ACC-DN: View SNMP OID List / Download MIB

VENDOR: ACC


 Home MIB: ACC-DN
Download as:   
ACC-MIB, RFC1155-SMI, ACC-SYSTEM

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 accDn 1.3.6.1.4.1.5.1.1.19
       accDnNumber 1.3.6.1.4.1.5.1.1.19.1
Number of DECNET circuits
       accDnID 1.3.6.1.4.1.5.1.1.19.2
Node ID; Least 10 bits identify the node, six bits above that identify the area.
       accDnMaxNode 1.3.6.1.4.1.5.1.1.19.3
Maximum node number permitted in the local area
       accDnMaxArea 1.3.6.1.4.1.5.1.1.19.4
Maximum area number permitted
       accDnMaxAdjRtr 1.3.6.1.4.1.5.1.1.19.5
Maximum number of adjacent routers
       accDnMaxEndNode 1.3.6.1.4.1.5.1.1.19.6
Maximum number of broadcast endnode adjacencies
       accDnMaxLocHop 1.3.6.1.4.1.5.1.1.19.7
Maximum number of hops allowed within this area
       accDnMaxLocCost 1.3.6.1.4.1.5.1.1.19.8
Maximum cost allowed on a path within this area
       accDnMaxVisit 1.3.6.1.4.1.5.1.1.19.9
Maximum number of node visits allowed for a packet
       accDnMaxForHop 1.3.6.1.4.1.5.1.1.19.10
Maximum number of hops allowed to another area
       accDnMaxForCost 1.3.6.1.4.1.5.1.1.19.11
Maximum cost allowed on a path to another area
       accDnBCT1 1.3.6.1.4.1.5.1.1.19.12
Interval between retranmissions of routing database updates on Broadcast Address
       accDnT1 1.3.6.1.4.1.5.1.1.19.13
Interval between retranmissions of routing database updates non-broadcast
       accDnMsgLev 1.3.6.1.4.1.5.1.1.19.14
Message level for generation of trap messages describing DECNET operational phenonomena See Trap level for description
       accDnNodeState 1.3.6.1.4.1.5.1.1.19.15
Operational state of the node
       accDnUnreachs 1.3.6.1.4.1.5.1.1.19.16
Packets dropped due to node unreachable
       accDnVisitXcds 1.3.6.1.4.1.5.1.1.19.17
Packets dropped due to visits exceeded
       accDnBadNodes 1.3.6.1.4.1.5.1.1.19.18
Packets dropped due to illegal node number
       accDnPktOsizes 1.3.6.1.4.1.5.1.1.19.19
Packets dropped due to oversize packet
       accDnFmtErrs 1.3.6.1.4.1.5.1.1.19.20
Packets dropped due to packet format error
       accDnCktTable 1.3.6.1.4.1.5.1.1.19.21
DECnet circuit table Entries are added/deleted via management action.
             accDnCktEntry 1.3.6.1.4.1.5.1.1.19.21.1
The instance of an entry is the circuit number. Existing entries can be modified.
                 accDnCktIndex 1.3.6.1.4.1.5.1.1.19.21.1.1
Circuit number
                 accDnCktStatus 1.3.6.1.4.1.5.1.1.19.21.1.2
Administrative DECNET state of this circuit
                 accDnCktState 1.3.6.1.4.1.5.1.1.19.21.1.3
Operational DECNET state of this circuit
                 accDnCktCost 1.3.6.1.4.1.5.1.1.19.21.1.4
Administrative circuit cost Object will be set to a circuit-type dependent value if not present in entry-adding SET PDU.
                 accDnMaxRtr 1.3.6.1.4.1.5.1.1.19.21.1.5
Maximum number of routers that can be communicated with over this circuit
                 accDnHelloInt 1.3.6.1.4.1.5.1.1.19.21.1.6
Interval between transmission of Router Hello messages to other DECNET routers on this circuit
                 accDnRtrPriority 1.3.6.1.4.1.5.1.1.19.21.1.7
Priority of this Decnet router to become designated router on this circuit.
                 accDnDesRtrId 1.3.6.1.4.1.5.1.1.19.21.1.8
ID of router which is designated router on this circuit. Lower 10 bits is node number, six bits above that are area number.
                 accDnDesRtrPrio 1.3.6.1.4.1.5.1.1.19.21.1.9
Priority of router which is designated router on this circuit.
                 accDnTrnPktRecs 1.3.6.1.4.1.5.1.1.19.21.1.10
Number of transit packets received on this circuit.
                 accDnTrnPktSnds 1.3.6.1.4.1.5.1.1.19.21.1.11
Number of transit packets sent on this circuit.
                 accDnEndNodePktRecs 1.3.6.1.4.1.5.1.1.19.21.1.12
Number of end-node packets received on this circuit.
                 accDnEndNodePktSnds 1.3.6.1.4.1.5.1.1.19.21.1.13
Number of end-node packets sent on this circuit.
                 accDnCktDowns 1.3.6.1.4.1.5.1.1.19.21.1.14
Number of circuit down events noted on this circuit.
                 accDnCktType 1.3.6.1.4.1.5.1.1.19.21.1.15
Circuit type Object required in entry-adding SET PDU.
                 accDnCktPort 1.3.6.1.4.1.5.1.1.19.21.1.16
Physical port that this circuit is on Object required in entry-adding SET PDU.
                 accDnX25InOutAddr 1.3.6.1.4.1.5.1.1.19.21.1.17
X25 address for other end of circuit; well send to this address and will accept packets from this address for this circuit. Object required in entry-adding SET PDU if circuit type is X.25
                 accDnX25InAddr 1.3.6.1.4.1.5.1.1.19.21.1.18
Packets from this address are accepted on this circuit. Object will be set to default value if not present in entry-adding SET PDU.
                 accDnX25Idle 1.3.6.1.4.1.5.1.1.19.21.1.19
Maximum idle time before this circuit is considered unused. Object will be set to default value if not present in entry-adding SET PDU.
                 accDnX25PktVal 1.3.6.1.4.1.5.1.1.19.21.1.20
Maximum X25 packet size Object will be set to default value if not present in entry-adding SET PDU.
                 accDnX25PktWin 1.3.6.1.4.1.5.1.1.19.21.1.21
X25 packet window Object will be set to default value if not present in entry-adding SET PDU.
                 accDnEntryStatus 1.3.6.1.4.1.5.1.1.19.21.1.22
Setting this object to invalid deletes entry
                 accDnX25FacIndex 1.3.6.1.4.1.5.1.1.19.21.1.23
Index of optional facility string or 0.
       accDnRtTable 1.3.6.1.4.1.5.1.1.19.22
DECnet routing table
             accDnRtEntry 1.3.6.1.4.1.5.1.1.19.22.1
Detail on specific route
                 accDnRtNode 1.3.6.1.4.1.5.1.1.19.22.1.1
Destination node
                 accDnRtHops 1.3.6.1.4.1.5.1.1.19.22.1.2
Number of hops to destination
                 accDnRtCost 1.3.6.1.4.1.5.1.1.19.22.1.3
Cost to destination
                 accDnRtCkt 1.3.6.1.4.1.5.1.1.19.22.1.4
Circuit number to use to get to destination
                 accDnRtNextHop 1.3.6.1.4.1.5.1.1.19.22.1.5
Next router along the way to destination
       accDnAreaTable 1.3.6.1.4.1.5.1.1.19.23
DECnet area table.
             accDnAreaEntry 1.3.6.1.4.1.5.1.1.19.23.1
Details on specific area
                 accDnAreaArea 1.3.6.1.4.1.5.1.1.19.23.1.1
Remote area
                 accDnAreaHops 1.3.6.1.4.1.5.1.1.19.23.1.2
Hops to Remote area
                 accDnAreaCost 1.3.6.1.4.1.5.1.1.19.23.1.3
Cost to Remote area
                 accDnAreaCkt 1.3.6.1.4.1.5.1.1.19.23.1.4
Circuit over which remote area can be reached.
                 accDnAreaNextHop 1.3.6.1.4.1.5.1.1.19.23.1.5
Next hop to remote area.
       accDnRouteFilterTable 1.3.6.1.4.1.5.1.1.19.24
The DECNET IV Routes that the Network Manager wants to be careful about.
             accDnRouteFilterEntry 1.3.6.1.4.1.5.1.1.19.24.1
A single controlled DECNET Route.
                 accDnRouteFilterAdj 1.3.6.1.4.1.5.1.1.19.24.1.1
If 0, all adjacent systems. If a DECNET Area with host id 0, all adjacent systems in that area. If a DECNET Host ID, that adjacent system.
                 accDnRouteFilterNode 1.3.6.1.4.1.5.1.1.19.24.1.2
If 0, all routing information. If a DECNET Area with Host ID 0, relevant level 2 routing information. If a DECNET Host ID, level 1 routing informa- tion for that host.
                 accDnRouteFilterDisposition 1.3.6.1.4.1.5.1.1.19.24.1.3
This variable indicates what to do with the indicated routing information. Where overlaps occur (accept no routing information from area 3.0 except from router 3.27), the most specif- ic match applies.
                 accDnRouteFilterEntStat 1.3.6.1.4.1.5.1.1.19.24.1.4
setting this variable to invalid has the ef- fect of invalidating it as of the next system reset.
       accDnForwardFilterTable 1.3.6.1.4.1.5.1.1.19.25
The DECNET traffic that the Network Manager wants selectively treated.
             accDnForwardFilterEntry 1.3.6.1.4.1.5.1.1.19.25.1
A single set of messages that the Network Manager wants selectively treated.
                 accDnForwardFilterDest 1.3.6.1.4.1.5.1.1.19.25.1.1
If 0, all DECNET Addresses. If an Area with Host Part 0, all traffic to that Area. If a DECNET Host ID, all traffic to that Host.
                 accDnForwardFilterSource 1.3.6.1.4.1.5.1.1.19.25.1.2
If 0, all DECNET Traffic. If an Area with Host Part 0, all traffic from that Area. If a DECNET Host ID, all traffic from that Host.
                 accDnForwardFilterDisposition 1.3.6.1.4.1.5.1.1.19.25.1.3
This variable indicates what is to be done with traffic from accDnForwardFilterSource to accDnForwardFilterDest. When overlaps occur (discard all traffic from Area 4.0 to Anywhere except traffic from Host 4.123), the most specific match applies.
                 accDnForwardFilterEntStat 1.3.6.1.4.1.5.1.1.19.25.1.4
setting accDnForwardFilterEntStat to invalid has the effect of removing the filter on the next system reset.
       accDnAdjTable 1.3.6.1.4.1.5.1.1.19.26
The set of systems adjacent to this router.
             accDnAdjEntry 1.3.6.1.4.1.5.1.1.19.26.1
One of the systems adjacent to this router.
                 accDnAdjNode 1.3.6.1.4.1.5.1.1.19.26.1.1
The Host Identifier of the adjacent node.
                 accDnAdjType 1.3.6.1.4.1.5.1.1.19.26.1.2
The type of DECNET adjacency being sustained.
                 accDnAdjCircuit 1.3.6.1.4.1.5.1.1.19.26.1.3
The DECNET Circuit Number.
                 accDnAdjState 1.3.6.1.4.1.5.1.1.19.26.1.4
The state of the adjacency.