ASCEND-MIB: View SNMP OID List / Download MIB

A list of do entries.

An entry containing all of the action (do) commands and the slot and item index.

The index of the slot containing the item for which an action is desired. The valid range is 1 through the value slotNumber.

The item number on the indexed slot for which an action is desired. The valid range is 1 through the value slotItems in the slotTable when indexed by a value equal to doSlotIndex.

When read returns valid if the indexed slot/item can dial a call. Writing any value will cause a call to be placed when valid, otherwise the write is ignored. Enumeration: 'valid': 1, 'notValid': 2.

When read returns valid if the indexed slot/item can terminate a call. Writing any value will cause the call to be terminated when valid, otherwise the write is ignored. Enumeration: 'valid': 1, 'notValid': 2.

When read returns valid if the indexed slot/item can answer a call. Writing any value will cause the call to be answered when valid, otherwise the write is ignored. Enumeration: 'valid': 1, 'notValid': 2.

When read returns valid if the indexed slot/item can extend bandwidth. Writing any value will cause bandwidth to be extended when valid, otherwise the write is ignored. Enumeration: 'valid': 1, 'notValid': 2.

When read returns valid if the indexed slot/item can contract bandwidth. Writing any value will cause bandwidth to be contracted when valid, otherwise the write is ignored. Enumeration: 'valid': 1, 'notValid': 2.

When read returns valid if the indexed slot/item can enter or exit remote loopback. Writing any value will cause the current remote loopback state to be toggled when valid, otherwise the write is ignored. Enumeration: 'valid': 1, 'notValid': 2.

When read returns valid if the indexed slot/item can enter or exit BERT test mode. Writing any value will cause the current BERT test state to be toggled when valid, otherwise the write is ignored. Enumeration: 'valid': 1, 'notValid': 2.

When read returns valid if the indexed slot/item can issue a resynchronize command. Writing any value will cause a resynchronize command to be issued when valid, otherwise the write is ignored. Enumeration: 'valid': 1, 'notValid': 2.

A table of host port status entries. A host port status entry potentialy exists for every slot/item. Host port status entries are only meaningful for slot/items that reference a host port. When indexed by other slot/items NO SUCH NAME will be returned.

An entry containing the host port status of the indexed slot/item.

A unique value for each slot. The slot identified by a particular value of this index is the same slot as identified by the same value of slotIndex.

Index to each item defined for each slot. Since entries in this table are only valid for host ports an item number is a port number within the indexed slot.

The name from the current call profile of the indexed host slot and port.

The phone number from the current call profile of the indexed host slot and port.

The type of call from the current call profile of the indexed host slot and port. Enumeration: 'ft1': 5, 'two-channel': 4, 'ft1BandO': 7, 'aim': 1, 'bonding': 2, 'ft1Aim': 6, 'one-channel': 3.

The call management protocol from the current call profile for the indexed host slot and port. Call management is only meaningful for calls using an inverse multiplexing protocol. Enumeration: 'none': 1, 'mode2': 9, 'mode3': 10, 'mode0': 11, 'mode1': 8, 'dynamic': 4, 'manual': 2, 'one-of-40': 7, 'static': 3, 'delta': 5, 'one-of-8': 6.

The type of service from the current call profile for the indexed host slot and port. Enumeration: 'serviceV110-24-56K': 38, 'service512K': 15, 'serviceV110-96-56K': 40, 'service1664K': 32, 'service1728K': 33, 'service1344K': 28, 'service1408K': 29, 'service1088K': 24, 'serviceV110-24-64KR': 53, 'service1216K': 26, 'service192K': 10, 'serviceV110-96-56KR': 45, 'serviceV110-24-64K': 48, 'service1472K': 30, 'service1856K': 35, 'service1152K': 25, 'service56KR': 2, 'service896K': 21, 'serviceV110-192-64K': 51, 'serviceV110-24-56KR': 43, 'serviceModem': 37, 'serviceV110-192-56K': 41, 'service56K': 3, 'serviceV110-192-56KR': 46, 'service768K': 19, 'service640K': 17, 'serviceV110-96-64KR': 55, 'service1024K': 23, 'service832K': 20, 'serviceV110-384-56K': 42, 'service1920K': 36, 'service448K': 14, 'service1280K': 27, 'service384K': 13, 'service960K': 22, 'serviceV110-384-64KR': 57, 'serviceV110-384-56KR': 47, 'service1536K': 7, 'serviceV110-192-64KR': 56, 'service1792K': 34, 'service1536KR': 8, 'service128K': 9, 'serviceV110-48-56KR': 44, 'service64K': 4, 'service320K': 12, 'serviceV110-96-64K': 50, 'service384K-H0': 6, 'serviceV110-48-56K': 39, 'serviceV110-48-64KR': 54, 'service1600K': 31, 'service256K': 11, 'service704K': 18, 'serviceVoice': 1, 'service384KR': 5, 'service576K': 16, 'serviceV110-384-64K': 52, 'serviceV110-48-64K': 49.

Shows the current state of the current call for the indexed host slot and port. The returned value will indicates the same state displayed in a call status window for the port. Enumeration: 'handshake': 6, 'bertSlav': 12, 'ringing': 14, 'clearing': 4, 'answering': 2, 'setupAdd': 15, 'setupRem': 17, 'loopSlav': 10, 'calling': 3, 'idle': 7, 'other': 1, 'bertMast': 11, 'online': 8, 'localLoop': 5, 'setupHnd': 16, 'loopMast': 9, 'remoteMg': 13.

The value displayed on the 4th line of the call status menu. When the hostStatusCallType is aim( 1 ) this value is the name of the host port on the far end of a connection, or the far-end system name if the host port has not been named. An empty string is returned when there is no call active or when aim( 1 ) is not being used.

The number of channels in use by the call as displayed on the third line of the call status menu for the indexed slot and port.

The duration of the call associated with the indexed host slot and port, measured in seconds.

The number of consoles supported by this device.

A list of console entries.

An entry containing objects that describe the indexed console port.

A unique value for each console. It's value ranges between 1 and the value consoleNumber. This is the index into the console table to identify a particular console.

The interface number associated with the indexed console. This number can be used to index into the interface (and other) tables to obtain detailed console status.

The type of console in the indexed entry. When no console is plugged into a console port the value inactive(5) is returned. The value remote(6) indicates a console initiated via remote management or TELNET session. Enumeration: 'remote': 6, 'primary': 2, 'inactive': 5, 'other': 1, 'palmtop': 4, 'secondary': 3.

The security profile, in the range of 1 through the number of profiles supported by the unit, of the indexed console. The default security profile is profile number 1. Note: This attribute is supported on non-TNT platforms only.

A reference to MIB definitions specific to the console port. Contains the object identifier { 0 0 } if there is no console specific information for the indexed console.

The time system startup up in seconds since January 1, 1990. This value in concert with 'sysSecsSinceStartup' below can be used to compute the current time in seconds since 1/1/90.

The number of seconds since system startup.

Version number of this private MIB. Versions numbers start at 1 and increment by 1 for every major revision. Major revisions are additions/deletions to this MIB.

Value represents the minor revision number of this MIB. Minor revision numbers start at 0 and increment by 1 for each revision. Minor revisions are textual or comment changes.

This variable instructs the system to perform the specified tftp operation. Note: loadCode( 6 ) is not supported on TNT platform. Enumeration: 'restore': 2, 'saveAll': 3, 'loadCode': 6, 'saveMib': 4, 'saveExcProf': 8, 'saveAllMib': 5, 'save': 1, 'saveIncProf': 7.

This variable indicates the status of a save or restore operation through tftp. Enumeration: 'notFound': 2, 'unrecoverable': 13, 'busy': 10, 'ok': 1, 'timeout': 12, 'exists': 7, 'badOp': 5, 'tooManyRetries': 14, 'noResources': 11, 'openFile': 16, 'noSpace': 4, 'access': 3, 'noSuchUser': 8, 'badTid': 6, 'createFile': 15, 'inProgress': 17, 'parameter': 9.

This variable indicates the host address where the configuration file is saved to or restored from through tftp.

This variable indicates the file name of the configuration file to save to or restore from a SNMP host through tftp.

This variable indicates the port # to use when starting a TSAVE TRESTORE command. Normally this would be port 69, but we need to allow the Java Console to override this in case the Console workstation has a TFTP server already running.

This variable indicates the list of profiles to be included or excluded during the save operation through tftp. The snmp agent will modify the set string to an uppercase space-separated new string and return the changed value. This is to clarify the case insensitive profile naming.

This variable instructs the system to re-read its RADIUS configuration. This variable will return a general error if RADIUS is not configured or if sysConfigRadiusStatus has a value of processing(2). Enumeration: 'all': 1, 'source': 6, 'nailed': 4, 'termsrv': 5, 'pools': 3, 'routes': 2.

This variable indicates the status of the last RADIUS configuration retrieval. This includes the boot time retrieval. Enumeration: 'init': 1, 'processing': 2, 'complete': 5, 'timeout': 3, 'error': 4.

The current system time in seconds since January 1, 1990. Changing this value may result in a change of sysAbsoluteStartupTime and not of sysSecsSinceStartup. The following relationship holds: sysAbsoluteCurrentTime - sysAbsoluteStartupTime = sysSecsSinceStartup.

The reset takes effect after 1 minute. Enumeration: 'reset': 2, 'no-op': 1.

The name of the load which is currently running.

An incoming call can be authenticated using a local profile or one from an authentication server such as RADIUS or TACACS. local-first means authenticate from a local profile first, and if that fails, try the authentication server. remote-first means get a profile from the authentication server and authenticate from that and if that fails, try to authenticate from a local profile. remote-no is the same as remote-first except if the external authentication server NACKs the request, then the connection will be denied, i.e. no search of the local profiles will be made. Enumeration: 'remote-no': 4, 'remote-first': 3, 'local-first': 2, 'no-op': 1.

The serial number as stored in the security PROM. The same value is also returned as part of sysName.

The various bit positions are: (2 ** 0) - rs366Enabled (2 ** 1) - dChannelEnabled (2 ** 2) - autoDBAEnabled (2 ** 3) - bondingEnabled (2 ** 4) - aimEnabled (2 ** 5) - v25bisEnabled (2 ** 6) - x21Enabled (2 ** 7) - switchedEnabled (2 ** 8) - mrateEnabled (2 ** 9) - pbxEnabled (2 ** 10) - pcbusEnabled (2 ** 11) - bridgingEnabled (2 ** 12) - pipeHxEnabled (2 ** 13) - frameRelayEnabled (2 ** 14) - maxLinkClientEnabled (2 ** 15) - dataCallEnabled (2 ** 16) - dualSlotT1Enabled (2 ** 17) - r2SignalingEnabled (2 ** 18) - domesticEnabled (2 ** 19) - modemTSDialoutEnabled (2 ** 20) - pipePxEnabled (2 ** 21) - firewallsEnabled (2 ** 22) - serialPortT1_CSU_Enabled (2 ** 23) - pipePotsEnabled (2 ** 24) - forceMultibandPlatformSimulationEnabled (2 ** 25) - k56SlotCardOnlyEnabled (2 ** 26) - networkManagementEnabled (2 ** 27) - advancedAgentEnabled (DEPRECATED) (2 ** 28) - phsSupportEnabled (2 ** 29) - selectoolsEnabled (2 ** 30) - routingProtocolsDisabled (2 ** 31) - tunnelProtocolsDisabled (DEPRECATED).

The various bit positions are: (2 ** 0) - atmpEnabled (2 ** 1) - l2tpEnabled (2 ** 2) - pptpEnabled (2 ** 3) - l2fEnabled (2 ** 4) - ipinipEnabled (2 ** 5) - vRouterEnabled (2 ** 6) - aodiEnabled (2 ** 7) - maddModemEnabled (2 ** 8) - madd96DevicesEnabled (2 ** 9) - maddHdlcEnabled (2 ** 10) - v110Enabled (2 ** 11) - sdtnEnabled (2 ** 12) - restrictDSLTermEnabled (2 ** 13) - megamaxEnabled (2 ** 14) - maxtapEnabled (2 ** 15) - phs21Enabled (2 ** 16) - atmSvcEnabled (2 ** 17) - frVcEnabled (2 ** 18) - networkManagementVoipEnabled (2 ** 19) - networkManagementPlusEnabled (2 ** 20) - networkManagementPlusVoipEnabled

The various bit positions are: (2 ** 0) - FranceIsdn (2 ** 1) - UKIsdn (2 ** 2) - BelgiumIsdn (2 ** 3) - JapanIsdn (2 ** 4) - AustraliaIsdn (2 ** 5) - GermanIsdn (2 ** 6) - UKDpnss (2 ** 7) - SwissIsdn (2 ** 8) - GloBandIsdn

Clear Ethernet statistics.

Clear specified interface's WAN statistics.

Clear all WAN statistics.

The error code for the previous box restart. The error codes are identical to ones obtained via fatal-history from the debug monitor screen. Enumeration: 'warningBadPowerSupply': 400, 'fatalIDECTimeout': 34, 'warningPrimaryHWsetupFailed': 2100, 'warningBufferBadMemAlloc': 105, 'fatalLif': 5, 'warningEthernetWaitScb': 1006, 'warningLCDAllocFailure': 145, 'fatalLinkedListCorruption': 55, 'warningSpyderDesc': 186, 'fatalX25Init': 24, 'fatalExecNoTask': 12, 'warningBufferMemcpyMagicNext': 121, 'warningBadChunk': 135, 'fatalDDDDead': 21, 'warningNoTimers': 140, 'warningLmodSlotDown': 195, 'warningSauthBadAddr': 321, 'warningBufferMemcpyMagic': 120, 'warningUnalignedAccess': 800, 'warningBufferTooBig': 111, 'fatalClipping': 41, 'warningBufferTrailerBuffer': 115, 'fatalZeroMemoryAlloc': 27, 'fatalNoPriority2Task': 39, 'fatalTaskLoop': 29, 'warningCidrWrongTree': 310, 'warningBufferWriteAfterFree': 118, 'warningFlashTypeBad': 2010, 'warningCidrNonempty': 313, 'fatalReadyHangFault': 42, 'infoCardBounced': 220, 'warningBufferNull': 112, 'warningBufferTrailerLength': 116, 'warningTermSrvState': 160, 'warningIpxsapFilterCountZero': 3002, 'warningBufferInUse': 101, 'fatalBadPower': 60, 'fatalDspUnUsed': 20, 'warningMemcpyWrongMagic': 152, 'warningDspWrongSlot': 768, 'warningBufferNotInUse': 119, 'warningMemcpyTooLarge': 150, 'warningBaeepromImageMismatch': 2002, 'warningLmodDspDown': 196, 'fatalMemcpyWrongMagic': 32, 'warningInFilterList': 381, 'fatalX25Stack': 25, 'fatalExecWaitInCtricalSection': 15, 'warningUnexpectedIF': 136, 'errprPPPAsuncBufferInUse': 130, 'warningTcpTooMuchData': 192, 'warningH323NoResources': 801, 'warningNewCallNoDiscRequest': 182, 'fatalExecNoMailPoll': 11, 'warningCidrBusy': 312, 'fatalExcessPostCompl': 43, 'warningHscxSlowRelay': 188, 'fatalProfileBad': 3, 'warningBufferWrongPool': 102, 'warningTermSrvSemaphore': 161, 'warningMemcpyBadStart': 153, 'unknown': 9999, 'warningEthernetReset': 1003, 'warningGdbProtectionFault': 330, 'warningTacacsplusPointerInconsistency': 301, 'warningOspfWarn': 201, 'warningChannelMapStuck': 180, 'warningEthernetCuBusy': 1001, 'warningExecNoMailbox': 177, 'fatalLcdError': 6, 'warningSTACTimeout': 170, 'warningTcpTooMuchWrite': 193, 'warningIpxsapFilterCountMismatch': 3003, 'warningUnexpected': 179, 'warningExecNoResources': 178, 'fatalMemcoyBadStart': 33, 'fatalWatchdogTimeout': 61, 'warningBufferTrailerMagic': 114, 'infoCardDown': 221, 'fatalWriteProtect': 44, 'warningBufferWrongHeap': 103, 'warningOspfFatal': 200, 'warningSTACDataNotOwned': 171, 'fatalX25Buffers': 23, 'warningBufferTrailerUserMagic': 117, 'fatalSystemUp': 100, 'fatalDDDProtocolError': 22, 'fatalStackOverflow': 36, 'warningTacacsplusMax': 309, 'warningSauthWrongInfo': 320, 'warningNewCallNoDiscResp': 183, 'fatalProtectionFault': 40, 'warningEthernetAckFailure': 1002, 'warningBufferSegmentCountZero': 113, 'warningSpyderBuffer': 185, 'fatalATMSVC': 46, 'fatalMbufPanic': 38, 'warningDspCrashMax': 767, 'warningEthernetNoTxBuf': 550, 'warningModemTxChannelRecovered': 4100, 'warningTcpBadOptions': 194, 'warningModemTxChannelStuck': 4000, 'warningSecondaryHWsetupFailed': 2101, 'warningBriJumperNotPresent': 210, 'warningTacacsplusBase': 300, 'warningBaeepromChange': 2001, 'warningExecFailure': 175, 'warningTacacsplusTcpInconsistency': 303, 'fatalIsacTimeout': 7, 'fatalDRAMCard': 37, 'warningBriJumperConfiguration': 211, 'warningMismatchCountFilterList': 383, 'warningDspCrashMin': 512, 'fatalOperatorReset': 99, 'warningSpyderLoseChannel': 187, 'fatalDspLossOfSync': 19, 'fatalSwitchTypeBad': 4, 'warningTelnetFreeDrv': 165, 'fatalNegativeMemoryAllocate': 28, 'warningBufferBogusHeap': 107, 'warningBufferBoundary': 110, 'infoSystemResetOccurred': 385, 'fatalExecNoTimer': 13, 'warningDisconnectRequestDropped': 184, 'warningCidrDupDelete': 314, 'fatalDspDead': 16, 'fatalInterruptCode': 48, 'warningTacacsplusSocketMismatch': 305, 'warningWANBufferLeak': 154, 'warningBufferBogusPool': 106, 'warningTacacsplusIndexInconsistency': 302, 'warningCdtUnprotectedAccess': 384, 'fatalUnexplainedNMI': 62, 'warningEthernetNoMACAddress': 1007, 'warningTcpXmitLooping': 198, 'warningLmodDspmodemDown': 197, 'warningBufferNoExtraDRAM': 129, 'warningIpcpIpLookup': 131, 'fatalPoolsNoBuffer': 2, 'fatalExecInvalidSwitch': 9, 'fatalMemcpyTooLarge': 30, 'notApplicable': 9998, 'warningCidrNoMem': 311, 'warningTcpSequenceGap': 191, 'warningExecRestricted': 999, 'warningIpxsapFilterMagic': 3001, 'fatalExecNoMailDesc': 10, 'warningTacacsplusUnexpectedAuthState': 306, 'warningMaxiopLoadFailure': 2022, 'fatalMemcpyNoMagic': 31, 'fatalSCCSpuriousInterrupt': 8, 'warningNoCountInFilterList': 382, 'warningTacacsplusTcpOutofrangesocket': 304, 'fatalExecRestricted': 35, 'warningTcpSbcontTooBig': 190, 'fatalDspInternalError': 18, 'fatalFRSVC': 47, 'warningEthernetCuActive': 1005, 'fatalDspProtocolError': 17, 'fatalAssert': 1, 'warningBufferNegativeMemalloc': 108, 'warningChannelDisplayStuck': 181, 'warningLCDNonSense': 146, 'warningBufferNotMemAlloc': 104, 'fataExecNoTimerPool': 14, 'fatalPrimarySelected': 98, 'warningBufferZeroMemalloc': 109, 'fatalPureVirtual': 45, 'warningMemcpyNoMagic': 151.

The name and security index (if available) of the user who changed the configuration.

This variable instructs the system to copy the stored code image from PCMCIA flash to internal flash or vice versa. Enumeration: 'copyPCMCIAtoInternal': 1, 'copyInternalToPCMCIA': 2.

This variable indicates the status of a flash image copy. Enumeration: 'failed': 3, 'inProgress': 2, 'ok': 1.

The code version stored on the internal flash.

The code version stored on the PCMCIA flash.

A list of the most recent Fatal Log entries of the system as well as the included slot cards

Definition of the row entries in the Fatal Log Table

Dynamic index that reflects the index used in the Fatal LOG table, starting with the most oldest event.

An index into the slotTable This has the same value as slotIndex, it is set to 0 for systems with one logical slot card.

The version of the software running, when this entry was created by the system.

The user responsible for reseting the card. This will be set to the empty string if unknown.

The name of the Load executing on the card, it gives a textual description of the software code that was running on the system when the entry was created.

The IP address from which a manual system reset was triggered.

The reason for reset as reported by the system. For a more detailed description consult the user manual. Enumeration: 'warningBadPowerSupply': 400, 'fatalIDECTimeout': 34, 'warningPrimaryHWsetupFailed': 2100, 'warningBufferBadMemAlloc': 105, 'fatalLif': 5, 'warningEthernetWaitScb': 1006, 'warningLCDAllocFailure': 145, 'fatalLinkedListCorruption': 55, 'warningSpyderDesc': 186, 'fatalX25Init': 24, 'fatalExecNoTask': 12, 'warningBufferMemcpyMagicNext': 121, 'warningBadChunk': 135, 'fatalDDDDead': 21, 'warningNoTimers': 140, 'warningLmodSlotDown': 195, 'warningSauthBadAddr': 321, 'warningBufferMemcpyMagic': 120, 'warningUnalignedAccess': 800, 'warningBufferTooBig': 111, 'fatalClipping': 41, 'warningBufferTrailerBuffer': 115, 'fatalZeroMemoryAlloc': 27, 'fatalNoPriority2Task': 39, 'fatalTaskLoop': 29, 'warningCidrWrongTree': 310, 'warningBufferWriteAfterFree': 118, 'warningFlashTypeBad': 2010, 'warningCidrNonempty': 313, 'fatalReadyHangFault': 42, 'infoCardBounced': 220, 'warningBufferNull': 112, 'warningBufferTrailerLength': 116, 'warningTermSrvState': 160, 'warningIpxsapFilterCountZero': 3002, 'warningBufferInUse': 101, 'fatalBadPower': 60, 'fatalDspUnUsed': 20, 'warningMemcpyWrongMagic': 152, 'warningDspWrongSlot': 768, 'warningBufferNotInUse': 119, 'warningMemcpyTooLarge': 150, 'warningBaeepromImageMismatch': 2002, 'warningLmodDspDown': 196, 'fatalMemcpyWrongMagic': 32, 'warningInFilterList': 381, 'fatalX25Stack': 25, 'fatalExecWaitInCtricalSection': 15, 'warningUnexpectedIF': 136, 'errprPPPAsuncBufferInUse': 130, 'warningTcpTooMuchData': 192, 'warningH323NoResources': 801, 'warningNewCallNoDiscRequest': 182, 'fatalExecNoMailPoll': 11, 'warningCidrBusy': 312, 'fatalExcessPostCompl': 43, 'warningHscxSlowRelay': 188, 'fatalProfileBad': 3, 'warningBufferWrongPool': 102, 'warningTermSrvSemaphore': 161, 'warningMemcpyBadStart': 153, 'unknown': 9999, 'warningEthernetReset': 1003, 'warningGdbProtectionFault': 330, 'warningTacacsplusPointerInconsistency': 301, 'warningOspfWarn': 201, 'warningChannelMapStuck': 180, 'warningEthernetCuBusy': 1001, 'warningExecNoMailbox': 177, 'fatalLcdError': 6, 'warningSTACTimeout': 170, 'warningTcpTooMuchWrite': 193, 'warningIpxsapFilterCountMismatch': 3003, 'warningUnexpected': 179, 'warningExecNoResources': 178, 'fatalMemcoyBadStart': 33, 'fatalWatchdogTimeout': 61, 'warningBufferTrailerMagic': 114, 'infoCardDown': 221, 'fatalWriteProtect': 44, 'warningBufferWrongHeap': 103, 'warningOspfFatal': 200, 'warningSTACDataNotOwned': 171, 'fatalX25Buffers': 23, 'warningBufferTrailerUserMagic': 117, 'fatalSystemUp': 100, 'fatalDDDProtocolError': 22, 'fatalStackOverflow': 36, 'warningTacacsplusMax': 309, 'warningSauthWrongInfo': 320, 'warningNewCallNoDiscResp': 183, 'fatalProtectionFault': 40, 'warningEthernetAckFailure': 1002, 'warningBufferSegmentCountZero': 113, 'warningSpyderBuffer': 185, 'fatalATMSVC': 46, 'fatalMbufPanic': 38, 'warningDspCrashMax': 767, 'warningEthernetNoTxBuf': 550, 'warningModemTxChannelRecovered': 4100, 'warningTcpBadOptions': 194, 'warningModemTxChannelStuck': 4000, 'warningSecondaryHWsetupFailed': 2101, 'warningBriJumperNotPresent': 210, 'warningTacacsplusBase': 300, 'warningBaeepromChange': 2001, 'warningExecFailure': 175, 'warningTacacsplusTcpInconsistency': 303, 'fatalIsacTimeout': 7, 'fatalDRAMCard': 37, 'warningBriJumperConfiguration': 211, 'warningMismatchCountFilterList': 383, 'warningDspCrashMin': 512, 'fatalOperatorReset': 99, 'warningSpyderLoseChannel': 187, 'fatalDspLossOfSync': 19, 'fatalSwitchTypeBad': 4, 'warningTelnetFreeDrv': 165, 'fatalNegativeMemoryAllocate': 28, 'warningBufferBogusHeap': 107, 'warningBufferBoundary': 110, 'infoSystemResetOccurred': 385, 'fatalExecNoTimer': 13, 'warningDisconnectRequestDropped': 184, 'warningCidrDupDelete': 314, 'fatalDspDead': 16, 'fatalInterruptCode': 48, 'warningTacacsplusSocketMismatch': 305, 'warningWANBufferLeak': 154, 'warningBufferBogusPool': 106, 'warningTacacsplusIndexInconsistency': 302, 'warningCdtUnprotectedAccess': 384, 'fatalUnexplainedNMI': 62, 'warningEthernetNoMACAddress': 1007, 'warningTcpXmitLooping': 198, 'warningLmodDspmodemDown': 197, 'warningBufferNoExtraDRAM': 129, 'warningIpcpIpLookup': 131, 'fatalPoolsNoBuffer': 2, 'fatalExecInvalidSwitch': 9, 'fatalMemcpyTooLarge': 30, 'notApplicable': 9998, 'warningCidrNoMem': 311, 'warningTcpSequenceGap': 191, 'warningExecRestricted': 999, 'warningIpxsapFilterMagic': 3001, 'fatalExecNoMailDesc': 10, 'warningTacacsplusUnexpectedAuthState': 306, 'warningMaxiopLoadFailure': 2022, 'fatalMemcpyNoMagic': 31, 'fatalSCCSpuriousInterrupt': 8, 'warningNoCountInFilterList': 382, 'warningTacacsplusTcpOutofrangesocket': 304, 'fatalExecRestricted': 35, 'warningTcpSbcontTooBig': 190, 'fatalDspInternalError': 18, 'fatalFRSVC': 47, 'warningEthernetCuActive': 1005, 'fatalDspProtocolError': 17, 'fatalAssert': 1, 'warningBufferNegativeMemalloc': 108, 'warningChannelDisplayStuck': 181, 'warningLCDNonSense': 146, 'warningBufferNotMemAlloc': 104, 'fataExecNoTimerPool': 14, 'fatalPrimarySelected': 98, 'warningBufferZeroMemalloc': 109, 'fatalPureVirtual': 45, 'warningMemcpyNoMagic': 151.

The time at which the system was reset.