ACC-FLASH: View SNMP OID List / Download MIB

VENDOR: ACC


 Home MIB: ACC-FLASH
Download as:   
ACC-MIB, RFC1155-SMI, ACC-SYSTEM

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 accBridge 1.3.6.1.4.1.5.1.1.4
     accBrFdbTimeout 1.3.6.1.4.1.5.1.1.4.1
Time (seconds) for which a learned Forwarding Database entry is valid before being deleted if it has not been seen.
     accBrFdbLearnMode 1.3.6.1.4.1.5.1.1.4.2
When Learning Mode is active, Bridges update their Forwarding Database with dynamic entries learned by inspection of the Source MAC Address of received frames. When learning mode is off, Bridges discard packets which are not indicated as forward in their Forwarding Database.
     accBrFdbRamCurrSize 1.3.6.1.4.1.5.1.1.4.3
The number of entries in the RAM FDB table that contains static as well as dynamic entries.
     accBrFdbRamMaxSize 1.3.6.1.4.1.5.1.1.4.5
The maximum number of entries configured for the RAM FDB table.
     accBrFdbNvmMaxSize 1.3.6.1.4.1.5.1.1.4.6
Number of static FDB entries that can be saved in the NVM RAM.
     accBrFdbTable 1.3.6.1.4.1.5.1.1.4.7
A list of Forwarding Database entries. Entries may be added/deleted either through learning or explicit management action.
         accBrFdbEntry 1.3.6.1.4.1.5.1.1.4.7.1
A Forwarding Database entry which defines Bridge action to be taken based upon the destination MAC Address of received frames.
             accBrFdbEntMacAddr 1.3.6.1.4.1.5.1.1.4.7.1.1
MAC Address of the Forwarding Database Entry. Set this object to NULL to delete entry.
             accBrFdbEntDisp 1.3.6.1.4.1.5.1.1.4.7.1.2
Disposition of received Frame. Note that a Frame is never sent back out on the Port on which it was received.
             accBrFdbEntPort 1.3.6.1.4.1.5.1.1.4.7.1.3
Port to which frame is to be relayed for frame to be forwarded. Has no meaning for other dispositions.
             accBrFdbEntTimer 1.3.6.1.4.1.5.1.1.4.7.1.4
Age of Forwarding Database Entry. A value of zero indicates a static entry.
     accBrFpTable 1.3.6.1.4.1.5.1.1.4.8
A list of Forwarding Priority Entries. Entries are added/deleted via management action.
         accBrFpEntry 1.3.6.1.4.1.5.1.1.4.8.1
Relative Priority between frames to be forwarded on a Bridge Port.
             accBrFpIndex 1.3.6.1.4.1.5.1.1.4.8.1.1
Port number
             accBrFpProt 1.3.6.1.4.1.5.1.1.4.8.1.2
protocol type. Set this object to NULL to delete the entry.
             accBrFpPrio 1.3.6.1.4.1.5.1.1.4.8.1.3
Relative forwarding priority assigned to protocol.
     accBrFpPriDefault 1.3.6.1.4.1.5.1.1.4.9
Default priority to use for protocol types not specifically enumerated in table.
     accBrNumPorts 1.3.6.1.4.1.5.1.1.4.10
Number of physical ports of unit.
     accBrCompress 1.3.6.1.4.1.5.1.1.4.11
Bridge frame compression mode.
     accBrPortFRTable 1.3.6.1.4.1.5.1.1.4.13
           accBrPortFREntry 1.3.6.1.4.1.5.1.1.4.13.1
               accBrPortFRport 1.3.6.1.4.1.5.1.1.4.13.1.1
               accBrPortFRdlci 1.3.6.1.4.1.5.1.1.4.13.1.2
     accBrPortX25Table 1.3.6.1.4.1.5.1.1.4.14
A table of X.25 bridge port parameters.
           accBrPortX25Entry 1.3.6.1.4.1.5.1.1.4.14.1
An entry in the table of X.25 bridge port parameters.
               accBrPortX25port 1.3.6.1.4.1.5.1.1.4.14.1.1
               accBrPortX25addr1 1.3.6.1.4.1.5.1.1.4.14.1.2
               accBrPortX25addr2 1.3.6.1.4.1.5.1.1.4.14.1.3
               accBrPortX25idleTime 1.3.6.1.4.1.5.1.1.4.14.1.4
               accBrPortX25pktNegot 1.3.6.1.4.1.5.1.1.4.14.1.5
               accBrPortX25windowNegot 1.3.6.1.4.1.5.1.1.4.14.1.6
               accBrPortX25FacIndex 1.3.6.1.4.1.5.1.1.4.14.1.7
Index of optional facility string or 0.
     accBrMode 1.3.6.1.4.1.5.1.1.4.15
Bridge mode. When the mode is set to passive, internally generated traffic is forwarded or flooded as appropriate; external traffic is not forwarded to other external ports.
     accBrFilterMode 1.3.6.1.4.1.5.1.1.4.16
When Filter Mode is on, entries in the Filtering table are used to determine the disposition of each frame. When Filter mode is off, no filtering is done.
     accBrFilterDefault 1.3.6.1.4.1.5.1.1.4.17
The default disposition for all received frames when filter mode is ON. Note: When filtering is ON, and the bridge filter table search does NOT provide a match, the default action will be performed.
     accBrFilterTable 1.3.6.1.4.1.5.1.1.4.18
A list of Filtering entries.
           accBrFilterEntry 1.3.6.1.4.1.5.1.1.4.18.1
A Filtering entry which defines Bridge action to be taken based upon the destination AND source MAC Addresses, port number, port protocol and logic op of received frames.
               accBrFilterEntDstMacAddr 1.3.6.1.4.1.5.1.1.4.18.1.1
Destination MAC Address of the Filtering entry.
               accBrFilterEntSrcMacAddr 1.3.6.1.4.1.5.1.1.4.18.1.2
Source MAC Address of the Filtering entry.
               accBrFilterEntDisp 1.3.6.1.4.1.5.1.1.4.18.1.3
Disposition of received Frame. Note that a Frame is never sent back out on the Port on which it was received.
               accBrFilterEntPort 1.3.6.1.4.1.5.1.1.4.18.1.4
In all cases, the destination port of the received frame.
               accBrFilterEntLogicalOp 1.3.6.1.4.1.5.1.1.4.18.1.5
Logical operation to be performed in conjunction with specified protocol. This is an optional parameter.
               accBrFilterEntProtocol 1.3.6.1.4.1.5.1.1.4.18.1.6
Protocol to be used in conjunction with logical operation to determine the disposition of all received packets.
               accBrFilterDiscards 1.3.6.1.4.1.5.1.1.4.18.1.7
The number of packets discarded as a result of bridge filtering. Maintained globally for all ports.
               accBrFilterEntries 1.3.6.1.4.1.5.1.1.4.18.1.8
The number of entries currently in the bridge filtering table. The maximum number of entries is 50.
     accBrFiltIITable 1.3.6.1.4.1.5.1.1.4.19
A list of Filtering entries.
           accBrFiltIIEntry 1.3.6.1.4.1.5.1.1.4.19.1
A Filtering entry which defines the SR action to be taken based upon the destination AND source MAC Addresses AFTER applying the address masks, port number, port protocol and logic op of received frames.
               accBrFiltIIEntDstMacAddr 1.3.6.1.4.1.5.1.1.4.19.1.1
Destination MAC Address of the Filtering entry.
               accBrFiltIIEntSrcMacAddr 1.3.6.1.4.1.5.1.1.4.19.1.2
Source MAC Address of the Filtering entry.
               accBrFiltIIEntDisp 1.3.6.1.4.1.5.1.1.4.19.1.3
Disposition of received Frame. Note that a Frame is never sent back out on the Port on which it was received.
               accBrFiltIIEntPort 1.3.6.1.4.1.5.1.1.4.19.1.4
In all cases, the destination port of the received frame.
               accBrFiltIIEntLogicalOp 1.3.6.1.4.1.5.1.1.4.19.1.5
Logical operation to be performed in conjunction with specified protocol. This is an optional parameter.
               accBrFiltIIEntProtocol 1.3.6.1.4.1.5.1.1.4.19.1.6
Protocol to be used in conjunction with logical operation to determine the disposition of all received packets.
               accBrFiltIIEntDstMacAddrMask 1.3.6.1.4.1.5.1.1.4.19.1.7
Destination MAC Address Mask for the Filtering entry. The mask is ANDed with the Destination address to determine that part of the MAC address which is used in the filtering decision.
               accBrFiltIIEntSrcMacAddrMask 1.3.6.1.4.1.5.1.1.4.19.1.8
Source MAC Address Mask for the Filtering entry. The mask is ANDed with the Source address to determine that part of the MAC address which is used in the filtering decision.
               accBrFiltIIEntStatus 1.3.6.1.4.1.5.1.1.4.19.1.9
0 indicates that the entry is invalid, 1 indicates that the entry is valid.
     accBrFiltIIDiscards 1.3.6.1.4.1.5.1.1.4.20
The number of packets discarded as a result of bridge filtering. Maintained globally for all ports.
     accBrFiltIIEntries 1.3.6.1.4.1.5.1.1.4.21
The number of entries currently in the bridge filtering table. The maximum number of entries is 150.
     accBrFiltPatternTable 1.3.6.1.4.1.5.1.1.4.22
Tok_String
           accBrFiltPatternEntry 1.3.6.1.4.1.5.1.1.4.22.1
               accBrFiltPatternIndex 1.3.6.1.4.1.5.1.1.4.22.1.1
Bridge Pattern Filter Table Index
               accBrFiltPatternPort 1.3.6.1.4.1.5.1.1.4.22.1.2
Bridge Pattern Filter table bridge port
               accBrFiltPatternPath 1.3.6.1.4.1.5.1.1.4.22.1.3
Bridge Pattern Filter table packet direction (input\output).
               accBrFiltPatternByteOff 1.3.6.1.4.1.5.1.1.4.22.1.4
Bridge Pattern Filter table byte offset into the packet.
               accBrFiltPatternMask 1.3.6.1.4.1.5.1.1.4.22.1.5
Bridge Pattern Filter table user defined hex mask.
               accBrFiltPatternCompVal 1.3.6.1.4.1.5.1.1.4.22.1.6
Bridge Pattern Filter table user defined comparison value.
               accBrFiltPatternDisp 1.3.6.1.4.1.5.1.1.4.22.1.7
Bridge Pattern Filter table packet disposition (i.e. forward with priority or discard).
               accBrFiltPatternHitCount 1.3.6.1.4.1.5.1.1.4.22.1.8
Bridge Pattern Filter table filters that have been hit.
               accBrFiltPatternStatus 1.3.6.1.4.1.5.1.1.4.22.1.9
This reads in the status of a user command that defines if the filter is being added or deleted.
     accFdbWhichAddr 1.3.6.1.4.1.5.1.1.4.23
Selects whether the MAC address in the forwarding database is to be compared to the destination or source MAC address in the traffic packets.