ACC-SMDS: View SNMP OID List / Download MIB

VENDOR: ACC


 Home MIB: ACC-SMDS
Download as:   
ACC-MIB, RFC-1215, ACC-SYSTEM, RFC1155-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 accSMDS 1.3.6.1.4.1.5.1.1.26
       accSmdsPortTable 1.3.6.1.4.1.5.1.1.26.1
This table contains SMDS port parameters and state variables, one entry per SMDS port.
           accSmdsPortEntry 1.3.6.1.4.1.5.1.1.26.1.1
This list contains SMDS port parameters and state variables.
               accSmdsPortIndex 1.3.6.1.4.1.5.1.1.26.1.1.1
The value of this object identifies the SIP port interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object, defined in RFC 1156 and RFC 1213, for the same interface.
               accSmdsPortIA 1.3.6.1.4.1.5.1.1.26.1.1.2
The value of this object specifies the SNI Individual address configured for this SIP interface port.
               accSmdsPortPollingStatus 1.3.6.1.4.1.5.1.1.26.1.1.3
The administrative status of heartbeat polling for this SMDS port. ON enables the generation of heartbeat polls, and OFF disables it. Note: the status of this object does not affect the response to heartbeat polls received. We always respond to polls received.
       accSipL3Table 1.3.6.1.4.1.5.1.1.26.2
This table contains SIP L3 parameters and state variables, one entry per SIP port.
           accSipL3Entry 1.3.6.1.4.1.5.1.1.26.2.1
This list contains SIP L3 parameters and state variables.
               accSipL3Index 1.3.6.1.4.1.5.1.1.26.2.1.1
The value of this object identifies the SIP port interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object, defined in RFC 1156 and RFC 1213, for the same interface.
               accSipL3RcvIAs 1.3.6.1.4.1.5.1.1.26.2.1.2
The total number of individually addressed SIP Level 3 PDUs received from the remote system across the SNI. The total includes only unerrored L3PDUs.
               accSipL3RcvGAs 1.3.6.1.4.1.5.1.1.26.2.1.3
The total number of group addressed SIP Level 3 PDUs received from the remote system across the SNI. The total includes only unerrored L3PDUs.
               accSipL3UnkIAs 1.3.6.1.4.1.5.1.1.26.2.1.4
The number of SIP Level 3 PDUs received from the remote system with invalid or unknown individual destination addresses (Destination Address Screening violations are not included). See SMDS Subscription MIB module.
               accSipL3UnkGAs 1.3.6.1.4.1.5.1.1.26.2.1.5
The number of SIP Level 3 PDUs received from the remote system with invalid or unknown group addresses. (Destination Address Screening violations are not included). See SMDS Subscription MIB module.
               accSipL3SndIAs 1.3.6.1.4.1.5.1.1.26.2.1.6
The number of individually addressed SIP Level 3 PDUs that have been sent by this system across the SNI.
               accSipL3SndGAs 1.3.6.1.4.1.5.1.1.26.2.1.7
The number of group addressed SIP L3PDUs that have been sent by this system across the SNI.
               accSipL3Errors 1.3.6.1.4.1.5.1.1.26.2.1.8
The total number of SIP Level 3 PDUs received from the remote system that were discovered to have errors (including protocol processing and bit errors but excluding addressing-related errors) and were discarded. Includes both group addressed L3PDUs and L3PDUs containing an individual destination address.
               accSipL3InvAddrs 1.3.6.1.4.1.5.1.1.26.2.1.9
The number of SIP Level 3 PDUs received from the remote system that had the Source or Destination Address_Type subfields, (the four most significant bits of the 64 bit address field), not equal to the value 1100 or 1110. Also, an error is considered to have occurred if the Address_Type field for a Source Address, the four most significant bits of the 64 bits, is equal to 1110 (a group address).