ZXR10-MPLS-TE-FRR-MIB: View SNMP OID List / Download MIB
VENDOR: ZHONGXING TELECOM CO.,LTD. (ABBR. ZTE)
| Home | MIB: ZXR10-MPLS-TE-FRR-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| zxr10MplsTeFrrMIB | 1.3.6.1.4.1.3902.3.316.1 |
Copyright (C) 2008 The IETF Trust. This version of this MIB module is part of RFC xxxx; See the RFC itself for full legal notices. This MIB module contains object definitions for MPLS Traffic Engineering facility backup method for Fast Reroute as defined in RFC4090. |
||
| mplsFrrGeneralScalars | 1.3.6.1.4.1.3902.3.316.1.1 | |||
| mplsFrrHelloEnabled | 1.3.6.1.4.1.3902.3.316.1.1.2 | integer | read-only |
Enables or disables hello message in global-configuration mode which is defined in RFC3209. Enumeration: 'enable': 1, 'disable': 0. |
| mplsFrrFacilityObjects | 1.3.6.1.4.1.3902.3.316.1.2 | |||
| mplsFrrFacilityIfTable | 1.3.6.1.4.1.3902.3.316.1.2.1 | no-access |
The mplsFrrFacilityInfTable provides information about the interface as specified by mplsFrrFacilityProtectedIfIndex. Each entry belongs to a protected interface, including statistical attributes of this interface. |
|
| 1.3.6.1.4.1.3902.3.316.1.2.1.1 | no-access |
An entry in the mplsFrrFacilityInfTable represents the statistical attributes of a FRR-configured interface. |
||
| mplsFrrFacilityConfigIfIndex | 1.3.6.1.4.1.3902.3.316.1.2.1.1.1 | unsigned32 | read-only |
Uniquely identifies the interface configured for FRR protection. If this object is set to 0, this indicates that the remaining indexing combinations for this row apply to all interfaces on this device for which the FRR feature can operate. |
| mplsFrrFacilityDBNumProtectingTunnelOnIf | 1.3.6.1.4.1.3902.3.316.1.2.1.1.2 | unsigned32 | read-only |
The number of backup tunnels protecting the interface specified by mplsFrrFacilityProtectedIfIndex. |
| mplsFrrFacilityDBNumProtectedLspOnIf | 1.3.6.1.4.1.3902.3.316.1.2.1.1.3 | unsigned32 | read-only |
The number of LSPs currently being protected on the interface specified by mplsFrrFacilityProtectedIfIndex. |
| mplsFrrFacilityDBNumProtectedTunnels | 1.3.6.1.4.1.3902.3.316.1.2.1.1.4 | unsigned32 | read-only |
The number of tunnels protected on the interface specified by mplsFrrFacilityProtectedIfIndex. |
| mplsFrrFacilityProtectingTunnelIndex | 1.3.6.1.4.1.3902.3.316.1.2.1.1.5 | displaystring | read-only |
Uniquely identifies the mplsTunnelEntry primary index for the tunnel head interface designated to protect the interface as specified in the mplsFrrFacilityProtectedIfIndex (and all of the tunnels using this interface). Note that the corresponding mplsTunnelInstance MUST BE 0 as per the indexing convention stipulated. |
| mplsFrrFacilityConfigIfName | 1.3.6.1.4.1.3902.3.316.1.2.1.1.8 | displaystring | read-only |
The name of interface configured for FRR protection. |
| mplsFrrFacilityDBTable | 1.3.6.1.4.1.3902.3.316.1.2.2 | no-access |
The mplsFrrFacilityDBTable provides summary information about the fast reroute database which indicates information of primary LSPs protected by the LSP as specified by mplsFrrFacilityProtectingTunnelIndex on the protected interface. |
|
| 1.3.6.1.4.1.3902.3.316.1.2.2.1 | no-access |
An entry in the mplsFrrFacilityDBTable represents a single protected LSP, protected by a backup tunnel on a specific protected interface. |
||
| mplsFrrFacilityProtectedIfIndex | 1.3.6.1.4.1.3902.3.316.1.2.2.1.1 | unsigned32 | read-only |
Uniquely identifies the interface configured for FRR protection. If this object is set to 0, this indicates that the remaining indexing combinations for this row apply to all interfaces on this device for which the FRR feature can operate. |
| mplsFrrFacilityPrimaryTunnelIndex | 1.3.6.1.4.1.3902.3.316.1.2.2.1.2 | unsigned32 | read-only |
Uniquely identifies the mplsTunnelEntry primary index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex. |
| mplsFrrFacilityPrimaryTunnelIngressLSRId | 1.3.6.1.4.1.3902.3.316.1.2.2.1.3 | ipaddress | read-only |
Uniquely identifies the mplsTunnelEntry third index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex. |
| mplsFrrFacilityPrimaryTunnelEgressLSRId | 1.3.6.1.4.1.3902.3.316.1.2.2.1.4 | ipaddress | read-only |
Uniquely identifies the mplsTunnelEntry fourth index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex. |
| mplsFrrFacilityPrimaryTunnelInstance | 1.3.6.1.4.1.3902.3.316.1.2.2.1.5 | unsigned32 | read-only |
Uniquely identifies the mplsTunnelEntry secondary index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex. |
| mplsFrrFacilityProtectingTunIdx | 1.3.6.1.4.1.3902.3.316.1.2.2.1.6 | unsigned32 | read-only |
Uniquely identifies the mplsTunnelEntry primary index for the tunnel head interface designated to protect the interface as specified in the mplsFrrFacilityProtectedIfIndex (and all of the tunnels using this interface). Note that the corresponding mplsTunnelInstance MUST BE 0 as per the indexing convention stipulated. |
| mplsFrrFacilityProtectedIfName | 1.3.6.1.4.1.3902.3.316.1.2.2.1.7 | displaystring | read-only |
The name of interface configured for FRR protection. |
| mplsFrrFacilityProtectingTunnelStatus | 1.3.6.1.4.1.3902.3.316.1.2.2.1.8 | integer | read-only |
Specifies the state of the protecting tunnel as specified by mplsFrrFacilityProtectingTunnelIndex. active This tunnel's label has been placed in the LFIB and is ready to be applied to incoming packets. ready - This tunnel's label entry has been created but is not yet in the LFIB. partial - This tunnel's label entry as not been fully created. Enumeration: 'active': 2, 'ready': 1, 'partial': 0. |
| mplsFrrHelloObjects | 1.3.6.1.4.1.3902.3.316.1.3 | |||
| mplsFrrHelloStatusTable | 1.3.6.1.4.1.3902.3.316.1.3.1 | no-access |
The mplsFrrHelloStatusTable provides information about the hello status database. |
|
| 1.3.6.1.4.1.3902.3.316.1.3.1.1 | no-access |
An entry in the mplsFrrHelloStatusTable represents a single hello enabled interface on local node for timely neighbor failure detection. |
||
| mplsFrrHelloEnabledIfIndex | 1.3.6.1.4.1.3902.3.316.1.3.1.1.1 | unsigned32 | read-only |
Uniquely identifies the hello enabled interface on the local node. |
| mplsFrrHelloLocalAddress | 1.3.6.1.4.1.3902.3.316.1.3.1.1.2 | ipaddress | read-only |
Uniquely identifies the local address on which hello enabled interfaces are configured for neighbor failure detection. |
| mplsFrrHelloNeighborAddress | 1.3.6.1.4.1.3902.3.316.1.3.1.1.3 | ipaddress | read-only |
Uniquely identifies the neighboring address whose status is being tracked. |
| mplsFrrHelloNeighborState | 1.3.6.1.4.1.3902.3.316.1.3.1.1.4 | integer | read-only |
Specifies the state of neighbor node as specified by mplsFrrHelloNeighborLSRID. Enumeration: 'down': 1, 'up': 2. |
| mplsFrrHelloType | 1.3.6.1.4.1.3902.3.316.1.3.1.1.5 | integer | read-only |
Indicates the way the hello enabled interface processes hello messages. active(1) : initiate to detect the state of neighbor with hello request message. passive(2) : receives and processes hello request message. Enumeration: 'active': 1, 'passive': 2. |
| mplsFrrHelloSrcInstance | 1.3.6.1.4.1.3902.3.316.1.3.1.1.6 | unsigned32 | read-only |
Represents the sender's instance. |
| mplsFrrHelloDstInstance | 1.3.6.1.4.1.3902.3.316.1.3.1.1.7 | unsigned32 | read-only |
The most recently received Src_Instance value as specified by mplsFrrHelloSrcInstance received from the neighbor. This field MUST be set to zero (0) when no value has ever been seen from the neighbor. |
| mplsFrrHelloRefreshInterval | 1.3.6.1.4.1.3902.3.316.1.3.1.1.8 | unsigned32 | read-only |
Represents the periodicity in which hello message is issued. |
| mplsFrrHelloNumRefreshMisses | 1.3.6.1.4.1.3902.3.316.1.3.1.1.9 | unsigned32 | read-only |
Represents the allowed max miss number of hello instances after which the node treat the neighbor communication has been lost. |
| mplsFrrHelloNumLosses | 1.3.6.1.4.1.3902.3.316.1.3.1.1.10 | unsigned32 | read-only |
Represents the lost count of hello instances. |
| mplsFrrHelloNumProtectedLsps | 1.3.6.1.4.1.3902.3.316.1.3.1.1.11 | unsigned32 | read-only |
Represents the number of protected LSPs. |
| mplsFrrHelloEnabledIfName | 1.3.6.1.4.1.3902.3.316.1.3.1.1.12 | displaystring | read-only |
Hello enabled interface name. |
| mplsFrrHelloConfigTable | 1.3.6.1.4.1.3902.3.316.1.3.2 | no-access |
The mplsFrrHelloConfigTable provides information about the hello configuration info on interfaces. |
|
| 1.3.6.1.4.1.3902.3.316.1.3.2.1 | no-access |
An entry in the mplsFrrHelloConfigTable represents a single hello configuration info of hello enabled interface. |
||
| mplsFrrHelloConfigIfIndex | 1.3.6.1.4.1.3902.3.316.1.3.2.1.1 | unsigned32 | read-only |
The index of interface which enables FRR hello. |
| mplsFrrHelloConfigRefreshInterval | 1.3.6.1.4.1.3902.3.316.1.3.2.1.2 | unsigned32 | read-only |
FRR Hello refresh interval on this interface. |
| mplsFrrHelloConfigRefreshMisses | 1.3.6.1.4.1.3902.3.316.1.3.2.1.3 | unsigned32 | read-only |
FRR Hello refresh misses on this interface. |
| mplsFrrHelloConfigIfName | 1.3.6.1.4.1.3902.3.316.1.3.2.1.4 | displaystring | read-only |
The name of interface which enables FRR hello. |
| mplsFrrDetourObjects | 1.3.6.1.4.1.3902.3.316.1.4 | |||
| mplsFrrDetourDBTable | 1.3.6.1.4.1.3902.3.316.1.4.1 | no-access |
The mplsFrrDetourDBTable provides summary information about the fast reroute database which indicates information of tunnels protected by detour LSP. The entries of this table are present in PLR nodes of the detour LSP. |
|
| 1.3.6.1.4.1.3902.3.316.1.4.1.1 | no-access |
An entry in the mplsFrrDetourDBEntry represents a single protected LSP, protected by a detour lsp. |
||
| mplsFrrDetourTunnelIndex | 1.3.6.1.4.1.3902.3.316.1.4.1.1.1 | unsigned32 | read-only |
Uniquely identifies the mplsTunnelEntry index for the TE tunnel LSP being protected by detour Lsp with the same tunnel index. |
| mplsFrrDetourTunnelInstance | 1.3.6.1.4.1.3902.3.316.1.4.1.1.2 | unsigned32 | read-only |
Uniquely identifies the mplsTunnelEntry secondary index for the TE tunnel LSP being protected by detour Lsp with the same tunnel instance. |
| mplsFrrDetourTunnelIngressLSRId | 1.3.6.1.4.1.3902.3.316.1.4.1.1.3 | ipaddress | read-only |
Uniquely identifies the mplsTunnelEntry third index for the TE tunnel LSP being protected by detour Lsp. |
| mplsFrrDetourTunnelEgressLSRId | 1.3.6.1.4.1.3902.3.316.1.4.1.1.4 | ipaddress | read-only |
Uniquely identifies the mplsTunnelEntry fourth index for the TE tunnel LSP being protected by detour Lsp. |
| mplsFrrDetourPrimaryLspInIntf | 1.3.6.1.4.1.3902.3.316.1.4.1.1.5 | unsigned32 | read-only |
Indicates the index of in interface of primary lsp on this node. |
| mplsFrrDetourPrimaryLspInLable | 1.3.6.1.4.1.3902.3.316.1.4.1.1.6 | unsigned32 | read-only |
Indicates the in lable of primary lsp on this node. |
| mplsFrrDetourPrimaryLspOutIntf | 1.3.6.1.4.1.3902.3.316.1.4.1.1.7 | unsigned32 | read-only |
Indicates the index of out interface of primary lsp on this node. |
| mplsFrrDetourPrimaryLspOutLable | 1.3.6.1.4.1.3902.3.316.1.4.1.1.8 | unsigned32 | read-only |
Indicates the out lable of primary lsp on this node. |
| mplsFrrDetourBackupLspInLable | 1.3.6.1.4.1.3902.3.316.1.4.1.1.9 | unsigned32 | read-only |
Indicates the in lable of detour lsp on this node. |
| mplsFrrDetourBackupLspInIntf | 1.3.6.1.4.1.3902.3.316.1.4.1.1.10 | unsigned32 | read-only |
Indicates the index of in interface of detour lsp on this node. |
| mplsFrrDetourBackupLspOutLable | 1.3.6.1.4.1.3902.3.316.1.4.1.1.11 | unsigned32 | read-only |
Indicates the out lable of detour lsp on this node. |
| mplsFrrDetourBackupLspOutIntf | 1.3.6.1.4.1.3902.3.316.1.4.1.1.12 | unsigned32 | read-only |
Indicates the index of out interface of detour lsp on this node. |
| mplsFrrDetourBackupLspNextHop | 1.3.6.1.4.1.3902.3.316.1.4.1.1.13 | ipaddress | read-only |
Indicates the next hop address of detour Lsp . |
| mplsFrrDetourProtectingLspStatus | 1.3.6.1.4.1.3902.3.316.1.4.1.1.14 | integer | read-only |
Specifies the state of the detour lsp. active This lsp's label has been placed in the LFIB and is ready to be applied to incoming packets. ready - This lsp's label entry has been created but is not yet in the LFIB. Enumeration: 'active': 2, 'ready': 1. |
| mplsFrrDetourProtecttype | 1.3.6.1.4.1.3902.3.316.1.4.1.1.15 | integer | read-only |
This object indicates the protection type provided by detour lsp. node The detour lsp is NNHop protection. link The detour lsp id NHop protection. Enumeration: 'node': 1, 'link': 2. |
| mplsFrrDetourLspTable | 1.3.6.1.4.1.3902.3.316.1.4.2 | no-access |
The mplsFrrDetourLspTable provides summary information about the detour LSP. The entries of this table are present in all LSRs on the path of the detour LSP. |
|
| 1.3.6.1.4.1.3902.3.316.1.4.2.1 | no-access |
An entry in this table represents a detour. An entry in this table is only created by an SNMP agent as instructed by an MPLS signaling protocol. |
||
| mplsFrrDetourLspIndex | 1.3.6.1.4.1.3902.3.316.1.4.2.1.1 | unsigned32 | read-only |
Uniquely identifies the mplsTunnelEntry index for the detour Lsp which is the same as th TE tunnel LSP being protected. |
| mplsFrrDetourLspInstance | 1.3.6.1.4.1.3902.3.316.1.4.2.1.2 | unsigned32 | read-only |
Uniquely identifies the mplsTunnelEntry secondary index for the detour Lsp which is the same as th TE tunnel LSP being protected. |
| mplsFrrDetourLspIngressLSRId | 1.3.6.1.4.1.3902.3.316.1.4.2.1.3 | ipaddress | read-only |
Uniquely identifies the mplsTunnelEntry third index for the detour Lsp which is the same as th TE tunnel LSP being protected. |
| mplsFrrDetourLspEgressLSRId | 1.3.6.1.4.1.3902.3.316.1.4.2.1.4 | ipaddress | read-only |
Uniquely identifies the mplsTunnelEntry fourth index for the detour Lsp which is the same as th TE tunnel LSP being protected. |
| mplsFrrDetourLspInInterface | 1.3.6.1.4.1.3902.3.316.1.4.2.1.5 | unsigned32 | read-only |
Indicates the index of in interface of the detour lsp on this node. |
| mplsFrrDetourLspOutInterface | 1.3.6.1.4.1.3902.3.316.1.4.2.1.6 | unsigned32 | read-only |
Indicates the index of out interface of the detour lsp on this node. |
| mplsFrrDetourLspType | 1.3.6.1.4.1.3902.3.316.1.4.2.1.7 | integer | read-only |
This object indicates the lsp type. plrlsp The detour lsp originated from this node. dtrLsp The detour lsp through this node. Enumeration: 'dtrLsp': 2, 'plrlsp': 1. |
| mplsFrrDetourMergeType | 1.3.6.1.4.1.3902.3.316.1.4.2.1.8 | integer | read-only |
This value represents whether or not this detour is merged. notmerged This detour is not merged. mergedwithdtr-lsp This detour is merged into another detour protecting the same tunnel. mergedwithmain This detour is merged with the protected tunnel. mergelsp Another detour lsp protecting the same tunnel is merged into this detour lsp. Enumeration: 'mergedwithmain': 2, 'mergedwithdtr-lsp': 1, 'notmerged': 0, 'mergelsp': 3. |
| mplsFrrDetourLspPLRLSRId | 1.3.6.1.4.1.3902.3.316.1.4.2.1.9 | ipaddress | read-only |
The IP address of the PLR which has initiated the detour LSP. |
| mplsFrrDetourLspAviodLSRId | 1.3.6.1.4.1.3902.3.316.1.4.2.1.10 | ipaddress | read-only |
The IP address of the node that this PLR tries to avoid. |
| mplsFrrDetourLspBandwidth | 1.3.6.1.4.1.3902.3.316.1.4.2.1.11 | unsigned32 | read-only |
The maximum bandwidth specifically reserved for the detour LSP, in units of thousands of bits per second (Kbps). |