CIENA-CES-MPLS-MIB: View SNMP OID List / Download MIB

VENDOR: CIENA CORPORATION


 Home MIB: CIENA-CES-MPLS-MIB
Download as:   
SNMPv2-CONF, CIENA-SMI, SNMPv2-SMI, MPLS-TC-STD-MIB, CIENA-GLOBAL-MIB, CIENA-TC, IANA-ADDRESS-FAMILY-NUMBERS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cienaCesMplsMIB 1.3.6.1.4.1.1271.2.1.18
This MIB module defines the mgmt objects for the MPLS feature for LEOS based Ciena products.
       cienaCesMplsMIBObjects 1.3.6.1.4.1.1271.2.1.18.1
           cienaCesMpls 1.3.6.1.4.1.1271.2.1.18.1.1
               cienaCesMplsGlobalAttrs 1.3.6.1.4.1.1271.2.1.18.1.1.1
                   cienaCesMplsStaticAdminLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.1.1.1 integer read-only
The beginning of the static administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
                   cienaCesMplsStaticAdminLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.1.1.2 integer read-only
The end of the static administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
                   cienaCesMplsStaticOperLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.1.1.3 integer read-only
The beginning of the static operational label range. There cannot be any overlap between static and dynamic label ranges.
                   cienaCesMplsStaticOperLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.1.1.4 integer read-only
The end of the static operational label range. There cannot be any overlap between static and dynamic label ranges.
                   cienaCesMplsDynamicAdminLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.1.1.5 integer read-only
The beginning of the dynamic administrative label range. There cannot be any overlap between static and dynamic label ranges.
                   cienaCesMplsDynamicAdminLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.1.1.6 integer read-only
The end of the dynamic administrative label range. There cannot be any overlap between static and dynamic label ranges.
                   cienaCesMplsDynamicOperLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.1.1.7 integer read-only
The beginning of the dynamic operational label range. There cannot be any overlap between static and dynamic label ranges.
                   cienaCesMplsDynamicOperLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.1.1.8 integer read-only
The end of the dynamic operational label range. There cannot be any overlap between static and dynamic label ranges.
               cienaCesMplsStaticIngressTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.2 no-access
The (conceptual) table listing the MPLS static encap tunnels.
                   cienaCesMplsStaticIngressTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.2.1 no-access
This represents an entry of the MPLS static encap tunnel table.
                       cienaCesMplsStaticIngressTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.1 unsigned32 no-access
Unique index in the table.
                       cienaCesMplsStaticIngressTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.2 displaystring read-only
This represents the encap tunnel name. Tunnel names are common across static and dynamic.
                       cienaCesMplsStaticIngressTunnelWeight 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.3 integer read-only
A parameter to select the order of precedence of encap tunnels during tunnel switchover or reversion (if tunnel reversion is enabled). A higher weight indicates higher preference during switchover or reversion.
                       cienaCesMplsStaticIngressTunnelNextHopIp 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.4 ipaddress read-only
Specifies the next hop IP address for the static encap tunnel.
                       cienaCesMplsStaticIngressTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.5 cienaglobalstate read-only
Specifies the administrative status of the static encap tunnel.
                       cienaCesMplsStaticIngressTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.6 cienaglobalstate read-only
Specifies the operational status of the static encap tunnel.
                       cienaCesMplsStaticIngressTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.7 ipaddress read-only
Destination IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.
                       cienaCesMplsStaticIngressTunnelLabel 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.8 integer read-only
The label for the static encap tunnel.
                       cienaCesMplsStaticIngressTunnelFrmCosPolicy 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.9 fcospolicy read-only
Frame CoS policy of the static encap tunnel.
                       cienaCesMplsStaticIngressTunnelFrmCosMapId 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.10 integer read-only
The frame CoS map ID of the static encap tunnel. This value is valid if the frame CoS policy selected for the static encap tunnel is rcos-mapped. This value corresponds to the index cienaCesTceDpTsCosMapFcosMapId of the cienaCesTceDpTsCosMapFcosMapTable.
                       cienaCesMplsStaticIngressTunnelFixedExp 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.11 unsigned32 read-only
This object is deprecated and the new object to provide this information is cienaCesMplsStaticIngressTunnelFixedTC in this table.
                       cienaCesMplsStaticIngressTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.12 ttlpolicy read-only
Specifies whether TTL is fixed or inherited from the frame.
                       cienaCesMplsStaticIngressTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.13 unsigned32 read-only
If the TTL policy for the static encap tunnel is fixed, then this object is the TTL value.
                       cienaCesMplsStaticIngressTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.14 unsigned32 read-only
The group ID of the tunnel group of which the static encap tunnel is a member.
                       cienaCesMplsStaticIngressTunnelReversion 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.16 integer read-only
Indicates whether tunnel reversion is turned on/off for this encap tunnel. Enumeration: 'on': 1, 'off': 2.
                       cienaCesMplsStaticIngressTunnelReversionTimeout 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.17 integer read-only
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
                       cienaCesMplsStaticIngressTunnelPrimaryTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.18 displaystring read-only
This object represents the primary tunnel it is protecting, if this is a backup tunnel.
                       cienaCesMplsStaticIngressTunnelFixedTC 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.19 unsigned32 read-only
If the frame CoS policy for the static encap tunnel is fixed, this value is used for MPLS encapsulation.
                       cienaCesMplsStaticIngressTunnelProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.20 integer read-only
specifies the protection role of the static encap tunnel Enumeration: 'none': 0, 'backup': 2, 'primary': 1.
                       cienaCesMplsStaticIngressTunnelProtectionState 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.21 integer read-only
specifies the protection status of the static encap tunnel Enumeration: 'standby': 0, 'active': 1.
                       cienaCesMplsStaticIngressTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.22 displaystring read-only
This object represents the primary tunnel it is protecting, if this is a backup tunnel.
                       cienaCesMplsStaticIngressTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.23 integer read-only
This object represents Cos profile index
                       cienaCesMplsStaticIngressTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.24 displaystring read-only
Specifies the name of Cos profile
                       cienaCesMplsStaticIngressTunnelRecoveryDisjoint 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.25 integer read-only
Specifies the type of Recovery Disjoint Enumeration: 'node': 3, 'srlg': 4, 'none': 1, 'link': 2, 'unknown': 5.
               cienaCesMplsDynamicIngressTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.3 no-access
The (conceptual) table listing the MPLS encap tunnels.
                   cienaCesMplsDynamicIngressTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.3.1 no-access
An entry in the dynamic encap tunnel table.
                       cienaCesMplsDynamicIngressTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.1 unsigned32 no-access
This represents the unique index in the table.
                       cienaCesMplsDynamicIngressTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.2 displaystring read-only
This represents the dynamic encap tunnel name.
                       cienaCesMplsDynamicIngressTunnelWeight 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.3 integer read-only
A parameter to select the order of precedence of encap tunnels during tunnel switchover or reversion (if tunnel reversion is enabled). A higher weight indicates higher preference during switchover or reversion.
                       cienaCesMplsDynamicIngressTunnelLspId 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.4 unsigned32 read-only
A unique index within a tunnel group.
                       cienaCesMplsDynamicIngressTunnelNextHopIp 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.5 ipaddress read-only
Specifies the next hop IP address for the dynamic encap tunnel.
                       cienaCesMplsDynamicIngressTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.6 cienaglobalstate read-only
Specifies the administrative status of the dynamic encap tunnel.
                       cienaCesMplsDynamicIngressTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.7 cienaglobalstate read-only
Specifies the operational status of the dynamic encap tunnel.
                       cienaCesMplsDynamicIngressTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.8 ipaddress read-only
Destination IP address of the dynamic encap tunnel. If not specified, the dynamic encap tunnel inherits the IP address of the tunnel group. This object cannot be modified once the dynamic encap tunnel entry is created.
                       cienaCesMplsDynamicIngressTunnelLabel 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.9 integer read-only
Label for the dynamic encap tunnel.
                       cienaCesMplsDynamicIngressTunnelFrmCosPolicy 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.10 integer read-only
Frame CoS policy of the dynamic encap tunnel. Enumeration: 'fixed': 1, 'rcos-mapped': 2.
                       cienaCesMplsDynamicIngressTunnelFrmCosMapId 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.11 integer read-only
The frame CoS map ID of the dynamic encap tunnel. This value is valid if the frame CoS policy selected for the dynamic encap tunnel is rcos-mapped. This value corresponds to the index cienaCesTceDpTsCosMapFcosMapId of the cienaCesTceDpTsCosMapFcosMapTable.
                       cienaCesMplsDynamicIngressTunnelFixedExp 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.12 unsigned32 read-only
This object is deprecated and the new object to provide this information is cienaCesMplsDynamicIngressTunnelFixedTC in this table.
                       cienaCesMplsDynamicIngressTunnelSetupPriority 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.13 unsigned32 read-only
Indicates the set up priority of the dynamic encap tunnel.
                       cienaCesMplsDynamicIngressTunnelHoldPriority 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.14 unsigned32 read-only
Indicates the holding priority of the dynamic encap tunnel.
                       cienaCesMplsDynamicIngressTunnelRecordRoute 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.15 integer read-only
Indicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel. Enumeration: 'on': 1, 'off': 2.
                       cienaCesMplsDynamicIngressTunnelFastRoute 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.16 integer read-only
Indicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the dynamic encap tunnel entry is created. Enumeration: 'none': 1, 'node-protect': 3, 'link-protect': 2.
                       cienaCesMplsDynamicIngressTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.17 integer read-only
Specifies whether TTL is fixed or inherited from the frame. Enumeration: 'fixed': 1, 'inherit': 2.
                       cienaCesMplsDynamicIngressTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.18 unsigned32 read-only
If the TTL policy for the dynamic encap tunnel is fixed, this object is the TTL value.
                       cienaCesMplsDynamicIngressTunnelPathIndex 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.19 unsigned32 read-only
Index into the cienaCesmplsTunnelPathTable entry that specifies the explicit route hops for this dynamic encap tunnel.
                       cienaCesMplsDynamicIngressTunnelPathName 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.20 displaystring read-only
The path name corresponding to the pathIndex object.
                       cienaCesMplsDynamicIngressTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.21 unsigned32 read-only
The group id of the tunnel group of which the dynamic encap tunnel is a member.
                       cienaCesMplsDynamicIngressTunnelResourcePointer 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.23 rowpointer read-only
The OID must be one of the entries in mplsTunnelResourceTable.
                       cienaCesMplsDynamicIngressTunnelReversion 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.24 integer read-only
Indicates whether tunnel reversion is turned on/off for this encap tunnel. Enumeration: 'on': 1, 'off': 2.
                       cienaCesMplsDynamicIngressTunnelReversionTimeout 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.25 integer read-only
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
                       cienaCesMplsDynamicIngressTunnelBandwidthProfile 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.26 displaystring read-only
This object represents the bandwidth profile attached to this tunnel.
                       cienaCesMplsDynamicIngressTunnelPrimaryTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.27 displaystring read-only
This object represents the primary tunnel it is protecting, if this is a backup tunnel.
                       cienaCesMplsDynamicIngressTunnelFixedTC 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.28 unsigned32 read-only
If the frame CoS policy for the dynamic encap tunnel is fixed, this value is used for MPLS encapsulation.
                       cienaCesMplsDynamicIngressTunnelProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.29 integer read-only
specifies the protection role of the static encap tunnel Enumeration: 'none': 0, 'backup': 2, 'primary': 1.
                       cienaCesMplsDynamicIngressTunnelProtectionState 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.30 integer read-only
specifies the protection status of the static encap tunnel Enumeration: 'standby': 0, 'active': 1.
                       cienaCesMplsDynamicIngressTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.31 displaystring read-only
This object represents the primary tunnel it is protecting, if this is a backup tunnel.
                       cienaCesMplsDynamicIngressTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.32 integer read-only
This object represents Cos profile index
                       cienaCesMplsDynamicIngressTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.33 displaystring read-only
Specifies the name of Cos profile
               cienaCesMplsStaticEgressTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.4 no-access
The (conceptual) table listing the MPLS decap tunnels.
                   cienaCesMplsStaticEgressTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.4.1 no-access
An entry in the static decap tunnel table.
                       cienaCesMplsStaticEgressTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.4.1.1 unsigned32 no-access
This represents the unique index in the table.
                       cienaCesMplsStaticEgressTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.4.1.2 displaystring read-only
This represents the decap tunnel name.
                       cienaCesMplsStaticEgressTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.4.1.3 cienaglobalstate read-only
Administrative status of the static decap tunnel.
                       cienaCesMplsStaticEgressTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.4.1.4 cienaglobalstate read-only
Indicates the operational status of the static decap tunnel.
                       cienaCesMplsStaticEgressTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.4.1.5 ipaddress read-only
Source IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
                       cienaCesMplsStaticEgressTunnelLabel 1.3.6.1.4.1.1271.2.1.18.1.1.4.1.6 unsigned32 read-only
Indicates the label of the static decap tunnel.
               cienaCesMplsDynamicEgressTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.5 no-access
The (conceptual) table listing the MPLS dynamic decap tunnels.
                   cienaCesMplsDynamicEgressTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.5.1 no-access
An entry in the dynamic decap tunnel table.
                       cienaCesMplsDynamicEgressTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.5.1.1 unsigned32 no-access
This represents the unique index in the table.
                       cienaCesMplsDynamicEgressTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.5.1.2 displaystring read-only
This represents the dynamic decap tunnel name.
                       cienaCesMplsDynamicEgressTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.5.1.3 cienaglobalstate read-only
Indicates the administrative status of the dynamic decap tunnel.
                       cienaCesMplsDynamicEgressTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.5.1.4 cienaglobalstate read-only
Indicates the operational status of the dynamic decap tunnel.
                       cienaCesMplsDynamicEgressTunnelInstance 1.3.6.1.4.1.1271.2.1.18.1.1.5.1.5 unsigned32 read-only
Indicates the LSP ID.
                       cienaCesMplsDynamicEgressTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.5.1.6 ipaddress read-only
Source IP address of the dynamic decap tunnel.
                       cienaCesMplsDynamicEgressTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.5.1.7 ipaddress read-only
Destination IP address of the dynamic decap tunnel.
                       cienaCesMplsDynamicEgressTunnelLabel 1.3.6.1.4.1.1271.2.1.18.1.1.5.1.8 unsigned32 read-only
Idicates the label of the dynamic decap tunnel.
               cienaCesMplsStaticTransitTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.6 no-access
The (conceptual) table listing the MPLS static transit tunnels.
                   cienaCesMplsStaticTransitTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.6.1 no-access
An entry in the static transit tunnel table.
                       cienaCesMplsStaticTransitTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.1 unsigned32 no-access
This represents the unique index in the table.
                       cienaCesMplsStaticTransitTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.2 displaystring read-only
This represents the static transit tunnel name.
                       cienaCesMplsStaticTransitTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.3 cienaglobalstate read-only
Indicates the administrative status of the static transit tunnel.
                       cienaCesMplsStaticTransitTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.4 cienaglobalstate read-only
Indicates the operational status of the static transit tunnel.
                       cienaCesMplsStaticTransitTunnelNextHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.5 ipaddress read-only
Next hop IP address of the static transit tunnel.
                       cienaCesMplsStaticTransitTunnelInLabel 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.6 integer read-only
Indicates the incoming label of the static transit tunnel.
                       cienaCesMplsStaticTransitTunnelOutLabel 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.7 integer read-only
Indicates the outgoing label of the static transit tunnel.
                       cienaCesMplsStaticTransitTunnelFcosPolicy 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.8 fcospolicy read-only
Frame CoS policy of the static transit tunnel.
                       cienaCesMplsStaticTransitTunnelFixedTc 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.9 unsigned32 read-only
If frame CoS policy for the static transit tunnel is fixed, this value is used for MPLS encapsulation.
                       cienaCesMplsStaticTransitTunnelFrmCosMapId 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.10 integer read-only
The frame CoS map ID of the static transit tunnel. This value is valid if the frame cos policy selected for the static transit tunnel is rcos-mapped.
                       cienaCesMplsStaticTransitTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.11 ttlpolicy read-only
Specifies whether TTL is fixed or inherited from the frame.
                       cienaCesMplsStaticTransitTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.12 unsigned32 read-only
If the TTL policy for the static transit tunnel is fixed, then this object is the TTL value.
                       cienaCesMplsStaticTransitTunnelRcosPolicy 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.13 fcospolicy read-only
Resolved CoS policy of the static transit tunnel.
                       cienaCesMplsStaticTransitTunnelRCosMapId 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.14 integer read-only
The resolved CoS map ID of the static transit tunnel. This value is valid if the resolved CoS policy selected for the static transit tunnel is rcos-mapped.
                       cienaCesMplsStaticTransitTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.15 integer read-only
This object represents Cos profile index
                       cienaCesMplsStaticTransitTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.16 displaystring read-only
Specifies the name of Cos profile
                       cienaCesMplsStaticTransitTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.17 ipaddress read-only
Source IP address of the static transit tunnel.
                       cienaCesMplsStaticTransitTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.18 ipaddress read-only
Destination IP address of the static transit tunnel.
                       cienaCesMplsStaticTransitTunnelIncomingPackets 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.19 unsigned32 read-only
The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.
                       cienaCesMplsStaticTransitTunnelOutgoingPackets 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.20 unsigned32 read-only
The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
                       cienaCesMplsStaticTransitTunnelIncomingBytes 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.21 unsigned32 read-only
The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
                       cienaCesMplsStaticTransitTunnelOutgoingBytes 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.22 unsigned32 read-only
The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
               cienaCesMplsDynamicTransitTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.7 no-access
The (conceptual) table listing the MPLS dynamic transit tunnels.
                   cienaCesMplsDynamicTransitTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.7.1 no-access
An entry in the dynamic transit tunnel table.
                       cienaCesMplsDynamicTransitTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.1 unsigned32 no-access
This represents the unique index in the table.
                       cienaCesMplsDynamicTransitTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.2 displaystring read-only
This represents the dynamic transit tunnel name.
                       cienaCesMplsDynamicTransitTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.3 cienaglobalstate read-only
Indicates the administrative status of the dynamic transit tunnel.
                       cienaCesMplsDynamicTransitTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.4 cienaglobalstate read-only
Indicates the operational status of the dynamic transit tunnel.
                       cienaCesMplsDynamicTransitTunnelInLabel 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.5 integer read-only
Indicates the incoming label of the dynamic transit tunnel.
                       cienaCesMplsDynamicTransitTunnelOutLabel 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.6 integer read-only
Indicates the outgoing label of the dynamic transit tunnel.
                       cienaCesMplsDynamicTransitTunnelNextHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.7 ipaddress read-only
Next hop IP address of the Dynamic transit tunnel.
                       cienaCesMplsDynamicTransitTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.8 ipaddress read-only
Source IP address of the static transit tunnel.
                       cienaCesMplsDynamicTransitTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.9 ipaddress read-only
Destination IP address of the static transit tunnel.
                       cienaCesMplsDynamicTransitTunnelIncomingPackets 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.10 unsigned32 read-only
The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.
                       cienaCesMplsDynamicTransitTunnelOutgoingPackets 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.11 unsigned32 read-only
The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
                       cienaCesMplsDynamicTransitTunnelIncomingBytes 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.12 unsigned32 read-only
The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
                       cienaCesMplsDynamicTransitTunnelOutgoingBytes 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.13 unsigned32 read-only
The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
               cienaCesMplsTunnelPath 1.3.6.1.4.1.1271.2.1.18.1.1.8
                   cienaCesMplsTunnelPathTable 1.3.6.1.4.1.1271.2.1.18.1.1.8.1 no-access
The (conceptual) table listing the MPLS tunnel paths. To create an entry in the tunnel path table, cienaCesMplsTunnelPathName and cienaCesMplsTunnelPathRowStatus must both be specified.
                       cienaCesMplsTunnelPathEntry 1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1 no-access
An entry in the tunnel path table.
                           cienaCesMplsTunnelPathIndex 1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1.1 unsigned32 no-access
A unique index in the path entry table.
                           cienaCesMplsTunnelPathName 1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1.2 displaystring read-only
Name associated with the path.
                           cienaCesMplsTunnelPathUseCount 1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1.3 counter32 read-only
Indicates the number of encap tunnels that are using this path.
                   cienaCesMplsTunnelPathHopTable 1.3.6.1.4.1.1271.2.1.18.1.1.8.2 no-access
The (conceptual) table listing the MPLS tunnel path hop. To create an entry in the path-hop table, cienaCesMplsTunnelPathHopIpAddr and cienaCesMplsTunnelPathHopRowStatus must both be specified.
                       cienaCesMplsTunnelPathHopEntry 1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1 no-access
A tunnel hop entry.
                           cienaCesMplsTunnelPathHopIndex 1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1.1 unsigned32 no-access
Unique index in the path hop table.
                           cienaCesMplsTunnelPathHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1.2 ipaddress read-only
IP address associated with this hop. This object cannot be modified once the path hop is created.
                           cienaCesMplsTunnelPathHopType 1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1.3 integer read-only
Indidcates the hop type of the path member. This object cannot be modified once the path hop is created. Enumeration: 'strict': 1, 'loose': 2.
               cienaCesMplsEncapTunnelNotif 1.3.6.1.4.1.1271.2.1.18.1.1.9
                   cienaCesMplsNotifEncapTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.9.1 no-access
Table of notification objects required for encap tunnel notification.
                       cienaCesMplsNotifEncapTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1 no-access
An entry (conceptual row) in the cienaCesMplsNotifEncapTunnelTable. No Get, GetNext or Set is allowed on this table.
                           cienaCesMplsNotifEncapTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.1 unsigned32 no-access
Tunnel index of the encap tunnel associated with the notification.
                           cienaCesMplsNotifEncapTunnelType 1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.2 integer no-access
Encap tunnel type of the encap tunnel associated with the notification. Enumeration: 'dynamic': 2, 'static': 1, 'frr': 3.
                           cienaCesMplsNotifEncapTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.3 displaystring no-access
This represents the encap tunnel name.
                           cienaCesMplsNotifEncapTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.4 cienaglobalstate no-access
Administrative state of the encap tunnel.
                           cienaCesMplsNotifEncapTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.5 cienaglobalstate no-access
Operational state of the encap tunnel.
                           cienaCesMplsNotifEncapTunnelOamFaulted 1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.6 tunneloamfault no-access
Indication if the tunnel has Oam fault.
                           cienaCesMplsNotifEncapTunnelFaultedNodeId 1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.7 ipaddress no-access
IP address of the node with the AIS fault.
               cienaCesMplsTransitTunnelNotif 1.3.6.1.4.1.1271.2.1.18.1.1.10
                     cienaCesMplsNotifTransitTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.10.1 no-access
Table of notification objects required for transit tunnel notification.
                         cienaCesMplsNotifTransitTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1 no-access
An entry (conceptual row) in the cienaCesMplsNotifTransitTunnelTable. No Get, GetNext or Set is allowed on this table.
                             cienaCesMplsNotifTransitTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.1 unsigned32 no-access
Tunnel index of the transit tunnel associated with the notification.
                             cienaCesMplsNotifTransitTunnelType 1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.2 integer no-access
Transit tunnel type of the transit tunnel associated with the notification. Enumeration: 'dynamic': 2, 'static': 1.
                             cienaCesMplsNotifTransitTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.3 displaystring no-access
This represents the transit tunnel name.
                             cienaCesMplsNotifTransitTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.4 cienaglobalstate no-access
Administrative state of the transit tunnel.
                             cienaCesMplsNotifTransitTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.5 cienaglobalstate no-access
Operational state of the transit tunnel.
                             cienaCesMplsNotifTransitTunnelOamFaulted 1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.6 tunneloamfault no-access
Indication if the tunnel has Oam fault.
               cienaCesMplsEncapTunnelGrpNotif 1.3.6.1.4.1.1271.2.1.18.1.1.11
                     cienaCesMplsNotifEncapTunnelGrpTable 1.3.6.1.4.1.1271.2.1.18.1.1.11.1 no-access
Table of notification objects required for encap tunnel group notification.
                         cienaCesMplsNotifEncapTunnelGrpEntry 1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1 no-access
An entry (conceptual row) in the cienaCesMplsNotifEncapTunnelGrpTable. No Get, GetNext or Set is allowed on this table.
                             cienaCesMplsNotifEncapTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.1 unsigned32 no-access
Tunnel group index of the encap tunnel associated with the notification.
                             cienaCesMplsNotifEncapTunnelGrpName 1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.2 displaystring no-access
Tunnel group name of the encap tunnel associated with the notification.
                             cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlIndex 1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.3 unsigned32 no-access
Active Encap Tunnel index of the tunnel group associated with the notification.
                             cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlName 1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.4 displaystring no-access
Active Encap Tunnel name of the Tunnel group associated with the notification.
                             cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlType 1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.5 integer no-access
Encap tunnel type of the encap tunnel associated with the notification. Enumeration: 'dynamic': 2, 'static': 1, 'frr': 3.
               cienaCesMplsAssociatedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.12 no-access
The table listing the MPLS Associated tunnels.
                     cienaCesMplsAssociatedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.12.1 no-access
This represents an entry of the MPLS associated tunnel table.
                         cienaCesMplsAssociatedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.1 unsigned32 no-access
Unique index in the table. Specifies mpls associated tunnel index
                         cienaCesMplsAssociatedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.2 displaystring read-only
specifies mpls associated tunnel name.
                         cienaCesMplsAssociatedForwardTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.3 displaystring read-only
specifies associated forward tunnel.
                         cienaCesMplsAssociatedForwardTunnelType 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.4 displaystring read-only
specifies associated forward tunnel type.
                         cienaCesMplsAssociatedReverseTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.5 displaystring read-only
specifies associated reverse tunnel.
                         cienaCesMplsAssociatedReverseTunnelType 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.6 displaystring read-only
specifies associated reverse tunnel type.
                         cienaCesMplsAssociatedForwardTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.7 ipaddress read-only
specifies associated mpls forward tunnel destination IP address
                         cienaCesMplsAssociatedDynamicTunnelSrcIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.8 ipaddress read-only
specifies associated mpls reverse tunnel source IP address.
                         cienaCesMplsAssociatedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.9 cienaglobalstate read-only
Administrative status of associated tunnel.
                         cienaCesMplsAssociatedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.10 cienaglobalstate read-only
Operational status of associated tunnel.
                         cienaCesMplsAssociatedForwardTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.11 cienaglobalstate read-only
Operational status of associated forward tunnel.
                         cienaCesMplsAssociatedReverseTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.12 cienaglobalstate read-only
Operational status of associated reverse tunnel.
                         cienaCesMplsAssociatedProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.13 integer read-only
specifies the protection role of the associated tunnel Enumeration: 'none': 0, 'backup': 2, 'primary': 1.
                         cienaCesMplsAssociatedProtectionState 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.14 integer read-only
specifies the protection status of the associated tunnel Enumeration: 'standby': 0, 'active': 1.
                         cienaCesMplsAssociatedTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.15 displaystring read-only
This object represents the tunnel name it is protecting
                         cienaCesMplsAssociatedBfdMonitoring 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.16 cienaglobalstate read-only
Specifies status of BFD monitoring.
                         cienaCesMplsAssociatedBfdProfileName 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.17 displaystring read-only
This object represent BFD profile name.
                         cienaCesMplsAssociatedBfdSessionName 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.18 displaystring read-only
Specifies BFD session name.
                         cienaCesMplsAssociatedBfdSessionFaulted 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.19 integer read-only
Indicates if BFD is faulted.
                         cienaCesMplsAssociatedBfdProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.20 unsigned32 read-only
This represents the BFD profile index in the BFD profile table configured for this associated tunnel
               cienaCesMplsTunnelARHopTable 1.3.6.1.4.1.1271.2.1.18.1.1.13 no-access
The mplsTunnelARHopTable is used to indicate the hops for an MPLS tunnel defined in mplsTunnelTable, as reported by the MPLS signalling protocol. Thus at a transit LSR, this table (if the table is supported and if the signaling protocol is recording actual route information) contains the actual route of the whole tunnel. If the signaling protocol is not recording the actual route, this table MAY report the information from the mplsTunnelHopTable or the mplsTunnelCHopTable. Each row in this table is indexed by mplsTunnelARHopListIndex. Each row also has a secondary index mplsTunnelARHopIndex, corresponding to the next hop that this row corresponds to. Please note that since the information necessary to build entries within this table is not provided by some MPLS signalling protocols, implementation of this table is optional. Furthermore, since the information in this table is actually provided by the MPLS signalling protocol after the path has been set-up, the entries in this table are provided only for observation, and hence, all variables in this table are accessible exclusively as read- only. Note also that the contencts of this table may change while it is being read because of re-routing activities. A network administrator may verify that the actual route read is consistent by reference to the mplsTunnelLastPathChange object.
                     cienaCesMplsTunnelARHopEntry 1.3.6.1.4.1.1271.2.1.18.1.1.13.1 no-access
An entry in this table represents a tunnel hop. An entry is created by the agent for signaled ERLSP set up by an MPLS signalling protocol.
                         cienaMplsTunnelARHopListIndex 1.3.6.1.4.1.1271.2.1.18.1.1.13.1.1 unsigned32 no-access
Primary index into this table identifying a particular recorded hop list.
                         cienaMplsTunnelARHopIndex 1.3.6.1.4.1.1271.2.1.18.1.1.13.1.2 unsigned32 no-access
Secondary index into this table identifying the particular hop.
                         cienaMplsTunnelARHopAddrType 1.3.6.1.4.1.1271.2.1.18.1.1.13.1.3 integer read-only
The Hop Address Type of this tunnel hop. Note that lspid(5) is a valid option only for tunnels signaled via CRLDP.
                         cienaMplsTunnelARHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.13.1.4 ipaddress read-only
The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding mplsTunnelARHopAddrType. If mplsTunnelARHopAddrType is set to unnum(4), then this value contains the LSR Router ID of the unnumbered interface. Otherwise the agent SHOULD set this object to the zero-length string and the manager should ignore this object.
                         cienaMplsTunnelARHopAddrUnnum 1.3.6.1.4.1.1271.2.1.18.1.1.13.1.5 unsigned32 read-only
If mplsTunnelARHopAddrType is set to unnum(4), then this value will contain the interface identifier of the unnumbered interface for this hop. This object should be used in conjunction with mplsTunnelARHopIpAddr which would contain the LSR Router ID in this case. Otherwise the agent should set this object to zero-length string and the manager should ignore this.
                         cienaMplsTunnelARHopLspId 1.3.6.1.4.1.1271.2.1.18.1.1.13.1.6 unsigned32 read-only
If mplsTunnelARHopAddrType is set to lspid(5), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
               cienaCesMplsAssociatedTunnelNotif 1.3.6.1.4.1.1271.2.1.18.1.1.14
                     cienaCesMplsNotifAssociatedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.14.1 no-access
Table of notification objects required for associated tunnel notification.
                         cienaCesMplsNotifAssociatedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1 no-access
An entry (conceptual row) in the cienaCesMplsNotifAssociatedTunnelTable. No Get, GetNext or Set is allowed on this table.
                             cienaCesMplsNotifAssociatedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.1 unsigned32 no-access
Tunnel index of the associated tunnel associated with the notification.
                             cienaCesMplsNotifAssociatedTunnelType 1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.2 integer no-access
Associated tunnel type of the associated tunnel associated with the notification. Enumeration: 'dynamic': 2, 'static': 1.
                             cienaCesMplsNotifAssociatedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.3 displaystring no-access
This represents the associated tunnel name.
                             cienaCesMplsNotifAssociatedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.4 cienaglobalstate no-access
Administrative state of the associated tunnel.
                             cienaCesMplsNotifAssociatedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.5 cienaglobalstate no-access
Operational state of the associated tunnel.
                             cienaCesMplsNotifAssociatedTunnelOamFaulted 1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.6 tunneloamfault no-access
Indication if the tunnel has Oam fault.
                             cienaCesMplsNotifAssociatedTunnelFaultedNodeId 1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.7 ipaddress no-access
IP address of the node with the AIS fault.
               cienaCesMplsCacInterfaceNotif 1.3.6.1.4.1.1271.2.1.18.1.1.15
                     cienaCesMplsNotifCacInterfaceTable 1.3.6.1.4.1.1271.2.1.18.1.1.15.1 no-access
Table of notification objects required for CAC interface notification.
                         cienaCesMplsNotifCacInterfaceEntry 1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1 no-access
An entry (conceptual row) in the cienaCesMplsNotifCACInterfaceTable. No Get, GetNext or Set is allowed on this table.
                             cienaCesMplsNotifCacInterfaceIndex 1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.1 unsigned32 no-access
CAC entry index associated with the notification.
                             cienaCesMplsNotifCacInterfaceClassType 1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.2 unsigned32 no-access
CAC class type value of the associated interface associated with the notification.
                             cienaCesMplsNotifCacInterfaceName 1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.3 displaystring no-access
This represents the associated interface name.
                             cienaCesMplsNotifCacInterfaceThreshold 1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.4 unsigned32 no-access
Alarm threshold value of the associated interface associated with the notification.
               cienaCesMplsClassProfileTable 1.3.6.1.4.1.1271.2.1.18.1.1.16 no-access
The (conceptual) table listing the MPLS Class Profiles.
                     cienaCesMplsClassProfileEntry 1.3.6.1.4.1.1271.2.1.18.1.1.16.1 no-access
This represents an entry for MPLS Class Profile.
                         cienaCesMplsClassProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.1.16.1.1 unsigned32 no-access
This represents the unique index for MPLS Class Profile.
                         cienaCesMplsClassProfileName 1.3.6.1.4.1.1271.2.1.18.1.1.16.1.2 displaystring read-only
This represents the MPLS Class Profile name.
                         cienaCesMplsClassProfileCacPolicy 1.3.6.1.4.1.1271.2.1.18.1.1.16.1.3 cacpolicy read-only
MPLS Class Profile Cac policy.
               cienaCesMplsTEClassTypeTable 1.3.6.1.4.1.1271.2.1.18.1.1.17 no-access
The (conceptual) table listing the MPLS Class Types.
                     cienaCesMplsTEClassTypeEntry 1.3.6.1.4.1.1271.2.1.18.1.1.17.1 no-access
This represents an entry for MPLS Class Type.
                         cienaCesMplsClassType 1.3.6.1.4.1.1271.2.1.18.1.1.17.1.1 unsigned32 no-access
Indicates the MPLS Class Type value. Used as an Index in combination with MPLS Class Profile Index.
                         cienaCesMplsClassTypeQueueGroupIndex 1.3.6.1.4.1.1271.2.1.18.1.1.17.1.2 unsigned32 read-only
Indicates the queue group index associated with MPLS Class Type.
                         cienaCesMplsClassTypeQueueGroupInstance 1.3.6.1.4.1.1271.2.1.18.1.1.17.1.3 unsigned32 read-only
Indicates the instance for MPLS Class Type mapped to a particular queue group.
                         cienaCesMplsClassTypeLom 1.3.6.1.4.1.1271.2.1.18.1.1.17.1.4 unsigned32 read-only
Indicates the link multiplier value for the MPLS Class Type.
                         cienaCesMplsClassTypeAlarmThreshold 1.3.6.1.4.1.1271.2.1.18.1.1.17.1.5 unsigned32 read-only
Indicates the Alarm Threshold percentage (%) for MPLS Class Type.
           cienaCesGmpls 1.3.6.1.4.1.1271.2.1.18.1.2
               cienaCesGmplsStaticIngressUniDirTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.1 no-access
The (conceptual) table listing the MPLS static encap tunnels.
                   cienaCesGmplsStaticIngressUniDirTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.1.1 no-access
This represents an entry of the MPLS static encap TP unidirectional tunnel table.
                       cienaCesGmplsStaticIngressUniDirTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.1 unsigned32 no-access
Unique index in the table.
                       cienaCesGmplsStaticIngressUniDirTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.2 displaystring read-only
This represents the encap tunnel name. Tunnel names are common across static and dynamic.
                       cienaCesGmplsStaticIngressUniDirTunnelNextHopIp 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.3 ipaddress read-only
Specifies the next hop IP address for the static encap tunnel.
                       cienaCesGmplsStaticIngressUniDirTunnelSrcIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.4 ipaddress read-only
Source IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.
                       cienaCesGmplsStaticIngressUniDirTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.5 ipaddress read-only
Destination IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.
                       cienaCesGmplsStaticIngressUniDirTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.6 cienaglobalstate read-only
Specifies the administrative status of the static encap tunnel.
                       cienaCesGmplsStaticIngressUniDirTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.7 cienaglobalstate read-only
Specifies the operational status of the static encap tunnel.
                       cienaCesGmplsStaticIngressUniDirTunnelForwardOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.8 unsigned32 read-only
The label for the static encap tunnel.
                       cienaCesGmplsStaticIngressUniDirTunnelProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.9 integer read-only
The label for the static encap tunnel. Enumeration: 'none': 0, 'backup': 2, 'primary': 1.
                       cienaCesGmplsStaticIngressUniDirTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.10 displaystring read-only
Protection partner name of the static encap tunnel.
                       cienaCesGmplsStaticIngressUniDirTunnelProtectionState 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.11 integer read-only
Specifies the Protection status of the static encap tunnel. Enumeration: 'standby': 0, 'active': 1.
                       cienaCesGmplsStaticIngressUniDirTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.12 ttlpolicy read-only
Specifies whether TTL is fixed or inherited from the frame.
                       cienaCesGmplsStaticIngressUniDirTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.13 unsigned32 read-only
If the TTL policy for the static encap tunnel is fixed, then this object is the TTL value.
                       cienaCesGmplsStaticIngressUniDirTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.14 unsigned32 read-only
The group ID of the tunnel group of which the static encap tunnel is a member.
                       cienaCesGmplsStaticIngressUniDirTunnelReversion 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.15 integer read-only
Indicates whether tunnel reversion is turned on/off for this encap tunnel. Enumeration: 'on': 1, 'off': 2.
                       cienaCesGmplsStaticIngressUniDirTunnelReversionTimeout 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.16 unsigned32 read-only
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
                       cienaCesGmplsStaticIngressUniDirTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.17 integer read-only
This object represents Cos profile index
                       cienaCesGmplsStaticIngressUniDirTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.18 displaystring read-only
Specifies the name of Cos profile
                       cienaCesGmplsStaticIngressUniDirTunnelRecoveryDisjoint 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.19 integer read-only
Specifies the type of Recovery Disjoint Enumeration: 'node': 3, 'srlg': 4, 'none': 1, 'link': 2, 'unknown': 5.
               cienaCesGmplsStaticIngressCoroutedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.2 no-access
The (conceptual) table listing the MPLS static encap tunnels.
                   cienaCesGmplsStaticIngressCoroutedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.2.1 no-access
This represents an entry of the MPLS static encap tunnel table.
                       cienaCesGmplsStaticIngressCoroutedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.1 unsigned32 no-access
Unique index in the table.
                       cienaCesGmplsStaticIngressCoroutedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.2 displaystring read-only
This represents the encap tunnel name. Tunnel names are common across static and dynamic.
                       cienaCesGmplsStaticIngressCoroutedTunnelNextHopIp 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.3 ipaddress read-only
Specifies the next hop IP address for the static encap tunnel.
                       cienaCesGmplsStaticIngressCoroutedTunnelSrcIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.4 ipaddress read-only
Source IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.
                       cienaCesGmplsStaticIngressCoroutedTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.5 ipaddress read-only
Destination IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.
                       cienaCesGmplsStaticIngressCoroutedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.6 cienaglobalstate read-only
Specifies the administrative status of the static encap tunnel.
                       cienaCesGmplsStaticIngressCoroutedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.7 cienaglobalstate read-only
Specifies the operational status of the static encap tunnel.
                       cienaCesGmplsStaticIngressCoroutedTunnelForwardOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.8 unsigned32 read-only
The label for the static encap tunnel.
                       cienaCesGmplsStaticIngressCoroutedTunnelReverseInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.9 unsigned32 read-only
The label for the static encap tunnel.
                       cienaCesGmplsStaticIngressCoroutedTunnelProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.10 integer read-only
The label for the static encap tunnel. Enumeration: 'none': 0, 'backup': 2, 'primary': 1.
                       cienaCesGmplsStaticIngressCoroutedTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.11 displaystring read-only
Protection partner name of the static encap tunnel.
                       cienaCesGmplsStaticIngressCoroutedTunnelProtectionState 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.12 integer read-only
Specifies the Protection status of the static encap tunnel. Enumeration: 'standby': 0, 'active': 1.
                       cienaCesGmplsStaticIngressCoroutedTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.13 ttlpolicy read-only
Specifies whether TTL is fixed or inherited from the frame.
                       cienaCesGmplsStaticIngressCoroutedTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.14 unsigned32 read-only
If the TTL policy for the static encap tunnel is fixed, then this object is the TTL value.
                       cienaCesGmplsStaticIngressCoroutedTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.15 unsigned32 read-only
The group ID of the tunnel group of which the static encap tunnel is a member.
                       cienaCesGmplsStaticIngressCoroutedTunnelReversion 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.16 integer read-only
Indicates whether tunnel reversion is turned on/off for this encap tunnel. Enumeration: 'on': 1, 'off': 2.
                       cienaCesGmplsStaticIngressCoroutedTunnelReversionTimeout 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.17 unsigned32 read-only
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
                       cienaCesGmplsStaticIngressCoroutedTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.18 integer read-only
This object represents Cos profile index
                       cienaCesGmplsStaticIngressCoroutedTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.19 displaystring read-only
Specifies the name of Cos profile
                       cienaCesGmplsStaticIngressCoroutedTunnelBfdMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.20 cienaglobalstate read-only
Specifies status of BFD monitoring.
                       cienaCesGmplsStaticIngressCoroutedTunnelBfdProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.21 displaystring read-only
This object represent BFD profile name.
                       cienaCesGmplsStaticIngressCoroutedTunnelBfdSessionName 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.22 displaystring read-only
Specifies BFD session name.
                       cienaCesGmplsStaticIngressCoroutedTunnelAisMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.23 cienaglobalstate read-only
Specifies status of AIS monitoring.
                       cienaCesGmplsStaticIngressCoroutedTunnelAisProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.24 displaystring read-only
This object represent AIS profile name.
                       cienaCesGmplsStaticIngressCoroutedTunnelBfdSessionFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.25 integer read-only
Indicates if BFD is faulted.
                       cienaCesGmplsStaticIngressCoroutedTunnelBfdProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.26 unsigned32 read-only
This represents the BFD profile index in the BFD profile table configured for this gmpls static ingress corouted tunnel
                       cienaCesGmplsStaticIngressCoroutedTunnelRecoveryDisjoint 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.27 integer read-only
Specifies the type of Recovery Disjoint Enumeration: 'node': 3, 'srlg': 4, 'none': 1, 'link': 2, 'unknown': 5.
                       cienaCesGmplsStaticIngressCoroutedTunnelNextHopIfNum 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.28 unsigned32 read-only
This represents next hop interface number for this gmpls static ingress corouted tunnel
                       cienaCesGmplsStaticIngressCoroutedTunnelLspId 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.29 unsigned32 read-only
This represents LSP ID for this gmpls static ingress corouted tunnel
                       cienaCesGmplsStaticIngressCoroutedTunnelSrcTunnelId 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.30 unsigned32 read-only
This represents source tunnel ID for this gmpls static ingress corouted tunnel
                       cienaCesGmplsStaticIngressCoroutedTunnelDestTunnelId 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.31 unsigned32 read-only
This represents destination tunnel ID for this gmpls static ingress corouted tunnel
               cienaCesGmplsDynamicIngressUniDirTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.3 no-access
The (conceptual) table listing the MPLS Dynamic encap tunnels.
                   cienaCesGmplsDynamicIngressUniDirTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.3.1 no-access
This represents an entry of the MPLS Dynamic encap tunnel table.
                       cienaCesGmplsDynamicIngressUniDirTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.1 unsigned32 no-access
Unique index in the table.
                       cienaCesGmplsDynamicIngressUniDirTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.2 displaystring read-only
This represents the encap tunnel name. Tunnel names are common across Dynamic and dynamic.
                       cienaCesMplsDynamicIngressUniDirTunnelLspId 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.3 unsigned32 read-only
A unique index within a tunnel group.
                       cienaCesGmplsDynamicIngressUniDirTunnelNextHopIp 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.4 ipaddress read-only
Specifies the next hop IP address for the Dynamic encap tunnel.
                       cienaCesGmplsDynamicIngressUniDirTunnelSrcIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.5 ipaddress read-only
Source IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel entry is created.
                       cienaCesGmplsDynamicIngressUniDirTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.6 ipaddress read-only
Destination IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel entry is created.
                       cienaCesGmplsDynamicIngressUniDirTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.7 cienaglobalstate read-only
Specifies the administrative status of the Dynamic encap tunnel.
                       cienaCesGmplsDynamicIngressUniDirTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.8 cienaglobalstate read-only
Specifies the operational status of the Dynamic encap tunnel.
                       cienaCesGmplsDynamicIngressUniDirTunnelForwardOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.9 unsigned32 read-only
The label for the Dynamic encap tunnel.
                       cienaCesGmplsDynamicIngressUniDirTunnelProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.10 integer read-only
The label for the Dynamic encap tunnel. Enumeration: 'none': 0, 'backup': 2, 'primary': 1.
                       cienaCesGmplsDynamicIngressUniDirTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.11 displaystring read-only
Protection partner name of the Dynamic encap tunnel.
                       cienaCesGmplsDynamicIngressUniDirTunnelProtectionState 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.12 integer read-only
Specifies the Protection status of the Dynamic encap tunnel. Enumeration: 'standby': 0, 'active': 1.
                       cienaCesGmplsDynamicIngressUniDirTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.13 ttlpolicy read-only
Specifies whether TTL is fixed or inherited from the frame.
                       cienaCesGmplsDynamicIngressUniDirTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.14 unsigned32 read-only
If the TTL policy for the Dynamic encap tunnel is fixed, then this object is the TTL value.
                       cienaCesGmplsDynamicIngressUniDirTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.15 unsigned32 read-only
The group ID of the tunnel group of which the Dynamic encap tunnel is a member.
                       cienaCesGmplsDynamicIngressUniDirTunnelReversion 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.16 integer read-only
Indicates whether tunnel reversion is turned on/off for this encap tunnel. Enumeration: 'on': 1, 'off': 2.
                       cienaCesGmplsDynamicIngressUniDirTunnelReversionTimeout 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.17 unsigned32 read-only
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
                       cienaCesGmplsDynamicIngressUniDirTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.18 unsigned32 read-only
This object represents Cos profile index
                       cienaCesGmplsDynamicIngressUniDirTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.19 displaystring read-only
Specifies the name of Cos profile
                       cienaCesGmplsDynamicIngressUniDirTunnelRecordRoute 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.20 integer read-only
Indicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel. Enumeration: 'on': 1, 'off': 2.
                       cienaCesGmplsDynamicIngressUniDirTunnelFastRoute 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.21 integer read-only
Indicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the dynamic encap tunnel entry is created. Enumeration: 'none': 1, 'node-protect': 3, 'link-protect': 2.
                       cienaCesGmplsDynamicIngressUniDirTunnelSetupPriority 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.22 unsigned32 read-only
Indicates the set up priority of the dynamic encap tunnel.
                       cienaCesGmplsDynamicIngressUniDirTunnelHoldPriority 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.23 unsigned32 read-only
Indicates the holding priority of the dynamic encap tunnel.
                       cienaCesGmplsDynamicIngressUniDirTunnelPathIndex 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.24 unsigned32 read-only
Index into the cienaCesmplsTunnelPathTable entry that specifies the explicit route hops for this dynamic encap tunnel.
                       cienaCesGmplsDynamicIngressUniDirTunnelPathName 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.25 displaystring read-only
The path name corresponding to the pathIndex object.
                       cienaCesGmplsDynamicIngressUniDirTunnelBandwidthProfile 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.26 displaystring read-only
This object represents the bandwidth profile attached to this tunnel.
                       cienaCesGmplsDynamicIngressUniDirTunnelResourcePointer 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.27 rowpointer read-only
The OID must be one of the entries in mplsTunnelResourceTable.
               cienaCesGmplsDynamicIngressCoroutedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.4 no-access
The (conceptual) table listing the MPLS Dynamic encap co-routed tunnels.
                   cienaCesGmplsDynamicIngressCoroutedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.4.1 no-access
This represents an entry of the MPLS Dynamic encap co-routed tunnel table.
                       cienaCesGmplsDynamicIngressCoroutedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.1 unsigned32 no-access
Unique index in the table.
                       cienaCesGmplsDynamicIngressCoroutedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.2 displaystring read-only
This represents the encap tunnel name. Tunnel names are common across Dynamic and dynamic.
                       cienaCesGmplsDynamicIngressCoroutedTunnelNextHopIp 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.3 ipaddress read-only
Specifies the next hop IP address for the Dynamic encap tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelSrcIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.4 ipaddress read-only
Source IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel entry is created.
                       cienaCesGmplsDynamicIngressCoroutedTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.5 ipaddress read-only
Destination IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel entry is created.
                       cienaCesGmplsDynamicIngressCoroutedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.6 cienaglobalstate read-only
Specifies the administrative status of the Dynamic encap tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.7 cienaglobalstate read-only
Specifies the operational status of the Dynamic encap tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelForwardOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.8 unsigned32 read-only
The label for the Dynamic encap tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelReverseInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.9 unsigned32 read-only
The label for the Dynamic encap tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.10 integer read-only
The label for the Dynamic encap tunnel. Enumeration: 'none': 0, 'backup': 2, 'primary': 1.
                       cienaCesGmplsDynamicIngressCoroutedTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.11 displaystring read-only
Protection partner name of the Dynamic encap tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelProtectionState 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.12 integer read-only
Specifies the Protection status of the Dynamic encap tunnel. Enumeration: 'standby': 0, 'active': 1.
                       cienaCesGmplsDynamicIngressCoroutedTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.13 ttlpolicy read-only
Specifies whether TTL is fixed or inherited from the frame.
                       cienaCesGmplsDynamicIngressCoroutedTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.14 unsigned32 read-only
If the TTL policy for the Dynamic encap tunnel is fixed, then this object is the TTL value.
                       cienaCesGmplsDynamicIngressCoroutedTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.15 unsigned32 read-only
The group ID of the tunnel group of which the Dynamic encap tunnel is a member.
                       cienaCesGmplsDynamicIngressCoroutedTunnelReversion 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.16 integer read-only
Indicates whether tunnel reversion is turned on/off for this encap tunnel. Enumeration: 'on': 1, 'off': 2.
                       cienaCesGmplsDynamicIngressCoroutedTunnelReversionTimeout 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.17 unsigned32 read-only
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
                       cienaCesGmplsDynamicIngressCoroutedTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.18 unsigned32 read-only
This object represents Cos profile index
                       cienaCesGmplsDynamicIngressCoroutedTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.19 displaystring read-only
Specifies the name of Cos profile
                       cienaCesGmplsDynamicIngressCoroutedTunnelRecordRoute 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.20 integer read-only
Indicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel. Enumeration: 'on': 1, 'off': 2.
                       cienaCesGmplsDynamicIngressCoroutedTunnelFastRoute 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.21 integer read-only
Indicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the dynamic encap tunnel entry is created. Enumeration: 'none': 1, 'node-protect': 3, 'link-protect': 2.
                       cienaCesGmplsDynamicIngressCoroutedTunnelSetupPriority 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.22 unsigned32 read-only
Indicates the set up priority of the dynamic encap tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelHoldPriority 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.23 unsigned32 read-only
Indicates the holding priority of the dynamic encap tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelPathIndex 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.24 unsigned32 read-only
Index into the cienaCesmplsTunnelPathTable entry that specifies the explicit route hops for this dynamic encap tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelPathName 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.25 displaystring read-only
The path name corresponding to the pathIndex object.
                       cienaCesGmplsDynamicIngressCoroutedTunnelBandwidthProfile 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.26 displaystring read-only
This object represents the bandwidth profile attached to this tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelResourcePointer 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.27 rowpointer read-only
The OID must be one of the entries in mplsTunnelResourceTable.
                       cienaCesGmplsDynamicIngressCoroutedTunnelBfdMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.28 cienaglobalstate read-only
Specifies status of BFD monitoring.
                       cienaCesGmplsDynamicIngressCoroutedTunnelBfdProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.29 displaystring read-only
This object represent BFD profile name.
                       cienaCesGmplsDynamicIngressCoroutedTunnelBfdSessionName 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.30 displaystring read-only
Specifies BFD session name.
                       cienaCesGmplsDynamicIngressCoroutedTunnelBfdSessionFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.31 integer read-only
Indicates if BFD is faulted.
                       cienaCesGmplsDynamicIngressCoroutedTunnelBfdProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.32 unsigned32 read-only
This represents the BFD profile index in the BFD profile table configured for this gmpls dynamic ingress corouted tunnel
                       cienaCesGmplsDynamicIngressCoroutedTunnelAutoBackupEnable 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.33 integer read-only
Indicates if auto-backup is enabled for this tunnel and always remains 0 in case of backup tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelLspReoptimization 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.34 mplsglobalstate read-only
Indicates if Lsp-Reoptimization is enabled or disabled for this tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelLspReOptTimeInterval 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.35 unsigned32 read-only
Indicates Lsp-Reoptimization Time interval(in minutes) for this tunnel and always remains 0 in case of backup tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelPathDisjointType 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.36 pathdisjointtype read-only
Indicates path diversification criteria used for this tunnel. It can either be node based or srlg based or link based or combination.
                       cienaCesGmplsDynamicIngressCoroutedTunnelPathDisjointMode 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.37 pathdisjointmode read-only
Indicates mode used for path diversification for this tunnel .
                       cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeEnable 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.38 mplsglobalstate read-only
Indicates if auto-size is enabled for this tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeInterval 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.39 unsigned32 read-only
Indicates auto-sizing interval(in minutes) for this tunnel and always remains 0 in case of backup tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeFailureHdlr 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.40 autosizefailhdlr read-only
Indicates auto-sizing failure handler for this tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeState 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.41 autosizestate read-only
Indicates dynamic auto-sizing states for this tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeMode 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.42 autosizemode read-only
Indicates auto-sizing mode for this tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelMinBandwidth 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.43 mplsbitrate read-only
Indicates auto-size minimum bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelMaxBandwidth 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.44 mplsbitrate read-only
Indicates auto-size maximum bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelIncBandwidth 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.45 mplsbitrate read-only
Indicates auto-size increment bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelCurBandwidth 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.46 mplsbitrate read-only
Indicates auto-size current bandwidth(in kbps) for this tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelReqBandwidth 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.47 mplsbitrate read-only
Indicates auto-size requested bandwidth(in kbps) for this tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelUsedBandwidth 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.48 mplsbitrate read-only
Indicates auto-size used bandwidth(in kbps) for this tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelClassType 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.49 unsigned32 read-only
Indicates the DSTE class type (CT0-CT7) mapped to this Tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelResourceIncludeAll 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.50 unsigned32 read-only
Resource affinity Admin Color-Group which is applied in include-all colors mode to constrain path selection and always remains 0 in case of backup tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelResourceIncludeAny 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.51 unsigned32 read-only
Resource affinity Admin Color-Group which is applied in include-any colors mode to constrain path selection and always remains 0 in case of backup tunnel.
                       cienaCesGmplsDynamicIngressCoroutedTunnelResourceExcludeAny 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.52 unsigned32 read-only
Resource affinity Admin Color-Group which is applied in exclude-any colors mode to constrain path selection and always remains 0 in case of backup tunnel.
                       cienaCesGmplsDynamicIngressCoroutedLspId 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.53 unsigned32 read-only
Indicates the Ingress LSP ID.
               cienaCesGmplsStaticEgressUniDirTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.5 no-access
The (conceptual) table listing the MPLS decap tunnels.
                   cienaCesGmplsStaticEgressUniDirTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.5.1 no-access
An entry in the static decap tunnel table.
                       cienaCesGmplsStaticEgressUniDirTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.5.1.1 unsigned32 no-access
This represents the unique index in the table.
                       cienaCesGmplsStaticEgressUniDirTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.5.1.2 displaystring read-only
This represents the decap tunnel name.
                       cienaCesGmplsStaticEgressUniDirTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.5.1.3 cienaglobalstate read-only
Administrative status of the static decap tunnel.
                       cienaCesGmplsStaticEgressUniDirTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.5.1.4 cienaglobalstate read-only
Indicates the operational status of the static decap tunnel.
                       cienaCesGmplsStaticEgressUniDirTunnelPrevHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.5.1.5 ipaddress read-only
Prev hop IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
                       cienaCesGmplsStaticEgressUniDirTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.5.1.6 ipaddress read-only
Source IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
                       cienaCesGmplsStaticEgressUniDirTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.5.1.7 ipaddress read-only
destination IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
                       cienaCesGmplsStaticEgressUniDirTunnelForwardInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.5.1.8 unsigned32 read-only
Indicates the label of the static decap tunnel.
               cienaCesGmplsStaticEgressCoroutedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.6 no-access
The (conceptual) table listing the MPLS decap tunnels.
                   cienaCesGmplsStaticEgressCoroutedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.6.1 no-access
An entry in the static decap tunnel table.
                       cienaCesGmplsStaticEgressCoroutedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.1 unsigned32 no-access
This represents the unique index in the table.
                       cienaCesGmplsStaticEgressCoroutedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.2 displaystring read-only
This represents the decap tunnel name.
                       cienaCesGmplsStaticEgressCoroutedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.3 cienaglobalstate read-only
Administrative status of the static decap tunnel.
                       cienaCesGmplsStaticEgressCoroutedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.4 cienaglobalstate read-only
Indicates the operational status of the static decap tunnel.
                       cienaCesGmplsStaticEgressCoroutedTunnelPrevHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.5 ipaddress read-only
Prev hop IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
                       cienaCesGmplsStaticEgressCoroutedTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.6 ipaddress read-only
Source IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
                       cienaCesGmplsStaticEgressCoroutedTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.7 ipaddress read-only
destination IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
                       cienaCesGmplsStaticEgressCoroutedTunnelForwardInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.8 unsigned32 read-only
Indicates the in label of the static decap tunnel.
                       cienaCesGmplsStaticEgressCoroutedTunnelReverseOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.9 unsigned32 read-only
Indicates the out label of the static decap tunnel.
                       cienaCesGmplsStaticEgressCoroutedTunnelProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.10 integer read-only
specifies protection tunnel role. Enumeration: 'none': 0, 'backup': 2, 'primary': 1.
                       cienaCesGmplsStaticEgressCoroutedTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.11 displaystring read-only
Protection partner name of the static encap tunnel.
                       cienaCesGmplsStaticEgressCoroutedTunnelProtectionState 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.12 integer read-only
Specifies the Protection status of the static encap tunnel. Enumeration: 'standby': 0, 'active': 1.
                       cienaCesGmplsStaticEgressCoroutedTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.13 unsigned32 read-only
The group ID of the tunnel group of which the Dynamic encap tunnel is a member.
                       cienaCesGmplsStaticEgressCoroutedTunnelReversion 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.14 integer read-only
Indicates whether tunnel reversion is turned on/off for this encap tunnel. Enumeration: 'on': 1, 'off': 2.
                       cienaCesGmplsStaticEgressCoroutedTunnelReversionTimeout 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.15 unsigned32 read-only
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
                       cienaCesGmplsStaticEgressCoroutedTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.16 unsigned32 read-only
This object represents Cos profile index
                       cienaCesGmplsStaticEgressCoroutedTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.17 displaystring read-only
Specifies the name of Cos profile
                       cienaCesGmplsStaticEgressCoroutedTunnelBfdMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.18 cienaglobalstate read-only
Specifies status of BFD monitoring.
                       cienaCesGmplsStaticEgressCoroutedTunnelBfdProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.19 displaystring read-only
This object represent BFD profile name.
                       cienaCesGmplsStaticEgressCoroutedTunnelBfdSessionName 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.20 displaystring read-only
Specifies BFD session name.
                       cienaCesGmplsStaticEgressCoroutedTunnelAisMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.21 cienaglobalstate read-only
Specifies status of AIS monitoring.
                       cienaCesGmplsStaticEgressCoroutedTunnelAisProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.22 displaystring read-only
This object represent AIS profile name.
                       cienaCesGmplsStaticEgressCoroutedTunnelBfdSessionFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.23 integer read-only
Indicates if BFD is faulted.
                       cienaCesGmplsStaticEgressCoroutedTunnelBfdProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.24 unsigned32 read-only
This represents the BFD profile index in the BFD profile table configured for this gmpls static egress corouted tunnel
                       cienaCesGmplsStaticEgressCoroutedTunnelRecoveryDisjoint 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.25 integer read-only
Specifies the type of Recovery Disjoint Enumeration: 'node': 3, 'srlg': 4, 'none': 1, 'link': 2, 'unknown': 5.
                       cienaCesGmplsStaticEgressCoroutedTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.26 ttlpolicy read-only
Specifies whether TTL is fixed or inherited from the frame.
                       cienaCesGmplsStaticEgressCoroutedTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.27 unsigned32 read-only
If the TTL policy for the Dynamic encap tunnel is fixed, then this object is the TTL value.
                       cienaCesGmplsStaticEgressCoroutedTunnelPrevHopIfNum 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.28 unsigned32 read-only
This represents previous hop interface number for this gmpls static egress corouted tunnel.
                       cienaCesGmplsStaticEgressCoroutedTunnelLspId 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.29 unsigned32 read-only
This represents LSP ID for this gmpls static egress corouted tunnel.
                       cienaCesGmplsStaticEgressCoroutedTunnelSrcTunnelId 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.30 unsigned32 read-only
This represents source tunnel ID for this gmpls static egress corouted tunnel.
                       cienaCesGmplsStaticEgressCoroutedTunnelDestTunnelId 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.31 unsigned32 read-only
This represents source tunnel ID for this gmpls static egress corouted tunnel.
               cienaCesGmplsDynamicEgressUniDirTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.7 no-access
The (conceptual) table listing the MPLS dynamic decap tunnels.
                   cienaCesGmplsDynamicEgressUniDirTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.7.1 no-access
An entry in the dynamic decap tunnel table.
                       cienaCesGmplsDynamicEgressUniDirTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.7.1.1 unsigned32 no-access
This represents the unique index in the table.
                       cienaCesGmplsDynamicEgressUniDirTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.7.1.2 displaystring read-only
This represents the dynamic decap tunnel name.
                       cienaCesGmplsDynamicEgressUniDirTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.7.1.3 cienaglobalstate read-only
Indicates the administrative status of the dynamic decap tunnel.
                       cienaCesGmplsDynamicEgressUniDirTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.7.1.4 cienaglobalstate read-only
Indicates the operational status of the dynamic decap tunnel.
                       cienaCesGmplsDynamicEgressUniDirLspId 1.3.6.1.4.1.1271.2.1.18.1.2.7.1.5 unsigned32 read-only
Indicates the LSP ID.
                       cienaCesGmplsDynamicEgressUniDirTunnelPrevHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.7.1.6 ipaddress read-only
Source IP address of the dynamic decap tunnel.
                       cienaCesGmplsDynamicEgressUniDirTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.7.1.7 ipaddress read-only
Source IP address of the dynamic decap tunnel.
                       cienaCesGmplsDynamicEgressUniDirTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.7.1.8 ipaddress read-only
Destination IP address of the dynamic decap tunnel.
                       cienaCesGmplsDynamicEgressUniDirTunnelForwardInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.7.1.9 unsigned32 read-only
Idicates the label of the dynamic decap tunnel.
               cienaCesGmplsDynamicEgressCoroutedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.8 no-access
The (conceptual) table listing the MPLS dynamic decap tunnels.
                   cienaCesGmplsDynamicEgressCoroutedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.8.1 no-access
An entry in the dynamic decap tunnel table.
                       cienaCesGmplsDynamicEgressCoroutedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.1 unsigned32 no-access
This represents the unique index in the table.
                       cienaCesGmplsDynamicEgressCoroutedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.2 displaystring read-only
This represents the dynamic decap tunnel name.
                       cienaCesGmplsDynamicEgressCoroutedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.3 cienaglobalstate read-only
Indicates the administrative status of the dynamic decap tunnel.
                       cienaCesGmplsDynamicEgressCoroutedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.4 cienaglobalstate read-only
Indicates the operational status of the dynamic decap tunnel.
                       cienaCesGmplsDynamicEgressCoroutedLspId 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.5 unsigned32 read-only
Indicates the LSP ID.
                       cienaCesGmplsDynamicEgressCoroutedTunnelPrevHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.6 ipaddress read-only
Prev hop IP address of the dynamic decap tunnel.
                       cienaCesGmplsDynamicEgressCoroutedTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.7 ipaddress read-only
Source IP address of the dynamic decap tunnel.
                       cienaCesGmplsDynamicEgressCoroutedTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.8 ipaddress read-only
Destination IP address of the dynamic decap tunnel.
                       cienaCesGmplsDynamicEgressCoroutedTunnelForwardInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.9 unsigned32 read-only
Idicates the label of the dynamic decap tunnel.
                       cienaCesGmplsDynamicEgressCoroutedTunnelReverseOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.10 unsigned32 read-only
Indicates the out label of the dynamic decap tunnel.
                       cienaCesGmplsDynamicEgressCoroutedTunnelProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.11 integer read-only
specifies role of this dynamic tunnel Enumeration: 'none': 0, 'backup': 2, 'primary': 1.
                       cienaCesGmplsDynamicEgressCoroutedTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.12 displaystring read-only
Protection partner name of the dynamic encap tunnel.
                       cienaCesGmplsDynamicEgressCoroutedTunnelProtectionState 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.13 integer read-only
Specifies the Protection status of the static encap tunnel. Enumeration: 'standby': 0, 'active': 1.
                       cienaCesGmplsDynamicEgressCoroutedTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.14 unsigned32 read-only
The group ID of the tunnel group of which the Dynamic encap tunnel is a member.
                       cienaCesGmplsDynamicEgressCoroutedTunnelReversion 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.15 integer read-only
Indicates whether tunnel reversion is turned on/off for this encap tunnel. Enumeration: 'on': 1, 'off': 2.
                       cienaCesGmplsDynamicEgressCoroutedTunnelReversionTimeout 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.16 unsigned32 read-only
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
                       cienaCesGmplsDynamicEgressCoroutedTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.17 unsigned32 read-only
This object represents Cos profile index
                       cienaCesGmplsDynamicEgressCoroutedTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.18 displaystring read-only
Specifies the name of Cos profile
                       cienaCesGmplsDynamicEgressCoroutedTunnelBfdMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.19 cienaglobalstate read-only
This parameter indicates if BFD monitoring is enabled or disableb on tunnel
                       cienaCesGmplsDynamicEgressCoroutedTunnelBfdProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.20 displaystring read-only
It Indicates assigned BFD profile names to tunnel
                       cienaCesGmplsDynamicEgressCoroutedTunnelBfdSessionName 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.21 displaystring read-only
It Indicates BFD session names.
                       cienaCesGmplsDynamicEgressCoroutedTunnelBfdSessionFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.22 integer read-only
Specifies if BFD faulted
                       cienaCesGmplsDynamicEgressCoroutedTunnelBfdProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.23 unsigned32 read-only
This represents the BFD profile index in the BFD profile table configured for this gmpls dynamic egress corouted tunnel
                       cienaCesGmplsDynamicEgressCoroutedTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.24 ttlpolicy read-only
Specifies whether TTL is fixed or inherited from the frame.
                       cienaCesGmplsDynamicEgressCoroutedTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.25 unsigned32 read-only
If the TTL policy for the Dynamic encap tunnel is fixed, then this object is the TTL value.
               cienaCesGmplsStaticTransitUniDirTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.9 no-access
The (conceptual) table listing the MPLS static TransitUniDir tunnels.
                   cienaCesGmplsStaticTransitUniDirTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.9.1 no-access
An entry in the static TransitUniDir tunnel table.
                       cienaCesGmplsStaticTransitUniDirTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.1 unsigned32 no-access
This represents the unique index in the table.
                       cienaCesGmplsStaticTransitUniDirTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.2 displaystring read-only
This represents the static TransitUniDir tunnel name.
                       cienaCesGmplsStaticTransitUniDirTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.3 cienaglobalstate read-only
Indicates the administrative status of the static TransitUniDir tunnel.
                       cienaCesGmplsStaticTransitUniDirTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.4 cienaglobalstate read-only
Indicates the operational status of the static TransitUniDir tunnel.
                       cienaCesGmplsStaticTransitUniDirTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.5 ipaddress read-only
Source IP address of the static TransitUniDir tunnel.
                       cienaCesGmplsStaticTransitUniDirTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.6 ipaddress read-only
Destination IP address of the static TransitUniDir tunnel.
                       cienaCesGmplsStaticTransitUniDirTunnelNextHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.7 ipaddress read-only
Next hop IP address of the static TransitUniDir tunnel.
                       cienaCesGmplsStaticTransitUniDirTunnelPrevHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.8 ipaddress read-only
Previous hop IP address of the static TransitUniDir tunnel.
                       cienaCesGmplsStaticTransitUniDirTunnelForwardInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.9 unsigned32 read-only
Indicates the incoming label of the static TransitUniDir tunnel.
                       cienaCesGmplsStaticTransitUniDirTunnelForwardOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.10 unsigned32 read-only
Indicates the outgoing label of the static TransitUniDir tunnel.
                       cienaCesGmplsStaticTransitUniDirTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.11 ttlpolicy read-only
Specifies whether TTL is fixed or inherited from the frame.
                       cienaCesGmplsStaticTransitUniDirTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.12 unsigned32 read-only
If the TTL policy for the static TransitUniDir tunnel is fixed, then this object is the TTL value.
                       cienaCesGmplsStaticTransitUniDirTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.13 unsigned32 read-only
This object represents Cos profile index
                       cienaCesGmplsStaticTransitUniDirTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.14 displaystring read-only
Specifies the name of Cos profile
                       cienaCesGmplsStaticTransitUniDirTunnelAisMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.15 cienaglobalstate read-only
Specifies AIS monitoring's status.
                       cienaCesGmplsStaticTransitUniDirTunnelAisProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.16 displaystring read-only
This object contais AIS profile name.
                       cienaCesGmplsStaticTransitUniDirTunnelIncomingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.17 unsigned32 read-only
The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.
                       cienaCesGmplsStaticTransitUniDirTunnelOutgoingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.18 unsigned32 read-only
The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
                       cienaCesGmplsStaticTransitUniDirTunnelIncomingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.19 unsigned32 read-only
The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
                       cienaCesGmplsStaticTransitUniDirTunnelOutgoingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.20 unsigned32 read-only
The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
               cienaCesGmplsStaticTransitCoroutedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.10 no-access
The (conceptual) table listing the MPLS static TransitCorouted tunnels.
                     cienaCesGmplsStaticTransitCoroutedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.10.1 no-access
An entry in the static TransitCorouted tunnel table.
                         cienaCesGmplsStaticTransitCoroutedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.1 unsigned32 no-access
This represents the unique index in the table.
                         cienaCesGmplsStaticTransitCoroutedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.2 displaystring read-only
This represents the static TransitCorouted tunnel name.
                         cienaCesGmplsStaticTransitCoroutedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.3 cienaglobalstate read-only
Indicates the administrative status of the static TransitCorouted tunnel.
                         cienaCesGmplsStaticTransitCoroutedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.4 cienaglobalstate read-only
Indicates the operational status of the static TransitCorouted tunnel.
                         cienaCesGmplsStaticTransitCoroutedTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.5 ipaddress read-only
Source IP address of the static TransitCorouted tunnel.
                         cienaCesGmplsStaticTransitCoroutedTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.6 ipaddress read-only
Destination IP address of the static TransitCorouted tunnel.
                         cienaCesGmplsStaticTransitCoroutedTunnelNextHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.7 ipaddress read-only
Next hop IP address of the static TransitCorouted tunnel.
                         cienaCesGmplsStaticTransitCoroutedTunnelPrevHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.8 ipaddress read-only
Previous hop IP address of the static TransitCorouted tunnel.
                         cienaCesGmplsStaticTransitCoroutedTunnelForwardInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.9 unsigned32 read-only
Indicates the incoming label of the static TransitCorouted tunnel.
                         cienaCesGmplsStaticTransitCoroutedTunnelForwardOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.10 unsigned32 read-only
Indicates the outgoing label of the static TransitCorouted tunnel.
                         cienaCesGmplsStaticTransitCoroutedTunnelReverseInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.11 unsigned32 read-only
Indicates the incoming label of the static TransitCorouted tunnel.
                         cienaCesGmplsStaticTransitCoroutedTunnelReverseOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.12 unsigned32 read-only
Indicates the outgoing label of the static TransitCorouted tunnel.
                         cienaCesGmplsStaticTransitCoroutedTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.13 ttlpolicy read-only
Specifies whether TTL is fixed or inherited from the frame.
                         cienaCesGmplsStaticTransitCoroutedTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.14 unsigned32 read-only
If the TTL policy for the static TransitCorouted tunnel is fixed, then this object is the TTL value.
                         cienaCesGmplsStaticTransitCoroutedTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.15 unsigned32 read-only
This object represents Cos profile index
                         cienaCesGmplsStaticTransitCoroutedTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.16 displaystring read-only
Specifies the name of Cos profile
                         cienaCesGmplsStaticTransitCoroutedTunnelAisMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.17 cienaglobalstate read-only
specifies AIS monitoring.
                         cienaCesGmplsStaticTransitCoroutedTunnelAisProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.18 displaystring read-only
This object contains AIS profile name
                         cienaCesGmplsStaticTransitCoroutedTunnelPrevHopIfNum 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.19 unsigned32 read-only
This represents previous hop interface number for this gmpls transit corouted tunnel.
                         cienaCesGmplsStaticTransitCoroutedTunnelNextHopIfNum 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.20 unsigned32 read-only
This represents next hop interface number for this gmpls transit corouted tunnel.
                         cienaCesGmplsStaticTransitCoroutedTunnelLspId 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.21 unsigned32 read-only
This represents LSP ID for this gmpls transit corouted tunnel.
                         cienaCesGmplsStaticTransitCoroutedTunnelSrcTunnelId 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.22 unsigned32 read-only
This represents source tunnel ID for this gmpls transit corouted tunnel.
                         cienaCesGmplsStaticTransitCoroutedTunnelDestTunnelId 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.23 unsigned32 read-only
This represents destination tunnel ID for this gmpls transit corouted tunnel.
                         cienaCesGmplsStaticTransitCoroutedTunnelIncomingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.24 unsigned32 read-only
The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.
                         cienaCesGmplsStaticTransitCoroutedTunnelOutgoingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.25 unsigned32 read-only
The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
                         cienaCesGmplsStaticTransitCoroutedTunnelIncomingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.26 unsigned32 read-only
The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
                         cienaCesGmplsStaticTransitCoroutedTunnelOutgoingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.27 unsigned32 read-only
The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
                         cienaCesGmplsStaticTransitCoroutedTunnelReverseIncomingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.28 unsigned32 read-only
The number of reverse direction incoming packets for the given transit tunnel. This object is supported only on specific platforms.
                         cienaCesGmplsStaticTransitCoroutedTunnelReverseOutgoingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.29 unsigned32 read-only
The number of reverse direction outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
                         cienaCesGmplsStaticTransitCoroutedTunnelReverseIncomingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.30 unsigned32 read-only
The number of reverse direction incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
                         cienaCesGmplsStaticTransitCoroutedTunnelReverseOutgoingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.31 unsigned32 read-only
The number of reverse direction outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
               cienaCesGmplsDynamicTransitUniDirTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.11 no-access
The (conceptual) table listing the MPLS Dynamic TransitUniDir tunnels.
                     cienaCesGmplsDynamicTransitUniDirTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.11.1 no-access
An entry in the Dynamic TransitUniDir tunnel table.
                         cienaCesGmplsDynamicTransitUniDirTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.1 unsigned32 no-access
This represents the unique index in the table.
                         cienaCesGmplsDynamicTransitUniDirTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.2 displaystring read-only
This represents the Dynamic TransitUniDir tunnel name.
                         cienaCesGmplsDynamicTransitUniDirTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.3 cienaglobalstate read-only
Indicates the administrative status of the Dynamic TransitUniDir tunnel.
                         cienaCesGmplsDynamicTransitUniDirTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.4 cienaglobalstate read-only
Indicates the operational status of the Dynamic TransitUniDir tunnel.
                         cienaCesGmplsDynamicTransitUniDirTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.5 ipaddress read-only
Source IP address of the Dynamic TransitUniDir tunnel.
                         cienaCesGmplsDynamicTransitUniDirTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.6 ipaddress read-only
Destination IP address of the Dynamic TransitUniDir tunnel.
                         cienaCesGmplsDynamicTransitUniDirTunnelNextHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.7 ipaddress read-only
Next hop IP address of the Dynamic TransitUniDir tunnel.
                         cienaCesGmplsDynamicTransitUniDirTunnelForwardInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.8 unsigned32 read-only
Indicates the incoming label of the Dynamic TransitUniDir tunnel.
                         cienaCesGmplsDynamicTransitUniDirTunnelForwardOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.9 unsigned32 read-only
Indicates the outgoing label of the Dynamic TransitUniDir tunnel.
                         cienaCesGmplsDynamicTransitUniDirTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.10 ttlpolicy read-only
Specifies whether TTL is fixed or inherited from the frame.
                         cienaCesGmplsDynamicTransitUniDirTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.11 unsigned32 read-only
If the TTL policy for the Dynamic TransitUniDir tunnel is fixed, then this object is the TTL value.
                         cienaCesGmplsDynamicTransitUniDirTunnelIncomingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.12 unsigned32 read-only
The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.
                         cienaCesGmplsDynamicTransitUniDirTunnelOutgoingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.13 unsigned32 read-only
The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
                         cienaCesGmplsDynamicTransitUniDirTunnelIncomingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.14 unsigned32 read-only
The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
                         cienaCesGmplsDynamicTransitUniDirTunnelOutgoingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.15 unsigned32 read-only
The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
               cienaCesGmplsDynamicTransitCoroutedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.12 no-access
The (conceptual) table listing the MPLS Dynamic TransitCoRouted tunnels.
                     cienaCesGmplsDynamicTransitCoroutedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.12.1 no-access
An entry in the Dynamic TransitCorouted tunnel table.
                         cienaCesGmplsDynamicTransitCoroutedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.1 unsigned32 no-access
This represents the unique index in the table.
                         cienaCesGmplsDynamicTransitCoroutedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.2 displaystring read-only
This represents the Dynamic TransitCorouted tunnel name.
                         cienaCesGmplsDynamicTransitCoroutedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.3 cienaglobalstate read-only
Indicates the administrative status of the Dynamic TransitCorouted tunnel.
                         cienaCesGmplsDynamicTransitCoroutedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.4 cienaglobalstate read-only
Indicates the operational status of the Dynamic TransitCorouted tunnel.
                         cienaCesGmplsDynamicTransitCoroutedTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.5 ipaddress read-only
Source IP address of the Dynamic TransitCorouted tunnel.
                         cienaCesGmplsDynamicTransitCoroutedTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.6 ipaddress read-only
Destination IP address of the Dynamic TransitCorouted tunnel.
                         cienaCesGmplsDynamicTransitCoroutedTunnelNextHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.7 ipaddress read-only
Next hop IP address of the Dynamic TransitCorouted tunnel.
                         cienaCesGmplsDynamicTransitCoroutedTunnelPrevHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.8 ipaddress read-only
Previous hop IP address of the Dynamic TransitCorouted tunnel.
                         cienaCesGmplsDynamicTransitCoroutedTunnelForwardInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.9 unsigned32 read-only
Indicates the incoming label of the Dynamic TransitCorouted tunnel.
                         cienaCesGmplsDynamicTransitCoroutedTunnelForwardOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.10 unsigned32 read-only
Indicates the outgoing label of the Dynamic TransitCorouted tunnel.
                         cienaCesGmplsDynamicTransitCoroutedTunnelReverseInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.11 unsigned32 read-only
Indicates the incoming label of the Dynamic TransitCorouted tunnel.
                         cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.12 unsigned32 read-only
Indicates the outgoing label of the Dynamic TransitCorouted tunnel.
                         cienaCesGmplsDynamicTransitCoroutedTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.13 ttlpolicy read-only
Specifies whether TTL is fixed or inherited from the frame.
                         cienaCesGmplsDynamicTransitCoroutedTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.14 unsigned32 read-only
If the TTL policy for the Dynamic TransitCorouted tunnel is fixed, then this object is the TTL value.
                         cienaCesGmplsDynamicTransitCoroutedTunnelIncomingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.15 unsigned32 read-only
The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.
                         cienaCesGmplsDynamicTransitCoroutedTunnelOutgoingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.16 unsigned32 read-only
The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
                         cienaCesGmplsDynamicTransitCoroutedTunnelIncomingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.17 unsigned32 read-only
The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
                         cienaCesGmplsDynamicTransitCoroutedTunnelOutgoingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.18 unsigned32 read-only
The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
                         cienaCesGmplsDynamicTransitCoroutedTunnelReverseIncomingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.19 unsigned32 read-only
The number of reverse incoming packets for the given transit tunnel. This object is supported only on specific platforms.
                         cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutgoingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.20 unsigned32 read-only
The number of reverse outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
                         cienaCesGmplsDynamicTransitCoroutedTunnelReverseIncomingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.21 unsigned32 read-only
The number of reverse incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
                         cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutgoingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.22 unsigned32 read-only
The number of reverse outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
               cienaCesGmplsAssociatedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.13 no-access
The (conceptual) table listing the Gmpls Associated tunnels.
                     cienaCesGmplsAssociatedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.13.1 no-access
This represents an entry of the Gmpls static encap tunnel table.
                         cienaCesGmplsAssociatedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.1 unsigned32 no-access
Unique tunnel index in the table.
                         cienaCesGmplsAssociatedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.2 displaystring read-only
specifies Gmpls associated tunnel name.
                         cienaCesGmplsAssociatedForwardTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.3 displaystring read-only
specifies associated forward tunnel.
                         cienaCesGmplsAssociatedForwardTunnelType 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.4 displaystring read-only
specifies associated forward tunnel type.
                         cienaCesGmplsAssociatedReverseTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.5 displaystring read-only
specifies associated reverse tunnel.
                         cienaCesGmplsAssociatedReverseTunnelType 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.6 displaystring read-only
specifies associated reverse tunnel type.
                         cienaCesGmplsAssociatedForwardTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.7 ipaddress read-only
specifies associated Gmpls forward tunnel destination IP address
                         cienaCesGmplsAssociatedDynamicTunnelSrcIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.8 ipaddress read-only
specifies associated Gmpls reverse tunnel source IP address.
                         cienaCesGmplsAssociatedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.9 cienaglobalstate read-only
Administrator status of associated tunnel.
                         cienaCesGmplsAssociatedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.10 cienaglobalstate read-only
Operational status of associated tunnel.
                         cienaCesGmplsAssociatedForwardTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.11 cienaglobalstate read-only
Operational status of associated forward tunnel.
                         cienaCesGmplsAssociatedReverseTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.12 cienaglobalstate read-only
Operational status of associated reverse tunnel.
                         cienaCesGmplsAssociatedProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.13 integer read-only
specifies the protection role of the associated tunnel Enumeration: 'none': 0, 'backup': 2, 'primary': 1.
                         cienaCesGmplsAssociatedProtectionState 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.14 integer read-only
specifies the protection status of the associated tunnel Enumeration: 'standby': 0, 'active': 1.
                         cienaCesGmplsAssociatedTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.15 displaystring read-only
This object represents the tunnel name it is protecting
                         cienaCesGmplsAssociatedBfdMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.16 cienaglobalstate read-only
Specifies status of BFD monitoring.
                         cienaCesGmplsAssociatedBfdProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.17 displaystring read-only
This object represent BFD profile name.
                         cienaCesGmplsAssociatedBfdSessionName 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.18 displaystring read-only
Specifies BFD session name.
                         cienaCesGmplsAssociatedAisMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.19 cienaglobalstate read-only
Specifies status of AIS monitoring.
                         cienaCesGmplsAssociatedAisProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.20 displaystring read-only
This object represent BFD profile name.
                         cienaCesGmplsAssociatedBfdSessionFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.21 integer read-only
Specifies BFD session error code.
                         cienaCesGmplsAssociatedBfdProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.22 unsigned32 read-only
This represents the BFD profile index in the BFD profile table configured for this gmpls associated tunnel
               cienaCesGmplsTunnelARHopTable 1.3.6.1.4.1.1271.2.1.18.1.2.14 no-access
The GmplsTunnelARHopTable is used to indicate the hops for an Gmpls tunnel defined in GmplsTunnelTable, as reported by the Gmpls signalling protocol. Thus at a transit LSR, this table (if the table is supported and if the signaling protocol is recording actual route information) contains the actual route of the whole tunnel. If the signaling protocol is not recording the actual route, this table MAY report the information from the GmplsTunnelHopTable or the GmplsTunnelCHopTable. Each row in this table is indexed by GmplsTunnelARHopListIndex. Each row also has a secondary index GmplsTunnelARHopIndex, corresponding to the next hop that this row corresponds to. Please note that since the information necessary to build entries within this table is not provided by some Gmpls signalling protocols, implementation of this table is optional. Furthermore, since the information in this table is actually provided by the Gmpls signalling protocol after the path has been set-up, the entries in this table are provided only for observation, and hence, all variables in this table are accessible exclusively as read- only. Note also that the contencts of this table may change while it is being read because of re-routing activities. A network administrator may verify that the actual route read is consistent by reference to the GmplsTunnelLastPathChange object.
                     cienaCesGmplsTunnelARHopEntry 1.3.6.1.4.1.1271.2.1.18.1.2.14.1 no-access
An entry in this table represents a tunnel hop. An entry is created by the agent for signaled ERLSP set up by an Gmpls signalling protocol.
                         cienaGmplsTunnelARHopListIndex 1.3.6.1.4.1.1271.2.1.18.1.2.14.1.1 unsigned32 no-access
Primary index into this table identifying a particular recorded hop list.
                         cienaGmplsTunnelARHopIndex 1.3.6.1.4.1.1271.2.1.18.1.2.14.1.2 unsigned32 no-access
Secondary index into this table identifying the particular hop.
                         cienaGmplsTunnelARHopAddrType 1.3.6.1.4.1.1271.2.1.18.1.2.14.1.3 integer read-only
The Hop Address Type of this tunnel hop. Note that lspid(5) is a valid option only for tunnels signaled via CRLDP.
                         cienaGmplsTunnelARHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.14.1.4 ipaddress read-only
The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding GmplsTunnelARHopAddrType. If GmplsTunnelARHopAddrType is set to unnum(4), then this value contains the LSR Router ID of the unnumbered interface. Otherwise the agent SHOULD set this object to the zero-length string and the manager should ignore this object.
                         cienaGmplsTunnelARHopAddrUnnum 1.3.6.1.4.1.1271.2.1.18.1.2.14.1.5 unsigned32 read-only
If GmplsTunnelARHopAddrType is set to unnum(4), then this value will contain the interface identifier of the unnumbered interface for this hop. This object should be used in conjunction with GmplsTunnelARHopIpAddr which would contain the LSR Router ID in this case. Otherwise the agent should set this object to zero-length string and the manager should ignore this.
                         cienaGmplsTunnelARHopLspId 1.3.6.1.4.1.1271.2.1.18.1.2.14.1.6 unsigned32 read-only
If GmplsTunnelARHopAddrType is set to lspid(5), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
               cienaCesGmplsEncapTunnelNotif 1.3.6.1.4.1.1271.2.1.18.1.2.15
                     cienaCesGmplsNotifEncapTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.15.1 no-access
Table of notification objects required for encap tunnel notification.
                         cienaCesGmplsNotifEncapTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1 no-access
An entry (conceptual row) in the cienaCesGmplsNotifEncapTunnelTable. No Get, GetNext or Set is allowed on this table.
                             cienaCesGmplsNotifEncapTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.1 unsigned32 no-access
Tunnel index of the encap tunnel associated with the notification.
                             cienaCesGmplsNotifEncapTunnelType 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.2 integer no-access
Encap tunnel type of the encap tunnel associated with the notification. Enumeration: 'dynamic': 2, 'static': 1.
                             cienaCesGmplsNotifEncapTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.3 displaystring no-access
This represents the encap tunnel name.
                             cienaCesGmplsNotifEncapTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.4 cienaglobalstate no-access
Administrative state of the encap tunnel.
                             cienaCesGmplsNotifEncapTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.5 cienaglobalstate no-access
Operational state of the encap tunnel.
                             cienaCesGmplsNotifEncapTunnelAisFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.6 tunnelaisfault no-access
This is replaced by cienaCesGmplsNotifOamTunnelAisFaulted.
                             cienaCesGmplsNotifEncapTunnelFaultedNodeId 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.7 ipaddress no-access
IP address of the node with the AIS fault.
                             cienaCesGmplsNotifEncapTunnelFarEndLerId 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.8 ipaddress no-access
IP address of the far end LER for the tunne with the AIS fault.
                             cienaCesGmplsNotifEncapTunnelResult 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.9 integer no-access
specifies the result of encap tunnel auto sizing/MBB. Enumeration: 'fail': 2, 'success': 1.
                             cienaCesGmplsNotifEncapTunnelProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.10 integer no-access
specifies the protection role of the dynamic encap tunnel. Enumeration: 'none': 0, 'backup': 2, 'primary': 1.
                             cienaCesGmplsNotifEncapTunnelRequestedBw 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.11 unsigned32 no-access
specifies the requested bandwidth of the dynamic encap tunnel.
                             cienaCesGmplsNotifEncapTunnelOperationalBw 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.12 unsigned32 no-access
specifies the operational bandwidth of the dynamic encap tunnel.
                             cienaCesGmplsNotifEncapTunnelMbbParentApp 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.13 integer no-access
specifies the parent application using MBB of the dynamic encap tunnel. Enumeration: 'lspreoptimization': 3, 'none': 1, 'autosize': 2.
                             cienaCesGmplsNotifEncapTunnelOamFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.14 tunneloamfault no-access
Indication if the tunnel has Oam fault.
               cienaCesGmplsDecapTunnelNotif 1.3.6.1.4.1.1271.2.1.18.1.2.16
                     cienaCesGmplsNotifDecapTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.16.1 no-access
Table of notification objects required for decap tunnel notification.
                         cienaCesGmplsNotifDecapTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1 no-access
An entry (conceptual row) in the cienaCesGmplsNotifDecapTunnelTable. No Get, GetNext or Set is allowed on this table.
                             cienaCesGmplsNotifDecapTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.1 unsigned32 no-access
Tunnel index of the decap tunnel associated with the notification.
                             cienaCesGmplsNotifDecapTunnelType 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.2 integer no-access
Decap tunnel type of the decap tunnel associated with the notification. Enumeration: 'dynamic': 2, 'static': 1.
                             cienaCesGmplsNotifDecapTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.3 displaystring no-access
This represents the decap tunnel name.
                             cienaCesGmplsNotifDecapTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.4 cienaglobalstate no-access
Administrative state of the decap tunnel.
                             cienaCesGmplsNotifDecapTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.5 cienaglobalstate no-access
Operational state of the decap tunnel.
                             cienaCesGmplsNotifDecapTunnelAisFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.6 tunnelaisfault no-access
This is replaced by cienaCesGmplsNotifDecapTunnelOamFaulted.
                             cienaCesGmplsNotifDecapTunnelFaultedNodeId 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.7 ipaddress no-access
IP address of the node with the AIS fault.
                             cienaCesGmplsNotifDecapTunnelFarEndLerId 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.8 ipaddress no-access
IP address of the far end LER for the tunne with the AIS fault.
                             cienaCesGmplsNotifDecapTunnelOamFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.9 tunneloamfault no-access
Indication if the tunnel has Oam fault.
               cienaCesGmplsTransitTunnelNotif 1.3.6.1.4.1.1271.2.1.18.1.2.17
                     cienaCesGmplsNotifTransitTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.17.1 no-access
Table of notification objects required for transit tunnel notification.
                         cienaCesGmplsNotifTransitTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1 no-access
An entry (conceptual row) in the cienaCesGmplsNotifTransitTunnelTable. No Get, GetNext or Set is allowed on this table.
                             cienaCesGmplsNotifTransitTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.1 unsigned32 no-access
Tunnel index of the transit tunnel associated with the notification.
                             cienaCesGmplsNotifTransitTunnelType 1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.2 integer no-access
Transit tunnel type of the transit tunnel associated with the notification. Enumeration: 'dynamic': 2, 'static': 1.
                             cienaCesGmplsNotifTransitTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.3 displaystring no-access
This represents the transit tunnel name.
                             cienaCesGmplsNotifTransitTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.4 cienaglobalstate no-access
Administrative state of the transit tunnel.
                             cienaCesGmplsNotifTransitTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.5 cienaglobalstate no-access
Operational state of the transit tunnel.
                             cienaCesGmplsNotifTransitTunnelOamFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.6 tunneloamfault no-access
Indication if the tunnel has Oam fault.
               cienaCesGmplsAssociatedTunnelNotif 1.3.6.1.4.1.1271.2.1.18.1.2.18
                     cienaCesGmplsNotifAssociatedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.18.1 no-access
Table of notification objects required for associated tunnel notification.
                         cienaCesGmplsNotifAssociatedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1 no-access
An entry (conceptual row) in the cienaCesGmplsNotifAssociatedTunnelTable. No Get, GetNext or Set is allowed on this table.
                             cienaCesGmplsNotifAssociatedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.1 unsigned32 no-access
Tunnel index of the associated tunnel associated with the notification.
                             cienaCesGmplsNotifAssociatedTunnelType 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.2 integer no-access
Associated tunnel type of the associated tunnel associated with the notification. Enumeration: 'dynamic': 2, 'static': 1.
                             cienaCesGmplsNotifAssociatedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.3 displaystring no-access
This represents the associated tunnel name.
                             cienaCesGmplsNotifAssociatedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.4 cienaglobalstate no-access
Administrative state of the associated tunnel.
                             cienaCesGmplsNotifAssociatedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.5 cienaglobalstate no-access
Operational state of the associated tunnel.
                             cienaCesGmplsNotifAssociatedTunnelAisFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.6 tunnelaisfault no-access
Replaced by cienaCesGmplsNotifAssociatedTunnelOamFaulted
                             cienaCesGmplsNotifAssociatedTunnelFaultedNodeId 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.7 ipaddress no-access
IP address of the node with the AIS fault.
                             cienaCesGmplsNotifAssociatedTunnelFarEndLerId 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.8 ipaddress no-access
IP address of the far end LER for the tunne with the AIS fault.
                             cienaCesGmplsNotifAssociatedTunnelOamFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.9 tunneloamfault no-access
Indication if the tunnel has Oam fault.
               cienaCesGmplsEncapTunnelGrpNotif 1.3.6.1.4.1.1271.2.1.18.1.2.19
                     cienaCesGmplsNotifEncapTunnelGrpTable 1.3.6.1.4.1.1271.2.1.18.1.2.19.1 no-access
Table of notification objects required for encap tunnel group notification.
                         cienaCesGmplsNotifEncapTunnelGrpEntry 1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1 no-access
An entry (conceptual row) in the cienaCesGmplsNotifEncapTunnelGrpTable. No Get, GetNext or Set is allowed on this table.
                             cienaCesGmplsNotifEncapTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.1 unsigned32 no-access
Tunnel group index of the encap tunnel associated with the notification.
                             cienaCesGmplsNotifEncapTunnelGrpName 1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.2 displaystring no-access
Tunnel group name of the encap tunnel associated with the notification.
                             cienaCesGmplsNotifEncapTunnelGrpActiveEncapTunlIndex 1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.3 unsigned32 no-access
Active Encap Tunnel index of the tunnel group associated with the notification.
                             cienaCesGmplsNotifEncapTunnelGrpActiveEncapTunlName 1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.4 displaystring no-access
Active Encap Tunnel name of the Tunnel group associated with the notification.
                             cienaCesGmplsNotifEncapTunnelGrpActiveEncapTunlType 1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.5 integer no-access
Encap tunnel type of the encap tunnel associated with the notification. Enumeration: 'dynamic': 2, 'static': 1.
               cienaCesGmplsDecapTunnelGrpNotif 1.3.6.1.4.1.1271.2.1.18.1.2.20
                     cienaCesGmplsNotifDecapTunnelGrpTable 1.3.6.1.4.1.1271.2.1.18.1.2.20.1 no-access
Table of notification objects required for decap tunnel group notification.
                         cienaCesGmplsNotifDecapTunnelGrpEntry 1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1 no-access
An entry(conceptual row) in the cienaCesGmplsNotifDecapTunnelGrpTable. No Get, GetNext or Set is allowed on this table.
                             cienaCesGmplsNotifDecapTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.1 unsigned32 no-access
Tunnel group index of the decap tunnel associated with the notification.
                             cienaCesGmplsNotifDecapTunnelGrpName 1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.2 displaystring no-access
Tunnel group name of the decap tunnel associated with the notification.
                             cienaCesGmplsNotifDecapTunnelGrpActiveDecapTunlIndex 1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.3 unsigned32 no-access
Active Decap Tunnel index of the tunnel group associated with the notification.
                             cienaCesGmplsNotifDecapTunnelGrpActiveDecapTunlName 1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.4 displaystring no-access
Active Decap Tunnel name of the Tunnel group associated with the notification.
                             cienaCesGmplsNotifDecapTunnelGrpActiveDecapTunlType 1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.5 integer no-access
Decap tunnel type of the decap tunnel associated with the notification. Enumeration: 'dynamic': 2, 'static': 1.
               cienaCesGmplsTunnelAisFaultErrorNotif 1.3.6.1.4.1.1271.2.1.18.1.2.21
                     cienaCesGmplsNotifTunnelAisFaultErrorTable 1.3.6.1.4.1.1271.2.1.18.1.2.21.1 no-access
Table of notification objects required for tunnel Ais Fault error notification.
                         cienaCesGmplsNotifTunnelAisFaultErrorEntry 1.3.6.1.4.1.1271.2.1.18.1.2.21.1.1 no-access
An entry (conceptual row) in the cienaCesGmplsNotifTunnelAisFaultErrorTable No Get, GetNext or Set is allowed on this table.
                             cienaCesGmplsNotifTunnelDecapLabel 1.3.6.1.4.1.1271.2.1.18.1.2.21.1.1.1 unsigned32 no-access
Decap label associated with the notification.
                             cienaCesGmplsNotifTunnelErrorMsg 1.3.6.1.4.1.1271.2.1.18.1.2.21.1.1.2 displaystring no-access
This represents the fault error message for decap label associated with the notification
           cienaCesMplsGlobal 1.3.6.1.4.1.1271.2.1.18.1.3
               cienaCesMplsAttrs 1.3.6.1.4.1.1271.2.1.18.1.3.1
                   cienaCesMplsGlobalStaticAdminLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.3.1.1 unsigned32 read-only
The beginning of the static administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
                   cienaCesMplsGlobalStaticAdminLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.3.1.2 unsigned32 read-only
The end of the static administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
                   cienaCesMplsGlobalStaticOperLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.3.1.3 unsigned32 read-only
The beginning of the static operational label range. There cannot be any overlap between static and dynamic label ranges.
                   cienaCesMplsGlobalStaticOperLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.3.1.4 unsigned32 read-only
The end of the static operational label range. There cannot be any overlap between static and dynamic label ranges.
                   cienaCesMplsGlobalDynamicAdminLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.3.1.5 unsigned32 read-only
The beginning of the dynamic administrative label range. There cannot be any overlap between static and dynamic label ranges.
                   cienaCesMplsGlobalDynamicAdminLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.3.1.6 unsigned32 read-only
The end of the dynamic administrative label range. There cannot be any overlap between static and dynamic label ranges.
                   cienaCesMplsGlobalDynamicOperLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.3.1.7 unsigned32 read-only
The beginning of the dynamic operational label range. There cannot be any overlap between static and dynamic label ranges.
                   cienaCesMplsGlobalDynamicOperLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.3.1.8 unsigned32 read-only
The end of the dynamic operational label range. There cannot be any overlap between static and dynamic label ranges.
                   cienaCesMplsGlobalStaticAdminTunnelLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.3.1.9 unsigned32 read-only
The beginning of the static tunnel administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
                   cienaCesMplsGlobalStaticAdminTunnelLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.3.1.10 unsigned32 read-only
The end of the static tunnel administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
                   cienaCesMplsGlobalStaticOperTunnelLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.3.1.11 unsigned32 read-only
The beginning of the static tunnel operational label range. There cannot be any overlap between static and dynamic label ranges.
                   cienaCesMplsGlobalStaticOperTunnelLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.3.1.12 unsigned32 read-only
The end of the static tunnel operational label range. There cannot be any overlap between static and dynamic label ranges.
                   cienaCesMplsGlobalStaticAdminVcLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.3.1.13 unsigned32 read-only
The beginning of the static VC administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
                   cienaCesMplsGlobalStaticAdminVcLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.3.1.14 unsigned32 read-only
The end of the static VC administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
                   cienaCesMplsGlobalStaticOperVcLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.3.1.15 unsigned32 read-only
The beginning of the static VC operational label range. There cannot be any overlap between static and dynamic label ranges.
                   cienaCesMplsGlobalStaticOperVcLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.3.1.16 unsigned32 read-only
The end of the static VC operational label range. There cannot be any overlap between static and dynamic label ranges.
                   cienaCesMplsGlobalNextFreeStaticVcLabel 1.3.6.1.4.1.1271.2.1.18.1.3.1.17 unsigned32 read-only
The next free static VC label. There cannot be any overlap between static and dynamic label ranges.
               cienaCesMplsTunnelCosProfileTable 1.3.6.1.4.1.1271.2.1.18.1.3.2 no-access
Mpls cos-profile table.
                   cienaCesMplsTunnelCosProfileEntry 1.3.6.1.4.1.1271.2.1.18.1.3.2.1 no-access
Mpls cos-profile table entry.
                       cienaCesMplsTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.1 unsigned32 no-access
Unique index for Mpls tunnel Cos profile.
                       cienaCesMplsTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.2 displaystring read-only
Mpls tunnel Cos profile name
                       cienaCesMplsTunnelFrmCosPolicy 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.3 fcospolicy read-only
Frame CoS policy of the tunnel.
                       cienaCesMplsTunnelFrmCosMapId 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.4 integer read-only
The frame CoS map ID of tunnel. This value is valid if the frame CoS policy selected for the tunnel is rcos-mapped.
                       cienaCesMplsTunnelFrmCosMapName 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.5 displaystring read-only
Mpls tunnel frame cos Map name
                       cienaCesMplsTunnelFixedTC 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.6 unsigned32 read-only
If the frame CoS policy for the tunnel is fixed, this value is used for MPLS encapsulation.
                       cienaCesMplsTunnelRcosPolicy 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.7 rcospolicy read-only
Resolved CoS policy of the tunnel.
                       cienaCesMplsTunnelRcosMapName 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.8 displaystring read-only
Mpls tunnel resolved cos Map name. This object is valid only for 39XX and 51XX platforms
                       cienaCesMplsTunnelRCosMapId 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.9 integer read-only
The resolved CoS map ID of the tunnel. This value is valid if the resolved CoS policy selected for the tunnel is rcos-mapped. This object is valid only for 39XX and 51XX platforms
                       cienaCesMplsTunnelRcosProfileName 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.10 displaystring read-only
Mpls Tunnel resolved cos Profile name. This object is valid only for 87XX platforms
                       cienaCesMplsTunnelRCosProfileId 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.11 unsigned32 read-only
The resolved Cos profile ID of the Tunnel. This value is valid if the resolved Cos policy selected for the pseudowire is rcos-mapped. This object is valid only for 87XX platforms
               cienaCesMplsGlobalTunnelPath 1.3.6.1.4.1.1271.2.1.18.1.3.3
                   cienaCesMplsGlobalTunnelPathTable 1.3.6.1.4.1.1271.2.1.18.1.3.3.1 no-access
The (conceptual) table listing the MPLS tunnel paths. To create an entry in the tunnel path table, cienaCesMplsGlobalTunnelPathName and cienaCesMplsGlobalTunnelPathRowStatus must both be specified.
                       cienaCesMplsGlobalTunnelPathEntry 1.3.6.1.4.1.1271.2.1.18.1.3.3.1.1 no-access
An entry in the tunnel path table.
                           cienaCesMplsGlobalTunnelPathIndex 1.3.6.1.4.1.1271.2.1.18.1.3.3.1.1.1 unsigned32 no-access
A unique index in the path entry table.
                           cienaCesMplsGlobalTunnelPathName 1.3.6.1.4.1.1271.2.1.18.1.3.3.1.1.2 displaystring read-only
Name associated with the path.
                           cienaCesMplsGlobalTunnelPathUseCount 1.3.6.1.4.1.1271.2.1.18.1.3.3.1.1.3 counter32 read-only
Indicates the number of encap tunnels that are using this path.
                   cienaCesMplsGlobalTunnelPathHopTable 1.3.6.1.4.1.1271.2.1.18.1.3.3.2 no-access
The (conceptual) table listing the MPLS tunnel path hop. To create an entry in the path-hop table, cienaCesMplsGlobalTunnelPathHopIpAddr and cienaCesMplsGlobalTunnelPathHopRowStatus must both be specified.
                       cienaCesMplsGlobalTunnelPathHopEntry 1.3.6.1.4.1.1271.2.1.18.1.3.3.2.1 no-access
A tunnel hop entry.
                           cienaCesMplsGlobalTunnelPathHopIndex 1.3.6.1.4.1.1271.2.1.18.1.3.3.2.1.1 unsigned32 no-access
Unique index in the path hop table.
                           cienaCesMplsGlobalTunnelPathHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.3.3.2.1.2 ipaddress read-only
IP address associated with this hop. This object cannot be modified once the path hop is created.
                           cienaCesMplsGlobalTunnelPathHopType 1.3.6.1.4.1.1271.2.1.18.1.3.3.2.1.3 integer read-only
Indidcates the hop type of the path member. This object cannot be modified once the path hop is created. Enumeration: 'strict': 1, 'loose': 2.
               cienaCesMplsGlobalFreeStaticTunnelLabelTable 1.3.6.1.4.1.1271.2.1.18.1.3.4 no-access
Mpls Free static Tunnel Label table.
                   cienaCesMplsGlobalFreeStaticTunnelLabelEntry 1.3.6.1.4.1.1271.2.1.18.1.3.4.1 no-access
Mpls Free static Tunnel Label table.
                       cienaCesMplsGlobalFreeStaticTunnelLabelIndex 1.3.6.1.4.1.1271.2.1.18.1.3.4.1.1 unsigned32 no-access
Unique index for Mpls Free static Tunnel Label table.
                       cienaCesMplsGlobalFreeStaticTunnelLabel 1.3.6.1.4.1.1271.2.1.18.1.3.4.1.2 unsigned32 read-only
Mpls Free static Tunnel Label.
           cienaCesMplsPw 1.3.6.1.4.1.1271.2.1.18.1.4
               cienaCesMplsPwTable 1.3.6.1.4.1.1271.2.1.18.1.4.1 no-access
The (conceptual) table listing the MPLS pseudo wires.
                   cienaCesMplsPwEntry 1.3.6.1.4.1.1271.2.1.18.1.4.1.1 no-access
This represents an entry of the MPLS pseudowire table.
                       cienaCesMplsPwIndex 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.1 unsigned32 no-access
Unique index in the table.
                       cienaCesMplsPwSignallingType 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.2 integer read-only
Specifies Pw signalling type Enumeration: 'dynamic': 2, 'static': 1.
                       cienaCesMplsPwId 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.3 unsigned32 read-only
This represents the unique id that is signalled in LDP
                       cienaCesMplsPwName 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.4 displaystring read-only
This represents the pseudowire name
                       cienaCesMplsPwCustomerName 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.5 displaystring read-only
This represents the customer name
                       cienaCesMplsPwAdminState 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.6 cienaglobalstate read-only
This represents the pseudowire administrative status
                       cienaCesMplsPwOperState 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.7 cienaglobalstate read-only
This represents the pseudowire operational status
                       cienaCesMplsPwPeerIpAddr 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.8 ipaddress read-only
Peer Ip address of the pseudowire
                       cienaCesMplsPwInLabel 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.9 integer32 read-only
Indicates the inbound label of the pseudowire
                       cienaCesMplsPwOutLabel 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.10 integer32 read-only
Indicates the outbound label of the pseudowire
                       cienaCesMplsPwStatusTlv 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.11 integer read-only
This represents whether the pseudowire status tlv is turned on or off Enumeration: 'on': 1, 'off': 2.
                       cienaCesMplsPwRefreshStatusIntvl 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.12 unsigned32 read-only
This represents the refresh interval for status tlv. This is only applicable for static Pseudowire. For dynamic Pseudowire this is displayed as 0.
                       cienaCesMplsPwLocalFault 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.13 vcstatus read-only
This represents the pseudowire local fault
                       cienaCesMplsPwRemoteFault 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.14 vcstatus read-only
This represents the pseudowire remote fault
                       cienaCesMplsPwMtu 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.15 unsigned32 read-only
Indicates the pseudowire mtu
                       cienaCesMplsPwType 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.16 integer read-only
This represents the pseudowire type raw or tagged Enumeration: 'raw': 1, 'tagged': 2, 'tdm': 3.
                       cienaCesMplsPwMode 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.17 integer read-only
This represents the pseudowire mode whether it is mesh, spoke, or a MS-PW segment Enumeration: 'mesh': 1, 'spoke': 2, 'switching': 3.
                       cienaCesMplsPwCoSProfileName 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.18 displaystring read-only
This represents the cos profile name that is being used by pseudowire
                       cienaCesMplsPwCoSProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.19 unsigned32 read-only
This represents the index in cienaCesMplsPwCosProfile table
                       cienaCesMplsPwEgressL2PtTransform 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.20 cienaglobalstate read-only
This represents the pseudowire L2PT transform for classified L2 CFT control frames
                       cienaCesMplsPwVccVProfileName 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.21 displaystring read-only
This represents the vccv profile name that is being used by pseudowire
                       cienaCesMplsPwVccVProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.22 unsigned32 read-only
This represents the index in cienaCesMplsPwVccvProfile table
                       cienaCesMplsPwLocalCcCv 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.23 displaystring read-only
This represents the CC/CV configured on the local pseudowire
                       cienaCesMplsPwRemoteCcCv 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.24 displaystring read-only
This represents the CC/CV configured on the remote pseudowire
                       cienaCesMplsPwOperatingCcCv 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.25 displaystring read-only
This represents the negotiated/operating CC/CV
                       cienaCesMplsPwBlocking 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.26 integer read-only
Specifies whether pseudowire is blocking or forwarding Enumeration: 'yes': 1, 'no': 2.
                       cienaCesMplsPwVifIndex 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.27 unsigned32 read-only
This represents the Vif/tunnel group that is being used for the pseudowire
                       cienaCesMplsPwConfigTunnelName 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.28 displaystring read-only
This represents the configured transport tunnel name for the pseudowire
                       cienaCesMplsPwConfigTunnelType 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.29 tunneltype read-only
This represents the configured transport tunnel type for the pseudowire
                       cienaCesMplsPwConfigTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.30 unsigned32 read-only
Specifies the configured transport tunnel index in one of the cienaCesMplsTunnel/cienaCesGmplsTunnel tables for the pseudowire
                       cienaCesMplsPwActiveTunnelName 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.31 displaystring read-only
This represents the active transport tunnel name for the pseudowire
                       cienaCesMplsPwActiveTunnelType 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.32 tunneltype read-only
This represents the active transport tunnel type for the pseudo wire. This would be the same as configured tunnel type
                       cienaCesMplsPwActiveTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.33 unsigned32 read-only
Specifies the active transport tunnel index in one of the cienaCesMplsTunnel/cienaCesGmplsTunnel tables for the pseudowire
                       cienaCesMplsPwRole 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.34 integer read-only
This represents the pseudowire role whether it is a protecting or primary pseudowire Enumeration: 'stand-alone': 3, 'primary': 1, 'secondary': 2.
                       cienaCesMplsPwPrimaryPwName 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.35 displaystring read-only
This represents the primary pseudowire name if this is a secondary pseudowire
                       cienaCesMplsPwPrimaryPwIndex 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.36 unsigned32 read-only
This represents the primary pseudowire index in cienaCesMplsPw table if this is a secondary pseudowire
                       cienaCesMplsPwVsIndex 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.37 unsigned32 read-only
This represents the virtual switch index in the virtual switch MIB table
                       cienaCesServiceDelimiterVID 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.38 unsigned32 read-only
This represents the service delimiter VID. This object is valid only for 39XX and 51XX platforms
                       cienaCesServiceDelimiterTPID 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.39 unsigned32 read-only
This represents the service delimiter TPID. This object is valid only for 39XX and 51XX platforms
                       cienaCesMplsPwReversion 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.40 integer read-only
This represents whether the Pseudowire Reversion is turned on or off. With the Reversion turned on, when the Primary Pseudowire has recovered from earlier failure, it will be held down for a period of cienaCesMplsPwRevertTime(sec) before the switchover from the Backup Pseudowire to Primary Pseudowire takes place. With the Reversion turned off, the user must use manual switchover command to perform a switchover back to the Primary Pseudowire Enumeration: 'on': 1, 'off': 2.
                       cienaCesMplsPwRevertTime 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.41 unsigned32 read-only
This represents the Reversion Hold-time(in seconds) on the Primary Pseudowire. When the Primary Pseudowire has recovered from earlier failure, it will be held down for the length of this hold time. Once the time has elapsed, and if the Primary Pseudowire does not encountered any more failure, there will be a switchover from the Backup Pseudowire back to the Primary Pseudowire
                       cienaCesMplsPwProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.42 integer read-only
This represents the role of the pseudowire in a Protection bundle. Enumeration: 'primary-pseudowire': 1, 'stand-alone-pseudowire': 3, 'backup-pseudowire': 2.
                       cienaCesMplsPwProtectionState 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.43 integer read-only
This represents the pseudowire protection state. It only applies to those pseudowires in the protection bundle. For stand alone pseudowire this has no meaning and is reflected as n/a in this object Enumeration: 'standby': 3, 'man-swo-standby': 5, 'pw-reversion-pending': 6, 'not-applicable': 1, 'active': 2, 'pw-activation-pending': 7, 'man-swo-active': 4.
                       cienaCesMplsPwVsName 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.44 displaystring read-only
This represents the virtual switch name to which the pseudowire is attached.
                       cienaCesMplsPwStatusQuery 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.45 integer read-only
This represents whether the pseudowire status query is enabled. With the status query enabled, the pseudowire is able to query the remote status when it comes up and the remote status is unknown. Enumeration: 'on': 1, 'off': 2.
                       cienaCesMplsMsPwPeerPwName 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.46 displaystring read-only
This represents the peer pseudowire name if this is a MS-PW.
                       cienaCesMplsMsPwPeerPwIndex 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.47 unsigned32 read-only
This represents the peer pseudowire index if this is a MS-PW.
                       cienaCesMplsPwIdInRemoteFault 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.48 unsigned32 read-only
This represents the PW Id in the SP-PE TLV of the remote Status
                       cienaCesMplsLocalIpInRemoteFault 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.49 ipaddress read-only
Local Ip address in the SP-PE TLV of the remote Status
                       cienaCesMplsRemoteIpInRemoteFault 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.50 ipaddress read-only
Remote Ip address in the SP-PE TLV of the remote Status
                       cienaCesMplsPwFaultToNextHop 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.51 vcstatus read-only
This represents the aggregated MS-PW faults sent to the next hop
                       cienaCesMplsPwIdInFaultToNextHop 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.52 unsigned32 read-only
This represents the PW Id in the SP-PE TLV sent to the next hop
                       cienaCesMplsLocalIpInFaultToNextHop 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.53 ipaddress read-only
Local Ip address in the SP-PE TLV sent to the next hop
                       cienaCesMplsRemoteIpInFaultToNextHop 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.54 ipaddress read-only
Remote Ip address in the SP-PE TLV sent to the next hop
                       cienaCesMplsPwConfigBandwidth 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.55 mplsbitrate read-only
This represents the configured Bandwidth(in kbps) of pseudowire
                       cienaCesMplsPwOperBandwidth 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.56 mplsbitrate read-only
This represents the operational Bandwidth(in kbps) of pseudowire
                       cienaCesMplsPwBandwidthState 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.57 integer read-only
This represents the Bandwidth state of pseudowire Enumeration: 'none': 1, 'acquired': 5, 'configured': 2, 'rejected': 6, 'notRequired': 3, 'admitted': 4.
               cienaCesMplsPwCosProfileTable 1.3.6.1.4.1.1271.2.1.18.1.4.2 no-access
The (conceptual) table listing the MPLS pseudowire cos profiles.
                   cienaCesMplsPwCosProfileEntry 1.3.6.1.4.1.1271.2.1.18.1.4.2.1 no-access
This represents an entry of the MPLS pseudowire Cos profile table.
                       cienaCesMplsPwCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.1 unsigned32 no-access
Unique index for Mpls Pw Cos profile.
                       cienaCesMplsPwCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.2 displaystring read-only
Mpls pseudowire Cos profile name
                       cienaCesMplsPwCosProfileFrmCosPolicy 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.3 fcospolicy read-only
Frame CoS policy of the pseudowire
                       cienaCesMplsPwCosProfileFrmCosMapId 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.4 unsigned32 read-only
The frame CoS map ID of pseudo wire. This value is valid if the frame Cos policy selected for the pseudowire is rcos-mapped
                       cienaCesMplsPwCosProfileFrmCosMapName 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.5 displaystring read-only
Mpls pseudowire frame cos Map name
                       cienaCesMplsPwCosProfileFixedTC 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.6 unsigned32 read-only
If the frame CoS policy for the pseudowire is fixed, this value is used for MPLS encapsulation.
                       cienaCesMplsPwCosProfileRcosPolicy 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.7 rcospolicy read-only
Resolved CoS policy of the pseudowire
                       cienaCesMplsPwCosProfileRcosMapName 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.8 displaystring read-only
Mpls pseudowire resolved cos Map name. This object is valid only for 39XX and 51XX platforms
                       cienaCesMplsPwCosProfileRCosMapId 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.9 unsigned32 read-only
The resolved Cos map ID of the pseudo wire. This value is valid if the resolved Cos policy selected for the pseudowire is rcos-mapped. This object is valid only for 39XX and 51XX platforms
                       cienaCesMplsPwCosProfileRcosProfileName 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.10 displaystring read-only
Mpls pseudowire resolved cos Profile name. This object is valid only for 87XX
                       cienaCesMplsPwCosProfileRCosProfileId 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.11 integer read-only
The resolved Cos profile ID of the pseudo wire. This value is valid if the resolved Cos policy selected for the pseudowire is rcos-mapped. This object is valid only for 87XX
                       cienaCesMplsPwCosProfileRCosFixed 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.12 unsigned32 read-only
If the resolved CoS policy for the pseudowire is fixed, this value is used
               cienaCesMplsPwVccvProfileTable 1.3.6.1.4.1.1271.2.1.18.1.4.3 no-access
The (conceptual) table listing the MPLS pseudowire Vccv profiles.
                   cienaCesMplsPwVccvProfileEntry 1.3.6.1.4.1.1271.2.1.18.1.4.3.1 no-access
This represents an entry of the MPLS pseudowire Vccv profile table.
                       cienaCesMplsPwVccvProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.4.3.1.1 unsigned32 no-access
Unique index for Mpls Pw Vccv profile.
                       cienaCesMplsPwVccvProfileName 1.3.6.1.4.1.1271.2.1.18.1.4.3.1.2 displaystring read-only
Mpls pseudowire Vccv profile name
                       cienaCesMplsPwVccvProfileCcTtlExp 1.3.6.1.4.1.1271.2.1.18.1.4.3.1.3 integer read-only
This represents the pseudowire TTL-expiry VCCV control channel (CC Type-3) operation Enumeration: 'on': 1, 'off': 2.
                       cienaCesMplsPwVccvProfileCcCienaOob 1.3.6.1.4.1.1271.2.1.18.1.4.3.1.4 integer read-only
This represents the pseudowire CIENA proprietary out-of-band VCCV control channel (CC Type-4) operation Enumeration: 'on': 1, 'off': 2.
               cienaCesMplsPwNotif 1.3.6.1.4.1.1271.2.1.18.1.4.4
                   cienaCesMplsPwNotifTable 1.3.6.1.4.1.1271.2.1.18.1.4.4.1 no-access
Table of notification objects required for pseudowire notification.
                       cienaCesMplsPwNotifEntry 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1 no-access
An entry (conceptual row) in the cienaCesMplsPwNotifTable. No Get, GetNext or Set is allowed on this table.
                           cienaCesMplsPwNotifPwIndex 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.1 unsigned32 no-access
Unique pseudowire index in the PW table
                           cienaCesMplsPwNotifPwId 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.2 unsigned32 no-access
Unique Pseudowire ID used to identify the PW in the signaling. For the static PW this represents the locally configured value.
                           cienaCesMplsPwNotifPwName 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.3 displaystring no-access
This represents the locally configured PW name.
                           cienaCesMplsPwNotifPwPeerIpAddr 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.4 ipaddress no-access
This represents the IP address of the Peer on the remote end of the PW.
                           cienaCesMplsPwNotifPriPwId 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.5 unsigned32 no-access
This represents the PW Id of the primary PW.
                           cienaCesMplsPwNotifPriPwName 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.6 displaystring no-access
This represents the PW name of the primary PW.
                           cienaCesMplsPwNotifPriPwPeerIpAddr 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.7 ipaddress no-access
This represents the IP address of the Peer on the remote end of the primary PW.
                           cienaCesMplsPwNotifActPwIndex 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.8 unsigned32 no-access
Unique pseudowire index in the PW table
                           cienaCesMplsPwNotifActPwId 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.9 unsigned32 no-access
This represents the PW Id of the active PW.
                           cienaCesMplsPwNotifActPwName 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.10 displaystring no-access
This represents the PW name of the active PW.
                           cienaCesMplsPwNotifActPwPeerIpAddr 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.11 ipaddress no-access
This represents the IP address of the Peer on the remote end of the active PW.
               cienaCesMplsPWTrafficStatsTable 1.3.6.1.4.1.1271.2.1.18.1.4.5 no-access
Mpls PW Traffic Statistics table. The attributes in this table are supported only on specific platforms.
                   cienaCesMplsPWTrafficStatsEntry 1.3.6.1.4.1.1271.2.1.18.1.4.5.1 no-access
Mpls PW Traffic Statistics table entry.
                       cienaCesMplsPWTrafficStatsPWIndex 1.3.6.1.4.1.1271.2.1.18.1.4.5.1.1 unsigned32 no-access
Unique index for Mpls PW Traffic Statistics table.
                       cienaCesMplsPWTrafficStatsIncomingPackets 1.3.6.1.4.1.1271.2.1.18.1.4.5.1.2 unsigned32 read-only
The number of incoming packets for the given PW.
                       cienaCesMplsPWTrafficStatsOutgoingPackets 1.3.6.1.4.1.1271.2.1.18.1.4.5.1.3 unsigned32 read-only
The number of outgoing packets for the given PW.
                       cienaCesMplsPWTrafficStatsIncomingBytes 1.3.6.1.4.1.1271.2.1.18.1.4.5.1.4 unsigned32 read-only
The number of incoming bytes for the given PW.
                       cienaCesMplsPWTrafficStatsOutgoingBytes 1.3.6.1.4.1.1271.2.1.18.1.4.5.1.5 unsigned32 read-only
The number of outgoing bytes for the given PW.
           cienaCesMplsTe 1.3.6.1.4.1.1271.2.1.18.1.5
               cienaCesTeLinkTable 1.3.6.1.4.1.1271.2.1.18.1.5.1 no-access
This table captures the TE-link entries along with their respective attributes.
                   cienaCesTeLinkEntry 1.3.6.1.4.1.1271.2.1.18.1.5.1.1 no-access
This represents an entry for the TE-Link interface
                       cienaCesTeIfIndex 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.1 unsigned32 no-access
This represents the unique index for TE-Interface.
                       cienaCesTeInterfaceName 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.2 displaystring read-only
This represents the TE Interface name.
                       cienaCesTeLinkMetric 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.3 unsigned32 read-only
Link cost of the TE-Interface.
                       cienaCesTeResourceColorGroupIndex 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.4 unsigned32 read-only
Resource Color Group Index this TE-link is associated to.
                       cienaCesTeResourceColorBitMask 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.5 octet string read-only
This represents individual bit for Resource Color which will be set in Resource Color Group.
                       cienaCesMplsClassProfIndex 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.6 unsigned32 read-only
Class Profile Index this TE-link is associated to.
                       cienaCesTeLinkMode 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.7 temode read-only
TE mode of the TE-Interface.
                       cienaCesTeLinkSrlgCount 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.8 unsigned32 read-only
This identifies the total number of SRLGs configured on this TE link.
                       cienaCesTeLinkMaximumBandwidth 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.9 mplsbitrate read-only
Maximum TE-link Bandwidth(in kbps). This is same as the port bandwidth on which this TE-link is created
                       cienaCesTeLinkMaximumReservableBandwidth 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.10 mplsbitrate read-only
Maximum Reservable bandwidth(in kbps) on this TE-link.
                       cienaCesTeLinkTotalBandwidthPrio0 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.11 mplsbitrate read-only
Total Priority 0 Bandwidth(in kbps) allocated in this TE-link.
                       cienaCesTeLinkReservedBandwidthPrio0 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.12 mplsbitrate read-only
Reserved Priority 0 Bandwidth(in kbps) in this TE-link.
                       cienaCesTeLinkUnReservedBandwidthPrio0 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.13 mplsbitrate read-only
UnReserved Priority 0 Bandwidth(in kbps) in this TE-link.
                       cienaCesTeLinkTotalBandwidthPrio1 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.14 mplsbitrate read-only
Total Priority 1 Bandwidth(in kbps) allocated in this TE-link.
                       cienaCesTeLinkReservedBandwidthPrio1 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.15 mplsbitrate read-only
Reserved Priority 1 Bandwidth(in kbps) in this TE-link.
                       cienaCesTeLinkUnReservedBandwidthPrio1 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.16 mplsbitrate read-only
UnReserved Priority 1 Bandwidth(in kbps) in this TE-link.
                       cienaCesTeLinkTotalBandwidthPrio2 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.17 mplsbitrate read-only
Total Priority 2 Bandwidth(in kbps) allocated in this TE-link.
                       cienaCesTeLinkReservedBandwidthPrio2 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.18 mplsbitrate read-only
Reserved Priority 2 Bandwidth(in kbps) in this TE-link.
                       cienaCesTeLinkUnReservedBandwidthPrio2 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.19 mplsbitrate read-only
UnReserved Priority 2 Bandwidth(in kbps) in this TE-link.
                       cienaCesTeLinkTotalBandwidthPrio3 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.20 mplsbitrate read-only
Total Priority 3 Bandwidth(in kbps) allocated in this TE-link.
                       cienaCesTeLinkReservedBandwidthPrio3 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.21 mplsbitrate read-only
Reserved Priority 3 Bandwidth(in kbps) in this TE-link.
                       cienaCesTeLinkUnReservedBandwidthPrio3 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.22 mplsbitrate read-only
UnReserved Priority 3 Bandwidth(in kbps) in this TE-link.
                       cienaCesTeLinkTotalBandwidthPrio4 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.23 mplsbitrate read-only
Total Priority 4 Bandwidth(in kbps) allocated in this TE-link.
                       cienaCesTeLinkReservedBandwidthPrio4 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.24 mplsbitrate read-only
Reserved Priority 4 Bandwidth(in kbps) in this TE-link.
                       cienaCesTeLinkUnReservedBandwidthPrio4 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.25 mplsbitrate read-only
UnReserved Priority 4 Bandwidth(in kbps) in this TE-link.
                       cienaCesTeLinkTotalBandwidthPrio5 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.26 mplsbitrate read-only
Total Priority 5 Bandwidth(in kbps) allocated in this TE-link.
                       cienaCesTeLinkReservedBandwidthPrio5 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.27 mplsbitrate read-only
Reserved Priority 5 Bandwidth(in kbps) in this TE-link.
                       cienaCesTeLinkUnReservedBandwidthPrio5 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.28 mplsbitrate read-only
UnReserved Priority 5 Bandwidth(in kbps) in this TE-link.
                       cienaCesTeLinkTotalBandwidthPrio6 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.29 mplsbitrate read-only
Total Priority 6 Bandwidth(in kbps) allocated in this TE-link.
                       cienaCesTeLinkReservedBandwidthPrio6 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.30 mplsbitrate read-only
Reserved Priority 6 Bandwidth(in kbps) in this TE-link.
                       cienaCesTeLinkUnReservedBandwidthPrio6 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.31 mplsbitrate read-only
UnReserved Priority 6 Bandwidth(in kbps) in this TE-link.
                       cienaCesTeLinkTotalBandwidthPrio7 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.32 mplsbitrate read-only
Total Priority 7 Bandwidth(in kbps) allocated in this TE-link.
                       cienaCesTeLinkReservedBandwidthPrio7 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.33 mplsbitrate read-only
Reserved Priority 7 Bandwidth(in kbps) in this TE-link.
                       cienaCesTeLinkUnReservedBandwidthPrio7 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.34 mplsbitrate read-only
UnReserved Priority 7 Bandwidth(in kbps) in this TE-link.
               cienaCesTeResourceGrpTable 1.3.6.1.4.1.1271.2.1.18.1.5.2 no-access
This table captures the Resource Color Group Template entries.
                   cienaCesTeResGrpEntry 1.3.6.1.4.1.1271.2.1.18.1.5.2.1 no-access
An entry in this table exists for each of the Resource color group template.
                       cienaCesTeResourceColorGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.5.2.1.1 unsigned32 no-access
This represents the unique index for Resource Color Group entry. Index 0 is used to get the colors which are not associated to any color group cienaCesTeResourceColorsTable
                       cienaCesTeResourceGrpName 1.3.6.1.4.1.1271.2.1.18.1.5.2.1.2 displaystring read-only
This represents the name of the Resource Color Group.
                       cienaCesTeResourceColorGroupBitMask 1.3.6.1.4.1.1271.2.1.18.1.5.2.1.3 octet string read-only
This represents the bitmask value for colors added to this Resource Color Group.
                       cienaCesTeResourceColorGroupUseCount 1.3.6.1.4.1.1271.2.1.18.1.5.2.1.4 counter32 read-only
Indicates the number of Tunnels using this MPLS Resource Color Group.
               cienaCesTeResourceColorsTable 1.3.6.1.4.1.1271.2.1.18.1.5.3 no-access
This table captures the Resource Colors entries. These colors can be associated to any Resource Color Group
                   cienaCesTeResColorEntry 1.3.6.1.4.1.1271.2.1.18.1.5.3.1 no-access
An entry in this table exists for each of the Resource colors configured along with its associated Resource Group.
                       cienaCesTeResourceColorIndex 1.3.6.1.4.1.1271.2.1.18.1.5.3.1.1 unsigned32 no-access
This represents the unique index for Resource Color entry.
                       cienaCesTeResourceColorName 1.3.6.1.4.1.1271.2.1.18.1.5.3.1.2 displaystring read-only
This represents the name of the Resource Color.
                       cienaCesTeResourceColorBit 1.3.6.1.4.1.1271.2.1.18.1.5.3.1.3 octet string read-only
This represents individual bit for Resource Color which will be set in Resource Color Group's cienaCesTeResourceColorGroupBitMask.
                       cienaCesTeResourceColorUseCount 1.3.6.1.4.1.1271.2.1.18.1.5.3.1.4 counter32 read-only
Indicates the number of MPLS Resource Groups using this Resource Color.
               cienaCesTeLinkSrlgTable 1.3.6.1.4.1.1271.2.1.18.1.5.4 no-access
This table specifies the SRLGs associated with TE links.
                   cienaCesTeLinkSrlgEntry 1.3.6.1.4.1.1271.2.1.18.1.5.4.1 no-access
An entry in this table contains information about an SRLG associated with a TE link. An ifEntry in the ifTable must exist before a teLinkSrlgEntry using the same ifIndex is created. The ifType of ifEntry must be teLink(200). If a TE link entry in the ifTable is destroyed, then so are all of the entries in the teLinkSrlgTable that use the ifIndex of this TE link.
                       cienaCesTeLinkSrlg 1.3.6.1.4.1.1271.2.1.18.1.5.4.1.1 unsigned32 no-access
This identifies an SRLG supported by the TE link. An SRLG is identified with a 32-bit number that is unique within an IGP domain. Zero is a valid SRLG number.
                       cienaCesTeLinkSrlgStatus 1.3.6.1.4.1.1271.2.1.18.1.5.4.1.2 srlgstate read-only
This variable represents the SRLG value status. Currently we support only active(1) indicating SRLG is configured.
 cienaCesMplsMIBNotificationPrefix 1.3.6.1.4.1.1271.2.2.17
       cienaCesMplsMIBNotifications 1.3.6.1.4.1.1271.2.2.17.0
           cienaCesMplsTunnelOperStateChgTrap 1.3.6.1.4.1.1271.2.2.17.0.1
This notification is sent when the operational state of an encap tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesMplsNotifEncapTunnelIndex, cienaCesMplsNotifEncapTunnelType, cienaCesMplsNotifEncapTunnelName, cienaCesMplsNotifEncapTunnelAdminState, cienaCesMplsNotifEncapTunnelOperState, cienaCesMplsNotifEncapTunnelOamFaulted, cienaCesMplsNotifEncapTunnelFaultNodeId.
           cienaCesMplsEncapTunnelGrpActiveEncapTunnelChange 1.3.6.1.4.1.1271.2.2.17.0.2
This notification is sent whenever the active encap tunnel in a tunnel group changes.
           cienaCesMplsTransitTunnelOperStateChgTrap 1.3.6.1.4.1.1271.2.2.17.0.3
This notification is sent when the operational state of a transit tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesMplsNotifTransitTunnelIndex, cienaCesMplsNotifTransitTunnelType, cienaCesMplsNotifTransitTunnelName, cienaCesMplsNotifTransitTunnelAdminState, cienaCesMplsNotifTransitTunnelOperState, cienaCesMplsNotifTransitTunnelOamFaulted.
           cienaCesMplsAssociatedTunnelOperStateChgTrap 1.3.6.1.4.1.1271.2.2.17.0.6
This notification is sent when the operational state of an associated tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesMplsNotifAssociatedTunnelIndex, cienaCesMplsNotifAssociatedTunnelType, cienaCesMplsNotifAssociatedTunnelName, cienaCesMplsNotifAssociatedTunnelAdminState, cienaCesMplsNotifAssociatedTunnelOperState, cienaCesMplsNotifAssociatedTunnelOamFaulted, cienaCesMplsNotifAssociatedTunnelFaultedNodeId.
           cienaCesMplsCacInterfaceThresholdTrap 1.3.6.1.4.1.1271.2.2.17.0.7
This notification is sent when LSP bandwith usage exceeds the threshold. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesMplsNotifCasInterfaceIndex, cienaCesMplsNotifCacInterfaceClassType, cienaCesMplsNotifCacInterfaceName, cienaCesMplsNotifCacInterfaceThreshold.
       cienaCesGmplsMIBNotifications 1.3.6.1.4.1.1271.2.2.17.1
           cienaCesGmplsEncapUnidirTunnelOperStateChgTrap 1.3.6.1.4.1.1271.2.2.17.1.1
This notification is sent when the operational state of an encap uni-direction tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifEncapTunnelIndex, cienaCesGmplsNotifEncapTunnelType, cienaCesGmplsNotifEncapTunnelName, cienaCesGmplsNotifEncapTunnelAdminState, cienaCesGmplsNotifEncapTunnelOperState, cienaCesGmplsNotifEncapTunnelOamFaulted, cienaCesGmplsNotifEncapTunnelFaultedNodeId.
           cienaCesGmplsEncapCoroutedTunnelOperStateChgTrap 1.3.6.1.4.1.1271.2.2.17.1.2
This notification is sent when the operational state of an encap corouted tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifEncapTunnelIndex, cienaCesGmplsNotifEncapTunnelType, cienaCesGmplsNotifEncapTunnelName, cienaCesGmplsNotifEncapTunnelAdminState, cienaCesGmplsNotifEncapTunnelOperState, cienaCesGmplsNotifEncapTunnelOamFaulted, cienaCesGmplsNotifEncapTunnelFaultedNodeId.
           cienaCesGmplsDecapCoroutedTunnelOperStateChgTrap 1.3.6.1.4.1.1271.2.2.17.1.3
This notification is sent when the operational state of an decap corouted tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifDecapTunnelIndex, cienaCesGmplsNotifDecapTunnelType, cienaCesGmplsNotifDecapTunnelName, cienaCesGmplsNotifDecapTunnelAdminState, cienaCesGmplsNotifDecapTunnelOperState, cienaCesGmplsNotifDecapTunnelOamFaulted, cienaCesGmplsNotifDecapTunnelFaultedNodeId.
           cienaCesGmplsTransitUnidirTunnelOperStateChgTrap 1.3.6.1.4.1.1271.2.2.17.1.4
This notification is sent when the operational state of a transit uni-direcition tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifTransitTunnelIndex, cienaCesGmplsNotifTransitTunnelType, cienaCesGmplsNotifTransitTunnelName, cienaCesGmplsNotifTransitTunnelAdminState, cienaCesGmplsNotifTransitTunnelOperState, cienaCesGmplsNotifTransitTunnelOamFaulted.
           cienaCesGmplsTransitCoroutedTunnelOperStateChgTrap 1.3.6.1.4.1.1271.2.2.17.1.5
This notification is sent when the operational state of a transit corouted tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifTransitTunnelIndex, cienaCesGmplsNotifTransitTunnelType, cienaCesGmplsNotifTransitTunnelName, cienaCesGmplsNotifTransitTunnelAdminState, cienaCesGmplsNotifTransitTunnelOperState, cienaCesGmplsNotifTransitTunnelOamFaulted.
           cienaCesGmplsEncapUnidirTunnelGrpActiveEncapTunnelChangeTrap 1.3.6.1.4.1.1271.2.2.17.1.6
This notification is sent whenever the active encap tunnel in an encap uni-direction tunnel group changes.
           cienaCesGmplsEncapCoroutedTunnelGrpActiveEncapTunnelChangeTrap 1.3.6.1.4.1.1271.2.2.17.1.7
This notification is sent whenever the active encap tunnel in an encap corouted tunnel group changes.
           cienaCesGmplsDecapCoroutedTunnelGrpActiveDecapTunnelChangeTrap 1.3.6.1.4.1.1271.2.2.17.1.8
This notification is sent whenever the active decap tunnel in a decap corouted tunnel group changes.
           cienaCesGmplsAssociatedTunnelOperStateChgTrap 1.3.6.1.4.1.1271.2.2.17.1.9
This notification is sent when the operational state of an encap tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifAssociatedTunnelIndex, cienaCesGmplsNotifAssociatedTunnelType, cienaCesGmplsNotifAssociatedTunnelName, cienaCesGmplsNotifAssociatedTunnelAdminState, cienaCesGmplsNotifAssociatedTunnelOperState, cienaCesGmplsNotifAssociatedTunnelOamFaulted, cienaCesGmplsNotifAssociatedTunnelFaultedNodeId.
           cienaCesGmplsEncapCoroutedTunnelAisFaultStateChgTrap 1.3.6.1.4.1.1271.2.2.17.1.10
This notification is obsoleted, its functionality is absorbed in the OperState Change notification.
           cienaCesGmplsDecapCoroutedTunnelAisFaultStateChgTrap 1.3.6.1.4.1.1271.2.2.17.1.11
This notification is obsoleted, its functionality is absorbed in the OperState Change notification.
           cienaCesGmplsAssociatedTunnelAisFaultStateChgTrap 1.3.6.1.4.1.1271.2.2.17.1.12
This notification is obsoleted, its functionality is absorbed in the OperState Change notification.
           cienaCesGmplsTunnelAisFaultErrorTrap 1.3.6.1.4.1.1271.2.2.17.1.13
This notification is sent when there is a fault sent for a LSP whose label is not associated with any tunnel. This will happen whenever the AIS admin state is disabled for the bidirectional tunnel. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifTunnelDecapLabel, and cienaCesGmplsNotifTunnelErrorMsg
           cienaCesGmplsEncapTunnelResizeResultTrap 1.3.6.1.4.1.1271.2.2.17.1.14
This notification is sent when the encap tunnel auto size is done Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifEncapTunnelIndex, cienaCesGmplsNotifEncapTunnelType, cienaCesGmplsNotifEncapTunnelName, cienaCesGmplsNotifEncapTunnelResult, cienaCesGmplsNotifEncapTunnelProtectionRole, cienaCesGmplsNotifEncapTunnelRequestdBw and cienaCesGmplsNotifEncapTunnelOperationalBw.
           cienaCesGmplsEncapTunnelMbbResultTrap 1.3.6.1.4.1.1271.2.2.17.1.15
This notification is sent when the encap tunnel MBB done Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifEncapTunnelIndex, cienaCesGmplsNotifEncapTunnelType, cienaCesGmplsNotifEncapTunnelName, cienaCesGmplsNotifEncapTunnelResult, cienaCesGmplsNotifEncapTunnelProtectionRole, cienaCesGmplsNotifEncapTunnelRequestdBw and cienaCesGmplsNotifEncapTunnelOperationalBw, cienaCesGmplsNotifEncapTunnelMbbParentApp.
       cienaCesMplsPwMIBNotifications 1.3.6.1.4.1.1271.2.2.17.2
           cienaCesMplsPwDown 1.3.6.1.4.1.1271.2.2.17.2.1
This notification is sent when the operational state of a pseudowire has changed from up to down.
           cienaCesMplsPwUp 1.3.6.1.4.1.1271.2.2.17.2.2
This notification is sent when the operational state of a pseudowire has changed from down to up.
           cienaCesMplsPwBundleActivePwChange 1.3.6.1.4.1.1271.2.2.17.2.3
This notification is sent when the active member of the pseudowire bundle has changed.