DKSF-50-8-1-A-X: View SNMP OID List / Download MIB

VENDOR: ZAO LIGHT COMMUNICATION


 Home MIB: DKSF-50-8-1-A-X
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, SNMPv2-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 lightcom 1.3.6.1.4.1.25728
             netPing 1.3.6.1.4.1.25728.50
Generic MIB for NetPing remote sensing and control
             npPwr 1.3.6.1.4.1.25728.5800
                       npPwrTable 1.3.6.1.4.1.25728.5800.3 no-access
Watchdog and outlet/relay control table
                           npPwrEntry 1.3.6.1.4.1.25728.5800.3.1 no-access
Watchdog and outlet/relay control table row
                               npPwrChannelN 1.3.6.1.4.1.25728.5800.3.1.1 integer read-only
The id of watchdog/power channel
                               npPwrStartReset 1.3.6.1.4.1.25728.5800.3.1.2 integer read-write
Write 1 to start reset On read: 0 - normal operation 1 - reset is active 2 - reboot pause is active
                               npPwrManualMode 1.3.6.1.4.1.25728.5800.3.1.3 integer read-write
Mode of power channel 0 - manual off 1 - manual on 2 - watchdog Enumeration: 'on': 1, 'off': 0, 'watchdog': 2.
                               npPwrResetsCounter 1.3.6.1.4.1.25728.5800.3.1.4 integer read-write
Counter of watchdog resets Write 0 to clear.
                               npPwrRepeatingResetsCounter 1.3.6.1.4.1.25728.5800.3.1.5 integer read-only
Counter of continous failed watchdog resets
                               npPwrMemo 1.3.6.1.4.1.25728.5800.3.1.6 displaystring read-only
Watchdog/power channel memo
             npCurLoop 1.3.6.1.4.1.25728.8300
                       npCurLoopTable 1.3.6.1.4.1.25728.8300.1 no-access
Current loop sensors Table
                           npCurLoopEntry 1.3.6.1.4.1.25728.8300.1.1 no-access
Current loop sensors Table Row
                               npCurLoopN 1.3.6.1.4.1.25728.8300.1.1.1 integer read-only
Index of current loop, 1 to max supported
                               npCurLoopStatus 1.3.6.1.4.1.25728.8300.1.1.2 integer read-only
Status of the loop 0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Powered Enumeration: 'short': 3, 'cut': 2, 'ok': 0, 'notPowered': 4, 'alert': 1.
                               npCurLoopI 1.3.6.1.4.1.25728.8300.1.1.3 integer read-only
Loop current, mA
                               npCurLoopV 1.3.6.1.4.1.25728.8300.1.1.4 integer read-only
Voltage drop on the loop, mV
                               npCurLoopR 1.3.6.1.4.1.25728.8300.1.1.5 integer read-only
Resistance of the loop, Ohm
                               npCurLoopPower 1.3.6.1.4.1.25728.8300.1.1.7 integer read-write
Control of loop power 0=Off, 1=On, 2=reset by off/on power Enumeration: 'on': 1, 'off': 0, 'cyclePower': 2.
             npRelHumidity 1.3.6.1.4.1.25728.8400
                       npRelHumSensor 1.3.6.1.4.1.25728.8400.2
                           npRelHumSensorValueH 1.3.6.1.4.1.25728.8400.2.2 integer read-only
Relative humidity value, %
                           npRelHumSensorStatus 1.3.6.1.4.1.25728.8400.2.3 integer read-only
Status of the Rel.Humidity Sensor One 0=Normal, 1=Error or Sensor isn't connected Enumeration: 'ok': 0, 'error': 1.
                           npRelHumSensorValueT 1.3.6.1.4.1.25728.8400.2.4 integer read-only
Sensor temperature, deg.C
             npThermo 1.3.6.1.4.1.25728.8800
                       npThermoTable 1.3.6.1.4.1.25728.8800.1 no-access
Thermo Sensors Table
                           npThermoEntry 1.3.6.1.4.1.25728.8800.1.1 no-access
Thermo Sensors Table Row
                               npThermoSensorN 1.3.6.1.4.1.25728.8800.1.1.1 integer read-only
The id of temperature sensor, 1 to 8
                               npThermoValue 1.3.6.1.4.1.25728.8800.1.1.2 integer read-only
Temperature, deg.C
                               npThermoStatus 1.3.6.1.4.1.25728.8800.1.1.3 integer read-only
Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat) Enumeration: 'high': 3, 'failed': 0, 'low': 1, 'norm': 2.
                               npThermoLow 1.3.6.1.4.1.25728.8800.1.1.4 integer read-only
Bottom margin of normal temperature range, deg.C
                               npThermoHigh 1.3.6.1.4.1.25728.8800.1.1.5 integer read-only
Top margin of normal temperature range, deg.C
                               npThermoMemo 1.3.6.1.4.1.25728.8800.1.1.6 displaystring read-only
T channel memo
             npIo 1.3.6.1.4.1.25728.8900
                       npIoTable 1.3.6.1.4.1.25728.8900.1 no-access
Digital Input/output Table
                           npIoEntry 1.3.6.1.4.1.25728.8900.1.1 no-access
Digital Input/output Table Row
                               npIoLineN 1.3.6.1.4.1.25728.8900.1.1.1 integer read-only
Number of IO line, from 1 to max supported
                               npIoLevelIn 1.3.6.1.4.1.25728.8900.1.1.2 integer read-only
Input level, 0 or 1
                               npIoLevelOut 1.3.6.1.4.1.25728.8900.1.1.3 integer read-write
Output level, 0 or 1
                               npIoMemo 1.3.6.1.4.1.25728.8900.1.1.6 displaystring read-only
IO line memo