Dell-BRIDGEMIBOBJECTS-MIB: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: Dell-BRIDGEMIBOBJECTS-MIB
Download as:   
SNMPv2-CONF, IF-MIB, Dell-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, Q-BRIDGE-MIB, BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rlpBridgeMIBObjects 1.3.6.1.4.1.89.57
This private MIB module defines bridge MIB objects private MIBs.
       rldot1dPriority 1.3.6.1.4.1.89.57.1
           rldot1dPriorityMibVersion 1.3.6.1.4.1.89.57.1.1 integer read-only
MIB's version, the current version is 1.
           rldot1dPriorityPortGroupTable 1.3.6.1.4.1.89.57.1.2 no-access
A list of PortGroupNumber for each port.
               rldot1dPriorityPortGroupEntry 1.3.6.1.4.1.89.57.1.2.1 no-access
All ports belonging to a same group have the same User Priority to Traffic Class mapping.
                   rldot1dPriorityPortGroupNumber 1.3.6.1.4.1.89.57.1.2.1.1 integer read-only
A group, that port belongs to. All ports belonging to a same group have the same User Priority to Traffic Class mapping.
       rldot1dStp 1.3.6.1.4.1.89.57.2
           rldot1dStpMibVersion 1.3.6.1.4.1.89.57.2.1 integer read-only
MIB's version, the current version is 2.
           rldot1dStpType 1.3.6.1.4.1.89.57.2.2 integer read-only
Specifies whether the device supports Spanning Tree per device, or per group. Enumeration: 'mstp': 4, 'perDevice': 1.
           rldot1dStpEnable 1.3.6.1.4.1.89.57.2.3 truthvalue read-write
Enable / Disable spanning tree. When working in per vlan mode enable / disable STP per all vlans.
           rldot1dStpPortMustBelongToVlan 1.3.6.1.4.1.89.57.2.4 truthvalue read-write
Specifies whether a port must belong to a VLAN in order to participate in the STP.
           rldot1dStpExtendedPortNumberFormat 1.3.6.1.4.1.89.57.2.5 truthvalue read-write
Specifies whether the STP uses the extended port fnumber format.
           rldot1dStpVlanTable 1.3.6.1.4.1.89.57.2.6 no-access
A table that contains vlan-specific information for the Spanning Tree Protocol.
               rldot1dStpVlanEntry 1.3.6.1.4.1.89.57.2.6.1 no-access
A list of information maintained by every Vlan about the Spanning Tree Protocol state for that Vlan.
                   rldot1dStpVlan 1.3.6.1.4.1.89.57.2.6.1.1 integer read-only
The Vlan index.
                   rldot1dStpVlanEnable 1.3.6.1.4.1.89.57.2.6.1.2 truthvalue read-write
Specifies whether this vlan is STP enable or disable
                   rldot1dStpTimeSinceTopologyChange 1.3.6.1.4.1.89.57.2.6.1.3 timeticks read-only
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
                   rldot1dStpTopChanges 1.3.6.1.4.1.89.57.2.6.1.4 counter read-only
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
                   rldot1dStpDesignatedRoot 1.3.6.1.4.1.89.57.2.6.1.5 bridgeid read-only
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
                   rldot1dStpRootCost 1.3.6.1.4.1.89.57.2.6.1.6 integer read-only
The cost of the path to the root as seen from this bridge.
                   rldot1dStpRootPort 1.3.6.1.4.1.89.57.2.6.1.7 integer read-only
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
                   rldot1dStpMaxAge 1.3.6.1.4.1.89.57.2.6.1.8 timeout read-only
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
                   rldot1dStpHelloTime 1.3.6.1.4.1.89.57.2.6.1.9 timeout read-only
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
                   rldot1dStpHoldTime 1.3.6.1.4.1.89.57.2.6.1.10 integer read-only
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
                   rldot1dStpForwardDelay 1.3.6.1.4.1.89.57.2.6.1.11 timeout read-only
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
           rldot1dStpVlanPortTable 1.3.6.1.4.1.89.57.2.7 no-access
A table that contains pair specific information for the Spanning Tree Protocol.
               rldot1dStpVlanPortEntry 1.3.6.1.4.1.89.57.2.7.1 no-access
A list of information maintained by every pair about the Spanning Tree Protocol state for that pair.
                   rldot1dStpVlanPortVlan 1.3.6.1.4.1.89.57.2.7.1.1 integer read-only
The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information.
                   rldot1dStpVlanPortPort 1.3.6.1.4.1.89.57.2.7.1.2 integer read-only
The port number of the port for which this entry contains Spanning Tree Protocol management information.
                   rldot1dStpVlanPortPriority 1.3.6.1.4.1.89.57.2.7.1.3 integer read-write
The value of the priority field which is contained in the more significant 4 bits of the most significant octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of rldot1dStpVlanPort.
                   rldot1dStpVlanPortState 1.3.6.1.4.1.89.57.2.7.1.4 integer read-only
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpVlanPortEnable), this object will have a value of disabled(1). Enumeration: 'listening': 3, 'disabled': 1, 'broken': 6, 'learning': 4, 'forwarding': 5, 'blocking': 2.
                   rldot1dStpVlanPortEnable 1.3.6.1.4.1.89.57.2.7.1.5 integer read-write
The enabled/disabled status of the port. Enumeration: 'disabled': 2, 'enabled': 1.
                   rldot1dStpVlanPortPathCost 1.3.6.1.4.1.89.57.2.7.1.6 integer read-write
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
                   rldot1dStpVlanPortDesignatedRoot 1.3.6.1.4.1.89.57.2.7.1.7 bridgeid read-only
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
                   rldot1dStpVlanPortDesignatedCost 1.3.6.1.4.1.89.57.2.7.1.8 integer read-only
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
                   rldot1dStpVlanPortDesignatedBridge 1.3.6.1.4.1.89.57.2.7.1.9 bridgeid read-only
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
                   rldot1dStpVlanPortDesignatedPort 1.3.6.1.4.1.89.57.2.7.1.10 octet string read-only
The Port Identifier of the port on the Designated Bridge for this port's segment.
                   rldot1dStpVlanPortForwardTransitions 1.3.6.1.4.1.89.57.2.7.1.11 counter read-only
The number of times this port has transitioned from the Learning state to the Forwarding state.
           rldot1dStpTrapVariable 1.3.6.1.4.1.89.57.2.8
               rldot1dStpTrapVrblifIndex 1.3.6.1.4.1.89.57.2.8.1 interfaceindex read-only
The ifIndex of port which STP status was changed
               rldot1dStpTrapVrblVID 1.3.6.1.4.1.89.57.2.8.2 integer read-only
The VID of VLAN to which the port belongs which STP status was changed
           rldot1dStpTypeAfterReset 1.3.6.1.4.1.89.57.2.9 integer read-write
New mode of spaning tree supported by the device after the next reset. Enumeration: 'mstp': 4, 'perDevice': 1.
           rldot1dStpMonitorTime 1.3.6.1.4.1.89.57.2.10 integer read-write
Factor of hello-time during which a port is monotored to determine if it is stable.
           rldot1dStpBpduCount 1.3.6.1.4.1.89.57.2.11 integer read-write
The number of bpdu that need to received for the link to be considered stable.
           rldot1dStpLastChanged 1.3.6.1.4.1.89.57.2.12 timeticks read-only
The last time any object in this table was changed by SNMP or other local management means.
           rldot1dStpPortTable 1.3.6.1.4.1.89.57.2.13 no-access
A table that contains extended pair port specific information.
                 rldot1dStpPortEntry 1.3.6.1.4.1.89.57.2.13.1 no-access
A list of information maintained by every port about the Spanning Tree Protocol state for that port.
                     rldot1dStpPortPort 1.3.6.1.4.1.89.57.2.13.1.1 integer read-only
The port number of the port for which this entry contains Spanning Tree Protocol management information.
                     rldot1dStpPortDampEnable 1.3.6.1.4.1.89.57.2.13.1.2 truthvalue read-write
Specified if dampening is enabled on this port.
                     rldot1dStpPortDampStable 1.3.6.1.4.1.89.57.2.13.1.3 truthvalue read-only
Specified if the port is stable.
                     rldot1dStpPortFilterBpdu 1.3.6.1.4.1.89.57.2.13.1.4 integer read-write
Specified if this port should filter bpdus when stp is disabled. Enumeration: 'true': 1, 'none': 2, 'false': 0.
                     rldot1dStpPortBpduSent 1.3.6.1.4.1.89.57.2.13.1.5 counter32 read-only
Specified the number of bpdu sent from this port.
                     rldot1dStpPortBpduReceived 1.3.6.1.4.1.89.57.2.13.1.6 counter32 read-only
Specified the number of bpdu received in this port.
                     rldot1dStpPortRole 1.3.6.1.4.1.89.57.2.13.1.7 integer read-only
Specified the role of this this port. Enumeration: 'unknown': 0, 'alternate': 2, 'designated': 5, 'disabled': 1, 'root': 4, 'backup': 3.
                     rldot1dStpBpduType 1.3.6.1.4.1.89.57.2.13.1.8 integer read-only
Specified the type of BPDU transmitted by this port. Enumeration: 'stp': 0, 'rstp': 1.
                     rldot1dStpPortRestrictedRole 1.3.6.1.4.1.89.57.2.13.1.9 truthvalue read-write
If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even if it has the best spanning tree priority vector. Such a Port will be selected as an Alternate Port after the Root Port has been selected.
                     rldot1dStpPortAutoEdgePort 1.3.6.1.4.1.89.57.2.13.1.10 truthvalue read-write
If TRUE causes the Port when become up, to enter the blocking state, and if during 3 seconds it doesn't receive a BPDU, it will enter the forwarding state.
                     rldot1dStpPortLoopback 1.3.6.1.4.1.89.57.2.13.1.11 truthvalue read-only
Specified loopback was detected on port. Usable for only a short period of time if stp loopback guard is enabled (since port enters into shutdown state).
                     rldot1dStpPortBpduOperStatus 1.3.6.1.4.1.89.57.2.13.1.12 integer read-only
Specified BPDU handling operative status for port. Enumeration: 'filter': 0, 'flood': 1, 'stp': 3, 'bridge': 2.
           rldot1dStpPortsEnable 1.3.6.1.4.1.89.57.2.14 truthvalue read-only
Enable / Disable spanning tree on ports by default .
           rldot1dStpTaggedFlooding 1.3.6.1.4.1.89.57.2.15 truthvalue read-only
flooding can be done in tagged bpdu .
           rldot1dStpPortBelongToVlanDefault 1.3.6.1.4.1.89.57.2.16 truthvalue read-only
The default value of rldot1dStpPortMustBelongToVlan .
           rldot1dStpEnableByDefault 1.3.6.1.4.1.89.57.2.17 truthvalue read-only
The default value of rldot1dStpEnable .
           rldot1dStpPortToDefault 1.3.6.1.4.1.89.57.2.18 integer read-write
To order port/s to revert to default setings .
           rldot1dStpSupportedType 1.3.6.1.4.1.89.57.2.19 integer read-only
The type of stp supported by the device. Enumeration: 'mstp': 3, 'perVlan': 2, 'perDevice': 1.
           rldot1dStpEdgeportSupportInStp 1.3.6.1.4.1.89.57.2.20 truthvalue read-only
If EdgePort is supported in stpCompatible mode .
           rldot1dStpFilterBpdu 1.3.6.1.4.1.89.57.2.21 truthvalue read-write
Specified if the device should filter BPDUs when STP is disabled.
           rldot1dStpFloodBpduMethod 1.3.6.1.4.1.89.57.2.22 integer read-write
Specified flooding method: 1 - classic - untagged to all stp disabled ports 2 - bridging -normal bridging. Enumeration: 'bridging': 1, 'classic': 0.
           rldot1dStpSeparatedBridges 1.3.6.1.4.1.89.57.2.23
                 rldot1dStpSeparatedBridgesTable 1.3.6.1.4.1.89.57.2.23.1 no-access
Define if separated bridges feature is enabled for each interface.
                     rldot1dStpSeparatedBridgesEntry 1.3.6.1.4.1.89.57.2.23.1.1 no-access
Defines the contents of each line in the rlSeparatedBridgesTable table.
                         rldot1dStpSeparatedBridgesPortEnable 1.3.6.1.4.1.89.57.2.23.1.1.1 truthvalue read-write
This variable indicates whether the separated bridge feature is enabled on a specified ifIndex.
                 rldot1dStpSeparatedBridgesEnable 1.3.6.1.4.1.89.57.2.23.2 truthvalue read-write
Enable / Disable Separated Bridges Feature.
                 rldot1dStpSeparatedBridgesAutoConfig 1.3.6.1.4.1.89.57.2.23.3 truthvalue read-write
Enable / Disable Separated Bridges Automatic Configuration.
           rldot1dStpPortBpduGuardTable 1.3.6.1.4.1.89.57.2.24 no-access
A table that contains for each port whether it is bpdu guard .
                 rldot1dStpPortBpduGuardEntry 1.3.6.1.4.1.89.57.2.24.1 no-access
A list of information maintained by every port whether it is bpdu guard.
                     rldot1dStpPortBpduGuardEnable 1.3.6.1.4.1.89.57.2.24.1.1 truthvalue read-write
Specified if bpdu guard is enabled on this port.
           rldot1dStpLoopbackGuardEnable 1.3.6.1.4.1.89.57.2.25 truthvalue read-write
Define if STP loopback guard feature is globally enabled.
           rldot1dStpDisabledPortStateTable 1.3.6.1.4.1.89.57.2.26 no-access
Define stp port state for each stp disabled interface. This is auxiliary MIB emulates stp enabled port behaviour in ASIC for stp disabled port. The MIB contains only stp disabled ports entries
                 rldot1dStpDisabledPortStateEntry 1.3.6.1.4.1.89.57.2.26.1 no-access
Defines the contents of each line in the rldot1dStpDisabledPortStateTable table.
                     rldot1dStpDisabledPortState 1.3.6.1.4.1.89.57.2.26.1.1 integer read-write
The port's stp state as defined by external application . This state controls what action a port takes on reception of a frame. Enumeration: 'learning': 4, 'forwarding': 5, 'blocking': 2, 'listening': 3.
       rldot1dExtBase 1.3.6.1.4.1.89.57.3
           rldot1dExtBaseMibVersion 1.3.6.1.4.1.89.57.3.1 integer read-only
MIB's version, the current version is 1.
           rldot1dDeviceCapabilities 1.3.6.1.4.1.89.57.3.2 octet string read-only
Indicates the optional parts of private extension of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB. Capabilities that are allowed on a per-port basis are indicated in dot1dPortCapabilities.
       rldot1wRStp 1.3.6.1.4.1.89.57.4
           rldot1wRStpVlanEdgePortTable 1.3.6.1.4.1.89.57.4.1 no-access
A table that contains pair specific information for the Rapid Spanning Tree Protocol.
               rldot1wRStpVlanEdgePortEntry 1.3.6.1.4.1.89.57.4.1.1 no-access
A list of information maintained by every pair about the RAPID Spanning Tree Protocol state for that pair.
                   rldot1wRStpVlanEdgePortVlan 1.3.6.1.4.1.89.57.4.1.1.1 integer read-only
The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information, If STP per device then only one value of 1 is allowed. If STP per a VLAN then all value of 1..4095 are allowed.
                   rldot1wRStpVlanEdgePortPort 1.3.6.1.4.1.89.57.4.1.1.2 integer read-only
The port number of the port for which this entry contains Spanning Tree Protocol management information.
                   rldot1wRStpEdgePortStatus 1.3.6.1.4.1.89.57.4.1.1.3 truthvalue read-write
Specifies whether this port is an Edge Port or not
           rldot1wRStpForceVersionTable 1.3.6.1.4.1.89.57.4.2 no-access
A table that contains specific information for the Rapid Spanning Tree Protocol.
               rldot1wRStpForceVersionEntry 1.3.6.1.4.1.89.57.4.2.1 no-access
A list of information maintained by every about the RAPID Spanning Tree Protocol state for that pair.
                   rldot1wRStpForceVersionVlan 1.3.6.1.4.1.89.57.4.2.1.1 integer read-only
The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information, If STP per device then only one value of 1 is allowed. If STP per a VLAN then all value of 1..4095 are allowed.
                   rldot1wRStpForceVersionState 1.3.6.1.4.1.89.57.4.2.1.2 integer read-write
Specifies whether this Bridge uses the normal RSTP algorithm, or STP Compatibility algorythm: 0 - STP Compatibility 2 - Normal RSTP
       rldot1pPriorityMap 1.3.6.1.4.1.89.57.5
           rldot1pPriorityMapState 1.3.6.1.4.1.89.57.5.1 integer read-write
enable / disable Enumeration: 'enable': 1, 'disable': 2.
           rldot1pPriorityMapTable 1.3.6.1.4.1.89.57.5.2 no-access
This table hold information the priority maps
               rldot1pPriorityMapEntry 1.3.6.1.4.1.89.57.5.2.1 no-access
The row definition for this table.
                   rldot1pPriorityMapName 1.3.6.1.4.1.89.57.5.2.1.1 displaystring read-only
The map name
                   rldot1pPriorityMapPriority 1.3.6.1.4.1.89.57.5.2.1.2 octet string read-only
The map holding the queue
                   rldot1pPriorityMapPort 1.3.6.1.4.1.89.57.5.2.1.3 portlist read-only
the port that the map, is applied on in config
                   rldot1pPriorityMapPortList 1.3.6.1.4.1.89.57.5.2.1.4 portlist read-only
the ports that the map, is applied on in actual
                   rldot1pPriorityMapStatus 1.3.6.1.4.1.89.57.5.2.1.5 rowstatus read-only
The status of the table entry. It's used to delete an entry
       rldot1sMstp 1.3.6.1.4.1.89.57.6
           rldot1sMstpInstanceTable 1.3.6.1.4.1.89.57.6.1 no-access
A table that contains Mstp instance specific information for the Multiple Spanning Tree Protocol.
               rldot1sMstpInstanceEntry 1.3.6.1.4.1.89.57.6.1.1 no-access
A list of information maintained by every instance about the multiple Spanning Tree Protocol state for that instance.
                   rldot1sMstpInstanceId 1.3.6.1.4.1.89.57.6.1.1.1 integer read-only
The Instance index.
                   rldot1sMstpInstanceEnable 1.3.6.1.4.1.89.57.6.1.1.2 truthvalue read-only
Specifies whether this Instance is STP enable or disable
                   rldot1sMstpInstanceTimeSinceTopologyChange 1.3.6.1.4.1.89.57.6.1.1.3 timeticks read-only
The time (in hundredths of a second) since the last time a topology change was detected by the Mstp Instance .
                   rldot1sMstpInstanceTopChanges 1.3.6.1.4.1.89.57.6.1.1.4 counter read-only
The total number of topology changes detected by this Instance since the management entity was last reset or initialized.
                   rldot1sMstpInstanceDesignatedRoot 1.3.6.1.4.1.89.57.6.1.1.5 bridgeid read-only
The bridge identifier of the root of the spanning tree as determined by the Muliple Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
                   rldot1sMstpInstanceRootCost 1.3.6.1.4.1.89.57.6.1.1.6 integer read-only
The cost of the path to the root as seen from this bridge.
                   rldot1sMstpInstanceRootPort 1.3.6.1.4.1.89.57.6.1.1.7 integer read-only
The port number of the port which offers the lowest cost path from this bridge to the root bridge.
                   rldot1sMstpInstanceMaxAge 1.3.6.1.4.1.89.57.6.1.1.8 timeout read-only
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
                   rldot1sMstpInstanceHelloTime 1.3.6.1.4.1.89.57.6.1.1.9 timeout read-only
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
                   rldot1sMstpInstanceHoldTime 1.3.6.1.4.1.89.57.6.1.1.10 integer read-only
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
                   rldot1sMstpInstanceForwardDelay 1.3.6.1.4.1.89.57.6.1.1.11 timeout read-only
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.]
                   rldot1sMstpInstancePriority 1.3.6.1.4.1.89.57.6.1.1.12 integer read-write
The value of the write-able portion of the Bridge ID, i.e., the first four bits of the first octet of the (8 octet long) Bridge ID.The value is a product of 4096. The next 12 bit are the msti id . The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.
                   rldot1sMstpInstanceRemainingHopes 1.3.6.1.4.1.89.57.6.1.1.13 integer read-only
This count value determines the amount of hopes the information transmited by this bridge on this instance can travel.
           rldot1sMstpInstancePortTable 1.3.6.1.4.1.89.57.6.2 no-access
A table that contains pair specific information for the Spanning Tree Protocol.
               rldot1sMstpInstancePortEntry 1.3.6.1.4.1.89.57.6.2.1 no-access
A list of information maintained by every pair about the Spanning Tree Protocol state for that pair.
                   rldot1sMstpInstancePortMstiId 1.3.6.1.4.1.89.57.6.2.1.1 integer read-only
The Vlan group number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information.
                   rldot1sMstpInstancePortPort 1.3.6.1.4.1.89.57.6.2.1.2 integer read-only
The port number of the port for which this entry contains Spanning Tree Protocol management information.
                   rldot1sMstpInstancePortPriority 1.3.6.1.4.1.89.57.6.2.1.3 integer read-write
The value of the priority field which is contained in the more significant 4 bits of the most significant octet of the (2 octet long) Port ID. The value is a product of 16. The other octet of the Port ID is given by the value of rldot1dStpVlanGroupPort.
                   rldot1sMstpInstancePortState 1.3.6.1.4.1.89.57.6.2.1.4 integer read-only
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpVlanPortEnable), this object will have a value of disabled(1). Enumeration: 'listening': 3, 'disabled': 1, 'broken': 6, 'learning': 4, 'forwarding': 5, 'blocking': 2.
                   rldot1sMstpInstancePortEnable 1.3.6.1.4.1.89.57.6.2.1.5 integer read-only
The enabled/disabled status of the port. Enumeration: 'disabled': 2, 'enabled': 1.
                   rldot1sMstpInstancePortPathCost 1.3.6.1.4.1.89.57.6.2.1.6 integer read-only
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
                   rldot1sMstpInstancePortDesignatedRoot 1.3.6.1.4.1.89.57.6.2.1.7 bridgeid read-only
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
                   rldot1sMstpInstancePortDesignatedCost 1.3.6.1.4.1.89.57.6.2.1.8 integer read-only
The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
                   rldot1sMstpInstancePortDesignatedBridge 1.3.6.1.4.1.89.57.6.2.1.9 bridgeid read-only
The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
                   rldot1sMstpInstancePortDesignatedPort 1.3.6.1.4.1.89.57.6.2.1.10 octet string read-only
The Port Identifier of the port on the Designated Bridge for this port's segment.
                   rldot1sMstpInstancePortForwardTransitions 1.3.6.1.4.1.89.57.6.2.1.11 counter read-only
The number of times this port has transitioned from the Learning state to the Forwarding state.
                   rldot1sMStpInstancePortAdminPathCost 1.3.6.1.4.1.89.57.6.2.1.12 integer read-write
The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. This complements the object dot1dStpPortPathCost, which returns the operational value of the path cost.
                   rldot1sMStpInstancePortRole 1.3.6.1.4.1.89.57.6.2.1.13 integer read-only
Specify the role of this this port. Enumeration: 'unknown': 0, 'alternate': 2, 'designated': 5, 'disabled': 1, 'master': 6, 'root': 4, 'backup': 3.
           rldot1sMstpMaxHopes 1.3.6.1.4.1.89.57.6.3 integer read-write
Max number of hopes that an MST BPDU will travel inside a region.
           rldot1sMstpConfigurationName 1.3.6.1.4.1.89.57.6.4 snmpadminstring read-only
The active configuration name as will be caried in MST BPDU's.
           rldot1sMstpRevisionLevel 1.3.6.1.4.1.89.57.6.5 integer read-only
The active revision level.
           rldot1sMstpVlanTable 1.3.6.1.4.1.89.57.6.6 no-access
A table that contains information about the alocation of vlans to groups.
               rldot1sMstpVlanEntry 1.3.6.1.4.1.89.57.6.6.1 no-access
A list of information maintained by every vlan about the group it belongs to.
                   rldot1sMstpVlan 1.3.6.1.4.1.89.57.6.6.1.1 integer read-only
The vlan number of the vlan for which this entry contains Spanning Tree Protocol management information.
                   rldot1sMstpGroup 1.3.6.1.4.1.89.57.6.6.1.2 integer read-only
Specifid the active group number this vlan belonges to.
                   rldot1sMstpPendingGroup 1.3.6.1.4.1.89.57.6.6.1.3 integer read-write
Specifid the pending group number this vlan belonges to.
           rldot1sMstpExtPortTable 1.3.6.1.4.1.89.57.6.7 no-access
A table that contains MSTP information about ports of the CIST.
               rldot1sMstpExtPortEntry 1.3.6.1.4.1.89.57.6.7.1 no-access
A list of information maintained by every port of the CIST.
                   rldot1sMstpExtPortPort 1.3.6.1.4.1.89.57.6.7.1.1 integer read-only
The port number of the port for which this entry contains Spanning Tree Protocol management information.
                   rldot1sMstpExtPortInternalOperPathCost 1.3.6.1.4.1.89.57.6.7.1.2 integer read-only
The contribution of this port to the path cost of paths towards the spanning tree regional root which include this port. 802.1S-2002 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
                   rldot1sMstpExtPortDesignatedRegionalRoot 1.3.6.1.4.1.89.57.6.7.1.3 bridgeid read-only
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
                   rldot1sMstpExtPortDesignatedRegionalCost 1.3.6.1.4.1.89.57.6.7.1.4 integer read-only
The regional path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
                   rldot1sMstpExtPortBoundary 1.3.6.1.4.1.89.57.6.7.1.5 truthvalue read-only
Indication if the port is conented to to a lan segment outside or inside the region.
                   rldot1sMstpExtPortInternalAdminPathCost 1.3.6.1.4.1.89.57.6.7.1.6 integer read-write
The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. This complements the object dot1dStpPortPathCost, which returns the operational value of the path cost.
           rldot1sMstpDesignatedMaxHopes 1.3.6.1.4.1.89.57.6.8 integer read-only
Max number of hopes that an MST BPDU will travel inside a region.
           rldot1sMstpRegionalRoot 1.3.6.1.4.1.89.57.6.9 bridgeid read-only
CIST Regional Root Identifier (13.16.4). The Bridge Identifier of the current CIST Regional Root.
           rldot1sMstpRegionalRootCost 1.3.6.1.4.1.89.57.6.10 integer read-only
The CIST path cost from the transmitting Bridge to the CIST Regional Root.
           rldot1sMstpPendingConfigurationName 1.3.6.1.4.1.89.57.6.11 snmpadminstring read-write
The pending configuration name.
           rldot1sMstpPendingRevisionLevel 1.3.6.1.4.1.89.57.6.12 integer read-write
The pending revision level.
           rldot1sMstpPendingAction 1.3.6.1.4.1.89.57.6.13 integer read-write
The action to be done with the pending configuration. copyPendingActive - to copy the pending mst configuration to the active one. copyActivePending - to copy the active mst configuration to the pending one. Enumeration: 'copyPendingActive': 1, 'copyActivePending': 2.
           rldot1sMstpRemainingHops 1.3.6.1.4.1.89.57.6.14 integer read-only
This count value determines the amount of hops the information transmitted by this bridge can travel.
           rldot1sMstpInstanceVlanTable 1.3.6.1.4.1.89.57.6.15 no-access
This table contains vlan lists per MSTP instances.
                 rldot1sMstpInstanceVlanEntry 1.3.6.1.4.1.89.57.6.15.1 no-access
The entry contains vlan lists per specific MSTP instance.
                     rldot1sMstpInstanceVlanId 1.3.6.1.4.1.89.57.6.15.1.1 integer read-only
Specifiy the instance number.
                     rldot1sMstpInstanceVlanId1To1024 1.3.6.1.4.1.89.57.6.15.1.2 vlanlist1 read-only
first VlanId List of specific MSTP instance.
                     rldot1sMstpInstanceVlanId1025To2048 1.3.6.1.4.1.89.57.6.15.1.3 vlanlist2 read-only
second VlanId List of specific MSTP instance.
                     rldot1sMstpInstanceVlanId2049To3072 1.3.6.1.4.1.89.57.6.15.1.4 vlanlist3 read-only
third VlanId List of specific MSTP instance.
                     rldot1sMstpInstanceVlanId3073To4094 1.3.6.1.4.1.89.57.6.15.1.5 vlanlist4 read-only
fourth VlanId List of specific MSTP instance.
       rldot1dTpAgingTime 1.3.6.1.4.1.89.57.7
           rldot1dTpAgingTimeMin 1.3.6.1.4.1.89.57.7.1 integer read-only
The min timeout period in seconds for aging out dynamically learned forwarding information.
           rldot1dTpAgingTimeMax 1.3.6.1.4.1.89.57.7.2 integer read-only
The max timeout period in seconds for aging out dynamically learned forwarding information.