DLB-802DOT11-EXT-MIB: View SNMP OID List / Download MIB

VENDOR: DELIBERANT


 Home MIB: DLB-802DOT11-EXT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-TC, IF-MIB, SNMPv2-MIB, SNMPv2-SMI, DELIBERANT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dlb802dot11ExtMIB 1.3.6.1.4.1.32761.3.5
The Deliberant 802.11 Extension MIB.
     dlb802dot11ExtMIBObjects 1.3.6.1.4.1.32761.3.5.1
         dlbDot11Notifs 1.3.6.1.4.1.32761.3.5.1.0
             dlbFrequencyChange 1.3.6.1.4.1.32761.3.5.1.0.1
This notification is sent on frequency change.
             dlbNoiseThresholdReached 1.3.6.1.4.1.32761.3.5.1.0.2
This notification is sent when noise becomes bigger than threshold.
             dlbRemoteNodeConnected 1.3.6.1.4.1.32761.3.5.1.0.3
This notification is sent when remote node associates.
             dlbRemoteNodeDisconnected 1.3.6.1.4.1.32761.3.5.1.0.4
This notification is sent when remote node dissasociates.
             dlbLinkQualThresholdReached 1.3.6.1.4.1.32761.3.5.1.0.5
This notification is sent when link quality crosses the specified threshold.
         dlbDot11Info 1.3.6.1.4.1.32761.3.5.1.1
         dlbDot11Conf 1.3.6.1.4.1.32761.3.5.1.2
             dlbDot11IfConfTable 1.3.6.1.4.1.32761.3.5.1.2.1 no-access
Wireless interface configuration table.
                 dlbDot11IfConfEntry 1.3.6.1.4.1.32761.3.5.1.2.1.1 no-access
Wireless interface configuration table entry.
                     dlbDot11IfParentIndex 1.3.6.1.4.1.32761.3.5.1.2.1.1.1 interfaceindex read-only
Wireless interface's parent index, which corresponds to ifIndex in MIB-II interfaces table. This is only applicable if the interface is virtual and it is created under some other interface, like it is for Atheros cards when using MadWiFi driver, where parent interfaces are wifi0, wifi1, etc.
                     dlbDot11IfProtocol 1.3.6.1.4.1.32761.3.5.1.2.1.1.2 octet string read-only
Protocol string, for example 'IEEE 802.11g'.
                     dlbDot11IfMode 1.3.6.1.4.1.32761.3.5.1.2.1.1.3 integer read-only
Wireless interface operation mode Enumeration: 'repeater': 4, 'monitor': 6, 'auto': 0, 'adhoc': 1, 'master': 3, 'managed': 2, 'secondary': 5.
                     dlbDot11IfESSID 1.3.6.1.4.1.32761.3.5.1.2.1.1.4 octet string read-only
ESSID
                     dlbDot11IfAccessPoint 1.3.6.1.4.1.32761.3.5.1.2.1.1.5 macaddress read-only
Access point's MAC address if working in managed mode and connected. Current interface's MAC address, when working in master mode.
                     dlbDot11IfCountryCode 1.3.6.1.4.1.32761.3.5.1.2.1.1.6 integer32 read-only
Country code.
                     dlbDot11IfFrequency 1.3.6.1.4.1.32761.3.5.1.2.1.1.7 integer32 read-only
Current frequency as reported by driver.
                     dlbDot11IfChannel 1.3.6.1.4.1.32761.3.5.1.2.1.1.8 integer32 read-only
Channel number.
                     dlbDot11IfChannelBandwidth 1.3.6.1.4.1.32761.3.5.1.2.1.1.9 integer32 read-only
Channel bandwidth.
                     dlbDot11IfTxPower 1.3.6.1.4.1.32761.3.5.1.2.1.1.10 gauge32 read-only
Transmit power in dBm.
                     dlbDot11IfBitRate 1.3.6.1.4.1.32761.3.5.1.2.1.1.11 gauge32 read-only
Transmission bitrate.
                     dlbDot11IfLinkQuality 1.3.6.1.4.1.32761.3.5.1.2.1.1.12 gauge32 read-only
Link quality value.
                     dlbDot11IfMaxLinkQuality 1.3.6.1.4.1.32761.3.5.1.2.1.1.13 gauge32 read-only
Maximum possible link quality value for current wireless card.
                     dlbDot11IfSignalLevel 1.3.6.1.4.1.32761.3.5.1.2.1.1.14 integer32 read-only
Signal level.
                     dlbDot11IfNoiseLevel 1.3.6.1.4.1.32761.3.5.1.2.1.1.15 integer32 read-only
Noise level.
                     dlbDot11IfAssocNodeCount 1.3.6.1.4.1.32761.3.5.1.2.1.1.16 gauge32 read-only
Number of associated nodes when working in access point mode. 1 - if associated to remote access point in client mode.
         dlbDot11Stats 1.3.6.1.4.1.32761.3.5.1.3
             dlbDot11IfErrStatsTable 1.3.6.1.4.1.32761.3.5.1.3.1 no-access
Wireless interface statistics table.
                 dlbDot11IfErrStatsEntry 1.3.6.1.4.1.32761.3.5.1.3.1.1 no-access
Wireless interface statistics table entry.
                     dlbDot11IfRxInvalidNWID 1.3.6.1.4.1.32761.3.5.1.3.1.1.1 counter32 read-only
Number of received packets with invalid NWID/ESSID. Increasing value usually means that there are other stations transmitting on the same channel or adjacent channels.
                     dlbDot11IfRxInvalidCrypt 1.3.6.1.4.1.32761.3.5.1.3.1.1.2 counter32 read-only
Number of received packets the hardware was unable to decrypt.
                     dlbDot11IfRxInvalidFrag 1.3.6.1.4.1.32761.3.5.1.3.1.1.3 counter32 read-only
Number of received packets that were missing link layer fragments for complete re-assembly.
                     dlbDot11IfTxExcessiveRetries 1.3.6.1.4.1.32761.3.5.1.3.1.1.4 counter32 read-only
Number of packets hardware failed to deliver.
                     dlbDot11IfInvalidMisc 1.3.6.1.4.1.32761.3.5.1.3.1.1.5 counter32 read-only
Other packets lost in relation with specific wireless operations.
                     dlbDot11IfMissedBeacons 1.3.6.1.4.1.32761.3.5.1.3.1.1.6 counter32 read-only
Number of beacons that should have been sent by remote access point but were not received. Increasing number usually means that communicating peers moved out of range.
             dlbDot11RemoteNodeStatsTable 1.3.6.1.4.1.32761.3.5.1.3.2 no-access
Remote node statistics table. This table shows statistics for associated or already disconnected clients on wireless interfaces which are operating in access point mode. For interfaces operating in client mode and associated to remote access point information about access point is shown.
                 dlbDot11RemoteNodeStatsEntry 1.3.6.1.4.1.32761.3.5.1.3.2.1 no-access
Wireless remote node statistics table entry.
                     dlbDot11RmtNodeMacAddress 1.3.6.1.4.1.32761.3.5.1.3.2.1.1 macaddress read-only
Remote node MAC address.
                     dlbDot11RmtNodeAssociated 1.3.6.1.4.1.32761.3.5.1.3.2.1.2 truthvalue read-only
Remote node is currently associated.
                     dlbDot11RmtNodeTxBytes 1.3.6.1.4.1.32761.3.5.1.3.2.1.3 counter32 read-only
Bytes transmitted to remote node. This object is optional.
                     dlbDot11RmtNodeRxBytes 1.3.6.1.4.1.32761.3.5.1.3.2.1.4 counter32 read-only
Bytes received from remote node. This object is optional.
                     dlbDot11RmtNodeAssocTime 1.3.6.1.4.1.32761.3.5.1.3.2.1.5 integer32 read-only
UNIX timestamp of the association. This object is optional.
                     dlbDot11RmtNodeDisassocTime 1.3.6.1.4.1.32761.3.5.1.3.2.1.6 integer32 read-only
UNIX timestamp of the disassociation (if remote node recently dissasociated). This object is optional.