AT-ENVMONv2-MIB: View SNMP OID List / Download MIB

VENDOR: ALLIED TELESIS


 Home MIB: AT-ENVMONv2-MIB
Download as:   
SNMPv2-CONF, AT-SYSINFO-MIB, SNMPv2-SMI, AT-SMI-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 atEnvMonv2 1.3.6.1.4.1.207.8.4.4.3.12
The AT Environment Monitoring v2 MIB for managing and reporting data relating to voltage rails, fan speeds, temperature sensors and power supply units.
       atEnvMonv2Notifications 1.3.6.1.4.1.207.8.4.4.3.12.0
           atEnvMonv2FanAlarmSetNotify 1.3.6.1.4.1.207.8.4.4.3.12.0.1
A notification generated when the monitored speed of a fan drops below its lower threshold.
           atEnvMonv2FanAlarmClearedNotify 1.3.6.1.4.1.207.8.4.4.3.12.0.2
A notification generated when the monitored speed of a fan returns to an acceptable value, the fan having previously been in an alarm condition.
           atEnvMonv2VoltAlarmSetNotify 1.3.6.1.4.1.207.8.4.4.3.12.0.3
A notification generated when the voltage of a monitored voltage rail goes out of tolerance, either by dropping below its lower threshold, or exceeding its upper threshold.
           atEnvMonv2VoltAlarmClearedNotify 1.3.6.1.4.1.207.8.4.4.3.12.0.4
A notification generated when the voltage of a monitored voltage rail returns to an acceptable value, having previously been in an alarm condition.
           atEnvMonv2TempAlarmSetNotify 1.3.6.1.4.1.207.8.4.4.3.12.0.5
A notification generated when a monitored temperature exceeds its upper threshold.
           atEnvMonv2TempAlarmClearedNotify 1.3.6.1.4.1.207.8.4.4.3.12.0.6
A notification generated when a monitored temperature returns to an acceptable value, having previously been in an alarm condition.
           atEnvMonv2PsbAlarmSetNotify 1.3.6.1.4.1.207.8.4.4.3.12.0.7
A notification generated when a monitored parameter of a power supply bay device goes out of tolerance.
           atEnvMonv2PsbAlarmClearedNotify 1.3.6.1.4.1.207.8.4.4.3.12.0.8
A notification generated when a monitored parameter of a power supply bay device returns to an acceptable value, having previously been in an alarm condition.
       atEnvMonv2FanTable 1.3.6.1.4.1.207.8.4.4.3.12.1 no-access
A table of information about fans installed in the device that have their fan speeds monitored by environment monitoring hardware.
           atEnvMonv2FanEntry 1.3.6.1.4.1.207.8.4.4.3.12.1.1 no-access
The description, current speed, lower threshold speed and current status of a fan.
               atEnvMonv2FanStackMemberId 1.3.6.1.4.1.207.8.4.4.3.12.1.1.1 unsigned32 read-only
The index of the stack member hosting this fan. For a chassis switch, it corresponds to the card ID of the active controller.
               atEnvMonv2FanBoardIndex 1.3.6.1.4.1.207.8.4.4.3.12.1.1.2 unsigned32 read-only
The index of the board hosting this fan in the board table.
               atEnvMonv2FanIndex 1.3.6.1.4.1.207.8.4.4.3.12.1.1.3 unsigned32 read-only
The numeric identifier of this fan on its host board.
               atEnvMonv2FanDescription 1.3.6.1.4.1.207.8.4.4.3.12.1.1.4 displaystringunsized read-only
The description of this fan.
               atEnvMonv2FanCurrentSpeed 1.3.6.1.4.1.207.8.4.4.3.12.1.1.5 unsigned32 read-only
The current speed of this fan in revolutions per minute.
               atEnvMonv2FanLowerThreshold 1.3.6.1.4.1.207.8.4.4.3.12.1.1.6 unsigned32 read-only
The minimum acceptable speed of the fan in revolutions per minute.
               atEnvMonv2FanStatus 1.3.6.1.4.1.207.8.4.4.3.12.1.1.7 integer read-only
An indication of whether this fan is currently in an alarm condition. A value of 'failed' indicates that its current speed is too low, 'good' indicates that the current speed is acceptable. Enumeration: 'failed': 1, 'good': 2.
       atEnvMonv2VoltageTable 1.3.6.1.4.1.207.8.4.4.3.12.2 no-access
A table of information about voltage rails in the device that are monitored by environment monitoring hardware.
           atEnvMonv2VoltageEntry 1.3.6.1.4.1.207.8.4.4.3.12.2.1 no-access
The description, current value, upper & lower threshold settings and current status of a voltage rail.
               atEnvMonv2VoltageStackMemberId 1.3.6.1.4.1.207.8.4.4.3.12.2.1.1 unsigned32 read-only
The index of the stack member hosting this voltage sensor. For a chassis switch, it corresponds to the card ID of the active controller.
               atEnvMonv2VoltageBoardIndex 1.3.6.1.4.1.207.8.4.4.3.12.2.1.2 unsigned32 read-only
The index of the board hosting this voltage sensor in the board table.
               atEnvMonv2VoltageIndex 1.3.6.1.4.1.207.8.4.4.3.12.2.1.3 unsigned32 read-only
The numeric identifier of this voltage rail on its host board.
               atEnvMonv2VoltageDescription 1.3.6.1.4.1.207.8.4.4.3.12.2.1.4 displaystringunsized read-only
The description of this voltage rail.
               atEnvMonv2VoltageCurrent 1.3.6.1.4.1.207.8.4.4.3.12.2.1.5 integer read-only
The current reading of this voltage rail in millivolts.
               atEnvMonv2VoltageUpperThreshold 1.3.6.1.4.1.207.8.4.4.3.12.2.1.6 integer read-only
The maximum acceptable reading of this voltage rail in millivolts.
               atEnvMonv2VoltageLowerThreshold 1.3.6.1.4.1.207.8.4.4.3.12.2.1.7 integer read-only
The minimum acceptable reading of this voltage rail in millivolts.
               atEnvMonv2VoltageStatus 1.3.6.1.4.1.207.8.4.4.3.12.2.1.8 integer read-only
An indication of whether this voltage rail is currently in an alarm condition. A value of 'outOfRange' indicates that its current reading is outside its threshold range, 'inRange' indicates that the current reading is acceptable. Enumeration: 'inRange': 2, 'outOfRange': 1.
       atEnvMonv2TemperatureTable 1.3.6.1.4.1.207.8.4.4.3.12.3 no-access
A table of information about temperature sensors in the device that are monitored by environment monitoring hardware.
           atEnvMonv2TemperatureEntry 1.3.6.1.4.1.207.8.4.4.3.12.3.1 no-access
The description, current value, upper threshold setting and current status of a temperature sensor.
               atEnvMonv2TemperatureStackMemberId 1.3.6.1.4.1.207.8.4.4.3.12.3.1.1 unsigned32 read-only
The index of the stack member hosting this temperature sensor. For a chassis switch, it corresponds to the card ID of the active controller.
               atEnvMonv2TemperatureBoardIndex 1.3.6.1.4.1.207.8.4.4.3.12.3.1.2 unsigned32 read-only
The index of the board hosting this temperature sensor in the board table.
               atEnvMonv2TemperatureIndex 1.3.6.1.4.1.207.8.4.4.3.12.3.1.3 unsigned32 read-only
The numeric identifier of this temperature sensor on its host board.
               atEnvMonv2TemperatureDescription 1.3.6.1.4.1.207.8.4.4.3.12.3.1.4 displaystringunsized read-only
The description of this temperature sensor.
               atEnvMonv2TemperatureCurrent 1.3.6.1.4.1.207.8.4.4.3.12.3.1.5 integer read-only
The current reading of this temperature sensor in tenths of a degree Celsius.
               atEnvMonv2TemperatureUpperThreshold 1.3.6.1.4.1.207.8.4.4.3.12.3.1.6 integer read-only
The maximum acceptable reading of this temperature sensor in tenths of a degree Celsius.
               atEnvMonv2TemperatureStatus 1.3.6.1.4.1.207.8.4.4.3.12.3.1.7 integer read-only
An indication of whether this temperature sensor is currently in an alarm condition. A value of 'outOfRange' indicates that its current reading is outside its threshold range, 'inRange' indicates that the current reading is acceptable. Enumeration: 'inRange': 2, 'outOfRange': 1.
       atEnvMonv2PsbObjects 1.3.6.1.4.1.207.8.4.4.3.12.4
           atEnvMonv2PsbTable 1.3.6.1.4.1.207.8.4.4.3.12.4.1 no-access
A table of information about power supply bays in the system and any devices that are installed.
               atEnvMonv2PsbEntry 1.3.6.1.4.1.207.8.4.4.3.12.4.1.1 no-access
The description and current status of a power supply bay device.
                   atEnvMonv2PsbHostStackMemberId 1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.1 unsigned32 read-only
The index of the stack member hosting this power supply bay. For a chassis switch, it corresponds to the card ID of the active controller.
                   atEnvMonv2PsbHostBoardIndex 1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.2 unsigned32 read-only
The index of the board hosting this power supply bay in the board table.
                   atEnvMonv2PsbHostSlotIndex 1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.3 unsigned32 read-only
The index of this power supply bay on its host board. This index is fixed for each slot, on each type of board.
                   atEnvMonv2PsbHeldBoardIndex 1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.4 unsigned32 read-only
The index of a board installed in this power supply bay. This value corresponds to atEnvMonv2PsbSensorBoardIndex for each sensor on this board. A value of 0 indicates that a board is is either not present or not supported.
                   atEnvMonv2PsbHeldBoardId 1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.5 object identifier read-only
The type of board installed in this power supply bay. The values of this object are taken from the pprXxx object IDs under the boards sub-tree in the parent MIB. A value of 0 indicates that a board is either not present or not supported.
                   atEnvMonv2PsbDescription 1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.6 displaystringunsized read-only
The description of this power supply bay.
           atEnvMonv2PsbSensorTable 1.3.6.1.4.1.207.8.4.4.3.12.4.2 no-access
A table of information about environment monitoring sensors on devices installed in power supply bays.
               atEnvMonv2PsbSensorEntry 1.3.6.1.4.1.207.8.4.4.3.12.4.2.1 no-access
The description and current status of a device installed in a power supply bay.
                   atEnvMonv2PsbSensorStackMemberId 1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.1 unsigned32 read-only
The index of the stack member hosting this sensor. For a chassis switch, it corresponds to the card ID of the active controller.
                   atEnvMonv2PsbSensorBoardIndex 1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.2 unsigned32 read-only
The index of the board hosting this sensor in the board table.
                   atEnvMonv2PsbSensorIndex 1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.3 unsigned32 read-only
The index of this power supply bay environmental sensor on its host board.
                   atEnvMonv2PsbSensorType 1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.4 atenvmonv2psbsensortype read-only
The type of environmental variable this sensor detects.
                   atEnvMonv2PsbSensorDescription 1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.5 displaystringunsized read-only
The description of this power supply bay environmental sensor.
                   atEnvMonv2PsbSensorStatus 1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.6 integer read-only
An indication of whether this environmental sensor is currently in an alarm condition. A value of 'failed' indicates that the device is in a failure condition, 'good' indicates that the device is functioning normally. Enumeration: 'failed': 1, 'good': 2, 'notPowered': 3.
                   atEnvMonv2PsbSensorReading 1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.7 integer read-only
An indication of whether this environmental sensor is currently reading a value for the monitored device. A value of 'no' indicates that there is no current reading, 'yes' indicates that the monitored device is supplying a reading. Enumeration: 'yes': 2, 'no': 1.
       atEnvMonv2Traps 1.3.6.1.4.1.207.8.4.4.3.12.5
           atEnvMonv2FanAlarmSetEvent 1.3.6.1.4.1.207.8.4.4.3.12.5.1
A trap generated when the monitored speed of a fan drops below its lower threshold.
           atEnvMonv2FanAlarmClearedEvent 1.3.6.1.4.1.207.8.4.4.3.12.5.2
A trap generated when the monitored speed of a fan returns to an acceptable value, the fan having previously been in an alarm condition.
           atEnvMonv2VoltAlarmSetEvent 1.3.6.1.4.1.207.8.4.4.3.12.5.3
A trap generated when the voltage of a monitored voltage rail goes out of tolerance, either by dropping below its lower threshold, or exceeding its upper threshold.
           atEnvMonv2VoltAlarmClearedEvent 1.3.6.1.4.1.207.8.4.4.3.12.5.4
A trap generated when the voltage of a monitored voltage rail returns to an acceptable value, having previously been in an alarm condition.
           atEnvMonv2TempAlarmSetEvent 1.3.6.1.4.1.207.8.4.4.3.12.5.5
A trap generated when a monitored temperature exceeds its upper threshold.
           atEnvMonv2TempAlarmClearedEvent 1.3.6.1.4.1.207.8.4.4.3.12.5.6
A trap generated when a monitored temperature returns to an acceptable value, having previously been in an alarm condition.
           atEnvMonv2PsbAlarmSetEvent 1.3.6.1.4.1.207.8.4.4.3.12.5.7
A trap generated when a monitored parameter of a power supply bay device goes out of tolerance.
           atEnvMonv2PsbAlarmClearedEvent 1.3.6.1.4.1.207.8.4.4.3.12.5.8
A trap generated when a monitored parameter of a power supply bay device returns to an acceptable value, having previously been in an alarm condition.
       atEnvMonv2FaultLedTable 1.3.6.1.4.1.207.8.4.4.3.12.6 no-access
A table of information detailing any LED fault indications on the device.
           atEnvMonv2FaultLedEntry 1.3.6.1.4.1.207.8.4.4.3.12.6.1 no-access
An entry pertaining to a given fault LED.
               atEnvMonv2FaultLedStackMemberId 1.3.6.1.4.1.207.8.4.4.3.12.6.1.1 unsigned32 read-only
The index of the stack member hosting this fault LED. For a chassis switch, it corresponds to the card ID of the active controller.
               atEnvMonv2FaultLed1Flash 1.3.6.1.4.1.207.8.4.4.3.12.6.1.2 integer read-only
This object indicates whether a fault LED is currently showing a system failure by flashing once. It indicates that one or more heatsink fans have failed, or are operating below the recommended speed. Enumeration: 'noFault': 2, 'heatsinkFanFailure': 1.
               atEnvMonv2FaultLed2Flashes 1.3.6.1.4.1.207.8.4.4.3.12.6.1.3 integer read-only
This object indicates whether a fault LED is currently showing a system failure by flashing twice. It indicates that one or both of the chassis fans are not installed, or the fans are operating below the recommended speed. Enumeration: 'noFault': 2, 'chassisFanFailure': 1.
               atEnvMonv2FaultLed3Flashes 1.3.6.1.4.1.207.8.4.4.3.12.6.1.4 integer read-only
This object indicates whether a fault LED is currently showing a system failure by flashing three times. It indicates that the ability to monitor temperature or fans has failed. Enumeration: 'sensorFailure': 1, 'noFault': 2.
               atEnvMonv2FaultLed4Flashes 1.3.6.1.4.1.207.8.4.4.3.12.6.1.5 integer read-only
This object indicates whether a fault LED is currently showing a system failure by flashing four times. It indicates that an XEM failed to initialise or is incompatible. Enumeration: 'noFault': 2, 'xemInitialisationFailure': 1.
               atEnvMonv2FaultLed5Flashes 1.3.6.1.4.1.207.8.4.4.3.12.6.1.6 integer read-only
This object indicates whether a fault LED is currently showing a system failure by flashing five times. This flashing sequence is not currently in use. Enumeration: 'noFault': 2.
               atEnvMonv2FaultLed6Flashes 1.3.6.1.4.1.207.8.4.4.3.12.6.1.7 integer read-only
This object indicates whether a fault LED is currently showing a system failure by flashing six times. It indicates that the device's temperature has exceeded the recommended threshold. Enumeration: 'temperatureFailure': 1, 'noFault': 2.