CISCO-ES-STACK-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: CISCO-ES-STACK-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, SNMPv2-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cisco 1.3.6.1.4.1.9
     workgroup 1.3.6.1.4.1.9.5
         esStack 1.3.6.1.4.1.9.5.14
               ciscoEsMain 1.3.6.1.4.1.9.5.14.1
                   ciscoEsConfig 1.3.6.1.4.1.9.5.14.1.1
                       ciscoEsIpAddr 1.3.6.1.4.1.9.5.14.1.1.1 ipaddress read-write
The IP address of the current vlan.
                       ciscoEsNetMask 1.3.6.1.4.1.9.5.14.1.1.2 ipaddress read-write
The subnet mask of the current vlan.
                       ciscoEsDefaultGateway 1.3.6.1.4.1.9.5.14.1.1.3 ipaddress read-write
IP default gateway of the current vlan.
                       ciscoEsSysCurTime 1.3.6.1.4.1.9.5.14.1.1.4 displaystring read-write
Current time at the switch. To set the time use the format yyyy mm dd hh mm ss. All fields are required. Setting this object will reset the time in all the switches in the stack to the new value.
                       ciscoEsConfiguration 1.3.6.1.4.1.9.5.14.1.1.5 integer read-only
The stack configuration of the system. A system can exist in three possible configurations. 1. Stand alone mode where the system has only one switch and is not connected to any other switches. 2. Back to Back mode in which a pair of switches are connected back to back through Stack Port. 3. Matrix mode in which the stack has up to eight switches connected to a Matrix through the Stack Port. Enumeration: 'back-to-back': 2, 'prostack-matrix': 3, 'stand-alone': 1.
                       ciscoEsNumSwitches 1.3.6.1.4.1.9.5.14.1.1.6 integer read-only
Total number of switches in the stack.
                       ciscoEsStackStatus 1.3.6.1.4.1.9.5.14.1.1.7 integer read-only
Stack status indicates if the stack is going through the Stack Management Update protocol. Management stations should check this status if they receive a generr on a SET request for any of the stack wide attributes. Enumeration: 'running': 1, 'updating': 2.
                       ciscoEsTftpServer 1.3.6.1.4.1.9.5.14.1.1.8 ipaddress read-write
TFTP sever's IP address.
                       ciscoEsTftpServerDomain 1.3.6.1.4.1.9.5.14.1.1.9 integer read-write
VLAN to which the server is connected.
                       ciscoEsTftpFileLoc 1.3.6.1.4.1.9.5.14.1.1.10 displaystring read-write
Location of the binary file on the server.
                       ciscoEsSetLock 1.3.6.1.4.1.9.5.14.1.1.11 ipaddress read-write
This object has not been in use since 2.0 release and there are currently no plans to implement it as defined below. This object when set to the manager's IP address locks out every other manager from doing any SET operations. This lock out expires after a fixed interval of 5 minutes. The Manager holding the lock can renew the lock by doing SET on this object again before the timeout expires otherwise it will contend with other managers trying to lock. The IP Address value should match the IP address that the manager uses to generate the SET request.
                       ciscoEsProStackMatrixStatus 1.3.6.1.4.1.9.5.14.1.1.12 integer read-only
Active Matrix module in the stack. This object is set to none if the switch is not connected to a Matrix. Enumeration: 'failed': 4, 'none': 3, 'primary': 1, 'secondary': 2.
                       ciscoEsNumMatrixModules 1.3.6.1.4.1.9.5.14.1.1.13 integer read-only
Number of Matrix modules in the stack. This object is set to zero if the switch is not connected to a Matrix.
                       ciscoEsLLPortDsbld 1.3.6.1.4.1.9.5.14.1.1.14 integer read-only
This OID is sent out along with the LINK_DOWN Trap only when the port is disabled due to the port security feature (learn and lock). Port could be disabled due to the discovery of invalid MAC address. Enumeration: 'disabled': 1.
                       ciscoEsTrapRcvrTable 1.3.6.1.4.1.9.5.14.1.1.25 no-access
Trap Receiver Table for each vlan.
                             ciscoEsTrapRcvrEntry 1.3.6.1.4.1.9.5.14.1.1.25.1 no-access
Definition of each row in the vlan specific trap receiver table.
                                 ciscoEsTrapRcvrIndex 1.3.6.1.4.1.9.5.14.1.1.25.1.1 integer read-only
Trap receiver index for each entry.
                                 ciscoEsTrapRcvrStatus 1.3.6.1.4.1.9.5.14.1.1.25.1.2 integer read-write
Setting the value of this object to invalid(3) deletes the row from the table. The value invalid(3) should never be returned on a GET. Setting this value to create(4) causes a new row to be created if the row does not already exist. To create a new row set ciscoEsTrapRcvrStatus to create(4) and ciscoEsTrapRcvrIndex to any valid index which does not already exist. The value returned on GETs should be valid(2) or other(1), which is used to indicate any other condition. Enumeration: 'create': 4, 'other': 1, 'valid': 2, 'invalid': 3.
                                 ciscoEsTrapRcvrIpAddress 1.3.6.1.4.1.9.5.14.1.1.25.1.3 ipaddress read-write
IP address for an SNMP manager that is to receive the trap.
                                 ciscoEsTrapRcvrComm 1.3.6.1.4.1.9.5.14.1.1.25.1.4 displaystring read-write
Community string to use.
                                 ciscoEsTrapRcvrVLANs 1.3.6.1.4.1.9.5.14.1.1.25.1.5 octet string read-write
VLANs to which traps to this target are sent out on. Each octet within the value of this object specifies a set of eight vlans, with the first octet specifying vlans 0 through 7, the second octet specifying vlans 8 through 15, etc. Within each octet, the most significant bit represents the lowest numbered vlan, and the least significant bit represents the highest numbered vlan. Thus, each vlan of the stack is represented by a single bit within the value of this object. If that bit has a value of '1' then that vlan is included in the set of ports; the vlan is not included if its bit has a value of '0'.
                         ciscoEsStackCfgChange 1.3.6.1.4.1.9.5.14.1.10.1
This trap is generated when there is a change in the stack configuration i.e. when either a new switch is added to the stack or a switch leaves a stack. ciscoEsNumSwitches indicates the current number of switches which are part of the stack. The management station has to update its stack information according to the stack table.
                         ciscoEsStackProStackMatrixChange 1.3.6.1.4.1.9.5.14.1.10.2
This trap is generated when the stack switches over from primary to secondary Matrix or from secondary back to primary Matrix.
               ciscoEsStack 1.3.6.1.4.1.9.5.14.2
                   ciscoEsStackTable 1.3.6.1.4.1.9.5.14.2.1 no-access
Stack information table. This table provides the current configuration of the stack. It also provides a mapping of Switch Numbers to their addresses. The Management Application is required to retrieve this table and verify its own view of the stack periodically and/or when it receives a trap indicating a change in the stack configuration.
                       ciscoEsStackEntry 1.3.6.1.4.1.9.5.14.2.1.1 no-access
Definition of each row in the Stack Table
                           ciscoEsStackSwitchNumber 1.3.6.1.4.1.9.5.14.2.1.1.1 integer read-only
Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back.
                           ciscoEsStackSwitchAddr 1.3.6.1.4.1.9.5.14.2.1.1.2 macaddr read-only
Mac address of the switch.
                           ciscoEsStackSwitchFwVersion 1.3.6.1.4.1.9.5.14.2.1.1.3 displaystring read-only
Version number for the firmware running on the switch.
                           ciscoEsStackSwitchHwVersion 1.3.6.1.4.1.9.5.14.2.1.1.4 displaystring read-only
Hardware version number for the switch.
                           ciscoEsStackSwitchUptime 1.3.6.1.4.1.9.5.14.2.1.1.6 timeticks read-only
Time ticks since the switch was last reset.
                           ciscoEsStackSwitchStatus 1.3.6.1.4.1.9.5.14.2.1.1.7 integer read-write
Operational status of the box. Setting this value to either coldReset (2) or warmReset (3) will cause cold start or warm start to occur after a specific time delay. Enumeration: 'warmReset': 3, 'running': 1, 'coldReset': 2.
                           ciscoEsStackSwitchTemperature 1.3.6.1.4.1.9.5.14.2.1.1.8 integer read-only
Temperature status of each switch. Enumeration: 'toohigh': 2, 'unknown': 3, 'normal': 1.
                           ciscoEsStackSwitchMemory 1.3.6.1.4.1.9.5.14.2.1.1.9 integer read-only
Installed memory on the switch in MB.
                           ciscoEsStackSwitchProbe 1.3.6.1.4.1.9.5.14.2.1.1.10 integer read-write
Port number to be monitored through the SwitchProbe. Setting this object to zero turns off SwitchProbe.
                           ciscoEsStackSwitchProbeDirection 1.3.6.1.4.1.9.5.14.2.1.1.11 integer read-write
Direction of traffic to monitor on the SwitchProbe. Enumeration: 'transmit': 1, 'receive': 2, 'none': 4, 'both': 3.
                           ciscoEsStackSwitchFeatureStatus 1.3.6.1.4.1.9.5.14.2.1.1.12 integer read-only
This object indicates whether the switch is enabled to support enhanced features. Enumeration: 'unknown': 3, 'enhanced': 2, 'standard': 1.
                           ciscoEsStackSwitchFeatureKey 1.3.6.1.4.1.9.5.14.2.1.1.13 integer read-write
Feature key to enable enhanced features.
                           ciscoEsStackSwitchPorts 1.3.6.1.4.1.9.5.14.2.1.1.14 octet string read-only
A bit mask representing all the ports present in this switch. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
                           ciscoEsStackSwitchAgingTime 1.3.6.1.4.1.9.5.14.2.1.1.15 integer read-write
Aging time in minutes for the master address table entries on this switch.
                           ciscoEsStackSwitchAgingLevel 1.3.6.1.4.1.9.5.14.2.1.1.16 integer read-write
Threshold to demand age the master address table. All numbers refer to percentage of the address table. The only values accepted by the agent are 50,60,70,80,90 and 0. Setting the value to 0 disables demand aging.
                           ciscoEsStackSwitchBufferOverruns 1.3.6.1.4.1.9.5.14.2.1.1.17 counter read-only
Number of times the switch was out of buffers.
                           ciscoEsStackSwitchSoftwareFrames 1.3.6.1.4.1.9.5.14.2.1.1.18 counter read-only
Total number of frames sent to the CPU on this switch.
                           ciscoEsStackSwitchInErrFrames 1.3.6.1.4.1.9.5.14.2.1.1.19 counter read-only
Total number of frames in error on this switch.
                           ciscoEsStackSwitchInShortFrames 1.3.6.1.4.1.9.5.14.2.1.1.20 counter read-only
Total number of frames which were too short received on this switch.
                           ciscoEsStackSwitchInLongFrames 1.3.6.1.4.1.9.5.14.2.1.1.21 counter read-only
Total number of frames which were too long received on this switch.
                           ciscoEsStackSwitchOutDroppedFrames 1.3.6.1.4.1.9.5.14.2.1.1.22 counter read-only
Total number of received frames dropped by switch.
                           ciscoEsStackSwitchInNoSpaceFrames 1.3.6.1.4.1.9.5.14.2.1.1.23 counter read-only
Number of times incoming frames had to be dropped because of no more memory available.
                           ciscoEsStackSwitchOutTotalReqs 1.3.6.1.4.1.9.5.14.2.1.1.24 counter read-only
Total number of requests made by the CPU to send out a frame.
                           ciscoEsStackSwitchOutTotalFrames 1.3.6.1.4.1.9.5.14.2.1.1.25 counter read-only
Total number of frames sent out from this switch requested by the CPU.
                           ciscoEsStackSwitchLongestHashChain 1.3.6.1.4.1.9.5.14.2.1.1.26 gauge read-only
The length of the longest hash chain in the CPU hash table.
                           ciscoEsStackSwitchHashTableFulls 1.3.6.1.4.1.9.5.14.2.1.1.27 counter read-only
Total number of times the hash table was full when trying to add an entry.
                           ciscoEsStackSwitchId 1.3.6.1.4.1.9.5.14.2.1.1.28 object identifier read-only
The switch Id used to uniquely identify the kind of the cisco ethernet switch.
                           ciscoEsStackSwitchDplxCtrl 1.3.6.1.4.1.9.5.14.2.1.1.29 integer read-write
Control of setting the ports to full or half duplex. Enumeration: 'hardware': 1, 'software': 2.
               ciscoEsModule 1.3.6.1.4.1.9.5.14.3
                   ciscoEsModTable 1.3.6.1.4.1.9.5.14.3.1 no-access
Module configuration table. Each EtherSwitch the set of 10 MB Ports is considered as slot 1. Each additional card which plugs into the system is numbered based on where the card is plugged into.
                       ciscoEsModEntry 1.3.6.1.4.1.9.5.14.3.1.1 no-access
Definition of each row in the Module Table
                           ciscoEsModSwitchNumber 1.3.6.1.4.1.9.5.14.3.1.1.1 integer read-only
Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back.
                           ciscoEsModNumber 1.3.6.1.4.1.9.5.14.3.1.1.2 integer read-only
The module number.
                           ciscoEsModState 1.3.6.1.4.1.9.5.14.3.1.1.3 integer read-only
The state indicates the current operational state of the module. Enumeration: 'nomodule': 1, 'running': 2, 'faulty': 4, 'stopped': 3.
                           ciscoEsModType 1.3.6.1.4.1.9.5.14.3.1.1.4 integer read-only
The type of module plugged in to the slot. Module type system (1) represents the mother board with the CPU and system memory. In RSM the system module always occupies slot 2. Module state none (6) represents a slot with no modules plugged in (indicated by ciscoEsModState). Enumeration: 'none': 10, 'unknown': 9, 'system': 1, 'ws-X3007-8': 11, 'ws-X3011': 14, 'ws-X3009': 12, 'ws-X3004': 2, 'ws-X3005': 4, 'ws-X3006': 8, 'ws-X3010': 13, 'ws-X3013': 6, 'ws-X3001': 3, 'ws-X3002': 5, 'ws-X3003': 7.
                           ciscoEsModRevision 1.3.6.1.4.1.9.5.14.3.1.1.5 integer read-only
The module revision number.
                           ciscoEsModNumPorts 1.3.6.1.4.1.9.5.14.3.1.1.6 integer read-only
Total number of ports in the module.
                           ciscoEsModUptime 1.3.6.1.4.1.9.5.14.3.1.1.7 timeticks read-only
Time in 1/100 seconds since the module was last reset.
               ciscoEsPort 1.3.6.1.4.1.9.5.14.4
                   ciscoEsPortTable 1.3.6.1.4.1.9.5.14.4.1 no-access
A table of information about each port. For Cisco ports only the following Counters are valid: ciscoEsPortInFrames ciscoEsPortOutFrames ciscoEsPortInOctets ciscoEsPortOutOctets ciscoEsPortLongFrames ciscoEsPortShortFrames ciscoEsPortSWHandledFrames ciscoEsPortInBufOverflows ciscoEsPortOutBufOverflows ciscoEsPortPktsInErrors ciscoEsPortForwardedFrames All other Counters will return 0 for such ports.
                       ciscoEsPortEntry 1.3.6.1.4.1.9.5.14.4.1.1 no-access
Definition of rows in the port table.
                           ciscoEsPortSwitchNumber 1.3.6.1.4.1.9.5.14.4.1.1.1 integer read-only
Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back.
                           ciscoEsPortNumber 1.3.6.1.4.1.9.5.14.4.1.1.2 integer read-only
A unique value for each port entry. The value corresponds the port number.
                           ciscoEsPortModNumber 1.3.6.1.4.1.9.5.14.4.1.1.3 integer read-only
Module number of the module that contains this port.
                           ciscoEsPortIfIndex 1.3.6.1.4.1.9.5.14.4.1.1.4 integer read-only
A pointer to the entry in the ifTable corresponding to this port.
                           ciscoEsPortDuplex 1.3.6.1.4.1.9.5.14.4.1.1.5 integer read-write
Indicates whether the port is jumper configured for full or half duplex operation. Note: internal connected ports are always halfDuplex(2). Enumeration: 'fullDuplex': 1, 'halfDuplex': 2.
                           ciscoEsPortRcvLocalFrames 1.3.6.1.4.1.9.5.14.4.1.1.6 counter read-only
Number of frames received where the destination is on this port.
                           ciscoEsPortForwardedFrames 1.3.6.1.4.1.9.5.14.4.1.1.7 counter read-only
Number of frames received on this port and forwarded to another port or the system module for processing.
                           ciscoEsPortMostStations 1.3.6.1.4.1.9.5.14.4.1.1.8 counter read-only
Highest number of stations ever active at any time since the last reset of the switch as seen by this port.
                           ciscoEsPortMaxStations 1.3.6.1.4.1.9.5.14.4.1.1.9 counter read-only
Maximum number of stations which the port can support simultaneously.
                           ciscoEsPortSWHandledFrames 1.3.6.1.4.1.9.5.14.4.1.1.10 counter read-only
Number of Frames received on this port and delivered to the system module for processing.
                           ciscoEsPortLocalStations 1.3.6.1.4.1.9.5.14.4.1.1.11 counter read-only
Number of stations on this port which belong to the local segment.
                           ciscoEsPortRemoteStations 1.3.6.1.4.1.9.5.14.4.1.1.12 counter read-only
Number of stations on this port which belong to another segment.
                           ciscoEsPortUnknownStaFrames 1.3.6.1.4.1.9.5.14.4.1.1.13 counter read-only
Number of unicast frames received on this port and forwarded to the system module for processing because the source or destination station address is not in the port's forwarding table.
                           ciscoEsPortResetStats 1.3.6.1.4.1.9.5.14.4.1.1.14 integer read-write
Setting this object to reset(3) causes all traffic counters for this port to be set to zero. Also the value of ciscoEsPortResetTimer is set to zero. Enumeration: 'reset': 3, 'running': 2, 'other': 1.
                           ciscoEsPortResetTimer 1.3.6.1.4.1.9.5.14.4.1.1.15 timeticks read-only
Time (in 100th second ticks) since the port counters were reset.
                           ciscoEsPortResetAddrs 1.3.6.1.4.1.9.5.14.4.1.1.16 integer read-write
Setting this object to reset(3) clears all address table entries for this port as well as setting all port traffic counters to zero and setting ciscoEsPortResetTimer to zero. Enumeration: 'reset': 3, 'running': 2, 'other': 1.
                           ciscoEsPortInFrames 1.3.6.1.4.1.9.5.14.4.1.1.17 counter read-only
Total Number of Frames received on this port.
                           ciscoEsPortOutFrames 1.3.6.1.4.1.9.5.14.4.1.1.18 counter read-only
Total Number of Frames transmitted by this port.
                           ciscoEsPortLongFrames 1.3.6.1.4.1.9.5.14.4.1.1.19 counter read-only
Total Number of Frames received on this port which were too long.
                           ciscoEsPortShortFrames 1.3.6.1.4.1.9.5.14.4.1.1.20 counter read-only
Total Number of Frames received on this port which were too short.
                           ciscoEsPortInBufOverflows 1.3.6.1.4.1.9.5.14.4.1.1.21 counter read-only
Total Number of Frames received on this port which caused a receive buffer overflow.
                           ciscoEsPortOutBufOverflows 1.3.6.1.4.1.9.5.14.4.1.1.22 counter read-only
Total Number of Frames which could not be transmitted from this port because of transmit buffer overflow.
                           ciscoEsPortRcvBcasts 1.3.6.1.4.1.9.5.14.4.1.1.23 counter read-only
Number of Broadcast Frames received on this port without errors.
                           ciscoEsPortRcvMcasts 1.3.6.1.4.1.9.5.14.4.1.1.24 counter read-only
Number of Multicast Frames received on this port without errors.
                           ciscoEsPortSwitchedFrames 1.3.6.1.4.1.9.5.14.4.1.1.25 counter read-only
Number of frames switched on this port.
                           ciscoEsPortInOctets 1.3.6.1.4.1.9.5.14.4.1.1.26 counter read-only
Total number of octets received through this port. This counter is the same as the ifInOctets counter in ifTable corresponding to this port.
                           ciscoEsPortOutOctets 1.3.6.1.4.1.9.5.14.4.1.1.27 counter read-only
Total number of octets transmitted from this port. This counter is the same as the ifOutOctets counter in ifTable corresponding to this port.
                           ciscoEsPortPktsInErrors 1.3.6.1.4.1.9.5.14.4.1.1.28 counter read-only
Total number of packets received or transmitted from this port and there was an error.
                           ciscoEsPortLinkState 1.3.6.1.4.1.9.5.14.4.1.1.29 integer read-only
Link state of the port. Enumeration: 'down': 2, 'up': 1.
                           ciscoEsPortOprStatus 1.3.6.1.4.1.9.5.14.4.1.1.30 integer read-write
Operational status of the port. Failed is returned when the the port fails power-on diagnostic tests. Enumeration: 'disabled': 2, 'failed': 3, 'enabled': 1.
                           ciscoEsPortMdiMdix 1.3.6.1.4.1.9.5.14.4.1.1.31 integer read-only
Indicates whether the port is configured as MDI or MDIX or none (meaning not applicable). This object is also used to show the termination status for 10Base2 type ports. Enumeration: 'internal-term-on': 4, 'none': 3, 'mdi': 1, 'mdix': 2, 'internal-term-off': 5.
                           ciscoEsPortHashOverflows 1.3.6.1.4.1.9.5.14.4.1.1.32 counter read-only
Number of times a hash bucket was full when trying to add an entry to the port address table.
                           ciscoEsPortTableOverflows 1.3.6.1.4.1.9.5.14.4.1.1.33 counter read-only
Number of times the address table was full when trying to add an entry to the port address table.
                           ciscoEsPortAddrAgingTime 1.3.6.1.4.1.9.5.14.4.1.1.34 integer read-write
Port level address aging time in minutes. Setting this object to zero disables address aging.
                           ciscoEsPortDemandAgingLevel 1.3.6.1.4.1.9.5.14.4.1.1.35 integer read-write
Threshold to demand age the port address table. All numbers refer to percentage of the address table. The only values accepted by the agent are 50,60,70,80,90 and 0. Setting the value to 0 disables demand aging.
                           ciscoEsPortCfgMode 1.3.6.1.4.1.9.5.14.4.1.1.36 integer read-write
Set bridging mode for the port. Enumeration: 'ieee8021d': 1, 'cutthr': 2, 'auto': 3.
                           ciscoEsPortActiveMode 1.3.6.1.4.1.9.5.14.4.1.1.37 integer read-only
Operational bridging mode for the port. Enumeration: 'ieee8021d': 1, 'cutthr': 2, 'unknown': 3.
                           ciscoEsPortErrThreshold 1.3.6.1.4.1.9.5.14.4.1.1.38 integer read-write
Threshold error rate when the port moves from cut-through to store and forward mode.
                           ciscoEsPortLearningState 1.3.6.1.4.1.9.5.14.4.1.1.39 integer read-write
Configure learning state on this port. Enumeration: 'disableDstnLearning': 3, 'disableLearning': 4, 'disableSrcLearning': 2, 'normal': 1.
                           ciscoEsPortRuntlessMode 1.3.6.1.4.1.9.5.14.4.1.1.40 integer read-write
Turn on/off runtless filtering on this port. When this this mode is turned on, no runts will be forwarded. Enumeration: 'on': 1, 'off': 2.
                           ciscoEsPortType 1.3.6.1.4.1.9.5.14.4.1.1.41 integer read-only
Type of port. Enumeration: 'type-ISL-FX': 12, 'type-10BaseT-4': 5, 'type-100VG-Fx': 10, 'type-ATM155': 8, 'unknown': 9, 'type-StkPort': 2, 'type-100VG-Tx': 11, 'type-10BaseFL': 7, 'type-ISL-TX': 13, 'type-R2503': 14, 'type-100BaseFx': 4, 'type-10BaseT': 1, 'type-10Base2': 6, 'type-100BaseT': 3.
                           ciscoEsPortCDPTimeToLive 1.3.6.1.4.1.9.5.14.4.1.1.42 integer read-write
The advertised time-to-live parameter on all CDP messages generated by this switch on this vlan.
                           ciscoEsPortFastPort 1.3.6.1.4.1.9.5.14.4.1.1.43 integer read-write
Indicates whether the port is enable or disable for fast port support. When fast port is enable, port state will go to forwarding as soon as the link is up. Enumeration: 'enable': 2, 'disable': 1.
                           ciscoEsPortISLOperStatus 1.3.6.1.4.1.9.5.14.4.1.1.44 integer read-only
The current operational mode for an ISL port. Enumeration: 'non-trunking': 2, 'trunking': 1.
                           ciscoEsPortISLAdminStatus 1.3.6.1.4.1.9.5.14.4.1.1.45 integer read-write
Used to configure the DISL modes for an ISL trunk port. Enumeration: 'on': 1, 'off': 2, 'desirable': 3, 'auto': 4.
                   ciscoEsOptPortStaTable 1.3.6.1.4.1.9.5.14.4.2 no-access
A table of station addresses known at an individual port. This table is designed to reduce the number of SNMP GETNEXT requests. This is done by packing many values into an octet string. (The maximum size frame should be used to return the result.) The instance returned for a GETNEXT is the value that identifies the last 'row' in the octet string. When the table is completely retrieved with one or more GETNEXTs, duplicate entries may be present, and entries may be skipped if the table is changing while being retrieved.
                       ciscoEsOptPortStaEntry 1.3.6.1.4.1.9.5.14.4.2.1 no-access
Definition of the rows in the optimized port station address table. Rows can not be created or deleted via SNMP requests.
                           ciscoEsOptPortStaPos 1.3.6.1.4.1.9.5.14.4.2.1.1 integer read-only
Third index for items in the optimized port station address table.
                           ciscoEsOptPortStaVal 1.3.6.1.4.1.9.5.14.4.2.1.2 octet string read-only
An OCTET STRING containing a multiple number of stations from a port station address table. Each entry is encoded in the following format: Station MAC address - 6 octets Location 1 - local 2 - remote - 1 octet Port of exit Mask - 4 octets Source Frame Count - 4 octets (integer in little endian) Destn Frame Count - 4 octets (integer in little endian) Source Byte Count - 4 octets (integer in little endian) Destn Byte Count - 4 octets (integer in little endian) The Port of exit mask is encoded in its raw form as stored in the switch. Octet 1 Bit position 7 6 5 4 3 2 1 0 Port Number 31 30 29 28 27 26 25 24 Octet 2 Bit position 7 6 5 4 3 2 1 0 Port Number 23 22 21 20 19 18 17 16 Octet 3 Bit position 7 6 5 4 3 2 1 0 Port Number 15 14 13 12 11 10 9 8 Octet 4 Bit position 7 6 5 4 3 2 1 0 Port Number 7 6 5 4 3 2 1 CPU
                   ciscoEsPortStnTable 1.3.6.1.4.1.9.5.14.4.3 no-access
Port station table.
                       ciscoEsPortStnEntry 1.3.6.1.4.1.9.5.14.4.3.1 no-access
Definition of the Conceptual row in the Port station table.
                           ciscoEsPortStnSwitchNumber 1.3.6.1.4.1.9.5.14.4.3.1.1 integer read-only
Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back.
                           ciscoEsPortStnPortNum 1.3.6.1.4.1.9.5.14.4.3.1.2 integer read-only
Port number corresponding to this entry.
                           ciscoEsPortStnAddress 1.3.6.1.4.1.9.5.14.4.3.1.3 macaddr read-only
Station MAC address.
                           ciscoEsPortStnLocation 1.3.6.1.4.1.9.5.14.4.3.1.4 integer read-only
Where the station is located. Enumeration: 'remote': 2, 'local': 1.
                           ciscoEsPortStnSrcFrames 1.3.6.1.4.1.9.5.14.4.3.1.5 counter read-only
Number of frames with this station as the source.
                           ciscoEsPortStnSrcBytes 1.3.6.1.4.1.9.5.14.4.3.1.6 counter read-only
Number of Bytes with this station as the source.
                           ciscoEsPortStnDestnFrames 1.3.6.1.4.1.9.5.14.4.3.1.7 counter read-only
Number of frames with this station as the destination.
                           ciscoEsPortStnDestnBytes 1.3.6.1.4.1.9.5.14.4.3.1.8 counter read-only
Number of bytes with this station as the destination.
                           ciscoEsPortStnPortOfExit 1.3.6.1.4.1.9.5.14.4.3.1.9 octet string read-only
A bit string that identifies the ports that frames destined to this address are forwarded to when received on this port. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
               ciscoEsDmns 1.3.6.1.4.1.9.5.14.5
               ciscoEsEChannel 1.3.6.1.4.1.9.5.14.6
                   ciscoEsECTable 1.3.6.1.4.1.9.5.14.6.1 no-access
The EtherChannel table.
                       ciscoEsECEntry 1.3.6.1.4.1.9.5.14.6.1.1 no-access
Definition of each row in the EtherChannel table.
                           ciscoEsECSwitchNumber 1.3.6.1.4.1.9.5.14.6.1.1.1 integer read-only
Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back.
                           ciscoEsECNumber 1.3.6.1.4.1.9.5.14.6.1.1.2 integer read-only
The EtherChannel number for this row.
                           ciscoEsECPorts 1.3.6.1.4.1.9.5.14.6.1.1.3 octet string read-write
The set of ports in this switch which are active in this EtherChannel. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
               ciscoEsFilter 1.3.6.1.4.1.9.5.14.7
                   ciscoEsFilterTable 1.3.6.1.4.1.9.5.14.7.1 no-access
Filters set up in the switch.
                       ciscoEsFilterEntry 1.3.6.1.4.1.9.5.14.7.1.1 no-access
Definition of each row in the filter table.
                           ciscoEsFilterSwitchNumber 1.3.6.1.4.1.9.5.14.7.1.1.1 integer read-only
Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back.
                           ciscoEsFilterStationAddress 1.3.6.1.4.1.9.5.14.7.1.1.2 macaddr read-only
The destination MAC address in a frame to which this entry's filtering information applies.
                           ciscoEsFilterType 1.3.6.1.4.1.9.5.14.7.1.1.3 integer read-only
There are two types of filters (i) source filters which act on the source address portion of a packet and (ii) destination filters which act on the destination address portion of a packet. Enumeration: 'destination-filter': 2, 'source-filter': 1.
                           ciscoEsFilterPorts 1.3.6.1.4.1.9.5.14.7.1.1.4 octet string read-write
The set of ports to which this filter is applied. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
                           ciscoEsFilterMask 1.3.6.1.4.1.9.5.14.7.1.1.5 octet string read-write
The filter mask for this station. The semantics of the filter mask depend on the type of filter. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
                           ciscoEsFilterRemoteSwitch 1.3.6.1.4.1.9.5.14.7.1.1.6 integer read-write
In case of destination filters you can specify a particular port in a remote box as the destination port for a given station address. A value of 0 indicates no remote switch is configured.
                           ciscoEsFilterRemotePort 1.3.6.1.4.1.9.5.14.7.1.1.7 integer read-write
In case of destination filters you can specify a particular port in a remote box as the destination port for a given station address. A value of 0 indicates no remote ports assigned.
                           ciscoEsFilterStatus 1.3.6.1.4.1.9.5.14.7.1.1.8 integer read-write
GET request always returns valid (1). Set this object to invalid (2) to delete an entry. Enumeration: 'valid': 1, 'invalid': 2.
               ciscoEsVLANs 1.3.6.1.4.1.9.5.14.8
                   ciscoEsVLANPortTable 1.3.6.1.4.1.9.5.14.8.1 no-access
VLAN configuration table.
                       ciscoEsVLANPortEntry 1.3.6.1.4.1.9.5.14.8.1.1 no-access
Definition of each row in the vlan Table
                           ciscoEsVLANPortVLANNumber 1.3.6.1.4.1.9.5.14.8.1.1.1 integer read-only
VLAN identifier for this row.
                           ciscoEsVLANPortSwitchNumber 1.3.6.1.4.1.9.5.14.8.1.1.2 integer read-only
Switch number determined by the port number that the switch is connected to in a Matrix or as determined by the Stack Management software when two switches are connected back to back.
                           ciscoEsVLANPortPorts 1.3.6.1.4.1.9.5.14.8.1.1.3 octet string read-write
The set of ports in this switch which belong to this VLAN. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
                   ciscoEsVLANInfoTable 1.3.6.1.4.1.9.5.14.8.2 no-access
VLAN Information table.
                       ciscoEsVLANInfoEntry 1.3.6.1.4.1.9.5.14.8.2.1 no-access
Definition of each row in the vlan Table
                           ciscoEsVLANInfoVLANNumber 1.3.6.1.4.1.9.5.14.8.2.1.1 integer read-only
VLAN identifier for this row.
                           ciscoEsVLANInfoState 1.3.6.1.4.1.9.5.14.8.2.1.2 integer read-only
Current state of the vlan. If a vlan has at least one port, it is considered active (1). Enumeration: 'active': 1, 'inactive': 2.
                           ciscoEsVLANInfoName 1.3.6.1.4.1.9.5.14.8.2.1.3 displaystring read-write
User defined name of the vlan.
                           ciscoEsVLANInfoBaseAddr 1.3.6.1.4.1.9.5.14.8.2.1.4 macaddr read-only
The MAC address assigned to this vlan. This address is the MAC address of the lowest numbered port in the vlan.
                           ciscoEsVLANInfoIfIndex 1.3.6.1.4.1.9.5.14.8.2.1.5 integer read-only
The ifIndex of the interface entry corresponding to each vlan.
                           ciscoEsVLANInfoIpState 1.3.6.1.4.1.9.5.14.8.2.1.6 integer read-write
IP configuration for this vlan. Enumeration: 'disabled': 1, 'auto-bootp': 2, 'always-bootp': 3.
                           ciscoEsVLANInfoIpAddress 1.3.6.1.4.1.9.5.14.8.2.1.7 ipaddress read-write
IP Address assigned to this vlan. Changes to the IP Address of the vlan to which the management station belongs cause loss of connectivity until the management station updates its information about the IP Address.
                           ciscoEsVLANInfoIpSubnetMask 1.3.6.1.4.1.9.5.14.8.2.1.8 ipaddress read-write
The subnet mask for this vlan.
                           ciscoEsVLANInfoIpDefaultGateway 1.3.6.1.4.1.9.5.14.8.2.1.9 ipaddress read-write
The IP Address of the default gateway for this VLAN.
                           ciscoEsVLANInfoStp 1.3.6.1.4.1.9.5.14.8.2.1.10 integer read-write
Turn Spanning tree on or off. Enumeration: 'on': 1, 'off': 2.
                           ciscoEsVLANInfoNumStations 1.3.6.1.4.1.9.5.14.8.2.1.11 gauge read-only
Number of local stations (nodes) in the vlan.
                           ciscoEsVLANInfoMaxStations 1.3.6.1.4.1.9.5.14.8.2.1.12 integer read-only
Aggregate of the highest number of local stations (nodes) in the vlan calculated separately on each box.
                   ciscoEsVLANStpTable 1.3.6.1.4.1.9.5.14.8.3 no-access
Spanning tree information table for each vlan.
                       ciscoEsVLANStpEntry 1.3.6.1.4.1.9.5.14.8.3.1 no-access
Definition of each row in the vlan specific spanning tree information table.
                           ciscoEsVLANStpVLANIndex 1.3.6.1.4.1.9.5.14.8.3.1.1 integer read-only
Integer reference to the vlan number in the vlan table.
                           ciscoEsVLANStpPriority 1.3.6.1.4.1.9.5.14.8.3.1.2 integer read-write
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of ciscoEsVLANBaseBridgeAddress. The bridge ID corresponds to the particular instance of spanning tree running in this vlan
                           ciscoEsVLANStpTimeSinceTopologyChange 1.3.6.1.4.1.9.5.14.8.3.1.3 timeticks read-only
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
                           ciscoEsVLANStpTopChanges 1.3.6.1.4.1.9.5.14.8.3.1.4 counter read-only
The total number of topology changes detected by this vlan since the management entity was last reset or initialized.
                           ciscoEsVLANStpDesignatedRoot 1.3.6.1.4.1.9.5.14.8.3.1.5 bridgeid read-only
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this vlan.
                           ciscoEsVLANStpRootCost 1.3.6.1.4.1.9.5.14.8.3.1.6 integer read-only
The cost of the path to the root as seen from this vlan.
                           ciscoEsVLANStpRootPort 1.3.6.1.4.1.9.5.14.8.3.1.7 integer read-only
The port number of the port which offers the lowest cost path from this vlan to the root bridge.
                           ciscoEsVLANStpMaxAge 1.3.6.1.4.1.9.5.14.8.3.1.8 integer read-only
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this vlan is currently using.
                           ciscoEsVLANStpHelloTime 1.3.6.1.4.1.9.5.14.8.3.1.9 integer read-only
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this vlan is currently using.
                           ciscoEsVLANStpHoldTime 1.3.6.1.4.1.9.5.14.8.3.1.10 integer read-only
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this vlan, in units of hundredths of a second.
                           ciscoEsVLANStpForwardDelay 1.3.6.1.4.1.9.5.14.8.3.1.11 integer read-only
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this vlan is currently using, in contrast to ciscoEsVLANStpBridgeForwardDelay which is the value that this vlan and all others would start using if/when this vlan were to become the root.]
                           ciscoEsVLANStpBridgeMaxAge 1.3.6.1.4.1.9.5.14.8.3.1.12 integer read-write
The value that all bridges use for MaxAge when this vlan is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of ciscoEsVLANStpBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
                           ciscoEsVLANStpBridgeHelloTime 1.3.6.1.4.1.9.5.14.8.3.1.13 integer read-write
The value that all bridges use for HelloTime when this vlan is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
                           ciscoEsVLANStpBridgeForwardDelay 1.3.6.1.4.1.9.5.14.8.3.1.14 integer read-write
The value that all bridges use for ForwardDelay when this vlan is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of ciscoEsVLANStpBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
                   ciscoEsVLANStationTable 1.3.6.1.4.1.9.5.14.8.4 no-access
Stations seen in each vlan.
                       ciscoEsVLANStationEntry 1.3.6.1.4.1.9.5.14.8.4.1 no-access
Definition of each row in the vlan specific station table.
                           ciscoEsVLANStationVLANIndex 1.3.6.1.4.1.9.5.14.8.4.1.1 integer read-only
Integer reference to the vlan number in the vlan table.
                           ciscoEsVLANStationBoxNum 1.3.6.1.4.1.9.5.14.8.4.1.2 integer read-only
Integer reference to the switch number on which the table entry resides.
                           ciscoEsVLANStationAddress 1.3.6.1.4.1.9.5.14.8.4.1.3 octet string read-only
The Station's MAC address.
                           ciscoEsVLANStationPort 1.3.6.1.4.1.9.5.14.8.4.1.4 integer read-only
The source port for the Station.
                           ciscoEsVLANStationTraffic 1.3.6.1.4.1.9.5.14.8.4.1.5 octet string read-only
A bit string that identifies with value of one of the ports that this station has generated traffic to or from. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the EtherSwitch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
                   ciscoEsOptVLANStaTable 1.3.6.1.4.1.9.5.14.8.5 no-access
A table of station addresses known at an individual port. This table is designed to reduce the number of SNMP GETNEXT requests. This is done by packing many values into an octet string. (The maximum size frame should be used to return the result.) The instance returned for a GETNEXT is the value that identifies the last 'row' in the octet string. When the table is completely retrieved with one or more GETNEXTs, duplicate entries may be present, and entries may be skipped if the table is changing while being retrieved.
                       ciscoEsOptVLANStaEntry 1.3.6.1.4.1.9.5.14.8.5.1 no-access
Definition of the rows in the optimized port station address table. Rows can not be created or deleted via SNMP requests.
                           ciscoEsOptVLANStaPos 1.3.6.1.4.1.9.5.14.8.5.1.1 integer read-only
Third index for items in the optimized port station address table.
                           ciscoEsOptVLANStaVal 1.3.6.1.4.1.9.5.14.8.5.1.2 octet string read-only
An OCTET STRING containing a multiple number of stations from the vlan station address table. Each entry is encoded in the following format: Station MAC address - 6 octets Port of Entry - 1 octet Traffic Mask - 4 octets The traffic mask is encoded in its raw form as stored in the switch. Octet 1 Bit position 7 6 5 4 3 2 1 0 Port Number 31 30 29 28 27 26 25 24 Octet 2 Bit position 7 6 5 4 3 2 1 0 Port Number 23 22 21 20 19 18 17 16 Octet 3 Bit position 7 6 5 4 3 2 1 0 Port Number 15 14 13 12 11 10 9 8 Octet 4 Bit position 7 6 5 4 3 2 1 0 Port Number 7 6 5 4 3 2 1 CPU
                   ciscoEsTransitedConfiguredVLANs 1.3.6.1.4.1.9.5.14.8.6 octet string read-write
A string of octets containing one bit per VLAN in the management domain. The first octet corresponds to VLANs with VlanIndex 1 through 8; the second octet to VLANs 9 through 16; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. If the bit correspond to a VLAN is set to '1', then the VLAN is a configured transited VLAN on the local device. (Default VLANs which must transit the local device are always considered to be 'configured transited VLANs'.) Any attempt to set a bit string which has: more bits set than the local device can transit; or does not have all bits set corresponding to default VLANs which must transit the device; or set any bits corresponding to non-existant VLANs (VLANs whose IDs are not defined in the management domain) will be completely rejected as an illegal value.
                   ciscoEsTransitedVLANs 1.3.6.1.4.1.9.5.14.8.7 octet string read-only
A string of octets containing one bit per VLAN in the management domain. The first octet corresponds to VLANs with VlanIndex 1 through 8; the second octet to VLANs 9 through 16; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. If the bit corresponding to a VLAN is set to '1', then the VLAN transits the local device either because it was configured to or because it was selected to automatically by the selection algorithm.
               ciscoEsRouter 1.3.6.1.4.1.9.5.14.9
                   ciscoEsRouterTable 1.3.6.1.4.1.9.5.14.9.1 no-access
Router Port information.
                       ciscoEsRouterEntry 1.3.6.1.4.1.9.5.14.9.1.1 no-access
Definition of each row in the Router Table
                           ciscoEsRouterBox 1.3.6.1.4.1.9.5.14.9.1.1.1 integer read-only
Index into the router table row.
                           ciscoEsRouterPort 1.3.6.1.4.1.9.5.14.9.1.1.2 integer read-only
Index into the router table column.
                           ciscoEsRouterOpState 1.3.6.1.4.1.9.5.14.9.1.1.3 integer read-only
GET request returns up (1) down(2) for operation state. Enumeration: 'down': 2, 'unknown': 4, 'up': 1, 'empty': 3.
                           ciscoEsRouterNetAddr 1.3.6.1.4.1.9.5.14.9.1.1.4 ipaddress read-only
The IP address of the router.
                           ciscoEsRouterBoardId 1.3.6.1.4.1.9.5.14.9.1.1.5 integer read-only
The Board Id of the router.
                           ciscoEsRouterRev 1.3.6.1.4.1.9.5.14.9.1.1.6 integer read-only
The Board Rev of the router.
                     ciscoEsStackTempChange 1.3.6.1.4.1.9.5.14.20.1
This trap is generated when the temperature in a switch exceeds normal or returns to normal.
                     ciscoEsPortStrNFwdEntry 1.3.6.1.4.1.9.5.14.40.1
This trap is generated when a port automatically enters store and forward mode when the error rate exceeds the threshold.
                     ciscoEsEtherChannelFailed 1.3.6.1.4.1.9.5.14.60.1
This trap is sent when one of the links in an EtherChannel fail. The variable ciscoEsECPorts contains the ports which are operational in the EtherChannel.
                     ciscoEsVLANNewRoot 1.3.6.1.4.1.9.5.14.80.1
This trap is a vlan specific version of the newRoot trap as described in RFC1493. The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer immediately subsequent to its election. Implementation of this trap is optional.
                     ciscoEsVLANTopologyChange 1.3.6.1.4.1.9.5.14.80.2
This trap is a vlan specific version of the topologyChange trap as described in RFC1493. A topologyChange trap is sent by a bridge when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap is not sent if a newRoot trap is sent for the same transition. Implementation of this trap is optional.