ZYXEL-SFLOW-MIB: View SNMP OID List / Download MIB

VENDOR: ZYXEL COMMUNICATIONS CORP.


 Home MIB: ZYXEL-SFLOW-MIB
Download as:   
SNMPv2-CONF, ZYXEL-ES-SMI, SNMPv2-SMI, P-BRIDGE-MIB, INET-ADDRESS-MIB, BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zyxelSflow 1.3.6.1.4.1.890.1.15.3.75
The subtree for sFlow
       zyxelSflowSetup 1.3.6.1.4.1.890.1.15.3.75.1
           zySflowState 1.3.6.1.4.1.890.1.15.3.75.1.1 enabledstatus read-write
Enable/Disable sflow on the switch. sFlow (RFC 3176) is a standard technology for monitoring switched networks. An sFlow agent embedded on a switch or router gets sample data and packet statistics from traffic forwarded through its ports. The sFlow agent then creates sFlow data and sends it to an sFlow collector. The sFlow collector is a server that collects and analyzes sFlow datagram. An sFlow datagram includes packet header, input and output interface, sampling process parameters and forwarding information. sFlow minimizes impact on CPU load of the switch as it analyzes sample data only. sFlow can continuously monitor network traffic and create reports for network performance analysis and troubleshooting. For example, you can use it to know which IP address or which type of traffic caused network congestion.
           zySflowMaxNumberOfCollectors 1.3.6.1.4.1.890.1.15.3.75.1.2 integer read-only
The maximum number of sFlow collectors entries that can be created.
           zyxelSflowCollectorTable 1.3.6.1.4.1.890.1.15.3.75.1.3 no-access
The table contains sFlow collector configuration.
               zyxelSflowCollectorEntry 1.3.6.1.4.1.890.1.15.3.75.1.3.1 no-access
An entry contains sFlow collector configuration.
                   zySflowCollectorIpAddressType 1.3.6.1.4.1.890.1.15.3.75.1.3.1.1 inetaddresstype no-access
The Type of IP address for sflow collector entry.
                   zySflowCollectorIpAddress 1.3.6.1.4.1.890.1.15.3.75.1.3.1.2 inetaddress no-access
The IP address of the sFlow collector.
                   zySflowCollectorUdpPort 1.3.6.1.4.1.890.1.15.3.75.1.3.1.3 integer read-write
Enter a UDP port number the Switch uses to send sFlow datagram to the collector. If you change the port here, make sure you change it on the collector, too. The default port is 6343.
                   zySflowCollectorRowStatus 1.3.6.1.4.1.890.1.15.3.75.1.3.1.4 rowstatus read-only
This object allow entry to be create and deleted a sFlow collector entry.
           zyxelSflowPortTable 1.3.6.1.4.1.890.1.15.3.75.1.4 no-access
The table contains sFlow port configuration.
               zyxelSflowPortEntry 1.3.6.1.4.1.890.1.15.3.75.1.4.1 no-access
An entry contains sFlow port configuration.
                   zySflowPortState 1.3.6.1.4.1.890.1.15.3.75.1.4.1.1 enabledstatus read-write
Enable/Disable sflow on the port.
           zySflowMaxNumberOfPortCollectors 1.3.6.1.4.1.890.1.15.3.75.1.5 integer read-only
The maximum number of sFlow port collectors entries that can be created.
           zyxelSflowPortCollectorTable 1.3.6.1.4.1.890.1.15.3.75.1.6 no-access
The table contains sFlow port collector configuration.
               zyxelSflowPortCollectorEntry 1.3.6.1.4.1.890.1.15.3.75.1.6.1 no-access
An entry contains sFlow port collector configuration.
                   zySflowPortCollectorIpAddressType 1.3.6.1.4.1.890.1.15.3.75.1.6.1.1 inetaddresstype no-access
The Type of IP address for sflow port collector entry.
                   zySflowPortCollectorIpAddress 1.3.6.1.4.1.890.1.15.3.75.1.6.1.2 inetaddress no-access
The IP address of the sFlow port collector.
                   zySflowPortCollectorSampleRate 1.3.6.1.4.1.890.1.15.3.75.1.6.1.3 integer read-write
Enter a number (N) from 256 to 65535. The switch captures every one out of N packets for this port and creates sFlow datagram.
                   zySflowPortCollectorPollInterval 1.3.6.1.4.1.890.1.15.3.75.1.6.1.4 integer read-write
Specify a time interval (from 20 to 120 in seconds) the switch waits before sending the sFlow datagram and packet counters for this port to the collector.
                   zySflowPortCollectorRowStatus 1.3.6.1.4.1.890.1.15.3.75.1.6.1.5 rowstatus read-only
This object allows a sFlow port collector entry to be created and deleted.