are trusted
           rlPolicyGlobalDeviceQosOperationTypes 1.3.6.1.4.1.89.59.9.7 integer read-only
Indicates if the system support basic or advanced mode or Both basic and Advanced Enumeration: 'notSupported': 5, 'all': 4, 'disable': 1, 'advanced': 3, 'basic': 2.
           rlPolicyGlobalDscpMutationSupported 1.3.6.1.4.1.89.59.9.8 truthvalue read-only
mutation over the ingress packet dscp field supported for the device.
           rlPolicyGlobalClassifyIpPrecedenceSupported 1.3.6.1.4.1.89.59.9.9 truthvalue read-only
Indicates if the system support classification according ip precedence most significant 3 bits in the TOS byte
           rlPolicyGlobalDeviceShapingTypeSupported 1.3.6.1.4.1.89.59.9.10 integer read-only
Indicates the shaper shaper type supported for the device Enumeration: 'queueShaper': 2, 'notSupported': 4, 'portShaper': 1, 'portAndQueueShaper': 3.
           rlPolicyGlobalDscpRemarkingSupported 1.3.6.1.4.1.89.59.9.11 truthvalue read-only
Indicates if dscp remarking supported for the device
           rlPolicyGlobalqueueSchedulerPerDeviceOrPort 1.3.6.1.4.1.89.59.9.12 integer read-only
indicates if the system support scheduling configuration per port or per device. device (1 ) or port (2) Enumeration: 'device': 1, 'port': 2.
       rlPolicyMapping 1.3.6.1.4.1.89.59.10
             rlPolicyDscpServiceClassTable 1.3.6.1.4.1.89.59.10.1 no-access
This table specifies The DSCP to ServiceClass map table
                 rlPolicyDscpServiceClassEntry 1.3.6.1.4.1.89.59.10.1.1 no-access
Each entry in this table describes The ServiceClass assigned to a Dscp value. The index is DSCP represent by rlPolicyDscpIndex
                     rlPolicyDscpIndex 1.3.6.1.4.1.89.59.10.1.1.1 integer read-only
DSCP value.
                     rlPolicyServiceClassValue 1.3.6.1.4.1.89.59.10.1.1.2 integer read-write
ServiceClass value.
                     rlPolicyDscpServiceClassStatus 1.3.6.1.4.1.89.59.10.1.1.3 rowstatus read-write
The status of a table entry. It is used to delete/Add an entry from this table.
             rlPolicyTcpUdpPortServiceClassTable 1.3.6.1.4.1.89.59.10.2 no-access
This table specifies TCP/UDP Port to ServiceClass map table
                 rlPolicyTcpUdpPortServiceClassEntry 1.3.6.1.4.1.89.59.10.2.1 no-access
Each entry in this table describes The ServiceClass Value. The index is TCP/UDP port represent by rlPolicyTcpUdpPort
                     rlPolicyProtocolType 1.3.6.1.4.1.89.59.10.2.1.1 l4prottype read-only
TCP/UDP port type.
                     rlPolicyTcpUdpPort 1.3.6.1.4.1.89.59.10.2.1.2 integer read-only
TCP/UDP port number.
                     rlPolicyMappedServiceClass 1.3.6.1.4.1.89.59.10.2.1.3 integer read-write
ServiceClass value.
                     rlPolicyTcpUdpPortServiceClassStatus 1.3.6.1.4.1.89.59.10.2.1.4 rowstatus read-write
The status of a table entry. It is used to delete/Add an entry from this table.
             rlPolicyDscpRemarkTable 1.3.6.1.4.1.89.59.10.3 no-access
This table specifies The DSCP Remark table
                 rlPolicyDscpRemarkEntry 1.3.6.1.4.1.89.59.10.3.1 no-access
Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlPolicyOldDscp
                     rlPolicyRmOldDscp 1.3.6.1.4.1.89.59.10.3.1.1 integer read-only
Old DSCP.
                     rlPolicyRmNewDscp 1.3.6.1.4.1.89.59.10.3.1.2 integer read-write
New DSCP.
                     rlPolicyDscpRemarkStatus 1.3.6.1.4.1.89.59.10.3.1.3 rowstatus read-write
The status of a table entry. It is used to delete/Add an entry from this table.
             rlPolicyDscpMutationTable 1.3.6.1.4.1.89.59.10.4 no-access
This table specifies The DSCP Mutation table
                 rlPolicyDscpMutationEntry 1.3.6.1.4.1.89.59.10.4.1 no-access
Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlPolicyOldDscp
                     rlPolicyOldDscp 1.3.6.1.4.1.89.59.10.4.1.1 integer read-only
Old DSCP.
                     rlPolicyNewDscp 1.3.6.1.4.1.89.59.10.4.1.2 integer read-write
New DSCP.
                     rlPolicyDscpMutationStatus 1.3.6.1.4.1.89.59.10.4.1.3 rowstatus read-write
The status of a table entry. It is used to delete/Add an entry from this table.
             rlPolicyTrustModeTable 1.3.6.1.4.1.89.59.10.5 no-access
This table specifies the port state for the trusted basic mode
                 rlPolicyTrustModeEntry 1.3.6.1.4.1.89.59.10.5.1 no-access
describes the ports status that belongs to the global trusted state
                     rlPolicyTrustModePortNumber 1.3.6.1.4.1.89.59.10.5.1.1 integer read-only
phisical port number .
                     rlPolicyTrustModePortState 1.3.6.1.4.1.89.59.10.5.1.2 integer read-write
the port state for the trusted mode. the port can be enabled or disabled for the basic trust mode Enumeration: 'disabled': 2, 'enabled': 1.
             rlPolicyDscpVptTable 1.3.6.1.4.1.89.59.10.6 no-access
This table specifies The DSCP to VPT map table
                 rlPolicyDscpVptEntry 1.3.6.1.4.1.89.59.10.6.1 no-access
Each entry in this table describes The VPT assigned to a Dscp value. The index is DSCP represent by rlPolicyDscpValue.
                     rlPolicyDscpValue 1.3.6.1.4.1.89.59.10.6.1.1 integer read-only
DSCP value.
                     rlPolicyVptValue 1.3.6.1.4.1.89.59.10.6.1.2 integer read-write
VPT value.
                     rlPolicyDscpVptStatus 1.3.6.1.4.1.89.59.10.6.1.3 rowstatus read-write
The status of a table entry. It is used to delete/Add an entry from this table.
             rlPolicyDscpToDpTable 1.3.6.1.4.1.89.59.10.7 no-access
This table specifies The DSCP To Dp table
                 rlPolicyDscpToDpEntry 1.3.6.1.4.1.89.59.10.7.1 no-access
Each entry in this table describes the new DP for the packet. The index is DSCP represent by rlPolicyDscp
                     rlPolicyDscp 1.3.6.1.4.1.89.59.10.7.1.1 integer read-only
Packet DSCP.
                     rlPolicyDp 1.3.6.1.4.1.89.59.10.7.1.2 integer read-write
New DP.
                     rlPolicyDscpToDpStatus 1.3.6.1.4.1.89.59.10.7.1.3 rowstatus read-write
The status of a table entry. It is used to delete/Add an entry from this table.
       rlPolicyDefaultForwardingTable 1.3.6.1.4.1.89.59.11 no-access
This table specifies The default forwarding values : permit or deny for list of specific ports , vlans
             rlPolicyDefaultForwardingEntry 1.3.6.1.4.1.89.59.11.1 no-access
Since the table is search to find match according to first match Entries with specific protocol should be set before entries for entire layer.
                 rlPolicyDefaultForwardingIndex 1.3.6.1.4.1.89.59.11.1.1 integer read-only
Default Forwarding Index.
                 rlPolicyDefaultForwardingPortList 1.3.6.1.4.1.89.59.11.1.2 portlist read-write
Default Forwarding Port List.
                 rlPolicyDefaultForwardingVlanId1To1024 1.3.6.1.4.1.89.59.11.1.3 vlanlist1 read-write
Default Forwarding VlanId List 1.
                 rlPolicyDefaultForwardingVlanId1025To2048 1.3.6.1.4.1.89.59.11.1.4 vlanlist2 read-write
Default Forwarding VlanId List 2.
                 rlPolicyDefaultForwardingVlanId2049To3072 1.3.6.1.4.1.89.59.11.1.5 vlanlist3 read-write
Default Forwarding VlanId List 3.
                 rlPolicyDefaultForwardingVlanId3073To4096 1.3.6.1.4.1.89.59.11.1.6 vlanlist4 read-write
Default Forwarding VlanId List 4.
                 rlPolicyDefaultForwardingLayer 1.3.6.1.4.1.89.59.11.1.7 integer read-write
Default Forwarding Action specify layer l2 l3 l3-ipv6 Enumeration: 'l3-ipv6': 3, 'l2': 1, 'l3': 2.
                 rlPolicyDefaultForwardingAction 1.3.6.1.4.1.89.59.11.1.8 integer read-write
Default Forwarding Action specify permit or deny Enumeration: 'deny': 2, 'permit': 1.
                 rlPolicyDefaultForwardingStatus 1.3.6.1.4.1.89.59.11.1.9 rowstatus read-write
The status of a table entry. It is used to delete/Add an entry from this table.
                 rlPolicyDefaultForwardingProtocol 1.3.6.1.4.1.89.59.11.1.10 integer read-write
The protocol type to be applied with the default action. Enumeration: 'icmpv6': 2, 'none': 255, 'bpd': 1.
       rlPolicyStatistics 1.3.6.1.4.1.89.59.12
             rlPolicyPortPolicyStatisticsTable 1.3.6.1.4.1.89.59.12.1 no-access
This table specifies statistics counter for policies with specific actions
                 rlPolicyPortPolicyStatisticsEntry 1.3.6.1.4.1.89.59.12.1.1 no-access
Each entry in this table describes counter per port. The index is port represent by rlIfIndex. In each entry represents counter, it's type , it's size and whether it's enabled.
                     rlPolicyPortPolicyStatisticsIfIndex 1.3.6.1.4.1.89.59.12.1.1.1 integer read-write
Interface index.
                     rlPolicyPortPolicyStatisticsCntrType 1.3.6.1.4.1.89.59.12.1.1.2 statisticscntrtype read-only
Counter type.
                     rlPolicyPolicyStatisticsCntrSize 1.3.6.1.4.1.89.59.12.1.1.3 statisticscntrnumofbitstype read-only
Counter size in bits.
                     rlPolicyPolicyStatisticsEnableCounting 1.3.6.1.4.1.89.59.12.1.1.4 truthvalue read-write
Indication whether the counter is enabled.
                     rlPolicyPolicyStatisticsCounterValue 1.3.6.1.4.1.89.59.12.1.1.5 counter64 read-only
Counter value.
             rlPolicyOutQueueStatisticsTable 1.3.6.1.4.1.89.59.12.2 no-access
Each entry in this table describes counter per any permutation of Port/VLAN/Queue/Drop Precedence . Each of the above can a group off 'All'. The index is port represent by rlPolicyOutQueueStatisticsCountrID. In each entry there are fields representing whether the counter is enabled and counters value.
                 rlPolicyOutQueueStatisticsEntry 1.3.6.1.4.1.89.59.12.2.1 no-access
Each entry includes port, vlan, queue, drop precedence and counter value.
                     rlPolicyOutQueueStatisticsCountrID 1.3.6.1.4.1.89.59.12.2.1.1 integer read-only
Counter id, the key of the table.
                     rlPolicyOutQueueStatisticsIfIndexList 1.3.6.1.4.1.89.59.12.2.1.2 portlist read-write
Port for which the flow is counted.
                     rlPolicyOutQueueStatisticsPortAll 1.3.6.1.4.1.89.59.12.2.1.3 truthvalue read-write
Indication for whether the port is configured as range of all the ports
                     rlPolicyOutQueueStatisticsVlan 1.3.6.1.4.1.89.59.12.2.1.4 integer read-write
VLAN for which the flow is counted.
                     rlPolicyOutQueueStatisticsVlanAll 1.3.6.1.4.1.89.59.12.2.1.5 truthvalue read-write
Indication for whether the Vlan is configured as range of all the Vlans
                     rlPolicyOutQueueStatisticsQueue 1.3.6.1.4.1.89.59.12.2.1.6 integer read-write
Queue for which the flow is counted.
                     rlPolicyOutQueueStatisticsQueueAll 1.3.6.1.4.1.89.59.12.2.1.7 truthvalue read-write
Indication for whether the Queue is configured as range of all the Queues
                     rlPolicyOutQueueStatisticsDP 1.3.6.1.4.1.89.59.12.2.1.8 statisticsdptype read-write
Drop Precedence for which the flow is counted.
                     rlPolicyOutQueueStatisticsDPAll 1.3.6.1.4.1.89.59.12.2.1.9 truthvalue read-write
Indication for whether the DP is configured as range of all the DPs
                     rlPolicyOutQueueStatisticsCounterTailDropValue 1.3.6.1.4.1.89.59.12.2.1.10 counter64 read-only
The counter for tail dropped value.
                     rlPolicyOutQueueStatisticsCounterAllValue 1.3.6.1.4.1.89.59.12.2.1.11 counter64 read-only
The counter for all traffic value.
                     rlPolicyOutQueueStatisticsCntrNumOfBits 1.3.6.1.4.1.89.59.12.2.1.12 statisticscntrnumofbitstype read-only
Counter size in bits for the counter.
                     rlPolicyOutQueueStatisticsStatus 1.3.6.1.4.1.89.59.12.2.1.13 rowstatus read-write
The status of a table entry. It is used to delete an entry from this table.
             rlPolicyGlobalStatisticsCntrsTable 1.3.6.1.4.1.89.59.12.3 no-access
This table specifies statistics global counters for specific rules for all ports that they are connected to
                 rlPolicyGlobalStatisticsCntrsEntry 1.3.6.1.4.1.89.59.12.3.1 no-access
Each entry represents global counter.
                     rlPolicyGlobalStatisticsCntrsType 1.3.6.1.4.1.89.59.12.3.1.1 statisticscntrtype read-only
Counter type.
                     rlPolicyGlobalStatisticsCntrsNumOfBits 1.3.6.1.4.1.89.59.12.3.1.2 statisticscntrnumofbitstype read-only
Counter size in bits.
                     rlPolicyGlobalStatisticsCntrsCounterValue 1.3.6.1.4.1.89.59.12.3.1.3 counter64 read-only
Counter value.
                     rlPolicyGlobalStatisticsStatus 1.3.6.1.4.1.89.59.12.3.1.4 rowstatus read-write
The status of a table entry. It is used to delete an entry from this table.
             rlPolicyClearCounters 1.3.6.1.4.1.89.59.12.4 integer read-write
This scalar indicates to clear all the counters.
       rlPolicyClassifierUtilization 1.3.6.1.4.1.89.59.13
             rlPolicyClassifierUtilizationTable 1.3.6.1.4.1.89.59.13.1 no-access
A table containing Classifier utilization information. Each row represents objects for a particular Unit present in this system.
                 rlPolicyClassifierUtilizationEntry 1.3.6.1.4.1.89.59.13.1.1 no-access
A Single entry containing Classifier utilization information.
                     rlPolicyClassifierUtilizationUnitId 1.3.6.1.4.1.89.59.13.1.1.1 unsigned32 no-access
The Unit ID of this Classifier. must be unique per entry. This is an index into the table.
                     rlPolicyClassifierUtilizationPercent 1.3.6.1.4.1.89.59.13.1.1.2 unsigned32 read-only
The classifier utilization percentage.
                     rlPolicyClassifierUtilizationRulesNumber 1.3.6.1.4.1.89.59.13.1.1.3 unsigned32 read-only
The classifier utilization number of used rules, in short rules resolution.
       rlPolicyIsTCAvailable 1.3.6.1.4.1.89.59.14 unsigned32 read-only
This scalar indicates the number of currently reserved amount of traffic conditioners.
       rlPolicyCPUSafeGuardEnable 1.3.6.1.4.1.89.59.15 integer read-write
This scalar enables/disables CPU Safeguard.
       rlPolicyQosModeGlobalCfgTable 1.3.6.1.4.1.89.59.16 no-access
This table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode.
             rlPolicyQosModeGlobalCfgEntry 1.3.6.1.4.1.89.59.16.1 no-access
This table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode. Current implemnetaion assumes only one entry exist.
                 rlPolicyGlobalIndex 1.3.6.1.4.1.89.59.16.1.1 integer no-access
Entry index - currenly only one entry can exist, indexes hard coded with value '1'.
                 rlPolicyGlobalQoSMode 1.3.6.1.4.1.89.59.16.1.2 rlpolicyqosmode read-write
This field replaces deprecated scalar rlPolicyCliQosMode. Defines the global qos operation mode: disable, basic or advnaced.
                 rlPolicyBasicGlobalTrustMode 1.3.6.1.4.1.89.59.16.1.3 rlpolicytrusttypes read-write
This field replaces deprecated scalar rlPolicyCliBasicModeCfg. Defines the global qos trust operation mode when qos mode is basic.
                 rlPolicyAdvcGlobalTrustMode 1.3.6.1.4.1.89.59.16.1.4 rlpolicytrusttypes read-write
This field replaces deprecated scalar rlPolicyCliBasicModeCfg. Defines the global qos trust operation mode when qos mode is advanced.
                 rlPolicyPortTrustAdvancedMode 1.3.6.1.4.1.89.59.16.1.5 truthvalue read-write
This field specified whether ports are set to trused or not-trusted by default when switching to qos advanced mode.
                 rlPolicyDscpMutationEnable 1.3.6.1.4.1.89.59.16.1.6 truthvalue read-write
This field indicates if dscp to dscp mutation mode is enable. It can be set to true in the following terms: 1.rlQosGlobalTrustMode is in {dscp, vpt-dscp} ( rlQosGlobalQoSMode must be basic or advanced) 2.if rlQosGlobalQoSMode is advanced then rlQoSPortTrustAdvancedMode must be set to true.
                 rlPolicyModeGlobalCfgStatus 1.3.6.1.4.1.89.59.16.1.7 rowstatus read-write
This status of entry action. In current implementation only one entry exist, therefor only status = active is acceptable.