ACC-DS3: View SNMP OID List / Download MIB

VENDOR: ACC


 Home MIB: ACC-DS3
Download as:   
ACC-MIB, RFC1155-SMI, ACC-SYSTEM

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 accDs3InfcTable 1.3.6.1.4.1.5.1.1.79
The DS3 interface table.
       accDs3InfcEntry 1.3.6.1.4.1.5.1.1.79.1
An entry in the DS3 interface table.
           accDs3InfcServiceState 1.3.6.1.4.1.5.1.1.79.1.1
Indicates DS3 interface service state. Certain attributes require that the service state be in a certain state before they can be altered.
           accDs3InfcLoopbackOp 1.3.6.1.4.1.5.1.1.79.1.2
The local loopback mode of a DS3 interface. The entire DS3 line can be set or each individual DS1 line within the DS3 can be set separately.
           accDs3InfcLoopbackCO 1.3.6.1.4.1.5.1.1.79.1.3
The loopback state of a DS3 interface when loopback is initiated remotely. A DS3 line can be set, or individual DS1 lines within the DS3 can be set separately.
           accDs3InfcLineLength 1.3.6.1.4.1.5.1.1.79.1.4
The approximate line length. The default is short.
           accDs3InfcMdlProtocol 1.3.6.1.4.1.5.1.1.79.1.5
The terminal to terminal path maintenance data link protocol of the DS3 interface.
           accDs3InfcTxMdlEic 1.3.6.1.4.1.5.1.1.79.1.6
The local MDL equipment identification code for the DS3 interface. Describes the equipment.
           accDs3InfcTxMdlLic 1.3.6.1.4.1.5.1.1.79.1.7
The local MDL location identification code for the DS3 interface. Describes specific location of the equipment.
           accDs3InfcTxMdlFic 1.3.6.1.4.1.5.1.1.79.1.8
The local MDL frame identification code for the DS3 interface. Identifies where the specific piece of equipment is located in a building
           accDs3InfcTxMdlUnit 1.3.6.1.4.1.5.1.1.79.1.9
The local MDL unit identification for the DS3 interface. It identifies where the specific piece of equipment is located within a bay.
           accDs3InfcTxMdlFac 1.3.6.1.4.1.5.1.1.79.1.10
The local MDL facility identification code for the DS3 interface. Describes a specific DS3 path.
           accDs3InfcTxMdlPort 1.3.6.1.4.1.5.1.1.79.1.11
The local MDL port identification code for the DS3 interface. Describes port on the equipment that will initiate the idle signal.
           accDs3InfcTxMdlGen 1.3.6.1.4.1.5.1.1.79.1.12
The local MDL generator number for the DS3 interface. Describes the signal generator that will initiate the test signal.
           accDs3InfcRxMdlEic 1.3.6.1.4.1.5.1.1.79.1.13
The remote MDL equipment identification code for the DS3 interface. Describes the equipment.
           accDs3InfcRxMdlLic 1.3.6.1.4.1.5.1.1.79.1.14
The remote MDL location identification code for the DS3 interface. Describes specific location of the equipment.
           accDs3InfcRxMdlFic 1.3.6.1.4.1.5.1.1.79.1.15
The remote MDL frame identification code for the DS3 interface. Identifies where the specific piece of equipment is located in a building
           accDs3InfcRxMdlUnit 1.3.6.1.4.1.5.1.1.79.1.16
The remote MDL unit identification for the DS3 interface. It identifies where the specific piece of equipment is located within a bay.
           accDs3InfcRxMdlFac 1.3.6.1.4.1.5.1.1.79.1.17
The remote MDL unit identification for the DS3 interface. It identifies where the specific piece of equipment is located within a bay.
           accDs3InfcRxMdlPort 1.3.6.1.4.1.5.1.1.79.1.18
The remote MDL port identification code for the DS3 interface. Describes port on the equipment that will initiate the idle signal.
           accDs3InfcRxMdlGen 1.3.6.1.4.1.5.1.1.79.1.19
The remote MDL generator number for the DS3 interface. Describes the signal generator that will initiate the test signal.
           accDs3InfcRxMdlPathAges 1.3.6.1.4.1.5.1.1.79.1.20
Tok_String
           accDs3InfcRxMdlIdleAges 1.3.6.1.4.1.5.1.1.79.1.21
Tok_String
           accDs3InfcRxMdlTestAges 1.3.6.1.4.1.5.1.1.79.1.22
Tok_String