ASCEND-MIBSHDSLSTAT-MIB: View SNMP OID List / Download MIB

A list of mibshdslDslLineStatus profile entries.

A mibshdslDslLineStatus entry containing objects that maps to the parameters of mibshdslDslLineStatus profile.

The number of the shelf that the addressed physical device resides on. Enumeration: 'anyShelf': 1, 'shelf2': 3, 'shelf3': 4, 'shelf1': 2, 'shelf6': 7, 'shelf7': 8, 'shelf4': 5, 'shelf5': 6, 'shelf8': 9, 'shelf9': 10.

The number of the slot that the addressed physical device resides on. Enumeration: 'aLim': 55, 'bLim': 56, 'trunkModule2': 46, 'slot36': 37, 'firstControlModule': 53, 'trunkModule1': 45, 'rightController': 50, 'slot28': 29, 'slot29': 30, 'slot24': 25, 'slot25': 26, 'slot26': 27, 'slot27': 28, 'slot20': 21, 'slot21': 22, 'slot22': 23, 'slot23': 24, 'slotPrimary': 59, 'cLim': 57, 'slot40': 41, 'secondControlModule': 54, 'leftController': 49, 'slot39': 40, 'controlModule': 51, 'slot9': 10, 'slot8': 9, 'controller': 42, 'slot38': 39, 'slot1': 2, 'slot3': 4, 'slot2': 3, 'slot5': 6, 'slot4': 5, 'slot7': 8, 'slot6': 7, 'slot11': 12, 'slot10': 11, 'slot13': 14, 'slot12': 13, 'slot15': 16, 'slot14': 15, 'slot17': 18, 'slot16': 17, 'slot19': 20, 'slot18': 19, 'slot31': 32, 'slot30': 31, 'slot37': 38, 'anySlot': 1, 'slot35': 36, 'slot34': 35, 'slot33': 34, 'dLim': 58, 'slot32': 33.

A number that specifies an addressable entity within the context of shelf and slot.

The overall state of the line. Enumeration: 'disabled': 2, 'active': 3, 'doesNotExist': 1.

The number of the shelf that the addressed physical device resides on. Enumeration: 'anyShelf': 1, 'shelf2': 3, 'shelf3': 4, 'shelf1': 2, 'shelf6': 7, 'shelf7': 8, 'shelf4': 5, 'shelf5': 6, 'shelf8': 9, 'shelf9': 10.

The number of the slot that the addressed physical device resides on. Enumeration: 'aLim': 55, 'bLim': 56, 'trunkModule2': 46, 'slot36': 37, 'firstControlModule': 53, 'trunkModule1': 45, 'rightController': 50, 'slot28': 29, 'slot29': 30, 'slot24': 25, 'slot25': 26, 'slot26': 27, 'slot27': 28, 'slot20': 21, 'slot21': 22, 'slot22': 23, 'slot23': 24, 'slotPrimary': 59, 'cLim': 57, 'slot40': 41, 'secondControlModule': 54, 'leftController': 49, 'slot39': 40, 'controlModule': 51, 'slot9': 10, 'slot8': 9, 'controller': 42, 'slot38': 39, 'slot1': 2, 'slot3': 4, 'slot2': 3, 'slot5': 6, 'slot4': 5, 'slot7': 8, 'slot6': 7, 'slot11': 12, 'slot10': 11, 'slot13': 14, 'slot12': 13, 'slot15': 16, 'slot14': 15, 'slot17': 18, 'slot16': 17, 'slot19': 20, 'slot18': 19, 'slot31': 32, 'slot30': 31, 'slot37': 38, 'anySlot': 1, 'slot35': 36, 'slot34': 35, 'slot33': 34, 'dLim': 58, 'slot32': 33.

A number that specifies an addressable entity within the context of shelf and slot.

The sparing state of the line. Enumeration: 'sparingNone': 1, 'secondaryActive': 4, 'secondaryInactive': 5, 'primaryActive': 2, 'primaryInactive': 3.

The reson for the last sparing state change. Enumeration: 'test': 4, 'unknown': 1, 'manual': 2, 'automatic': 3.

The time of the last sparing state change.

The number of sparing state changes.

The valid range of vpi and vci for the circuits established for the line. This range can change only after LIM reboot. Enumeration: 'vpi03Vci32511': 1, 'notApplicable': 5, 'vpi031Vci3263': 4, 'vpi01Vci321023': 6, 'vpi015Vci32127': 3, 'vpi07Vci32255': 2.

VPI to be used for the VP switching. Rest of the VPIs will be used for the VC switching.

Interface groups index assigned to this physical port.

Unit types defines if the node is operating Central Office or Customer Premise equipment software. Enumeration: 'coe': 1, 'cpe': 2.

Interface type defines if the node is operating on SHDSL or GSHDSL Enumeration: 'default': 1, 'hdsl2': 3, 'gShdsl': 2.

Display of current interface state. Enumeration: 'startupDownload': 6, 'outOfService': 9, 'digitalLoopback': 12, 'startupHandshake': 4, 'unknown': 10, 'portUp': 2, 'down': 8, 'idle': 7, 'analogLoopback': 11, 'test': 3, 'startupTraining': 5.

Operational up and down stream rate. Zero means unknown.

Firmware version ID.

Hardware chip version.

Number of days that the DSL line has been up.

Number of hours that the DSL line has been up.

Number of minutes that the DSL line has been up.

State if the receive signal is present or not. Enumeration: 'yes': 3, 'no': 2.

While the port is in the up state, this parameter displays the line quality.

Interface Up Down counter value displays the number of times the interface trasitions from a down to up state.

Hardware/firmware self test results. Enumeration: 'localLoopBackFailed': 3, 'passed': 1, 'selfTestFailed': 2.

Transmit power in DB.

Framer sync status Enumeration: 'inSync': 2, 'outOfSync': 1.

Line is defined as a count of SHDSL CRC anomalies occuring during the accumuation period.

Errored second is defined as a count of 1 second intervals during which one or more CRC anomalies are declaired and/or one or more LOSW defects are declared.

Line is defined as a count of 1 second intervals for during which at least 50 CRC anomalies are declared or one or more LOSW defects are declared.

Line is defined as a count of 1 second intervals during which one or more SHDSL LOSW defects are declared.

Line is a count of 1 second intervals for which the SHDSL line is unavailable. The SHDSL line becomes unavailable at the onset of 10 contiguous SES-L's. Once unavailable the SHDSL line becomes available at the onset of 10 contiguous seconds with no SES-L's.

Current loop attenuation in DB.

Enumeration: 'deleteProfile': 3, 'createProfile': 2, 'noAction': 1.

While the port is in the up state, this parameter displays the Signal to Noise Ratio.

Current loop attenuation in DB from the STU-R.

While the port is in the up state, this parameter displays the Signal to Noise Ratio from the STU-R.

Current Standard Network type. Either Annex A, Annex B or Annex B ANFP. Enumeration: 'yes': 2, 'no': 1.