ACC-RIP: View SNMP OID List / Download MIB

VENDOR: ACC


 Home MIB: ACC-RIP
Download as:   
SNMPv2-TC, RFC1155-SMI, RFC-1215, RFC1213-MIB, ACC-MIB, ACC-SYSTEM

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 accRip 1.3.6.1.4.1.5.1.1.16
       accRipAdminStatus 1.3.6.1.4.1.5.1.1.16.1
Adminstrative status of RIP protocol. Extended causes subnet mask information to be included in RIP packets, permitting variable-length subnet masking.
       accRipUpdateTimer 1.3.6.1.4.1.5.1.1.16.2
This unit will send updates to its neighbors at the interval established by this timer. Note that all other RIP timers are scaled off this value.
       accRipGateway 1.3.6.1.4.1.5.1.1.16.3
Declares if the unit is the gateway unit for an AS. Indicates if the unit does or does not advertise that it is the default route. Extended mode causes EGP-derived information to be included in RIP packets.
       accRipNeighborList 1.3.6.1.4.1.5.1.1.16.5
           accRipNeighbor 1.3.6.1.4.1.5.1.1.16.5.1
A neighbor to whom routing updates are sent, and from whom updates are accepted. RIP neighbors must be on the local network. In the case of an unnumbered link this object indicates the ifIndex of the link the neighbor is connected to.
           accRipNeighborIfindex 1.3.6.1.4.1.5.1.1.16.5.2
The ifIndex of the port this RIP neighbor is conected to. It is derived from the IP network table (accIpAddrTable).
       accRipInCmdCnts 1.3.6.1.4.1.5.1.1.16.6
Number of RIP command packets successfully received.
       accRipInRspCnts 1.3.6.1.4.1.5.1.1.16.7
Number of RIP response packets successfully received.
       accRipInErrors 1.3.6.1.4.1.5.1.1.16.8
Number of RIP response and command packets received with errors. Also includes count of packets that could not be handled due to internal errors.
       accRipOutCmdCnts 1.3.6.1.4.1.5.1.1.16.9
Number of RIP command packets successfully transmitted.
       accRipOutRspCounts 1.3.6.1.4.1.5.1.1.16.10
Number of RIP response packets successfully transmitted.
       accRipGeneral 1.3.6.1.4.1.5.1.1.16.11
             accRipMessageLevel 1.3.6.1.4.1.5.1.1.16.11.1
The configured diagnostic level for RIP. Setting this value to 1 enables RIP to generate important diagnostic information. Increasing the value increases the diagnostic information. Level 7 is mostly informational.
             accRipDefaultVersion 1.3.6.1.4.1.5.1.1.16.11.2
The default verison of RIP to use on new RIP interfaces.
       accRip2IfConfExtTable 1.3.6.1.4.1.5.1.1.16.12
An extension of the rip2IfConfTable.
             accRip2IfConfExtEntry 1.3.6.1.4.1.5.1.1.16.12.1
Each entry in this table contains proprietary extensions to the rip2IfConfTable
                 accRip2IfConfExtAddress 1.3.6.1.4.1.5.1.1.16.12.1.1
Same definition as rip2IfConfAddress.
                 accRip2IfConfExtProfile 1.3.6.1.4.1.5.1.1.16.12.1.2
An index into the accRipProfileTable
                 accRip2IfConfExtDefaultOnly 1.3.6.1.4.1.5.1.1.16.12.1.3
Generate a default route only on this interface.
                 accRip2IfConfExtDefaultMetric 1.3.6.1.4.1.5.1.1.16.12.1.4
If generating a default route this is the metric that will be used in updates sent out this interface.
                 accRip2IfConfExtMessageLevel 1.3.6.1.4.1.5.1.1.16.12.1.5
The configured diagnostic level for this RIP interface. Setting this value to 1 will enable the interface to generate critical diagnostic information. Increasing the value increases the diagnostic information. Level 7 is mostly informational.
                 accRip2IfConfExtAdminStat 1.3.6.1.4.1.5.1.1.16.12.1.6
The administrative state of this RIP interface.
                 accRip2IfConfExtTxOnly 1.3.6.1.4.1.5.1.1.16.12.1.7
Send RIP updates and ignore received updates on this interface.
       accRipProfileTable 1.3.6.1.4.1.5.1.1.16.13
A table describing each of the RIP Profile groups.
             accRipProfileEntry 1.3.6.1.4.1.5.1.1.16.13.1
Each entry in this table describes a Rip Profile Entry.
                 accRipProfileId 1.3.6.1.4.1.5.1.1.16.13.1.1
The index into the accRipTimerGroupTable
                 accRipProfileUpdateInterval 1.3.6.1.4.1.5.1.1.16.13.1.2
The periodic RIP update interval.
                 accRipProfilePacketGap 1.3.6.1.4.1.5.1.1.16.13.1.3
The inter-packet gap between fragmented updates in 1/100s of a second.
                 accRipProfileMaxPkts 1.3.6.1.4.1.5.1.1.16.13.1.4
The maximum number of packets that can be issued during any update burst.
                 accRipProfileRetxTO 1.3.6.1.4.1.5.1.1.16.13.1.5
The interval in seconds that RIP will wait before retransmitting a triggered update (fragment).
                 accRipProfileShortPollRetries 1.3.6.1.4.1.5.1.1.16.13.1.6
The number of times RIP will retry to establish a non-responding neighbor using the short poll interval (5 minutes) after the neighbor has gone non-responding.
                 accRipProfileBackground 1.3.6.1.4.1.5.1.1.16.13.1.7
The background poll interval that RIP will attempt to re-establish a neighbor relationship.
                 accRipProfileStatus 1.3.6.1.4.1.5.1.1.16.13.1.8
The current status of this protocol entry.
       accRipNbrTable 1.3.6.1.4.1.5.1.1.16.16
A table describing RIP neighbor relationships.
             accRipNbrEntry 1.3.6.1.4.1.5.1.1.16.16.1
Each entry in this table describes a administratively configured RIP neighbor. Only the neighbors listed on a interface are listened too.
                 accRipNbrIpAddr 1.3.6.1.4.1.5.1.1.16.16.1.1
The IP address of this system on the indicated subnet.
                 accRipNbrTriggered 1.3.6.1.4.1.5.1.1.16.16.1.2
Indicates the RIP neighbor is using triggered (on demand) RIP.
                 accRipNbrType 1.3.6.1.4.1.5.1.1.16.16.1.3
The ifIndex for the associated IP Interface. A non-zero valueindicates that the interface is an unnumbered interface and ripNbrIfIpAddr has the value of 0.0.0.0.
                 accRipNbrStatus 1.3.6.1.4.1.5.1.1.16.16.1.4
The current status of this protocol entry.
       accDemandRipTable 1.3.6.1.4.1.5.1.1.16.17
This table contains information about demand RIP neighbors that have been either administratively configured or dynamically learnt.
             accDemandRipEntry 1.3.6.1.4.1.5.1.1.16.17.1
Each entry of this table represents a single demand RIP neighbor.
                 accDemandRipNeighbor 1.3.6.1.4.1.5.1.1.16.17.1.1
The RIP neighbors IP address. If this is an unnumbered link then this object will represent the ifIndex of the interface.
                 accDemandRipRetxTimeouts 1.3.6.1.4.1.5.1.1.16.17.1.2
The number of times a retransmit timeout has occurred on a demand RIP interface.
                 accDemandRipShortPollRetries 1.3.6.1.4.1.5.1.1.16.17.1.3
The number of short poll retries to this neighbor.
                 accDemandRipBackGroundRetries 1.3.6.1.4.1.5.1.1.16.17.1.4
The number of background poll retries to this neighbor.
                 accDemandRipTransitions 1.3.6.1.4.1.5.1.1.16.17.1.5
The number of times this neighbor has transitioned from the Down state to an Up state.
                 accDemandRipSeqNumber 1.3.6.1.4.1.5.1.1.16.17.1.6
The sequence number of the last received update.
                 accDemandRipStatus 1.3.6.1.4.1.5.1.1.16.17.1.7
The current status of the demand RIP neighbor.
       accRipExportTable 1.3.6.1.4.1.5.1.1.16.18
A table describing RIP export policies.
             accRipExportEntry 1.3.6.1.4.1.5.1.1.16.18.1
Each entry in this table describes a administratively configured export policy.
                 accRipExportProtocol 1.3.6.1.4.1.5.1.1.16.18.1.1
The routing protocol by which the route was learned.
                 accRipExportProtoSpecific 1.3.6.1.4.1.5.1.1.16.18.1.2
Protocol dependant. Not currently used. Should always have an instance value of zero.
                 accRipExportNetwork 1.3.6.1.4.1.5.1.1.16.18.1.3
The prefix to be used when matching policies. Routes are logically anded with the policies mask and compared to this prefix.
                 accRipExportMask 1.3.6.1.4.1.5.1.1.16.18.1.4
The mask to be used when matching policies.
                 accRipExportDestIf 1.3.6.1.4.1.5.1.1.16.18.1.5
The outbound interface for the update being created.
                 accRipExportAction 1.3.6.1.4.1.5.1.1.16.18.1.6
Determines the policy taken on routes matching this set of criteria.
                 accRipExportMetric 1.3.6.1.4.1.5.1.1.16.18.1.7
The metric that is to be used when exporting a route into the routing domain on the outgoing interface. The value 16 tells RIP to use the protocol owners metric. Reading the value 17 means that this object is not used.
                 accRipExportStatus 1.3.6.1.4.1.5.1.1.16.18.1.8
The current status of this protocol entry.
       accRipImportTable 1.3.6.1.4.1.5.1.1.16.19
A table describing RIP import policies.
             accRipImportEntry 1.3.6.1.4.1.5.1.1.16.19.1
Each entry in this table describes a administratively configured import policy.
                 accRipImportInterface 1.3.6.1.4.1.5.1.1.16.19.1.1
The interface from which the RIP update was received.
                 accRipImportPeerAddress 1.3.6.1.4.1.5.1.1.16.19.1.2
The RIP neighbors address.
                 accRipImportNetwork 1.3.6.1.4.1.5.1.1.16.19.1.3
The prefix to be used when matching policies. Routes are logically anded with the policies mask and compared to this prefix.
                 accRipImportMask 1.3.6.1.4.1.5.1.1.16.19.1.4
The mask to be used when matching policies.
                 accRipImportAction 1.3.6.1.4.1.5.1.1.16.19.1.5
The action to take when a policy match occurs.
                 accRipImportMetric 1.3.6.1.4.1.5.1.1.16.19.1.6
The metric that is to be used when importing a route that has matched this policy. The value 16 tells RIP to use the protocol owners metric.
                 accRipImportPref 1.3.6.1.4.1.5.1.1.16.19.1.7
The preference that RIP will assign to a route matching this policy. The preference is used to determine precedence between other routing protocols that learn paths to the same destination.
                 accRipImportStatus 1.3.6.1.4.1.5.1.1.16.19.1.8
The current status of this protocol entry.
       accRipTraps 1.3.6.1.4.1.5.1.1.16.20
             accRipTrapMsg 1.3.6.1.4.1.5.1.1.16.20.1
Enterprise Trap Message for rip.