ZYXEL-MSTP-MIB: View SNMP OID List / Download MIB

VENDOR: ZYXEL COMMUNICATIONS CORP.


 Home MIB: ZYXEL-MSTP-MIB
Download as:   
SNMPv2-CONF, ZYXEL-ES-SMI, SNMPv2-SMI, P-BRIDGE-MIB, BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zyxelMstp 1.3.6.1.4.1.890.1.15.3.53
The subtree for Multiple Spanning Tree Protocol (MSTP)
       zyxelMstpSetup 1.3.6.1.4.1.890.1.15.3.53.1
           zyxelMstpGeneral 1.3.6.1.4.1.890.1.15.3.53.1.1
               zyMstpGeneralState 1.3.6.1.4.1.890.1.15.3.53.1.1.1 enabledstatus read-write
Enable/Disable MSTP on the switch.
               zyMstpGeneralConfigIdName 1.3.6.1.4.1.890.1.15.3.53.1.1.2 displaystring read-write
The configuration name that identifies the MST region and is used as one of the inputs in the computation of the MST Configuration Identifier.
               zyMstpGeneralConfigIdRevisionLevel 1.3.6.1.4.1.890.1.15.3.53.1.1.3 integer32 read-write
This object identifies the MST revision that identifies the MST region and is used as one of the inputs in the computation of the MST configuration Identifier.
               zyMstpGeneralHelloTime 1.3.6.1.4.1.890.1.15.3.53.1.1.4 timeout read-write
The time interval in seconds between BPDU configuration message generations by the root switch. The allowed range is 1 to 10 seconds.
               zyMstpGeneralMaxAge 1.3.6.1.4.1.890.1.15.3.53.1.1.5 timeout read-write
This is the maximum time (in seconds) the switch can wait without receiving a BPDU before attempting to reconfigure
               zyMstpGeneralForwardDelay 1.3.6.1.4.1.890.1.15.3.53.1.1.6 timeout read-write
This is the maximum time (in seconds) the switch will wait before changing states. This delay is required because every switch must receive information about topology changes before it starts to forward frames.
               zyMstpGeneralMaxHops 1.3.6.1.4.1.890.1.15.3.53.1.1.7 integer32 read-write
The number of hops (between 1 and 255) in an MSTP region before the BPDU is discarded and the port information is aged.
           zyMstpVlanMapMaxNumberOfInstances 1.3.6.1.4.1.890.1.15.3.53.1.2 integer read-only
The maximum number of MSTP VLAN instances that can be created.
           zyxelMstpVlanMapTable 1.3.6.1.4.1.890.1.15.3.53.1.3 no-access
The table contains MSTP VLAN map configuration.
               zyxelMstpVlanMapEntry 1.3.6.1.4.1.890.1.15.3.53.1.3.1 no-access
An entry contains MSTP VLAN map configuration.
                   zyMstpVlanMapInstance 1.3.6.1.4.1.890.1.15.3.53.1.3.1.1 mstiorcistinstanceindex no-access
Uniquely identifies an instance. The entry of this table with index 0 presents always, represents CIST. When SET operation
                   zyMstpVlanMapVlans1k 1.3.6.1.4.1.890.1.15.3.53.1.3.1.2 octet string read-write
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not mandatory.
                   zyMstpVlanMapVlans2k 1.3.6.1.4.1.890.1.15.3.53.1.3.1.3 octet string read-write
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not mandatory.
                   zyMstpVlanMapVlans3k 1.3.6.1.4.1.890.1.15.3.53.1.3.1.4 octet string read-write
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not mandatory.
                   zyMstpVlanMapVlans4k 1.3.6.1.4.1.890.1.15.3.53.1.3.1.5 octet string read-write
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. Empty (zero) most significant octes are not mandatory.
                   zyMstpVlanMapRowStatus 1.3.6.1.4.1.890.1.15.3.53.1.3.1.6 rowstatus read-only
This object allow entries to be created and deleted from the MSTP VLAN map table.
           zyxelMstpPortTable 1.3.6.1.4.1.890.1.15.3.53.1.4 no-access
The table contains MSTP port configuration.
               zyxelMstpPortEntry 1.3.6.1.4.1.890.1.15.3.53.1.4.1 no-access
An entry contains MSTP port configuration.
                   zyMstpPortAdminEdgePort 1.3.6.1.4.1.890.1.15.3.53.1.4.1.1 integer read-write
The administrative value of the Edge Port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) indicates that this port should be assumed as a non-edge-port. Enumeration: 'false': 2, 'true': 1.
           zyxelMstpInstanceTable 1.3.6.1.4.1.890.1.15.3.53.1.5 no-access
The table contains MSTP instance configuration.
               zyxelMstpInstanceEntry 1.3.6.1.4.1.890.1.15.3.53.1.5.1 no-access
An entry contains MSTP instance configuration.
                   zyMstpInstanceId 1.3.6.1.4.1.890.1.15.3.53.1.5.1.1 mstiorcistinstanceindex no-access
The number you want to use to identify this MST instance on the switch. 0 means CIST.
                   zyMstpInstanceBridgePriority 1.3.6.1.4.1.890.1.15.3.53.1.5.1.2 integer32 read-write
priority of the switch for the specific spanning tree instance. The lower the number , the more likely the switch will be chosen as the root bridge within the spanning tree instance. In steps of 4096.
           zyxelMstpInstancePortTable 1.3.6.1.4.1.890.1.15.3.53.1.6 no-access
The table contains MSTP instance port configuration.
               zyxelMstpInstancePortEntry 1.3.6.1.4.1.890.1.15.3.53.1.6.1 no-access
An entry contains MSTP instance port configuration.
                   zyMstpInstancePortInstanceId 1.3.6.1.4.1.890.1.15.3.53.1.6.1.1 mstiorcistinstanceindex no-access
The number you want to use to identify this MST instance on the switch. 0 means CIST.
                   zyMstpInstancePortState 1.3.6.1.4.1.890.1.15.3.53.1.6.1.2 enabledstatus read-write
Enable/Disable this port to the MST instance.
                   zyMstpInstancePortPriority 1.3.6.1.4.1.890.1.15.3.53.1.6.1.3 integer32 read-write
Port priority. Priority decides which port should be disable when more than one port forms a loop in a switch. Ports with a higher priority numeric value are disabled first. In steps of 16.
                   zyMstpInstancePortPathCost 1.3.6.1.4.1.890.1.15.3.53.1.6.1.4 integer read-write
The cost of transmitting a frame on to a LAN through that port.
       zyxelMstpStatus 1.3.6.1.4.1.890.1.15.3.53.2
           zyxelMstpInfoGeneral 1.3.6.1.4.1.890.1.15.3.53.2.1
               zyMstpInfoGeneralConfigIdName 1.3.6.1.4.1.890.1.15.3.53.2.1.1 displaystring read-only
The configuration name that identifies the MST region and is used as one of the inputs in the computation of the MST Configuration Identifier.
               zyMstpInfoGeneralConfigIdRevisionLevel 1.3.6.1.4.1.890.1.15.3.53.2.1.2 integer32 read-only
This object identifies the MST revision that identifies the MST region and is used as one of the inputs in the computation of the MST configuration Identifier.
               zyMstpInfoGeneralConfigIdConfigDigest 1.3.6.1.4.1.890.1.15.3.53.2.1.3 octet string read-only
A configuration digest is generated from the VLAN-MSTI mapping information. This field displays the 16-octet signature that is included in an MSTP BPDU. This field displays the digest when MSTP is activated on the system.
               zyMstpInfoGeneralHelloTime 1.3.6.1.4.1.890.1.15.3.53.2.1.4 timeout read-only
The time interval in seconds between BPDU configuration message generations by the root switch.
               zyMstpInfoGeneralMaxAge 1.3.6.1.4.1.890.1.15.3.53.2.1.5 timeout read-only
This is the maximum time (in seconds) the switch can wait without receiving a BPDU before attempting to reconfigure
               zyMstpInfoGeneralForwardDelay 1.3.6.1.4.1.890.1.15.3.53.2.1.6 timeout read-write
This is the maximum time (in seconds) the switch will wait before changing states. This delay is required because every switch must receive information about topology changes before it starts to forward frames.
               zyMstpInfoGeneralCistRootPathCost 1.3.6.1.4.1.890.1.15.3.53.2.1.7 integer32 read-only
This is the path cost from the root port on this switch to the root switch.
               zyMstpInfoGeneralCistRootBridgeId 1.3.6.1.4.1.890.1.15.3.53.2.1.8 octet string read-only
This is the path cost from the root port on this switch to the root switch.
           zyxelMstpInfoVlanMapTable 1.3.6.1.4.1.890.1.15.3.53.2.2 no-access
The table contains MSTP VLAN map information.
               zyxelMstpInfoVlanMapEntry 1.3.6.1.4.1.890.1.15.3.53.2.2.1 no-access
An entry contains MSTP VLAN map information.
                   zyMstpInfoVlanMapVid 1.3.6.1.4.1.890.1.15.3.53.2.2.1.1 integer no-access
The VLAN ID for which this entry contains the instance mapped.
                   zyMstpInfoVlanMapInstance 1.3.6.1.4.1.890.1.15.3.53.2.2.1.2 mstiorcistinstanceindex read-only
An integer with values ranging from 0 to 64 that identify a the CIST/MSTI instance to which this VLAN is mapped
           zyxelMstpInfoPortTable 1.3.6.1.4.1.890.1.15.3.53.2.3 no-access
The table contains MSTP VLAN map information.
               zyxelMstpInfoPortEntry 1.3.6.1.4.1.890.1.15.3.53.2.3.1 no-access
An entry contains MSTP VLAN map information.
                   zyMstpInfoPortOperEdgePort 1.3.6.1.4.1.890.1.15.3.53.2.3.1.1 truthvalue read-only
The operational value of the Edge Port parameter. The object is initialized to the value of the corresponding instance of zyxelMstpPortAdminEdgePort. When the corresponding instance of zyxelMstpPortAdminEdgePort is set, this object will be changed as well. This object will also be changed to false on reception of a BPDU.
                   zyMstpInfoPortOperPointToPointMAC 1.3.6.1.4.1.890.1.15.3.53.2.3.1.2 truthvalue read-only
The port is operationally connected to a point-to-point link.
           zyxelMstpInfoInstanceTable 1.3.6.1.4.1.890.1.15.3.53.2.4 no-access
The table contains MSTP instance information.
               zyxelMstpInfoInstanceEntry 1.3.6.1.4.1.890.1.15.3.53.2.4.1 no-access
An entry contains MSTP instance information.
                   zyMstpInfoInstanceId 1.3.6.1.4.1.890.1.15.3.53.2.4.1.1 mstiorcistinstanceindex no-access
the number you want to use to identify this MST instance on the switch. 0 means CIST.
                   zyMstpInfoInstanceBridgeId 1.3.6.1.4.1.890.1.15.3.53.2.4.1.2 bridgeid read-only
this is the unique identifier for this bridge, consisting of bridge priority plus MAC address. This ID is the same for root and our bridge if the switch is the root switch.
                   zyMstpInfoInstanceInternalRootCost 1.3.6.1.4.1.890.1.15.3.53.2.4.1.3 integer32 read-only
This is the path cost from the root port in this MST instance to the regional root switch.
                   zyMstpInfoInstanceRootPort 1.3.6.1.4.1.890.1.15.3.53.2.4.1.4 integer read-only
This is the priority and number of the port on the switch through which this switch must communicate with the root of the MST instance.
                   zyMstpInfoInstanceTimeSinceTopologyChange 1.3.6.1.4.1.890.1.15.3.53.2.4.1.5 timeticks read-only
This is the time since the spanning tree was last reconfigured.
                   zyMstpInfoInstanceTopologyChangesCount 1.3.6.1.4.1.890.1.15.3.53.2.4.1.6 counter32 read-only
This is the number of times the spanning tree has been reconfigured.
           zyxelMstpInfoInstancePortTable 1.3.6.1.4.1.890.1.15.3.53.2.5 no-access
The table contains MSTP instance port information.
               zyxelMstpInfoInstancePortEntry 1.3.6.1.4.1.890.1.15.3.53.2.5.1 no-access
An entry contains MSTP instance port information.
                   zyMstpInfoInstancePortInstanceId 1.3.6.1.4.1.890.1.15.3.53.2.5.1.1 mstiorcistinstanceindex no-access
The number you want to use to identify this MST instance on the switch. 0 means CIST.
                   zyMstpInfoInstancePortPathCost 1.3.6.1.4.1.890.1.15.3.53.2.5.1.2 integer read-only
The cost of transmitting a frame on to a LAN through that port.
                   zyMstpInfoInstancePortState 1.3.6.1.4.1.890.1.15.3.53.2.5.1.3 integer read-only
STP assigns five port states to eliminate packet looping. A bridge port is not allowed to go directly from blocking state to forwarding state so as to eliminate transient loops. Enumeration: 'disabled': 0, 'discarding': 1, 'forwarding': 3, 'learning': 2, 'unknown': 4.
                   zyMstpInfoInstancePortDesignatedRoot 1.3.6.1.4.1.890.1.15.3.53.2.5.1.4 bridgeid read-only
The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.
                   zyMstpInfoInstancePortDesignatedCost 1.3.6.1.4.1.890.1.15.3.53.2.5.1.5 integer32 read-only
The path cost of the Designated Port is connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
                   zyMstpInfoInstancePortDesignatedBridge 1.3.6.1.4.1.890.1.15.3.53.2.5.1.6 bridgeid read-only
The Bridge Identifier of the bridge that this port considers to be the Designated Bridge for this port's segment.
                   zyMstpInfoInstancePortDesignatedPort 1.3.6.1.4.1.890.1.15.3.53.2.5.1.7 integer read-only
The Port Identifier of the port on the Designated Bridge for this port's segment.
       zyxelMstpNotifications 1.3.6.1.4.1.890.1.15.3.53.3
           zyMstpNewRoot 1.3.6.1.4.1.890.1.15.3.53.3.1
The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree; the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the Topology Change Timer, immediately subsequent to its election. Implementation of this trap is optional.
           zyMstpTopologyChange 1.3.6.1.4.1.890.1.15.3.53.3.2
A topologyChange is sent if the topology changed of MSTP has detected.