ALCATEL-IND1-DHCPV6-MIB: View SNMP OID List / Download MIB

VENDOR: ALCATEL


 Home MIB: ALCATEL-IND1-DHCPV6-MIB
Download as:   
SNMPv2-CONF, ALCATEL-IND1-BASE, IPV6-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC, IPV6-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 alcatelIND1DHCPv6MIB 1.3.6.1.4.1.6486.801.1.2.1.29.2
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Propietary DHCPv6 MIB definitions The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
     alcatelIND1DHCPv6MIBNotifications 1.3.6.1.4.1.6486.801.1.2.1.29.2.0
         alaDHCPv6SrvLeaseUtilizationThresholdTrap 1.3.6.1.4.1.6486.801.1.2.1.29.2.0.1
When the lease utilization in a subnet exceeds or deceeds threshold value set by the application, a notification is sent to the Management Entity, with the DHCPv6 Server lease utilization information.
     alcatelIND1DHCPv6MIBObjects 1.3.6.1.4.1.6486.801.1.2.1.29.2.1
         alaDHCPv6RelayConfig 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.1
             alaDHCPv6RelayAdminStatus 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.1.1 integer read-write
Global DHCPv6 administrative status. This object provides a means to globally enable or disable the DHCPv6 relay feature. DHCPv6 Relay must still be enabled on individual interfaces in order for relay operation to occur. Enumeration: 'enable': 1, 'disable': 2.
         alaDHCPv6SrvConfig 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.2
             alaDHCPv6SrvGlobalConfigStatus 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.2.1 integer read-write
This object is used to enable(1) or disable(2) DHCPv6 Server on the switch. Enumeration: 'enable': 1, 'disable': 2.
             alaDHCPv6SrvGlobalRestart 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.2.2 integer read-write
This object is used to restart(2) the DHCPv6 Server on the switch. Default value is inactive(1) which user can not set. Enumeration: 'inactive': 1, 'restart': 2.
             alaDHCPv6SrvGlobalClearStat 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.2.3 integer read-write
Defines the global clear statistics control for DHCPv6 Server. default(1) - default value for this object, reset(2) - indicates that all statistic related to DHCPv6 server in the system should get cleared. Enumeration: 'default': 1, 'reset': 2.
         alaDHCPv6RelayInterfaceTable 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.3 no-access
Table controlling DHCPv6 Relay on IPv6 interfaces. This table extends the corresponding IPv6 interface entry in alaIPv6InterfaceTable.
             alaDHCPv6RelayInterfaceEntry 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.3.1 no-access
An DHCPv6 relay interface entry.
                 alaDHCPv6RelayInterfaceAdminStatus 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.3.1.1 integer read-only
DHCPv6 administrative status on the interface. Enumeration: 'enable': 1, 'disable': 2.
         alaDHCPv6RelayDestinationTable 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.4 no-access
Table allowing the creation and removal of DHCPv6 Relay destinations for an interface.
             alaDHCPv6RelayDestinationEntry 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.4.1 no-access
A DHCPv6 relay destination entry.
                 alaDHCPv6RelayDestinationAddressType 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.4.1.1 inetaddresstype no-access
The address type of a DHCPv6 relay destination. Only ipv6(2) or ipv6z(4) are allowed.
                 alaDHCPv6RelayDestinationAddress 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.4.1.2 inetaddress no-access
The IPv6 address of a DHCPv6 relay destination.
                 alaDHCPv6RelayDestinationRowStatus 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.4.1.3 rowstatus read-only
Used to control the addition and removal of DHCPv6 relay destinations.
         alaDHCPv6SrvLease 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5
             alaDHCPv6SrvLeaseTable 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1 no-access
DHCPv6 server lease table.
                 alaDHCPv6SrvLeaseEntry 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1.1 no-access
DHCPv6 server lease entry.
                     alaDHCPv6SrvLeaseIpv6Address 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1.1.1 ipv6address no-access
IPv6 address assigned to the client
                     alaDHCPv6SrvLeaseLeaseGrant 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1.1.2 dateandtime read-only
Lease granted time for the client.
                     alaDHCPv6SrvLeasePrefLeaseExpiry 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1.1.3 dateandtime read-only
Preferred Lease expiry of the client.
                     alaDHCPv6SrvLeaseValidLeaseExpiry 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1.1.4 dateandtime read-only
Valid Lease expiry of the client.
                     alaDHCPv6SrvLeaseType 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.5.1.1.5 integer read-only
Type of the lease. Enumeration: 'manual': 3, 'dynamic': 2, 'unavailable': 1.
         alaDHCPv6SrvTrapsObj 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.6
             alaDHCPv6SrvLeaseThresholdStatus 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.6.1 integer no-access
This object specifies the threshold status of subnet utilization. Enumeration: 'crossedAbove80Threshold': 2, 'crossedBelow80Threshold': 1, 'reached100Threshold': 3.
             alaDHCPv6SrvSubnetDescriptor 1.3.6.1.4.1.6486.801.1.2.1.29.2.1.6.2 displaystring no-access
This object specifies the subnet Descriptor. Denotes the IPv6 address
     alcatelIND1DHCPv6MIBConformance 1.3.6.1.4.1.6486.801.1.2.1.29.2.2
         alcatelIND1DHCPv6MIBCompliances 1.3.6.1.4.1.6486.801.1.2.1.29.2.2.1
             alaDHCPv6Compliance 1.3.6.1.4.1.6486.801.1.2.1.29.2.2.1.1
The compliance statement for switches implementing ALCATEL-IND1-DHCPV6-MIB.
         alcatelIND1DHCPv6MIBGroups 1.3.6.1.4.1.6486.801.1.2.1.29.2.2.2
             alaDHCPv6RelayGroup 1.3.6.1.4.1.6486.801.1.2.1.29.2.2.2.1
A collection of objects to support management of DHCPv6 Relay.
             alaDHCPv6SrvGroup 1.3.6.1.4.1.6486.801.1.2.1.29.2.2.2.2
A collection of objects to support management of DHCPv6 server.
             alaDHCPv6SrvNotificationsGroup 1.3.6.1.4.1.6486.801.1.2.1.29.2.2.2.3
Notifications for DHCPv6 server.
             alaDHCPv6SrvLeaseUtilizationThresholdGroup 1.3.6.1.4.1.6486.801.1.2.1.29.2.2.2.4
When the lease utilization in a subnet exceeds or deceeds threshold value set by the application, a notification is sent to the Management Entity, with the DHCPv6 Server lease utilization information.