ACC-L2TP: View SNMP OID List / Download MIB

VENDOR: ACC


 Home MIB: ACC-L2TP
Download as:   
SNMPv2-TC, RFC1155-SMI, ACC-SYSTEM, RFC-1215, ACC-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 accL2tp 1.3.6.1.4.1.5.1.1.71
       accL2tpGeneral 1.3.6.1.4.1.5.1.1.71.1
           accL2tpGeneralScalars 1.3.6.1.4.1.5.1.1.71.1.1
               accL2tpVendorName 1.3.6.1.4.1.5.1.1.71.1.1.1
Vendor Name
               accL2tpFirmwareRev 1.3.6.1.4.1.5.1.1.71.1.1.2
Firmware Revision
               accL2pAdminState 1.3.6.1.4.1.5.1.1.71.1.1.3
L2TP Adminstrative state.
               accL2tpProtocolVersion 1.3.6.1.4.1.5.1.1.71.1.1.4
L2TP Protocol Version
               accL2tpControlRWS 1.3.6.1.4.1.5.1.1.71.1.1.5
Default Control Window Size adopted by Dynamically created L2TP Tunnels
               accL2tpPayloadSeq 1.3.6.1.4.1.5.1.1.71.1.1.6
If set to ON, the remote peer will wait for an acknowledgement after sending Payload RWS messages
               accL2tpPayloadRWS 1.3.6.1.4.1.5.1.1.71.1.1.7
When Payload Sequencing is set to YES, the remote peer will wait for an acknowledgement after sending this many messages
               accL2tpKeepAlive 1.3.6.1.4.1.5.1.1.71.1.1.8
Default Hello control message interval
               accL2tpMaxAckTimeout 1.3.6.1.4.1.5.1.1.71.1.1.9
Timeout interval for both Control and Payload acknowledgements
               accL2tpMaxRetrans 1.3.6.1.4.1.5.1.1.71.1.1.10
Maximum number of Retransmissions before assuming a peer is not responding.
               accL2tpIdleDisconnect 1.3.6.1.4.1.5.1.1.71.1.1.11
Interval in which to wait after the last payload session within the tunnel disconnects before tearing down the tunnel itself
               accL2tpTunnelAuthentication 1.3.6.1.4.1.5.1.1.71.1.1.12
Default sevurity method for dynamically created L2TP Tunnels
               accL2tpKeyDistribution 1.3.6.1.4.1.5.1.1.71.1.1.13
Method to obtain its secrets for the specified security method
               accL2tpProxyAuthentication 1.3.6.1.4.1.5.1.1.71.1.1.14
Causes the L2TP protocol to ignore the proxy authentication information obtained by the L2TP access concentrator (LAC) if the proxy authentication method is CHAP. When L2TP ignores the proxy authentication, the PPP protocol is forced to challenge the remote client again.
               accL2tpServerState 1.3.6.1.4.1.5.1.1.71.1.1.15
Enables or disables L2TP UDP Transport Server.
               accL2tpMessageLevel 1.3.6.1.4.1.5.1.1.71.1.1.16
L2TP Message Level
               accL2tpDebugMask 1.3.6.1.4.1.5.1.1.71.1.1.17
Set in conjunction with L2TP Message Level to filter out messages
               accL2tpPayLoadLength 1.3.6.1.4.1.5.1.1.71.1.1.18
Used to configure the L2TP default action regarding payload lengths
               accL2tpAttributeHiding 1.3.6.1.4.1.5.1.1.71.1.1.19
Configures the way that L2TP handles attribute value pairs (AVPs). Enabling this option causes L2TP to hide AVPs typically considered sensitive.
               accL2tpCallConfirm 1.3.6.1.4.1.5.1.1.71.1.1.20
Configures the Call Confirm operation on L2TP LAC. When enabled it causes the LAC to verify that the LNS will proceed with a particular call.
           accL2tpTunnelConfigTable 1.3.6.1.4.1.5.1.1.71.1.2
Displays all L2TP Tunnel entries configured on the system
               accL2tpTunnelConfigEntry 1.3.6.1.4.1.5.1.1.71.1.2.1
Tok_String
                   accL2tpTunnelConfigTunnelIfIndex 1.3.6.1.4.1.5.1.1.71.1.2.1.1
Interface index for a tunnel port
                   accL2tpTunnelConfigControlRWS 1.3.6.1.4.1.5.1.1.71.1.2.1.2
Default Control Window Size adopted by Dynamically created L2TP Tunnels
                   accL2tpTunnelConfigPayloadSeq 1.3.6.1.4.1.5.1.1.71.1.2.1.3
If set to ON, the remote peer will wait for an acknowledgement after sending Payload RWS messages
                   accL2tpTunnelConfigPayloadRWS 1.3.6.1.4.1.5.1.1.71.1.2.1.4
When Payload Sequencing is set to YES, the remote peer will wait for an acknowledgement after sending this many messages
                   accL2tpTunnelConfigKeepAlive 1.3.6.1.4.1.5.1.1.71.1.2.1.5
Default Hello control message interval
                   accL2tpTunnelConfigMaxAckTimeout 1.3.6.1.4.1.5.1.1.71.1.2.1.6
Timeout interval for both Control and Payload acknowledgements
                   accL2tpTunnelConfigMaxRetrans 1.3.6.1.4.1.5.1.1.71.1.2.1.7
Maximum number of Retransmissions before assuming a peer is not responding.
                   accL2tpTunnelConfigIdleDisconnect 1.3.6.1.4.1.5.1.1.71.1.2.1.8
Interval in which to wait after the last payload session within the tunnel disconnects before tearing down the tunnel itself
                   accL2tpTunnelConfigTransportMech 1.3.6.1.4.1.5.1.1.71.1.2.1.9
Type of Transport layer protocol that L2TP should use for this tunnel
                   accL2tpTunnelConfigTunnelAuthentication 1.3.6.1.4.1.5.1.1.71.1.2.1.10
Configures the tunnel peer authentication method used for dynamically created L2TP tunnels.
                   accL2tpTunnelConfigProxyAuthentication 1.3.6.1.4.1.5.1.1.71.1.2.1.11
Causes the L2TP protocol to ignore the proxy authentication information obtained by the access concentrator if the proxy authentication method is CHAP.
                   accL2tpTunnelConfigMessageLevel 1.3.6.1.4.1.5.1.1.71.1.2.1.12
L2TP Message Level
                   accL2tpTunnelConfigDebugMask 1.3.6.1.4.1.5.1.1.71.1.2.1.13
Set in conjunction with L2TP Message Level to filter out messages
                   accL2tpTunnelConfigPayLoadLength 1.3.6.1.4.1.5.1.1.71.1.2.1.14
Used to configure the L2TP default action regarding payload lengths. Including the payload length in the L2TP payload L2TP header enables some vendors to avoid recalculating the payload length. Disabling this option informs L2TP not to include the payload length in the L2TP packet header, reducing the overall L2TP packet size by two bytes. Entering this command without specifying a setting causes the L2TP tunnel payload length to return to its default setting.
                   accL2tpTunnelConfigAttributeHiding 1.3.6.1.4.1.5.1.1.71.1.2.1.15
Configures the way that L2TP handles attribute value pairs (AVPs). Disabling this parameter causes all AVPs to be sent without encryption; this might be necessary when tunneling to a peer that does not support attribute hiding. If this command is entered without specifying a setting, attribute hiding returns to its default setting.
                   accL2tpTunnelConfigCallConfirm 1.3.6.1.4.1.5.1.1.71.1.2.1.16
Configures the Call Confirm operation on L2TP LAC. When enabled it causes the LAC to verify that the LNS will proceed with a particular call. If the LNS is not able to proceed with the call because of missing information in the call setup message or resource limitations, the LNS rejects the call. This, in turn, causes the LAC to disconnect the remote user. If the LAC is configured to perform called number tunneling, or the called number authorization mode is VPSM, the incoming call will not be answered until the LAC has confirmed the call with the LNS. Enabling this option can lessen needless call charges. The LAC confirms the call with the LNS when the LAC sends an initial session setup message, including called and calling number information, to the LNS.
                   accL2tpTunnelConfigEvents 1.3.6.1.4.1.5.1.1.71.1.2.1.17
This object is used to generate events into the tunnel state machine. For example a open will cause the tunnel to be forced open if it is idle. A close will cause a disconnect of a established tunnel
                   accL2tpTunnelConfigCreate 1.3.6.1.4.1.5.1.1.71.1.2.1.18
The current status of this entry. It can be used to create and delete tunnel entries.
                   accL2tpTunnelConfigStatus 1.3.6.1.4.1.5.1.1.71.1.2.1.19
The current status of this entry.
           accL2tpTunnelStatusTable 1.3.6.1.4.1.5.1.1.71.1.3
Displays status of all L2TP Tunnel entries Configured on the system
               accL2tpTunnelStatusEntry 1.3.6.1.4.1.5.1.1.71.1.3.1
Tok_String
                   accL2tpTunnelStatusTunnelIfIndex 1.3.6.1.4.1.5.1.1.71.1.3.1.1
Interface index for a tunnel port
                   accL2tpTunnelStatusLocalTunnelId 1.3.6.1.4.1.5.1.1.71.1.3.1.2
Local Tunnel port Id
                   accL2tpTunnelStatusRemTunnelId 1.3.6.1.4.1.5.1.1.71.1.3.1.3
Remote Tunnel port Id
                   accL2tpTunnelStatusRemFraming 1.3.6.1.4.1.5.1.1.71.1.3.1.4
Remote Framing
                   accL2tpTunnelStatusRemBearerCap 1.3.6.1.4.1.5.1.1.71.1.3.1.5
Remote Bearer Capabilities
                   accL2tpTunnelStatusRemControlRWS 1.3.6.1.4.1.5.1.1.71.1.3.1.6
Control Window Size adopted by Remote end of L2TP Tunnels
                   accL2tpTunnelStatusRemKeepAlive 1.3.6.1.4.1.5.1.1.71.1.3.1.7
Remote Hello control message interval
                   accL2tpTunnelStatusRemVendorName 1.3.6.1.4.1.5.1.1.71.1.3.1.8
Remote Vendor Name
                   accL2tpTunnelStatusRemFirmRev 1.3.6.1.4.1.5.1.1.71.1.3.1.9
Remote Firmware Revision
                   accL2tpTunnelStatusRemHostName 1.3.6.1.4.1.5.1.1.71.1.3.1.10
Remote Host Name
                   accL2tpTunnelStatusRemProtocolVer 1.3.6.1.4.1.5.1.1.71.1.3.1.11
Remote Protocol Version
                   accL2tpTunnelStatusTunnelState 1.3.6.1.4.1.5.1.1.71.1.3.1.12
Indicates the current state of the L2TP Tunnel
                   accL2tpTunnelStatusKeepAlive 1.3.6.1.4.1.5.1.1.71.1.3.1.13
Default Hello control message interval
                   accL2tpTunnelStatusCalcRemRWS 1.3.6.1.4.1.5.1.1.71.1.3.1.14
Calculated Remote RWS
                   accL2tpTunnelStatusCalcRemRetransTimeout 1.3.6.1.4.1.5.1.1.71.1.3.1.15
Calculated Remote Retransmit Timeout
                   accL2tpTunnelStatusQueueLength 1.3.6.1.4.1.5.1.1.71.1.3.1.16
Queue Length
                   accL2tpTunnelStatusTxOctets 1.3.6.1.4.1.5.1.1.71.1.3.1.17
Octets Transmitted
                   accL2tpTunnelStatusTxPackets 1.3.6.1.4.1.5.1.1.71.1.3.1.18
Packets Transmitted
                   accL2tpTunnelStatusRxOctets 1.3.6.1.4.1.5.1.1.71.1.3.1.19
Octets Received
                   accL2tpTunnelStatusRxPackets 1.3.6.1.4.1.5.1.1.71.1.3.1.20
Packets Received
                   accL2tpTunnelStatusTotalSessions 1.3.6.1.4.1.5.1.1.71.1.3.1.21
Total Sessions
                   accL2tpTunnelStatusActiveSessions 1.3.6.1.4.1.5.1.1.71.1.3.1.22
Active Sessions
                   accL2tpTunnelStatusAttemptFails 1.3.6.1.4.1.5.1.1.71.1.3.1.23
Failed Attempts
                   accL2tpTunnelStatusRetransTimeouts 1.3.6.1.4.1.5.1.1.71.1.3.1.24
Retransmit timeouts
                   accL2tpTunnelStatusBackwardTransitions 1.3.6.1.4.1.5.1.1.71.1.3.1.25
Number of Backward transmissions
                   accL2tpTunnelStatusLastTransitions 1.3.6.1.4.1.5.1.1.71.1.3.1.26
Time since Last Transition
                   accL2tpTunnelStatusLastCause 1.3.6.1.4.1.5.1.1.71.1.3.1.27
Cause for Last Transition
                   accL2tpTunnelStatusNextSendSeq 1.3.6.1.4.1.5.1.1.71.1.3.1.28
Shows the next sequence number to be sent in the next control packet.
                   accL2tpTunnelStatusNextSendSeqAck 1.3.6.1.4.1.5.1.1.71.1.3.1.29
Shows the sequence number acknowledged by the terminal peer.
                   accL2tpTunnelStatusRecvSeq 1.3.6.1.4.1.5.1.1.71.1.3.1.30
Shows the last sequence number received in a control packet.
                   accL2tpTunnelStatusRecvSeqAck 1.3.6.1.4.1.5.1.1.71.1.3.1.31
Shows the last sequence number this L2TP entity has acknowledged to the remote peer as received.
                   accL2tpTunnelStatusOutOfSeqs 1.3.6.1.4.1.5.1.1.71.1.3.1.32
Indicates the number of control packets that were received out of sequence.
                   accL2tpTunnelStatusOutOfSeqQLen 1.3.6.1.4.1.5.1.1.71.1.3.1.33
Indicates the number of control packets that were received out of sequence. These control packets wait for a specified time in the out of sequence queue for the packet with the missing sequence number.
                   accL2tpTunnelStatusOutOfWindows 1.3.6.1.4.1.5.1.1.71.1.3.1.34
The number of control packets that were received outside of the offered sequence window size.
                   accL2tpTunnelStatusInDiscards 1.3.6.1.4.1.5.1.1.71.1.3.1.35
The number of packets that are discarded coming in.
                   accL2tpTunnelStatusOutDiscards 1.3.6.1.4.1.5.1.1.71.1.3.1.36
The number of packets that are discarded going out.
           accL2tpSessionTable 1.3.6.1.4.1.5.1.1.71.1.5
Displays all L2TP Tunnel entries configured on the system
               accL2tpSessionEntry 1.3.6.1.4.1.5.1.1.71.1.5.1
Tok_String
                   accL2tpSessionTunnelIfIndex 1.3.6.1.4.1.5.1.1.71.1.5.1.1
Interface index for tunnel port
                   accL2tpSessionCallType 1.3.6.1.4.1.5.1.1.71.1.5.1.2
Call Direction
                   accL2tpSessionLocalCallId 1.3.6.1.4.1.5.1.1.71.1.5.1.3
Session Identifier used by Local Tunnel Endpoint for this session
                   accL2tpSessionRemoteCallId 1.3.6.1.4.1.5.1.1.71.1.5.1.4
Session Identifier used by Remote Tunnel Endpoint for this session
                   accL2tpSessionCallSerialId 1.3.6.1.4.1.5.1.1.71.1.5.1.5
Serial ID for this session
                   accL2tpSessionRemoteHostName 1.3.6.1.4.1.5.1.1.71.1.5.1.6
Remote Host Name
                   accL2tpSessionPhysChanId 1.3.6.1.4.1.5.1.1.71.1.5.1.7
Port Identifier of the Physical Port being tunneled at the other end of this tunnel
                   accL2tpSessionBearerCap 1.3.6.1.4.1.5.1.1.71.1.5.1.8
Type of call that has been physically terminated at the LAC
                   accL2tpSessionFramingCap 1.3.6.1.4.1.5.1.1.71.1.5.1.9
Type of call that has been physically terminated at the LAC
                   accL2tpSessionConnectSpeed 1.3.6.1.4.1.5.1.1.71.1.5.1.10
LACs Negotiated Modem Speed
                   accL2tpSessionDNIS 1.3.6.1.4.1.5.1.1.71.1.5.1.11
Phone number dialed by the Remote User
                   accL2tpSessionCLID 1.3.6.1.4.1.5.1.1.71.1.5.1.12
Phone number that the Remote User is dialing from
                   accL2tpSessionSubAddress 1.3.6.1.4.1.5.1.1.71.1.5.1.13
Additional Addressing Information
                   accL2tpSessionRemoteRWS 1.3.6.1.4.1.5.1.1.71.1.5.1.14
Payload Receive Window Size that the remote endpoint has requested for this session
                   accL2tpSessionRemotePPD 1.3.6.1.4.1.5.1.1.71.1.5.1.15
Packet Processing Delay that the remote endpoint expects to incur for processing a window full of packets received (in 0.1 second units)
                   accL2tpSessionProxyPpp 1.3.6.1.4.1.5.1.1.71.1.5.1.16
A value of YES indicates that the LAC initiated a PPP session with the remote client before tunneling was performed
                   accL2tpSessionAuthMethod 1.3.6.1.4.1.5.1.1.71.1.5.1.17
If Proxy PPP was performed, then this field may indicate the type of authentication that was initiated
                   accL2tpSessionState 1.3.6.1.4.1.5.1.1.71.1.5.1.18
Current state of the session
                   accL2tpSessionLocalPort 1.3.6.1.4.1.5.1.1.71.1.5.1.19
Local interface that this tunnel has connected to
           accL2tpSessionStatusTable 1.3.6.1.4.1.5.1.1.71.1.6
Displays all L2TP Tunnel entries configured on the system
               accL2tpSessionStatusEntry 1.3.6.1.4.1.5.1.1.71.1.6.1
Tok_String
                   accL2tpSessionStatusTunnelIfIndex 1.3.6.1.4.1.5.1.1.71.1.6.1.1
Interface index for tunnel port
                   accL2tpSessionStatusLocalCallId 1.3.6.1.4.1.5.1.1.71.1.6.1.2
Session Identifier used by Local Tunnel Endpoint for this session
                   accL2tpSessionStatusInDiscards 1.3.6.1.4.1.5.1.1.71.1.6.1.3
Number of Payload packets discarded because transmit queue was full
                   accL2tpSessionStatusTxSequenceResets 1.3.6.1.4.1.5.1.1.71.1.6.1.4
Shows the number of packets that were sent with the Reset bit (R-bit) set.
                   accL2tpSessionStatusCalcRWS 1.3.6.1.4.1.5.1.1.71.1.6.1.5
Calculated Remote RWS
                   accL2tpSessionStatusTxQueueLength 1.3.6.1.4.1.5.1.1.71.1.6.1.6
Queue Length
                   accL2tpSessionStatusNextSendSeq 1.3.6.1.4.1.5.1.1.71.1.6.1.7
Shows the number of sequenced packets sent from this RAC at the time the display command was performed. This value increments sequentially from 0 to 65535. After the maximum value of 65535 is reached, the sequence restarts at 0.
                   accL2tpSessionStatusNextSendSeqAck 1.3.6.1.4.1.5.1.1.71.1.6.1.8
Shows the number of sequenced packets sent from this RAC that have been acknowledged by the remote peer since the tunnel was established. This value increments sequentially from 0 to 65535. After the maximum value of 65535 is reached, the sequence restarts at 0.
                   accL2tpSessionStatusNextRecvSeq 1.3.6.1.4.1.5.1.1.71.1.6.1.9
Shows the number of sequenced packets that this RAC has received and acknowledged back to its tunnel peer since the tunnel was established. This value increments sequentially from 0 to 65535. After the maximum value of 65535 is reached, the sequence restarts at 0.
                   accL2tpSessionStatusNextRecvSeqAck 1.3.6.1.4.1.5.1.1.71.1.6.1.10
Shows the number of sequenced packets received by this RAC that have been acknowledged to the remote peer since the tunnel was established. This value increments sequentially from 0 to 65535. After the maximum value of 65535 is reached, the sequence restarts at 0.
                   accL2tpSessionStatusOutOfSeqs 1.3.6.1.4.1.5.1.1.71.1.6.1.11
Shows the number of payload packets waiting in the out-of-sequence queue. Packets in this queue are waiting for the delivery of packets that may be delayed in the network.
                   accL2tpSessionStatusOutOfSeqQLen 1.3.6.1.4.1.5.1.1.71.1.6.1.12
Shows the number of payload packets waiting in the out-of-sequence queue. Packets in this queue are waiting for the delivery of packets that may be delayed in the network.
                   accL2tpSessionStatusTxOctets 1.3.6.1.4.1.5.1.1.71.1.6.1.13
The number of octets that are being transmitted.
                   accL2tpSessionStatusTxPackets 1.3.6.1.4.1.5.1.1.71.1.6.1.14
The number of packets that are being transmitted.
                   accL2tpSessionStatusRxOctets 1.3.6.1.4.1.5.1.1.71.1.6.1.15
The number of octets that are being received.
                   accL2tpSessionStatusRxPackets 1.3.6.1.4.1.5.1.1.71.1.6.1.16
The number of packets that are being received.
                   accL2tpSessionStatusOutDiscards 1.3.6.1.4.1.5.1.1.71.1.6.1.17
Shows the number of received packets that have been discarded during this session.
                   accL2tpSessionStatusOutOfWindows 1.3.6.1.4.1.5.1.1.71.1.6.1.18
The number of payload packets that were received outside of the offered sequence window size.
                   accL2tpSessionStatusRxSequenceResets 1.3.6.1.4.1.5.1.1.71.1.6.1.19
The number of payload packets that were received that had the R-bit set.
           accL2tpEndpointDomainTable 1.3.6.1.4.1.5.1.1.71.1.7
Displays all L2TP Tunnel entries configured on the system
               accL2tpEndpointDomainEntry 1.3.6.1.4.1.5.1.1.71.1.7.1
Tok_String
                   accL2tpEndpointDomain 1.3.6.1.4.1.5.1.1.71.1.7.1.1
A domain typically consist of L2TP tunnel peers. Each of which can serve as an endpoint for a tunnel originating at the local router.
                   accL2tpEndpointDomainSecret 1.3.6.1.4.1.5.1.1.71.1.7.1.2
Shared password used by tunnel peers to authenticate each other.
                   accL2tpEndpointDomainNumberGroup 1.3.6.1.4.1.5.1.1.71.1.7.1.3
This object identifies the Called Number Group that is to be associated with this Endpoint Domain.
                   accL2tpEndpointDomainStatus 1.3.6.1.4.1.5.1.1.71.1.7.1.4
The current status of this entry.
       accL2tpTransport 1.3.6.1.4.1.5.1.1.71.2
           accL2tpTransportUdp 1.3.6.1.4.1.5.1.1.71.2.1
               accL2tpTransportUdpScalars 1.3.6.1.4.1.5.1.1.71.2.1.1
                   accL2tpUdpServerPort 1.3.6.1.4.1.5.1.1.71.2.1.1.1
Default UDP Port number L2TP will connect to when passively waiting for incoming connections
                   accL2tpUdpPayloadCksums 1.3.6.1.4.1.5.1.1.71.2.1.1.2
When set to YES, L2TP will inform UDP to checksum L2TP Payload messages. L2TP Control messages are always checksummed
                   accL2tpUdpFixedAddress 1.3.6.1.4.1.5.1.1.71.2.1.1.3
Configures the default behavior of the transport driver to support multihomed or roaming endpoints.
                   accL2tpUdpSrcIpAddress 1.3.6.1.4.1.5.1.1.71.2.1.1.4
configures the L2TP UDP transport driver to assign the given address to all L2TP packets trans mitted. Configuring a fixed interface by assigning an IP address to all L2TP packets is done to improve L2TP performance; however, limiting this value to a single interface may cause the address to become unreachable if the network goes down.
                   accL2tpUdpStatsRsrcFails 1.3.6.1.4.1.5.1.1.71.2.1.1.5
Shows the number of times that a request for memory has failed.
                   accL2tpUdpStatsInDiscards 1.3.6.1.4.1.5.1.1.71.2.1.1.6
Shows the number of received L2TP packets that were discarded.
                   accL2tpUdpStatsUnknownTIDs 1.3.6.1.4.1.5.1.1.71.2.1.1.7
Shows the number of packets received from unknown tunnels.
               accL2tpUdpTransportTable 1.3.6.1.4.1.5.1.1.71.2.1.2
Displays all L2TP Tunnel entries configured on the system
                   accL2tpUdpTransportEntry 1.3.6.1.4.1.5.1.1.71.2.1.2.1
Tok_String
                       accL2tpUdpTransportTunnelIfIndex 1.3.6.1.4.1.5.1.1.71.2.1.2.1.1
Interface index for tunnel port
                       accL2tpUdpTransportEndpointIpAddress 1.3.6.1.4.1.5.1.1.71.2.1.2.1.2
Tunnel Remote Endpoint Ip Address
                       accL2tpUdpTransportPort 1.3.6.1.4.1.5.1.1.71.2.1.2.1.3
Value of UDP Port that will be used when establishing a connection
                       accL2tpUdpTransportPayloadCksum 1.3.6.1.4.1.5.1.1.71.2.1.2.1.4
When this is set to YES, UDP will calculate the Payload checksum
                       accL2tpUdpTransportFixedAddress 1.3.6.1.4.1.5.1.1.71.2.1.2.1.5
Configures the L2tp UDP transport layer to support multihomed or roaming remote clients.Supporting multihomed remote clients enables the tunnel peer to change its IP address; this typically occurs if the remote client is multihomed or has a co-located LAC and roams out of a zone.
                       accL2tpUdpTransportStatus 1.3.6.1.4.1.5.1.1.71.2.1.2.1.6
The current status of this entry.
               accL2tpUdpConnectionTable 1.3.6.1.4.1.5.1.1.71.2.1.3
Displays all L2TP Tunnel entries configured on the system
                   accL2tpUdpConnectionEntry 1.3.6.1.4.1.5.1.1.71.2.1.3.1
Tok_String
                       accL2tpUdpConnectionTunnelIfIndex 1.3.6.1.4.1.5.1.1.71.2.1.3.1.1
Interface index for tunnel port
                       accL2tpUdpConnectionEndpointIpAddress 1.3.6.1.4.1.5.1.1.71.2.1.3.1.2
Tunnel Remote Endpoint Ip Address
                       accL2tpUdpConnectionRxPort 1.3.6.1.4.1.5.1.1.71.2.1.3.1.3
Receive Port
                       accL2tpUdpConnectionTxPort 1.3.6.1.4.1.5.1.1.71.2.1.3.1.4
Transmit Port
                       accL2tpUdpConnectionAddressChanges 1.3.6.1.4.1.5.1.1.71.2.1.3.1.5
Number of times User changed his Ip Address
               accL2tpTraps 1.3.6.1.4.1.5.1.1.71.2.1.4
                   accL2tpTrapMsg 1.3.6.1.4.1.5.1.1.71.2.1.4.1
Enterprise Trap Message for L2tp