ACC-SYSTEM: View SNMP OID List / Download MIB

VENDOR: ACC


 Home MIB: ACC-SYSTEM
Download as:   
ACC-MIB, RFC1155-SMI, RFC-1215

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 accSystem 1.3.6.1.4.1.5.1.1.1
     accSysInfo 1.3.6.1.4.1.5.1.1.1.1
         accUnitName 1.3.6.1.4.1.5.1.1.1.1.1
A printable ASCII string up to 32 octets long that is used to refer to a physical unit. This name is used in the prompt displayed at the maintenance terminal.
         accRomId 1.3.6.1.4.1.5.1.1.1.1.2
A printable ASCII string that contains information about the hardware and the firmware (NOT the software).
         accSwVersion 1.3.6.1.4.1.5.1.1.1.1.3
A printable ASCII string representing the software version number of the running code.
         accReset 1.3.6.1.4.1.5.1.1.1.1.4
A Set command on this object will cause an immediate reset of the unit.
         accMemStatTable 1.3.6.1.4.1.5.1.1.1.1.5
Information about data buffer pools. Instance is pool number. 1 - 7 is D RAM 8 is M RAM 9 - is C RAM 10 - is H RAM
             accMemStatEntry 1.3.6.1.4.1.5.1.1.1.1.5.1
A single entry in the Memory stats table
                 accMemBlkEntSize 1.3.6.1.4.1.5.1.1.1.1.5.1.1
Size (bytes) of these buffers
                 accMemBlkEntTotal 1.3.6.1.4.1.5.1.1.1.1.5.1.2
Total number of these buffers in pool, whether or not they are in use
                 accMemBlkEntMax 1.3.6.1.4.1.5.1.1.1.1.5.1.3
High water mark of usage of buffers
                 accMemBlkEntInUse 1.3.6.1.4.1.5.1.1.1.1.5.1.4
Number of buffers currently in use.
                 accMemBlkEntFails 1.3.6.1.4.1.5.1.1.1.1.5.1.5
Number of times requests were made for a buffer of this size that failed because none were avaliable.
                 accMemBlkEntType 1.3.6.1.4.1.5.1.1.1.1.5.1.6
Numeric classification of the buffer.
                 accMemBlkEntAllocs 1.3.6.1.4.1.5.1.1.1.1.5.1.7
Number of times a request was made for a buffer of this size.
                 accMemBlkEntInitial 1.3.6.1.4.1.5.1.1.1.1.5.1.8
Number of buffers of this size allocated at initialization.
         accNvm 1.3.6.1.4.1.5.1.1.1.1.6
             accNvmTotalBlks 1.3.6.1.4.1.5.1.1.1.1.6.1
Total number of NVM blocks.
             accNvmBlkSize 1.3.6.1.4.1.5.1.1.1.1.6.2
NVM block size in bytes.
             accNvmDirSize 1.3.6.1.4.1.5.1.1.1.1.6.3
The NVM directory size.
             accNvmFreeBlks 1.3.6.1.4.1.5.1.1.1.1.6.4
The number of free NVM blocks.
             accNvmFileNumber 1.3.6.1.4.1.5.1.1.1.1.6.5
The NVM file number.
             accNvmFileName 1.3.6.1.4.1.5.1.1.1.1.6.6
The NVM file name.
             accNvmFileSize 1.3.6.1.4.1.5.1.1.1.1.6.7
The NVM file size in bytes.
         accSysConfigInfo 1.3.6.1.4.1.5.1.1.1.1.7
             accConfiguration 1.3.6.1.4.1.5.1.1.1.1.7.1
Set the action to perform on the active configuration. A set to load or default will immediately reset the unit. On the restart the new configuration (either a previously saved one or the default configuration) will be used.
             accConfigurationStatus 1.3.6.1.4.1.5.1.1.1.1.7.2
The current state of the active configuration. The value changed indicates that the active configuration has changed since the last time it was saved to NVM.
         accScriptHalt 1.3.6.1.4.1.5.1.1.1.1.8
A Set command on this object will cause an immediate halt to any existing configuration script execution.
         accScriptCont 1.3.6.1.4.1.5.1.1.1.1.9
             accScriptContServer 1.3.6.1.4.1.5.1.1.1.1.9.1
The IP address of the server holding the configuration script to be downloaded and executed following the next reset.
             accScriptContFile 1.3.6.1.4.1.5.1.1.1.1.9.2
The filename (with complete pathname) of the configuration script to be downloaded and executed following the next reset.
         accSysUpgradeCmd 1.3.6.1.4.1.5.1.1.1.1.10
On platforms that execute the application from Flash and that support the optional Flash SIMM memory for TFTP upgrades, it indicates the upgrade command (SL or TFTP). If the optional Flash SIMM is not installed, maintenance mode SL command is the only way to upgrade.
         accSysHWType 1.3.6.1.4.1.5.1.1.1.1.11
The hardware platform product name
         accSysProcType 1.3.6.1.4.1.5.1.1.1.1.12
Type of processor on this platform
         accSysLocalRam 1.3.6.1.4.1.5.1.1.1.1.13
The amount of local RAM installed in the system in kilobytes
         accSysGlobalRam 1.3.6.1.4.1.5.1.1.1.1.14
The amount of global RAM installed in the system in kilobytes
         accSysPowerSupply 1.3.6.1.4.1.5.1.1.1.1.15
Type of processor on this platform
         accMemPoolTable 1.3.6.1.4.1.5.1.1.1.1.16
A table of memory pools supported by this unit. Each pool describes a physical memory resource.
               accMemPoolEntry 1.3.6.1.4.1.5.1.1.1.1.16.1
An entry of information about a memory pool.
                   accMemPoolName 1.3.6.1.4.1.5.1.1.1.1.16.1.1
A printable ASCII string describing this memory pool.
                   accMemPoolMaximum 1.3.6.1.4.1.5.1.1.1.1.16.1.2
The maximum amount of memory in this memory pool.
                   accMemPoolBytes 1.3.6.1.4.1.5.1.1.1.1.16.1.3
The amount of memory currently available in this memory pool.
                   accMemPoolFrags 1.3.6.1.4.1.5.1.1.1.1.16.1.4
The number of times this memory pool has been fragmented.
                   accMemPoolAlign 1.3.6.1.4.1.5.1.1.1.1.16.1.5
The alignment this memory pool maintains. For example, a 4 in this field means memory from this pool is aligned on 32-bit boundaries.
                   accMemPoolAllocs 1.3.6.1.4.1.5.1.1.1.1.16.1.6
The number of allocation requests addressed to this memory pool.
                   accMemPoolFails 1.3.6.1.4.1.5.1.1.1.1.16.1.7
The number of times an allocation request addressed to this memory could not be satisfied.
         accMemAddDblk 1.3.6.1.4.1.5.1.1.1.1.17
Number of D blocks added.
         accSlvConfTable 1.3.6.1.4.1.5.1.1.1.1.18
Table of slave CPU configuration parameters.
               accSlvConfEntry 1.3.6.1.4.1.5.1.1.1.1.18.1
A single entry in the slave CPU configuration Table
                   accSlvConfCPUIndex 1.3.6.1.4.1.5.1.1.1.1.18.1.1
Slave CPU Index
                   accSlvConfCPUID 1.3.6.1.4.1.5.1.1.1.1.18.1.2
Slave CPU ID
                   accSlvConfSysDesc 1.3.6.1.4.1.5.1.1.1.1.18.1.3
Slave CPU System Description
                   accSlvConfSWVers 1.3.6.1.4.1.5.1.1.1.1.18.1.4
Slave CPU Software Version
                   accSlvConfProcType 1.3.6.1.4.1.5.1.1.1.1.18.1.5
Slave CPU Processor Type
                   accSlvConfLocalRam 1.3.6.1.4.1.5.1.1.1.1.18.1.6
Slave CPU Local RAM Size (kb)
                   accSlvConfGlobalRam 1.3.6.1.4.1.5.1.1.1.1.18.1.7
Slave CPU Global RAM Size (kb)
         accSlvMemBlkTable 1.3.6.1.4.1.5.1.1.1.1.19
Table of entries in the slave CPU configuration Table.
               accSlvMemBlkEntry 1.3.6.1.4.1.5.1.1.1.1.19.1
A single entry in the slave CPU configuration Table
                   accSlvMemCPUID 1.3.6.1.4.1.5.1.1.1.1.19.1.3
Slave CPU ID
                   accSlvMemBlkEntSize 1.3.6.1.4.1.5.1.1.1.1.19.1.4
Size (bytes) of these buffers
                   accSlvMemBlkEntTotal 1.3.6.1.4.1.5.1.1.1.1.19.1.5
Total number of these buffers in pool, whether or not they are in use
                   accSlvMemBlkEntMax 1.3.6.1.4.1.5.1.1.1.1.19.1.6
High water mark of usage of buffers
                   accSlvMemBlkEntInUse 1.3.6.1.4.1.5.1.1.1.1.19.1.7
Number of buffers currently in use.
                   accSlvMemBlkEntFails 1.3.6.1.4.1.5.1.1.1.1.19.1.8
Number of times requests were made for a buffer of this size that failed because none were avaliable.
                   accSlvMemBlkEntType 1.3.6.1.4.1.5.1.1.1.1.19.1.9
Numeric classification of the buffer.
                   accSlvMemBlkEntAllocs 1.3.6.1.4.1.5.1.1.1.1.19.1.10
Number of times a request was made for a buffer of this size.
         accSlvMemPool 1.3.6.1.4.1.5.1.1.1.1.20
               accSlvMemPoolTable 1.3.6.1.4.1.5.1.1.1.1.20.1
A table of memory pools supported by this unit. Each pool describes a physical memory resource.
                   accSlvMemPoolEntry 1.3.6.1.4.1.5.1.1.1.1.20.1.1
An entry of information about a memory pool.
                       accSlvMemPoolCPUID 1.3.6.1.4.1.5.1.1.1.1.20.1.1.1
Slave CPU ID
                       accSlvMemPoolName 1.3.6.1.4.1.5.1.1.1.1.20.1.1.2
A printable ASCII string describing this memory pool.
                       accSlvMemPoolMaximum 1.3.6.1.4.1.5.1.1.1.1.20.1.1.3
The maximum amount of memory in this memory pool.
                       accSlvMemPoolBytes 1.3.6.1.4.1.5.1.1.1.1.20.1.1.4
The amount of memory currently available in this memory pool.
                       accSlvMemPoolFrags 1.3.6.1.4.1.5.1.1.1.1.20.1.1.5
The number of times this memory pool has been fragmented.
                       accSlvMemPoolAlign 1.3.6.1.4.1.5.1.1.1.1.20.1.1.6
The alignment this memory pool maintains. For example, a 4 in this field means memory from this pool is aligned on 32-bit boundaries.
                       accSlvMemPoolAllocs 1.3.6.1.4.1.5.1.1.1.1.20.1.1.7
The number of allocation requests addressed to this memory pool.
                       accSlvMemPoolFails 1.3.6.1.4.1.5.1.1.1.1.20.1.1.8
The number of times an allocation request addressed to this memory could not be satisfied.
         accSlvSysTable 1.3.6.1.4.1.5.1.1.1.1.21
Information about slave CPU system stats.
               accSlvSysEntry 1.3.6.1.4.1.5.1.1.1.1.21.1
A single entry in the slave CPU system stats table
                   accSlvSysUpTime 1.3.6.1.4.1.5.1.1.1.1.21.1.1
Slave system uptime
                   accSlvSysCpuAvgShort 1.3.6.1.4.1.5.1.1.1.1.21.1.2
Slave system current CPU usage.
                   accSlvSysCpuAvgLong 1.3.6.1.4.1.5.1.1.1.1.21.1.3
Slave system average CPU usage.
         accMem 1.3.6.1.4.1.5.1.1.1.1.22
               accMemDblkIncTable 1.3.6.1.4.1.5.1.1.1.1.22.1
Table of Memory Dblock Increments
                   accMemDblkIncEntry 1.3.6.1.4.1.5.1.1.1.1.22.1.1
A single entry of the Memory Dblock Increment Table
                       accMemDblkIndex 1.3.6.1.4.1.5.1.1.1.1.22.1.1.1
The index of this entry in the Memory Dblock Increment Table
                       accMemDblkSize 1.3.6.1.4.1.5.1.1.1.1.22.1.1.2
The Size of the Dblock for this entry in the Mem Dblock Inc Table
                       accMemDblkIncrement 1.3.6.1.4.1.5.1.1.1.1.22.1.1.3
The User specified Increment of this entry Memory Dblock Increment Table
               accOpt 1.3.6.1.4.1.5.1.1.1.1.22.2
                   accMemEMEStatus 1.3.6.1.4.1.5.1.1.1.1.22.2.1
The Global Memory Optimizer (EME) Status
                   accMemEMEMaxReclMem 1.3.6.1.4.1.5.1.1.1.1.22.2.2
The Maximum Memory in bytes available for Reclaimation by the Memory Optimizer (EME)
                   accMemEMECurReclMem 1.3.6.1.4.1.5.1.1.1.1.22.2.3
The Memory in bytes Reclaimed by the Memory Optimizer (EME)
                   accMemOptTable 1.3.6.1.4.1.5.1.1.1.1.22.2.4
Table of Memory Optimizer
                       accMemOptEntry 1.3.6.1.4.1.5.1.1.1.1.22.2.4.1
A single entry of the Memory Optimizer Table
                           accMemOptimiserFeature 1.3.6.1.4.1.5.1.1.1.1.22.2.4.1.1
The Reclaimable Feature in the Memory Optimizer Table for this entry
                           accMemOptimiserMemory 1.3.6.1.4.1.5.1.1.1.1.22.2.4.1.2
The amount of memory (in bytes) associated with the reclaimable feature under consideration
                           accMemOptimiserPref 1.3.6.1.4.1.5.1.1.1.1.22.2.4.1.3
The Users preference for this Feature
                           accMemOptimiserStatus 1.3.6.1.4.1.5.1.1.1.1.22.2.4.1.4
The Current Status for this Feature
         accMacro 1.3.6.1.4.1.5.1.1.1.1.23
               accMacroExecute 1.3.6.1.4.1.5.1.1.1.1.23.1
Macro Name to Execute
         accSwRegistrationKey 1.3.6.1.4.1.5.1.1.1.1.24
Software Registration key to upgrade software levels.
         accMACAddr 1.3.6.1.4.1.5.1.1.1.1.25
               accSysMACAddrUser 1.3.6.1.4.1.5.1.1.1.1.25.1
MAC address to be used to override rom MAC address. A value of 0 means use the value stored in rom. Any other value, overrides the ROM MAC address.
         accSysMessage 1.3.6.1.4.1.5.1.1.1.1.26
               accSysMsgInfo 1.3.6.1.4.1.5.1.1.1.1.26.1
                   accSysMsgLevel 1.3.6.1.4.1.5.1.1.1.1.26.1.1
The severity level of system message allowed to be generated
                   accWinDefLenNetman 1.3.6.1.4.1.5.1.1.1.1.26.1.2
The session window default length NETMAN
                   accWinDefLenPublic 1.3.6.1.4.1.5.1.1.1.1.26.1.3
The session window default length PUBLIC
                   accWinDefWidNetman 1.3.6.1.4.1.5.1.1.1.1.26.1.4
The session window default width NETMAN
                   accWinDefWidPublic 1.3.6.1.4.1.5.1.1.1.1.26.1.5
The session window default width PUBLIC
               accUserInfo 1.3.6.1.4.1.5.1.1.1.1.26.2
                   accUserTrapMsgEntry 1.3.6.1.4.1.5.1.1.1.1.26.2.1
A message to be sent through an SNMP trap.
         accVirtualPort 1.3.6.1.4.1.5.1.1.1.1.30
               accVirtualPortGeneral 1.3.6.1.4.1.5.1.1.1.1.30.1
                   accVirtualPortCount 1.3.6.1.4.1.5.1.1.1.1.30.1.1
Number of Virtual ports available on the platform
                   accVirtualPortXotCount 1.3.6.1.4.1.5.1.1.1.1.30.1.2
Number of XOT Virtual ports available on the platform
         accSystemGracefulShutdown 1.3.6.1.4.1.5.1.1.1.1.32
               accSystemGracefulShutdownState 1.3.6.1.4.1.5.1.1.1.1.32.1
System Graceful Shutdown state
               accSystemGracefulShutdownTO 1.3.6.1.4.1.5.1.1.1.1.32.2
System graceful shutdown timeout. When Timeout is exceeded, the system will reset automatically
         accSystemAuthGeneral 1.3.6.1.4.1.5.1.1.1.1.33
               accSystemAuthMode 1.3.6.1.4.1.5.1.1.1.1.33.1
System authentication mode
               accSystemAuthAccessPart 1.3.6.1.4.1.5.1.1.1.1.33.2
Access Partn for RADIUS servers
         accSystemAccess 1.3.6.1.4.1.5.1.1.1.1.34
               accPscopeEnable 1.3.6.1.4.1.5.1.1.1.1.34.1
Permits or denies use of built-in packet monitoring functionality (PSCOPE)
               accDBscopeCntl 1.3.6.1.4.1.5.1.1.1.1.34.2
Controls use of built-in debugger functionality (DBSCOPE). Currently non-zero permits full functionality.
     accSessionCtrl 1.3.6.1.4.1.5.1.1.1.2
         accLogin 1.3.6.1.4.1.5.1.1.1.2.1
A read attempt of this object is interpreted as a request for login to the unit. The instance is an ASCII string with the following (case sensitive) format: CommunityString:Password The GetResponse-PDU will return the accUnitName of the unit. A write attempt is interpreted as a request to change the password. A GetNextRequest will not acknowledge the presence of this object.
         accLogout 1.3.6.1.4.1.5.1.1.1.2.2
A read attempt of this object is interpreted as a request for logout to the unit. The instance is an ASCII string with the following format: CommunityString:Password A GetNextRequest will not acknowledge the presence of this object.
         accLoginTimeout 1.3.6.1.4.1.5.1.1.1.2.3
Session inactivity timer. Zero disables timer (no timeout) Default value is zero Range is 0-86400 seconds
     accTrapTable 1.3.6.1.4.1.5.1.1.1.3
A table of systems to which Trap Messages generated by this unit shall be sent. To delete an entry, a SetRequest-PDU for the specific instance of accTrapAddr with a NULL value encoding is used.
         accTrapEntry 1.3.6.1.4.1.5.1.1.1.3.1
A Trap Table entry
             accTrapAddr 1.3.6.1.4.1.5.1.1.1.3.1.1
An IP address to which SNMP traps generated by the unit are sent.
             accTrapSeverity 1.3.6.1.4.1.5.1.1.1.3.1.2
severity level of the traps to be sent ACC products generate enterprise specific traps for which different severity levels from 1 through 7 are assigned. Level 1 refers to Only SNMP traps. Level 2 are specific traps of highest urgency, and thus progressively each level get more verbose. The normal operational level is expected to be 3 or 4. Higher levels (i.e., 5-7) are expected to generate many events which may be helpful in identifying/isolating configuration related problems, but may affect the performance of the unit.
     accClock 1.3.6.1.4.1.5.1.1.1.4
         accDate 1.3.6.1.4.1.5.1.1.1.4.1
The octet string of six bytes representing the date and time has the following format: YYMMDDHHMMSS where the valid range of values for each of the bytes is as follows: YY 0..99 MM 1..12 DD 1..31 HH 0..23 MM 0..59 SS 0..59
         accUToffset 1.3.6.1.4.1.5.1.1.1.4.2
3-byte date string, HH MM SS
         accSysBootTime 1.3.6.1.4.1.5.1.1.1.4.3
3-byte date string, HH MM SS
         accSysCpuAvgShort 1.3.6.1.4.1.5.1.1.1.4.4
percentage CPU used over the last minute
         accSysCpuAvgLong 1.3.6.1.4.1.5.1.1.1.4.5
percentage CPU used over the last 5 minutes
         accSysDataSwitchStatus 1.3.6.1.4.1.5.1.1.1.4.6
The status of the hardware switch, to determine whether Data calls could be initiated/accepted over the ISDN line. ONLY voice calls will be accepted or initiated when this h/w switch status is OFF.
         accSysLastConfig 1.3.6.1.4.1.5.1.1.1.4.8
System Last Configuration Time
         accDateY2K 1.3.6.1.4.1.5.1.1.1.4.10
The seven byte long octet string indicates system date and time. The octet string represents year 2000 compliant date and time, and is laid out in the following structured format: 2 Byte unsigned short value of year 1 Byte value of month 1 Byte value of day of the month 1 Byte value of hour 1 Byte value of minutes 1 Byte value of seconds The valid range of values for each of the component is as follows: year 0..2079 month 1..12 day 1..31 hour 0..23 minutes 0..59 seconds 0..59
         accSysBootTimeY2K 1.3.6.1.4.1.5.1.1.1.4.11
The seven bytes long octet string indicates system boot time. The octet string represents year 2000 compliant date and time, and is laid out in the following structured format: 2 Byte unsigned short value of year 1 Byte value of month 1 Byte value of day of the month 1 Byte value of hour 1 Byte value of minutes 1 Byte value of seconds
         accDay 1.3.6.1.4.1.5.1.1.1.4.12
Day of the week (enumnerated MON-SUN [0-6])
     accAccessTable 1.3.6.1.4.1.5.1.1.1.6
A table of users authorized to log in to this unit. To delete an entry, a SetRequest-PDU for the specific instance of accAccessAddr with a NULL value encoding is used.
         accAccessEntry 1.3.6.1.4.1.5.1.1.1.6.1
An entry of information about an authorized user.
             accAccessCmty 1.3.6.1.4.1.5.1.1.1.6.1.1
Access community
             accAccessAddr 1.3.6.1.4.1.5.1.1.1.6.1.2
IP address from which a login request is honored.
             accAccessNetMask 1.3.6.1.4.1.5.1.1.1.6.1.3
Subnet mask used to validate login requests.
             accAccessUdpPort 1.3.6.1.4.1.5.1.1.1.6.1.4
UDP port number of the SNMP application.
     accReload 1.3.6.1.4.1.5.1.1.1.7
Time until system reload shall occur. Upon expiry of the timer, the system will load and execute a new image of the application code. The load file will come from diskette, local EPROM, or over the network, depending on the configuration of the unit.
     accIfNames 1.3.6.1.4.1.5.1.1.1.8
         accIfNumNames 1.3.6.1.4.1.5.1.1.1.8.1
Number of interfaces (physical and logical). There are this many entries in the Name table.
         accIfNameTable 1.3.6.1.4.1.5.1.1.1.8.2
A table of of mnemonic names for physical and logical interfaces
             accIfNameEntry 1.3.6.1.4.1.5.1.1.1.8.2.1
An entry in the Interface Name table
                 accIfNameIndex 1.3.6.1.4.1.5.1.1.1.8.2.1.1
Interface number
                 accIfName 1.3.6.1.4.1.5.1.1.1.8.2.1.2
Mnemonic name for this interface
                 accIfNameDefault 1.3.6.1.4.1.5.1.1.1.8.2.1.3
Default Mnemonic name for this interface. The interface may always be referred to by this name.
     accIfGroupTable 1.3.6.1.4.1.5.1.1.1.9
A table of interface group descriptors supported by this unit. Interface groups may be populated by physical or logical interfaces, or combinations of the two.
         accIfGroupEntry 1.3.6.1.4.1.5.1.1.1.9.1
An entry of information about an interface group.
             accIFGroupIndex 1.3.6.1.4.1.5.1.1.1.9.1.1
Index for the accIfGroupTable.
             accIFGroupName 1.3.6.1.4.1.5.1.1.1.9.1.2
If accIFGroupIndexBase and accIFGroupIndexMax are equal then this object provides the full name of the port, else this object has the prefix of the port name. If this is a prefix then the suffix is a numeric value from 1 to (accIFGroupIndexMax - accIFGroupIndexBase + 1).
             accIFGroupType 1.3.6.1.4.1.5.1.1.1.9.1.3
Type of port group
             accIFGroupIndexBase 1.3.6.1.4.1.5.1.1.1.9.1.4
Lowest IFIndex in this IFGroup
             accIFGroupIndexMax 1.3.6.1.4.1.5.1.1.1.9.1.5
The number of interfaces supported in this IFGroup
             accIFGroupNameDefault 1.3.6.1.4.1.5.1.1.1.9.1.6
If accIFGroupIndexBase and accIFGroupIndexMax are equal then this object provides the full name of the port, else this object has the prefix of the port name. If this is a prefix then the suffix is a numeric value from 1 to (accIFGroupIndexMax - accIFGroupIndexBase + 1). The interface group may always be referenced by this name. It cannot be changed by the user.
     accTrapLog 1.3.6.1.4.1.5.1.1.1.10
           accTrapLogLevel 1.3.6.1.4.1.5.1.1.1.10.1
The base severity level at which traps are recorded in the log. Traps with values greater than this level will not be recorded in the log.
           accTrapLogSaveAction 1.3.6.1.4.1.5.1.1.1.10.2
Setting the value to save-now writes the current trap log to permanent storage.
           accTrapLogBufSize 1.3.6.1.4.1.5.1.1.1.10.3
The trap log buffer size in kilobytes.
           accTrapLogTable 1.3.6.1.4.1.5.1.1.1.10.4
The trap logging table.
               accTrapLogEntry 1.3.6.1.4.1.5.1.1.1.10.4.1
A single trap log entry.
                   accTrapLogTblTime 1.3.6.1.4.1.5.1.1.1.10.4.1.1
SysUpTime when trap occurred.
                   accTrapLogTblType 1.3.6.1.4.1.5.1.1.1.10.4.1.2
SysUpTime when trap occurred.
                   accTrapLogTblLevel 1.3.6.1.4.1.5.1.1.1.10.4.1.3
The severity level associated with this trap.
                   accTrapLogTblData 1.3.6.1.4.1.5.1.1.1.10.4.1.4
The text message of the trap.
                   accTrapLogSeqNum 1.3.6.1.4.1.5.1.1.1.10.4.1.6
The Global Sequence Number for all Traps generated in the System
                   accTrapLogSeverityType 1.3.6.1.4.1.5.1.1.1.10.4.1.7
Severity type of the Trap generated
                   accTrapLogEnterpriseOID 1.3.6.1.4.1.5.1.1.1.10.4.1.8
Enterprise OID for the sent trap
                   accSpecificTrapNum 1.3.6.1.4.1.5.1.1.1.10.4.1.9
Specific Trap number
           accTrapLogSumTable 1.3.6.1.4.1.5.1.1.1.10.5
The trap logging table.
               accTrapLogSumEntry 1.3.6.1.4.1.5.1.1.1.10.5.1
A single trap log entry.
                   accTrapLogSumTime 1.3.6.1.4.1.5.1.1.1.10.5.1.1
SysUpTime when trap occurred.
                   accTrapLogSumType 1.3.6.1.4.1.5.1.1.1.10.5.1.2
The type of trap associated with this entry.
                   accTrapLogSumData 1.3.6.1.4.1.5.1.1.1.10.5.1.3
The text message of the trap.
     accSeepTable 1.3.6.1.4.1.5.1.1.1.13
The SEEP information table.
           accSeepEntry 1.3.6.1.4.1.5.1.1.1.13.1
A single SEEP information table entry.
               accSeepEntrySlot 1.3.6.1.4.1.5.1.1.1.13.1.1
The slot from which the SEEP information is taken.
               accSeepEntryType 1.3.6.1.4.1.5.1.1.1.13.1.2
The type of SEEP.
               accSeepEntrySerial 1.3.6.1.4.1.5.1.1.1.13.1.3
The serial number of the SEEP.
               accSeepEntryAssembly 1.3.6.1.4.1.5.1.1.1.13.1.4
The assembly description of the SEEP.
               accSeepEntryRev 1.3.6.1.4.1.5.1.1.1.13.1.5
The revision number of the SEEP.
               accSeepEntryDate 1.3.6.1.4.1.5.1.1.1.13.1.6
The date contained in the SEEP.
     accStandbyInfo 1.3.6.1.4.1.5.1.1.1.14
           accStandbySysDescr 1.3.6.1.4.1.5.1.1.1.14.1
System description for redundant processor.
           accStandbySoftwareVersion 1.3.6.1.4.1.5.1.1.1.14.2
Software version of redundant processor.
           accStandbySysProcType 1.3.6.1.4.1.5.1.1.1.14.3
System description for redundant processor.
           accStandbySysLocalRam 1.3.6.1.4.1.5.1.1.1.14.4
Local RAM size for redundant processor in kilobytes.
           accStandbySysGlobalRam 1.3.6.1.4.1.5.1.1.1.14.5
Global RAM size for redundant processor in kilobytes.
           accStandbyFsVolStatus 1.3.6.1.4.1.5.1.1.1.14.6
Flash volume status for redundant processor.
           accStandbyFsCfgStatus 1.3.6.1.4.1.5.1.1.1.14.7
Configuration status for redundant processor.
           accStandbyFsLoadFtkFile 1.3.6.1.4.1.5.1.1.1.14.8
Current flash toolkit file redundant processor.
           accStandbyFsLoadAplFile 1.3.6.1.4.1.5.1.1.1.14.9
Current application file for redundant processor.
           accStandbyFsLoadDiaFile 1.3.6.1.4.1.5.1.1.1.14.10
Current application file for redundant processor.
           accStandbySysHwVers 1.3.6.1.4.1.5.1.1.1.14.11
Hardware versions for redundant processor.
     accSyslogTable 1.3.6.1.4.1.5.1.1.1.15
A table of systems to which Syslog Messages generated by this unit shall be sent. To delete an entry, a SetRequest-PDU for the specific instance of accSyslogAddr with a NULL value encoding is used.
           accSyslogEntry 1.3.6.1.4.1.5.1.1.1.15.1
A Syslog Table entry
               accSyslogAddr 1.3.6.1.4.1.5.1.1.1.15.1.1
An IP address to which syslog messages generated by the unit are sent.
               accSyslogSeverity 1.3.6.1.4.1.5.1.1.1.15.1.2
severity level of the messages to be sent.
               accSyslogFacility 1.3.6.1.4.1.5.1.1.1.15.1.3
Facility identifier to use in syslog messages
     accIcpTraps 1.3.6.1.4.1.5.1.1.1.16
           accIcpTrapMsg 1.3.6.1.4.1.5.1.1.1.16.1
ICP Trap Message
     accTrapSequencingStatus 1.3.6.1.4.1.5.1.1.1.18
Indicates trap sequencing feature is On or Off. When set to On, a accTrapLogSeqNum varbind will be appended to every trap issued by the system, and will always be the last varbind
     accSystemServiceTable 1.3.6.1.4.1.5.1.1.1.26
A table of changeable TCP/UDP services.
           accSystemServiceEntry 1.3.6.1.4.1.5.1.1.1.26.1
An entry of information about System Service.
               accSystemService 1.3.6.1.4.1.5.1.1.1.26.1.1
This object is used to identify the TCP/UDP service whose port number is being changed.
               accSystemPort 1.3.6.1.4.1.5.1.1.1.26.1.2
This object is used to set the TCP/UDP service port associated with various system services.