AT-SYSINFO-MIB: View SNMP OID List / Download MIB

VENDOR: ALLIED TELESIS


 Home MIB: AT-SYSINFO-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, AT-SMI-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sysinfo 1.3.6.1.4.1.207.8.4.4.3
Subtree beneath which system inforamtion ids are assigned. It contains generic system information, as follows: { sysinfo 1 } fanAndPs { sysinfo 2 } restartGroup { sysinfo 3 } cpu { sysinfo 4 } sysTemperature { sysinfo 5 } atrContactDetails { sysinfo 6 } bbrNvs { sysinfo 9 } hostId { sysinfo 10 } envMon { sysinfo 11 } xem { sysinfo 12 } awpEnvMon { sysinfo 13 } awpStack { sysinfo 14 } atPortInfo
     fanAndPs 1.3.6.1.4.1.207.8.4.4.3.1
         fanAndPsTrap 1.3.6.1.4.1.207.8.4.4.3.1.0
             fanAndPsRpsConnectionTrap 1.3.6.1.4.1.207.8.4.4.3.1.0.1
Generated when the RPS connection status changes.
             fanAndPsMainPSUStatusTrap 1.3.6.1.4.1.207.8.4.4.3.1.0.2
Generated when the main power supply status changes.
             fanAndPsRedundantPSUStatusTrap 1.3.6.1.4.1.207.8.4.4.3.1.0.3
Generated when the RPS status changes.
             fanAndPsMainFanStatusTrap 1.3.6.1.4.1.207.8.4.4.3.1.0.4
Generated when the main fan changes status.
             fanAndPsRedundantFanStatusTrap 1.3.6.1.4.1.207.8.4.4.3.1.0.5
Generated when the redundant fan changes status.
             fanAndPsTemperatureStatusTrap 1.3.6.1.4.1.207.8.4.4.3.1.0.6
Generated when the temperature changes status.
             fanAndPsFanTrayPresentTrap 1.3.6.1.4.1.207.8.4.4.3.1.0.7
Generated when the fan tray presence status changes.
             fanAndPsFanTrayStatusTrap 1.3.6.1.4.1.207.8.4.4.3.1.0.8
Generated when the fan tray status changes.
             fanAndPsMainMonitoringStatusTrap 1.3.6.1.4.1.207.8.4.4.3.1.0.9
Generated when the main power supply monitoring status changes.
             fanAndPsAccelFanStatusTrap 1.3.6.1.4.1.207.8.4.4.3.1.0.10
Generated when the accelerator fans' status changes.
         fanAndPsRpsConnectionStatus 1.3.6.1.4.1.207.8.4.4.3.1.1 integer read-only
The status of the Redundant Power Supply (RPS) connection, ie, whether an RPS is actually connected or not, regardless of whether the RPS is on or not. notSupported means that an RPS is not supported in this hardware platform, connected means that the RPS is connected, notConnected means that the RPS is not connected, and notMonitoring means that the status of the RPS is not being monitored presently. RPS monitoring can be turned on via the variable fanAndPsRpsMonitoringStatus, or by the command SET SYSTEM RPSMONITOR=ON. Enumeration: 'notConnected': 2, 'notMonitoring': 3, 'notSupported': 0, 'connected': 1.
         fanAndPsMainPSUStatus 1.3.6.1.4.1.207.8.4.4.3.1.2 integer read-only
The status of the main Power Supply. on means that the power supply is present and fully operational. off means that the power supply is totally off (and obviously only applies to systems with a redundant power supply). faulty means that the main power supply is delivering power but that a component of the power supply is faulty. This applies to systems like SwitchBlade which have 3 power supplies but do not provide individual power supply monitoring. Also, in the case of SwitchBlade, power supply status includes the status of the fans in the power supply. Enumeration: 'on': 1, 'faulty': 3, 'off': 2.
         fanAndPsRedundantPSUStatus 1.3.6.1.4.1.207.8.4.4.3.1.3 integer read-only
The status of the redundant Power Supply. notSupported means this device does not support redundant power supplies, on means that the redundant power supply is connected and able to supply system power if required, off means that the redundant power supply is either not connected or is connected and is not able to supply system power if required, and notMonitoring means that the status of the RPS is not being monitored presently. RPS monitoring can be turned on via the variable fanAndPsRpsMonitoringStatus, or by the command SET SYSTEM RPSMONITOR=ON. Enumeration: 'on': 1, 'notSupported': 0, 'off': 2, 'notMonitoring': 3.
         fanAndPsRpsMonitoringStatus 1.3.6.1.4.1.207.8.4.4.3.1.4 integer read-write
The current status of redundant power supply monitoring. The monitoring of the redundant power supply and its fan must be enabled by command or by setting this variable to on. The value notSupported means that this device does not support redundant power supplies. Only the values on or off may be written to this variable. If this variables reads as notSupported, an attempt to write to this variable will result in a bad value error. Enumeration: 'on': 1, 'notSupported': 0, 'off': 2.
         fanAndPsMainFanStatus 1.3.6.1.4.1.207.8.4.4.3.1.5 integer read-only
The status of the main Power Supply fan. notSupported means that this device does not support monitoring on the main power supply fan, or that there is no main power supply fan. The warning means the fan's speed is outside 30% of the expected speed. Enumeration: 'notOk': 2, 'warning': 3, 'notSupported': 0, 'ok': 1.
         fanAndPsRedundantFanStatus 1.3.6.1.4.1.207.8.4.4.3.1.6 integer read-only
The status of the redundant Power Supply Fan. notSupported means this device does not support redundant power supplies, ok means that the redundant power supply fan is running, notOk means that the redundant power supply fan is not running, and notMonitoring means that the status of the RPS is not being monitored presently. RPS monitoring can be turned on via the variable fanAndPsRpsMonitoringStatus, or by the command SET SYSTEM RPSMONITOR=ON. Enumeration: 'notOk': 2, 'notSupported': 0, 'ok': 1, 'notMonitoring': 3.
         fanAndPsTemperatureStatus 1.3.6.1.4.1.207.8.4.4.3.1.7 integer read-only
The status of temperature in this device. ok means that the device is not capable of monitoring temperature or that the temperature is OK, notOk means that the temperature is being monitored and is currently out of the range 0C - 45C. Enumeration: 'notOk': 2, 'ok': 1.
         fanAndPsFanTrayPresent 1.3.6.1.4.1.207.8.4.4.3.1.8 integer read-only
The status of the presence of the fan tray in this system. Systems which do not support a fan tray return the value notSupported. Upon removal of the fan tray there is a short period (20s) before the value of this variable is changed to notPresent. This is to allow for scheduled replacement and/or cleaning of the fan tray. Enumeration: 'notPresent': 2, 'notSupported': 0, 'present': 1.
         fanAndPsFanTrayStatus 1.3.6.1.4.1.207.8.4.4.3.1.9 integer read-only
The status of the fan tray in this system. Systems which do not support a fan tray return the value notSupported. The value ok is returned if all fans in the fan tray are running at full speed. The value notOk is returned if one of more of the fan tray fans is running slow or has stalled. Enumeration: 'notOk': 2, 'notSupported': 0, 'ok': 1.
         fanAndPsMainMonitoringStatus 1.3.6.1.4.1.207.8.4.4.3.1.10 integer read-only
The current status of main power supply monitoring. The monitoring of the main power supply and its fan is always enabled by those systems that support it. Systems which do not support main power supply or fan monitoring report a value of notSupported. The value ok is returned for those systems that do support main power supply and fan monitoring, and where the monitoring operation is reporting valid information (refer to fanAndPsMainFanStatus for the current status of the system). When main power supply and fan monitoring is failing, the value notOk is returned. Enumeration: 'notOk': 2, 'notSupported': 0, 'ok': 1.
         fanAndPsPsuStatusTable 1.3.6.1.4.1.207.8.4.4.3.1.11 no-access
The table of AT8948 fanAndPsPsuStatusTable. Each entry in the table represents the status of one of the power supplies in AT8948 system. Each power supply has its own board ID.
               fanAndPsPsuStatusEntry 1.3.6.1.4.1.207.8.4.4.3.1.11.1 no-access
A single entry of AT8948 fanAndPsPsuStatusTable, indexed by fanAndPsPsuNumber field.
                   fanAndPsPsuNumber 1.3.6.1.4.1.207.8.4.4.3.1.11.1.1 integer read-only
The PSU board identity for which this entry holds. If the system consists only of a single PSU board, only one entry will appear in the table, whose index is 1.
                   fanAndPsPsuPresent 1.3.6.1.4.1.207.8.4.4.3.1.11.1.2 integer read-only
The PSU present state, displayed as 'yes' if present, or 'no' if absent. Enumeration: 'yes': 0, 'no': 1.
                   fanAndPsPsuType 1.3.6.1.4.1.207.8.4.4.3.1.11.1.3 integer read-only
The PSU type, displayed as AC, or DC, or FAN, or NOT PRESENT. Enumeration: 'ac': 0, 'notSupported': 4, 'fan': 2, 'dc': 1, 'notPresent': 3.
                   fanAndPsPsuFan 1.3.6.1.4.1.207.8.4.4.3.1.11.1.4 integer read-only
The PSU fan status, displayed as OK, or FAIL, or NOT PRESENT. Enumeration: 'fail': 1, 'notPresent': 2, 'notSupported': 3, 'ok': 0.
                   fanAndPsPsuTemperature 1.3.6.1.4.1.207.8.4.4.3.1.11.1.5 integer read-only
The PSU temperature, displayed as GOOD, or HIGH, or NOT PRESENT, or NOT SUPPORTED. Enumeration: 'high': 1, 'notPresent': 2, 'good': 0, 'notSupported': 3.
                   fanAndPsPsuPower 1.3.6.1.4.1.207.8.4.4.3.1.11.1.6 integer read-only
The PSU power status, displayed as GOOD, or BAD, or NOT PRESENT or NOT SUPPORTED. Enumeration: 'notSupported': 3, 'bad': 1, 'good': 0, 'notPresent': 2.
         fanAndPsAccelFanStatus 1.3.6.1.4.1.207.8.4.4.3.1.12 integer read-only
The status of the accelerator card fans. Non-supported means this device does not support monitoring of the accelerator card fans. Enumeration: 'notOk': 2, 'notSupported': 0, 'ok': 1.
     restartGroup 1.3.6.1.4.1.207.8.4.4.3.2
         restart 1.3.6.1.4.1.207.8.4.4.3.2.1 integer read-write
A router/switch restart request. A management station can remotely instruct an ATI router/switch to action a warm or cold restart. Once all the appropriate internal checks have been made, the router/switch will acknowledge the request via normal SNMP channels. The restart instruction will be actioned after waiting for a period of 5 seconds, this is because the SNMP acknowledgement packet needs time to reach the management station. Once the request has been actioned, it can not be cancelled and communication with the router/switch will be lost during system initialisation. Enumeration: 'restartWarm': 1, 'restartCold': 2, 'restartNone': 0.
         restartCause 1.3.6.1.4.1.207.8.4.4.3.2.2 integer read-only
The reason for last time restart. Enumeration: 'hardwareReset': 1, 'softwareException': 4, 'softwareLicenceCheckFailure': 6, 'unknown': 0, 'powerOnSelfTestfailure': 7, 'softwareInvalidImage': 5, 'hardwareWatchdog': 2, 'softwareRequest': 3.
         restartLog 1.3.6.1.4.1.207.8.4.4.3.2.3 displaystringunsized read-only
The restart logging details.
         restartNotification 1.3.6.1.4.1.207.8.4.4.3.2.11
A restart notification is a trap sent to tell snmp managers the reason of restarting
     cpu 1.3.6.1.4.1.207.8.4.4.3.3
         cpuUtilisationMax 1.3.6.1.4.1.207.8.4.4.3.3.1 integer read-only
Maximum CPU utilisation since the router was last restarted. Expressed as a percentage.
         cpuUtilisationAvg 1.3.6.1.4.1.207.8.4.4.3.3.2 integer read-only
Average CPU utilisation since the router was last restarted. Expressed as a percentage.
         cpuUtilisationAvgLastMinute 1.3.6.1.4.1.207.8.4.4.3.3.3 integer read-only
Average CPU utilisation over the past minute. Expressed as a percentage.
         cpuUtilisationAvgLast10Seconds 1.3.6.1.4.1.207.8.4.4.3.3.4 integer read-only
Average CPU utilisation over the past ten seconds. Expressed as a percentage.
         cpuUtilisationAvgLastSecond 1.3.6.1.4.1.207.8.4.4.3.3.5 integer read-only
Average CPU utilisation over the past second. Expressed as a percentage.
         cpuUtilisationMaxLast5Minutes 1.3.6.1.4.1.207.8.4.4.3.3.6 integer read-only
Maximum CPU utilisation over the last 5 minutes. Expressed as a percentage.
         cpuUtilisationAvgLast5Minutes 1.3.6.1.4.1.207.8.4.4.3.3.7 integer read-only
Average CPU utilisation over the past 5 minutes. Expressed as a percentage.
         cpuUtilisationStackTable 1.3.6.1.4.1.207.8.4.4.3.3.8 no-access
A list of stack members. For a chassis switch, this is a list of cards.
             cpuUtilisationStackEntry 1.3.6.1.4.1.207.8.4.4.3.3.8.1 no-access
A set of parameters that describe the CPU utilisation of a stack member. For a chassis switch, it corresponds to the CPU utilisation of a card.
                 cpuUtilisationStackId 1.3.6.1.4.1.207.8.4.4.3.3.8.1.1 unsigned32 read-only
Stack member ID. For a chassis switch, it corresponds to the card ID.
                 cpuUtilisationStackMax 1.3.6.1.4.1.207.8.4.4.3.3.8.1.2 integer read-only
Maximum CPU utilisation since the router was last restarted. Expressed as a percentage.
                 cpuUtilisationStackAvg 1.3.6.1.4.1.207.8.4.4.3.3.8.1.3 integer read-only
Average CPU utilisation since the router was last restarted. Expressed as a percentage.
                 cpuUtilisationStackAvgLastMinute 1.3.6.1.4.1.207.8.4.4.3.3.8.1.4 integer read-only
Average CPU utilisation over the past minute. Expressed as a percentage.
                 cpuUtilisationStackAvgLast10Seconds 1.3.6.1.4.1.207.8.4.4.3.3.8.1.5 integer read-only
Average CPU utilisation over the past ten seconds. Expressed as a percentage.
                 cpuUtilisationStackAvgLastSecond 1.3.6.1.4.1.207.8.4.4.3.3.8.1.6 integer read-only
Average CPU utilisation over the past second. Expressed as a percentage.
                 cpuUtilisationStackMaxLast5Minutes 1.3.6.1.4.1.207.8.4.4.3.3.8.1.7 integer read-only
Maximum CPU utilisation over the last 5 minutes. Expressed as a percentage.
                 cpuUtilisationStackAvgLast5Minutes 1.3.6.1.4.1.207.8.4.4.3.3.8.1.8 integer read-only
Average CPU utilisation over the past 5 minutes. Expressed as a percentage.
     sysTemperature 1.3.6.1.4.1.207.8.4.4.3.4
         generalTemperature 1.3.6.1.4.1.207.8.4.4.3.4.1
             generalTemperatureTrap 1.3.6.1.4.1.207.8.4.4.3.4.1.0
                 generalTemperatureStatusTrap 1.3.6.1.4.1.207.8.4.4.3.4.1.0.1
Generated when the temperature status of the device changes.
             generalTemperatureSupported 1.3.6.1.4.1.207.8.4.4.3.4.1.1 integer read-only
The value supported indicates general temperature is displayed by the device. The value notSupported indicates the device displays specific temperature information or none at all. Enumeration: 'supported': 1, 'notSupported': 0.
             generalTemperatureActualTemp 1.3.6.1.4.1.207.8.4.4.3.4.1.2 integer read-only
The current temperature of product's base board, in degrees Celsius. A device which doesn't support this group will return the value 0 for this variable.
             generalTemperatureStatus 1.3.6.1.4.1.207.8.4.4.3.4.1.3 integer read-only
The status of temperature in this device. ok indicates the temperature is below the threshold temperature or the device is not capable of monitoring temperature. notOk indicates the temperature is being monitored and is currently above the threshold temperature (displayed in generalTemperatureThreshold). Enumeration: 'notOk': 2, 'ok': 1.
             generalTemperatureThreshold 1.3.6.1.4.1.207.8.4.4.3.4.1.4 integer read-write
The temperature threshold for the device. If the temperature of the device rises above this threshold generalTemeratureStatus will indicate a notOk status.
         sbTemperature 1.3.6.1.4.1.207.8.4.4.3.4.2
             sbTemperatureTrap 1.3.6.1.4.1.207.8.4.4.3.4.2.0
                 sbTempFixedThresholdTrap 1.3.6.1.4.1.207.8.4.4.3.4.2.0.1
Trap occurs when fixed threshold status changes. The actual temperature and the fixed threshold are also given.
                 sbTempSettableThresholdTrap 1.3.6.1.4.1.207.8.4.4.3.4.2.0.2
Trap occurs when settable threshold status changes. The actual temperature and the settable threshold are also given.
             sbTempTable 1.3.6.1.4.1.207.8.4.4.3.4.2.1 no-access
The table of SwitchBlade sysTemperature. Each entry in the table represents temperature monitoring from one of the CPU cards which may be present in the SwitchBlade system.
                 sbTempEntry 1.3.6.1.4.1.207.8.4.4.3.4.2.1.1 no-access
A single entry of SwitchBlade sysTemperature
                     sbTempIndex 1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.1 integer read-only
The board for which this temperature entry holds. If the system consists only of a single CPU board, only one entry will appear in the table, whose index is master(1). Enumeration: 'slave': 2, 'master': 1.
                     sbTempActualTemperature 1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.2 integer read-only
The actual SwitchBlade temperature. This temperature is measured within the SwitchBlade CPU, and is sampled at 1 second intervals.
                     sbTempFixedThresholdStatus 1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.3 integer read-only
The temperature status with regard to the fixed temperature threshold. The value of the fixed temperature threshold is set at 90 degrees C. This variable represents whether the actual temperature is above the threshold (value is crossover(2)) or below the threshold (value is normal(1)). If the temperature is exactly the same as the fixed temperature threshold, the value of this variable reads as normal(1). Enumeration: 'crossover': 2, 'normal': 1.
                     sbTempSettableThresholdStatus 1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.4 integer read-only
The temperature status with regard to the settable temperature threshold. The value of the settable temperature threshold is set by management intervention. This variable represents whether the actual temperature is above the threshold (value is crossover(2)) or below the threshold (value is normal(1)). When the value of this variable is undefined(3), no settable threshold has been specified and the value of sbTempSettableThreshold is not used. Enumeration: 'crossover': 2, 'undefined': 3, 'normal': 1.
                     sbTempSettableThreshold 1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.5 integer read-write
The value of the settable temperature threshold. This can be set independently for each temperature entry. The value of this threshold is only valid when sbTempSettableThresholdStatus is not set to undefined(3).
             sbTempFixedThreshold 1.3.6.1.4.1.207.8.4.4.3.4.2.2 integer read-only
The value of the fixed temperature threshold. This value is fixed for both CPU cards, and cannot be set.
         acceleratorTemperature 1.3.6.1.4.1.207.8.4.4.3.4.3
             acceleratorTemperatureTrap 1.3.6.1.4.1.207.8.4.4.3.4.3.0
                 acceleratorTemperatureStatusTrap 1.3.6.1.4.1.207.8.4.4.3.4.3.0.1
Generated when the temperature status of the device changes.
             acceleratorTemperatureSupported 1.3.6.1.4.1.207.8.4.4.3.4.3.1 integer read-only
The value supported indicates whether accelerator card temperature is displayed by the device. The value notSupported indicates the device does not display specific accelerator card temperature information. Enumeration: 'supported': 1, 'notSupported': 0.
             acceleratorTemperatureActualTemp 1.3.6.1.4.1.207.8.4.4.3.4.3.2 integer read-only
The current temperature of product's base board, in degrees Celsius. A device which doesn't support this group will return the value 0 for this variable.
             acceleratorTemperatureStatus 1.3.6.1.4.1.207.8.4.4.3.4.3.3 integer read-only
The status of temperature in this device. ok indicates the temperature is below the threshold temperature or the device is not capable of monitoring temperature. notOk indicates the temperature is being monitored and is currently above the threshold temperature (displayed in generalTemperatureThreshold). Enumeration: 'notOk': 2, 'ok': 1.
             acceleratorTemperatureThreshold 1.3.6.1.4.1.207.8.4.4.3.4.3.4 integer read-only
The temperature threshold for the device. If the temperature of the device rises above this threshold generalTemeratureStatus will indicate a notOk status.
     atContactDetails 1.3.6.1.4.1.207.8.4.4.3.5 displaystring read-only
The contact details for Allied Telesis inc.
     bbrNvs 1.3.6.1.4.1.207.8.4.4.3.6
         bbrNvsTrap 1.3.6.1.4.1.207.8.4.4.3.6.0
             bbrNvsReinitialiseTrap 1.3.6.1.4.1.207.8.4.4.3.6.0.1
Generated at boot when the device detects that the BBR has been corrupted and reinitialised. This can happen if the device's BBR battery has run down, and the device has been powered off, then on.
     memory 1.3.6.1.4.1.207.8.4.4.3.7
         freeMemory 1.3.6.1.4.1.207.8.4.4.3.7.1 integer read-only
Percentage of free memory still available on device
         totalBuffers 1.3.6.1.4.1.207.8.4.4.3.7.2 integer read-only
Total number of buffers available on device
         lowMemoryTrap 1.3.6.1.4.1.207.8.4.4.3.7.11
A low memory trap is generated when a router's memory has gone below a certain level.
     realTimeClockStatus 1.3.6.1.4.1.207.8.4.4.3.8 integer read-only
Shows the status of the real time clock Enumeration: 'invalid': 0, 'normal': 1.
     hostId 1.3.6.1.4.1.207.8.4.4.3.9 integer read-write
Host Identifier of this device
     atPortInfo 1.3.6.1.4.1.207.8.4.4.3.14
           atPortInfoTransceiverTable 1.3.6.1.4.1.207.8.4.4.3.14.1 no-access
A table of information about the transceiver of a interface.
               atPortInfoTransceiverEntry 1.3.6.1.4.1.207.8.4.4.3.14.1.1 no-access
The description, the transceiver type of a interface.
                   atPortInfoTransceiverifIndex 1.3.6.1.4.1.207.8.4.4.3.14.1.1.1 interfaceindex read-only
The ifIndex for the interface represented by this entry of the interfaces table.
                   atPortInfoTransceiverType 1.3.6.1.4.1.207.8.4.4.3.14.1.1.2 integer read-only
This object indicates the type of transceiver on a interface. Enumeration: 'inf-1-x-copper-actv': 31, 'sfpp-lr': 27, 'xfp-er': 19, 'xfp-ew': 23, 'sfp-fx': 4, 'sfp-oc3-lr': 11, 'cx4': 34, 'inf-1-x-lx': 32, 'sfpp-er': 28, 'sfp-lx': 9, 'unknown': 24, 'xfp-srsw': 14, 'xfp-lrlw': 15, 'rj45': 1, 'sfp-px': 2, 'sfp-zx-cwdm': 8, 'empty': 25, 'sfp-oc3-mm': 13, 'sfp-bx10': 3, 'sfp-cx': 7, 'xfp-erew': 16, 'sfp-100base-lx': 5, 'sfpp-lrm': 29, 'sfpp-sr': 26, 'sfp-oc3-ir': 12, 'inf-1-x-copper-pasv': 30, 'xfp-lrm': 20, 'sfp-t': 6, 'inf-1-x-sx': 33, 'sfp-sx': 10, 'xfp-sr': 17, 'xfp-lr': 18, 'xfp-lw': 22, 'xfp-sw': 21.
           atPortRenumberEvents 1.3.6.1.4.1.207.8.4.4.3.14.2 integer read-only
The number of times that port number values (represented by the dot1dBasePort object in BRIDGE-MIB), have been re-assigned due to stack member leave/join events or XEM hot-swap events, since the system was initialised.