ZXROSNG-TPAPS-MIB: View SNMP OID List / Download MIB
VENDOR: ZHONGXING TELECOM CO.,LTD. (ABBR. ZTE)
| Home | MIB: ZXROSNG-TPAPS-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| zxAPSProtectMIB | 1.3.6.1.4.1.3902.3.6000.200 |
MIB for query status and configuration of the linear APS instance |
||
| zxAPSLineProtectTGConfigTable | 1.3.6.1.4.1.3902.3.6000.200.2 | no-access |
Configuration table of tunnel protection group's APS |
|
| 1.3.6.1.4.1.3902.3.6000.200.2.1 | no-access |
Configuration entry of tunnel protection group's APS |
||
| zxAPSLineProtectTGTGID | 1.3.6.1.4.1.3902.3.6000.200.2.1.1 | unsigned32 | no-access |
The group id of this protection group |
| zxAPSLineProtectTGActiveState | 1.3.6.1.4.1.3902.3.6000.200.2.1.2 | apsactivestate | read-only |
The active state of this protection group restoreRun(0): Restore to run APS pause(1): Pause APS |
| zxAPSLineProtectTGSendPMode | 1.3.6.1.4.1.3902.3.6000.200.2.1.3 | apssendpmode | read-only |
The protection mode of this protection group send(0): To send APS packets nosend(1): Not to send APS packets |
| zxAPSLineProtectTGHoldOffTime | 1.3.6.1.4.1.3902.3.6000.200.2.1.4 | unsigned32 | read-only |
The hold-off time of this protection group |
| zxAPSLineProtectTGRevertMode | 1.3.6.1.4.1.3902.3.6000.200.2.1.5 | apsrevertmode | read-only |
The revertive mode of this protection group revertive(0): APS is in revertive operation, which normal traffic signal is restored to the working transport entity after the condition(s) causing a switch has been cleared nonrevertive(1): APS is in non-revertive operation, which normal traffic signal is allowed to remain on the protection transport entity even after a switch reason has been cleared |
| zxAPSLineProtectTGWTRTime | 1.3.6.1.4.1.3902.3.6000.200.2.1.6 | unsigned32 | read-only |
The wait-to-restore time of this protection group |
| zxAPSLineProtectTGSwitchFlag | 1.3.6.1.4.1.3902.3.6000.200.2.1.7 | apsswitchcmd | read-only |
The switch command of this protection group none(0): The switch command hasn't been configured or has been cleared clear(1): Clear the externally initiated command and WTR lockout(2): Prevent a working signal from being selected from the protection transport entity fsP(3): Force the normal traffic to the protection entity msP(4): In the absence of a failure of a working or protection entity,Force the normal traffic to the protection entity exercise(5): Exercise of the APS protocol msW(7): Manual switch normal traffic to working |
| zxAPSLineProtectTGBridgeType | 1.3.6.1.4.1.3902.3.6000.200.2.1.8 | apsbridgetype | read-only |
The bridge type of this protection group selector(2): Selector bridge broadcast(1): Broadcast bridge |
| zxAPSLineProtectPWConfigTable | 1.3.6.1.4.1.3902.3.6000.200.3 | no-access |
Configuration table of pw group's APS |
|
| 1.3.6.1.4.1.3902.3.6000.200.3.1 | no-access |
Configuration entry of pw group's APS |
||
| zxAPSLineProtectPWName | 1.3.6.1.4.1.3902.3.6000.200.3.1.1 | displaystring | read-only |
The group name of this protection group |
| zxAPSLineProtectPWActiveState | 1.3.6.1.4.1.3902.3.6000.200.3.1.2 | apsactivestate | read-only |
The active state of this protection group restoreRun(0): Restore to run APS pause(1): Pause APS |
| zxAPSLineProtectPWSendPMode | 1.3.6.1.4.1.3902.3.6000.200.3.1.3 | apssendpmode | read-only |
The protection mode of this protection group send(0): To send APS packets nosend(1): Not to send APS packets |
| zxAPSLineProtectPWHoldOffTime | 1.3.6.1.4.1.3902.3.6000.200.3.1.4 | unsigned32 | read-only |
The hold-off time of this protection group |
| zxAPSLineProtectPWRevertMode | 1.3.6.1.4.1.3902.3.6000.200.3.1.5 | apsrevertmode | read-only |
The revertive mode of this protection group revertive(0): APS is in revertive operation, which normal traffic signal is restored to the working transport entity after the condition(s) causing a switch has been cleared nonrevertive(1): APS is in non-revertive operation, which normal traffic signal is allowed to remain on the protection transport entity even after a switch reason has been cleared |
| zxAPSLineProtectPWWTRTime | 1.3.6.1.4.1.3902.3.6000.200.3.1.6 | unsigned32 | read-only |
The wait-to-restore time of this protection group |
| zxAPSLineProtectPWSwitchFlag | 1.3.6.1.4.1.3902.3.6000.200.3.1.7 | apsswitchcmd | read-only |
The switch command of this protection group none(0): The switch command hasn't been configured or has been cleared clear(1): Clear the externally initiated command and WTR lockout(2): Prevent a working signal from being selected from the protection transport entity fsP(3): Force the normal traffic to the protection entity msP(4): In the absence of a failure of a working or protection entity,Force the normal traffic to the protection entity exercise(5): Exercise of the APS protocol msW(7): Manual switch normal traffic to working |
| zxAPSLineProtectPWBridgeType | 1.3.6.1.4.1.3902.3.6000.200.3.1.8 | apsbridgetype | read-only |
The bridge type of this protection group selector(2): Selector bridge broadcast(1): Broadcast bridge |
| zxAPSLineProtectTGStatusTable | 1.3.6.1.4.1.3902.3.6000.200.4 | no-access |
Status table of tunnel protection group's APS |
|
| 1.3.6.1.4.1.3902.3.6000.200.4.1 | no-access |
Status entry of tunnel protection group's APS |
||
| zxAPSLineProtectTGStatusTGID | 1.3.6.1.4.1.3902.3.6000.200.4.1.1 | unsigned32 | no-access |
The group id of this protection group |
| zxAPSLineProtectTGStatusState | 1.3.6.1.4.1.3902.3.6000.200.4.1.2 | apsstatusstate | read-only |
The current APS state of this protection group noRequestNull(0): There is no request or the far end has configured lockout noRequestNormal(1): The far end has request which makes normal traffic signal be selected from the protection transport entity lockout(2): Lockout has been configured forcedSwitch(3): Force switch has been configured signalFailW(4): The working transport entity has SF signalFailP(5): The protection transport entity has SF manualSwitch(6): Manual switch has been configured waitToRestore(7): SF or SD in the working transport entity has been cleared exerciseNull(8): Exercise of the APS protocol when normal traffic signal is selected from the working transport entity exerciseNormal(9): Exercise of the APS protocol when normal traffic signal is selected from the protection transport entity doNotRevert(10): There is no request after a switch reason has been cleared in non-revertive operation signalDegrW(11): The working transport entity has SD signalDegrP(12): The protection transport entity has SD manualSwitchW(13): Manual switch to working has been configured reverseRequestNull(17): Exercise has been configured at the far end and normal traffic signal is selected from the working transport entity reverseRequestNormal(18): Exercise has been configured at the far end and normal traffic signal is selected from the protection transport entity |
| zxAPSLineProtectPWStatusTable | 1.3.6.1.4.1.3902.3.6000.200.5 | no-access |
Status table of pw group's APS |
|
| 1.3.6.1.4.1.3902.3.6000.200.5.1 | no-access |
Status entry of pw group's APS |
||
| zxAPSLineProtectPWStatusPWName | 1.3.6.1.4.1.3902.3.6000.200.5.1.1 | displaystring | read-only |
The group name of this protection group |
| zxAPSLineProtectPWStatusState | 1.3.6.1.4.1.3902.3.6000.200.5.1.2 | apsstatusstate | read-only |
The current APS state of this protection group noRequestNull(0): There is no request or the far end has configured lockout noRequestNormal(1): The far end has request which makes normal traffic signal be selected from the protection transport entity lockout(2): Lockout has been configured forcedSwitch(3): Force switch has been configured signalFailW(4): The working transport entity has SF signalFailP(5): The protection transport entity has SF manualSwitch(6): Manual switch has been configured waitToRestore(7): SF or SD in the working transport entity has been cleared exerciseNull(8): Exercise of the APS protocol when normal traffic signal is selected from the working transport entity exerciseNormal(9): Exercise of the APS protocol when normal traffic signal is selected from the protection transport entity doNotRevert(10): There is no request after a switch reason has been cleared in non-revertive operation signalDegrW(11): The working transport entity has SD signalDegrP(12): The protection transport entity has SD manualSwitchW(13): Manual switch to working has been configured mappingSwitchW(15): The far end has request which makes normal traffic signal be selected from the working transport entity mappingSwitchP(16): The far end has request which makes normal traffic signal be selected from the protection transport entity reverseRequestNull(17): Exercise has been configured at the far end and normal traffic signal is selected from the working transport entity reverseRequestNormal(18): Exercise has been configured at the far end and normal traffic signal is selected from the protection transport entity |
| zxAPSLineProtectPGConfigTable | 1.3.6.1.4.1.3902.3.6000.200.6 | no-access |
Configuration table of port protection group's APS |
|
| 1.3.6.1.4.1.3902.3.6000.200.6.1 | no-access |
Configuration entry of port protection group's APS |
||
| zxAPSLineProtectPGPGID | 1.3.6.1.4.1.3902.3.6000.200.6.1.1 | unsigned32 | no-access |
The group id of this protection group |
| zxAPSLineProtectPGActiveState | 1.3.6.1.4.1.3902.3.6000.200.6.1.2 | apsactivestate | read-only |
The active state of this protection group restoreRun(0): Restore to run APS pause(1): Pause APS |
| zxAPSLineProtectPGHoldOffTime | 1.3.6.1.4.1.3902.3.6000.200.6.1.4 | unsigned32 | read-only |
The hold-off time of this protection group |
| zxAPSLineProtectPGRevertMode | 1.3.6.1.4.1.3902.3.6000.200.6.1.5 | apsrevertmode | read-only |
The revertive mode of this protection group revertive(0): APS is in revertive operation, which normal traffic signal is restored to the working transport entity after the condition(s) causing a switch has been cleared nonrevertive(1): APS is in non-revertive operation, which normal traffic signal is allowed to remain on the protection transport entity even after a switch reason has been cleared |
| zxAPSLineProtectPGWTRTime | 1.3.6.1.4.1.3902.3.6000.200.6.1.6 | unsigned32 | read-only |
The wait-to-restore time of this protection group |
| zxAPSLineProtectPGSwitchFlag | 1.3.6.1.4.1.3902.3.6000.200.6.1.7 | apsswitchcmd | read-only |
The switch command of this protection group none(0): The switch command hasn't been configured or has been cleared clear(1): Clear the externally initiated command and WTR lockout(2): Prevent a working signal from being selected from the protection transport entity fsP(3): Force the normal traffic to the protection entity msP(4): In the absence of a failure of a working or protection entity,Force the normal traffic to the protection entity exercise(5): Exercise of the APS protocol fsW(6): Forced switch normal traffic to working msW(7): Manual switch normal traffic to working |
| zxAPSLineProtectPGStatusTable | 1.3.6.1.4.1.3902.3.6000.200.7 | no-access |
Status table of port group's APS |
|
| 1.3.6.1.4.1.3902.3.6000.200.7.1 | no-access |
Status entry of port group's APS |
||
| zxAPSLineProtectPGStatusPGID | 1.3.6.1.4.1.3902.3.6000.200.7.1.1 | unsigned32 | no-access |
The group id of this protection group |
| zxAPSLineProtectPGStatusState | 1.3.6.1.4.1.3902.3.6000.200.7.1.2 | apsstatusstate | read-only |
The current APS state of this protection group noRequestNull(0): There is no request or the far end has configured lockout noRequestNormal(1): The far end has request which makes normal traffic signal be selected from the protection transport entity lockout(2): Lockout has been configured forcedSwitch(3): Force switch has been configured signalFailW(4): The working transport entity has SF signalFailP(5): The protection transport entity has SF manualSwitch(6): Manual switch has been configured waitToRestore(7): SF or SD in the working transport entity has been cleared exerciseNull(8): Exercise of the APS protocol when normal traffic signal is selected from the working transport entity exerciseNormal(9): Exercise of the APS protocol when normal traffic signal is selected from the protection transport entity doNotRevert(10): There is no request after a switch reason has been cleared in non-revertive operation signalDegrW(11): The working transport entity has SD signalDegrP(12): The protection transport entity has SD manualSwitchW(13): Manual switch to working has been configured forcedSwitchW(14): Force switch to working has been configured reverseRequestNull(17): Exercise has been configured at the far end and normal traffic signal is selected from the working transport entity reverseRequestNormal(18): Exercise has been configured at the far end and normal traffic signal is selected from the protection transport entity |