CDM-570L: View SNMP OID List / Download MIB
VENDOR: COMTECH EFDATA CORPORATION
Home | MIB: CDM-570L | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
cdm570 | 1.3.6.1.4.1.6247.24 |
Module Identity for both CDM-570 L-Band and IF-Band Satellite Modems. |
||
cdm570LBUCOption | 1.3.6.1.4.1.6247.24.1.1.2.7 | integer | read-only |
BUC option, where: 0 = None 1 = 100 watt 2 = 150 watt Enumeration: 'none': 0, 'buc100watt': 1, 'buc150watt': 2. |
cdm570LAlarmMaskBUC | 1.3.6.1.4.1.6247.24.1.2.7.9 | integer | read-write |
BUC alarm mask, where: 0 = Unmasked 1 = Masked Enumeration: 'unmasked': 0, 'masked': 1. |
cdm570LAlarmMaskLNB | 1.3.6.1.4.1.6247.24.1.2.7.10 | integer | read-write |
LNB alarm mask, where: 0 = Unmasked 1 = Masked Enumeration: 'unmasked': 0, 'masked': 1. |
cdm570LBUC | 1.3.6.1.4.1.6247.24.1.2.8.1 | |||
cdm570LBUCDCPower | 1.3.6.1.4.1.6247.24.1.2.8.1.1 | integer | read-write |
BUC power control, where: 0 = Disable BUC DC Power 1 = Enable BUC DC Power Enumeration: 'enable': 1, 'disable': 0. |
cdm570LBUCFSK | 1.3.6.1.4.1.6247.24.1.2.8.1.2 | |||
cdm570LBUCComms | 1.3.6.1.4.1.6247.24.1.2.8.1.2.1 | integer | read-write |
Enables or disables communication, via the FSK link, with an externally connected Block Up Converted (BUC), where: 0 = Disabled 1 = Enabled Enumeration: 'disabled': 0, 'enabled': 1. |
cdm570LBUCAddress | 1.3.6.1.4.1.6247.24.1.2.8.1.2.2 | integer | read-write |
Indicates the BUC address, between 1 and 15. |
cdm570LBUCRFOutput | 1.3.6.1.4.1.6247.24.1.2.8.1.2.3 | integer | read-write |
Indicates BUC output enable, where: 0 = Off (output disabled) 1 = On (output enabled) Enumeration: 'on': 1, 'off': 0. |
cdm570LBUC10MHzReference | 1.3.6.1.4.1.6247.24.1.2.8.1.3 | integer | read-write |
Enables or disables the 10 MHz frequency reference to the BUC, where: 0 = Disabled 1 = Enabled Enumeration: 'disabled': 0, 'enabled': 1. |
cdm570LBUCAlarm | 1.3.6.1.4.1.6247.24.1.2.8.1.4 | |||
cdm570LBUCHighCurrentLimit | 1.3.6.1.4.1.6247.24.1.2.8.1.4.1 | integer | read-write |
BUC high current limit, between 500 and 4000 mA. |
cdm570LBUCLowCurrentLimit | 1.3.6.1.4.1.6247.24.1.2.8.1.4.2 | integer | read-write |
BUC low current limit, between 0 and 3000 mA. BUC low current limit must not exceed BUC high current limit. |
cdm570LBUCLO | 1.3.6.1.4.1.6247.24.1.2.8.1.5 | |||
cdm570LBUCLOFrequency | 1.3.6.1.4.1.6247.24.1.2.8.1.5.1 | integer | read-write |
BUC transmit LO frequency in the range of 3000 to 65000 MHz. Setting 0 disables this feature. Terminal Frequency = BUC_LO +/- Tx_Frequency (depending on LO mix). |
cdm570LBUCLOMix | 1.3.6.1.4.1.6247.24.1.2.8.1.5.2 | integer | read-write |
BUC LO frequency mix, where: 0 = Low-side mix 1 = High-side mix Enumeration: 'lowSideMix': 0, 'highSideMix': 1. |
cdm570LLNB | 1.3.6.1.4.1.6247.24.1.2.8.2 | |||
cdm570LLNBDCPower | 1.3.6.1.4.1.6247.24.1.2.8.2.1 | integer | read-write |
LNB power control, where: 0 = Off 1 = On, 13V LNB voltage 2 = On, 18V LNB voltage 3 = On, 24V LNB voltage Enumeration: 'on13volts': 1, 'off': 0, 'on18volts': 2, 'on24volts': 3. |
cdm570LLNB10MHzReference | 1.3.6.1.4.1.6247.24.1.2.8.2.2 | integer | read-write |
LNB 10MHz frequency reference, where: 0 = Disable LNB 10MHz reference 1 = Enable LNB 10MHz reference Enumeration: 'enable': 1, 'disable': 0. |
cdm570LLNBAlarm | 1.3.6.1.4.1.6247.24.1.2.8.2.3 | |||
cdm570LLNBHighCurrentLimit | 1.3.6.1.4.1.6247.24.1.2.8.2.3.1 | integer | read-write |
LNB upper alarm limit for current, between 50 and 600 mA. |
cdm570LLNBLowCurrentLimit | 1.3.6.1.4.1.6247.24.1.2.8.2.3.2 | integer | read-write |
LNB lower alarm limit for current, between 10 and 400 mA. |
cdm570LLNBLO | 1.3.6.1.4.1.6247.24.1.2.8.2.4 | |||
cdm570LLNBLOFrequency | 1.3.6.1.4.1.6247.24.1.2.8.2.4.1 | integer | read-write |
LNB receieve LO frequency, in the range of 3000 to 65000 MHz. Setting a 0 disables the feature. Terminal Frequency = LNB_LO +/- Rx_Frequency (depending on High/Low Mix) |
cdm570LLNBLOMix | 1.3.6.1.4.1.6247.24.1.2.8.2.4.2 | integer | read-write |
LO frequency mix, where: 0 = Low-side mix 1 = High-side mix Enumeration: 'lowSideMix': 0, 'highSideMix': 1. |
cdm570LODUAlarms | 1.3.6.1.4.1.6247.24.1.3.1.4 | integer | read-only |
ODU Faults Value Description of status parameter 0 No ODU faults 1 BUC PLL 3 BUC current 5 BUC voltage 7 LNB current 9 LNB voltage 11 BUC temperature 13 BUC checksum Enumeration: 'bucChecksum': 13, 'noODUfaults': 0, 'bucCurrent': 3, 'bucPLL': 1, 'lnbCurrent': 7, 'bucTemperature': 11, 'bucVoltage': 5, 'lnbVoltage': 9. |
cdm570LBUCParams | 1.3.6.1.4.1.6247.24.1.3.6.1 | |||
cdm570LBUCCurrent | 1.3.6.1.4.1.6247.24.1.3.6.1.1 | integer | read-only |
Indicates the value of the BUC current, between 0 and 9999 mA. Units = mA. |
cdm570LBUCVoltage | 1.3.6.1.4.1.6247.24.1.3.6.1.2 | integer | read-only |
Indicates the value ofthe BUC voltage, between 0 and 64 volts in 0.1 volts. Units = 0.1 volts. |
cdm570LBUCTemperature | 1.3.6.1.4.1.6247.24.1.3.6.1.3 | integer | read-only |
Indicates the BUC temperature in degrees Celsius. If not available, response is -99. Note: This query is only valid when FSK and BUC power are turned On. |
cdm570LBUCSoftwareVersion | 1.3.6.1.4.1.6247.24.1.3.6.1.4 | integer | read-only |
Indicates the BUC software version, between 1 and 15. If not available, response is 0. |
cdm570LBUCPLLAlarm | 1.3.6.1.4.1.6247.24.1.3.6.1.5 | integer | read-only |
BUC PLL lock state, where: 0 = Locked 1 = Unlocked 9 = Unavailable Enumeration: 'locked': 0, 'unavailable': 9, 'unlocked': 1. |
cdm570LBUCPowerLevel | 1.3.6.1.4.1.6247.24.1.3.6.1.6 | integer | read-only |
BUC output power level in 0.1 watts. Units = 0.1 watts. Returns 0 when FSK and BUC power are not enabled. |
cdm570LBUCTerminalTxFrequency | 1.3.6.1.4.1.6247.24.1.3.6.1.7 | integer | read-only |
Terminal Tx Frequency = BUC_LO +/- Tx_Frequency (depending on LO mix) Units = 100 Hz Resolution = 100 Hz Returns 0 if BUC LO is zero. |
cdm570LLNBParams | 1.3.6.1.4.1.6247.24.1.3.6.2 | |||
cdm570LLNBCurrent | 1.3.6.1.4.1.6247.24.1.3.6.2.1 | integer | read-only |
Indicates the value of the LNB current, between 0 and 999 mA. |
cdm570LLNBVoltage | 1.3.6.1.4.1.6247.24.1.3.6.2.2 | integer | read-only |
Indicates the value of the LNB voltage, between 0 and 30 volts. Units = 0.1 volts If not available, response is 0. |
cdm570LLNBTerminalRxFrequency | 1.3.6.1.4.1.6247.24.1.3.6.2.3 | integer | read-only |
Terminal Rx frequency = LNB LO +/- Rx_Frequency (depending on LO mix) Units = 100 Hz Resolution = 100 Hz Returns 0 if LNB_LO is zero. |
cdm570Notifications | 1.3.6.1.4.1.6247.24.2 | |||
cdm570NotificationsPrefix | 1.3.6.1.4.1.6247.24.2.0 | |||
cdm570LODUAlarm | 1.3.6.1.4.1.6247.24.2.0.4 |
CDM-570L BUC and LNB ODU Alarm Trap |
||
cdm570LGroups | 1.3.6.1.4.1.6247.24.3.3 | |||
cdm570LObjectsGroup | 1.3.6.1.4.1.6247.24.3.3.1 |
CDM-570L Objects Group. |
||
cdm570LNotificationsGroup | 1.3.6.1.4.1.6247.24.3.3.2 |
CDM-570L Notifications Group. |
||
cdm570LCompliances | 1.3.6.1.4.1.6247.24.3.4 | |||
cdm570LCompliance | 1.3.6.1.4.1.6247.24.3.4.1 |
CDM-570L Compliance. |