ASCEND-MIBTRAP-MIB: View SNMP OID List / Download MIB

VENDOR: ASCEND COMMUNICATIONS INC.


 Home MIB: ASCEND-MIBTRAP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, ASCEND-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mibtrapProfile 1.3.6.1.4.1.529.23.132
         mibtrapProfileTable 1.3.6.1.4.1.529.23.132.1 no-access
A list of mibtrapProfile profile entries.
             mibtrapProfileEntry 1.3.6.1.4.1.529.23.132.1.1 no-access
A mibtrapProfile entry containing objects that maps to the parameters of mibtrapProfile profile.
                 trapProfile_HostName 1.3.6.1.4.1.529.23.132.1.1.1 displaystring read-only
The name of the host to send traps to. When DNS or YP/NIS is supported this name will be used to look up the LAN address when hostAddress is 0.
                 trapProfile_ActiveEnabled 1.3.6.1.4.1.529.23.132.1.1.2 integer read-write
If TRUE, profile is enabled to send traps to this target Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_CommunityName 1.3.6.1.4.1.529.23.132.1.1.3 displaystring read-write
The community name associated with the SNMP PDU.
                 trapProfile_HostAddress 1.3.6.1.4.1.529.23.132.1.1.4 ipaddress read-write
The LAN address of the named host. If 0 the address will be looked up via DNS or YP/NIS when supported.
                 trapProfile_HostPort 1.3.6.1.4.1.529.23.132.1.1.5 integer read-write
Port number of the named host. Value 0 is not allowed
                 trapProfile_InformTimeOut 1.3.6.1.4.1.529.23.132.1.1.6 integer read-only
Timeout interval in units of 0.01 seconds after which the Inform PDU is retransmitted on receiving no acknowledgement
                 trapProfile_InformRetryCount 1.3.6.1.4.1.529.23.132.1.1.7 integer read-only
Number of retries attempted when acknowledgement is not received for an Inform PDU
                 trapProfile_NotifyTagList 1.3.6.1.4.1.529.23.132.1.1.8 octet string read-write
String containing a list of tag values that are used to select target addresses for a particular operation.
                 trapProfile_TargetParamsName 1.3.6.1.4.1.529.23.132.1.1.9 octet string read-write
Index to the row an entry in SNMPV3-TARGET-PARAM table which is used when generating messages to be sent to this host-address
                 trapProfile_AgentAddress 1.3.6.1.4.1.529.23.132.1.1.10 ipaddress read-write
The IP address of the object, generating the SNMP trap.
                 trapProfile_AlarmEnabled 1.3.6.1.4.1.529.23.132.1.1.11 integer read-write
TRUE if alarm class traps are to be sent to the identified host. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_SecurityEnabled 1.3.6.1.4.1.529.23.132.1.1.12 integer read-write
TRUE if security class traps are to be sent to the identified host. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_PortEnabled 1.3.6.1.4.1.529.23.132.1.1.13 integer read-write
TRUE if port class traps are to be sent to the identified host. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_SlotEnabled 1.3.6.1.4.1.529.23.132.1.1.14 integer read-write
TRUE if slot class traps are to be sent to the identified host. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_ColdstartEnabled 1.3.6.1.4.1.529.23.132.1.1.15 integer read-write
TRUE if cold start trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_WarmstartEnabled 1.3.6.1.4.1.529.23.132.1.1.16 integer read-write
TRUE if warm start trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_LinkdownEnabled 1.3.6.1.4.1.529.23.132.1.1.17 integer read-write
TRUE if link down trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_LinkupEnabled 1.3.6.1.4.1.529.23.132.1.1.18 integer read-write
TRUE if link up trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_AscendEnabled 1.3.6.1.4.1.529.23.132.1.1.19 integer read-write
TRUE if Ascend trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_ConsoleEnabled 1.3.6.1.4.1.529.23.132.1.1.20 integer read-write
TRUE if console trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_UseExceededEnabled 1.3.6.1.4.1.529.23.132.1.1.21 integer read-write
TRUE if use exceeded trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_PasswordEnabled 1.3.6.1.4.1.529.23.132.1.1.22 integer read-write
TRUE if Telnet password trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_FrLinkupEnabled 1.3.6.1.4.1.529.23.132.1.1.23 integer read-write
TRUE if FR link up trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_FrLinkdownEnabled 1.3.6.1.4.1.529.23.132.1.1.24 integer read-write
TRUE if FR Link Down trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_EventOverwriteEnabled 1.3.6.1.4.1.529.23.132.1.1.25 integer read-write
TRUE if event Overwrite trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_RadiusChangeEnabled 1.3.6.1.4.1.529.23.132.1.1.26 integer read-write
TRUE if radius change trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_McastMonitorEnabled 1.3.6.1.4.1.529.23.132.1.1.27 integer read-write
TRUE if multicast monitor trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_LanModemEnabled 1.3.6.1.4.1.529.23.132.1.1.28 integer read-write
TRUE if lan modem trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_DirdoEnabled 1.3.6.1.4.1.529.23.132.1.1.29 integer read-write
TRUE if DIRDO trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_SlotProfileChangeEnabled 1.3.6.1.4.1.529.23.132.1.1.30 integer read-write
TRUE if slot profile change trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_PowerSupplyEnabled 1.3.6.1.4.1.529.23.132.1.1.31 integer read-write
TRUE if power supply changed trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_MultishelfEnabled 1.3.6.1.4.1.529.23.132.1.1.32 integer read-write
TRUE if multi-shelf controller state trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_AuthenticationEnabled 1.3.6.1.4.1.529.23.132.1.1.33 integer read-write
TRUE if SNMP authentication trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_ConfigChangeEnabled 1.3.6.1.4.1.529.23.132.1.1.34 integer read-write
TRUE if SNMP configuration change trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_SysClockDriftEnabled 1.3.6.1.4.1.529.23.132.1.1.35 integer read-write
TRUE if system clock drifted trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_PrimarySdtnEmptyEnabled 1.3.6.1.4.1.529.23.132.1.1.36 integer read-write
TRUE if SDTN Primary List Empty trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_SecondarySdtnEmptyEnabled 1.3.6.1.4.1.529.23.132.1.1.37 integer read-write
TRUE if SDTN Secondary List Empty trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_SuspectAccessResourceEnabled 1.3.6.1.4.1.529.23.132.1.1.38 integer read-write
TRUE if suspect access resource trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_OspfEnabled 1.3.6.1.4.1.529.23.132.1.1.39 integer read-write
TRUE if OSPF traps are to be sent to the identified host. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_OspfIfConfigErrorEnabled 1.3.6.1.4.1.529.23.132.1.1.40 integer read-write
TRUE if OSPF interface configuration error trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_OspfIfAuthFailureEnabled 1.3.6.1.4.1.529.23.132.1.1.41 integer read-write
TRUE if OSPF interface authentication failure trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_OspfIfStateChangeEnabled 1.3.6.1.4.1.529.23.132.1.1.42 integer read-write
TRUE if OSPF interface state change trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_OspfIfRxBadPacket 1.3.6.1.4.1.529.23.132.1.1.43 integer read-write
TRUE if OSPF interface receive bad packet trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_OspfTxRetransmitEnabled 1.3.6.1.4.1.529.23.132.1.1.44 integer read-write
TRUE if OSPF retransmit trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_OspfNbrStateChangeEnabled 1.3.6.1.4.1.529.23.132.1.1.45 integer read-write
TRUE if OSPF neighbor state change trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_OspfVirtIfConfigErrorEnabled 1.3.6.1.4.1.529.23.132.1.1.46 integer read-write
TRUE if OSPF virtual interface configuration error trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_OspfVirtIfAuthFailureEnabled 1.3.6.1.4.1.529.23.132.1.1.47 integer read-write
TRUE if OSPF virtual interface authentication failure trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_OspfVirtIfStateChangeEnabled 1.3.6.1.4.1.529.23.132.1.1.48 integer read-write
TRUE if OSPF virtual interface state change trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_OspfVirtIfRxBadPacket 1.3.6.1.4.1.529.23.132.1.1.49 integer read-write
TRUE if OSPF virtual interface receive bad packet trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_OspfVirtIfTxRetransmitEnabled 1.3.6.1.4.1.529.23.132.1.1.50 integer read-write
TRUE if OSPF virtual interface retransmit trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_OspfVirtNbrStateChangeEnabled 1.3.6.1.4.1.529.23.132.1.1.51 integer read-write
TRUE if OSPF virtual neighbor state change trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_OspfOriginateLsaEnabled 1.3.6.1.4.1.529.23.132.1.1.52 integer read-write
TRUE if OSPF originate LSA trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_OspfMaxAgeLsaEnabled 1.3.6.1.4.1.529.23.132.1.1.53 integer read-write
TRUE if OSPF MaxAgeLsa trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_OspfLsdbOverflowEnabled 1.3.6.1.4.1.529.23.132.1.1.54 integer read-write
TRUE if OSPF LSDB overflow trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_OspfApproachingOverflowEnabled 1.3.6.1.4.1.529.23.132.1.1.55 integer read-write
TRUE if OSPF LSDB approaching overflow trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_WatchdogWarningEnabled 1.3.6.1.4.1.529.23.132.1.1.56 integer read-write
TRUE if watchdog warning trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_ControllerSwitchoverEnabled 1.3.6.1.4.1.529.23.132.1.1.57 integer read-write
TRUE if controller switchover trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_CallLogServChangeEnabled 1.3.6.1.4.1.529.23.132.1.1.58 integer read-write
TRUE if call logging server change trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_VoipGkChangeEnabled 1.3.6.1.4.1.529.23.132.1.1.59 integer read-write
TRUE if VOIP gatekeeper change trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_WanLineStateChangeEnabled 1.3.6.1.4.1.529.23.132.1.1.60 integer read-write
TRUE if WAN line state change trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_CallLogDroppedPktEnabled 1.3.6.1.4.1.529.23.132.1.1.61 integer read-write
TRUE if call logging dropped packet trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_LimSparingEnabled 1.3.6.1.4.1.529.23.132.1.1.62 integer read-write
TRUE if LIM sparing trap should to be sent to the identified host. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_InterfaceSparingEnabled 1.3.6.1.4.1.529.23.132.1.1.63 integer read-write
TRUE if interface (port) sparing trap should to be sent to the identified host. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_MegacoLinkStatusEnabled 1.3.6.1.4.1.529.23.132.1.1.64 integer read-write
TRUE if the trap that reports changes in the operational status of media gateway control link(s) is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_SecondaryControllerStateChangeEnabled 1.3.6.1.4.1.529.23.132.1.1.65 integer read-write
TRUE if cntrReduAvailTrap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_PctfiTrunkStatusChangeEnabled 1.3.6.1.4.1.529.23.132.1.1.66 integer read-write
TRUE if enabledPctfiTrunkStatusChange is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_NoResourceAvailableEnabled 1.3.6.1.4.1.529.23.132.1.1.67 integer read-write
TRUE if No Resource Available to answer call is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_DslThreshTrapEnabled 1.3.6.1.4.1.529.23.132.1.1.68 integer read-write
TRUE if various DSL threshold traps should be sent to the identified host. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_AtmPvcFailureTrapEnabled 1.3.6.1.4.1.529.23.132.1.1.69 integer read-write
TRUE if PVC or Soft PVC failure trap should be sent to the identified host. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_AtmImaAlarmTrapEnabled 1.3.6.1.4.1.529.23.132.1.1.70 integer read-write
TRUE if IMA Alarm trap should be sent to the identified host. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_AscendLinkDownTrapEnabled 1.3.6.1.4.1.529.23.132.1.1.71 integer read-write
TRUE if the ascend link down trap should be sent to the identified host. This can be enabled only if linkdown-enabled is enabled. This is an alarm class trap. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_AscendLinkUpTrapEnabled 1.3.6.1.4.1.529.23.132.1.1.72 integer read-write
TRUE if the ascend link up trap should be sent to the identified host. This can be enabled only if linkup-enabled is enabled. This is an alarm class trap. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_SnmpIllegalAccessAttempt 1.3.6.1.4.1.529.23.132.1.1.73 integer read-write
TRUE if the ascend security alert trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_Action_o 1.3.6.1.4.1.529.23.132.1.1.74 integer read-write
Enumeration: 'deleteProfile': 3, 'createProfile': 2, 'noAction': 1.
                 trapProfile_NotificationLogEnable 1.3.6.1.4.1.529.23.132.1.1.75 integer read-write
YES if notifications sent on behalf of this entry needs to be logged. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_NotificationLogLimit 1.3.6.1.4.1.529.23.132.1.1.76 integer read-write
The maximum number of notification entries that can be held in the notification log.
                 trapProfile_Hdsl2ShdslThresholdTrapsEnabled 1.3.6.1.4.1.529.23.132.1.1.77 integer read-write
Set to TRUE to enable HDSL2/SHDSL threshold traps. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_ClockChangeTrapEnabled 1.3.6.1.4.1.529.23.132.1.1.78 integer read-write
TRUE if clock change trap is enabled. Enumeration: 'yes': 2, 'no': 1.
                 trapProfile_L2tpTunnelTrapEnabled 1.3.6.1.4.1.529.23.132.1.1.79 integer read-write
TRUE if L2TP Setup failure and L2TP Tunnel Disconnect trap should be sent to the identified host. Enumeration: 'yes': 2, 'no': 1.