ZYXEL-MULTICAST-MIB: View SNMP OID List / Download MIB

VENDOR: ZYXEL COMMUNICATIONS CORP.


 Home MIB: ZYXEL-MULTICAST-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, ZYXEL-ES-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zyxelMulticast 1.3.6.1.4.1.890.1.15.3.54
The subtree for multicast
       zyxelMulticastSetup 1.3.6.1.4.1.890.1.15.3.54.1
           zyMulticastUnknownMulticastFrameForwarding 1.3.6.1.4.1.890.1.15.3.54.1.1 integer read-write
Specify the action to perform when the switch receives an unknown multicast frame. Unknown multicast frames are addressed to multicast groups for which the Switch has not recorded any group members. Select Drop to discard the frame(s). Select Flooding to send the frame(s) to all ports of the same domain. Enumeration: 'drop': 2, 'flooding': 1.
           zyMulticastReservedMulticastFrameForwarding 1.3.6.1.4.1.890.1.15.3.54.1.2 integer read-write
The IP address range of 224.0.0.0 to 224.0.0.255 are reserved for multicasting on the local network only. For example, 224.0.0.1 is for all hosts on a local network segment and 224.0.0.9 is used to send RIP routing information to all RIP v2 routers on the same network segment. A multicast router will not forward a packet with the destination IP address within this range to other networks. See the IANA web site for more information. The layer-2 multicast MAC addresses are also included in this group. Specify the action to perform when the Switch receives a frame with a reserved multicast address. Select Drop to discard the frame(s). Select Flooding to send the frame(s) to all ports of the same domain. Enumeration: 'drop': 2, 'flooding': 1.