ZYXEL-AclV2-MIB: View SNMP OID List / Download MIB

VENDOR: ZYXEL COMMUNICATIONS CORP.


 Home MIB: ZYXEL-AclV2-MIB
Download as:   
SNMPv2-CONF, ZYXEL-ES-SMI, SNMPv2-SMI, P-BRIDGE-MIB, INET-ADDRESS-MIB, Q-BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zyxelAclV2 1.3.6.1.4.1.890.1.15.3.105
The subtree for access control list (ACL) version 2
         zyxelAclV2ClassifierStatus 1.3.6.1.4.1.890.1.15.3.105.1
             zyxelAclV2ClassifierTable 1.3.6.1.4.1.890.1.15.3.105.1.1 no-access
The table contains classifier general configuration and information.
                 zyxelAclV2ClassifierEntry 1.3.6.1.4.1.890.1.15.3.105.1.1.1 no-access
An entry contains classifier general configuration and information.
                     zyAclV2ClassifierName 1.3.6.1.4.1.890.1.15.3.105.1.1.1.1 displaystring no-access
The name of classifier rule is used for identifying purposes.
                     zyAclV2ClassifierState 1.3.6.1.4.1.890.1.15.3.105.1.1.1.2 enabledstatus read-only
Enable/Disable classifier rule on this switch.
                     zyAclV2ClassifierWeight 1.3.6.1.4.1.890.1.15.3.105.1.1.1.3 integer read-only
Weght value for classifier rule, 0~65535. Default 32767. When the match order is manual, the higher weight the higher priorit When the match order is auto, the priority depends on the depth of qualifier.
                     zyAclV2ClassifierCountState 1.3.6.1.4.1.890.1.15.3.105.1.1.1.4 enabledstatus read-only
Enable/disable count on this classifier rule. To Enable counting the matched packet number of this rule.
                     zyAclV2ClassifierLogState 1.3.6.1.4.1.890.1.15.3.105.1.1.1.5 enabledstatus read-only
Enable/disable log on this classifier rule. To Enable recording the matched packet number of this rule in a configurable time interval.
                     zyAclV2ClassifierTimeRange 1.3.6.1.4.1.890.1.15.3.105.1.1.1.6 displaystring read-only
Time Range Name for classifier rule. Bind a time range profile with this rule to active this rule in specific time.
                     zyAclV2ClassifierMatchCount 1.3.6.1.4.1.890.1.15.3.105.1.1.1.7 counter64 read-only
Match-Count of this classifier rule. It will show the matched packet count of this rule if zyAclV2ClassifierCount is enabled.
             zyxelAclV2ClassifierEthernetTable 1.3.6.1.4.1.890.1.15.3.105.1.2 no-access
The table contains classifier ethernet configuration.
                 zyxelAclV2ClassifierEthernetEntry 1.3.6.1.4.1.890.1.15.3.105.1.2.1 no-access
An entry contains classifier ethernet configuration.
                     zyAclV2ClassifierEthernetSourcePorts 1.3.6.1.4.1.890.1.15.3.105.1.2.1.1 portlist read-only
Source Port List for classifier rule.
                     zyAclV2ClassifierEthernetSourceTrunks 1.3.6.1.4.1.890.1.15.3.105.1.2.1.2 portlist read-only
Source Trunk List for classifier rule.
                     zyAclV2ClassifierEthernetPacketFormat 1.3.6.1.4.1.890.1.15.3.105.1.2.1.3 integer read-only
Packet format for classifier rule. A value of 802.3 indicates that the packets are formatted according to the IEEE 802.3 standards. A value of Ethernet II indicates that the packets are formatted according to RFC 894, Ethernet II encapsulation. Enumeration: 'ethernetIIUntagged': 2, 'ethernet802dot3Tagged': 5, 'all': 1, 'ethernet802dot3Untagged': 4, 'ethernetIITagged': 3.
                     zyAclV2ClassifierEthernet8021pPriority 1.3.6.1.4.1.890.1.15.3.105.1.2.1.4 integer read-only
802.1p priority for classifier rule. 0~7. The range is 0~7 and value -1 means any priority level.
                     zyAclV2ClassifierEthernetInner8021pPriority 1.3.6.1.4.1.890.1.15.3.105.1.2.1.5 integer read-only
Inner 802.1p priority for classifier rule, 0~7. Value -1 means any priority level.
                     zyAclV2ClassifierEthernetType 1.3.6.1.4.1.890.1.15.3.105.1.2.1.6 integer read-only
Ethernet type for classifier rule. It is represented in decimal expression and value 65535 means any Ethernet type.
                     zyAclV2ClassifierEthernetSourceMacAddress 1.3.6.1.4.1.890.1.15.3.105.1.2.1.7 macaddress read-only
Source MAC address for classifier rule. 00:00:00:00:00:00 means any source MAC address.
                     zyAclV2ClassifierEthernetSourceMACMask 1.3.6.1.4.1.890.1.15.3.105.1.2.1.8 macaddress read-only
Source MAC Mask for classifier rule.
                     zyAclV2ClassifierEthernetDestinationMacAddress 1.3.6.1.4.1.890.1.15.3.105.1.2.1.9 macaddress read-only
Destination MAC address for classifier rule. 00:00:00:00:00:00 means any destination MAC address.
                     zyAclV2ClassifierEthernetDestinationMACMask 1.3.6.1.4.1.890.1.15.3.105.1.2.1.10 macaddress read-only
Destination MAC Mask for classifier rule.
             zyxelAclV2ClassifierVlanTable 1.3.6.1.4.1.890.1.15.3.105.1.3 no-access
An entry contains classifier VLAN configuration.
                 zyxelAclV2ClassifierVlanEntry 1.3.6.1.4.1.890.1.15.3.105.1.3.1 no-access
An entry contains classifier VLAN configuration.
                     zyAclV2ClassifierVlanMap1k 1.3.6.1.4.1.890.1.15.3.105.1.3.1.1 octet string read-only
VLAN ID List for classifer rule. range : 1~4094.
                     zyAclV2ClassifierVlanMap2k 1.3.6.1.4.1.890.1.15.3.105.1.3.1.2 octet string read-only
VLAN ID List for classifer rule. range : 1~4094.
                     zyAclV2ClassifierVlanMap3k 1.3.6.1.4.1.890.1.15.3.105.1.3.1.3 octet string read-only
VLAN ID List for classifer rule. range : 1~4094.
                     zyAclV2ClassifierVlanMap4k 1.3.6.1.4.1.890.1.15.3.105.1.3.1.4 octet string read-only
VLAN ID List for classifer rule. range : 1~4094.
             zyxelAclV2ClassifierInnerVlanTable 1.3.6.1.4.1.890.1.15.3.105.1.4 no-access
An entry contains classifier inner VLAN configuration.
                 zyxelAclV2ClassifierInnerVlanEntry 1.3.6.1.4.1.890.1.15.3.105.1.4.1 no-access
An entry contains classifier inner VLAN configuration.
                     zyAclV2ClassifierInnerVlanMap1k 1.3.6.1.4.1.890.1.15.3.105.1.4.1.1 octet string read-only
inner VLAN ID List for classifer rule. range : 1~4094.
                     zyAclV2ClassifierInnerVlanMap2k 1.3.6.1.4.1.890.1.15.3.105.1.4.1.2 octet string read-only
inner VLAN ID List for classifer rule. range : 1~4094.
                     zyAclV2ClassifierInnerVlanMap3k 1.3.6.1.4.1.890.1.15.3.105.1.4.1.3 octet string read-only
inner VLAN ID List for classifer rule. range : 1~4094.
                     zyAclV2ClassifierInnerVlanMap4k 1.3.6.1.4.1.890.1.15.3.105.1.4.1.4 octet string read-only
inner VLAN ID List for classifer rule. range : 1~4094.
             zyxelAclV2ClassifierIpTable 1.3.6.1.4.1.890.1.15.3.105.1.5 no-access
The table contains classifier IP configuration.
                 zyxelAclV2ClassifierIpEntry 1.3.6.1.4.1.890.1.15.3.105.1.5.1 no-access
An entry contains classifier IP configuration.
                     zyAclV2ClassifierIpPacketLenRangeStart 1.3.6.1.4.1.890.1.15.3.105.1.5.1.1 integer read-only
The Start value of IP packet length range, 0~65535. And it must smaller then the zyAclV2ClassifierIpPacketLenRangeEnd. Value -1 means any start value.
                     zyAclV2ClassifierIpPacketLenRangeEnd 1.3.6.1.4.1.890.1.15.3.105.1.5.1.2 integer read-only
The End value of IP packet length range, 0~65535. And it must larger then the zyAclV2ClassifierIpPacketLenRangeStart. Value -1 means any start value.
                     zyAclV2ClassifierIpDSCP 1.3.6.1.4.1.890.1.15.3.105.1.5.1.3 integer read-only
DSCP (DiffServ Code Point) for classifier rule. The range is 0~63 and value -1 means any DSCP.
                     zyAclV2ClassifierIpPrecedence 1.3.6.1.4.1.890.1.15.3.105.1.5.1.4 integer read-only
Precedence for calssifier rule, 0~7. Value -1 means any Precedence.
                     zyAclV2ClassifierIpToS 1.3.6.1.4.1.890.1.15.3.105.1.5.1.5 integer read-only
ToS for calssifier rule, 0~127. Value -1 means any ToS.
                     zyAclV2ClassifierIpProtocol 1.3.6.1.4.1.890.1.15.3.105.1.5.1.6 integer read-only
IP Protocol for classifier rule. Value 255 means any IP protocol.
                     zyAclV2ClassifierIpEstablishOnly 1.3.6.1.4.1.890.1.15.3.105.1.5.1.7 enabledstatus read-only
Establish Only for TCP protocol type in classifier rule. This means that the switch will pick out the packets that are sent to establish TCP connections.
                     zyAclV2ClassifierIpSourceIpAddress 1.3.6.1.4.1.890.1.15.3.105.1.5.1.8 ipaddress read-only
Source IP address for classifier rule. 0.0.0.0 means any source IP address.
                     zyAclV2ClassifierIpSourceIpMaskBits 1.3.6.1.4.1.890.1.15.3.105.1.5.1.9 integer read-only
Source IP mask bits for classifier rule.
                     zyAclV2ClassifierIpDestinationIpAddress 1.3.6.1.4.1.890.1.15.3.105.1.5.1.10 ipaddress read-only
Destination IP address for classifier rule. 0.0.0.0 means any destination IP address.
                     zyAclV2ClassifierIpDestinationIpMaskBits 1.3.6.1.4.1.890.1.15.3.105.1.5.1.11 integer read-only
Destination IP mask bits for classifier rule.
                     zyAclV2ClassifierIpSourceSocketRangeStart 1.3.6.1.4.1.890.1.15.3.105.1.5.1.12 integer read-only
Source Socket Number range start for classifier rule, 0~65535. If not qualifying a range of socket numbers, the zyAclV2ClassifierSourceSocketRangeEnd is no need to configure.
                     zyAclV2ClassifierIpSourceSocketRangeEnd 1.3.6.1.4.1.890.1.15.3.105.1.5.1.13 integer read-only
Destination Socket Number range end for classifier rule. This object is not necessary.
                     zyAclV2ClassifierIpDestinationSocketRangeStart 1.3.6.1.4.1.890.1.15.3.105.1.5.1.14 integer read-only
Source Socket Number range start for classifier rule, 0~65535. If not qualifying a range of socket numbers, the zyAclV2ClassifierDestinationSocketRangeEnd is no need to configure.
                     zyAclV2ClassifierIpDestinationSocketRangeEnd 1.3.6.1.4.1.890.1.15.3.105.1.5.1.15 integer read-only
Destination Socket Number range end for classifier rule. This object is not necessary.
             zyxelAclV2ClassifierIpv6Table 1.3.6.1.4.1.890.1.15.3.105.1.6 no-access
The table contains classifier IPv6 configuration.
                 zyxelAclV2ClassifierIpv6Entry 1.3.6.1.4.1.890.1.15.3.105.1.6.1 no-access
An entry contains classifier IPv6 configuration.
                     zyAclV2ClassifierIPv6DSCP 1.3.6.1.4.1.890.1.15.3.105.1.6.1.1 integer read-only
DSCP (DiffServ Code Point) for classifier rule. The range is 0~63 and value -1 means any DSCP.
                     zyAclV2ClassifierIPv6NextHeader 1.3.6.1.4.1.890.1.15.3.105.1.6.1.2 integer read-only
IPv6 next header protocol type for classifier rule. Value 255 means any protocol type.
                     zyAclV2ClassifierIPv6EstablishOnly 1.3.6.1.4.1.890.1.15.3.105.1.6.1.3 enabledstatus read-only
Establish Only for TCP protocol type in classifier rule. This means that the switch will pick out the packets that are sent to establish TCP connections.
                     zyAclV2ClassifierIPv6SourceIpAddress 1.3.6.1.4.1.890.1.15.3.105.1.6.1.4 inetaddress read-only
IPv6 source address for classifier rule. :: means any IPv6 source ip address.
                     zyAclV2ClassifierIPv6SourceIpPrefixLength 1.3.6.1.4.1.890.1.15.3.105.1.6.1.5 integer read-only
IPv6 source address prefix length for classifier rule.
                     zyAclV2ClassifierIPv6DestinationIpAddress 1.3.6.1.4.1.890.1.15.3.105.1.6.1.6 inetaddress read-only
IPv6 destination address for classifier rule. :: means any IPv6 destination ip address.
                     zyAclV2ClassifierIPv6DestinationIpPrefixLength 1.3.6.1.4.1.890.1.15.3.105.1.6.1.7 integer read-only
IPv6 destination address prefix length for classifier rule.
             zyxelAclV2ClassifierMatchOrder 1.3.6.1.4.1.890.1.15.3.105.1.7 integer read-only
Manual or Auto to determine the rule ordering. When the match order is manual, the higher weight the higher priority. When the match order is auto, the priority is depended on the depth of the qualifier. Enumeration: 'auto': 1, 'manual': 2.
             zyxelAclV2ClassifierLoggingState 1.3.6.1.4.1.890.1.15.3.105.1.8 enabledstatus read-only
Enable/disable Logging for classifier.
             zyxelAclV2ClassifierLoggingInterval 1.3.6.1.4.1.890.1.15.3.105.1.9 integer read-only
Logging Interval for classifier, 0~65535.
         zyxelAclV2PolicyStatus 1.3.6.1.4.1.890.1.15.3.105.2
             zyxelAclV2PolicyTable 1.3.6.1.4.1.890.1.15.3.105.2.1 no-access
The table contains policy configuration.
                 zyxelAclV2PolicyEntry 1.3.6.1.4.1.890.1.15.3.105.2.1.1 no-access
An entry contains policy configuration.
                     zyAclV2PolicyName 1.3.6.1.4.1.890.1.15.3.105.2.1.1.1 displaystring no-access
The name of policy rule is used for identifying purposes.
                     zyAclV2PolicyState 1.3.6.1.4.1.890.1.15.3.105.2.1.1.2 enabledstatus read-only
Enable/Disable policy rule on this switch.
                     zyAclV2PolicyClassifier 1.3.6.1.4.1.890.1.15.3.105.2.1.1.3 displaystring read-only
The classifier(s) applies in this policy rule.
                     zyAclV2PolicyVid 1.3.6.1.4.1.890.1.15.3.105.2.1.1.4 integer read-only
VLAN ID for policy rule.
                     zyAclV2PolicyEgressPort 1.3.6.1.4.1.890.1.15.3.105.2.1.1.5 integer read-only
The outgoing port number in this policy rule.
                     zyAclV2Policy8021pPriority 1.3.6.1.4.1.890.1.15.3.105.2.1.1.6 integer read-only
Specify a 802.1p priority level for policy rule. The value of 802.1p is between 0 and 7.
                     zyAclV2PolicyDSCP 1.3.6.1.4.1.890.1.15.3.105.2.1.1.7 integer read-only
Specify a DSCP (DiffServ Code Point) for policy rule. DSCP number is between 0 and 63.
                     zyAclV2PolicyTOS 1.3.6.1.4.1.890.1.15.3.105.2.1.1.8 integer read-only
Specify the type of service (TOS) priority level for policy rule. The value of TOS is between 0 and 7.
                     zyAclV2PolicyBandwidth 1.3.6.1.4.1.890.1.15.3.105.2.1.1.9 integer read-only
Specify the bandwidth for policy rule in kilobit per second (Kbps).
                     zyAclV2PolicyOutOfProfileDSCP 1.3.6.1.4.1.890.1.15.3.105.2.1.1.10 integer read-only
Specify a new DSCP number (between 0 and 63) for policy rule if you want to replace or remark the DSCP number for out-of-profile traffic.
                     zyAclV2PolicyForwardingAction 1.3.6.1.4.1.890.1.15.3.105.2.1.1.11 integer read-only
There are three forwarding actions for policy rule. 'No change' is forward the packets. 'Discard the packet' is drop the packets. 'Do not drop the matching frame previously marked for dropping' is retain the frames that were marked to be dropped before. Enumeration: 'noChange': 1, 'doNotDropTheMatchingFramePreviouslyMarkedForDropping': 3, 'discardThePacket': 2.
                     zyAclV2PolicyPriorityAction 1.3.6.1.4.1.890.1.15.3.105.2.1.1.12 integer read-only
There are four priority actions for policy rule. 'No change' is keep the priority setting of the frames. 'Set the packet's 802.1 priority' is replace the packet's 802.1 priority field with the value you set in the Priority field. 'Send the packet to priority queue' is put the packets in the designated queue. 'Replace the 802.1 priority field with the IP TOS value' to replace the packet's 802.1 priority field with the value you set in the TOS field. 'Replace the 802.1p priority by inner 802.1p priority' to replace 802.1p priority by inner 802.1p priority if there is an inner vlan tag. Enumeration: 'replaceThe802dot1PriorityByInner802dot1Priority': 5, 'noChange': 1, 'replaceThe802dot1PriorityFieldWithTheIpTosValue': 4, 'setThePackets802dot1Priority': 2, 'sendThePacketToPriorityQueue': 3.
                     zyAclV2PolicyDiffServAction 1.3.6.1.4.1.890.1.15.3.105.2.1.1.13 integer read-only
There are four DiffServ actions for policy rule. 'No change' is keeping the TOS and/or DSCP fields in the packets. 'Set the packet's TOS field' is set the TOS field with the value you configure in the TOS field. 'Replace the IP TOS with the 802.1 priority value' is replace the TOS field with the value you configure in the Priority field. 'Set the Diffserv Codepoint field in the frame' to set the DSCP field with the value you configure in the DSCP field. Enumeration: 'noChange': 1, 'setTheDiffservCodepointFieldInTheFrame': 4, 'replaceTheIpTosFieldWithThe802dot1PriorityValue': 3, 'setThePacketsTosField': 2.
                     zyAclV2PolicyOutgoingAction 1.3.6.1.4.1.890.1.15.3.105.2.1.1.14 bits read-only
There are four outgoing actions for policy rule. 'Send the packet to the mirror port' is sent the packet to the mirror port. 'Send the packet to the egress port' is sent the packet to the egress port. 'Send the matching frames to the egress port' is sent the matching policy rule frames to the egress port. 'Set the packets VLAN ID' is set packet with tag. Bits: 'sendThePacketToTheEgressPort': 1, 'setThePacketVlanId': 3, 'sendTheMatchingFramesToTheEgressPort': 2, 'sendThePacketToTheMirrorPort': 0.
                     zyAclV2PolicyMeteringState 1.3.6.1.4.1.890.1.15.3.105.2.1.1.15 integer read-only
Enable/Disable bandwidth limitation on the traffic flow(s) then set the actions to be taken on out-of-profile packets.
                     zyAclV2PolicyOutOfProfileAction 1.3.6.1.4.1.890.1.15.3.105.2.1.1.16 bits read-only
There are four out of profile actions for policy rule. 'Drop the packet' is discard the out-of-profile traffic. 'Change the DSCP value' is replace the DSCP field with the value specified in the Out of profile DSCP field. 'Set Out-Drop Precedence' is mark out-of-profile traffic and drop it when network is congested. 'Do not drop the matching frame previously marked for dropping' to queue the frames that are marked to be dropped. Bits: 'changeTheDscpValue': 1, 'dropThePacket': 0, 'doNotDropTheMatchingFramePreviouslyMarkedForDropping': 3, 'setOutDropPrecedence': 2.
                     zyAclV2PolicyRowstatus 1.3.6.1.4.1.890.1.15.3.105.2.1.1.17 rowstatus read-only
This object shows the entry of policy rule status.
                     zyAclV2PolicyQueueAction 1.3.6.1.4.1.890.1.15.3.105.2.1.1.18 integer read-only
There are two queue actions for policy rule. 'No change' is keep the priority setting of the frames. 'Send the packet to priority queue' is put the packets in the designated queue. Enumeration: 'noChange': 1, 'sendThePacketToPriorityQueue': 2.
         zyxelAclV2TrapInfoObjects 1.3.6.1.4.1.890.1.15.3.105.3
             zyAclV2TrapClassifierLogMatchCount 1.3.6.1.4.1.890.1.15.3.105.3.1 integer no-access
display log match count of specific classifier rule.
         zyxelAclV2Notifications 1.3.6.1.4.1.890.1.15.3.105.4
             zyAclV2ClassifierLogNotification 1.3.6.1.4.1.890.1.15.3.105.4.1
classifier log information.