ZYXEL-LOOPGUARD-MIB: View SNMP OID List / Download MIB

VENDOR: ZYXEL COMMUNICATIONS CORP.


 Home MIB: ZYXEL-LOOPGUARD-MIB
Download as:   
SNMPv2-CONF, ZYXEL-ES-SMI, IF-MIB, SNMPv2-SMI, P-BRIDGE-MIB, BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zyxelLoopGuard 1.3.6.1.4.1.890.1.15.3.45
The subtree for loop guard
       zyxelLoopGuardSetup 1.3.6.1.4.1.890.1.15.3.45.1
           zyLoopGuardState 1.3.6.1.4.1.890.1.15.3.45.1.1 enabledstatus read-write
Enable/Disable loop guard on the switch. Loop guard allows you to configure the switch to shut down a port if it detects that packets sent out on that port loop back to the switch. Loop guard is designed to handle loop problems on the edge of your network. This can occur when a port is connected to a switch that is in a loop state. Loop state occurs as a result of human error. For example, it happens when two ports on a switch are connected with the same cable. When a switch in loop state sends out broadcast messages the messages loop back to the switch and are re-broadcast again and again causing a broadcast storm.
           zyxelLoopGuardPortTable 1.3.6.1.4.1.890.1.15.3.45.1.2 no-access
The table contains loop guard port configuration.
               zyxelLoopGuardPortEntry 1.3.6.1.4.1.890.1.15.3.45.1.2.1 no-access
An entry contains loop guard port configuration.
                   zyLoopGuardPortState 1.3.6.1.4.1.890.1.15.3.45.1.2.1.1 enabledstatus read-write
Enable/Disable loop guard on the port.
       zyxelLoopGuardNotifications 1.3.6.1.4.1.890.1.15.3.45.2
           zyLoopGuardLoopDetect 1.3.6.1.4.1.890.1.15.3.45.2.1
Loop guard shuts down the port for loop is detected.